summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet
AgeCommit message (Collapse)AuthorFilesLines
2021-08-09net: fec: fix build error for ARCH m68kJoakim Zhang1-0/+2
reproduce: wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross chmod +x ~/bin/make.cross make.cross ARCH=m68k m5272c3_defconfig make.cross ARCH=m68k drivers/net/ethernet/freescale/fec_main.c: In function 'fec_enet_eee_mode_set': >> drivers/net/ethernet/freescale/fec_main.c:2758:33: error: 'FEC_LPI_SLEEP' undeclared (first use in this function); did you mean 'FEC_ECR_SLEEP'? 2758 | writel(sleep_cycle, fep->hwp + FEC_LPI_SLEEP); | ^~~~~~~~~~~~~ arch/m68k/include/asm/io_no.h:25:66: note: in definition of macro '__raw_writel' 25 | #define __raw_writel(b, addr) (void)((*(__force volatile u32 *) (addr)) = (b)) | ^~~~ drivers/net/ethernet/freescale/fec_main.c:2758:2: note: in expansion of macro 'writel' 2758 | writel(sleep_cycle, fep->hwp + FEC_LPI_SLEEP); | ^~~~~~ drivers/net/ethernet/freescale/fec_main.c:2758:33: note: each undeclared identifier is reported only once for each function it appears in 2758 | writel(sleep_cycle, fep->hwp + FEC_LPI_SLEEP); | ^~~~~~~~~~~~~ arch/m68k/include/asm/io_no.h:25:66: note: in definition of macro '__raw_writel' 25 | #define __raw_writel(b, addr) (void)((*(__force volatile u32 *) (addr)) = (b)) | ^~~~ drivers/net/ethernet/freescale/fec_main.c:2758:2: note: in expansion of macro 'writel' 2758 | writel(sleep_cycle, fep->hwp + FEC_LPI_SLEEP); | ^~~~~~ >> drivers/net/ethernet/freescale/fec_main.c:2759:32: error: 'FEC_LPI_WAKE' undeclared (first use in this function) 2759 | writel(wake_cycle, fep->hwp + FEC_LPI_WAKE); | ^~~~~~~~~~~~ arch/m68k/include/asm/io_no.h:25:66: note: in definition of macro '__raw_writel' 25 | #define __raw_writel(b, addr) (void)((*(__force volatile u32 *) (addr)) = (b)) | ^~~~ drivers/net/ethernet/freescale/fec_main.c:2759:2: note: in expansion of macro 'writel' 2759 | writel(wake_cycle, fep->hwp + FEC_LPI_WAKE); | ^~~~~~ This patch adds register definition for M5272 platform to pass build. Fixes: b82f8c3f1409 ("net: fec: add eee mode tx lpi support") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-09devlink: Set device as early as possibleLeon Romanovsky27-54/+66
All kernel devlink implementations call to devlink_alloc() during initialization routine for specific device which is used later as a parent device for devlink_register(). Such late device assignment causes to the situation which requires us to call to device_register() before setting other parameters, but that call opens devlink to the world and makes accessible for the netlink users. Any attempt to move devlink_register() to be the last call generates the following error due to access to the devlink->dev pointer. [ 8.758862] devlink_nl_param_fill+0x2e8/0xe50 [ 8.760305] devlink_param_notify+0x6d/0x180 [ 8.760435] __devlink_params_register+0x2f1/0x670 [ 8.760558] devlink_params_register+0x1e/0x20 The simple change of API to set devlink device in the devlink_alloc() instead of devlink_register() fixes all this above and ensures that prior to call to devlink_register() everything already set. Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-09net: ethernet: ti: cpsw: fix min eth packet size for non-switch use-casesGrygorii Strashko2-3/+8
The CPSW switchdev driver inherited fix from commit 9421c9015047 ("net: ethernet: ti: cpsw: fix min eth packet size") which changes min TX packet size to 64bytes (VLAN_ETH_ZLEN, excluding ETH_FCS). It was done to fix HW packed drop issue when packets are sent from Host to the port with PVID and un-tagging enabled. Unfortunately this breaks some other non-switch specific use-cases, like: - [1] CPSW port as DSA CPU port with DSA-tag applied at the end of the packet - [2] Some industrial protocols, which expects min TX packet size 60Bytes (excluding FCS). Fix it by configuring min TX packet size depending on driver mode - 60Bytes (ETH_ZLEN) for multi mac (dual-mac) mode - 64Bytes (VLAN_ETH_ZLEN) for switch mode and update it during driver mode change and annotate with READ_ONCE()/WRITE_ONCE() as it can be read by napi while writing. [1] https://lore.kernel.org/netdev/20210531124051.GA15218@cephalopod/ [2] https://e2e.ti.com/support/arm/sitara_arm/f/791/t/701669 Cc: stable@vger.kernel.org Fixes: ed3525eda4c4 ("net: ethernet: ti: introduce cpsw switchdev based driver part 1 - dual-emac") Reported-by: Ben Hutchings <ben.hutchings@essensium.com> Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-09Merge 5.14-rc5 into driver-core-nextGreg Kroah-Hartman49-256/+479
