summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet
AgeCommit message (Collapse)AuthorFilesLines
2021-09-19net: mscc: ocelot: remove buggy and useless write to ANA_PFC_PFC_CFGColin Foster1-4/+0
A useless write to ANA_PFC_PFC_CFG was left in while refactoring ocelot to phylink. Since priority flow control is disabled, writing the speed has no effect. Further, it was using ethtool.h SPEED_ instead of OCELOT_SPEED_ macros, which are incorrectly offset for GENMASK. Lastly, for priority flow control to properly function, some scenarios would rely on the rate adaptation from the PCS while the MAC speed would be fixed. So it isn't used, and even if it was, neither "speed" nor "mac_speed" are necessarily the correct values to be used. Fixes: e6e12df625f2 ("net: mscc: ocelot: convert to phylink") Signed-off-by: Colin Foster <colin.foster@in-advantage.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-19igc: fix build errors for PTPRandy Dunlap1-0/+1
When IGC=y and PTP_1588_CLOCK=m, the ptp_*() interface family is not available to the igc driver. Make this driver depend on PTP_1588_CLOCK_OPTIONAL so that it will build without errors. Various igc commits have used ptp_*() functions without checking that PTP_1588_CLOCK is enabled. Fix all of these here. Fixes these build errors: ld: drivers/net/ethernet/intel/igc/igc_main.o: in function `igc_msix_other': igc_main.c:(.text+0x6494): undefined reference to `ptp_clock_event' ld: igc_main.c:(.text+0x64ef): undefined reference to `ptp_clock_event' ld: igc_main.c:(.text+0x6559): undefined reference to `ptp_clock_event' ld: drivers/net/ethernet/intel/igc/igc_ethtool.o: in function `igc_ethtool_get_ts_info': igc_ethtool.c:(.text+0xc7a): undefined reference to `ptp_clock_index' ld: drivers/net/ethernet/intel/igc/igc_ptp.o: in function `igc_ptp_feature_enable_i225': igc_ptp.c:(.text+0x330): undefined reference to `ptp_find_pin' ld: igc_ptp.c:(.text+0x36f): undefined reference to `ptp_find_pin' ld: drivers/net/ethernet/intel/igc/igc_ptp.o: in function `igc_ptp_init': igc_ptp.c:(.text+0x11cd): undefined reference to `ptp_clock_register' ld: drivers/net/ethernet/intel/igc/igc_ptp.o: in function `igc_ptp_stop': igc_ptp.c:(.text+0x12dd): undefined reference to `ptp_clock_unregister' ld: drivers/platform/x86/dell/dell-wmi-privacy.o: in function `dell_privacy_wmi_probe': Fixes: 64433e5bf40ab ("igc: Enable internal i225 PPS") Fixes: 60dbede0c4f3d ("igc: Add support for ethtool GET_TS_INFO command") Fixes: 87938851b6efb ("igc: enable auxiliary PHC functions for the i225") Fixes: 5f2958052c582 ("igc: Add basic skeleton for PTP") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Ederson de Souza <ederson.desouza@intel.com> Cc: Tony Nguyen <anthony.l.nguyen@intel.com> Cc: Vinicius Costa Gomes <vinicius.gomes@intel.com> Cc: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Cc: Jesse Brandeburg <jesse.brandeburg@intel.com> Cc: intel-wired-lan@lists.osuosl.org Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-19enetc: Fix uninitialized struct dim_sample field usageClaudiu Manoil1-1/+1
The only struct dim_sample member that does not get initialized by dim_update_sample() is comp_ctr. (There is special API to initialize comp_ctr: dim_update_sample_with_comps(), and it is currently used only for RDMA.) comp_ctr is used to compute curr_stats->cmps and curr_stats->cpe_ratio (see dim_calc_stats()) which in turn are consumed by the rdma_dim_*() API. Therefore, functionally, the net_dim*() API consumers are not affected. Nevertheless, fix the computation of statistics based on an uninitialized variable, even if the mentioned statistics are not used at the moment. Fixes: ae0e6a5d1627 ("enetc: Add adaptive interrupt coalescing") Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-19enetc: Fix illegal access when reading affinity_hintClaudiu Manoil1-4/+1
irq_set_affinity_hit() stores a reference to the cpumask_t parameter in the irq descriptor, and that reference can be accessed later from irq_affinity_hint_proc_show(). Since the cpu_mask parameter passed to irq_set_affinity_hit() has only temporary storage (it's on the stack memory), later accesses to it are illegal. Thus reads from the corresponding procfs affinity_hint file can result in paging request oops. The issue is fixed by the get_cpu_mask() helper, which provides a permanent storage for the cpumask_t parameter. Fixes: d4fd0404c1c9 ("enetc: Introduce basic PF and VF ENETC ethernet drivers") Signed-off-by: Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-17net: update NXP copyright textVladimir Oltean5-5/+5
NXP Legal insists that the following are not fine: - Saying "NXP Semiconductors" instead of "NXP", since the company's registered name is "NXP" - Putting a "(c)" sign in the copyright string - Putting a comma in the copyright string The only accepted copyright string format is "Copyright <year-range> NXP". This patch changes the copyright headers in the networking files that were sent by me, or derived from code sent by me. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-16Merge tag 'net-5.15-rc2' of ↵Linus Torvalds35-129/+291
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Including fixes from bpf. Current release - regressions: - vhost_net: fix OoB on sendmsg() failure - mlx5: bridge, fix uninitialized variable usage - bnxt_en: fix error recovery regression Current release - new code bugs: - bpf, mm: fix lockdep warning triggered by stack_map_get_build_id_offset() Previous releases - regressions: - r6040: restore MDIO clock frequency after MAC reset - tcp: fix tp->undo_retrans accounting in tcp_sacktag_one() - dsa: flush switchdev workqueue before tearing down CPU/DSA ports Previous releases - always broken: - ptp: dp83640: don't define PAGE0, avoid compiler warning - igc: fix tunnel segmentation offloads - phylink: update SFP selected interface on advertising changes - stmmac: fix system hang caused by eee_ctrl_timer during suspend/resume - mlx5e: fix mutual exclusion between CQE compression and HW TS Misc: - bpf, cgroups: fix cgroup v2 fallback on v1/v2 mixed mode - sfc: fallback for lack of xdp tx queues - hns3: add option to turn off page pool feature" * tag 'net-5.15-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (67 commits) mlxbf_gige: clear valid_polarity upon open igc: fix tunnel offloading net/{mlx5|nfp|bnxt}: Remove unnecessary RTNL lock assert net: wan: wanxl: define CROSS_COMPILE_M68K selftests: nci: replace unsigned int with int net: dsa: flush switchdev workqueue before tearing down CPU/DSA ports Revert "net: phy: Uniform PHY driver access" net: dsa: destroy the phylink instance on any error in dsa_slave_phy_setup ptp: dp83640: don't define PAGE0 bnx2x: Fix enabling network interfaces without VFs Revert "Revert "ipv4: fix memory leaks in ip_cmsg_send() callers"" tcp: fix tp->undo_retrans accounting in tcp_sacktag_one() net-caif: avoid user-triggerable WARN_ON(1) bpf, selftests: Add test case for mixed cgroup v1/v2 bpf, selftests: Add cgroup v1 net_cls classid helpers bpf, cgroups: Fix cgroup v2 fallback on v1/v2 mixed mode bpf: Add oversize check before call kvcalloc() net: hns3: fix the timing issue of VF clearing interrupt sources net: hns3: fix the exception when query imp info net: hns3: disable mac in flr process ...
