summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet
AgeCommit message (Collapse)AuthorFilesLines
2021-09-12net: stmmac: use GFP_DMA32Matteo Croce1-4/+8
Signed-off-by: Matteo Croce <mcroce@microsoft.com>
2021-09-12net: stmmac: Configure gtxclk based on speedTom1-0/+47
2021-09-12stmmac: align RX buffersMatteo Croce1-2/+2
commit a955318fe67ec0d962760b5ee58e74bffaf649b8 upstream. On RX an SKB is allocated and the received buffer is copied into it. But on some architectures, the memcpy() needs the source and destination buffers to have the same alignment to be efficient. This is not our case, because SKB data pointer is misaligned by two bytes to compensate the ethernet header. Align the RX buffer the same way as the SKB one, so the copy is faster. An iperf3 RX test gives a decent improvement on a RISC-V machine: before: [ ID] Interval Transfer Bitrate Retr [ 5] 0.00-10.00 sec 733 MBytes 615 Mbits/sec 88 sender [ 5] 0.00-10.01 sec 730 MBytes 612 Mbits/sec receiver after: [ ID] Interval Transfer Bitrate Retr [ 5] 0.00-10.00 sec 1.10 GBytes 942 Mbits/sec 0 sender [ 5] 0.00-10.00 sec 1.09 GBytes 940 Mbits/sec receiver And the memcpy() overhead during the RX drops dramatically. before: Overhead Shared O Symbol 43.35% [kernel] [k] memcpy 33.77% [kernel] [k] __asm_copy_to_user 3.64% [kernel] [k] sifive_l2_flush64_range after: Overhead Shared O Symbol 45.40% [kernel] [k] __asm_copy_to_user 28.09% [kernel] [k] memcpy 4.27% [kernel] [k] sifive_l2_flush64_range Signed-off-by: Matteo Croce <mcroce@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-12Revert "r8169: avoid link-up interrupt issue on RTL8106e if user enables ASPM"Hayes Wang1-0/+1
commit 2115d3d482656ea702f7cf308c0ded3500282903 upstream. This reverts commit 1ee8856de82faec9bc8bd0f2308a7f27e30ba207. This is used to re-enable ASPM on RTL8106e, if it is possible. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-09-12net: ll_temac: Remove left-over debug messageEsben Haabendal1-3/+1
commit ce03b94ba682a67e8233c9ee3066071656ded58f upstream. Fixes: f63963411942 ("net: ll_temac: Avoid ndo_start_xmit returning NETDEV_TX_BUSY") Signed-off-by: Esben Haabendal <esben@geanix.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-09-08qede: Fix memset corruptionShai Malin1-1/+1
[ Upstream commit e543468869e2532f5d7926e8f417782b48eca3dc ] Thanks to Kees Cook who detected the problem of memset that starting from not the first member, but sized for the whole struct. The better change will be to remove the redundant memset and to clear only the msix_cnt member. Signed-off-by: Prabhakar Kushwaha <pkushwaha@marvell.com> Signed-off-by: Ariel Elior <aelior@marvell.com> Signed-off-by: Shai Malin <smalin@marvell.com> Reported-by: Kees Cook <keescook@chromium.org> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-09-08net: macb: Add a NULL check on desc_ptpHarini Katakam1-1/+10
[ Upstream commit 85520079afce885b80647fbd0d13d8f03d057167 ] macb_ptp_desc will not return NULL under most circumstances with correct Kconfig and IP design config register. But for the sake of the extreme corner case, check for NULL when using the helper. In case of rx_tstamp, no action is necessary except to return (similar to timestamp disabled) and warn. In case of TX, return -EINVAL to let the skb be free. Perform this check before marking skb in progress. Fixes coverity warning: (4) Event dereference: Dereferencing a null pointer "desc_ptp" Signed-off-by: Harini Katakam <harini.katakam@xilinx.com> Reviewed-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-09-08qed: Fix the VF msix vectors flowShai Malin1-1/+6
[ Upstream commit b0cd08537db8d2fbb227cdb2e5835209db295a24 ] For VFs we should return with an error in case we didn't get the exact number of msix vectors as we requested. Not doing that will lead to a crash when starting queues for this VF. Signed-off-by: Prabhakar Kushwaha <pkushwaha@marvell.com> Signed-off-by: Ariel Elior <aelior@marvell.com> Signed-off-by: Shai Malin <smalin@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-09-03qed: Fix null-pointer dereference in qed_rdma_create_qp()Shai Malin1-2/+1
[ Upstream commit d33d19d313d3466abdf8b0428be7837aff767802 ] Fix a possible null-pointer dereference in qed_rdma_create_qp(). Changes from V2: - Revert checkpatch fixes. Reported-by: TOTE Robot <oslab@tsinghua.edu.cn> Signed-off-by: Ariel Elior <aelior@marvell.com> Signed-off-by: Shai Malin <smalin@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-09-03qed: qed ll2 race condition fixesShai Malin1-0/+20
