summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet
AgeCommit message (Collapse)AuthorFilesLines
2021-05-27net/mlx5: Add case for FS_FT_NIC_TX FT in MLX5_CAP_FLOWTABLE_TYPEPaul Blakey1-0/+1
Commit 16f1c5bb3ed7 ("net/mlx5: Check device capability for maximum flow counters") added MLX5_CAP_FLOWTABLE_TYPE but forgot to account for FS_FT_NIC_TX case in the expression. Although the expression will return 1 for this case instead of the actual cap, there isn't currently no known side affects of missing this case. Add the FS_FT_NIC_TX case. Signed-off-by: Paul Blakey <paulb@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-05-27net/mlx5: DR, Remove unused field of send_ring structYevgeny Kliteynik1-1/+0
Remove unused field of struct mlx5dr_send_ring Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-05-27net/mlx5e: RX, Remove unnecessary check in RX CQE compression handlingTariq Toukan1-1/+1
There are two reasons for exiting mlx5e_decompress_cqes_cont(): 1. The compression session is completed (cqd.left == 0). 2. The budget is exhausted (work_done == budget). If after calling mlx5e_decompress_cqes_cont() we have cqd.left > 0, it necessarily implies that budget is exhausted. The first part of the complex condition is covered by the second, hence we remove it here. Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-05-27net/mlx5e: IPsec/rep_tc: Fix rep_tc_update_skb drops IPsec packetHuy Nguyen1-2/+4
rep_tc copy REG_C1 to REG_B. IPsec crypto utilizes the whole REG_B register with BIT31 as IPsec marker. rep_tc_update_skb drops IPsec because it thought REG_B contains bad value. In previous patch, BIT 31 of REG_C1 is reserved for IPsec. Skip the rep_tc_update_skb if BIT31 of REG_B is set. Signed-off-by: Huy Nguyen <huyn@nvidia.com> Signed-off-by: Raed Salem <raeds@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-05-27net/mlx5e: TC: Reserved bit 31 of REG_C1 for IPsec offloadHuy Nguyen2-2/+2
Currently ASAP features fully utilize all the bits of the CQE's flow tag and ft_metadata field. The flow tag field cannot be used because the flow table tagging in FTE does not allow partial write. We agree to reserve bit 31 of CQE's ft_metadata for IPsec to avoid ASAP CT from dropping IPsec offloaded packet Here is the new bit layout of REG_C1. Tunnel option id is reduced to 11 bits: < IPSEC MARKER (1) | ESW_TUN_ID(12) | ESW_TUN_OPTS(11) | ESW_ZONE_ID(8) > Signed-off-by: Huy Nguyen <huyn@nvidia.com> Signed-off-by: Raed Salem <raeds@nvidia.com> Reviewed-by: Paul Blakey <paulb@nvidia.com> Reviewed-by: Roi Dayan <roid@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Paul Blakey <paulb@nvidia.com>
2021-05-27net/mlx5e: TC: Use bit counts for register mappingPaul Blakey5-49/+77
To prepare for next patch where we will use a non-byte aligned mapping, change all byte counts in register mapping to bits. Signed-off-by: Paul Blakey <paulb@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-05-27net/mlx5: CT: Avoid reusing modify header context for natted entriesPaul Blakey1-12/+38
Currently the driver is designed to reuse header modify context entries. Natted entries will always have a unique modify header, as such the modify header hashtable lookup is introducing an overhead. When the hashtable size exceeded 200k entries the tested insertion rate dropped from ~10k entries/sec to ~300 entries/sec. Don't use the re-use mechanism when creating modify headers for natted tuples. Signed-off-by: Paul Blakey <paulb@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-05-27net/mlx5e: CT, Remove newline from ct_dbg callRoi Dayan1-1/+1