We need the driver core fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-08-08bnxt_en: Use register window 6 instead of 5 to read the PHCMichael Chan1-2/+2
Some older Broadcom debug tools use window 5 and may conflict, so switch to use window 6 instead. Fixes: 118612d519d8 ("bnxt_en: Add PTP clock APIs, ioctls, and ethtool methods") Reviewed-by: Andy Gospodarek <gospo@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-08bnxt_en: Update firmware call to retrieve TX PTP timestampMichael Chan3-4/+11
New firmware interface requires the PTP sequence ID header offset to be passed to the firmware to properly find the matching timestamp for all protocols. Fixes: 83bb623c968e ("bnxt_en: Transmit and retrieve packet timestamps") Reviewed-by: Edwin Peer <edwin.peer@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-08bnxt_en: Update firmware interface to 1.10.2.52Michael Chan1-21/+55
The key change is the firmware call to retrieve the PTP TX timestamp. The header offset for the PTP sequence number field is now added. Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-08devlink: Simplify devlink port API callsLeon Romanovsky4-16/+12
Devlink port already has pointer to the devlink instance and all API calls that forward these devlink ports to the drivers perform same "devlink_port->devlink" assignment before actual call. This patch removes useless parameter and allows us in the future to create specific devlink_port_ops to manage user space access with reliable ops assignment. Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-07net: ethernet: stmmac: Do not use unreachable() in ipq806x_gmac_probe()Nathan Chancellor1-10/+8
When compiling with clang in certain configurations, an objtool warning appears: drivers/net/ethernet/stmicro/stmmac/dwmac-ipq806x.o: warning: objtool: ipq806x_gmac_probe() falls through to next function phy_modes() This happens because the unreachable annotation in the third switch statement is not eliminated. The compiler should know that the first default case would prevent the second and third from being reached as the comment notes but sanitizer options can make it harder for the compiler to reason this out. Help the compiler out by eliminating the unreachable() annotation and unifying the default case error handling so that there is no objtool warning, the meaning of the code stays the same, and there is less duplication. Reported-by: Sami Tolvanen <samitolvanen@google.com> Tested-by: Sami Tolvanen <samitolvanen@google.com> Signed-off-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-07tulip: Remove deadcode on startup true conditionColin Ian King1-1/+1
The true check on the variable startable in the ternary operator is always false because the previous if statement handles the true condition for startable. Hence the ternary check is dead code and can be removed. Addresses-Coverity: ("Logically dead code") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-07r8169: change the L0/L1 entrance latencies for RTL8106eHayes Wang1-0/+3
The original L0 and L1 entrance latencies of RTL8106e are 4us. And they cause the delay of link-up interrupt when enabling ASPM. Change the L0 entrance latency to 7us and L1 entrance latency to 32us. Then, they could avoid the issue. Tested-by: Koba Ko <koba.ko@canonical.com> Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-07Revert "r8169: avoid link-up interrupt issue on RTL8106e if user enables ASPM"Hayes Wang1-0/+1
This reverts commit 1ee8856de82faec9bc8bd0f2308a7f27e30ba207. This is used to re-enable ASPM on RTL8106e, if it is possible. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-07net: ethernet: ti: davinci_cpdma: revert "drop frame padding"Grygorii Strashko4-0/+8
This reverts commit 9ffc513f95ee ("net: ethernet: ti: davinci_cpdma: drop frame padding") which has depndency from not yet merged patch [1] and so breaks cpsw_new driver. [1] https://patchwork.kernel.org/project/netdevbpf/patch/20210805145511.12016-1-grygorii.strashko@ti.com/ Fixes: 9ffc513f95ee ("net: ethernet: ti: davinci_cpdma: drop frame padding") Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Link: https://lore.kernel.org/r/20210806142809.15069-1-grygorii.strashko@ti.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-08-06net: mvvp2: fix short frame size on s390John Hubbard1-1/+1
