summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet
AgeCommit message (Collapse)AuthorFilesLines
2014-02-25gianfar: Fix device reset races (oops) for TxClaudiu Manoil3-84/+76
The device reset procedure, stop_gfar()/startup_gfar(), has concurrency issues. "Kernel access of bad area" oopses show up during Tx timeout device reset or other reset cases (like changing MTU) that happen while the interface still has traffic. The oopses happen in start_xmit and clean_tx_ring when accessing tx_queue-> tx_skbuff which is NULL. The race comes from de-allocating the tx_skbuff while transmission and napi processing are still active. Though the Tx queues get temoprarily stopped when Tx timeout occurs, they get re-enabled as a result of Tx congestion handling inside the napi context (see clean_tx_ring()). Not disabling the napi during reset is also a bug, because clean_tx_ring() will try to access tx_skbuff while it is being de-alloc'ed and re-alloc'ed. To fix this, stop_gfar() needs to disable napi processing after stopping the Tx queues. However, in order to prevent clean_tx_ring() to re-enable the Tx queue before the napi gets disabled, the device state DOWN has been introduced. It prevents the Tx congestion management from re-enabling the de-congested Tx queue while the device is brought down. An additional locking state, RESETTING, has been introduced to prevent simultaneous resets or to prevent configuring the device while it is resetting. The bogus 'rxlock's (for each Rx queue) have been removed since their purpose is not justified, as they don't prevent nor are suited to prevent device reset/reconfig races (such as this one). Signed-off-by: Claudiu Manoil <claudiu.manoil@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-25gianfar: Don't free/request irqs on device resetClaudiu Manoil1-32/+45
Resetting the device (stop_gfar()/startup_gfar()) should be fast and to the point, in order to timely recover from an error condition (like Tx timeout) or during device reconfig. The irq free/ request routines are just redundant here, and they should be part of the device close/ open routines instead. Signed-off-by: Claudiu Manoil <claudiu.manoil@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-25gianfar: Fix on-the-fly vlan and mtu updatesClaudiu Manoil3-127/+51
The RCTRL and TCTRL registers should not be changed on-the-fly, while the controller is running, otherwise unexpected behaviour occurs. But that's exactly what gfar_vlan_mode() does, updating the VLAN acceleration bits inside RCTRL/TCTRL. The attempt to lock these operations doesn't help, but only adds to the confusion. There's also a dependency for Rx FCB insertion (activating /de-activating the TOE offload block on Rx) which might change the required rx buffer size. This makes matters worse as gfar_vlan_mode() ends up calling gfar_change_mtu(), though the MTU size remains the same. Note that there are other situations that may affect the required rx buffer size, like changing RXCSUM or rx hw timestamping, but errorneously the rx buffer size is not recomputed/ updated in the process. To fix this, do the vlan updates properly inside the MAC reset and reconfiguration procedure, which takes care of the rx buffer size dependecy and the rx TOE block (PRSDEP) activation/deactivation as well (in the correct order). As a consequence, MTU/ rx buff size updates are done now by the same MAC reset and reconfig procedure, so that out of context updates to MAXFRM, MRBLR, and MACCFG inside change_mtu() are no longer needed. The rx buffer size dependecy to Rx FCB is now handled for the other cases too (RXCSUM and rx hw timestamping). Signed-off-by: Claudiu Manoil <claudiu.manoil@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-25gianfar: Implement MAC reset and reconfig procedureClaudiu Manoil1-82/+90
The main MAC config registers like: RCTRL/TCTRL, MRBLR, MAXFRM, RXIC/TXIC, most fields of MACCFG1/2, should not be changed on-the-fly, but at least after stopping the DMA and disabling the Rx/Tx blocks and, for increased reliability, after a MAC soft reset. Impelement a complete MAC soft reset and reconfig procedure following the latest HW advisories - gfar_mac_reset() - to replace gfar_mac_init() and (the confusing) init_registers() functions. Factor out separate config functions for RCTRL and TCTRL, insure programming order of the relevant config regs after MAC soft reset. Split gfar_hw_init() into gfar_mac_reset() and the remaining global regs that don't need to be reconfigured after MAC soft reset (FIFOCFG, ATTRELI, HW counters a.s.o). As gfar_hw_init() now makes all the register writes @probe() time, based on all the device flags and config options, it must be moved further down, just before register_netdev(), as the last config step when the config values are comitted to HW. Also, move netif_carrier_off() after register_netdev(), because it has no effect if called before. Signed-off-by: Claudiu Manoil <claudiu.manoil@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-25bcmgenet: Deleted unnecessary select_queue method.David S. Miller1-7/+0