2021-09-163com 3c515: make it compile on 64-bit architecturesLinus Torvalds1-1/+1
This driver isn't enabled most places because of the ISA config dependency, but alpha still has it. And I think the 'Jensen' actually did have an ISA slot. However, it doesn't build cleanly, because the "Vortex bus master" code just casts the skb->data pointer to 'int': outl((int) (skb->data), ioaddr + Wn7_MasterAddr); which is all kinds of broken. Even on a good old traditional PC/AT it would be broken because the high bits will be random kernel address bits, but presumably the hardware ignores those bits. I mean, it's ISA. We're talking 16MB dma limits. The "good old days". Make the build happy with this kind of craziness by using the proper isa_virt_to_bus() handling that the full bus master code uses anyway (the Vortex bus mastering is a limited special case). Who knows, this might even work. Reported-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-16mlxbf_gige: clear valid_polarity upon openDavid Thompson1-0/+7
The network interface managed by the mlxbf_gige driver can get into a problem state where traffic does not flow. In this state, the interface will be up and enabled, but will stop processing received packets. This problem state will happen if three specific conditions occur: 1) driver has received more than (N * RxRingSize) packets but less than (N+1 * RxRingSize) packets, where N is an odd number Note: the command "ethtool -g <interface>" will display the current receive ring size, which currently defaults to 128 2) the driver's interface was disabled via "ifconfig oob_net0 down" during the window described in #1. 3) the driver's interface is re-enabled via "ifconfig oob_net0 up" This patch ensures that the driver's "valid_polarity" field is cleared during the open() method so that it always matches the receive polarity used by hardware. Without this fix, the driver needs to be unloaded and reloaded to correct this problem state. Fixes: f92e1869d74e ("Add Mellanox BlueField Gigabit Ethernet driver") Reviewed-by: Asmaa Mnebhi <asmaa@nvidia.com> Signed-off-by: David Thompson <davthompson@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-16igc: fix tunnel offloadingPaolo Abeni1-1/+3
Checking tunnel offloading, it turns out that offloading doesn't work as expected. The following script allows to reproduce the issue. Call it as `testscript DEVICE LOCALIP REMOTEIP NETMASK' === SNIP === if [ $# -ne 4 ] then echo "Usage $0 DEVICE LOCALIP REMOTEIP NETMASK" exit 1 fi DEVICE="$1" LOCAL_ADDRESS="$2" REMOTE_ADDRESS="$3" NWMASK="$4" echo "Driver: $(ethtool -i ${DEVICE} | awk '/^driver:/{print $2}') " ethtool -k "${DEVICE}" | grep tx-udp echo echo "Set up NIC and tunnel..." ip addr add "${LOCAL_ADDRESS}/${NWMASK}" dev "${DEVICE}" ip link set "${DEVICE}" up sleep 2 ip link add vxlan1 type vxlan id 42 \ remote "${REMOTE_ADDRESS}" \ local "${LOCAL_ADDRESS}" \ dstport 0 \ dev "${DEVICE}" ip addr add fc00::1/64 dev vxlan1 ip link set vxlan1 up sleep 2 rm -f vxlan.pcap echo "Running tcpdump and iperf3..." ( nohup tcpdump -i any -w vxlan.pcap >/dev/null 2>&1 ) & sleep 2 iperf3 -c fc00::2 >/dev/null pkill tcpdump echo echo -n "Max. Paket Size: " tcpdump -r vxlan.pcap -nnle 2>/dev/null \ | grep "${LOCAL_ADDRESS}.*> ${REMOTE_ADDRESS}.*OTV" \ | awk '{print $8}' | awk -F ':' '{print $1}' \ | sort -n | tail -1 echo ip link del vxlan1 ip addr del ${LOCAL_ADDRESS}/${NWMASK} dev "${DEVICE}" === SNAP === The expected outcome is Max. Paket Size: 64904 This is what you see on igb, the code igc has been taken from. However, on igc the output is Max. Paket Size: 1516 so the GSO aggregate packets are segmented by the kernel before calling igc_xmit_frame. Inside the subsequent call to igc_tso, the check for skb_is_gso(skb) fails and the function returns prematurely. It turns out that this occurs because the feature flags aren't set entirely correctly in igc_probe. In contrast to the original code from igb_probe, igc_probe neglects to set the flags required to allow tunnel offloading. Setting the same flags as igb fixes the issue on igc. Fixes: 34428dff3679 ("igc: Add GSO partial support") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Tested-by: Corinna Vinschen <vinschen@redhat.com> Acked-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Nechama Kraus <nechamax.kraus@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-16net/{mlx5|nfp|bnxt}: Remove unnecessary RTNL lock assertEli Cohen3-9/+0
Remove the assert from the callback priv lookup function since it does not require RTNL lock and is already protected by flow_indr_block_lock. This will avoid warnings from being emitted to dmesg if the driver registers its callback after an ingress qdisc was created for a netdevice. The warnings started after the following patch was merged: commit 74fc4f828769 ("net: Fix offloading indirect devices dependency on qdisc order creation") Signed-off-by: Eli Cohen <elic@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-15net: i825xx: Use absolute_pointer for memcpy from fixed memory locationGuenter Roeck1-1/+1
gcc 11.x reports the following compiler warning/error. drivers/net/ethernet/i825xx/82596.c: In function 'i82596_probe': arch/m68k/include/asm/string.h:72:25: error: '__builtin_memcpy' reading 6 bytes from a region of size 0 [-Werror=stringop-overread] Use absolute_pointer() to work around the problem. Cc: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-15bnx2x: Fix enabling network interfaces without VFsAdrian Bunk1-1/+1
This function is called to enable SR-IOV when available, not enabling interfaces without VFs was a regression. Fixes: 65161c35554f ("bnx2x: Fix missing error code in bnx2x_iov_init_one()") Signed-off-by: Adrian Bunk <bunk@kernel.org> Reported-by: YunQiang Su <wzssyqa@gmail.com> Tested-by: YunQiang Su <wzssyqa@gmail.com> Cc: stable@vger.kernel.org Acked-by: Shai Malin <smalin@marvell.com> Link: https://lore.kernel.org/r/20210912190523.27991-1-bunk@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-09-13net: hns3: fix the timing issue of VF clearing interrupt sourcesJiaran Zhang1-3/+3