On s390, the following build warning occurs: drivers/net/ethernet/marvell/mvpp2/mvpp2.h:844:2: warning: overflow in conversion from 'long unsigned int' to 'int' changes value from '18446744073709551584' to '-32' [-Woverflow] 844 | ((total_size) - MVPP2_SKB_HEADROOM - MVPP2_SKB_SHINFO_SIZE) This happens because MVPP2_SKB_SHINFO_SIZE, which is 320 bytes (which is already 64-byte aligned) on some architectures, actually gets ALIGN'd up to 512 bytes in the s390 case. So then, when this is invoked: MVPP2_RX_MAX_PKT_SIZE(MVPP2_BM_SHORT_FRAME_SIZE) ...that turns into: 704 - 224 - 512 == -32 ...which is not a good frame size to end up with! The warning above is a bit lucky: it notices a signed/unsigned bad behavior here, which leads to the real problem of a frame that is too short for its contents. Increase MVPP2_BM_SHORT_FRAME_SIZE by 32 (from 704 to 736), which is just exactly big enough. (The other values can't readily be changed without causing a lot of other problems.) Fixes: 07dd0a7aae7f ("mvpp2: add basic XDP support") Cc: Sven Auhagen <sven.auhagen@voleatech.de> Cc: Matteo Croce <mcroce@microsoft.com> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: John Hubbard <jhubbard@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-06net: ethernet: ti: am65-cpsw: use napi_complete_done() in TX completionGrygorii Strashko1-5/+5
This patch enables support for hard irqs deferral feature from Eric Dumazet [1] for TI K3 CPSW driver by using napi_complete_done() in TX completion path. Depending on gro_flush_timeout and napi_defer_hard_irqs at gives up to 30% CPU utilization reduction: gro_flush_timeout=50000 napi_defer_hard_irqs=2 netperf -l 10 -H 192.168.1.1 -t UDP_STREAM -c -C -- -m 1470 MIGRATED UDP STREAM TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to 192.168.1.1 () port 0 AF_INET Socket Message Elapsed Messages CPU Service Size Size Time Okay Errors Throughput Util Demand bytes bytes secs # # 10^6bits/sec % SS us/KB before: 212992 1470 10.00 809632 0 952.0 42.98 14.792 212992 10.00 809630 952.0 50.66 8.719 after: 212992 1470 10.00 813686 0 956.8 32.14 11.009 212992 10.00 813686 956.8 50.05 8.570 [1] https://lore.kernel.org/netdev/20200422161329.56026-1-edumazet@google.com/ Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-06net: ti: am65-cpsw-nuss: fix RX IRQ state after .ndo_stop()Vignesh Raghavendra2-2/+13
On TI K3 am64x platform the issue with RX IRQ is observed - it's become disabled forever after .ndo_stop(). The K3 CPSW driver manipulates RX IRQ by using standard Linux enable_irq()/disable_irq_nosync() API as there is no IRQ enable/disable options in CPSW HW itself, as result during .ndo_stop() following sequence happens phy_stop() teardown TX/RX channels wait for TX tdown complete napi_disable(TX) clean up TX channels (a) napi_disable(RX) At point (a) it's not possible to predict if RX IRQ was triggered or not. if RX IRQ was triggered then it also not possible to definitely say if RX NAPI was run or only scheduled and immediately canceled by napi_disable(RX). Actually the last case causes RX IRQ to be permanently disabled. Another observed issue is that RX IRQ enable counter become unbalanced if (gro_flush_timeout =! 0) while (napi_defer_hard_irqs == 0): Unbalanced enable for IRQ 44 WARNING: CPU: 0 PID: 10 at ../kernel/irq/manage.c:776 __enable_irq+0x38/0x80 __enable_irq+0x38/0x80 enable_irq+0x54/0xb0 am65_cpsw_nuss_rx_poll+0x2f4/0x368 __napi_poll+0x34/0x1b8 net_rx_action+0xe4/0x220 _stext+0x11c/0x284 run_ksoftirqd+0x4c/0x60 To avoid above issues introduce flag indicating if RX was actually disabled before enabling it in am65_cpsw_nuss_rx_poll() and restore RX IRQ state in .ndo_open() Fixes: 4f7cce272403 ("net: ethernet: ti: am65-cpsw: add support for am64x cpsw3g") Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com> Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-06net: ethernet: ti: davinci_cpdma: drop frame paddingGrygorii Strashko4-8/+0
Hence all users of davinci_cpdma switched to skb_put_padto() the frame padding can be removed from it. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-06net: ethernet: ti: davinci_emac: switch to use skb_put_padto()Grygorii Strashko1-1/+1
Use skb_put_padto() instead of skb_padto() so skb->len also got updated, as preparation for further removing frame padding from cpdma. It also makes xmit path more clear and linear. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-06net: ethernet: ti: cpsw: switch to use skb_put_padto()Grygorii Strashko1-1/+1
