| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
[ Upstream commit 321421b57a12e933f92b228e0e6d0b2c6541f41d ]
While issuing VF Reset from the guest OS, the VF driver prints
logs about critical / Overflow error detection. This is not an
actual error since the VF_MBX_ARQLEN register is set to all FF's
for a short period of time and the VF would catch the bits set if
it was reading the register during that spike of time.
This patch introduces an additional check to ignore this condition
since the VF is in reset.
Fixes: 19b73d8efaa4 ("i40evf: Add additional check for reset")
Signed-off-by: Surabhi Boob <surabhi.boob@intel.com>
Tested-by: Tony Brelinski <tony.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 131b0edc4028bb88bb472456b1ddba526cfb7036 ]
In some cases, the ethtool get_rxfh handler may be called with a null
key or indir parameter. So check these pointers, or you will have a very
bad day.
Fixes: 43a3d9ba34c9 ("i40evf: Allow PF driver to configure RSS")
Signed-off-by: Mitch Williams <mitch.a.williams@intel.com>
Tested-by: Tony Brelinski <tony.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 4f0400803818f2642f066d3eacaf013f23554cc7 ]
In iavf_config_clsflower, the filter structure could be accidentally
released at the end, if iavf_parse_cls_flower or iavf_handle_tclass ever
return a non-zero but positive value.
In this case, the function continues through to the end, and will call
kfree() on the filter structure even though it has been added to the
linked list.
This can actually happen because iavf_parse_cls_flower will return
a positive IAVF_ERR_CONFIG value instead of the traditional negative
error codes.
Fix this by ensuring that the kfree() check and error checks are
similar. Use the more idiomatic "if (err)" to catch all non-zero error
codes.
Fixes: 0075fa0fadd0 ("i40evf: Add support to apply cloud filters")
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Tony Brelinski <tony.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 8905072a192fffe9389255489db250c73ecab008 ]
The driver could only quit allmulti when allmulti and promisc modes are
turn on at the same time. If promisc had been off there was no way to turn
off allmulti mode.
The patch corrects this behavior. Switching allmulti does not depends on
promisc state mode anymore
Fixes: f42a5c74da99 ("i40e: Add allmulti support for the VF")
Signed-off-by: Piotr Marczak <piotr.marczak@intel.com>
Tested-by: Tony Brelinski <tony.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 2135a8d5c8186bc92901dc00f179ffd50e54c2ac ]
In iavf_configure_clsflower() the function will bail out if it is unable
to obtain the crit_section lock in a reasonable time. However, it will
clear the lock when exiting, so fix this.
Fixes: 640a8af5841f ("i40evf: Reorder configure_clsflower to avoid deadlock on error")
Signed-off-by: Nicholas Nunley <nicholas.d.nunley@intel.com>
Tested-by: Tony Brelinski <tony.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 89f22f129696ab53cfbc608e0a2184d0fea46ac1 ]
iavf_free_queues() clears adapter->num_active_queues, which
iavf_free_q_vectors() relies on, so swap the order of these two function
calls in iavf_disable_vf(). This resolves a panic encountered when the
interface is disabled and then later brought up again after PF
communication is restored.
Fixes: 65c7006f234c ("i40evf: assign num_active_queues inside i40evf_alloc_queues")
Signed-off-by: Nicholas Nunley <nicholas.d.nunley@intel.com>
Tested-by: Tony Brelinski <tony.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 8a4a126f4be88eb8b5f00a165ab58c35edf4ef76 ]
If the driver has lost contact with the PF then it enters a disabled state
and frees adapter->vf_res. However, ndo_fix_features can still be called on
the interface, so we need to check for this condition first. Since we have
no information on the features at this time simply leave them unmodified
and return.
Fixes: c4445aedfe09 ("i40evf: Fix VLAN features")
Signed-off-by: Nicholas Nunley <nicholas.d.nunley@intel.com>
Tested-by: Tony Brelinski <tony.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 4e5e6b5d9d1334d3490326b6922a2daaf56a867f ]
Fixed return correct code from set the new channel count.
Implemented by check if reset is done in appropriate time.
This solution give a extra time to pf for reset vf in case
when user want set new channel count for all vfs.
Without this patch it is possible to return misleading output
code to user and vf reset not to be correctly performed by pf.
Fixes: 5520deb15326 ("iavf: Enable support for up to 16 queues")
Signed-off-by: Grzegorz Szczurek <grzegorzx.szczurek@intel.com>
Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit b0757491a118ae5727cf9f1c3a11544397d46596 ]
The driver does not check if hw-tc-offload is enabled for the device
before offloading a flow in the context of indirect block callback.
Fix this by checking NETIF_F_HW_TC in the features flag and rejecting
the offload request. This will avoid unnecessary dmesg error logs when
hw-tc-offload is disabled, such as these:
bnxt_en 0000:19:00.1 eno2np1: dev(ifindex=294) not on same switch
bnxt_en 0000:19:00.1 eno2np1: Error: bnxt_tc_add_flow: cookie=0xffff8dace1c88000 error=-22
bnxt_en 0000:19:00.0 eno1np0: dev(ifindex=294) not on same switch
bnxt_en 0000:19:00.0 eno1np0: Error: bnxt_tc_add_flow: cookie=0xffff8dace1c88000 error=-22
Reported-by: Marcelo Ricardo Leitner <mleitner@redhat.com>
Fixes: 627c89d00fb9 ("bnxt_en: flow_offload: offload tunnel decap rules via indirect callbacks")
Signed-off-by: Sriharsha Basavapatna <sriharsha.basavapatna@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit f8885ac89ce310570e5391fe0bf0ec9c7c9b4fdc ]
Smatch says:
bnx2x_init_ops.h:640 bnx2x_ilt_client_mem_op()
warn: variable dereferenced before check 'ilt' (see line 638)
Move ilt_cli variable initialization _after_ ilt validation, because
it's unsafe to deref the pointer before validation check.