[ Upstream commit 37110237f31105d679fc0aa7b11cdec867750ea7 ] Avoiding qed ll2 race condition and NULL pointer dereference as part of the remove and recovery flows. Changes form V1: - Change (!p_rx->set_prod_addr). - qed_ll2.c checkpatch fixes. Change from V2: - Revert "qed_ll2.c checkpatch fixes". Signed-off-by: Ariel Elior <aelior@marvell.com> Signed-off-by: Shai Malin <smalin@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-09-03net: stmmac: fix kernel panic due to NULL pointer dereference of plat->estWong Vee Khee1-5/+7
[ Upstream commit 82a44ae113b7b35850f4542f0443fcab221e376a ] In the case of taprio offload is not enabled, the error handling path causes a kernel crash due to kernel NULL pointer deference. Fix this by adding check for NULL before attempt to access 'plat->est' on the mutex_lock() call. The following kernel panic is observed without this patch: RIP: 0010:mutex_lock+0x10/0x20 Call Trace: tc_setup_taprio+0x482/0x560 [stmmac] kmem_cache_alloc_trace+0x13f/0x490 taprio_disable_offload.isra.0+0x9d/0x180 [sch_taprio] taprio_destroy+0x6c/0x100 [sch_taprio] qdisc_create+0x2e5/0x4f0 tc_modify_qdisc+0x126/0x740 rtnetlink_rcv_msg+0x12b/0x380 _raw_spin_lock_irqsave+0x19/0x40 _raw_spin_unlock_irqrestore+0x18/0x30 create_object+0x212/0x340 rtnl_calcit.isra.0+0x110/0x110 netlink_rcv_skb+0x50/0x100 netlink_unicast+0x191/0x230 netlink_sendmsg+0x243/0x470 sock_sendmsg+0x5e/0x60 ____sys_sendmsg+0x20b/0x280 copy_msghdr_from_user+0x5c/0x90 __mod_memcg_state+0x87/0xf0 ___sys_sendmsg+0x7c/0xc0 lru_cache_add+0x7f/0xa0 _raw_spin_unlock+0x16/0x30 wp_page_copy+0x449/0x890 handle_mm_fault+0x921/0xfc0 __sys_sendmsg+0x59/0xa0 do_syscall_64+0x33/0x40 entry_SYSCALL_64_after_hwframe+0x44/0xa9 ---[ end trace b1f19b24368a96aa ]--- Fixes: b60189e0392f ("net: stmmac: Integrate EST with TAPRIO scheduler API") Cc: <stable@vger.kernel.org> # 5.10.x Signed-off-by: Wong Vee Khee <vee.khee.wong@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-09-03net: stmmac: add mutex lock to protect est parametersXiaoliang Yang1-1/+11
[ Upstream commit b2aae654a4794ef898ad33a179f341eb610f6b85 ] Add a mutex lock to protect est structure parameters so that the EST parameters can be updated by other threads. Signed-off-by: Xiaoliang Yang <xiaoliang.yang_1@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-09-03net: hns3: fix get wrong pfc_en when query PFC configurationGuangbin Huang1-11/+2
[ Upstream commit 8c1671e0d13d4a0ba4fb3a0da932bf3736d7ff73 ] Currently, when query PFC configuration by dcbtool, driver will return PFC enable status based on TC. As all priorities are mapped to TC0 by default, if TC0 is enabled, then all priorities mapped to TC0 will be shown as enabled status when query PFC setting, even though some priorities have never been set. for example: $ dcb pfc show dev eth0 pfc-cap 4 macsec-bypass off delay 0 prio-pfc 0:off 1:off 2:off 3:off 4:off 5:off 6:off 7:off $ dcb pfc set dev eth0 prio-pfc 0:on 1:on 2:on 3:on $ dcb pfc show dev eth0 pfc-cap 4 macsec-bypass off delay 0 prio-pfc 0:on 1:on 2:on 3:on 4:on 5:on 6:on 7:on To fix this problem, just returns user's PFC config parameter saved in driver. Fixes: cacde272dd00 ("net: hns3: Add hclge_dcb module for the support of DCB feature") Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-09-03net: hns3: fix duplicate node in VLAN listGuojia Liao1-1/+5
[ Upstream commit 94391fae82f71c98ecc7716a32611fcca73c74eb ] VLAN list should not be added duplicate VLAN node, otherwise it would cause "add failed" when restore VLAN from VLAN list, so this patch adds VLAN ID check before adding node into VLAN list. Fixes: c6075b193462 ("net: hns3: Record VF vlan tables") Signed-off-by: Guojia Liao <liaoguojia@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-09-03net: hns3: fix speed unknown issue in bond 4Yonglong Liu3-3/+3
[ Upstream commit b15c072a9f4a404c09ad589477f4389034742a8b ] In bond 4, when the link goes down and up repeatedly, the bond may get an unknown speed, and then this port can not work. The driver notify netif_carrier_on() before update the link state, when the bond receive carrier on, will query the speed of the port, if the query operation happens before updating the link state, will get an unknown speed. So need to notify netif_carrier_on() after update the link state. Fixes: 46a3df9f9718 ("net: hns3: Add HNS3 Acceleration Engine & Compatibility Layer Support") Fixes: e2cb1dec9779 ("net: hns3: Add HNS3 VF HCL(Hardware Compatibility Layer) Support") Signed-off-by: Yonglong Liu <liuyonglong@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-09-03net: hns3: add waiting time before cmdq memory is releasedYufeng Mo4-2/+13