Currently, the VF does not clear the interrupt source immediately after receiving the interrupt. As a result, if the second interrupt task is triggered when processing the first interrupt task, clearing the interrupt source before exiting will clear the interrupt sources of the two tasks at the same time. As a result, no interrupt is triggered for the second task. The VF detects the missed message only when the next interrupt is generated. Clearing it immediately after executing check_evt_cause ensures that: 1. Even if two interrupt tasks are triggered at the same time, they can be processed. 2. If the second task is triggered during the processing of the first task and the interrupt source is not cleared, the interrupt is reported after vector0 is enabled. Fixes: b90fcc5bd904 ("net: hns3: add reset handling for VF when doing Core/Global/IMP reset") Signed-off-by: Jiaran Zhang <zhangjiaran@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-13net: hns3: fix the exception when query imp infoJiaran Zhang1-0/+4
When the command for querying imp info is issued to the firmware, if the firmware does not support the command, the returned value of bd num is 0. Add protection mechanism before alloc memory to prevent apply for 0-length memory. Fixes: 0b198b0d80ea ("net: hns3: refactor dump m7 info of debugfs") Signed-off-by: Jiaran Zhang <zhangjiaran@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-13net: hns3: disable mac in flr processYufeng Mo1-2/+3
The firmware will not disable mac in flr process. Therefore, the driver needs to proactively disable mac during flr, which is the same as the function reset. Fixes: 35d93a30040c ("net: hns3: adjust the process of PF reset") Signed-off-by: Yufeng Mo <moyufeng@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-13net: hns3: change affinity_mask to numa node rangeYufeng Mo1-6/+8
Currently, affinity_mask is set to a single cpu. As a result, irqbalance becomes invalid in SUBSET or EXACT mode. To solve this problem, change affinity_mask to numa node range. In this way, irqbalance can be performed on the cpu of the numa node. Fixes: 0812545487ec ("net: hns3: add interrupt affinity support for misc interrupt") Signed-off-by: Yufeng Mo <moyufeng@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-13net: hns3: pad the short tunnel frame before sending to hardwareYufeng Mo1-2/+6
The hardware cannot handle short tunnel frames below 65 bytes, and will cause vlan tag missing problem. So pads packet size to 65 bytes for tunnel frames to fix this bug. Fixes: 3db084d28dc0("net: hns3: Fix for vxlan tx checksum bug") Signed-off-by: Yufeng Mo <moyufeng@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-13net: hns3: add option to turn off page pool featureYunsheng Lin1-1/+5
When page pool is added to the hns3 driver, it is always enabled unconditionally, which means spilt page handling in the hns3 driver is dead code. As there is a requirement to test the performance between spilt page handling in driver and page pool, so add a module param to support disabling the page pool. When the page pool is proved to perform better in most case, the spilt page handling in driver can be removed. Fixes: 93188e9642c3 ("net: hns3: support skb's frag page recycling based on page pool") Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-13bnxt_en: Clean up completion ring page arrays completelyMichael Chan1-0/+8
We recently changed the completion ring page arrays to be dynamically allocated to better support the expanded range of ring depths. The cleanup path for this was not quite complete. It might cause the shutdown path to crash if we need to abort before the completion ring arrays have been allocated and initialized. Fix it by initializing the ring_mem->pg_arr to NULL after freeing the completion ring page array. Add a check in bnxt_free_ring() to skip referencing the rmem->pg_arr if it is NULL. Fixes: 03c7448790b8 ("bnxt_en: Don't use static arrays for completion ring pages") Reviewed-by: Andy Gospodarek <gospo@broadcom.com> Reviewed-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-13bnxt_en: make bnxt_free_skbs() safe to call after bnxt_free_mem()Edwin Peer1-0/+13
The call to bnxt_free_mem(..., false) in the bnxt_half_open_nic() error path will deallocate ring descriptor memory via bnxt_free_?x_rings(), but because irq_re_init is false, the ring info itself is not freed. To simplify error paths, deallocation functions have generally been written to be safe when called on unallocated memory. It should always be safe to call dev_close(), which calls bnxt_free_skbs() a second time, even in this semi- allocated ring state. Calling bnxt_free_skbs() a second time with the rings already freed will cause NULL pointer dereference. Fix it by checking the rings are valid before proceeding in bnxt_free_tx_skbs() and bnxt_free_one_rx_ring_skbs(). Fixes: 975bc99a4a39 ("bnxt_en: Refactor bnxt_free_rx_skbs().") Signed-off-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-13bnxt_en: Fix error recovery regressionMichael Chan1-4/+8
The recent patch has introduced a regression by not reading the reset count in the ERROR_RECOVERY async event handler. We may have just gone through a reset and the reset count has just incremented. If we don't update the reset count in the ERROR_RECOVERY event handler, the health check timer will see that the reset count has changed and will initiate an unintended reset. Restore the unconditional update of the reset count in bnxt_async_event_process() if error recovery watchdog is enabled. Also, update the reset count at the end of the reset sequence to make it even more robust. Fixes: 1b2b91831983 ("bnxt_en: Fix possible unintended driver initiated error recovery") Reviewed-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-12net: mana: Prefer struct_size over open coded arithmeticLen Baker1-3/+1