Fixes: 523224a3b3cd ("bnx2x, cnic, bnx2i: use new FW/HSI")
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 4ca110bf8d9b31a60f8f8ff6706ea147d38ad97c ]
Ensure diagnostics monitoring support is implemented for the SFF 8472
compliant port module and set the correct length for ethtool port
module eeprom read.
Fixes: f56ec6766dcf ("cxgb4: Add support for ethtool i2c dump")
Signed-off-by: Manoj Malviya <manojmalviya@chelsio.com>
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit bb7bbb6e36474933540c24ae1f1ad651b843981f ]
Commit bfe301ebbc94 ("net: mvpp2: convert to use
mac_prepare()/mac_finish()") introduced a bug wherein it leaves the MAC
RESET register asserted after mac_finish(), due to wrong order of
function calls.
Before it was:
.mac_config()
mvpp22_mode_reconfigure()
assert reset
mvpp2_xlg_config()
deassert reset
Now it is:
.mac_prepare()
.mac_config()
mvpp2_xlg_config()
deassert reset
.mac_finish()
mvpp2_xlg_config()
assert reset
Obviously this is wrong.
This bug is triggered when phylink tries to change the PHY interface
mode from a GMAC mode (sgmii, 1000base-x, 2500base-x) to XLG mode
(10gbase-r, xaui). The XLG mode does not work since reset is left
asserted. Only after
ifconfig down && ifconfig up
is called will the XLG mode work.
Move the call to mvpp22_mode_reconfigure() to .mac_prepare()
implementation. Since some of the subsequent functions need to know
whether the interface is being changed, we unfortunately also need to
pass around the new interface mode before setting port->phy_interface.
Fixes: bfe301ebbc94 ("net: mvpp2: convert to use mac_prepare()/mac_finish()")
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 7a166854b4e24c57d56b3eba9fe1594985ee0a2c ]
It is spurious to allocate a bitmap without initializing it.
So, better safe than sorry, initialize it to 0 at least to have some known
values.
While at it, switch to the devm_bitmap_ API which is less verbose.
Fixes: 4b41d3436796 ("net: ethernet: ti: cpsw: allow untagged traffic on host port")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit f64ab8e4f368f48afb08ae91928e103d17b235e9 ]
Commit fe28c53ed71d ("net: stmmac: fix taprio configuration when
base_time is in the past") allowed some base time values in the past,
but apparently not all, the base-time value of 0 (Jan 1st 1970) is still
explicitly denied by the driver.
Remove the bogus check.
Fixes: b60189e0392f ("net: stmmac: Integrate EST with TAPRIO scheduler API")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 688db0c7a4a69ddc8b8143a1cac01eb20082a3aa ]
Currently, driver only allow configuring ETS bandwidth of TCs according
to the max TC number queried from firmware. However, the hardware actually
supports 8 TCs and users may need to configure ETS bandwidth of all TCs,
so remove the restriction.
Fixes: 330baff5423b ("net: hns3: add ETS TC weight setting in SSU module")
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit e140c7983e3054be0652bf914f4454f16c5520b0 ]
When fully configure VLANs for a VF, then unload the VF while
triggering a reset to PF, will cause a kernel crash because the
irq is already uninit.
[ 293.177579] ------------[ cut here ]------------
[ 293.183502] kernel BUG at drivers/pci/msi.c:352!
[ 293.189547] Internal error: Oops - BUG: 0 [#1] SMP
......
[ 293.390124] Workqueue: hclgevf hclgevf_service_task [hclgevf]
[ 293.402627] pstate: 80c00009 (Nzcv daif +PAN +UAO)
[ 293.414324] pc : free_msi_irqs+0x19c/0x1b8
[ 293.425429] lr : free_msi_irqs+0x18c/0x1b8
[ 293.436545] sp : ffff00002716fbb0
[ 293.446950] x29: ffff00002716fbb0 x28: 0000000000000000
[ 293.459519] x27: 0000000000000000 x26: ffff45b91ea16b00
[ 293.472183] x25: 0000000000000000 x24: ffffa587b08f4700
[ 293.484717] x23: ffffc591ac30e000 x22: ffffa587b08f8428
[ 293.497190] x21: ffffc591ac30e300 x20: 0000000000000000
[ 293.509594] x19: ffffa58a062a8300 x18: 0000000000000000
[ 293.521949] x17: 0000000000000000 x16: ffff45b91dcc3f48
[ 293.534013] x15: 0000000000000000 x14: 0000000000000000
[ 293.545883] x13: 0000000000000040 x12: 0000000000000228
[ 293.557508] x11: 0000000000000020 x10: 0000000000000040
[ 293.568889] x9 : ffff45b91ea1e190 x8 : ffffc591802d0000
[ 293.580123] x7 : ffffc591802d0148 x6 : 0000000000000120
[ 293.591190] x5 : ffffc591802d0000 x4 : 0000000000000000
[ 293.602015] x3 : 0000000000000000 x2 : 0000000000000000
[ 293.612624] x1 : 00000000000004a4 x0 : ffffa58a1e0c6b80
[ 293.623028] Call trace:
[ 293.630340] free_msi_irqs+0x19c/0x1b8
[ 293.638849] pci_disable_msix+0x118/0x140
[ 293.647452] pci_free_irq_vectors+0x20/0x38
[ 293.656081] hclgevf_uninit_msi+0x44/0x58 [hclgevf]
[ 293.665309] hclgevf_reset_rebuild+0x1ac/0x2e0 [hclgevf]
[ 293.674866] hclgevf_reset+0x358/0x400 [hclgevf]
[ 293.683545] hclgevf_reset_service_task+0xd0/0x1b0 [hclgevf]
[ 293.693325] hclgevf_service_task+0x4c/0x2e8 [hclgevf]
[ 293.702307] process_one_work+0x1b0/0x448
[ 293.710034] worker_thread+0x54/0x468
[ 293.717331] kthread+0x134/0x138
[ 293.724114] ret_from_fork+0x10/0x18
[ 293.731324] Code: f940b000 b4ffff00 a903e7b8 f90017b6 (d4210000)
This patch fixes the problem by waiting for the VF reset done
while unloading the VF.