[ Upstream commit a96d9330b02a3d051ae689bc2c5e7d3a2ba25594 ] After the cmdq registers are cleared, the firmware may take time to clear out possible left over commands in the cmdq. Driver must release cmdq memory only after firmware has completed processing of left over commands. Fixes: 232d0d55fca6 ("net: hns3: uninitialize command queue while unloading PF driver") Signed-off-by: Yufeng Mo <moyufeng@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-09-03net: hns3: clear hardware resource when loading driverYufeng Mo2-0/+29
[ Upstream commit 1a6d281946c330cee2855f6d0cd796616e54601f ] If a PF is bonded to a virtual machine and the virtual machine exits unexpectedly, some hardware resource cannot be cleared. In this case, loading driver may cause exceptions. Therefore, the hardware resource needs to be cleared when the driver is loaded. Fixes: 46a3df9f9718 ("net: hns3: Add HNS3 Acceleration Engine & Compatibility Layer Support") Signed-off-by: Yufeng Mo <moyufeng@huawei.com> Signed-off-by: Salil Mehta <salil.mehta@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-09-03cxgb4: dont touch blocked freelist bitmap after freeRahul Lakkireddy1-4/+3
[ Upstream commit 43fed4d48d325e0a61dc2638a84da972fbb1087b ] When adapter init fails, the blocked freelist bitmap is already freed up and should not be touched. So, move the bitmap zeroing closer to where it was successfully allocated. Also handle adapter init failure unwind path immediately and avoid setting up RDMA memory windows. Fixes: 5b377d114f2b ("cxgb4: Add debugfs facility to inject FL starvation") Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-09-03net: marvell: fix MVNETA_TX_IN_PRGRS bit numberMaxim Kiselev1-1/+1
[ Upstream commit 359f4cdd7d78fdf8c098713b05fee950a730f131 ] According to Armada XP datasheet bit at 0 position is corresponding for TxInProg indication. Fixes: c5aff18204da ("net: mvneta: driver for Marvell Armada 370/XP network unit") Signed-off-by: Maxim Kiselev <bigunclemax@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-09-03xgene-v2: Fix a resource leak in the error handling path of 'xge_probe()'Christophe JAILLET1-1/+3
[ Upstream commit 5ed74b03eb4d08f5dd281dcb5f1c9bb92b363a8d ] A successful 'xge_mdio_config()' call should be balanced by a corresponding 'xge_mdio_remove()' call in the error handling path of the probe, as already done in the remove function. Update the error handling path accordingly. Fixes: ea8ab16ab225 ("drivers: net: xgene-v2: Add MDIO support") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-09-03e1000e: Do not take care about recovery NVM checksumSasha Neftin1-7/+11
[ Upstream commit 4051f68318ca9f3d3becef3b54e70ad2c146df97 ] On new platforms, the NVM is read-only. Attempting to update the NVM is causing a lockup to occur. Do not attempt to write to the NVM on platforms where it's not supported. Emit an error message when the NVM checksum is invalid. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=213667 Fixes: fb776f5d57ee ("e1000e: Add support for Tiger Lake") Suggested-by: Dima Ruinskiy <dima.ruinskiy@intel.com> Suggested-by: Vitaly Lifshits <vitaly.lifshits@intel.com> Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Dvora Fuxbrumer <dvorax.fuxbrumer@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-09-03e1000e: Fix the max snoop/no-snoop latency for 10MSasha Neftin2-1/+16
[ Upstream commit 44a13a5d99c71bf9e1676d9e51679daf4d7b3d73 ] We should decode the latency and the max_latency before directly compare. The latency should be presented as lat_enc = scale x value: lat_enc_d = (lat_enc & 0x0x3ff) x (1U << (5*((max_ltr_enc & 0x1c00) >> 10))) Fixes: cf8fb73c23aa ("e1000e: add support for LTR on I217/I218") Suggested-by: Yee Li <seven.yi.lee@gmail.com> Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Dvora Fuxbrumer <dvorax.fuxbrumer@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-09-03igc: Use num_tx_queues when iterating over tx_ring queueToshiki Nishioka1-2/+2