As noted in the "Deprecated Interfaces, Language Features, Attributes, and Conventions" documentation [1], size calculations (especially multiplication) should not be performed in memory allocator (or similar) function arguments due to the risk of them overflowing. This could lead to values wrapping around and a smaller allocation being made than the caller was expecting. Using those allocations could lead to linear overflows of heap memory and other misbehaviors. So, use the struct_size() helper to do the arithmetic instead of the argument "size + count * size" in the kzalloc() function. [1] https://www.kernel.org/doc/html/v5.14/process/deprecated.html#open-coded-arithmetic-in-allocator-arguments Signed-off-by: Len Baker <len.baker@gmx.com> Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-11net: stmmac: allow CSR clock of 300MHzJesper Nilsson1-1/+1
The Synopsys Ethernet IP uses the CSR clock as a base clock for MDC. The divisor used is set in the MAC_MDIO_Address register field CR (Clock Rate) The divisor is there to change the CSR clock into a clock that falls below the IEEE 802.3 specified max frequency of 2.5MHz. If the CSR clock is 300MHz, the code falls back to using the reset value in the MAC_MDIO_Address register, as described in the comment above this code. However, 300MHz is actually an allowed value and the proper divider can be estimated quite easily (it's just 1Hz difference!) A CSR frequency of 300MHz with the maximum clock rate value of 0x5 (STMMAC_CSR_250_300M, a divisor of 124) gives somewhere around ~2.42MHz which is below the IEEE 802.3 specified maximum. For the ARTPEC-8 SoC, the CSR clock is this problematic 300MHz, and unfortunately, the reset-value of the MAC_MDIO_Address CR field is 0x0. This leads to a clock rate of zero and a divisor of 42, and gives an MDC frequency of ~7.14MHz. Allow CSR clock of 300MHz by making the comparison inclusive. Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-10qlcnic: Remove redundant initialization of variable retColin Ian King1-1/+1
The variable ret is being initialized with a value that is never read, it is being updated later on. The assignment is redundant and can be removed. Addresses-Coverity: ("Unused value") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-10qed: Handle management FW errorShai Malin1-1/+5
Handle MFW (management FW) error response in order to avoid a crash during recovery flows. Changes from v1: - Add "Fixes tag". Fixes: tag 5e7ba042fd05 ("qed: Fix reading stale configuration information") Signed-off-by: Ariel Elior <aelior@marvell.com> Signed-off-by: Shai Malin <smalin@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-10r6040: Restore MDIO clock frequency after MAC resetFlorian Fainelli1-1/+8
A number of users have reported that they were not able to get the PHY to successfully link up, especially after commit c36757eb9dee ("net: phy: consider AN_RESTART status when reading link status") where we stopped reading just BMSR, but we also read BMCR to determine the link status. Andrius at NetBSD did a wonderful job at debugging the problem and found out that the MDIO bus clock frequency would be incorrectly set back to its default value which would prevent the MDIO bus controller from reading PHY registers properly. Back when we only read BMSR, if we read all 1s, we could falsely indicate a link status, though in general there is a cable plugged in, so this went unnoticed. After a second read of BMCR was added, a wrong read will lead to the inability to determine a link UP condition which is when it started to be visibly broken, even if it was long before that. The fix consists in restoring the value of the MD_CSR register that was set prior to the MAC reset. Link: http://gnats.netbsd.org/cgi-bin/query-pr-single.pl?number=53494 Fixes: 90f750a81a29 ("r6040: consolidate MAC reset to its own function") Reported-by: Andrius V <vezhlys@gmail.com> Reported-by: Darek Strugacz <darek.strugacz@op.pl> Tested-by: Darek Strugacz <darek.strugacz@op.pl> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-10ice: Correctly deal with PFs that do not support RDMADave Ertman2-0/+8
There are two cases where the current PF does not support RDMA functionality. The first is if the NVM loaded on the device is set to not support RDMA (common_caps.rdma is false). The second is if the kernel bonding driver has included the current PF in an active link aggregate. When the driver has determined that this PF does not support RDMA, then auxiliary devices should not be created on the auxiliary bus. Without a device on the auxiliary bus, even if the irdma driver is present, there will be no RDMA activity attempted on this PF. Currently, in the reset flow, an attempt to create auxiliary devices is performed without regard to the ability of the PF. There needs to be a check in ice_aux_plug_dev (as the central point that creates auxiliary devices) to see if the PF is in a state to support the functionality. When disabling and re-enabling RDMA due to the inclusion/removal of the PF in a link aggregate, we also need to set/clear the bit which controls auxiliary device creation so that a reset recovery in a link aggregate situation doesn't try to create auxiliary devices when it shouldn't. Fixes: f9f5301e7e2d ("ice: Register auxiliary device to provide RDMA") Reported-by: Yongxin Liu <yongxin.liu@windriver.com> Signed-off-by: Dave Ertman <david.m.ertman@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-09net: ni65: Avoid typecast of pointer to u32Guenter Roeck1-1/+1
Building alpha:allmodconfig results in the following error. drivers/net/ethernet/amd/ni65.c: In function 'ni65_stop_start': drivers/net/ethernet/amd/ni65.c:751:37: error: cast from pointer to integer of different size buffer[i] = (u32) isa_bus_to_virt(tmdp->u.buffer); 'buffer[]' is declared as unsigned long, so replace the typecast to u32 with a typecast to unsigned long to fix the problem. Cc: Arnd Bergmann <arnd@kernel.org> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-09sfc: last resort fallback for lack of xdp tx queuesÍñigo Huguet3-40/+58
