summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet
AgeCommit message (Collapse)AuthorFilesLines
2021-12-26net: stmmac: use GFP_DMA32Matteo Croce1-4/+8
Signed-off-by: Matteo Croce <mcroce@microsoft.com>
2021-12-26net: stmmac: Configure gtxclk based on speedTom1-0/+47
2021-12-22net: systemport: Add global locking for descriptor lifecycleFlorian Fainelli2-1/+5
[ Upstream commit 8b8e6e782456f1ce02a7ae914bbd5b1053f0b034 ] The descriptor list is a shared resource across all of the transmit queues, and the locking mechanism used today only protects concurrency across a given transmit queue between the transmit and reclaiming. This creates an opportunity for the SYSTEMPORT hardware to work on corrupted descriptors if we have multiple producers at once which is the case when using multiple transmit queues. This was particularly noticeable when using multiple flows/transmit queues and it showed up in interesting ways in that UDP packets would get a correct UDP header checksum being calculated over an incorrect packet length. Similarly TCP packets would get an equally correct checksum computed by the hardware over an incorrect packet length. The SYSTEMPORT hardware maintains an internal descriptor list that it re-arranges when the driver produces a new descriptor anytime it writes to the WRITE_PORT_{HI,LO} registers, there is however some delay in the hardware to re-organize its descriptors and it is possible that concurrent TX queues eventually break this internal allocation scheme to the point where the length/status part of the descriptor gets used for an incorrect data buffer. The fix is to impose a global serialization for all TX queues in the short section where we are writing to the WRITE_PORT_{HI,LO} registers which solves the corruption even with multiple concurrent TX queues being used. Fixes: 80105befdb4b ("net: systemport: add Broadcom SYSTEMPORT Ethernet MAC driver") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20211215202450.4086240-1-f.fainelli@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-22sfc_ef100: potential dereference of null pointerJiasheng Jiang1-0/+3
[ Upstream commit 407ecd1bd726f240123f704620d46e285ff30dd9 ] The return value of kmalloc() needs to be checked. To avoid use in efx_nic_update_stats() in case of the failure of alloc. Fixes: b593b6f1b492 ("sfc_ef100: statistics gathering") Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn> Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-22net: stmmac: dwmac-rk: fix oob read in rk_gmac_setupJohn Keeping1-1/+3
[ Upstream commit 0546b224cc7717cc8a2db076b0bb069a9c430794 ] KASAN reports an out-of-bounds read in rk_gmac_setup on the line: while (ops->regs[i]) { This happens for most platforms since the regs flexible array member is empty, so the memory after the ops structure is being read here. It seems that mostly this happens to contain zero anyway, so we get lucky and everything still works. To avoid adding redundant data to nearly all the ops structures, add a new flag to indicate whether the regs field is valid and avoid this loop when it is not. Fixes: 3bb3d6b1c195 ("net: stmmac: Add RK3566/RK3568 SoC support") Signed-off-by: John Keeping <john@metanate.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-22ixgbe: set X550 MDIO speed before talking to PHYCyril Novikov1-0/+3
[ Upstream commit bf0a375055bd1afbbf02a0ef45f7655da7b71317 ] The MDIO bus speed must be initialized before talking to the PHY the first time in order to avoid talking to it using a speed that the PHY doesn't support. This fixes HW initialization error -17 (IXGBE_ERR_PHY_ADDR_INVALID) on Denverton CPUs (a.k.a. the Atom C3000 family) on ports with a 10Gb network plugged in. On those devices, HLREG0[MDCSPD] resets to 1, which combined with the 10Gb network results in a 24MHz MDIO speed, which is apparently too fast for the connected PHY. PHY register reads over MDIO bus return garbage, leading to initialization failure. Reproduced with Linux kernel 4.19 and 5.15-rc7. Can be reproduced using the following setup: * Use an Atom C3000 family system with at least one X552 LAN on the SoC * Disable PXE or other BIOS network initialization if possible (the interface must not be initialized before Linux boots) * Connect a live 10Gb Ethernet cable to an X550 port * Power cycle (not reset, doesn't always work) the system and boot Linux * Observe: ixgbe interfaces w/ 10GbE cables plugged in fail with error -17 Fixes: e84db7272798 ("ixgbe: Introduce function to control MDIO speed") Signed-off-by: Cyril Novikov <cnovikov@lynx.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-22ixgbe: Document how to enable NBASE-T supportRobert Schlabbach1-0/+4
[ Upstream commit 271225fd57c2f1e0b3f8826df51be6c634affefe ] Commit a296d665eae1 ("ixgbe: Add ethtool support to enable 2.5 and 5.0 Gbps support") introduced suppression of the advertisement of NBASE-T speeds by default, according to Todd Fujinaka to accommodate customers with network switches which could not cope with advertised NBASE-T speeds, as posted in the E1000-devel mailing list: https://sourceforge.net/p/e1000/mailman/message/37106269/ However, the suppression was not documented at all, nor was how to enable NBASE-T support. Properly document the NBASE-T suppression and how to enable NBASE-T support. Fixes: a296d665eae1 ("ixgbe: Add ethtool support to enable 2.5 and 5.0 Gbps support") Reported-by: Robert Schlabbach <robert_s@gmx.net> Signed-off-by: Robert Schlabbach <robert_s@gmx.net> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-22igc: Fix typo in i225 LTR functionsSasha Neftin1-1/+1