Fixes: e2cb1dec9779 ("net: hns3: Add HNS3 VF HCL(Hardware Compatibility Layer) Support")
Signed-off-by: Yufeng Mo <moyufeng@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 0b653a81a26d66ffe526a54c2177e24fb1400301 ]
Currently, driver will send command to firmware to query pfc packet number
when user uses dcb tool to get pfc parameters. However, the periodic
service task will also periodically query and record MAC statistics,
including pfc packet number.
As the hardware registers of statistics is cleared after reading, it will
cause pfc packet number of MAC statistics are not correct after using dcb
tool to get pfc parameters.
To fix this problem, when user uses dcb tool to get pfc parameters, driver
updates MAC statistics firstly and then get pfc packet number from MAC
statistics.
Fixes: 64fd2300fcc1 ("net: hns3: add support for querying pfc puase packets statistic")
Signed-off-by: Jie Wang <wangjie125@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit beb27ca451a57a1c0e52b5268703f3c3173c1f8c ]
Currently, NIC init ROCE interrupt vector with MSIX interrupt. But ROCE use
pci_irq_vector() to get interrupt vector, which adds the relative interrupt
vector again and gets wrong interrupt vector.
So fixes it by assign relative interrupt vector to ROCE instead of MSIX
interrupt vector and delete the unused struct member base_msi_vector
declaration of hclgevf_dev.
Fixes: 46a3df9f9718 ("net: hns3: Add HNS3 Acceleration Engine & Compatibility Layer Support")
Signed-off-by: Jie Wang <wangjie125@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 1c360cc1cc883fbdf0a258b4df376571fbeac5ee ]
The priv->ntfy_blocks[] has "priv->num_ntfy_blks" elements so this >
needs to be >= to prevent an off by one bug. The priv->ntfy_blocks[]
array is allocated in gve_alloc_notify_blocks().
Fixes: 87a7f321bb6a ("gve: Recover from queue stall due to missed IRQ")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit c45231a7668d6b632534f692b10592ea375b55b0 ]
'netdev' is a managed resource allocated in the probe using
'devm_alloc_etherdev()'.
It must not be freed explicitly in the remove function.
Fixes: ee7da21ac4c3 ("net: Add driver for LiteX's LiteETH network interface")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 9cbc3367968de69017a87a1118b62490ac1bdd0a ]
The octeontx2 pf nic driver failsz to link when the devlink support
is not reachable:
aarch64-linux-ld: drivers/net/ethernet/marvell/octeontx2/nic/otx2_devlink.o: in function `otx2_dl_mcam_count_get':
otx2_devlink.c:(.text+0x10): undefined reference to `devlink_priv'
aarch64-linux-ld: drivers/net/ethernet/marvell/octeontx2/nic/otx2_devlink.o: in function `otx2_dl_mcam_count_validate':
otx2_devlink.c:(.text+0x50): undefined reference to `devlink_priv'
aarch64-linux-ld: drivers/net/ethernet/marvell/octeontx2/nic/otx2_devlink.o: in function `otx2_dl_mcam_count_set':
otx2_devlink.c:(.text+0xd0): undefined reference to `devlink_priv'
aarch64-linux-ld: drivers/net/ethernet/marvell/octeontx2/nic/otx2_devlink.o: in function `otx2_devlink_info_get':
otx2_devlink.c:(.text+0x150): undefined reference to `devlink_priv'
This is already selected by the admin function driver, but not the
actual nic, which might be built-in when the af driver is not.
Fixes: 2da489432747 ("octeontx2-pf: devlink params support to set mcam entry count")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit b385cca47363316c6d9a74ae9db407bbc281f815 ]
When a VF is removed and/or reset its Tx queues need to be
stopped from the PF. This is done by calling the ice_dis_vf_qs()
function, which calls ice_vsi_stop_lan_tx_rings(). Currently
ice_dis_vf_qs() is protected by the VF state bit ICE_VF_STATE_QS_ENA.
Unfortunately, this is causing the Tx queues to not be disabled in some
cases and when the VF tries to re-enable/reconfigure its Tx queues over
virtchnl the op is failing. This is because a VF can be reset and/or
removed before the ICE_VF_STATE_QS_ENA bit is set, but the Tx queues
were already configured via ice_vsi_cfg_single_txq() in the
VIRTCHNL_OP_CONFIG_VSI_QUEUES op. However, the ICE_VF_STATE_QS_ENA bit
is set on a successful VIRTCHNL_OP_ENABLE_QUEUES, which will always
happen after the VIRTCHNL_OP_CONFIG_VSI_QUEUES op.
This was causing the following error message when loading the ice
driver, creating VFs, and modifying VF trust in an endless loop:
[35274.192484] ice 0000:88:00.0: Failed to set LAN Tx queue context, error: ICE_ERR_PARAM
[35274.193074] ice 0000:88:00.0: VF 0 failed opcode 6, retval: -5
[35274.193640] iavf 0000:88:01.0: PF returned error -5 (IAVF_ERR_PARAM) to our request 6
Fix this by always calling ice_dis_vf_qs() and silencing the error
message in ice_vsi_stop_tx_ring() since the calling code ignores the
return anyway. Also, all other places that call ice_vsi_stop_tx_ring()
catch the error, so this doesn't affect those flows since there was no
change to the values the function returns.
Other solutions were considered (i.e. tracking which VF queues had been
"started/configured" in VIRTCHNL_OP_CONFIG_VSI_QUEUES, but it seemed
more complicated than it was worth. This solution also brings in the
chance for other unexpected conditions due to invalid state bit checks.
So, the proposed solution seemed like the best option since there is no
harm in failing to stop Tx queues that were never started.