ct_dbg() already adds a newline. Signed-off-by: Roi Dayan <roid@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
2021-05-27Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski52-334/+803
cdc-wdm: s/kill_urbs/poison_urbs/ to fix build Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-05-27Merge tag 'net-5.13-rc4' of ↵Linus Torvalds48-302/+742
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Networking fixes for 5.13-rc4, including fixes from bpf, netfilter, can and wireless trees. Notably including fixes for the recently announced "FragAttacks" WiFi vulnerabilities. Rather large batch, touching some core parts of the stack, too, but nothing hair-raising. Current release - regressions: - tipc: make node link identity publish thread safe - dsa: felix: re-enable TAS guard band mode - stmmac: correct clocks enabled in stmmac_vlan_rx_kill_vid() - stmmac: fix system hang if change mac address after interface ifdown Current release - new code bugs: - mptcp: avoid OOB access in setsockopt() - bpf: Fix nested bpf_bprintf_prepare with more per-cpu buffers - ethtool: stats: fix a copy-paste error - init correct array size Previous releases - regressions: - sched: fix packet stuck problem for lockless qdisc - net: really orphan skbs tied to closing sk - mlx4: fix EEPROM dump support - bpf: fix alu32 const subreg bound tracking on bitwise operations - bpf: fix mask direction swap upon off reg sign change - bpf, offload: reorder offload callback 'prepare' in verifier - stmmac: Fix MAC WoL not working if PHY does not support WoL - packetmmap: fix only tx timestamp on request - tipc: skb_linearize the head skb when reassembling msgs Previous releases - always broken: - mac80211: address recent "FragAttacks" vulnerabilities - mac80211: do not accept/forward invalid EAPOL frames - mptcp: avoid potential error message floods - bpf, ringbuf: deny reserve of buffers larger than ringbuf to prevent out of buffer writes - bpf: forbid trampoline attach for functions with variable arguments - bpf: add deny list of functions to prevent inf recursion of tracing programs - tls splice: check SPLICE_F_NONBLOCK instead of MSG_DONTWAIT - can: isotp: prevent race between isotp_bind() and isotp_setsockopt() - netfilter: nft_set_pipapo_avx2: Add irq_fpu_usable() check, fallback to non-AVX2 version Misc: - bpf: add kconfig knob for disabling unpriv bpf by default" * tag 'net-5.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (172 commits) net: phy: Document phydev::dev_flags bits allocation mptcp: validate 'id' when stopping the ADD_ADDR retransmit timer mptcp: avoid error message on infinite mapping mptcp: drop unconditional pr_warn on bad opt mptcp: avoid OOB access in setsockopt() nfp: update maintainer and mailing list addresses net: mvpp2: add buffer header handling in RX bnx2x: Fix missing error code in bnx2x_iov_init_one() net: zero-initialize tc skb extension on allocation net: hns: Fix kernel-doc sctp: fix the proc_handler for sysctl encap_port sctp: add the missing setting for asoc encap_port bpf, selftests: Adjust few selftest result_unpriv outcomes bpf: No need to simulate speculative domain for immediates bpf: Fix mask direction swap upon off reg sign change bpf: Wrap aux data inside bpf_sanitize_info container bpf: Fix BPF_LSM kconfig symbol dependency selftests/bpf: Add test for l3 use of bpf_redirect_peer bpftool: Add sock_release help info for cgroup attach/prog load command net: dsa: microchip: enable phy errata workaround on 9567 ...
