summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet
AgeCommit message (Collapse)AuthorFilesLines
2013-09-24drivers: net: cpsw-phy-sel: Add new driver for phy mode selection for cpswMugunthan V N4-0/+172
The cpsw currently lacks code to properly set up the hardware interface mode on AM33xx. Other platforms might be equally affected. Usually, the bootloader will configure the control module register, so probably that's why such support wasn't needed in the past. In suspend mode though, this register is modified, and so it needs reprogramming after resume. This patch adds a new driver in which hardware interface can configure correct register bits when the slave is opened. The AM33xx also has a bit for each slave to configure the RMII reference clock direction. Setting it is now supported by a per-slave DT property. This code path introducted by this patch is currently exclusive for am33xx and same can be extened to various platforms via the DT compatibility property. Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Tested-by: Daniel Mack <zonque@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-24net: ethernet: cpsw: switch to devres allocationsDaniel Mack1-110/+43
This patch cleans up the allocation and error unwind paths, which allows us to carry less information in struct cpsw_priv and reduce the amount of jump labels in the probe functions. Signed-off-by: Daniel Mack <zonque@gmail.com> Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-24skge: fix invalid value passed to pci_unmap_sigleMikulas Patocka1-3/+6
In my patch c194992cbe71c20bb3623a566af8d11b0bfaa721 ("skge: fix broken driver") I didn't fix the skge bug correctly. The value of the new mapping (not old) was passed to pci_unmap_single. If we enable CONFIG_DMA_API_DEBUG, it results in this warning: WARNING: CPU: 0 PID: 0 at lib/dma-debug.c:986 check_sync+0x4c4/0x580() skge 0000:02:07.0: DMA-API: device driver tries to sync DMA memory it has not allocated [device address=0x000000023a0096c0] [size=1536 bytes] This patch makes the skge driver pass the correct value to pci_unmap_single and fixes the warning. It copies the old descriptor to on-stack variable "ee" and unmaps it if mapping of the new descriptor succeeded. This patch should be backported to 3.11-stable. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Reported-by: Francois Romieu <romieu@fr.zoreil.com> Tested-by: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-24amd/7990: Remove extern from function prototypesJoe Perches1-6/+6
There are a mix of function prototypes with and without extern in the kernel sources. Standardize on not using extern for function prototypes. Function prototypes don't need to be written with extern. extern is assumed by the compiler. Its use is as unnecessary as using auto to declare automatic/local variables in a block. Signed-off-by: Joe Perches <joe@perches.com>
2013-09-24gianfar: Remove extern from function prototypesJoe Perches1-13/+13
There are a mix of function prototypes with and without extern in the kernel sources. Standardize on not using extern for function prototypes. Function prototypes don't need to be written with extern. extern is assumed by the compiler. Its use is as unnecessary as using auto to declare automatic/local variables in a block. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-24emulex: Remove extern from function prototypesJoe Perches2-139/+123
There are a mix of function prototypes with and without extern in the kernel sources. Standardize on not using extern for function prototypes. Function prototypes don't need to be written with extern. extern is assumed by the compiler. Its use is as unnecessary as using auto to declare automatic/local variables in a block. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-24chelsio: Remove extern from function prototypesJoe Perches1-23/+23
There are a mix of function prototypes with and without extern in the kernel sources. Standardize on not using extern for function prototypes. Function prototypes don't need to be written with extern. extern is assumed by the compiler. Its use is as unnecessary as using auto to declare automatic/local variables in a block. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-24brocade: Remove extern from function prototypesJoe Perches1-22/+21
There are a mix of function prototypes with and without extern in the kernel sources. Standardize on not using extern for function prototypes. Function prototypes don't need to be written with extern. extern is assumed by the compiler. Its use is as unnecessary as using auto to declare automatic/local variables in a block. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-24broadcom: Remove extern from function prototypesJoe Perches1-2/+2
There are a mix of function prototypes with and without extern in the kernel sources. Standardize on not using extern for function prototypes. Function prototypes don't need to be written with extern. extern is assumed by the compiler. Its use is as unnecessary as using auto to declare automatic/local variables in a block. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-24atheros: Remove extern from function prototypesJoe Perches3-10/+10