Use skb_put_padto() instead of skb_padto() so skb->len also got updated, as preparation for further removing frame padding from cpdma. It also makes xmit path more clear and linear. Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-06Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski10-19/+40
Build failure in drivers/net/wwan/mhi_wwan_mbim.c: add missing parameter (0, assuming we don't want buffer pre-alloc). Conflict in drivers/net/dsa/sja1105/sja1105_main.c between: 589918df9322 ("net: dsa: sja1105: be stateless with FDB entries on SJA1105P/Q/R/S/SJA1110 too") 0fac6aa098ed ("net: dsa: sja1105: delete the best_effort_vlan_filtering mode") Follow the instructions from the commit message of the former commit - removed the if conditions. When looking at commit 589918df9322 ("net: dsa: sja1105: be stateless with FDB entries on SJA1105P/Q/R/S/SJA1110 too") note that the mask_iotag fields get removed by the following patch. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-08-05net/mlx5: Lag, Create shared FDB when in switchdev modeMark Bloch3-18/+105
If both eswitches are in switchdev mode and the uplink representors are enslaved to the same bond device create a shared FDB configuration. When moving to shared FDB mode not only the hardware needs be configured but the RDMA driver needs to reconfigure itself. When such change is done, unload the RDMA devices, configure the hardware and load the RDMA representors. When destroying the lag (can happen if a PCI function is unbinded, driver is unloaded or by just removing a netdev from the bond) make sure to restore the system to the previous state only if possible. For example, if a PCI function is unbinded there is no need to load the representors as the device is going away. Signed-off-by: Mark Bloch <mbloch@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-08-05net/mlx5: E-Switch, add logic to enable shared FDBMark Bloch6-2/+394
Shared FDB allows to direct traffic from all the vports in the HCA to a single eswitch. In order to do that three things are needed. 1) Point the ingress ACL of the slave uplink to that of the master. With this, wire traffic from both uplinks will reach the same eswitch with the same metadata where a single steering rule can catch traffic from both ports. 2) Set the FDB root flow table of the slave's eswitch to that of the master. As this flow table can change dynamically make sure to sync it on any set root flow table FDB command. This will make sure traffic from SFs, VFs, ECPFs and PFs reach the master eswitch. 3) Split wire traffic at the eswitch manager egress ACL so that it's directed to the native eswitch manager. We only treat wire traffic from both ports the same at the eswitch level. If such traffic wasn't handled in the eswitch it needs to reach the right representor to be processed by software. For example LACP packets should *always* reach the right uplink representor for correct operation. Signed-off-by: Mark Bloch <mbloch@nvidia.com> Reviewed-by: Mark Zhang <markzhang@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-08-05net/mlx5: Lag, move lag destruction to a workqueueMark Bloch1-8/+9
If a netdev is removed from the lag the lag should be destroyed. With downstream patches this might trigger a reconfiguration of representors on a different eswitch and such we don't have the proper locking to so from this path. Move the destruction to be done by the workqueue. As the destruction won't affect the netdev side it okay to do so. The RDMA side will be reconfigured and it already coded to handle such reconfiguration. Signed-off-by: Mark Bloch <mbloch@nvidia.com> Reviewed-by: Mark Zhang <markzhang@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-08-05net/mlx5: Lag, properly lock eswitch if neededMark Bloch7-18/+107