[ Upstream commit 0182d1f3fa640888a2ed7e3f6df2fdb10adee7c8 ] The LTR maximum value was incorrectly written using the scale from the LTR minimum value. This would cause incorrect values to be sent, in cases where the initial calculation lead to different min/max scales. Fixes: 707abf069548 ("igc: Add initial LTR support") Suggested-by: Dima Ruinskiy <dima.ruinskiy@intel.com> Signed-off-by: Sasha Neftin <sasha.neftin@intel.com> Tested-by: Nechama Kraus <nechamax.kraus@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-22igbvf: fix double free in `igbvf_probe`Letu Ren1-0/+1
[ Upstream commit b6d335a60dc624c0d279333b22c737faa765b028 ] In `igbvf_probe`, if register_netdev() fails, the program will go to label err_hw_init, and then to label err_ioremap. In free_netdev() which is just below label err_ioremap, there is `list_for_each_entry_safe` and `netif_napi_del` which aims to delete all entries in `dev->napi_list`. The program has added an entry `adapter->rx_ring->napi` which is added by `netif_napi_add` in igbvf_alloc_queues(). However, adapter->rx_ring has been freed below label err_hw_init. So this a UAF. In terms of how to patch the problem, we can refer to igbvf_remove() and delete the entry before `adapter->rx_ring`. The KASAN logs are as follows: [ 35.126075] BUG: KASAN: use-after-free in free_netdev+0x1fd/0x450 [ 35.127170] Read of size 8 at addr ffff88810126d990 by task modprobe/366 [ 35.128360] [ 35.128643] CPU: 1 PID: 366 Comm: modprobe Not tainted 5.15.0-rc2+ #14 [ 35.129789] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014 [ 35.131749] Call Trace: [ 35.132199] dump_stack_lvl+0x59/0x7b [ 35.132865] print_address_description+0x7c/0x3b0 [ 35.133707] ? free_netdev+0x1fd/0x450 [ 35.134378] __kasan_report+0x160/0x1c0 [ 35.135063] ? free_netdev+0x1fd/0x450 [ 35.135738] kasan_report+0x4b/0x70 [ 35.136367] free_netdev+0x1fd/0x450 [ 35.137006] igbvf_probe+0x121d/0x1a10 [igbvf] [ 35.137808] ? igbvf_vlan_rx_add_vid+0x100/0x100 [igbvf] [ 35.138751] local_pci_probe+0x13c/0x1f0 [ 35.139461] pci_device_probe+0x37e/0x6c0 [ 35.165526] [ 35.165806] Allocated by task 366: [ 35.166414] ____kasan_kmalloc+0xc4/0xf0 [ 35.167117] foo_kmem_cache_alloc_trace+0x3c/0x50 [igbvf] [ 35.168078] igbvf_probe+0x9c5/0x1a10 [igbvf] [ 35.168866] local_pci_probe+0x13c/0x1f0 [ 35.169565] pci_device_probe+0x37e/0x6c0 [ 35.179713] [ 35.179993] Freed by task 366: [ 35.180539] kasan_set_track+0x4c/0x80 [ 35.181211] kasan_set_free_info+0x1f/0x40 [ 35.181942] ____kasan_slab_free+0x103/0x140 [ 35.182703] kfree+0xe3/0x250 [ 35.183239] igbvf_probe+0x1173/0x1a10 [igbvf] [ 35.184040] local_pci_probe+0x13c/0x1f0 Fixes: d4e0fe01a38a0 (igbvf: add new driver to support 82576 virtual functions) Reported-by: Zheyu Ma <zheyuma97@gmail.com> Signed-off-by: Letu Ren <fantasquex@gmail.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-22igb: Fix removal of unicast MAC filters of VFsKaren Sornek1-14/+14
[ Upstream commit 584af82154f56e6b2740160fcc84a2966d969e15 ] Move checking condition of VF MAC filter before clearing or adding MAC filter to VF to prevent potential blackout caused by removal of necessary and working VF's MAC filter. Fixes: 1b8b062a99dc ("igb: add VF trust infrastructure") Signed-off-by: Karen Sornek <karen.sornek@intel.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-22ice: Don't put stale timestamps in the skbKarol Kolacinski2-7/+10
[ Upstream commit 37e738b6fdb14529534dca441e0222313688fde3 ] The driver has to check if it does not accidentally put the timestamp in the SKB before previous timestamp gets overwritten. Timestamp values in the PHY are read only and do not get cleared except at hardware reset or when a new timestamp value is captured. The cached_tstamp field is used to detect the case where a new timestamp has not yet been captured, ensuring that we avoid sending stale timestamp data to the stack. Fixes: ea9b847cda64 ("ice: enable transmit timestamps for E810 devices") Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-22ice: Use div64_u64 instead of div_u64 in adjfineKarol Kolacinski1-1/+1
[ Upstream commit 0013881c1145d36bf26165bb70fdd7560a5507a3 ] Change the division in ice_ptp_adjfine from div_u64 to div64_u64. div_u64 is used when the divisor is 32 bit but in this case incval is 64 bit and it caused incorrect calculations and incval adjustments. Fixes: 06c16d89d2cb ("ice: register 1588 PTP clock device object for E810 devices") Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-22net: stmmac: fix tc flower deletion for VLAN priority Rx steeringOng Boon Leong2-13/+90
[ Upstream commit aeb7c75cb77478fdbf821628e9c95c4baa9adc63 ] To replicate the issue:- 1) Add 1 flower filter for VLAN Priority based frame steering:- $ IFDEVNAME=eth0 $ tc qdisc add dev $IFDEVNAME ingress $ tc qdisc add dev $IFDEVNAME root mqprio num_tc 8 \ map 0 1 2 3 4 5 6 7 0 0 0 0 0 0 0 0 \ queues 1@0 1@1 1@2 1@3 1@4 1@5 1@6 1@7 hw 0 $ tc filter add dev $IFDEVNAME parent ffff: protocol 802.1Q \ flower vlan_prio 0 hw_tc 0 2) Get the 'pref' id $ tc filter show dev $IFDEVNAME ingress 3) Delete a specific tc flower record (say pref 49151) $ tc filter del dev $IFDEVNAME parent ffff: pref 49151 From dmesg, we will observe kernel NULL pointer ooops [ 197.170464] BUG: kernel NULL pointer dereference, address: 0000000000000000 [ 197.171367] #PF: supervisor read access in kernel mode [ 197.171367] #PF: error_code(0x0000) - not-present page [ 197.171367] PGD 0 P4D 0 [ 197.171367] Oops: 0000 [#1] PREEMPT SMP NOPTI <snip> [ 197.171367] RIP: 0010:tc_setup_cls+0x20b/0x4a0 [stmmac] <snip> [ 