[ Upstream commit 691bd4d7761992914a0e83c27a4ce57d01474cda ] Use num_tx_queues rather than the IGC_MAX_TX_QUEUES fixed number 4 when iterating over tx_ring queue since instantiated queue count could be less than 4 where on-line cpu count is less than 4. Fixes: ec50a9d437f0 ("igc: Add support for taprio offloading") Signed-off-by: Toshiki Nishioka <toshiki.nishioka@intel.com> Signed-off-by: Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@intel.com> Tested-by: Muhammad Husaini Zulkifli <muhammad.husaini.zulkifli@intel.com> Acked-by: Sasha Neftin <sasha.neftin@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-09-03igc: fix page fault when thunderbolt is unpluggedAaron Ma2-14/+21
[ Upstream commit 4b79959510e6612d80f8d86022e0cb44eee6f4a2 ] After unplug thunderbolt dock with i225, pciehp interrupt is triggered, remove call will read/write mmio address which is already disconnected, then cause page fault and make system hang. Check PCI state to remove device safely. Trace: BUG: unable to handle page fault for address: 000000000000b604 Oops: 0000 [#1] SMP NOPTI RIP: 0010:igc_rd32+0x1c/0x90 [igc] Call Trace: igc_ptp_suspend+0x6c/0xa0 [igc] igc_ptp_stop+0x12/0x50 [igc] igc_remove+0x7f/0x1c0 [igc] pci_device_remove+0x3e/0xb0 __device_release_driver+0x181/0x240 Fixes: 13b5b7fd6a4a ("igc: Add support for Tx/Rx rings") Fixes: b03c49cde61f ("igc: Save PTP time before a reset") Signed-off-by: Aaron Ma <aaron.ma@canonical.com> Tested-by: Dvora Fuxbrumer <dvorax.fuxbrumer@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-09-03ice: do not abort devlink info if board identifier can't be foundJacob Keller1-1/+3
[ Upstream commit a8f89fa27773a8c96fd09fb4e2f4892d794f21f6 ] The devlink dev info command reports version information about the device and firmware running on the board. This includes the "board.id" field which is supposed to represent an identifier of the board design. The ice driver uses the Product Board Assembly identifier for this. In some cases, the PBA is not present in the NVM. If this happens, devlink dev info will fail with an error. Instead, modify the ice_info_pba function to just exit without filling in the context buffer. This will cause the board.id field to be skipped. Log a dev_dbg message in case someone wants to confirm why board.id is not showing up for them. Fixes: e961b679fb0b ("ice: add board identifier info to devlink .info_get") Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Tony Brelinski <tonyx.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://lore.kernel.org/r/20210819223451.245613-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-09-03net: stmmac: fix kernel panic due to NULL pointer dereference of buf->xdpSong Yoong Siang1-4/+4
commit 2b9fff64f03219d78044d1ab40dde8e3d42e968a upstream. Ensure a valid XSK buffer before proceed to free the xdp buffer. The following kernel panic is observed without this patch: RIP: 0010:xp_free+0x5/0x40 Call Trace: stmmac_napi_poll_rxtx+0x332/0xb30 [stmmac] ? stmmac_tx_timer+0x3c/0xb0 [stmmac] net_rx_action+0x13d/0x3d0 __do_softirq+0xfc/0x2fb ? smpboot_register_percpu_thread+0xe0/0xe0 run_ksoftirqd+0x32/0x70 smpboot_thread_fn+0x1d8/0x2c0 kthread+0x169/0x1a0 ? kthread_park+0x90/0x90 ret_from_fork+0x1f/0x30 ---[ end trace 0000000000000002 ]--- Fixes: bba2556efad6 ("net: stmmac: Enable RX via AF_XDP zero-copy") Cc: <stable@vger.kernel.org> # 5.13.x Suggested-by: Ong Boon Leong <boon.leong.ong@intel.com> Signed-off-by: Song Yoong Siang <yoong.siang.song@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-09-03net: stmmac: fix kernel panic due to NULL pointer dereference of xsk_poolSong Yoong Siang1-6/+6
commit a6451192da2691dcf39507bd758dde35d4606ee1 upstream. After free xsk_pool, there is possibility that napi polling is still running in the middle, thus causes a kernel crash due to kernel NULL pointer dereference of rx_q->xsk_pool and tx_q->xsk_pool. Fix this by changing the XDP pool setup sequence to: 1. disable napi before free xsk_pool 2. enable napi after init xsk_pool The following kernel panic is observed without this patch: RIP: 0010:xsk_uses_need_wakeup+0x5/0x10 Call Trace: stmmac_napi_poll_rxtx+0x3a9/0xae0 [stmmac] __napi_poll+0x27/0x130 net_rx_action+0x233/0x280 __do_softirq+0xe2/0x2b6 run_ksoftirqd+0x1a/0x20 smpboot_thread_fn+0xac/0x140 ? sort_range+0x20/0x20 kthread+0x124/0x150 ? set_kthread_struct+0x40/0x40 ret_from_fork+0x1f/0x30 ---[ end trace a77c8956b79ac107 ]--- Fixes: bba2556efad6 ("net: stmmac: Enable RX via AF_XDP zero-copy") Cc: <stable@vger.kernel.org> # 5.13.x Signed-off-by: Song Yoong Siang <yoong.siang.song@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-09-03net: mscc: Fix non-GPL export of regmap APIsMark Brown1-8/+8