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-25net: bcmgenet: Use devm_ioremap_resource()Fabio Estevam1-4/+3
According to Documentation/driver-model/devres.txt, devm_request_and_ioremap() is deprecated, so use devm_ioremap_resource() instead. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-25cgxb4: Stop using ethtool SPEED_* constantsBen Hutchings2-14/+14
ethtool speed values are just numbers of megabits and there is no need to add SPEED_40000. To be consistent, use integer constants directly for all speeds. Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-25qlcnic: Update version to 5.3.56Shahed Shaikh1-2/+2
Signed-off-by: Shahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-25qlcnic: Enhance semaphore lock access failure error messageHarish Patil1-7/+15
Signed-off-by: Harish Patil <harish.patil@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-25qlcnic: Allow vlan0 trafficRajesh Borundia1-1/+5
o Adapter allows vlan0 traffic in case of SR-IOV after setting QLC_SRIOV_ALLOW_VLAN0 bit even though we do not add vlan0 filters. Signed-off-by: Rajesh Borundia <rajesh.borundia@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-25qlcnic: Enhance driver message in failed state.Sucheta Chakraborty1-2/+2
Signed-off-by: Sucheta Chakraborty <sucheta.chakraborty@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-25qlcnic: Updates to QLogic application/driver interface for virtual NIC ↵Jitendra Kalsaria1-65/+37
configuration Qlogic application interface in the driver which has larger than 8 vNIC configuration support has been updated to handle the following cases: o Only 8 or lower total vNICs were enabled within the vNIC 0-7 range o vNICs were enabled in the vNIC 0-15 range such that enabled vNICs were not contiguous and only 8 or lower number of total VNICs were enabled o Disconnect in the vNIC mapping between application and driver when the enabled VNICs were dis contiguous Signed-off-by: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-25qlcnic: Re-factor firmware minidump template header handlingShahed Shaikh7-66/+287
Treat firmware minidump template headers for 82xx and 83xx/84xx adapters separately, as it may change for 82xx and 83xx/84xx adapter type independently. Signed-off-by: Shahed Shaikh <shahed.shaikh@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-25net/mlx4: Fix limiting number of IRQ's instead of RSS queuesIdo Shamay2-3/+5
This fix a performance bug introduced by commit 90b1ebe "mlx4: set maximal number of default RSS queues", which limits the numbers of IRQs opened by core module. The limit should be on the number of queues in the indirection table - rx_rings, and not on the number of IRQ's. Also, limiting on mlx4_core initialization instead of in mlx4_en, prevented using "ethtool -L" to utilize all the CPU's, when performance mode is prefered, since limiting this number to 8 reduces overall packet rate by 15%-50% in multiple TCP streams applications. For example, after running ethtool -L <ethx> rx 16 Packet rate Before the fix 897799 After the fix 1142070 Results were obtained using netperf: S=200 ; ( for i in $(seq 1 $S) ; do ( \ netperf -H 11.7.13.55 -t TCP_RR -l 30 &) ; \ wait ; done | grep "1 1" | awk '{SUM+=$6} END {print SUM}' ) CC: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Ido Shamay <idos@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-25net/mlx4: Set number of RX rings in a utility functionIdo Shamay3-14/+25
mlx4_en_add() is too long. Moving set number of RX rings to a utiltity function to improve readability and modulization of the code. Signed-off-by: Ido Shamay <idos@mellanox.com> Signed-off-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-21i40e and i40evf: Bump driver versionsCatherine Sullivan2-2/+2
Update the driver versions. Change-ID: I3fe23024d17da0e614ce126edb365bb2c428d482 Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-21i40e: Change MSIX to MSI-XCatherine Sullivan2-5/+7
Fix inconsistent use of MSIX and MSI-X in messages. Change-ID: Iae9ffb42819677c34544719044ed77632e06147d Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-21i40e: tighten up ring enable/disable flowMitch Williams1-17/+15
Change the do/while to a for loop, so we don't hit the delay each time, even when the register is ready for action. Don't bother to set or clear the QENA_STAT bit as it is read-only. Change-ID: Ie464718804dd79f6d726f291caa9b0c872b49978 Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-21i40e: remove unnecessary delayMitch Williams1-1/+0
Ain't nothing gonna break my stride, nobody's gonna slow me down, oh no. I got to keep on moving. This was originally put in for debugging just-in-case purposes and never removed. Change-ID: Ic12c2e179c3923f54e6ba0a9e4ab05d25c3bab29 Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com> Signed-off-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-21i40evf: remove errant spaceMitch A Williams1-1/+1