197.171367] Call Trace: [ 197.171367] <TASK> [ 197.171367] ? __stmmac_disable_all_queues+0xa8/0xe0 [stmmac] [ 197.171367] stmmac_setup_tc_block_cb+0x70/0x110 [stmmac] [ 197.171367] tc_setup_cb_destroy+0xb3/0x180 [ 197.171367] fl_hw_destroy_filter+0x94/0xc0 [cls_flower] The above issue is due to previous incorrect implementation of tc_del_vlan_flow(), shown below, that uses flow_cls_offload_flow_rule() to get struct flow_rule *rule which is no longer valid for tc filter delete operation. struct flow_rule *rule = flow_cls_offload_flow_rule(cls); struct flow_dissector *dissector = rule->match.dissector; So, to ensure tc_del_vlan_flow() deletes the right VLAN cls record for earlier configured RX queue (configured by hw_tc) in tc_add_vlan_flow(), this patch introduces stmmac_rfs_entry as driver-side flow_cls_offload record for 'RX frame steering' tc flower, currently used for VLAN priority. The implementation has taken consideration for future extension to include other type RX frame steering such as EtherType based. v2: - Clean up overly extensive backtrace and rewrite git message to better explain the kernel NULL pointer issue. Fixes: 0e039f5cf86c ("net: stmmac: add RX frame steering based on VLAN priority in tc flower") Tested-by: Kurt Kanzenbach <kurt@linutronix.de> Signed-off-by: Ong Boon Leong <boon.leong.ong@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-22net: hns3: fix race condition in debugfsYufeng Mo2-6/+16
[ Upstream commit 6dde452bceca3f2ed2b33bc46a16ff5682a03a2e ] When multiple threads concurrently access the debugfs content, data and pointer exceptions may occur. Therefore, mutex lock protection is added for debugfs. Fixes: 5e69ea7ee2a6 ("net: hns3: refactor the debugfs process") Signed-off-by: Yufeng Mo <moyufeng@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-22net: hns3: fix use-after-free bug in hclgevf_send_mbx_msgJie Wang1-1/+2
[ Upstream commit 27cbf64a766e86f068ce6214f04c00ceb4db1af4 ] Currently, the hns3_remove function firstly uninstall client instance, and then uninstall acceletion engine device. The netdevice is freed in client instance uninstall process, but acceletion engine device uninstall process still use it to trace runtime information. This causes a use after free problem. So fixes it by check the instance register state to avoid use after free. Fixes: d8355240cf8f ("net: hns3: add trace event support for PF/VF mailbox") Signed-off-by: Jie Wang <wangjie125@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-17net/mlx4_en: Update reported link modes for 1/10GErik Ekman1-3/+3
[ Upstream commit 2191b1dfef7d45f44b5008d2148676d9f2c82874 ] When link modes were initially added in commit 2c762679435dc ("net/mlx4_en: Use PTYS register to query ethtool settings") and later updated for the new ethtool API in commit 3d8f7cc78d0eb ("net: mlx4: use new ETHTOOL_G/SSETTINGS API") the only 1/10G non-baseT link modes configured were 1000baseKX, 10000baseKX4 and 10000baseKR. It looks like these got picked to represent other modes since nothing better was available. Switch to using more specific link modes added in commit 5711a98221443 ("net: ethtool: add support for 1000BaseX and missing 10G link modes"). Tested with MCX311A-XCAT connected via DAC. Before: % sudo ethtool enp3s0 Settings for enp3s0: Supported ports: [ FIBRE ] Supported link modes: 1000baseKX/Full 10000baseKR/Full Supported pause frame use: Symmetric Receive-only Supports auto-negotiation: No Supported FEC modes: Not reported Advertised link modes: 1000baseKX/Full 10000baseKR/Full Advertised pause frame use: Symmetric Advertised auto-negotiation: No Advertised FEC modes: Not reported Speed: 10000Mb/s Duplex: Full Auto-negotiation: off Port: Direct Attach Copper PHYAD: 0 Transceiver: internal Supports Wake-on: d Wake-on: d Current message level: 0x00000014 (20) link ifdown Link detected: yes With this change: % sudo ethtool enp3s0 Settings for enp3s0: Supported ports: [ FIBRE ] Supported link modes: 1000baseX/Full 10000baseCR/Full 10000baseSR/Full Supported pause frame use: Symmetric Receive-only Supports auto-negotiation: No Supported FEC modes: Not reported Advertised link modes: 1000baseX/Full 10000baseCR/Full 10000baseSR/Full Advertised pause frame use: Symmetric Advertised auto-negotiation: No Advertised FEC modes: Not reported Speed: 10000Mb/s Duplex: Full Auto-negotiation: off Port: Direct Attach Copper PHYAD: 0 Transceiver: internal Supports Wake-on: d Wake-on: d Current message level: 0x00000014 (20) link ifdown Link detected: yes Tested-by: Michael Stapelberg <michael@stapelberg.ch> Signed-off-by: Erik Ekman <erik@kryo.se> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-17ice: fix FDIR init missing when reset VFYahui Cao1-0/+2
[ Upstream commit f23ab04dd6f703e282bb2d51fe3ae14f4b88a628 ] When VF is being reset, ice_reset_vf() will be called and FDIR resource should be released and initialized again. Fixes: 1f7ea1cd6a37 ("ice: Enable FDIR Configure for AVF") Signed-off-by: Yahui Cao <yahui.cao@intel.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-14net/qla3xxx: fix an error code in ql_adapter_up()Dan Carpenter1-10/+9
commit d17b9737c2bc09b4ac6caf469826e5a7ce3ffab7 upstream. The ql_wait_for_drvr_lock() fails and returns false, then this function should return an error code instead of returning success. The other problem is that the success path prints an error message netdev_err(ndev, "Releasing driver lock\n"); Delete that and re-order the code a little to make it more clear. Fixes: 5a4faa873782 ("[PATCH] qla3xxx NIC driver") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/20211207082416.GA16110@kili Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-14net: fec: only clear interrupt of handling queue in fec_enet_rx_queue()Joakim Zhang2-1/+4