2021-05-27i40e: Replace one-element array with flexible-array memberGustavo A. R. Silva1-1/+1
There is a regular need in the kernel to provide a way to declare having a dynamically sized set of trailing elements in a structure. Kernel code should always use “flexible array members”[1] for these cases. The older style of one-element or zero-length arrays should no longer be used[2]. Refactor the code according to the use of a flexible-array member in struct i40e_qvlist_info instead of one-element array, and use the struct_size() helper. [1] https://en.wikipedia.org/wiki/Flexible_array_member [2] https://www.kernel.org/doc/html/v5.10/process/deprecated.html#zero-length-and-one-element-arrays Link: https://github.com/KSPP/linux/issues/79 Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Acked-by: Shiraz Saleem <shiraz.saleem@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-05-26ixgbe: reduce checker warningsJesse Brandeburg1-4/+4
Fix the sparse warnings in the ixgbe crypto offload code. These changes were made in the most conservative way (force cast) in order to hopefully not break the code. I suspect that the code might still be broken on big-endian architectures, but no one is complaining, so I'm just leaving it functionally the same. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Cc: Shannon Nelson <snelson@pensando.io> Tested-by: Dave Switzer <david.switzer@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-05-26ixgbe: use checker safe conversionsJesse Brandeburg1-5/+4
The ixgbe hardware needs some very specific programming for certain registers, which led to some misguided usage of ntohs instead of using be16_to_cpu(), as well as a home grown swap followed by an ntohs. Sparse didn't like this at all, and this fixes the C=2 build, with code that uses native kernel interface. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Dave Switzer <david.switzer@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-05-26igbvf: convert to strongly typed descriptorsJesse Brandeburg1-21/+21
The igbvf driver for some reason never strongly typed it's descriptor formats. Make this driver like the rest of the Intel drivers and use __le* for our little endian descriptors. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-05-26intel: call csum functions with well formatted argumentsJesse Brandeburg2-2/+2
The sparse build (C=2) found that there were two drivers who had not been convered to call the csum_replace_by_diff() function with sparse clean arguments. Most if not all drivers force the cast like this patch does. So these drivers are now joining the party (a bit late), but with no functional change. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-05-26igb: override two checker warningsJesse Brandeburg1-2/+2
The igb PTP code was using htons() on a constant to try to byte swap the value before writing it to a register. This byte swap has the consequence of triggering sparse conflicts between the register write which expect cpu ordered input, and the code which generated a big endian constant. Just override the cast to make sure code doesn't change but silence the warning. Can't do a __swab16 in this case because big endian systems would then write the wrong value. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Dave Switzer <david.switzer@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-05-26igb: fix assignment on big endian machinesJesse Brandeburg1-2/+2
The igb driver was trying hard to be sparse correct, but somehow ended up converting a variable into little endian order and then tries to OR something with it. A much plainer way of doing things is to leave all variables and OR operations in CPU (non-endian) mode, and then convert to little endian only once, which is what this change does. This probably fixes a bug that might have been seen only on big endian systems. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Dave Switzer <david.switzer@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-05-26igb: handle vlan types with checker enabledJesse Brandeburg2-4/+5