This issue can be seen using the following commands:
for i in {0..50}; do
rmmod ice
modprobe ice
sleep 1
echo 1 > /sys/class/net/ens785f0/device/sriov_numvfs
echo 1 > /sys/class/net/ens785f1/device/sriov_numvfs
ip link set ens785f1 vf 0 trust on
ip link set ens785f0 vf 0 trust on
sleep 2
echo 0 > /sys/class/net/ens785f0/device/sriov_numvfs
echo 0 > /sys/class/net/ens785f1/device/sriov_numvfs
sleep 1
echo 1 > /sys/class/net/ens785f0/device/sriov_numvfs
echo 1 > /sys/class/net/ens785f1/device/sriov_numvfs
ip link set ens785f1 vf 0 trust on
ip link set ens785f0 vf 0 trust on
done
Fixes: 77ca27c41705 ("ice: add support for virtchnl_queue_select.[tx|rx]_queues bitmap")
Signed-off-by: Brett Creeley <brett.creeley@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit ce572a5b88d5ca6737b5e23da9892792fd708ad3 ]
VF was not able to change its hardware MAC address in case
the new address was already present in the MAC filter list.
Change the handling of VF add mac request to not return
if requested MAC address is already present on the list
and check if its hardware MAC needs to be updated in this case.
Fixes: ed4c068d46f6 ("ice: Enable ip link show on the PF to display VF unicast MAC(s)")
Signed-off-by: Sylwester Dziedziuch <sylwesterx.dziedziuch@intel.com>
Tested-by: Tony Brelinski <tony.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit d52bcb47bdf971a59a2467975d2405fcfcb2fa19 ]
This patch allows to use 0 for `coal->rx_coalesce_usecs` param to
disable rx irq coalescing.
Previously we could enable rx irq coalescing via ethtool
(For ex: `ethtool -C eth0 rx-usecs 2000`) but we couldn't disable
it because this part rejects 0 value:
if (!coal->rx_coalesce_usecs)
return -EINVAL;
Fixes: 84da2658a619 ("TI DaVinci EMAC : Implement interrupt pacing functionality.")
Signed-off-by: Maxim Kiselev <bigunclemax@gmail.com>
Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com>
Link: https://lore.kernel.org/r/20211101152343.4193233-1-bigunclemax@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 6b278c0cb378079f3c0c61ae4a369c09ff1a4188 ]
If we get CRQ_INIT, we set errno to -EIO and first call complete() to
notify the waiter. Then we try to schedule a FAILOVER reset. If this
occurs while adapter is in PROBING state, ibmvnic_reset() changes the
error code to EAGAIN and returns without scheduling the FAILOVER. The
purpose of setting error code to EAGAIN is to ask the waiter to retry.
But due to the earlier complete() call, the waiter may already have seen
the -EIO response and decided not to retry. This can cause intermittent
failures when bringing up ibmvnic adapters during boot, specially in
in kexec/kdump kernels.
Defer the complete() call until after scheduling the reset.
Also streamline the error code to EAGAIN. Don't see why we need EIO
sometimes. All 3 callers of ibmvnic_reset_init() can handle EAGAIN.
Fixes: 17c8705838a5 ("ibmvnic: Return error code if init interrupted by transport event")
Reported-by: Vaishnavi Bhat <vaish123@in.ibm.com>
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.ibm.com>
Reviewed-by: Dany Madden <drt@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 6e20d00158f31f7631d68b86996b7e951c4451c8 ]
Soon after registering a CRQ it is possible that we get a fail over or
maybe a CRQ_INIT from the VIOS while interrupts were disabled.
Look for any such CRQs after enabling interrupts.
Otherwise we can intermittently fail to bring up ibmvnic adapters during
boot, specially in kexec/kdump kernels.
Fixes: 032c5e82847a ("Driver for IBM System i/p VNIC protocol")
Reported-by: Vaishnavi Bhat <vaish123@in.ibm.com>
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.ibm.com>
Reviewed-by: Dany Madden <drt@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 8878e46fcfd46b19964bd90e13b25dd94cbfc9be ]
If adapter's resetting bit is on, discard the packet but don't stop the
transmit queue - instead leave that to the reset code. With this change,
it is possible that we may get several calls to ibmvnic_xmit() that simply
discard packets and return.
But if we stop the queue here, we might end up doing so just after
__ibmvnic_open() started the queues (during a hard/soft reset) and before
the ->resetting bit was cleared. If that happens, there will be no one to
restart queue and transmissions will be blocked indefinitely.
This can cause a TIMEOUT reset and with auto priority failover enabled,
an unnecessary FAILOVER reset to less favored backing device and then a
FAILOVER back to the most favored backing device. If we hit the window
repeatedly, we can get stuck in a loop of TIMEOUT, FAILOVER, FAILOVER
resets leaving the adapter unusable for extended periods of time.
Fixes: 7f5b030830fe ("ibmvnic: Free skb's in cases of failure in transmit")
Reported-by: Abdul Haleem <abdhalee@in.ibm.com>
Reported-by: Vaishnavi Bhat <vaish123@in.ibm.com>
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.ibm.com>
Reviewed-by: Dany Madden <drt@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 17e712c6a1bade9dac02a7bf2b464746faa7e9a0 ]
When port is linked down, the process which has acquired rtnl_lock
will wait for the in-progress dim work to finish, and the work also
acquires rtnl_lock, which may cause deadlock.
Currently IRQ_MOD registers can be configured by `ethtool -C` and
dim work, and which will take effect depends on the execution order,
rtnl_lock is useless here, so remove them.
Fixes: 9d32e4e7e9e1 ("nfp: add support for coalesce adaptive feature")
Signed-off-by: Yinjun Zhang <yinjun.zhang@corigine.com>
Signed-off-by: Louis Peens <louis.peens@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit f8d384a640dd32aaf0a05fec137ccbf0e986b09f ]
Each rx/tx ring has a related dim work, when rx/tx ring number is
decreased by `ethtool -L`, the corresponding rx_ring or tx_ring is
assigned NULL, while its related work is not destroyed. When scheduled,
the work will access NULL pointer.