commit b5bd95d17102b6719e3531d627875b9690371383 upstream. Background: We have a customer is running a Profinet stack on the 8MM which receives and responds PNIO packets every 4ms and PNIO-CM packets every 40ms. However, from time to time the received PNIO-CM package is "stock" and is only handled when receiving a new PNIO-CM or DCERPC-Ping packet (tcpdump shows the PNIO-CM and the DCERPC-Ping packet at the same time but the PNIO-CM HW timestamp is from the expected 40 ms and not the 2s delay of the DCERPC-Ping). After debugging, we noticed PNIO, PNIO-CM and DCERPC-Ping packets would be handled by different RX queues. The root cause should be driver ack all queues' interrupt when handle a specific queue in fec_enet_rx_queue(). The blamed patch is introduced to receive as much packets as possible once to avoid interrupt flooding. But it's unreasonable to clear other queues'interrupt when handling one queue, this patch tries to fix it. Fixes: ed63f1dcd578 (net: fec: clear receive interrupts before processing a packet) Cc: Russell King <rmk+kernel@arm.linux.org.uk> Reported-by: Nicolas Diaz <nicolas.diaz@nxp.com> Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com> Link: https://lore.kernel.org/r/20211206135457.15946-1-qiangqing.zhang@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-14net: altera: set a couple error code in probe()Dan Carpenter1-3/+6
commit badd7857f5c933a3dc34942a2c11d67fdbdc24de upstream. There are two error paths which accidentally return success instead of a negative error code. Fixes: bbd2190ce96d ("Altera TSE: Add main and header file for Altera Ethernet Driver") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-14i40e: Fix NULL pointer dereference in i40e_dbg_dump_descNorbert Zulinski1-0/+8
commit 23ec111bf3549aae37140330c31a16abfc172421 upstream. When trying to dump VFs VSI RX/TX descriptors using debugfs there was a crash due to NULL pointer dereference in i40e_dbg_dump_desc. Added a check to i40e_dbg_dump_desc that checks if VSI type is correct for dumping RX/TX descriptors. Fixes: 02e9c290814c ("i40e: debugfs interface") Signed-off-by: Sylwester Dziedziuch <sylwesterx.dziedziuch@intel.com> Signed-off-by: Norbert Zulinski <norbertx.zulinski@intel.com> Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-14i40e: Fix pre-set max number of queues for VFMateusz Palczewski1-5/+0
commit 8aa55ab422d9d0d825ebfb877702ed661e96e682 upstream. After setting pre-set combined to 16 queues and reserving 16 queues by tc qdisc, pre-set maximum combined queues returned to default value after VF reset being 4 and this generated errors during removing tc. Fixed by removing clear num_req_queues before reset VF. Fixes: e284fc280473 (i40e: Add and delete cloud filter) Signed-off-by: Grzegorz Szczurek <grzegorzx.szczurek@intel.com> Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com> Tested-by: Bindushree P <Bindushree.p@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-14i40e: Fix failed opcode appearing if handling messages from VFKaren Sornek2-22/+50
commit 61125b8be85dfbc7e9c7fe1cc6c6d631ab603516 upstream. Fix failed operation code appearing if handling messages from VF. Implemented by waiting for VF appropriate state if request starts handle while VF reset. Without this patch the message handling request while VF is in a reset state ends with error -5 (I40E_ERR_PARAM). Fixes: 5c3c48ac6bf5 ("i40e: implement virtual device interface") Signed-off-by: Grzegorz Szczurek <grzegorzx.szczurek@intel.com> Signed-off-by: Karen Sornek <karen.sornek@intel.com> Tested-by: Tony Brelinski <tony.brelinski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-14qede: validate non LSO skb lengthManish Chopra1-0/+7
commit 8e227b198a55859bf790dc7f4b1e30c0859c6756 upstream. Although it is unlikely that stack could transmit a non LSO skb with length > MTU, however in some cases or environment such occurrences actually resulted into firmware asserts due to packet length being greater than the max supported by the device (~9700B). This patch adds the safeguard for such odd cases to avoid firmware asserts. v2: Added "Fixes" tag with one of the initial driver commit which enabled the TX traffic actually (as this was probably day1 issue which was discovered recently by some customer environment) Fixes: a2ec6172d29c ("qede: Add support for link") Signed-off-by: Manish Chopra <manishc@marvell.com> Signed-off-by: Alok Prasad <palok@marvell.com> Signed-off-by: Prabhakar Kushwaha <pkushwaha@marvell.com> Signed-off-by: Ariel Elior <aelior@marvell.com> Link: https://lore.kernel.org/r/20211203174413.13090-1-manishc@marvell.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-14net: mvpp2: fix XDP rx queues registeringLouis Amas1-2/+2