There are a mix of function prototypes with and without extern in the kernel sources. Standardize on not using extern for function prototypes. Function prototypes don't need to be written with extern. extern is assumed by the compiler. Its use is as unnecessary as using auto to declare automatic/local variables in a block. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-24adi: Remove extern from function prototypesJoe Perches1-1/+1
There are a mix of function prototypes with and without extern in the kernel sources. Standardize on not using extern for function prototypes. Function prototypes don't need to be written with extern. extern is assumed by the compiler. Its use is as unnecessary as using auto to declare automatic/local variables in a block. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-248390: Remove extern from function prototypesJoe Perches1-20/+20
There are a mix of function prototypes with and without extern in the kernel sources. Standardize on not using extern for function prototypes. Function prototypes don't need to be written with extern. extern is assumed by the compiler. Its use is as unnecessary as using auto to declare automatic/local variables in a block. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-24bnx2x: handle known but unsupported VF messagesAriel Elior1-26/+24
Commit b9871bcf "bnx2x: VF RSS support - PF side" has deprecated one of the previous existing messages. If an old VF driver were to send this message to the PF then the PF will not reply and leave the mailbox in an unsteady state (and cause a timeout on the VF side). Wait until firmware ack is written before unlocking channel Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-24bnx2x: prevent masked MCP parities from appearingYuval Mintz1-0/+8
During flows which mask block attentions (e.g., register dump) all parities are masked. However, unlike other blocks the MCP's attention is not masked inside the block but rather the indication to the driver. If another attention (e.g., link change) will occour while there's an MCP parity, the driver will ignore the fact that the parity is masked and erroneously report a parity. This patch forces the driver to read the MCP masking while checking for parities. Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-24bnx2x: prevent masking error from cnicYuval Mintz1-2/+1
During error flows while loading cnic the return value was incorrectly replaced by that of bnx2x_set_real_num_queues(); If that function was to finish successfully then the cnic would have mistakenly thought the load ended successfully, causing issues (& panics) later on. Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-24bnx2x: add missing VF resource allocation during initAriel Elior1-0/+3
bnx2x_iov_static_resc() should be called after IGU was read for information on the number of available VFs, so that resources will be correctly set. Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-24bnx2x: Fix support for VFs on some PFsAriel Elior1-1/+1
Due to incorrect usage of PF macros when reading information relating to interrupts, some PFs were erroneously unable to support VFs. Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-24bnx2x: Prevent mistaken hangup between driver & FWEilon Greenstein1-9/+7
When system CPU is stressed it's possible that the driver will not be able to pulse the FW every second, which will cause the log to be filled with error messages. Increasing the threshold to 5 seconds seems to be enough to eliminate the issue. Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-24Merge branch 'for-davem' of ↵David S. Miller10-159/+807
git://git.kernel.org/pub/scm/linux/kernel/git/bwh/sfc-next Ben Hutchings says: ==================== 1. Some cleanup from Fengguang Wu and his kbuild robot. 2. Support for ethtool register dump on EF10. 3. Change soft-TSO to take advantage of firmware assistance on EF10. 4. Support for PIO TX buffers and descriptors on EF10, enabled on architectures that support write-combining mappings. 5. Accelerated RFS support for TCP/IPv6 and UDP/IPv6 on EF10. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-23bnx2x: Fix 848xx duplex settingsYaniv Rosner1-24/+33
On 848xx PHY (10G-baseT), half-duplex was always advertised regardless of the actual configuration. Change the 848xx duplex settings to advertise half-duplex only if configured. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-23bnx2x: Specific Active-DAC is not detected on 57810Yaniv Rosner1-1/+6
Fix Warpcore mode setting when active DAC (Direct Attached Cable) is detected. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-23bnx2x: 57840 non-external loopback test fail on 1GYaniv Rosner1-4/+13
when 1G-optic module was plugged in, internal loopback test failed because the driver used to check the optic module (with no need), and for 1G optic module, the link speed was forced down to 1G, while the XMAC (10G MAC) was enabled. This patch avoid accessing optic module in case internal loopback was selected, and update the link speed in case 1G optic module was detected during init stage. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-23bnx2x: KR2 disablement fixYaniv Rosner1-37/+39
Relocate bnx2x_disable_kr2 function, and use it to disable KR2 in case it is not configured in order to clear it's configuration, otherwise the link may come up at 20G instead of the requested 10G-KR. In addition, restart AN after disabling KR2 as part of the KR2 work-around. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-23bnx2x: Generalize KR work-aroundYaniv Rosner1-24/+8