Currently when doing hardware lag we check the eswitch mode but as this isn't done under a lock the check isn't valid. As the code needs to sync between two different devices an extra care is needed. - When going to change eswitch mode, if hardware lag is active destroy it. - While changing eswitch modes block any hardware bond creation. - Delay handling bonding events until there are no mode changes in progress. - When attaching a new mdev to lag, block until there is no mode change in progress. In order for the mode change to finish the interface lock will have to be taken. Release the lock and sleep for 100ms to allow forward progress. As this is a very rare condition (can happen if the user unbinds and binds a PCI function while also changing eswitch mode of the other PCI function) it has no real world impact. As taking multiple eswitch mode locks is now required lockdep will complain about a possible deadlock. Register a key per eswitch to make lockdep happy. Signed-off-by: Mark Bloch <mbloch@nvidia.com> Reviewed-by: Mark Zhang <markzhang@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-08-05net/mlx5: Add send to vport rules on paired deviceMark Bloch3-3/+101
When two mlx5 devices are paired in switchdev mode, always offload the send-to-vport rule to the peer E-Switch. This allows to abstract the logic when this is really necessary (single FDB) and combine the logic of both cases into one. Signed-off-by: Mark Bloch <mbloch@nvidia.com> Reviewed-by: Mark Zhang <markzhang@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-08-05net/mlx5: E-Switch, Add event callback for representorsMark Bloch1-3/+47
This callback will allow to notify representors about relevant events when in OFFLOADS mode. In downstream patches, this will be used to notify about PAIR/UNPAIR devcom events. Signed-off-by: Mark Bloch <mbloch@nvidia.com> Reviewed-by: Mark Zhang <markzhang@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-08-05net/mlx5e: Use shared mappings for restoring from metadataRoi Dayan4-10/+39
FTEs are added with mapped metadata which is saved per eswitch. When uplink reps are bonded and we are in a single FDB mode, we could fail to find metadata which was stored on one eswitch mapping but not the other or with a different id. To resolve this issue use shared mapping between eswitch ports. We do not have any conflict using a single mapping, for a type, between the ports. Signed-off-by: Roi Dayan <roid@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-08-05net/mlx5e: Add an option to create a shared mappingRoi Dayan2-0/+50
The shared mapping is identified by an id and type. Signed-off-by: Roi Dayan <roid@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-08-05net/mlx5: E-Switch, set flow source for send to uplink ruleAriel Levkovich1-0/+3
Set the flow source param to local vport for the uplink rep send-to-vport rule. This will comply with the recent changes in SW steering that use the flow source as an indication for the rule type - rx or tx. Since the uplink send-to-vport rule is forwarding traffic to the wire it has to indicate that it is an sx rule and can't use the any port value in the flow source. Signed-off-by: Ariel Levkovich <lariel@nvidia.com> Reviewed-by: Roi Dayan <roid@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-08-05{net, RDMA}/mlx5: Extend send to vport rulesMark Bloch2-3/+4
In shared FDB there is only one eswitch which is active and it receives traffic from all representors and all vports in the HCA. While the Ethernet representor will always reside on its native PF the IB representor will not. Extend send to vport rule creation to support such flows. Need to account for source vport that sends the traffic (on which the representors resides) and the target eswitch the traffic which reach. Signed-off-by: Mark Bloch <mbloch@nvidia.com> Reviewed-by: Mark Zhang <markzhang@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-08-05net/mlx5: Lag, add initial logic for shared FDBMark Bloch2-0/+50
As shared FDB requires changes in two subsystems first expose the needed core functions so the RDMA side can be changed. mlx5_lag_is_master(): return true if a given mlx5 device is the lag master. mlx5_lag_is_shared_fdb(): Returns true if the lag mode is shared FDB. mlx5_lag_get_peer_mdev(): Return the peer mdev in lag. The mentioned functions will be used by downstream patches in order to add support for shared FDB for the RDMA side. Signed-off-by: Mark Bloch <mbloch@nvidia.com> Reviewed-by: Mark Zhang <markzhang@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-08-05net/mlx5: Return mdev from eswitchMark Bloch1-0/+12
Export a function so users can retrieve the mellanox device that manages the eswitch from the eswitch device. Signed-off-by: Mark Bloch <mbloch@nvidia.com> Reviewed-by: Mark Zhang <markzhang@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-08-05net: vxge: fix use-after-free in vxge_device_unregisterPavel Skripkin1-3/+3