The sparse build (C=2) finds some issues with how the driver dealt with the (very difficult) hardware that in some generations uses little-endian, and in others uses big endian, for the VLAN field. The code as written picks __le16 as a type and for some hardware revisions we override it to __be16 as done in this patch. This impacted the VF driver as well so fix it there too. Also change the vlan_tci assignment to override the sparse warning without changing functionality. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Dave Switzer <david.switzer@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-05-26igb/igc: use strongly typed pointerJesse Brandeburg2-2/+2
The igb and igc driver both use a trick of creating a local type pointer on the stack to ease dealing with a receive descriptor in 64 bit chunks for printing. Sparse however was not taken into account and receive descriptors are always in little endian order, so just make the unions use __le64 instead of u64. No functional change. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Dvora Fuxbrumer <dvorax.fuxbrumer@linux.intel.com> Tested-by: Dave Switzer <david.switzer@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-05-26fm10k: move error checkJesse Brandeburg1-5/+5
The error check and set_bit are placed in such a way that sparse (C=2) warns: .../fm10k_pci.c:1395:9: warning: context imbalance in 'fm10k_msix_mbx_pf' - different lock contexts for basic block Which seems a little odd, but the code can obviously be moved to where the variable is being set without changing functionality at all, and it even seems to make a bit more sense with the check closer to the set. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-05-26intel: remove checker warningJesse Brandeburg3-3/+3
The sparse checker (C=2) found an assignment where we were mixing types when trying to convert from data read directly from the device NVM, to an array in CPU order in-memory, which unfortunately the driver tries to do in-place. This is easily solved by using the swap operation instead of an assignment, and is already proven in other Intel drivers to be functionally correct and the same code, just without a sparse warning. The change is the same in all three drivers. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Dave Switzer <david.switzer@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-05-26e100: handle eeprom as little endianJesse Brandeburg1-6/+6
Sparse tool was warning on some implicit conversions from little endian data read from the EEPROM on the e100 cards. Fix these by being explicit about the conversions using le16_to_cpu(). Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2021-05-26net: mvpp2: add buffer header handling in RXStefan Chulski2-9/+67
If Link Partner sends frames larger than RX buffer size, MAC mark it as oversize but still would pass it to the Packet Processor. In this scenario, Packet Processor scatter frame between multiple buffers, but only a single buffer would be returned to the Buffer Manager pool and it would not refill the poll. Patch add handling of oversize error with buffer header handling, so all buffers would be returned to the Buffer Manager pool. Fixes: 3f518509dedc ("ethernet: Add new driver for Marvell Armada 375 network unit") Reported-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Stefan Chulski <stefanc@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-26bnx2x: Fix missing error code in bnx2x_iov_init_one()Jiapeng Chong1-1/+3
Eliminate the follow smatch warning: drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c:1227 bnx2x_iov_init_one() warn: missing error code 'err'. Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-26net: zero-initialize tc skb extension on allocationVlad Buslov2-2/+2