[ Upstream commit 48c812e0327744b4965296f65c23fe2405692afc ] The ocelot driver makes use of regmap, wrapping it with driver specific operations that are thin wrappers around the core regmap APIs. These are exported with EXPORT_SYMBOL, dropping the _GPL from the core regmap exports which is frowned upon. Add _GPL suffixes to at least the APIs that are doing register I/O. Signed-off-by: Mark Brown <broonie@kernel.org> Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-08-26net: dpaa2-switch: disable the control interface on error pathVladimir Oltean1-18/+18
[ Upstream commit cd0a719fbd702eb4b455a6ad986483750125588a ] Currently dpaa2_switch_takedown has a funny name and does not do the opposite of dpaa2_switch_init, which makes probing fail when we need to handle an -EPROBE_DEFER. A sketch of what dpaa2_switch_init does: dpsw_open dpaa2_switch_detect_features dpsw_reset for (i = 0; i < ethsw->sw_attr.num_ifs; i++) { dpsw_if_disable dpsw_if_set_stp dpsw_vlan_remove_if_untagged dpsw_if_set_tci dpsw_vlan_remove_if } dpsw_vlan_remove alloc_ordered_workqueue dpsw_fdb_remove dpaa2_switch_ctrl_if_setup When dpaa2_switch_takedown is called from the error path of dpaa2_switch_probe(), the control interface, enabled by dpaa2_switch_ctrl_if_setup from dpaa2_switch_init, remains enabled, because dpaa2_switch_takedown does not call dpaa2_switch_ctrl_if_teardown. Since dpaa2_switch_probe might fail due to EPROBE_DEFER of a PHY, this means that a second probe of the driver will happen with the control interface directly enabled. This will trigger a second error: [ 93.273528] fsl_dpaa2_switch dpsw.0: dpsw_ctrl_if_set_pools() failed [ 93.281966] fsl_dpaa2_switch dpsw.0: fsl_mc_driver_probe failed: -13 [ 93.288323] fsl_dpaa2_switch: probe of dpsw.0 failed with error -13 Which if we investigate the /dev/dpaa2_mc_console log, we find out is caused by: [E, ctrl_if_set_pools:2211, DPMNG] ctrl_if must be disabled So make dpaa2_switch_takedown do the opposite of dpaa2_switch_init (in reasonable limits, no reason to change STP state, re-add VLANs etc), and rename it to something more conventional, like dpaa2_switch_teardown. Fixes: 613c0a5810b7 ("staging: dpaa2-switch: enable the control interface") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com> Link: https://lore.kernel.org/r/20210819141755.1931423-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-08-26iavf: Fix ping is lost after untrusted VF had tried to change MACSylwester Dziedziuch3-2/+47
[ Upstream commit 8da80c9d50220a8e4190a4eaa0dd6aeefcbbb5bf ] Make changes to MAC address dependent on the response of PF. Disallow changes to HW MAC address and MAC filter from untrusted VF, thanks to that ping is not lost if VF tries to change MAC. Add a new field in iavf_mac_filter, to indicate whether there was response from PF for given filter. Based on this field pass or discard the filter. If untrusted VF tried to change it's address, it's not changed. Still filter was changed, because of that ping couldn't go through. Fixes: c5c922b3e09b ("iavf: fix MAC address setting for VFs when filter is rejected") Signed-off-by: Przemyslaw Patynowski <przemyslawx.patynowski@intel.com> Signed-off-by: Sylwester Dziedziuch <sylwesterx.dziedziuch@intel.com> Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com> Tested-by: Gurucharan G <Gurucharanx.g@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-08-26i40e: Fix ATR queue selectionArkadiusz Kubalewski1-2/+1
[ Upstream commit a222be597e316389f9f8c26033352c124ce93056 ] Without this patch, ATR does not work. Receive/transmit uses queue selection based on SW DCB hashing method. If traffic classes are not configured for PF, then use netdev_pick_tx function for selecting queue for packet transmission. Instead of calling i40e_swdcb_skb_tx_hash, call netdev_pick_tx, which ensures that packet is transmitted/received from CPU that is running the application. Reproduction steps: 1. Load i40e driver 2. Map each MSI interrupt of i40e port for each CPU 3. Disable ntuple, enable ATR i.e.: ethtool -K $interface ntuple off ethtool --set-priv-flags $interface flow-director-atr 4. Run application that is generating traffic and is bound to a single CPU, i.e.: taskset -c 9 netperf -H 1.1.1.1 -t TCP_RR -l 10 5. Observe behavior: Application's traffic should be restricted to the CPU provided in taskset. Fixes: 89ec1f0886c1 ("i40e: Fix queue-to-TC mapping on Tx") Signed-off-by: Przemyslaw Patynowski <przemyslawx.patynowski@intel.com> Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com> Tested-by: Dave Switzer <david.switzer@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-08-26net: mscc: ocelot: allow forwarding from bridge ports to the tag_8021q CPU portVladimir Oltean1-0/+1