Smatch says: drivers/net/ethernet/neterion/vxge/vxge-main.c:3518 vxge_device_unregister() error: Using vdev after free_{netdev,candev}(dev); drivers/net/ethernet/neterion/vxge/vxge-main.c:3518 vxge_device_unregister() error: Using vdev after free_{netdev,candev}(dev); drivers/net/ethernet/neterion/vxge/vxge-main.c:3520 vxge_device_unregister() error: Using vdev after free_{netdev,candev}(dev); drivers/net/ethernet/neterion/vxge/vxge-main.c:3520 vxge_device_unregister() error: Using vdev after free_{netdev,candev}(dev); Since vdev pointer is netdev private data accessing it after free_netdev() call can cause use-after-free bug. Fix it by moving free_netdev() call at the end of the function Fixes: 6cca200362b4 ("vxge: cleanup probe error paths") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Pavel Skripkin <paskripkin@gmail.com> Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-08-05net: fec: fix use-after-free in fec_drv_removePavel Skripkin1-1/+1
Smatch says: drivers/net/ethernet/freescale/fec_main.c:3994 fec_drv_remove() error: Using fep after free_{netdev,candev}(ndev); drivers/net/ethernet/freescale/fec_main.c:3995 fec_drv_remove() error: Using fep after free_{netdev,candev}(ndev); Since fep pointer is netdev private data, accessing it after free_netdev() call can cause use-after-free bug. Fix it by moving free_netdev() call at the end of the function Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Fixes: a31eda65ba21 ("net: fec: fix clock count mis-match") Signed-off-by: Pavel Skripkin <paskripkin@gmail.com> Reviewed-by: Joakim Zhang <qiangqing.zhang@nxp.com> Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-08-05net: ethernet: ti: am65-cpsw: fix crash in ↵Grygorii Strashko1-1/+5
am65_cpsw_port_offload_fwd_mark_update() The am65_cpsw_port_offload_fwd_mark_update() causes NULL exception crash when there is at least one disabled port and any other port added to the bridge first time. Unable to handle kernel NULL pointer dereference at virtual address 0000000000000858 pc : am65_cpsw_port_offload_fwd_mark_update+0x54/0x68 lr : am65_cpsw_netdevice_event+0x8c/0xf0 Call trace: am65_cpsw_port_offload_fwd_mark_update+0x54/0x68 notifier_call_chain+0x54/0x98 raw_notifier_call_chain+0x14/0x20 call_netdevice_notifiers_info+0x34/0x78 __netdev_upper_dev_link+0x1c8/0x290 netdev_master_upper_dev_link+0x1c/0x28 br_add_if+0x3f0/0x6d0 [bridge] Fix it by adding proper check for port->ndev != NULL. Fixes: 2934db9bcb30 ("net: ti: am65-cpsw-nuss: Add netdevice notifiers") Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-05bnx2x: fix an error code in bnx2x_nic_load()Dan Carpenter1-1/+2
Set the error code if bnx2x_alloc_fw_stats_mem() fails. The current code returns success. Fixes: ad5afc89365e ("bnx2x: Separate VF and PF logic") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-04Revert "net: build all switchdev drivers as modules when the bridge is a module"Vladimir Oltean2-3/+0
This reverts commit b0e81817629a496854ff1799f6cbd89597db65fd. Explicit driver dependency on the bridge is no longer needed since switchdev_bridge_port_{,un}offload() is no longer implemented by the bridge driver but by switchdev. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Tested-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-04net: make switchdev_bridge_port_{,unoffload} loosely coupled with the bridgeVladimir Oltean2-2/+2
With the introduction of explicit offloading API in switchdev in commit 2f5dc00f7a3e ("net: bridge: switchdev: let drivers inform which bridge ports are offloaded"), we started having Ethernet switch drivers calling directly into a function exported by net/bridge/br_switchdev.c, which is a function exported by the bridge driver. This means that drivers that did not have an explicit dependency on the bridge before, like cpsw and am65-cpsw, now do - otherwise it is not possible to call a symbol exported by a driver that can be built as module unless you are a module too. There was an attempt to solve the dependency issue in the form of commit b0e81817629a ("net: build all switchdev drivers as modules when the bridge is a module"). Grygorii Strashko, however, says about it: | In my opinion, the problem is a bit bigger here than just fixing the | build :( | | In case, of ^cpsw the switchdev mode is kinda optional and in many | cases (especially for testing purposes, NFS) the multi-mac mode is | still preferable mode. | | There were no such tight