commit a50e659b2a1be14784e80f8492aab177e67c53a2 upstream. The registration of XDP queue information is incorrect because the RX queue id we use is invalid. When port->id == 0 it appears to works as expected yet it's no longer the case when port->id != 0. The problem arised while using a recent kernel version on the MACCHIATOBin. This board has several ports: * eth0 and eth1 are 10Gbps interfaces ; both ports has port->id == 0; * eth2 is a 1Gbps interface with port->id != 0. Code from xdp-tutorial (more specifically advanced03-AF_XDP) was used to test packet capture and injection on all these interfaces. The XDP kernel was simplified to: SEC("xdp_sock") int xdp_sock_prog(struct xdp_md *ctx) { int index = ctx->rx_queue_index; /* A set entry here means that the correspnding queue_id * has an active AF_XDP socket bound to it. */ if (bpf_map_lookup_elem(&xsks_map, &index)) return bpf_redirect_map(&xsks_map, index, 0); return XDP_PASS; } Starting the program using: ./af_xdp_user -d DEV Gives the following result: * eth0 : ok * eth1 : ok * eth2 : no capture, no injection Investigating the issue shows that XDP rx queues for eth2 are wrong: XDP expects their id to be in the range [0..3] but we found them to be in the range [32..35]. Trying to force rx queue ids using: ./af_xdp_user -d eth2 -Q 32 fails as expected (we shall not have more than 4 queues). When we register the XDP rx queue information (using xdp_rxq_info_reg() in function mvpp2_rxq_init()) we tell it to use rxq->id as the queue id. This value is computed as: rxq->id = port->id * max_rxq_count + queue_id where max_rxq_count depends on the device version. In the MACCHIATOBin case, this value is 32, meaning that rx queues on eth2 are numbered from 32 to 35 - there are four of them. Clearly, this is not the per-port queue id that XDP is expecting: it wants a value in the range [0..3]. It shall directly use queue_id which is stored in rxq->logic_rxq -- so let's use that value instead. rxq->id is left untouched ; its value is indeed valid but it should not be used in this context. This is consistent with the remaining part of the code in mvpp2_rxq_init(). With this change, packet capture is working as expected on all the MACCHIATOBin ports. Fixes: b27db2274ba8 ("mvpp2: use page_pool allocator") Signed-off-by: Louis Amas <louis.amas@eho.link> Signed-off-by: Emmanuel Deloget <emmanuel.deloget@eho.link> Reviewed-by: Marcin Wojtas <mw@semihalf.com> Acked-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Jesper Dangaard Brouer <brouer@redhat.com> Link: https://lore.kernel.org/r/20211207143423.916334-1-louis.amas@eho.link Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-14net: bcm4908: Handle dma_set_coherent_mask error codesJiasheng Jiang1-1/+3
commit 128f6ec95a282b2d8bc1041e59bf65810703fa44 upstream. The return value of dma_set_coherent_mask() is not always 0. To catch the exception in case that dma is not support the mask. Fixes: 9d61d138ab30 ("net: broadcom: rename BCM4908 driver & update DT binding") Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-14iavf: Fix reporting when setting descriptor countMichal Maloszewski1-11/+32
commit 1a1aa356ddf3f16539f5962c01c5f702686dfc15 upstream. iavf_set_ringparams doesn't communicate to the user that 1. The user requested descriptor count is out of range. Instead it just quietly sets descriptors to the "clamped" value and calls it done. This makes it look an invalid value was successfully set as the descriptor count when this isn't actually true. 2. The user provided descriptor count needs to be inflated for alignment reasons. This behavior is confusing. The ice driver has already addressed this by rejecting invalid values for descriptor count and messaging for alignment adjustments. Do the same thing here by adding the error and info messages. Fixes: fbb7ddfef253 ("i40evf: core ethtool functionality") Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Signed-off-by: Michal Maloszewski <michal.maloszewski@intel.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-14iavf: restore MSI state on resetMitch Williams1-0/+1
commit 7e4dcc13965c57869684d57a1dc6dd7be589488c upstream. If the PF experiences an FLR, the VF's MSI and MSI-X configuration will be conveniently and silently removed in the process. When this happens, reset recovery will appear to complete normally but no traffic will pass. The netdev watchdog will helpfully notify everyone of this issue. To prevent such public embarrassment, restore MSI configuration at every reset. For normal resets, this will do no harm, but for VF resets resulting from a PF FLR, this will keep the VF working. Fixes: 5eae00c57f5e ("i40evf: main driver core") Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: George Kuruvinakunnel <george.kuruvinakunnel@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-14nfp: Fix memory leak in nfp_cpp_area_cache_add()Jianglei Nie1-1/+3
commit c56c96303e9289cc34716b1179597b6f470833de upstream. In line 800 (#1), nfp_cpp_area_alloc() allocates and initializes a CPP area structure. But in line 807 (#2), when the cache is allocated failed, this CPP area structure is not freed, which will result in memory leak. We can fix it by freeing the CPP area when the cache is allocated failed (#2). 792 int nfp_cpp_area_cache_add(struct nfp_cpp *cpp, size_t size) 793 { 794 struct nfp_cpp_area_cache *cache; 795 struct nfp_cpp_area *area; 800 area = nfp_cpp_area_alloc(cpp, NFP_CPP_ID(7, NFP_CPP_ACTION_RW, 0), 801 0, size); // #1: allocates and initializes 802 if (!area) 803 return -ENOMEM; 805 cache = kzalloc(sizeof(*cache), GFP_KERNEL); 806 if (!cache) 807 return -ENOMEM; // #2: missing free 817 return 0; 818 } Fixes: 4cb584e0ee7d ("nfp: add CPP access core") Signed-off-by: Jianglei Nie <niejianglei2021@163.com> Acked-by: Simon Horman <simon.horman@corigine.com> Link: https://lore.kernel.org/r/20211209061511.122535-1-niejianglei2021@163.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-14ice: ignore dropped packets during initJesse Brandeburg1-0/+3