Remove a bogus space. Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Sibai Li <sibai.li@intel.com> Signed-off-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-21i40evf: update version and copyright dateMitch Williams1-2/+2
A bunch of changes merit a new version number, and since these were made in the new year, update the copyright date. Change-ID: Ic3f282bf0c20679b9fb06860211afa7c78055bc2 Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Sibai Li <sibai.li@intel.com> Signed-off-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-21i40evf: store ring size in ring structsMitch Williams3-10/+8
Keep the descriptor ring size in the actual ring structs instead of in the adapter struct. This enables us to use common tx and rx code with the i40e PF driver. Also update copyrights. Change-ID: I2861e599b2b4c76441c062ea14400f4750f54d0e Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Sibai Li <sibai.li@intel.com> Signed-off-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-21i40evf: don't guess device nameMitch Williams1-2/+0
We don't need to set an interface name here; the net core will do that, and then it will get renamed by udev anyway. Change-ID: I839a17837d19bedd1f490bff32ac5b85b4bfd97f Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Sibai Li <sibai.li@intel.com> Signed-off-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-21i40evf: remove bogus commentMitch Williams1-1/+0
This comment is simply not true. Change-ID: If006b02b60984601a24257a951ae873dff568008 Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Sibai Li <sibai.li@intel.com> Signed-off-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-21i40evf: fix up strings in init taskMitch Williams1-20/+16
Make sure errors are reported at the correct log level, quit printing the function name every time, and make the messages more consistent in format. v2: Removed unnecessary periods and redundant OOM message. Change-ID: I50e443467519ad3850def131d84626c50612c611 Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Sibai Li <sibai.li@intel.com> Signed-off-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-21i40evf: get rid of pci_using_dacMitch Williams1-7/+3
PCI DAC doesn't really mean much on a virtualized PCI Express part, so get rid of that check and just always set the HIGHDMA flag in the net device. Change-ID: I2040272be0e7934323f470c2bc73fbdd4f93e2b6 Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Sibai Li <sibai.li@intel.com> Signed-off-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-21i40evf: fix multiple crashes on removeMitch Williams1-6/+7
Depending upon the state of the driver, there are several potential pitfalls on remove. Kill the watchdog task so rmmod doesn't hang. Check the adapter->msix_entries field, not the num_msix_vectors field, which is never cleared. Change-ID: I0546048477f09fc19e481bd37efa30daae4faa88 Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Sibai Li <sibai.li@intel.com> Signed-off-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-21i40evf: remove VLAN filters on closeMitch Williams1-0/+5
We remove all the MAC filters, so remove the VLAN filters, too. Change-ID: I4f7559acdf005dc3f359bf6460ce32d183c8878b Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Sibai Li <sibai.li@intel.com> Signed-off-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-21i40evf: request reset on tx hangMitch Williams3-3/+20
If the kernel watchdog bites us, ask the PF to reset us and attempt to reinit the driver. Change-ID: Ic97665aeeed71ce712b9c4f057e78ff8372522b9 Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Sibai Li <sibai.li@intel.com> Signed-off-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-19pcnet32: add missing check for pci_dma_mapping_errorDon Fry1-27/+81
The pci_map_single calls never checked for error. Add error checking as requested by someone last year. Tested on 79c972. Signed-off-by: Don Fry <pcnet32@frontier.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-19pcnet32: fix reallocation errorDon Fry1-9/+9
pcnet32_realloc_rx_ring() only worked on the first log2 number of entries in the receive ring instead of the all the entries. Replaced "1 << size" with more descriptive variable. This is my original bug from 2006. Found while testing another problem. Tested on 79C972 and 79C976. Signed-off-by: Don Fry <pcnet32@frontier.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-19Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller18-24/+385
Conflicts: drivers/net/bonding/bond_3ad.h drivers/net/bonding/bond_main.c Two minor conflicts in bonding, both of which were overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-19Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds17-23/+384