Function skb_ext_add() doesn't initialize created skb extension with any value and leaves it up to the user. However, since extension of type TC_SKB_EXT originally contained only single value tc_skb_ext->chain its users used to just assign the chain value without setting whole extension memory to zero first. This assumption changed when TC_SKB_EXT extension was extended with additional fields but not all users were updated to initialize the new fields which leads to use of uninitialized memory afterwards. UBSAN log: [ 778.299821] UBSAN: invalid-load in net/openvswitch/flow.c:899:28 [ 778.301495] load of value 107 is not a valid value for type '_Bool' [ 778.303215] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.12.0-rc7+ #2 [ 778.304933] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 [ 778.307901] Call Trace: [ 778.308680] <IRQ> [ 778.309358] dump_stack+0xbb/0x107 [ 778.310307] ubsan_epilogue+0x5/0x40 [ 778.311167] __ubsan_handle_load_invalid_value.cold+0x43/0x48 [ 778.312454] ? memset+0x20/0x40 [ 778.313230] ovs_flow_key_extract.cold+0xf/0x14 [openvswitch] [ 778.314532] ovs_vport_receive+0x19e/0x2e0 [openvswitch] [ 778.315749] ? ovs_vport_find_upcall_portid+0x330/0x330 [openvswitch] [ 778.317188] ? create_prof_cpu_mask+0x20/0x20 [ 778.318220] ? arch_stack_walk+0x82/0xf0 [ 778.319153] ? secondary_startup_64_no_verify+0xb0/0xbb [ 778.320399] ? stack_trace_save+0x91/0xc0 [ 778.321362] ? stack_trace_consume_entry+0x160/0x160 [ 778.322517] ? lock_release+0x52e/0x760 [ 778.323444] netdev_frame_hook+0x323/0x610 [openvswitch] [ 778.324668] ? ovs_netdev_get_vport+0xe0/0xe0 [openvswitch] [ 778.325950] __netif_receive_skb_core+0x771/0x2db0 [ 778.327067] ? lock_downgrade+0x6e0/0x6f0 [ 778.328021] ? lock_acquire+0x565/0x720 [ 778.328940] ? generic_xdp_tx+0x4f0/0x4f0 [ 778.329902] ? inet_gro_receive+0x2a7/0x10a0 [ 778.330914] ? lock_downgrade+0x6f0/0x6f0 [ 778.331867] ? udp4_gro_receive+0x4c4/0x13e0 [ 778.332876] ? lock_release+0x52e/0x760 [ 778.333808] ? dev_gro_receive+0xcc8/0x2380 [ 778.334810] ? lock_downgrade+0x6f0/0x6f0 [ 778.335769] __netif_receive_skb_list_core+0x295/0x820 [ 778.336955] ? process_backlog+0x780/0x780 [ 778.337941] ? mlx5e_rep_tc_netdevice_event_unregister+0x20/0x20 [mlx5_core] [ 778.339613] ? seqcount_lockdep_reader_access.constprop.0+0xa7/0xc0 [ 778.341033] ? kvm_clock_get_cycles+0x14/0x20 [ 778.342072] netif_receive_skb_list_internal+0x5f5/0xcb0 [ 778.343288] ? __kasan_kmalloc+0x7a/0x90 [ 778.344234] ? mlx5e_handle_rx_cqe_mpwrq+0x9e0/0x9e0 [mlx5_core] [ 778.345676] ? mlx5e_xmit_xdp_frame_mpwqe+0x14d0/0x14d0 [mlx5_core] [ 778.347140] ? __netif_receive_skb_list_core+0x820/0x820 [ 778.348351] ? mlx5e_post_rx_mpwqes+0xa6/0x25d0 [mlx5_core] [ 778.349688] ? napi_gro_flush+0x26c/0x3c0 [ 778.350641] napi_complete_done+0x188/0x6b0 [ 778.351627] mlx5e_napi_poll+0x373/0x1b80 [mlx5_core] [ 778.352853] __napi_poll+0x9f/0x510 [ 778.353704] ? mlx5_flow_namespace_set_mode+0x260/0x260 [mlx5_core] [ 778.355158] net_rx_action+0x34c/0xa40 [ 778.356060] ? napi_threaded_poll+0x3d0/0x3d0 [ 778.357083] ? sched_clock_cpu+0x18/0x190 [ 778.358041] ? __common_interrupt+0x8e/0x1a0 [ 778.359045] __do_softirq+0x1ce/0x984 [ 778.359938] __irq_exit_rcu+0x137/0x1d0 [ 778.360865] irq_exit_rcu+0xa/0x20 [ 778.361708] common_interrupt+0x80/0xa0 [ 778.362640] </IRQ> [ 778.363212] asm_common_interrupt+0x1e/0x40 [ 778.364204] RIP: 0010:native_safe_halt+0xe/0x10 [ 778.365273] Code: 4f ff ff ff 4c 89 e7 e8 50 3f 40 fe e9 dc fe ff ff 48 89 df e8 43 3f 40 fe eb 90 cc e9 07 00 00 00 0f 00 2d 74 05 62 00 fb f4 <c3> 90 e9 07 00 00 00 0f 00 2d 64 05 62 00 f4 c3 cc cc 0f 1f 44 00 [ 778.369355] RSP: 0018:ffffffff84407e48 EFLAGS: 00000246 [ 778.370570] RAX: ffff88842de46a80 RBX: ffffffff84425840 RCX: ffffffff83418468 [ 778.372143] RDX: 000000000026f1da RSI: 0000000000000004 RDI: ffffffff8343af5e [ 778.373722] RBP: fffffbfff0884b08 R08: 0000000000000000 R09: ffff88842de46bcb [ 778.375292] R10: ffffed1085bc8d79 R11: 0000000000000001 R12: 0000000000000000 [ 778.376860] R13: ffffffff851124a0 R14: 0000000000000000 R15: dffffc0000000000 [ 778.378491] ? rcu_eqs_enter.constprop.0+0xb8/0xe0 [ 778.379606] ? default_idle_call+0x5e/0xe0 [ 778.380578] default_idle+0xa/0x10 [ 778.381406] default_idle_call+0x96/0xe0 [ 778.382350] do_idle+0x3d4/0x550 [ 