Fixes: 9d32e4e7e9e1 ("nfp: add support for coalesce adaptive feature")
Signed-off-by: Yinjun Zhang <yinjun.zhang@corigine.com>
Signed-off-by: Louis Peens <louis.peens@corigine.com>
Signed-off-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit daf182d360e509a494db18666799f4e85d83dda0 ]
For each rate change command submission, the FW has to do a phy
power off sequence internally. For this to happen correctly, the
PLL re-initialization control setting has to be turned off before
sending mailbox commands and re-enabled once the command submission
is complete.
Without the PLL control setting, the link up takes longer time in a
fixed phy configuration.
Fixes: 47f164deab22 ("amd-xgbe: Add PCI device support")
Co-developed-by: Sudheesh Mavila <sudheesh.mavila@amd.com>
Signed-off-by: Sudheesh Mavila <sudheesh.mavila@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit cd4bc63de774eee95e9bac26a565cd80e0fca421 ]
Coverity complains of a possible dereference of a null return value.
5. returned_null: kzalloc returns NULL. [show details]
6. var_assigned: Assigning: si_data = NULL return value from kzalloc.
488 si_data = kzalloc(data_size, __GFP_DMA | GFP_KERNEL);
489 cbd.length = cpu_to_le16(data_size);
490
491 dma = dma_map_single(&priv->si->pdev->dev, si_data,
492 data_size, DMA_FROM_DEVICE);
While this kzalloc() is unlikely to fail, I did notice that the function
returned without unmapping si_data.
Fix this by refactoring the error paths and checking for kzalloc()
failure.
Fixes: 888ae5a3952ba ("net: enetc: add tc flower psfp offload driver")
Cc: Claudiu Manoil <claudiu.manoil@nxp.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: netdev@vger.kernel.org
Cc: linux-kernel@vger.kernel.org (open list)
Signed-off-by: Tim Gardner <tim.gardner@canonical.com>
Acked-by: Claudiu Manoil <claudiu.manoil@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 19757cebf0c5016a1f36f7fe9810a9f0b33c0832 ]
Use of percpu_counter structure to track count of orphaned
sockets is causing problems on modern hosts with 256 cpus
or more.
Stefan Bach reported a serious spinlock contention in real workloads,
that I was able to reproduce with a netfilter rule dropping
incoming FIN packets.
53.56% server [kernel.kallsyms] [k] queued_spin_lock_slowpath
|
---queued_spin_lock_slowpath
|
--53.51%--_raw_spin_lock_irqsave
|
--53.51%--__percpu_counter_sum
tcp_check_oom
|
|--39.03%--__tcp_close
| tcp_close
| inet_release
| inet6_release
| sock_close
| __fput
| ____fput
| task_work_run
| exit_to_usermode_loop
| do_syscall_64
| entry_SYSCALL_64_after_hwframe
| __GI___libc_close
|
--14.48%--tcp_out_of_resources
tcp_write_timeout
tcp_retransmit_timer
tcp_write_timer_handler
tcp_write_timer
call_timer_fn
expire_timers
__run_timers
run_timer_softirq
__softirqentry_text_start
As explained in commit cf86a086a180 ("net/dst: use a smaller percpu_counter
batch for dst entries accounting"), default batch size is too big
for the default value of tcp_max_orphans (262144).
But even if we reduce batch sizes, there would still be cases
where the estimated count of orphans is beyond the limit,
and where tcp_too_many_orphans() has to call the expensive
percpu_counter_sum_positive().
One solution is to use plain per-cpu counters, and have
a timer to periodically refresh this cache.
Updating this cache every 100ms seems about right, tcp pressure
state is not radically changing over shorter periods.
percpu_counter was nice 15 years ago while hosts had less
than 16 cpus, not anymore by current standards.
v2: Fix the build issue for CONFIG_CRYPTO_DEV_CHELSIO_TLS=m,
reported by kernel test robot <lkp@intel.com>
Remove unused socket argument from tcp_too_many_orphans()
Fixes: dd24c00191d5 ("net: Use a percpu_counter for orphan_count")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Stefan Bach <sfb@google.com>
Cc: Neal Cardwell <ncardwell@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit a3d708925fcca1a2f7219bc9ce93e6341f85c1e0 ]
On i386, when builtin (not a loadable module), the winbond-840 driver
inspects boot_cpu_data to see what CPU family it is running on, and
then acts on that data. The "family" struct member (x86) does not exist
when running on UML, so prevent that test and do the default action.
Prevents this build error on UML + i386:
../drivers/net/ethernet/dec/tulip/winbond-840.c: In function ‘init_registers’:
../drivers/net/ethernet/dec/tulip/winbond-840.c:882:19: error: ‘struct cpuinfo_um’ has no member named ‘x86’
if (boot_cpu_data.x86 <= 4) {
Fixes: 68f5d3f3b654 ("um: add PCI over virtio emulation driver")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: linux-um@lists.infradead.org
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Link: https://lore.kernel.org/r/20211014050606.7288-1-rdunlap@infradead.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 523994ba3ad1b7b55abe4a72e156897b5e2db825 ]
On a UML build, the igc_ptp driver uses CONFIG_X86_TSC for timestamp
conversion. The function that is used is not available on UML builds,
so have the function use the default system_counterval_t timestamp
instead for UML builds.