[ Upstream commit c1930148a3941f891ddbd76fceaa4e10a957ccf2 ] Currently we are unable to ping a bridge on top of a felix switch which uses the ocelot-8021q tagger. The packets are dropped on the ingress of the user port and the 'drop_local' counter increments (the counter which denotes drops due to no valid destinations). Dumping the PGID tables, it becomes clear that the PGID_SRC of the user port is zero, so it has no valid destinations. But looking at the code, the cpu_fwd_mask (the bit mask of DSA tag_8021q ports) is clearly missing from the forwarding mask of ports that are under a bridge. So this has always been broken. Looking at the version history of the patch, in v7 https://patchwork.kernel.org/project/netdevbpf/patch/20210125220333.1004365-12-olteanv@gmail.com/ the code looked like this: /* Standalone ports forward only to DSA tag_8021q CPU ports */ unsigned long mask = cpu_fwd_mask; (...) } else if (ocelot->bridge_fwd_mask & BIT(port)) { mask |= ocelot->bridge_fwd_mask & ~BIT(port); while in v8 (the merged version) https://patchwork.kernel.org/project/netdevbpf/patch/20210129010009.3959398-12-olteanv@gmail.com/ it looked like this: unsigned long mask; (...) } else if (ocelot->bridge_fwd_mask & BIT(port)) { mask = ocelot->bridge_fwd_mask & ~BIT(port); So the breakage was introduced between v7 and v8 of the patch. Fixes: e21268efbe26 ("net: dsa: felix: perform switch setup for tag_8021q") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Link: https://lore.kernel.org/r/20210817160425.3702809-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-08-26ixgbe, xsk: clean up the resources in ixgbe_xsk_pool_enable error pathWang Hai1-1/+4
[ Upstream commit 1b80fec7b043552e01609bae7d0aad07aa742adc ] In ixgbe_xsk_pool_enable(), if ixgbe_xsk_wakeup() fails, We should restore the previous state and clean up the resources. Add the missing clear af_xdp_zc_qps and unmap dma to fix this bug. Fixes: d49e286d354e ("ixgbe: add tracking of AF_XDP zero-copy state for each queue pair") Fixes: 4a9b32f30f80 ("ixgbe: fix potential RX buffer starvation for AF_XDP") Signed-off-by: Wang Hai <wanghai38@huawei.com> Acked-by: Magnus Karlsson <magnus.karlsson@intel.com> Tested-by: Sandeep Penigalapati <sandeep.penigalapati@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://lore.kernel.org/r/20210817203736.3529939-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-08-26net: qlcnic: add missed unlock in qlcnic_83xx_flash_read32Dinghao Liu1-1/+3
[ Upstream commit 0a298d133893c72c96e2156ed7cb0f0c4a306a3e ] qlcnic_83xx_unlock_flash() is called on all paths after we call qlcnic_83xx_lock_flash(), except for one error path on failure of QLCRD32(), which may cause a deadlock. This bug is suggested by a static analysis tool, please advise. Fixes: 81d0aeb0a4fff ("qlcnic: flash template based firmware reset recovery") Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn> Link: https://lore.kernel.org/r/20210816131405.24024-1-dinghao.liu@zju.edu.cn Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-08-26bnxt_en: Add missing DMA memory barriersMichael Chan1-0/+12
[ Upstream commit 828affc27ed43441bd1efdaf4e07e96dd43a0362 ] Each completion ring entry has a valid bit to indicate that the entry contains a valid completion event. The driver's main poll loop __bnxt_poll_work() has the proper dma_rmb() to make sure the valid bit of the next entry has been checked before proceeding further. But when we call bnxt_rx_pkt() to process the RX event, the RX completion event consists of two completion entries and only the first entry has been checked to be valid. We need the same barrier after checking the next completion entry. Add missing dma_rmb() barriers in bnxt_rx_pkt() and other similar locations. Fixes: 67a95e2022c7 ("bnxt_en: Need memory barrier when processing the completion ring.") Reported-by: Lance Richardson <lance.richardson@broadcom.com> Reviewed-by: Andy Gospodarek <gospo@broadcom.com> Reviewed-by: Lance Richardson <lance.richardson@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-08-26bnxt_en: Disable aRFS if running on 212 firmwareMichael Chan1-0/+3