Previously, in case of KR link down, the driver would reset the PHY and restart auto negotiation only when old Warpcore microcode was used (below D108). This patch comes to generalize this by keep trying to restart KR link, regardless of Warpcore microcode, since it was found that it solves another link issue which source is a link-partner. As part of this change, the signal detect is no longer a condition to apply the work-around to cover this new case. Like before, as long as the link is down, AN will be restarted every 2 seconds. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-22DMA-API: net: sfc/efx.c: replace dma_set_mask()+dma_set_coherent_mask() with ↵Russell King1-11/+1
new helper Replace the following sequence: dma_set_mask(dev, mask); dma_set_coherent_mask(dev, mask); with a call to the new helper dma_set_mask_and_coherent(). Acked-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-09-22DMA-API: net: intel/e1000: replace dma_set_mask()+dma_set_coherent_mask() ↵Russell King1-7/+2
with new helper Replace the following sequence: dma_set_mask(dev, mask); dma_set_coherent_mask(dev, mask); with a call to the new helper dma_set_mask_and_coherent(). Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-09-22DMA-API: net: emulex/benet: replace dma_set_mask()+dma_set_coherent_mask() ↵Russell King1-10/+2
with new helper Replace the following sequence: dma_set_mask(dev, mask); dma_set_coherent_mask(dev, mask); with a call to the new helper dma_set_mask_and_coherent(). Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-09-22DMA-API: net: broadcom/bnx2x: replace dma_set_mask()+dma_set_coherent_mask() ↵Russell King1-6/+2
with new helper Replace the following sequence: dma_set_mask(dev, mask); dma_set_coherent_mask(dev, mask); with a call to the new helper dma_set_mask_and_coherent(). Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-09-22DMA-API: net: broadcom/b44: replace dma_set_mask()+dma_set_coherent_mask() ↵Russell King1-2/+1
with new helper Replace the following sequence: dma_set_mask(dev, mask); dma_set_coherent_mask(dev, mask); with a call to the new helper dma_set_mask_and_coherent(). Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-09-22DMA-API: net: intel/ixgbevf: fix 32-bit DMA mask handlingRussell King1-10/+5
The fallback to 32-bit DMA mask is rather odd: if (!dma_set_mask(&pdev->dev, DMA_BIT_MASK(64)) && !dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(64))) { pci_using_dac = 1; } else { err = dma_set_mask(&pdev->dev, DMA_BIT_MASK(32)); if (err) { err = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32)); if (err) { dev_err(&pdev->dev, "No usable DMA " "configuration, aborting\n"); goto err_dma; } } pci_using_dac = 0; } This means we only set the coherent DMA mask in the fallback path if the DMA mask set failed, which is silly. This fixes it to set the coherent DMA mask only if dma_set_mask() succeeded, and to error out if either fails. Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-09-22DMA-API: net: intel/ixgbe: fix 32-bit DMA mask handlingRussell King1-10/+5
The fallback to 32-bit DMA mask is rather odd: if (!dma_set_mask(&pdev->dev, DMA_BIT_MASK(64)) && !dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(64))) { pci_using_dac = 1; } else { err = dma_set_mask(&pdev->dev, DMA_BIT_MASK(32)); if (err) { err = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32)); if (err) { dev_err(&pdev->dev, "No usable DMA configuration, aborting\n"); goto err_dma; } } pci_using_dac = 0; } This means we only set the coherent DMA mask in the fallback path if the DMA mask set failed, which is silly. This fixes it to set the coherent DMA mask only if dma_set_mask() succeeded, and to error out if either fails. Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-09-22DMA-API: net: intel/ixgb: fix 32-bit DMA mask handlingRussell King1-11/+5
The fallback to 32-bit DMA mask is rather odd: err = dma_set_mask(&pdev->dev, DMA_BIT_MASK(64)); if (!err) { err = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(64)); if (!err) pci_using_dac = 1; } else { err = dma_set_mask(&pdev->dev, DMA_BIT_MASK(32)); if (err) { err = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32)); if (err) { pr_err("No usable DMA configuration, aborting\n"); goto err_dma_mask; } } } This means we only set the coherent DMA mask in the fallback path if the DMA mask set failed, which is silly. This fixes it to set the coherent DMA mask only if dma_set_mask() succeeded, and to error out if either fails. Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-09-22DMA-API: net: intel/igbvf: fix 32-bit DMA mask handlingRussell King1-12/+6
The fallback to 32-bit DMA mask is rather odd: err = dma_set_mask(&pdev->dev, DMA_BIT_MASK(64)); if (!err) { err = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(64)); if (!err) pci_using_dac = 1; } else { err = dma_set_mask(&pdev->dev, DMA_BIT_MASK(32)); if (err) { err = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32)); if (err) { dev_err(&pdev->dev, "No usable DMA " "configuration, aborting\n"); goto err_dma; } } } This means we only set the coherent DMA mask in the fallback path if the DMA mask set failed, which is silly. This fixes it to set the coherent DMA mask only if dma_set_mask() succeeded, and to error out if either fails. Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-09-22DMA-API: net: intel/igb: fix 32-bit DMA mask handlingRussell King1-12/+6