Prevents this build error on UML:
../drivers/net/ethernet/intel/igc/igc_ptp.c: In function ‘igc_device_tstamp_to_system’:
../drivers/net/ethernet/intel/igc/igc_ptp.c:777:9: error: implicit declaration of function ‘convert_art_ns_to_tsc’ [-Werror=implicit-function-declaration]
return convert_art_ns_to_tsc(tstamp);
../drivers/net/ethernet/intel/igc/igc_ptp.c:777:9: error: incompatible types when returning type ‘int’ but ‘struct system_counterval_t’ was expected
return convert_art_ns_to_tsc(tstamp);
Fixes: 68f5d3f3b654 ("um: add PCI over virtio emulation driver")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: linux-um@lists.infradead.org
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Cc: Jesse Brandeburg <jesse.brandeburg@intel.com>
Cc: Tony Nguyen <anthony.l.nguyen@intel.com>
Cc: intel-wired-lan@lists.osuosl.org
Link: https://lore.kernel.org/r/20211014050516.6846-1-rdunlap@infradead.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit cd2621d07d517473611b170c69beb6524c677740 ]
On i386, when builtin (not a loadable module), the fealnx driver
inspects boot_cpu_data to see what CPU family it is running on, and
then acts on that data. The "family" struct member (x86) does not exist
when running on UML, so prevent that test and do the default action.
Prevents this build error on UML + i386:
../drivers/net/ethernet/fealnx.c: In function ‘netdev_open’:
../drivers/net/ethernet/fealnx.c:861:19: error: ‘struct cpuinfo_um’ has no member named ‘x86’
Fixes: 68f5d3f3b654 ("um: add PCI over virtio emulation driver")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: linux-um@lists.infradead.org
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Link: https://lore.kernel.org/r/20211014050500.5620-1-rdunlap@infradead.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 1b4d1c9bab091ac6e20a3ff80c30c5cefe192bf4 ]
The rx_buf_alloc_fail counter wasn't getting updated.
Fixes: 433e274b8f7b0 ("gve: Add stats for gve.")
Signed-off-by: Catherine Sullivan <csully@google.com>
Signed-off-by: Jeroen de Borst <jeroendb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 87a7f321bb6a45e54b7d6c90d032ee5636a6ad97 ]
Don't always reset the driver on a TX timeout. Attempt to
recover by kicking the queue in case an IRQ was missed.
Fixes: 9e5f7d26a4c08 ("gve: Add workqueue and reset support")
Signed-off-by: John Fraker <jfraker@google.com>
Signed-off-by: David Awogbemila <awogbemila@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 1e0083bd0777e4a418a6710d9ee04b979cdbe5cc ]
The use of dma_unmap_addr()/dma_unmap_len() in the driver causes
multiple warnings when these macros are defined as empty, e.g.
in an ARCH=i386 allmodconfig build:
drivers/net/ethernet/google/gve/gve_tx_dqo.c: In function 'gve_tx_add_skb_no_copy_dqo':
drivers/net/ethernet/google/gve/gve_tx_dqo.c:494:40: error: unused variable 'buf' [-Werror=unused-variable]
494 | struct gve_tx_dma_buf *buf =
This is not how the NEED_DMA_MAP_STATE macros are meant to work,
as they rely on never using local variables or a temporary structure
like gve_tx_dma_buf.
Remote the gve_tx_dma_buf definition and open-code the contents
in all places to avoid the warning. This causes some rather long
lines but otherwise ends up making the driver slightly smaller.
Fixes: a57e5de476be ("gve: DQO: Add TX path")
Link: https://lore.kernel.org/netdev/20210723231957.1113800-1-bcf@google.com/
Link: https://lore.kernel.org/netdev/20210721151100.2042139-1-arnd@kernel.org/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 64ea2d0e7263b67d8efc93fa1baace041ed36d1e ]
The change of devlink_alloc() to accept device makes sure that device
is fully initialized and device_register() does nothing except allowing
users to use that devlink instance.
Such change ensures that no user input will be usable till that point and
it eliminates the need to worry about internal locking as long as devlink_register
is called last since all accesses to the devlink are during initialization.
This change fixes the following lockdep warning.
======================================================
WARNING: possible circular locking dependency detected
5.14.0-rc2+ #27 Not tainted
------------------------------------------------------
devlink/265 is trying to acquire lock:
ffff8880133c2bc0 (&dev->intf_state_mutex){+.+.}-{3:3}, at: mlx5_unload_one+0x1e/0xa0 [mlx5_core]
but task is already holding lock:
ffffffff8362b468 (devlink_mutex){+.+.}-{3:3}, at: devlink_nl_pre_doit+0x2b/0x8d0
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #1 (devlink_mutex){+.+.}-{3:3}:
__mutex_lock+0x149/0x1310
devlink_register+0xe7/0x280
mlx5_devlink_register+0x118/0x480 [mlx5_core]
mlx5_init_one+0x34b/0x440 [mlx5_core]
probe_one+0x480/0x6e0 [mlx5_core]
pci_device_probe+0x2a0/0x4a0
really_probe+0x1cb/0xba0
__driver_probe_device+0x18f/0x470
driver_probe_device+0x49/0x120