778.383153] ? arch_cpu_idle_exit+0x40/0x40 [ 778.384143] cpu_startup_entry+0x19/0x20 [ 778.385078] start_kernel+0x3c7/0x3e5 [ 778.385978] secondary_startup_64_no_verify+0xb0/0xbb Fix the issue by providing new function tc_skb_ext_alloc() that allocates tc skb extension and initializes its memory to 0 before returning it to the caller. Change all existing users to use new API instead of calling skb_ext_add() directly. Fixes: 038ebb1a713d ("net/sched: act_ct: fix miss set mru for ovs after defrag in act_ct") Fixes: d29334c15d33 ("net/sched: act_api: fix miss set post_ct for ovs after do conntrack in act_ct") Signed-off-by: Vlad Buslov <vladbu@nvidia.com> Acked-by: Cong Wang <cong.wang@bytedance.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-26net: hns: Fix kernel-docYang Li1-3/+3
Fix function name in hns_ethtool.c kernel-doc comment to remove these warnings found by clang_w1. drivers/net/ethernet/hisilicon/hns/hns_ethtool.c:202: warning: expecting prototype for hns_nic_set_link_settings(). Prototype was for hns_nic_set_link_ksettings() instead. drivers/net/ethernet/hisilicon/hns/hns_ethtool.c:837: warning: expecting prototype for get_ethtool_stats(). Prototype was for hns_get_ethtool_stats() instead. drivers/net/ethernet/hisilicon/hns/hns_ethtool.c:894: warning: expecting prototype for get_strings(). Prototype was for hns_get_strings() instead. Reported-by: Abaci Robot <abaci@linux.alibaba.com> Fixes: 'commit 262b38cdb3e4 ("net: ethernet: hisilicon: hns: use phydev from struct net_device")' Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-26net: hns3: switch to dim algorithm for adaptive interrupt moderationHuazhong Tan3-125/+73
The Linux kernel has support for a dynamic interrupt moderation algorithm known as "dimlib". Replace the custom driver-specific implementation of dynamic interrupt moderation with the kernel's algorithm. Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-24net: hns3: use HCLGE_VPORT_STATE_PROMISC_CHANGE to replace ↵Jian Shen2-7/+6
HCLGE_STATE_PROMISC_CHANGED Currently, PF is using HCLGE_STATE_PROMISC_CHANGED to indicate need synchronize the promisc mode for itself, and using flag HCLGE_VPORT_STATE_PROMISC_CHANGE for its VF. To keep consistent, remove flag HCLGE_STATE_PROMISC_CHANGED, and use flag HCLGE_VPORT_STATE_PROMISC_CHANGE instead. Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-24net: hns3: configure promisc mode for VF asynchronouslyJian Shen3-46/+42
Currently, when host set VF untrusted, the driver will disable the promisc mode of VF. It may be conflicted when the VF requests the host to set promisc mode. So refactor it by changing promisc mode for VF asynchronously. With this change, the promisc mode of VF can be restored when the VF being trusted again. Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-24ethernet: ucc_geth: Use kmemdup() rather than kmalloc+memcpyYueHaibing1-2/+1
Issue identified with Coccinelle. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-24net: r6040: Allow restarting auto-negotiationFlorian Fainelli1-0/+1
Use phy_ethtool_nway_reset() since the driver makes use of the PHY library. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-24net: r6040: Use ETH_FCS_LENFlorian Fainelli1-2/+2
Instead of the open coded constant 4. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-24net: r6040: Use logical or for MDIO operationsFlorian Fainelli1-2/+2
This is not a functional change, but we should be using a logical or to assign the bits we will be writing to the MDIO read and write registers. Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-24ehea: Use DEVICE_ATTR_*() macroYueHaibing1-9/+9
Use DEVICE_ATTR_*() helper instead of plain DEVICE_ATTR, which makes the code a bit shorter and easier to read. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-24sfc: falcon: use DEVICE_ATTR_*() macroYueHaibing2-7/+7
Use DEVICE_ATTR_*() helper instead of plain DEVICE_ATTR, which makes the code a bit shorter and easier to read. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-24sfc: use DEVICE_ATTR_*() macroYueHaibing3-17/+18