[ Upstream commit 976e52b718c3de9077fff8f3f674afb159c57fb1 ] 212 firmware broke aRFS, so disable it. Traffic may stop after ntuple filters are inserted and deleted by the 212 firmware. Fixes: ae10ae740ad2 ("bnxt_en: Add new hardware RFS mode.") Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-08-26bnxt: count Tx dropsJakub Kicinski1-0/+2
[ Upstream commit fb9f7190092d2bbd1f8f0b1cc252732cbe99a87e ] Drivers should count packets they are dropping. Fixes: c0c050c58d84 ("bnxt_en: New Broadcom ethernet driver.") Reviewed-by: Michael Chan <michael.chan@broadcom.com> Reviewed-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-08-26bnxt: make sure xmit_more + errors does not miss doorbellsJakub Kicinski2-13/+27
[ Upstream commit e8d8c5d80f5e9d4586c68061b62c642752289095 ] skbs are freed on error and not put on the ring. We may, however, be in a situation where we're freeing the last skb of a batch, and there is a doorbell ring pending because of xmit_more() being true earlier. Make sure we ring the door bell in such situations. Since errors are rare don't pay attention to xmit_more() and just always flush the pending frames. The busy case should be safe to be left alone because it can only happen if start_xmit races with completions and they both enable the queue. In that case the kick can't be pending. Noticed while reading the code. Fixes: 4d172f21cefe ("bnxt_en: Implement xmit_more.") Reviewed-by: Michael Chan <michael.chan@broadcom.com> Reviewed-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-08-26bnxt: disable napi before canceling DIMJakub Kicinski1-2/+1
[ Upstream commit 01cca6b9330ac7460de44eeeb3a0607f8aae69ff ] napi schedules DIM, napi has to be disabled first, then DIM canceled. Noticed while reading the code. Fixes: 0bc0b97fca73 ("bnxt_en: cleanup DIM work on device shutdown") Fixes: 6a8788f25625 ("bnxt_en: add support for software dynamic interrupt moderation") Reviewed-by: Michael Chan <michael.chan@broadcom.com> Reviewed-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-08-26bnxt: don't lock the tx queue from napi pollJakub Kicinski1-22/+32
[ Upstream commit 3c603136c9f82833813af77185618de5af67676c ] We can't take the tx lock from the napi poll routine, because netpoll can poll napi at any moment, including with the tx lock already held. The tx lock is protecting against two paths - the disable path, and (as Michael points out) the NETDEV_TX_BUSY case which may occur if NAPI completions race with start_xmit and both decide to re-enable the queue. For the disable/ifdown path use synchronize_net() to make sure closing the device does not race we restarting the queues. Annotate accesses to dev_state against data races. For the NAPI cleanup vs start_xmit path - appropriate barriers are already in place in the main spot where Tx queue is stopped but we need to do the same careful dance in the TX_BUSY case. Fixes: c0c050c58d84 ("bnxt_en: New Broadcom ethernet driver.") Reviewed-by: Michael Chan <michael.chan@broadcom.com> Reviewed-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-08-26qede: fix crash in rmmod qede while automatic debug collectionPrabhakar Kushwaha2-0/+9
[ Upstream commit 1159e25c137422bdc48ee96e3fb014bd942092c6 ] A crash has been observed if rmmod is done while automatic debug collection in progress. It is due to a race condition between both of them. To fix stop the sp_task during unload to avoid running qede_sp_task even if they are schedule during removal process. Signed-off-by: Alok Prasad <palok@marvell.com> Signed-off-by: Shai Malin <smalin@marvell.com> Signed-off-by: Ariel Elior <aelior@marvell.com> Signed-off-by: Prabhakar Kushwaha <pkushwaha@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-08-18net/mlx5: Fix return value from tracer initializationAya Levin1-2/+9
[ Upstream commit bd37c2888ccaa5ceb9895718f6909b247cc372e0 ] Check return value of mlx5_fw_tracer_start(), set error path and fix return value of mlx5_fw_tracer_init() accordingly. Fixes: c71ad41ccb0c ("net/mlx5: FW tracer, events handling") Signed-off-by: Aya Levin <ayal@nvidia.com> Reviewed-by: Moshe Shemesh <moshe@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-08-18net/mlx5: Synchronize correct IRQ when destroying CQShay Drory6-21/+23