dependency between switchdev drivers and | bridge core before and switchdev serviced as independent, notification | based layer between them, so ^cpsw still can be "Y" and bridge can be | "M". Now for mostly every kernel build configuration the CONFIG_BRIDGE | will need to be set as "Y", or we will have to update drivers to | support build with BRIDGE=n and maintain separate builds for | networking vs non-networking testing. But is this enough? Wouldn't | it cause 'chain reaction' required to add more and more "Y" options | (like CONFIG_VLAN_8021Q)? | | PS. Just to be sure we on the same page - ARM builds will be forced | (with this patch) to have CONFIG_TI_CPSW_SWITCHDEV=m and so all our | automation testing will just fail with omap2plus_defconfig. In the light of this, it would be desirable for some configurations to avoid dependencies between switchdev drivers and the bridge, and have the switchdev mode as completely optional within the driver. Arnd Bergmann also tried to write a patch which better expressed the build time dependency for Ethernet switch drivers where the switchdev support is optional, like cpsw/am65-cpsw, and this made the drivers follow the bridge (compile as module if the bridge is a module) only if the optional switchdev support in the driver was enabled in the first place: https://patchwork.kernel.org/project/netdevbpf/patch/20210802144813.1152762-1-arnd@kernel.org/ but this still did not solve the fact that cpsw and am65-cpsw now must be built as modules when the bridge is a module - it just expressed correctly that optional dependency. But the new behavior is an apparent regression from Grygorii's perspective. So to support the use case where the Ethernet driver is built-in, NET_SWITCHDEV (a bool option) is enabled, and the bridge is a module, we need a framework that can handle the possible absence of the bridge from the running system, i.e. runtime bloatware as opposed to build-time bloatware. Luckily we already have this framework, since switchdev has been using it extensively. Events from the bridge side are transmitted to the driver side using notifier chains - this was originally done so that unrelated drivers could snoop for events emitted by the bridge towards ports that are implemented by other drivers (think of a switch driver with LAG offload that listens for switchdev events on a bonding/team interface that it offloads). There are also events which are transmitted from the driver side to the bridge side, which again are modeled using notifiers. SWITCHDEV_FDB_ADD_TO_BRIDGE is an example of this, and deals with notifying the bridge that a MAC address has been dynamically learned. So there is a precedent we can use for modeling the new framework. The difference compared to SWITCHDEV_FDB_ADD_TO_BRIDGE is that the work that the bridge needs to do when a port becomes offloaded is blocking in its nature: replay VLANs, MDBs etc. The calling context is indeed blocking (we are under rtnl_mutex), but the existing switchdev notification chain that the bridge is subscribed to is only the atomic one. So we need to subscribe the bridge to the blocking switchdev notification chain too. This patch: - keeps the driver-side perception of the switchdev_bridge_port_{,un}offload unchanged - moves the implementation of switchdev_bridge_port_{,un}offload from the bridge module into the switchdev module. - makes everybody that is subscribed to the switchdev blocking notifier chain "hear" offload & unoffload events - makes the bridge driver subscribe and handle those events - moves the bridge driver's handling of those events into 2 new functions called br_switchdev_port_{,un}offload. These functions contain in fact the core of the logic that was previously in switchdev_bridge_port_{,un}offload, just that now we go through an extra indirection layer to reach them. Unlike all the other switchdev notification structures, the structure used to carry the bridge port information, struct switchdev_notifier_brport_info, does not contain a "bool handled". This is because in the current usage pattern, we always know that a switchdev bridge port offloading event will be handled by the bridge, because the switchdev_bridge_port_offload() call was initiated by a NETDEV_CHANGEUPPER event in the first place, where info->upper_dev is a bridge. So if the bridge wasn't loaded, then the CHANGEUPPER event couldn't have happened. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Tested-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-04nfp: use netif_set_real_num_queues()Jakub Kicinski1-8/+3