Previous patch addressed the situation of having some free resources for xdp tx but not enough for one tx queue per CPU. This patch address the worst case of not having resources at all for xdp tx. Instead of using queues dedicated to xdp, normal queues used by network stack are shared for both cases, using __netif_tx_lock for synchronization. Also queue stop/restart must be considered in the xdp path to avoid freezing the queue. This is not the ideal situation we might want to be, and a performance penalty is expected both for normal and xdp traffic, but at least XDP will work in all possible situations (with a warning in the logs), improving a bit the pain of not knowing in what situations we can use it and in what situations we cannot. Signed-off-by: Íñigo Huguet <ihuguet@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-09sfc: fallback for lack of xdp tx queuesÍñigo Huguet3-19/+64
If there are not enough resources to allocate one TX queue per core for XDP TX it was completely disabled. This patch implements a fallback solution for sharing the available queues using __netif_tx_lock for synchronization. In the normal case that there is one TX queue per CPU, no locking is done, as it was before. With this fallback solution, XDP TX will work in much more cases that were failing, specially in machines with many CPUs. It's hard for XDP users to know what features are supported across different NICs and configurations, so they will benefit on having wider support. Signed-off-by: Íñigo Huguet <ihuguet@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-09net: stmmac: platform: fix build warning when with !CONFIG_PM_SLEEPJoakim Zhang1-2/+2
Use __maybe_unused for noirq_suspend()/noirq_resume() hooks to avoid build warning with !CONFIG_PM_SLEEP: >> drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c:796:12: error: 'stmmac_pltfr_noirq_resume' defined but not used [-Werror=unused-function] 796 | static int stmmac_pltfr_noirq_resume(struct device *dev) | ^~~~~~~~~~~~~~~~~~~~~~~~~ >> drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c:775:12: error: 'stmmac_pltfr_noirq_suspend' defined but not used [-Werror=unused-function] 775 | static int stmmac_pltfr_noirq_suspend(struct device *dev) | ^~~~~~~~~~~~~~~~~~~~~~~~~~ cc1: all warnings being treated as errors Fixes: 276aae377206 ("net: stmmac: fix system hang caused by eee_ctrl_timer during suspend/resume") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-09net: macb: fix use after free on rmmodTong Zhang1-1/+1
plat_dev->dev->platform_data is released by platform_device_unregister(), use of pclk and hclk is a use-after-free. Since device unregister won't need a clk device we adjust the function call sequence to fix this issue. [ 31.261225] BUG: KASAN: use-after-free in macb_remove+0x77/0xc6 [macb_pci] [ 31.275563] Freed by task 306: [ 30.276782] platform_device_release+0x25/0x80 Suggested-by: Nicolas Ferre <Nicolas.Ferre@microchip.com> Signed-off-by: Tong Zhang <ztong0001@gmail.com> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-09ibmvnic: check failover_pending in login responseSukadev Bhattiprolu1-0/+8
If a failover occurs before a login response is received, the login response buffer maybe undefined. Check that there was no failover before accessing the login response buffer. Fixes: 032c5e82847a ("Driver for IBM System i/p VNIC protocol") Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-08net: stmmac: fix system hang caused by eee_ctrl_timer during suspend/resumeJoakim Zhang2-14/+44
commit 5f58591323bf ("net: stmmac: delete the eee_ctrl_timer after napi disabled"), this patch tries to fix system hang caused by eee_ctrl_timer, unfortunately, it only can resolve it for system reboot stress test. System hang also can be reproduced easily during system suspend/resume stess test when mount NFS on i.MX8MP EVK board. In stmmac driver, eee feature is combined to phylink framework. When do system suspend, phylink_stop() would queue delayed work, it invokes stmmac_mac_link_down(), where to deactivate eee_ctrl_timer synchronizly. In above commit, try to fix issue by deactivating eee_ctrl_timer obviously, but it is not enough. Looking into eee_ctrl_timer expire callback stmmac_eee_ctrl_timer(), it could enable hareware eee mode again. What is unexpected is that LPI interrupt (MAC_Interrupt_Enable.LPIEN bit) is always asserted. This interrupt has chance to be issued when LPI state entry/exit from the MAC, and at that time, clock could have been already disabled. The result is that system hang when driver try to touch register from interrupt handler. The reason why above commit can fix system hang issue in stmmac_release() is that, deactivate eee_ctrl_timer not just after napi disabled, further after irq freed. In conclusion, hardware would generate LPI interrupt when clock has been disabled during suspend or resume, since hardware is in eee mode and LPI interrupt enabled. Interrupts from MAC, MTL and DMA level are enabled and never been disabled when system suspend, so postpone clocks management from suspend stage to noirq suspend stage should be more safe. Fixes: 5f58591323bf ("net: stmmac: delete the eee_ctrl_timer after napi disabled") Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-08ne2000: fix unused function warningArnd Bergmann1-15/+7
Geert noticed a warning on MIPS TX49xx, Atari and presuambly other platforms when the driver is built-in but NETDEV_LEGACY_INIT is disabled: drivers/net/ethernet/8390/ne.c:909:20: warning: ‘ne_add_devices’ defined but not used [-Wunused-function] Merge the two module init functions into a single one with an IS_ENABLED() check to replace the incorrect #ifdef. Fixes: 4228c3942821 ("make legacy ISA probe optional") Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org> Tested-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-08Merge tag 'mlx5-fixes-2021-09-07' of ↵David S. Miller9-22/+26
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== mlx5 fixes 2021-09-07 This series introduces some fixes to mlx5 driver. Please pull and let me know if there is any problem. Included here, a patch which solves a build warning reported on linux-kernel mailing list [1]: Fix commit ("net/mlx5: Bridge, fix uninitialized variable usage") I hope this series can make it to rc1. [1] https://www.spinics.net/lists/netdev/msg765481.html ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-08ibmvnic: check failover_pending in login responseSukadev Bhattiprolu1-0/+8