Pull networking fixes from David Miller: 1) kvaser CAN driver has fixed limits of some of it's table, validate that we won't exceed those limits at probe time. Fix from Olivier Sobrie. 2) Fix rtl8192ce disabling interrupts for too long, from Olivier Langlois. 3) Fix botched shift in ath5k driver, from Dan Carpenter. 4) Fix corruption of deferred packets in TIPC, from Erik Hugne. 5) Fix newlink error path in macvlan driver, from Cong Wang. 6) Fix netpoll deadlock in bonding, from Ding Tianhong. 7) Handle GSO packets properly in forwarding path when fragmentation is necessary on egress, from Florian Westphal. 8) Fix axienet build errors, from Michal Simek. 9) Fix refcounting of ubufs on tx in vhost net driver, from Michael S Tsirkin. 10) Carrier status isn't set properly in hyperv driver, from Haiyang Zhang. 11) Missing pci_disable_device() in tulip_remove_one), from Ingo Molnar. 12) AF_PACKET qdisc bypass mode doesn't adhere to driver provided TX queue selection method. Add a fallback method mechanism to fix this bug, from Daniel Borkmann. 13) Fix regression in link local route handling on GRE tunnels, from Nicolas Dichtel. 14) Bonding can assign dup aggregator IDs in some sequences of configuration, fix by making the allocation counter per-bond instead of global. From Jiri Bohac. 15) sctp_connectx() needs compat translations, from Daniel Borkmann. 16) Fix of_mdio PHY interrupt parsing, from Ben Dooks * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (62 commits) MAINTAINERS: add entry for the PHY library of_mdio: fix phy interrupt passing net: ethernet: update dependency and help text of mvneta NET: fec: only enable napi if we are successful af_packet: remove a stray tab in packet_set_ring() net: sctp: fix sctp_connectx abi for ia32 emulation/compat mode ipv4: fix counter in_slow_tot irtty-sir.c: Do not set_termios() on irtty_close() bonding: 802.3ad: make aggregator_identifier bond-private usbnet: remove generic hard_header_len check gre: add link local route when local addr is any batman-adv: fix potential kernel paging error for unicast transmissions batman-adv: avoid double free when orig_node initialization fails batman-adv: free skb on TVLV parsing success batman-adv: fix TT CRC computation by ensuring byte order batman-adv: fix potential orig_node reference leak batman-adv: avoid potential race condition when adding a new neighbour batman-adv: properly check pskb_may_pull return value batman-adv: release vlan object after checking the CRC batman-adv: fix TT-TVLV parsing on OGM reception ...
2014-02-19net: ethernet: update dependency and help text of mvnetaThomas Petazzoni1-3/+3
With the introduction of the support for Armada 375 and Armada 38x, the hidden Kconfig option MACH_ARMADA_370_XP is being renamed to MACH_MVEBU_V7. Therefore, the dependency that was used for the mvneta driver can no longer work. This commit replaces this dependency by a dependency on PLAT_ORION, which is used similarly for the mv643xx_eth driver. In addition to this, it takes this opportunity to adjust the description and help text to indicate that the driver can is also used for Armada 38x. Note that Armada 375 cannot use this driver as it has a completely different networking unit, which will require a separate driver. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by: Jason Cooper <jason@lakedaemon.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-19NET: fec: only enable napi if we are successfulRussell King1-2/+2
If napi is left enabled after a failed attempt to bring the interface up, we BUG: fec 2188000.ethernet eth0: no PHY, assuming direct connection to switch libphy: PHY fixed-0:00 not found fec 2188000.ethernet eth0: could not attach to PHY ------------[ cut here ]------------ kernel BUG at include/linux/netdevice.h:502! Internal error: Oops - BUG: 0 [#1] SMP ARM ... PC is at fec_enet_open+0x4d0/0x500 LR is at __dev_open+0xa4/0xfc Only enable napi after we are past all the failure paths. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-19sh_eth: add device tree supportSergei Shtylyov1-3/+66
Add support of the device tree probing for the Renesas SH-Mobile SoCs documenting the device tree binding as necessary. This work is loosely based on the original patch by Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-19Drivers: net: ethernet: 3com: 3c589_cs fixed coding style issuesJustin van Wijngaarden1-543/+584
checkpatch.pl clean-up, from 14 error/ 277 warnings, to 0 errors, 7 warnings Signed-off-by: Justin van Wijngaarden <justinvanwijngaarden@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-19cxgb4: Add more PCI device ids.Hariprasad Shenai1-0/+4
Signed-off-by: Hariprasad Shenai <hariprasad@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-19cxgb4: Don't assume LSO only uses SGL path in t4_eth_xmit()Kumar Sanghvi1-10/+22
Also, modify is_eth_imm() to return header length so it doesn't have to be recomputed in calc_tx_flits(). Based on original work by Mike Werner <werner@chelsio.com> Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-19cxgb4: Remove unused registers and add missing onesKumar Sanghvi1-2/+2