Use DEVICE_ATTR_*() helper instead of plain DEVICE_ATTR, which makes the code a bit shorter and easier to read. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-24net: ftgmac100: add missing error return code in ftgmac100_probe()Yang Yingliang1-1/+5
The variables will be free on path err_phy_connect, it should return error code, or it will cause double free when calling ftgmac100_remove(). Fixes: bd466c3fb5a4 ("net/faraday: Support NCSI mode") Fixes: 39bfab8844a0 ("net: ftgmac100: Add support for DT phy-handle property") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-24net: macb: ensure the device is available before accessing GEMGXL control ↵Zong Li1-0/+3
registers If runtime power menagement is enabled, the gigabit ethernet PLL would be disabled after macb_probe(). During this period of time, the system would hang up if we try to access GEMGXL control registers. We can't put runtime_pm_get/runtime_pm_put/ there due to the issue of sleep inside atomic section (7fa2955ff70ce453 ("sh_eth: Fix sleeping function called from invalid context"). Add netif_running checking to ensure the device is available before accessing GEMGXL device. Changed in v2: - Use netif_running instead of its own flag Signed-off-by: Zong Li <zong.li@sifive.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-24net: ethernet: mtk_eth_soc: Fix packet statistics support for MT7628/88Stefan Roese2-25/+66
The MT7628/88 SoC(s) have other (limited) packet counter registers than currently supported in the mtk_eth_soc driver. This patch adds support for reading these registers, so that the packet statistics are correctly updated. Additionally the defines for the non-MT7628 variant packet counter registers are added and used in this patch instead of using hard coded values. Signed-off-by: Stefan Roese <sr@denx.de> Fixes: 296c9120752b ("net: ethernet: mediatek: Add MT7628/88 SoC support") Cc: Felix Fietkau <nbd@nbd.name> Cc: John Crispin <john@phrozen.org> Cc: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com> Cc: Reto Schneider <code@reto-schneider.ch> Cc: Reto Schneider <reto.schneider@husqvarnagroup.com> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-22net:sfc: fix non-freed irq in legacy irq modeÍñigo Huguet1-0/+1
SFC driver can be configured via modparam to work using MSI-X, MSI or legacy IRQ interrupts. In the last one, the interrupt was not properly released on module remove. It was not freed because the flag irqs_hooked was not set during initialization in the case of using legacy IRQ. Example of (trimmed) trace during module remove without this fix: remove_proc_entry: removing non-empty directory 'irq/125', leaking at least '0000:3b:00.1' WARNING: CPU: 39 PID: 3658 at fs/proc/generic.c:715 remove_proc_entry+0x15c/0x170 ...trimmed... Call Trace: unregister_irq_proc+0xe3/0x100 free_desc+0x29/0x70 irq_free_descs+0x47/0x70 mp_unmap_irq+0x58/0x60 acpi_unregister_gsi_ioapic+0x2a/0x40 acpi_pci_irq_disable+0x78/0xb0 pci_disable_device+0xd1/0x100 efx_pci_remove+0xa1/0x1e0 [sfc] pci_device_remove+0x38/0xa0 __device_release_driver+0x177/0x230 driver_detach+0xcb/0x110 bus_remove_driver+0x58/0xd0 pci_unregister_driver+0x2a/0xb0 efx_exit_module+0x24/0xf40 [sfc] __do_sys_delete_module.constprop.0+0x171/0x280 ? exit_to_user_mode_prepare+0x83/0x1d0 do_syscall_64+0x3d/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f9f9385800b ...trimmed... Signed-off-by: Íñigo Huguet <ihuguet@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-22dpaa2-eth: don't print error from dpaa2_mac_connect if that's EPROBE_DEFERVladimir Oltean1-3/+4
When booting a board with DPAA2 interfaces defined statically via DPL (as opposed to creating them dynamically using restool), the driver will print an unspecific error message. This change adds the error code to the message, and avoids printing altogether if the error code is EPROBE_DEFER, because that is not a cause of alarm. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-22net: lantiq: fix memory corruption in RX ringAleksander Jan Bajkowski1-5/+9