__driver_attach+0x1ce/0x400
bus_for_each_dev+0x11e/0x1a0
bus_add_driver+0x309/0x570
driver_register+0x20f/0x390
0xffffffffa04a0062
do_one_initcall+0xd5/0x400
do_init_module+0x1c8/0x760
load_module+0x7d9d/0xa4b0
__do_sys_finit_module+0x118/0x1a0
do_syscall_64+0x3d/0x90
entry_SYSCALL_64_after_hwframe+0x44/0xae
-> #0 (&dev->intf_state_mutex){+.+.}-{3:3}:
__lock_acquire+0x2999/0x5a40
lock_acquire+0x1a9/0x4a0
__mutex_lock+0x149/0x1310
mlx5_unload_one+0x1e/0xa0 [mlx5_core]
mlx5_devlink_reload_down+0x185/0x2b0 [mlx5_core]
devlink_reload+0x1f2/0x640
devlink_nl_cmd_reload+0x6c3/0x10d0
genl_family_rcv_msg_doit+0x1e9/0x2f0
genl_rcv_msg+0x27f/0x4a0
netlink_rcv_skb+0x11e/0x340
genl_rcv+0x24/0x40
netlink_unicast+0x433/0x700
netlink_sendmsg+0x6fb/0xbe0
sock_sendmsg+0xb0/0xe0
__sys_sendto+0x192/0x240
__x64_sys_sendto+0xdc/0x1b0
do_syscall_64+0x3d/0x90
entry_SYSCALL_64_after_hwframe+0x44/0xae
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(devlink_mutex);
lock(&dev->intf_state_mutex);
lock(devlink_mutex);
lock(&dev->intf_state_mutex);
*** DEADLOCK ***
3 locks held by devlink/265:
#0: ffffffff836371d0 (cb_lock){++++}-{3:3}, at: genl_rcv+0x15/0x40
#1: ffffffff83637288 (genl_mutex){+.+.}-{3:3}, at: genl_rcv_msg+0x31a/0x4a0
#2: ffffffff8362b468 (devlink_mutex){+.+.}-{3:3}, at: devlink_nl_pre_doit+0x2b/0x8d0
stack backtrace:
CPU: 0 PID: 265 Comm: devlink Not tainted 5.14.0-rc2+ #27
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
Call Trace:
dump_stack_lvl+0x45/0x59
check_noncircular+0x268/0x310
? print_circular_bug+0x460/0x460
? __kernel_text_address+0xe/0x30
? alloc_chain_hlocks+0x1e6/0x5a0
__lock_acquire+0x2999/0x5a40
? lockdep_hardirqs_on_prepare+0x3e0/0x3e0
? add_lock_to_list.constprop.0+0x6c/0x530
lock_acquire+0x1a9/0x4a0
? mlx5_unload_one+0x1e/0xa0 [mlx5_core]
? lock_release+0x6c0/0x6c0
? lockdep_hardirqs_on_prepare+0x3e0/0x3e0
? lock_is_held_type+0x98/0x110
__mutex_lock+0x149/0x1310
? mlx5_unload_one+0x1e/0xa0 [mlx5_core]
? lock_is_held_type+0x98/0x110
? mlx5_unload_one+0x1e/0xa0 [mlx5_core]
? find_held_lock+0x2d/0x110
? mutex_lock_io_nested+0x1160/0x1160
? mlx5_lag_is_active+0x72/0x90 [mlx5_core]
? lock_downgrade+0x6d0/0x6d0
? do_raw_spin_lock+0x12e/0x270
? rwlock_bug.part.0+0x90/0x90
? mlx5_unload_one+0x1e/0xa0 [mlx5_core]
mlx5_unload_one+0x1e/0xa0 [mlx5_core]
mlx5_devlink_reload_down+0x185/0x2b0 [mlx5_core]
? netlink_broadcast_filtered+0x308/0xac0
? mlx5_devlink_info_get+0x1f0/0x1f0 [mlx5_core]
? __build_skb_around+0x110/0x2b0
? __alloc_skb+0x113/0x2b0
devlink_reload+0x1f2/0x640
? devlink_unregister+0x1e0/0x1e0
? security_capable+0x51/0x90
devlink_nl_cmd_reload+0x6c3/0x10d0
? devlink_nl_cmd_get_doit+0x1e0/0x1e0
? devlink_nl_pre_doit+0x72/0x8d0
genl_family_rcv_msg_doit+0x1e9/0x2f0
? __lock_acquire+0x15e2/0x5a40
? genl_family_rcv_msg_attrs_parse.constprop.0+0x240/0x240
? mutex_lock_io_nested+0x1160/0x1160
? security_capable+0x51/0x90
genl_rcv_msg+0x27f/0x4a0
? genl_get_cmd+0x3c0/0x3c0
? lock_acquire+0x1a9/0x4a0
? devlink_nl_cmd_get_doit+0x1e0/0x1e0
? lock_release+0x6c0/0x6c0
netlink_rcv_skb+0x11e/0x340
? genl_get_cmd+0x3c0/0x3c0
? netlink_ack+0x930/0x930
genl_rcv+0x24/0x40
netlink_unicast+0x433/0x700
? netlink_attachskb+0x750/0x750
? __alloc_skb+0x113/0x2b0
netlink_sendmsg+0x6fb/0xbe0
? netlink_unicast+0x700/0x700
? netlink_unicast+0x700/0x700
sock_sendmsg+0xb0/0xe0
__sys_sendto+0x192/0x240
? __x64_sys_getpeername+0xb0/0xb0
? do_sys_openat2+0x10a/0x370
? down_write_nested+0x150/0x150
? do_user_addr_fault+0x215/0xd50
? __x64_sys_openat+0x11f/0x1d0
? __x64_sys_open+0x1a0/0x1a0
__x64_sys_sendto+0xdc/0x1b0
? syscall_enter_from_user_mode+0x1d/0x50
do_syscall_64+0x3d/0x90
entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x7f50b50b6b3a
Code: d8 64 89 02 48 c7 c0 ff ff ff ff eb b8 0f 1f 00 f3 0f 1e fa 41 89 ca 64 8b 04 25 18 00 00 00 85 c0 75 15 b8 2c 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 76 c3 0f 1f 44 00 00 55 48 83 ec 30 44 89 4c
RSP: 002b:00007fff6c0d3f38 EFLAGS: 00000246 ORIG_RAX: 000000000000002c
RAX: ffffffffffffffda RBX: 0000000000000005 RCX: 00007f50b50b6b3a
RDX: 0000000000000038 RSI: 000055763ac08440 RDI: 0000000000000003
RBP: 000055763ac08410 R08: 00007f50b5192200 R09: 000000000000000c
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
R13: 0000000000000000 R14: 000055763ac08410 R15: 000055763ac08440
mlx5_core 0000:00:09.0: firmware version: 4.8.9999
mlx5_core 0000:00:09.0: 0.000 Gb/s available PCIe bandwidth (8.0 GT/s PCIe x255 link)
mlx5_core 0000:00:09.0 eth1: Link up
Fixes: a6f3b62386a0 ("net/mlx5: Move devlink registration before interfaces load")
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit e6a54d6f221301347aaf9d83bb1f23129325c1c5 ]
devlink is a software interface that doesn't depend on any hardware
capabilities. The failure in SW means memory issues, wrong parameters,
programmer error e.t.c.