Remove unused registers for registers list, and add missing ones Based on original work by Santosh Rastapur <santosh@chelsio.com> Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-19cxgb4: Query firmware for T5 ULPTX MEMWRITE DSGL capabilitiesKumar Sanghvi4-0/+19
Query firmware to see whether we're allowed to use T5 ULPTX MEMWRITE DSGL capabilities. Also pass that information to Upper Layer Drivers via the new (struct cxgb4_lld_info).ulptx_memwrite_dsgl boolean. Based on original work by Casey Leedom <leedom@chelsio.com> Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-19cxgb4: LE-Workaround is not atomic in firmwareKumar Sanghvi1-1/+5
The LE workaround in firmware is not atomic and fw_ofld_connection_wrs must not interleave. Therefore, when the workaround is enabled, we need to send all ctrlq WRs on a single ctrl queue. Based on original work by Santosh Rastapur <santosh@chelsio.com> Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-19cxgb4: Allow >10G ports to have multiple queuesKumar Sanghvi1-4/+5
Based on original work by Divy Le Ray. Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-19cxgb4: Print adapter VPD Part Number instead of Engineering Change fieldKumar Sanghvi3-3/+8
When we attach to adapter, print VPD Part Number instead of Engineering Change field. Based on original work by Casey Leedom <leedom@chelsio.com> Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-19cxgb4: Add support to recognize 40G linksKumar Sanghvi4-10/+54
Also, create a new Common Code interface to translate Firmware Port Technology Type values (enum fw_port_type) to string descriptions. This will allow us to maintain the description translation table in one place rather than in every driver. Based on original work by Scott Bardone and Casey Leedom <leedom@chelsio.com> Signed-off-by: Kumar Sanghvi <kumaras@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-19niu: Use pci_enable_msix_range() instead of pci_enable_msix()Alexander Gordeev1-8/+3
As result of deprecation of MSI-X/MSI enablement functions pci_enable_msix() and pci_enable_msi_block() all drivers using these two interfaces need to be updated to use the new pci_enable_msi_range() and pci_enable_msix_range() interfaces. Signed-off-by: Alexander Gordeev <agordeev@redhat.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jingoo Han <jg1.han@samsung.com> Cc: netdev@vger.kernel.org Cc: linux-pci@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-19sfc: Use pci_enable_msix_range() instead of pci_enable_msix()Alexander Gordeev1-11/+9
As result of deprecation of MSI-X/MSI enablement functions pci_enable_msix() and pci_enable_msi_block() all drivers using these two interfaces need to be updated to use the new pci_enable_msi_range() and pci_enable_msix_range() interfaces. Signed-off-by: Alexander Gordeev <agordeev@redhat.com> Cc: Shradha Shah <sshah@solarflare.com> Cc: linux-net-drivers@solarflare.com Cc: netdev@vger.kernel.org Cc: linux-pci@vger.kernel.org Acked-by: Shradha Shah <sshah@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-19qlge: Use pci_enable_msix_range() instead of pci_enable_msix()Alexander Gordeev1-11/+4
As result of deprecation of MSI-X/MSI enablement functions pci_enable_msix() and pci_enable_msi_block() all drivers using these two interfaces need to be updated to use the new pci_enable_msi_range() and pci_enable_msix_range() interfaces. Signed-off-by: Alexander Gordeev <agordeev@redhat.com> Cc: Shahed Shaikh <shahed.shaikh@qlogic.com> Cc: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com> Cc: Ron Mercer <ron.mercer@qlogic.com> Cc: linux-driver@qlogic.com Cc: netdev@vger.kernel.org Cc: linux-pci@vger.kernel.org Acked-by: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-19qlge: Get rid of an redundant assignmentAlexander Gordeev1-1/+0
Signed-off-by: Alexander Gordeev <agordeev@redhat.com> Cc: Shahed Shaikh <shahed.shaikh@qlogic.com> Cc: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com> Cc: Ron Mercer <ron.mercer@qlogic.com> Cc: linux-driver@qlogic.com Cc: netdev@vger.kernel.org Cc: linux-pci@vger.kernel.org Acked-by: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-02-19qlcnic: Use pci_enable_msix_range() instead of pci_enable_msix()Alexander Gordeev1-2/+6
As result of deprecation of MSI-X/MSI enablement functions pci_enable_msix() and pci_enable_msi_block() all drivers using these two interfaces need to be updated to use the new pci_enable_msi_range() and pci_enable_msix_range() interfaces. Signed-off-by: Alexander Gordeev <agordeev@redhat.com> Cc: Himanshu Madhani <himanshu.madhani@qlogic.com> Cc: Rajesh Borundia <rajesh.borundia@qlogic.com> Cc: Shahed Shaikh <shahed.shaikh@qlogic.com> Cc: linux-driver@qlogic.com Cc: netdev@vger.kernel.org Cc: linux-pci@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>