If a failover occurs before a login response is received, the login response buffer maybe undefined. Check that there was no failover before accessing the login response buffer. Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-08Merge tag 'pci-v5.15-changes' of ↵Linus Torvalds11-401/+141
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: "Enumeration: - Convert controller drivers to generic_handle_domain_irq() (Marc Zyngier) - Simplify VPD (Vital Product Data) access and search (Heiner Kallweit) - Update bnx2, bnx2x, bnxt, cxgb4, cxlflash, sfc, tg3 drivers to use simplified VPD interfaces (Heiner Kallweit) - Run Max Payload Size quirks before configuring MPS; work around ASMedia ASM1062 SATA MPS issue (Marek Behún) Resource management: - Refactor pci_ioremap_bar() and pci_ioremap_wc_bar() (Krzysztof Wilczyński) - Optimize pci_resource_len() to reduce kernel size (Zhen Lei) PCI device hotplug: - Fix a double unmap in ibmphp (Vishal Aslot) PCIe port driver: - Enable Bandwidth Notification only if port supports it (Stuart Hayes) Sysfs/proc/syscalls: - Add schedule point in proc_bus_pci_read() (Krzysztof Wilczyński) - Return ~0 data on pciconfig_read() CAP_SYS_ADMIN failure (Krzysztof Wilczyński) - Return "int" from pciconfig_read() syscall (Krzysztof Wilczyński) Virtualization: - Extend "pci=noats" to also turn on Translation Blocking to protect against some DMA attacks (Alex Williamson) - Add sysfs mechanism to control the type of reset used between device assignments to VMs (Amey Narkhede) - Add support for ACPI _RST reset method (Shanker Donthineni) - Add ACS quirks for Cavium multi-function devices (George Cherian) - Add ACS quirks for NXP LX2xx0 and LX2xx2 platforms (Wasim Khan) - Allow HiSilicon AMBA devices that appear as fake PCI devices to use PASID and SVA (Zhangfei Gao) Endpoint framework: - Add support for SR-IOV Endpoint devices (Kishon Vijay Abraham I) - Zero-initialize endpoint test tool parameters so we don't use random parameters (Shunyong Yang) APM X-Gene PCIe controller driver: - Remove redundant dev_err() call in xgene_msi_probe() (ErKun Yang) Broadcom iProc PCIe controller driver: - Don't fail devm_pci_alloc_host_bridge() on missing 'ranges' because it's optional on BCMA devices (Rob Herring) - Fix BCMA probe resource handling (Rob Herring) Cadence PCIe driver: - Work around J7200 Link training electrical issue by increasing delays in LTSSM (Nadeem Athani) Intel IXP4xx PCI controller driver: - Depend on ARCH_IXP4XX to avoid useless config questions (Geert Uytterhoeven) Intel Keembay PCIe controller driver: - Add Intel Keem Bay PCIe controller (Srikanth Thokala) Marvell Aardvark PCIe controller driver: - Work around config space completion handling issues (Evan Wang) - Increase timeout for config access completions (Pali Rohár) - Emulate CRS Software Visibility bit (Pali Rohár) - Configure resources from DT 'ranges' property to fix I/O space access (Pali Rohár) - Serialize INTx mask/unmask (Pali Rohár) MediaTek PCIe controller driver: - Add MT7629 support in DT (Chuanjia Liu) - Fix an MSI issue (Chuanjia Liu) - Get syscon regmap ("mediatek,generic-pciecfg"), IRQ number ("pci_irq"), PCI domain ("linux,pci-domain") from DT properties if present (Chuanjia Liu) Microsoft Hyper-V host bridge driver: - Add ARM64 support (Boqun Feng) - Support "Create Interrupt v3" message (Sunil Muthuswamy) NVIDIA Tegra PCIe controller driver: - Use seq_puts(), move err_msg from stack to static, fix OF node leak (Christophe JAILLET) NVIDIA Tegra194 PCIe driver: - Disable suspend when in Endpoint mode (Om Prakash Singh) - Fix MSI-X address programming error (Om Prakash Singh) - Disable interrupts during suspend to avoid spurious AER link down (Om Prakash Singh) Renesas R-Car PCIe controller driver: - Work around hardware issue that prevents Link L1->L0 transition (Marek Vasut) - Fix runtime PM refcount leak (Dinghao Liu) Rockchip DesignWare PCIe controller driver: - Add Rockchip RK356X host controller driver (Simon Xue) TI J721E PCIe driver: - Add support for J7200 and AM64 (Kishon Vijay Abraham I) Toshiba Visconti PCIe controller driver: - Add Toshiba Visconti PCIe host controller driver (Nobuhiro Iwamatsu) Xilinx NWL PCIe controller driver: - Enable PCIe reference clock via CCF (Hyun Kwon) Miscellaneous: - Convert sta2x11 from 'pci_' to 'dma_' API (Christophe JAILLET) - Fix pci_dev_str_match_path() alloc while atomic bug (used for kernel parameters that specify devices) (Dan Carpenter) - Remove pointless Precision Time Management warning when PTM is present but not enabled (Jakub Kicinski) - Remove surplus "break" statements (Krzysztof Wilczyński)" * tag 'pci-v5.15-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (132 commits) PCI: ibmphp: Fix double unmap of io_mem x86/PCI: sta2x11: switch from 'pci_' to 'dma_' API PCI/VPD: Use unaligned access helpers PCI/VPD: Clean up public VPD defines and inline functions cxgb4: Use pci_vpd_find_id_string() to find VPD ID string PCI/VPD: Add pci_vpd_find_id_string() PCI/VPD: Include post-processing in pci_vpd_find_tag() PCI/VPD: Stop exporting pci_vpd_find_info_keyword() PCI/VPD: Stop exporting pci_vpd_find_tag() PCI: Set dma-can-stall for HiSilicon chips PCI: rockchip-dwc: Add Rockchip RK356X host controller driver PCI: dwc: Remove surplus break statement after return PCI: artpec6: Remove local code block from switch statement PCI: artpec6: Remove surplus break statement after return MAINTAINERS: Add entries for Toshiba Visconti PCIe controller PCI: visconti: Add Toshiba Visconti PCIe host controller driver PCI/portdrv: Enable Bandwidth Notification only if port supports it PCI: Allow PASID on fake PCIe devices without TLP prefixes PCI: mediatek: Use PCI domain to handle ports detection PCI: mediatek: Add new method to get irq number ...