Like any other such interface in the kernel, the returned status of
devlink APIs should be checked and propagated further and not ignored.
Fixes: 755f982bb1ff ("qed/qede: make devlink survive recovery")
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit e624c70e1131e145bd0510b8a700b5e2d112e377 ]
devlink is a software interface that doesn't depend on any hardware
capabilities. The failure in SW means memory issues, wrong parameters,
programmer error e.t.c.
Like any other such interface in the kernel, the returned status of
devlink APIs should be checked and propagated further and not ignored.
Fixes: 4ab0c6a8ffd7 ("bnxt_en: add support to enable VF-representors")
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Reviewed-by: Edwin Peer <edwin.peer@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit e9310aed8e6a5003abb2aa6b9229d2fb9ceb9e85 ]
The devlink parameters were published in two steps despite being static
and known in advance.
First step was to use devlink_params_publish() which iterated over all
known up to that point parameters and sent notification messages.
In second step, the call was devlink_param_publish() that looped over
same parameters list and sent notification for new parameters.
In order to simplify the API, move devlink_params_publish() to be called
when all parameters were already added and save the need to iterate over
parameters list again.
As a side effect, this change fixes the error unwind flow in which
parameters were not marked as unpublished.
Fixes: 82e6c96f04e1 ("net/mlx5: Register to devlink ingress VLAN filter trap")
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit 2ae0aa4758b0f4a247d45cb3bf01548a7f396751 ]
Keeping devlink port inside VSI data structure causes some issues.
Since VF VSI is released during reset that means that we have to
unregister devlink port and register it again every time reset is
triggered. With the new changes in devlink API it
might cause deadlock issues. After calling
devlink_port_register/devlink_port_unregister devlink API is going to
lock rtnl_mutex. It's an issue when VF reset is triggered in netlink
operation context (like setting VF MAC address or VLAN),
because rtnl_lock is already taken by netlink. Another call of
rtnl_lock from devlink API results in dead-lock.
By moving devlink port to PF/VF we avoid creating/destroying it
during reset. Since this patch, devlink ports are created during
ice_probe, destroyed during ice_remove for PF and created during
ice_repr_add, destroyed during ice_repr_rem for VF.
Signed-off-by: Wojciech Drewek <wojciech.drewek@intel.com>
Tested-by: Sandeep Penigalapati <sandeep.penigalapati@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
[ Upstream commit ffd2f89ad05cd620d822112a07b0c5669fa9e333 ]
Whenever the interface is brought up/down then set_rx_mode
function is called by the stack which enables promisc/allmulti
MCAM entries. But there are cases when driver brings
interface down and then up such as while changing number
of channels. In these cases promisc/allmulti MCAM entries
are left disabled as set_rx_mode callback is not called.
This patch enables these MCAM entries in all such cases.
Signed-off-by: Rakesh Babu <rsaladi2@marvell.com>
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
|
|
commit 041c61488236a5a84789083e3d9f0a51139b6edf upstream.
Everything except the first 32 bits was lost when the pause flags were
added. This makes the 50000baseCR2 mode flag (bit 34) not appear.
I have tested this with a 10G card (SFN5122F-R7) by modifying it to
return a non-legacy link mode (10000baseCR).
Signed-off-by: Erik Ekman <erik@kryo.se>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This reverts commit 3bda2e5df476417b6d08967e2d84234a59d57b1c.
According to discussion with Andrew as follow:
https://lore.kernel.org/netdev/09eda9fe-196b-006b-6f01-f54e75715961@huawei.com/
HNS3 driver needs to separate pause autoneg from general autoneg, so revert
this incorrect patch.
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Link: https://lore.kernel.org/r/20211028140624.53149-1-huangguangbin2@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
This patch fixes possible null pointer dereference in files
"rvu_debugfs.c" and "rvu_nix.c"
Fixes: 8756828a8148 ("octeontx2-af: Add NPA aura and pool contexts to debugfs")
Fixes: 9a946def264d ("octeontx2-af: Modify nix_vtag_cfg mailbox to support TX VTAG entries")
Signed-off-by: Rakesh Babu Saladi <rsaladi2@marvell.com>
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Currently, we are using a fixed buffer size of length 2048 to display
rsrc_alloc output. As a result a maximum of 2048 characters of
rsrc_alloc output is displayed, which may lead sometimes to display only
partial output. This patch fixes this dependency on max limit of buffer
size and displays all PF VF entries.
Each column of the debugfs entry "rsrc_alloc" uses a fixed width of 12
characters to print the list of LFs of each block for a PF/VF. If the
length of list of LFs of a block exceeds this fixed width then the list
gets truncated and displays only a part of the list. This patch fixes
this by using the maximum possible length of list of LFs among all
blocks of all PFs and VFs entries as the width size.
Fixes: f7884097141b ("octeontx2-af: Formatting debugfs entry rsrc_alloc.")
Fixes: 23205e6d06d4 ("octeontx2-af: Dump current resource provisioning status")
Signed-off-by: Rakesh Babu <rsaladi2@marvell.com>
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Signed-off-by: Sunil Kovvuri Goutham <Sunil.Goutham@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
While displaying ingress policers information in
debugfs check whether ingress policers exist in
the hardware or not because some platforms(CN9XXX)
do not have this feature.
Fixes: e7d8971763f3 ("octeontx2-af: cn10k: Debugfs support for bandwidth")
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: Rakesh Babu <rsaladi2@marvell.com>
Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
The driver allocates skb during ndo_open with GFP_ATOMIC which has high chance of failure when there are multiple instances.
GFP_KERNEL is enough while open and use GFP_ATOMIC only from interrupt context.
Fixes: 23f0703c125b ("lan743x: Add main source files for new lan743x driver")
Signed-off-by: Yuiko Oshino <yuiko.oshino@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