commit 28dc1b86f8ea9fd6f4c9e0b363db73ecabf84e22 upstream. If the hardware is constantly receiving unicast or broadcast packets during driver load, the device previously counted many GLV_RDPC (VSI dropped packets) events during init. This causes confusing dropped packet statistics during driver load. The dropped packets counter incrementing does stop once the driver finishes loading. Avoid this problem by baselining our statistics at the end of driver open instead of the end of probe. Fixes: cdedef59deb0 ("ice: Configure VSIs for Tx/Rx") Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Gurucharan G <gurucharanx.g@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-08net/mlx5e: Sync TIR params updates against concurrent create/modifyTariq Toukan3-27/+44
[ Upstream commit 4cce2ccf08fbc27ae34ce0e72db15166e7b5f6a7 ] Transport Interface Receive (TIR) objects perform the packet processing and reassembly and is also responsible for demultiplexing the packets into the different RQs. There are certain TIR context attributes that propagate to the pointed RQs and applied to them (like packet_merge offloads (LRO/SHAMPO) and tunneled_offload_en). When TIRs do not agree on attributes values, a "last one wins" policy is applied. Hence, if not synced properly, a race between TIR params update and a concurrent TIR create/modify operation might yield to a mismatch between the shadow parameters in SW and the actual applied state of the RQs in HW. tunneled_offload_en is a fixed attribute per profile, while packet merge offload state might be toggled and get out-of-sync. When this happens, packet_merge offload might be working although not requested, or the opposite. All updates to packet_merge state and all create/modify operations of regular redirection/steering TIRs are done under the same priv->state_lock, so they do not run in parallel, and no race is possible. However, there are other kind of TIRs (acceleration offloads TIRs, like TLS TIRs) which are created on demand for each new connection without holding the coarse priv->state_lock, hence might race. Fix this by synchronizing all packet_merge state reads and writes against all TIR create/modify operations. Include the modify operations of the regular redirection steering TIRs under the new lock, for better code layering and division of responsibilities. Fixes: 1182f3659357 ("net/mlx5e: kTLS, Add kTLS RX HW offload support") Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Moshe Shemesh <moshe@nvidia.com> Reviewed-by: Maxim Mikityanskiy <maximmi@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-08net/mlx5e: Rename TIR lro functions to TIR packet merge functionsKhalid Manaa14-91/+94
[ Upstream commit eaee12f046924eeb1210c7e4f3b326603ff1bd85 ] This series introduces new packet merge type, therefore rename lro functions to packet merge to support the new merge type: - Generalize + rename mlx5e_build_tir_ctx_lro to mlx5e_build_tir_ctx_packet_merge. - Rename mlx5e_modify_tirs_lro to mlx5e_modify_tirs_packet_merge. - Rename lro bit in mlx5_ifc_modify_tir_bitmask_bits to packet_merge. - Rename lro_en in mlx5e_params to packet_merge_type type and combine packet_merge params into one struct mlx5e_packet_merge_param. Signed-off-by: Khalid Manaa <khalidm@nvidia.com> Signed-off-by: Ben Ben-Ishay <benishay@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-08net/mlx5e: Rename lro_timeout to packet_merge_timeoutBen Ben-Ishay4-6/+6
[ Upstream commit 50f477fe9933193e960785f1192be801d7cd307a ] TIR stands for transport interface receive, the TIR object is responsible for performing all transport related operations on the receive side like packet processing, demultiplexing the packets to different RQ's, etc. lro_timeout is a field in the TIR that is used to set the timeout for lro session, this series introduces new packet merge type, therefore rename lro_timeout to packet_merge_timeout for all packet merge types. Signed-off-by: Ben Ben-Ishay <benishay@nvidia.com> Reviewed-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-08net/mlx5: E-Switch, Check group pointer before reading bw_share valueDmytro Linkin1-1/+1
[ Upstream commit 5c4e8ae7aa4875041102406801ee434e6c581aef ] If log_esw_max_sched_depth is not supported group pointer of the vport is NULL. Hence, check the pointer before reading bw_share value. Fixes: 0fe132eac38c ("net/mlx5: E-switch, Allow to add vports to rate groups") Signed-off-by: Dmytro Linkin <dlinkin@nvidia.com> Reviewed-by: Roi Dayan <roid@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-08net/mlx5: E-Switch, fix single FDB creation on BlueFieldMark Bloch1-0/+1
[ Upstream commit 43a0696f11567278b9412f947e43dd7906c831a8 ] Always use MLX5_FLOW_TABLE_OTHER_VPORT flag when creating egress ACL table for single FDB. Not doing so on BlueField will make firmware fail the command. On BlueField the E-Switch manager is the ECPF (vport 0xFFFE) which is filled in the flow table creation command but as the other_vport field wasn't set the firmware complains about a bad parameter. This is different from a regular HCA where the E-Switch manager vport is the PF (vport 0x0). Passing MLX5_FLOW_TABLE_OTHER_VPORT will make the firmware happy both on BlueField and on regular HCAs without special condition for each. This fixes the bellow firmware syndrome: mlx5_cmd_check:819:(pid 571): CREATE_FLOW_TABLE(0x930) op_mod(0x0) failed, status bad parameter(0x3), syndrome (0x754a4) Fixes: db202995f503 ("net/mlx5: E-Switch, add logic to enable shared FDB") Signed-off-by: Mark Bloch <mbloch@nvidia.com> Reviewed-by: Maor Gottlieb <maorg@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-08net/mlx5: E-switch, Respect BW share of the new groupDmytro Linkin1-1/+1