Avoid reconfig problems due to failures in netif_set_real_num_tx_queues() by using netif_set_real_num_queues(). Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-04net/prestera: Fix devlink groups leakage in error flowLeon Romanovsky1-0/+2
Devlink trap group is registered but not released in error flow, add the missing devlink_trap_groups_unregister() call. Fixes: 0a9003f45e91 ("net: marvell: prestera: devlink: add traps/groups implementation") Signed-off-by: Leon Romanovsky <leonro@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-04dpaa2-switch: export MAC statistics in ethtoolIoana Ciornei1-5/+19
If a switch port is connected to a MAC, use the common dpaa2-mac support for exporting the available MAC statistics. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-04dpaa2-switch: add a prefix to HW ethtool statsIoana Ciornei1-12/+12
In the next patch, we'll add support for also exporting the MAC statistics in the ethtool stats. Annotate already present HW stats with a suggestive prefix. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-04dpaa2-switch: integrate the MAC endpoint supportIoana Ciornei5-7/+130
Integrate the common MAC endpoint management support into the dpaa2-switch driver as well. Nothing special happens here, just that the already available dpaa2-mac functions are also called from dpaa2-switch. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-04bus: fsl-mc: extend fsl_mc_get_endpoint() to pass interface IDIoana Ciornei1-1/+1
In case of a switch DPAA2 object, the interface ID is also needed when querying for the object endpoint. Extend fsl_mc_get_endpoint() so that users can also pass the interface ID that are interested in. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-04dpaa2-switch: no need to check link state right after ndo_openIoana Ciornei1-14/+0
The call to dpaa2_switch_port_link_state_update is a leftover from the time when on DPAA2 platforms the PHYs were started at boot time so when an ifconfig was issued on the associated interface, the link status needed to be checked directly from the ndo_open() callback. This is not needed anymore since we are now properly integrated with the PHY layer thus a link interrupt will come directly from the PHY eventually without the need to call the sync function. Fix this up by removing the call to dpaa2_switch_port_link_state_update. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-04dpaa2-switch: do not enable the DPSW at probe timeIoana Ciornei1-6/+0
We should not enable the switch interfaces at probe time since this is trigged by the open callback. Remove the call dpsw_enable() which does exactly this. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-04dpaa2-switch: use the port index in the IRQ handlerIoana Ciornei1-16/+11
The MC firmware supplies us the switch interface index for which an interrupt was triggered. Use this to our advantage instead of looping through all the switch ports and doing unnecessary work. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-04dpaa2-switch: request all interrupts sources on the DPSWIoana Ciornei1-8/+6
Request all interrupt sources to be read and then cleared on the DPSW object. In the next patches we'll also add support for treating other interrupts. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-04net: fec: fix MAC internal delay doesn't workJoakim Zhang1-10/+38
This patch intends to fix MAC internal delay doesn't work, due to use of_property_read_u32() incorrectly, and improve this feature a bit: 1) check the delay value if valid, only program register when it's 2000ps. 2) only enable "enet_2x_txclk" clock when require MAC internal delay. Fixes: fc539459e900 ("net: fec: add MAC internal delayed clock feature support") Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com> Link: https://lore.kernel.org/r/20210803052424.19008-1-qiangqing.zhang@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-08-04octeontx2-af: Fix spelling mistake "Makesure" -> "Make sure"Colin Ian King1-1/+1
There is a spelling mistake in a NL_SET_ERR_MSG_MOD message. Fix it. Signed-off-by: Colin Ian King <colin.king@canonical.com> Link: https://lore.kernel.org/r/20210803105617.338546-1-colin.king@canonical.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-15 05:22:48 +0300