[ Upstream commit 563476ae0c5e48a028cbfa38fa9d2fc0418eb88f ] The CQ destroy is performed based on the IRQ number that is stored in cq->irqn. That number wasn't set explicitly during CQ creation and as expected some of the API users of mlx5_core_create_cq() forgot to update it. This caused to wrong synchronization call of the wrong IRQ with a number 0 instead of the real one. As a fix, set the IRQ number directly in the mlx5_core_create_cq() and update all users accordingly. Fixes: 1a86b377aa21 ("vdpa/mlx5: Add VDPA driver for supported mlx5 devices") Fixes: ef1659ade359 ("IB/mlx5: Add DEVX support for CQ events") Signed-off-by: Shay Drory <shayd@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-08-18net/mlx5e: TC, Fix error handling memory leakChris Mi1-0/+1
[ Upstream commit 88bbd7b2369aca4598eb8f38c5f16be98c3bb5d4 ] Free the offload sample action on error. Fixes: f94d6389f6a8 ("net/mlx5e: TC, Add support to offload sample action") Signed-off-by: Chris Mi <cmi@nvidia.com> Reviewed-by: Oz Shlomo <ozsh@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-08-18net/mlx5: Block switchdev mode while devlink traps are activeAya Levin1-3/+11
[ Upstream commit c85a6b8feb16c0cdbbc8d9f581c7861c4a9ac351 ] Since switchdev mode can't support devlink traps, verify there are no active devlink traps before moving eswitch to switchdev mode. If there are active traps, prevent the switchdev mode configuration. Fixes: eb3862a0525d ("net/mlx5e: Enable traps according to link state") Signed-off-by: Aya Levin <ayal@nvidia.com> Reviewed-by: Moshe Shemesh <moshe@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-08-18net/mlx5e: Destroy page pool after XDP SQ to fix use-after-freeMaxim Mikityanskiy1-10/+10
[ Upstream commit 8ba3e4c85825c8801a2c298dcadac650a40d7137 ] mlx5e_close_xdpsq does the cleanup: it calls mlx5e_free_xdpsq_descs to free the outstanding descriptors, which relies on mlx5e_page_release_dynamic and page_pool_release_page. However, page_pool_destroy is already called by this point, because mlx5e_close_rq runs before mlx5e_close_xdpsq. This commit fixes the use-after-free by swapping mlx5e_close_xdpsq and mlx5e_close_rq. The commit cited below started calling page_pool_destroy directly from the driver. Previously, the page pool was destroyed under a call_rcu from xdp_rxq_info_unreg_mem_model, which would defer the deallocation until after the XDPSQ is cleaned up. Fixes: 1da4bbeffe41 ("net: core: page_pool: add user refcnt and reintroduce page_pool_destroy") Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-08-18net/mlx5e: Avoid creating tunnel headers for local routeRoi Dayan1-0/+5
[ Upstream commit c623c95afa56bf4bf64e4f58742dc94616ef83db ] It could be local and remote are on the same machine and the route result will be a local route which will result in creating encap id with src/dst mac address of 0. Fixes: a54e20b4fcae ("net/mlx5e: Add basic TC tunnel set action for SRIOV offloads") Signed-off-by: Roi Dayan <roid@nvidia.com> Reviewed-by: Maor Dickman <maord@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-08-18net/mlx5: DR, Add fail on error check on decapAlex Vesker1-0/+2
[ Upstream commit d3875924dae632d5edd908d285fffc5f07c835a3 ] While processing encapsulated packet on RX, one of the fields that is checked is the inner packet length. If the length as specified in the header doesn't match the actual inner packet length, the packet is invalid and should be dropped. However, such packet caused the NIC to hang. This patch turns on a 'fail_on_error' HW bit which allows HW to drop such an invalid packet while processing RX packet and trying to decap it. Fixes: ad17dc8cf910 ("net/mlx5: DR, Move STEv0 action apply logic") Signed-off-by: Alex Vesker <valex@nvidia.com> Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-08-18net/mlx5: Don't skip subfunction cleanup in case of error in module initLeon Romanovsky2-8/+9
[ Upstream commit c633e799641cf13960bd83189b4d5b1b2adb0d4e ] Clean SF resources if mlx5 eth failed to initialize. Fixes: 1958fc2f0712 ("net/mlx5: SF, Add auxiliary device driver") Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Reviewed-by: Parav Pandit <parav@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-08-18iavf: Set RSS LUT and key in reset handle pathMd Fahad Iqbal Polash1-5/+8
[ Upstream commit a7550f8b1c9712894f9e98d6caf5f49451ebd058 ] iavf driver should set RSS LUT and key unconditionally in reset path. Currently, the driver does not do that. This patch fixes this issue. Fixes: 2c86ac3c7079 ("i40evf: create a generic config RSS function") Signed-off-by: Md Fahad Iqbal Polash <md.fahad.iqbal.polash@intel.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-17 10:19:29 +0300