[ Upstream commit 1e59b32e45e47c8ea5455182286ba010bfa87813 ] To enable transmit schduler on vport FW require non-zero configuration for vport's TSAR. If vport added to the group which has configured BW share value and TX rate values of the vport are zero, then scheduler wouldn't be enabled on this vport. Fix that by calling BW normalization if BW share of the new group is configured. Fixes: 0fe132eac38c ("net/mlx5: E-switch, Allow to add vports to rate groups") Signed-off-by: Dmytro Linkin <dlinkin@nvidia.com> Reviewed-by: Roi Dayan <roid@nvidia.com> Reviewed-by: Parav Pandit <parav@nvidia.com> Reviewed-by: Mark Bloch <mbloch@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-08net/mlx5: Move MODIFY_RQT command to ignore list in internal error stateMoshe Shemesh1-1/+1
[ Upstream commit e45c0b34493c24eeeebf89f63a5293aac7728ed7 ] When the device is in internal error state, command interface isn't accessible and the driver decides which commands to fail and which to ignore. Move the MODIFY_RQT command to the ignore list in order to avoid the following redundant warning messages in internal error state: mlx5_core 0000:82:00.1: mlx5e_rss_disable:419:(pid 23754): Failed to redirect RQT 0x0 to drop RQ 0xc00848: err = -5 mlx5_core 0000:82:00.1: mlx5e_rx_res_channels_deactivate:598:(pid 23754): Failed to redirect direct RQT 0x1 to drop RQ 0xc00848 (channel 0): err = -5 mlx5_core 0000:82:00.1: mlx5e_rx_res_channels_deactivate:607:(pid 23754): Failed to redirect XSK RQT 0x19 to drop RQ 0xc00848 (channel 0): err = -5 Fixes: 43ec0f41fa73 ("net/mlx5e: Hide all implementation details of mlx5e_rx_res") Signed-off-by: Moshe Shemesh <moshe@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-08net/mlx5e: Fix missing IPsec statistics on uplink representorRaed Salem1-0/+4
[ Upstream commit 51ebf5db67f5c6aed79c05f1aa5137bdf5ca6614 ] The cited patch added the IPsec support to uplink representor, however as uplink representors have his private statistics where IPsec stats is not part of it, that effectively makes IPsec stats hidden when uplink representor stats queried. Resolve by adding IPsec stats to uplink representor private statistics. Fixes: 5589b8f1a2c7 ("net/mlx5e: Add IPsec support to uplink representor") Signed-off-by: Raed Salem <raeds@nvidia.com> Reviewed-by: Alaa Hleihel <alaa@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2021-12-08atlantic: Remove warn trace message.Sameer Saurabh1-3/+0
commit 060a0fb721ec5bbe02ae322e434ec87dc25ed6e9 upstream. Remove the warn trace message - it's not a correct check here, because the function can still be called on the device in DOWN state Fixes: 508f2e3dce454 ("net: atlantic: split rx and tx per-queue stats") Signed-off-by: Sameer Saurabh <ssaurabh@marvell.com> Signed-off-by: Sudarsana Reddy Kalluru <skalluru@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-08atlantic: Fix statistics logic for production hardwareDmitry Bogdanov5-27/+139
commit 2087ced0fc3a6d45203925750a2b1bcd5402e639 upstream. B0 is the main and widespread device revision of atlantic2 HW. In the current state, driver will incorrectly fetch the statistics for this revision. Fixes: 5cfd54d7dc186 ("net: atlantic: minimal A2 fw_ops") Signed-off-by: Dmitry Bogdanov <dbezrukov@marvell.com> Signed-off-by: Sudarsana Reddy Kalluru <skalluru@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-08Remove Half duplex mode speed capabilities.Sameer Saurabh1-4/+1
commit 03fa512189eb9b55ded5f3e81ad638315555b340 upstream. Since Half Duplex mode has been deprecated by the firmware, driver should not advertise Half Duplex speed in ethtool support link speed values. Fixes: 071a02046c262 ("net: atlantic: A2: half duplex support") Signed-off-by: Sameer Saurabh <ssaurabh@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: Sudarsana Reddy Kalluru <skalluru@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-08atlantic: Add missing DIDs and fix 115c.Nikita Danilov4-1/+27
commit 413d5e09caa5a11da9c7d72401ba0588466a04c0 upstream. At the late production stages new dev ids were introduced. These are now in production, so its important for the driver to recognize these. And also fix the board caps for AQC115C adapter. Fixes: b3f0c79cba206 ("net: atlantic: A2 hw_ops skeleton") Signed-off-by: Nikita Danilov <ndanilov@aquantia.com> Signed-off-by: Sudarsana Reddy Kalluru <skalluru@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-08atlantic: Fix to display FW bundle version instead of FW mac version.Sameer Saurabh1-3/+3
commit 2465c802232bc8d2b5bd83b55b08d05c11808704 upstream. The correct way to reflect firmware version is to use bundle version. Hence populating the same instead of MAC fw version. Fixes: c1be0bf092bd2 ("net: atlantic: common functions needed for basic A2 init/deinit hw_ops") Signed-off-by: Sameer Saurabh <ssaurabh@marvell.com> Signed-off-by: Sudarsana Reddy Kalluru <skalluru@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-08atlatnic: enable Nbase-t speeds with base-tNikita Danilov3-19/+13
commit aa685acd98eae25d5351e30288d6cfb65b9c80a5 upstream. When 2.5G is advertised, N-Base should be advertised against the T-base caps. N5G is out of use in baseline code and driver should treat both 5G and N5G (and also 2.5G and N2.5G) equally from user perspective. Fixes: 5cfd54d7dc186 ("net: atlantic: minimal A2 fw_ops") Signed-off-by: Nikita Danilov <ndanilov@aquantia.com> Signed-off-by: Sudarsana Reddy Kalluru <skalluru@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-08atlantic: Increase delay for fw transactionsDmitry Bogdanov1-2/+5