In a situation where memory allocation or dma mapping fails, an invalid address is programmed into the descriptor. This can lead to memory corruption. If the memory allocation fails, DMA should reuse the previous skb and mapping and drop the packet. This patch also increments rx drop counter. Fixes: fe1a56420cf2 ("net: lantiq: Add Lantiq / Intel VRX200 Ethernet driver ") Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-22dpaa2-eth: name the debugfs directory after the DPNI objectIoana Ciornei1-1/+5
Name the debugfs directory after the DPNI object instead of the netdev name since this can be changed after probe by udev rules. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-22dpaa2-eth: setup the of_node field of the deviceIoana Ciornei2-12/+14
When the DPNI object is connected to a DPMAC, setup the of_node to point to the DTS device node of that specific MAC. This enables other drivers, for example the DSA subsystem, to find the net_device by its device node. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-21net: hns3: Fix return of uninitialized variable retColin Ian King1-0/+1
In the unlikely event that rule_cnt is zero the variable ret is not assigned a value and function hclge_dbg_dump_fd_tcam can end up returning an unitialized value in ret. Fix this by explicitly setting ret to zero before the for-loop. Addresses-Coverity: ("Uninitialized scalar variable") Fixes: b5a0b70d77b9 ("net: hns3: refactor dump fd tcam of debugfs") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-21sfc: farch: fix compile warning in efx_farch_dimension_resources()Yang Yingliang1-6/+7
Fix the following kernel build warning when CONFIG_SFC_SRIOV is disabled: drivers/net/ethernet/sfc/farch.c: In function ‘efx_farch_dimension_resources’: drivers/net/ethernet/sfc/farch.c:1671:21: warning: variable ‘buftbl_min’ set but not used [-Wunused-but-set-variable] unsigned vi_count, buftbl_min, total_tx_channels; Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-21net: ethernet: mtk_eth_soc: Fix DIM support for MT7628/88Stefan Roese1-2/+8
When updating to latest mainline for some testing on the GARDENA smart gateway based on the MT7628, I noticed that ethernet does not work any more. Commit e9229ffd550b ("net: ethernet: mtk_eth_soc: implement dynamic interrupt moderation") introduced this problem, as it missed the RX_DIM & TX_DIM configuration for this SoC variant. This patch fixes this by calling mtk_dim_rx() & mtk_dim_tx() in this case as well. Signed-off-by: Stefan Roese <sr@denx.de> Fixes: e9229ffd550b ("net: ethernet: mtk_eth_soc: implement dynamic interrupt moderation") Cc: Felix Fietkau <nbd@nbd.name> Cc: John Crispin <john@phrozen.org> Cc: Ilya Lipnitskiy <ilya.lipnitskiy@gmail.com> Cc: Reto Schneider <code@reto-schneider.ch> Cc: Reto Schneider <reto.schneider@husqvarnagroup.com> Cc: David S. Miller <davem@davemloft.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-21net: xilinx_emaclite: Do not print real IOMEM pointerYueHaibing1-3/+2
Printing kernel pointers is discouraged because they might leak kernel memory layout. This fixes smatch warning: drivers/net/ethernet/xilinx/xilinx_emaclite.c:1191 xemaclite_of_probe() warn: argument 4 to %08lX specifier is cast from pointer Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-21Merge 50f09a3dd587 ("Merge tag 'char-misc-5.13-rc3' of ↵Greg Kroah-Hartman6-36/+65
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc") into char-misc-next We want the char/misc driver fixes in here as well Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-21net: stmmac: fix system hang if change mac address after interface ifdownJoakim Zhang1-1/+10
Fix system hang with below sequences: ~# ifconfig ethx down ~# ifconfig ethx hw ether xx:xx:xx:xx:xx:xx After ethx down, stmmac all clocks gated off and then register access causes system hang. Fixes: 5ec55823438e ("net: stmmac: add clocks management for gmac driver") Signed-off-by: Joakim Zhang <qiangqing.zhang@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-20 23:11:05 +0300