2021-09-08net/mlx5e: Fix condition when retrieving PTP-rqnAya Levin1-1/+1
When activating the PTP-RQ, redirect the RQT from drop-RQ to PTP-RQ. Use mlx5e_channels_get_ptp_rqn to retrieve the rqn. This helper returns a boolean (not status), hence caller should consider return value 0 as a fail. Change the caller interpretation of the return value. Fixes: 43ec0f41fa73 ("net/mlx5e: Hide all implementation details of mlx5e_rx_res") Signed-off-by: Aya Levin <ayal@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-09-08net/mlx5e: Fix mutual exclusion between CQE compression and HW TSAya Levin3-8/+9
Some profiles of the driver don't support a dedicated PTP-RQ, hence can't support HW TS and CQE compression simultaneously. When HW TS is enabled the COE compression is disabled, and should be restored when the HW TS is turned off. Add rx_filter as an input to modifying CQE compression to enforce this restriction. Fixes: 256f79d13c1d ("net/mlx5e: Fix HW TS with CQE compression according to profile") Signed-off-by: Aya Levin <ayal@nvidia.com> Reviewed-by: Moshe Shemesh <moshe@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-09-08net/mlx5: Fix potential sleeping in atomic contextMaor Gottlieb1-3/+2
Fixes the below flow of sleeping in atomic context by releasing the RCU lock before calling to free_match_list. build_match_list() <- disables preempt -> free_match_list() -> tree_put_node() -> down_write_ref_node() <- take write lock Fixes: 693c6883bbc4 ("net/mlx5: Add hash table for flow groups in flow table") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Maor Gottlieb <maorg@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-09-08net/mlx5: FWTrace, cancel work on alloc pd error flowSaeed Mahameed1-1/+2
Handle error flow on mlx5_core_alloc_pd() failure, read_fw_strings_work must be canceled. Fixes: c71ad41ccb0c ("net/mlx5: FW tracer, events handling") Reported-by: Pavel Machek (CIP) <pavel@denx.de> Suggested-by: Pavel Machek (CIP) <pavel@denx.de> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Reviewed-by: Aya Levin <ayal@nvidia.com>
2021-09-08net/mlx5: Lag, don't update lag if lag isn't supportedMark Bloch1-2/+8
In NICs that don't support LAG, the LAG control structure won't be allocated. If it wasn't allocated it means LAG doesn't exists and can be skipped. Fixes: cac1eb2cf2e3 ("net/mlx5: Lag, properly lock eswitch if needed") Signed-off-by: Mark Bloch <mbloch@nvidia.com> Reviewed-by: Maor Gottlieb <maorg@nvidia.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-09-08net/mlx5: Fix rdma aux device on devlink reloadParav Pandit1-5/+2
RDMA auxdev parameter registration was skipped for eswitch manager PCI PF. Due to this when devlink parameter is read, it reads as false in below code flow. $ devlink dev reload pci/0000:06:00.0 devlink_reload() mlx5_load_one() mlx5_attach_device() is_ib_enabled() devlink_param_driverinit_value_get() Due to this, is_ib_enabled() returns false for the RDMA auxiliary device. This results into a skipping RDMA auxiliary device creation on reload. There is no need to check for eswitch manager capability to support RDMA auxiliary device. Hence, fix it by skipping eswitch manager capability. Fixes: 87158cedf00e ("net/mlx5: Support enable_rdma devlink dev param") Signed-off-by: Parav Pandit <parav@nvidia.com> Reviewed-by: Shay Drory <shayd@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-09-08net/mlx5: Bridge, fix uninitialized variable usageVlad Buslov1-2/+2
In some conditions variable 'err' is not assigned with value in mlx5_esw_bridge_port_obj_attr_set() and mlx5_esw_bridge_port_changeupper() functions after recent changes to support LAG. Initialize the variable with zero value in both cases. Reported-by: Colin King <colin.king@canonical.com> Reported-by: Tim Gardner <tim.gardner@canonical.com> Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org> CC: linux-kernel@vger.kernel.org Fixes: ff9b7521468b ("net/mlx5: Bridge, support LAG") Signed-off-by: Vlad Buslov <vladbu@nvidia.com>
2021-09-08Merge tag 'net-5.15-rc1' of ↵Linus Torvalds31-159/+233
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes and stragglers from Jakub Kicinski: "Networking stragglers and fixes, including changes from netfilter, wireless and can. Current release - regressions: - qrtr: revert check in qrtr_endpoint_post(), fixes audio and wifi - ip_gre: validate csum_start only on pull - bnxt_en: fix 64-bit doorbell operation on 32-bit kernels - ionic: fix double use of queue-lock, fix a sleeping in atomic - can: c_can: fix null-ptr-deref on ioctl() - cs89x0: disable compile testing on powerpc Current release - new code bugs: - bridge: mcast: fix vlan port router deadlock, consistently disable BH Previous releases - regressions: - dsa: tag_rtl4_a: fix egress tags, only port 0 was working - mptcp: fix possible divide by zero - netfilter: nft_ct: protect nft_ct_pcpu_template_refcnt with mutex - netfilter: socket: icmp6: fix use-after-scope - stmmac: fix MAC not working when system resume back with WoL active Previous releases - always broken: - ip/ip6_gre: use the same logic as SIT interfaces when computing v6LL address - seg6: set fc_nlinfo in nh_create_ipv4, nh_create_ipv6 - mptcp: only send extra TCP acks in eligible socket states - dsa: lantiq_gswip: fix maximum frame length - stmmac: fix overall budget calculation for rxtx_napi - bnxt_en: fix firmware version reporting via devlink - renesas: sh_eth: add missing barrier to fix freeing wrong tx descriptor Stragglers: - netfilter: conntrack: switch to siphash - netfilter: refuse insertion if chain has grown too large - ncsi: add get MAC address command to get Intel i210 MAC address" * tag 'net-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (76 commits) ieee802154: Remove redundant initialization of variable ret net: stmmac: fix MAC not working when system resume back with WoL active net: phylink: add suspend/resume support net: renesas: sh_eth: Fix freeing wrong tx descriptor bonding: 3ad: pass parameter bond_params by reference cxgb3: fix oops on module removal can: c_can: fix null-ptr-deref on ioctl() can: rcar_canfd: add __maybe_unused annotation to silence warning net: wwan: iosm: Unify IO accessors used in the driver net: wwan: iosm: Replace io.*64_lo_hi() with regular accessors net: qcom/emac: Replace strlcpy with strscpy ip6_gre: Revert "ip6_gre: add validation for csum_start" net: hns3: make hclgevf_cmd_caps_bit_map0 and hclge_cmd_caps_bit_map0 static selftests/bpf: Test XDP bonding nest and unwind bonding: Fix negative jump label count on nested bonding MAINTAINERS: add VM SOCKETS (AF_VSOCK) entry stmmac: dwmac-loongson:Fix missing return value iwlwifi: fix printk format warnings in uefi.c net: create netdev->dev_addr assignment helpers bnxt_en: Fix possible unintended driver initiated error recovery ...