commit aa1dcb5646fdf34a15763facf4bf5e482a2814ca upstream. The max waiting period (of 1 ms) while reading the data from FW shared buffer is too small for certain types of data (e.g., stats). There's a chance that FW could be updating buffer at the same time and driver would be unsuccessful in reading data. Firmware manual recommends to have 1 sec timeout to fix this issue. Fixes: 5cfd54d7dc186 ("net: atlantic: minimal A2 fw_ops") Signed-off-by: Dmitry Bogdanov <dbezrukov@marvell.com> Signed-off-by: Sudarsana Reddy Kalluru <skalluru@marvell.com> Signed-off-by: Igor Russkikh <irusskikh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-08octeontx2-af: Fix a memleak bug in rvu_mbox_init()Zhou Qingyang1-1/+1
commit e07a097b4986afb8f925d0bb32612e1d3e88ce15 upstream. In rvu_mbox_init(), mbox_regions is not freed or passed out under the switch-default region, which could lead to a memory leak. Fix this bug by changing 'return err' to 'goto free_regions'. This bug was found by a static analyzer. The analysis employs differential checking to identify inconsistent security operations (e.g., checks or kfrees) between two code paths and confirms that the inconsistent operations are not recovered in the current function or the callers, so they constitute bugs. Note that, as a bug found by static analysis, it can be a false positive or hard to trigger. Multiple researchers have cross-reviewed the bug. Builds with CONFIG_OCTEONTX2_AF=y show no new warnings, and our static analyzer no longer warns about this code. Fixes: 98c561116360 (“octeontx2-af: cn10k: Add mbox support for CN10K platform”) Signed-off-by: Zhou Qingyang <zhou1615@umn.edu> Link: https://lore.kernel.org/r/20211130165039.192426-1-zhou1615@umn.edu Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-08dpaa2-eth: destroy workqueue at the end of remove functionDongliang Mu1-0/+2
commit f4a8adbfe4841491b60c14fe610571e1422359f9 upstream. The commit c55211892f46 ("dpaa2-eth: support PTP Sync packet one-step timestamping") forgets to destroy workqueue at the end of remove function. Fix this by adding destroy_workqueue before fsl_mc_portal_free and free_netdev. Fixes: c55211892f46 ("dpaa2-eth: support PTP Sync packet one-step timestamping") Signed-off-by: Dongliang Mu <mudongliangabcd@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-08net: marvell: mvpp2: Fix the computation of shared CPUsChristophe JAILLET1-1/+1
commit b83f5ac7d922e69a109261f5f940eebbd4e514c4 upstream. 'bitmap_fill()' fills a bitmap one 'long' at a time. It is likely that an exact number of bits is expected. Use 'bitmap_set()' instead in order not to set unexpected bits. Fixes: e531f76757eb ("net: mvpp2: handle cases where more CPUs are available than s/w threads") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-08net: stmmac: Avoid DMA_CHAN_CONTROL write if no Split Header supportVincent Whitchurch1-5/+6
commit f8e7dfd6fdabb831846ab1970a875746559d491b upstream. The driver assumes that split headers can be enabled/disabled without stopping/starting the device, so it writes DMA_CHAN_CONTROL from stmmac_set_features(). However, on my system (IP v5.10a without Split Header support), simply writing DMA_CHAN_CONTROL when DMA is running (for example, with the commands below) leads to a TX watchdog timeout. host$ socat TCP-LISTEN:1024,fork,reuseaddr - & device$ ethtool -K eth0 tso off device$ ethtool -K eth0 tso on device$ dd if=/dev/zero bs=1M count=10 | socat - TCP4:host:1024 <tx watchdog timeout> Note that since my IP is configured without Split Header support, the driver always just reads and writes the same value to the DMA_CHAN_CONTROL register. I don't have access to any platforms with Split Header support so I don't know if these writes to the DMA_CHAN_CONTROL while DMA is running actually work properly on such systems. I could not find anything in the databook that says that DMA_CHAN_CONTROL should not be written when the DMA is running. But on systems without Split Header support, there is in any case no need to call enable_sph() in stmmac_set_features() at all since SPH can never be toggled, so we can avoid the watchdog timeout there by skipping this call. Fixes: 8c6fc097a2f4acf ("net: stmmac: gmac4+: Add Split Header support") Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-12-08net/mlx4_en: Fix an use-after-free bug in mlx4_en_try_alloc_resources()Zhou Qingyang1-2/+7
commit addad7643142f500080417dd7272f49b7a185570 upstream. In mlx4_en_try_alloc_resources(), mlx4_en_copy_priv() is called and tmp->tx_cq will be freed on the error path of mlx4_en_copy_priv(). After that mlx4_en_alloc_resources() is called and there is a dereference of &tmp->tx_cq[t][i] in mlx4_en_alloc_resources(), which could lead to a use after free problem on failure of mlx4_en_copy_priv(). Fix this bug by adding a check of mlx4_en_copy_priv() This bug was found by a static analyzer. The analysis employs differential checking to identify inconsistent security operations (e.g., checks or kfrees) between two code paths and confirms that the inconsistent operations are not recovered in the current function or the callers, so they constitute bugs. Note that, as a bug found by static analysis, it can be a false positive or hard to trigger. Multiple researchers have cross-reviewed the bug. Builds with CONFIG_MLX4_EN=m show no new warnings, and our static analyzer no longer warns about this code. Fixes: ec25bc04ed8e ("net/mlx4_en: Add resilience in low memory systems") Signed-off-by: Zhou Qingyang <zhou1615@umn.edu> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Link: https://lore.kernel.org/r/20211130164438.190591-1-zhou1615@umn.edu Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-03 10:50:57 +0300