The fallback to 32-bit DMA mask is rather odd: err = dma_set_mask(&pdev->dev, DMA_BIT_MASK(64)); if (!err) { err = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(64)); if (!err) pci_using_dac = 1; } else { err = dma_set_mask(&pdev->dev, DMA_BIT_MASK(32)); if (err) { err = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32)); if (err) { dev_err(&pdev->dev, "No usable DMA configuration, aborting\n"); goto err_dma; } } } This means we only set the coherent DMA mask in the fallback path if the DMA mask set failed, which is silly. This fixes it to set the coherent DMA mask only if dma_set_mask() succeeded, and to error out if either fails. Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-09-22DMA-API: net: intel/e1000e: fix 32-bit DMA mask handlingRussell King1-12/+6
The fallback to 32-bit DMA mask is rather odd: err = dma_set_mask(&pdev->dev, DMA_BIT_MASK(64)); if (!err) { err = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(64)); if (!err) pci_using_dac = 1; } else { err = dma_set_mask(&pdev->dev, DMA_BIT_MASK(32)); if (err) { err = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32)); if (err) { dev_err(&pdev->dev, "No usable DMA configuration, aborting\n"); goto err_dma; } } } This means we only set the coherent DMA mask in the fallback path if the DMA mask set failed, which is silly. This fixes it to set the coherent DMA mask only if dma_set_mask() succeeded, and to error out if either fails. Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2013-09-21tg3: Update version to 3.134Nithin Sujir1-2/+2
Signed-off-by: Nithin Nayak Sujir <nsujir@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-21tg3: Remove unnecessary spinlockNithin Sujir1-2/+0
The spinlock is not needed after conversion of tg3_flags from array to set_bit(). Signed-off-by: Nithin Nayak Sujir <nsujir@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-21tg3: Appropriately classify interrupts during request_irqNithin Sujir1-1/+12
Distinguish between tx, rx and txrx interrupts. Signed-off-by: Nithin Nayak Sujir <nsujir@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-21tg3: Remove redundant if checkNithin Sujir1-4/+1
Signed-off-by: Nithin Nayak Sujir <nsujir@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-21tg3: Remove if 0'd codeNithin Sujir1-18/+0
Signed-off-by: Nithin Nayak Sujir <nsujir@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-21tg3: LED in shared mode does not blink during trafficNithin Sujir1-0/+6
On the 5717, 5719, 5720 and 5762 devices, in shared link/activity mode, the blink rate must be overridden with all bits set. Signed-off-by: Nithin Nayak Sujir <nsujir@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-21tg3: Add support for new 577xx device idsNithin Sujir2-2/+16
This patch adds support for 57764, 57765, 57787, 57782 and 57786 devices. Signed-off-by: Nithin Nayak Sujir <nsujir@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-21tg3: Add function tg3_phy_shdw_write()Nithin Sujir1-8/+10
For consistency with other register access functions, add shadow register access function of the type (register/val). Signed-off-by: Nithin Nayak Sujir <nsujir@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-20declance: Remove `incompatible pointer type' warningsMaciej W. Rozycki1-8/+8
Revert damage caused by 43d620c82985b19008d87a437b4cf83f356264f7: .../declance.c: In function 'cp_to_buf': .../declance.c:347: warning: assignment from incompatible pointer type .../declance.c:348: warning: assignment from incompatible pointer type .../declance.c: In function 'cp_from_buf': .../declance.c:406: warning: assignment from incompatible pointer type .../declance.c:407: warning: assignment from incompatible pointer type Also add a `const' qualifier where applicable and adjust formatting. Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-20net: cxgb4vf: Staticize local symbolsSachin Kamat1-5/+6
Local symbols used only in this file are made static. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Cc: Casey Leedom <leedom@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-20net: bnx2x: Staticize local symbolsSachin Kamat1-3/+4
Local symbols used only in this file are made static. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Cc: Eilon Greenstein <eilong@broadcom.com> Cc: Ariel Elior <ariele@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-20net: emaclite: Code cleanupMichal Simek1-14/+14
No function changes (s/\ \t/\t/g) Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-20net: emaclite: Not necessary to call devm_iounmapMichal Simek1-8/+3
devm_iounmap is called automatically. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-09-20sfc: Support ARFS for IPv6 flowsBen Hutchings1-28/+62
Extend efx_filter_rfs() to map TCP/IPv6 and UDP/IPv6 flows into efx_filter_spec. These are only supported on EF10; on Falcon and Siena they will be rejected by efx_farch_filter_from_gen_spec(). Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2013-09-20sfc: Use TX PIO for sufficiently small packetsJon Cooper4-0/+155
Sufficiently small linear packets can be copied into the PIO buffer with a single call to memcpy_toio(). Non-linear packets require an intermediate cache-line-sized buffer. [bwh: I wrote the first version of this, but Jon did the hard work to handle non-linear packets.] Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-10-03 22:31:29 +0300