2021-09-07net: stmmac: fix MAC not working when system resume back with WoL activeJoakim Zhang1-18/+18
We can reproduce this issue with below steps: 1) enable WoL on the host 2) host system suspended 3) remote client send out wakeup packets We can see that host system resume back, but can't work, such as ping failed. After a bit digging, this issue is introduced by the commit 46f69ded988d ("net: stmmac: Use resolved link config in mac_link_up()"), which use the finalised link parameters in mac_link_up() rather than the parameters in mac_config(). There are two scenarios for MAC suspend/resume in STMMAC driver: 1) MAC suspend with WoL inactive, stmmac_suspend() call phylink_mac_change() to notify phylink machine that a change in MAC state, then .mac_link_down callback would be invoked. Further, it will call phylink_stop() to stop the phylink instance. When MAC resume back, firstly phylink_start() is called to start the phylink instance, then call phylink_mac_change() which will finally trigger phylink machine to invoke .mac_config and .mac_link_up callback. All is fine since configuration in these two callbacks will be initialized, that means MAC can restore the state. 2) MAC suspend with WoL active, phylink_mac_change() will put link down, but there is no phylink_stop() to stop the phylink instance, so it will link up again, that means .mac_config and .mac_link_up would be invoked before system suspended. After system resume back, it will do DMA initialization and SW reset which let MAC lost the hardware setting (i.e MAC_Configuration register(offset 0x0) is reset). Since link is up before system suspended, so .mac_link_up would not be invoked after system resume back, lead to there is no chance to initialize the configuration in .mac_link_up callback, as a result, MAC can't work any longer. After discussed with Russell King [1], we confirm that phylink framework have not take WoL into consideration yet. This patch calls phylink_suspend()/phylink_resume() functions which is newly introduced by Russell King to fix this issue. [1] https://lore.kernel.org/netdev/20210901090228.11308-1-qiangqing.zhang@nxp.com/ Fixes: 46f69ded988d ("net: stmmac: Use resolved link config in mac_link_up()") Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-07net: renesas: sh_eth: Fix freeing wrong tx descriptorYoshihiro Shimoda1-0/+1
The cur_tx counter must be incremented after TACT bit of txdesc->status was set. However, a CPU is possible to reorder instructions and/or memory accesses between cur_tx and txdesc->status. And then, if TX interrupt happened at such a timing, the sh_eth_tx_free() may free the descriptor wrongly. So, add wmb() before cur_tx++. Otherwise NETDEV WATCHDOG timeout is possible to happen. Fixes: 86a74ff21a7a ("net: sh_eth: add support for Renesas SuperH Ethernet") Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-07cxgb3: fix oops on module removalHeiner Kallweit1-0/+3
When removing the driver module w/o bringing an interface up before the error below occurs. Reason seems to be that cancel_work_sync() is called in t3_sge_stop() for a queue that hasn't been initialized yet. [10085.941785] ------------[ cut here ]------------ [10085.941799] WARNING: CPU: 1 PID: 5850 at kernel/workqueue.c:3074 __flush_work+0x3ff/0x480 [10085.941819] Modules linked in: vfat snd_hda_codec_hdmi fat snd_hda_codec_realtek snd_hda_codec_generic ledtrig_audio led_class ee1004 iTCO_ wdt intel_tcc_cooling x86_pkg_temp_thermal coretemp aesni_intel crypto_simd cryptd snd_hda_intel snd_intel_dspcfg snd_hda_codec snd_hda_core r 8169 snd_pcm realtek mdio_devres snd_timer snd i2c_i801 i2c_smbus libphy i915 i2c_algo_bit cxgb3(-) intel_gtt ttm mdio drm_kms_helper mei_me s yscopyarea sysfillrect sysimgblt mei fb_sys_fops acpi_pad sch_fq_codel crypto_user drm efivarfs ext4 mbcache jbd2 crc32c_intel [10085.941944] CPU: 1 PID: 5850 Comm: rmmod Not tainted 5.14.0-rc7-next-20210826+ #6 [10085.941974] Hardware name: System manufacturer System Product Name/PRIME H310I-PLUS, BIOS 2603 10/21/2019 [10085.941992] RIP: 0010:__flush_work+0x3ff/0x480 [10085.942003] Code: c0 74 6b 65 ff 0d d1 bd 78 75 e8 bc 2f 06 00 48 c7 c6 68 b1 88 8a 48 c7 c7 e0 5f b4 8b 45 31 ff e8 e6 66 04 00 e9 4b fe ff ff <0f> 0b 45 31 ff e9 41 fe ff ff e8 72 c1 79 00 85 c0 74 87 80 3d 22 [10085.942036] RSP: 0018:ffffa1744383fc08 EFLAGS: 00010246 [10085.942048] RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000923 [10085.942062] RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffff91c901710a88 [10085.942076] RBP: ffffa1744383fce8 R08: 0000000000000001 R09: 0000000000000001 [10085.942090] R10: 00000000000000c2 R11: 0000000000000000 R12: ffff91c901710a88 [10085.942104] R13: 0000000000000000 R14: ffff91c909a96100 R15: 0000000000000001 [10085.942118] FS: 00007fe417837740(0000) GS:ffff91c969d00000(0000) knlGS:0000000000000000 [10085.942134] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [10085.942146] CR2: 000055a8d567ecd8 CR3: 0000000121690003 CR4: 00000000003706e0 [10085.942160] Call Trace: [10085.942166] ? __lock_acquire+0x3af/0x22e0 [10085.942177] ? cancel_work_sync+0xb/0x10 [10085.942187] __cancel_work_timer+0x128/0x1b0 [10085.942197] ? __pm_runtime_resume+0x5b/0x90 [10085.942208] cancel_work_sync+0xb/0x10 [10085.942217] t3_sge_stop+0x2f/0x50 [cxgb3] [10085.942234] remove_one+0x26/0x190 [cxgb3] [10085.942248] pci_device_remove+0x39/0xa0 [10085.942258] __device_release_driver+0x15e/0x240 [10085.942269] driver_detach+0xd9/0x120 [10085.942278] bus_remove_driver+0x53/0xd0 [10085.942288] driver_unregister+0x2c/0x50 [10085.942298] pci_unregister_driver+0x31/0x90 [10085.942307] cxgb3_cleanup_module+0x10/0x18c [cxgb3] [10085.942324] __do_sys_delete_module+0x191/0x250 [10085.942336] ? syscall_enter_from_user_mode+0x21/0x60 [10085.942347] ? trace_hardirqs_on+0x2a/0xe0 [10085.942357] __x64_sys_delete_module+0x13/0x20 [10085.942368] do_syscall_64+0x40/0x90 [10085.942377] entry_SYSCALL_64_after_hwframe+0x44/0xae [10085.942389] RIP: 0033:0x7fe41796323b Fixes: 5e0b8928927f ("net:cxgb3: replace tasklets with works") Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-06net: qcom/emac: Replace strlcpy with strscpyJason Wang1-1/+1
The strlcpy should not be used because it doesn't limit the source length. As linus says, it's a completely useless function if you can't implicitly trust the source string - but that is almost always why people think they should use it! All in all the BSD function will lead some potential bugs. But the strscpy doesn't require reading memory from the src string beyond the specified "count" bytes, and since the return value is easier to error-check than strlcpy()'s. In addition, the implementation is robust to the string changing out from underneath it, unlike the current strlcpy() implementation. Thus, We prefer using strscpy instead of strlcpy. Signed-off-by: Jason Wang <wangborong@cdjrlc.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-25 18:42:16 +0300