summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/realtek
AgeCommit message (Collapse)AuthorFilesLines
2016-03-02r8169: Enable RX_MULTI_EN for RTL_GIGA_MAC_VER_41~48Chunhao Lin1-4/+0
For RTL8168G/RTL8168H/RTL8411B/RTL8107E, enable this flag to eliminate message "AMD-Vi: Event logged [IO_PAGE_FAULT device=01:00.0 domain=0x0002 address=0x0000000000003000 flags=0x0050] in dmesg. Signed-off-by: Chunhao Lin <hau@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-26r8169:fix "rtl_counters_cond == 1 (loop: 1000, delay: 10)" log spam.Chun-Hao Lin1-2/+12
There will be a log spam when there is no cable plugged. Please refer to following links. https://bugzilla.kernel.org/show_bug.cgi?id=104351 https://bugzilla.kernel.org/show_bug.cgi?id=107421 This issue is caused by runtime power management. When there is no cable plugged, the driver will be suspend (runtime suspend) by OS and NIC will be put into the D3 state. During this time, if OS call rtl8169_get_stats64() to dump tally counter, because NIC is in D3 state, the register value read by driver will return all 0xff. This will let driver think tally counter flag is not toggled and then sends the warning message "rtl_counters_cond == 1 (loop: 1000, delay: 10)" to kernel log. For fixing this issue, 1.add checking driver's pm runtime status in rtl8169_get_stats64(). 2.dump tally counter before going runtime suspend for counter accuracy in runtime suspend. Signed-off-by: Chunhao Lin <hau@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-02-13r8169:fix system hange problem.Chun-Hao Lin1-7/+7
There are typos in setting RTL8168H hardware parameters. If system install another version driver that may cuase system hang. Signed-off-by: Chunhao Lin <hau@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-05r8169:Correct the way of setting RTL8168DP ephyChun-Hao Lin1-11/+4
The original way is wrong, it always writes ephy reg 0x03. Signed-off-by: Chunhao Lin <hau@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-05r8169:Fix typo in setting RTL8168H PHY PFM mode.Chun-Hao Lin1-2/+2
The PHY PFM register is in PHY page 0x0a44 register 0x11, not 0x14. Signed-off-by: Chunhao Lin <hau@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-01-05r8169:Fix typo in setting RTL8168EP and RTL8168H D3cold PFM modeChun-Hao Lin1-3/+3
The register for setting D3code PFM mode is MISC_1, not DLLPR. Signed-off-by: Chunhao Lin <hau@realtek.com> Reviewed-by: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-28r8169:Update the way of reading RTL8168H PHY register "rg_saw_cnt"Chun-Hao Lin1-1/+1
The vlaue of RTL8168H PHY register "rg_saw_cnt" only valid from bit0 to bit13. When read this register, add bitwise-anding its value with 0x3fff. Signed-off-by: Chunhao Lin <hau@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-28r8169:Fix typo in setting RTL8168H PHY parameterChun-Hao Lin1-1/+1
In function "rtl8168h_2_hw_phy_config", there is a typo in setting RTL8168H PHY parameter. Signed-off-by: Chunhao Lin <hau@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-11-12r8169: fix kasan reported skb use-after-free.françois romieu1-3/+3
Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Reported-by: Dave Jones <davej@codemonkey.org.uk> Fixes: d7d2d89d4b0af ("r8169: Add software counter for multicast packages") Acked-by: Eric Dumazet <edumazet@google.com> Acked-by: Corinna Vinschen <vinschen@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-16drivers/net: get rid of unnecessary initializations in .get_drvinfo()Ivan Vecera1-1/+0
Many drivers initialize uselessly n_priv_flags, n_stats, testinfo_len, eedump_len & regdump_len fields in their .get_drvinfo() ethtool op. It's not necessary as these fields is filled in ethtool_get_drvinfo(). v2: removed unused variable v3: removed another unused variable Signed-off-by: Ivan Vecera <ivecera@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-1/+1
Conflicts: net/dsa/slave.c net/dsa/slave.c simply had overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-27r8169: fix handling rtl_readphy resultAndrzej Hajda1-1/+1
The function can return negative value. The problem has been detected using proposed semantic patch scripts/coccinelle/tests/assign_signed_to_unsigned.cocci [1]. [1]: http://permalink.gmane.org/gmane.linux.kernel/2046107 Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-278139cp: Fix GSO MSS handlingDavid Woodhouse1-2/+18
When fixing the TSO support I noticed we just mask ->gso_size with the MSSMask value and don't care about the consequences. Provide a .ndo_features_check() method which drops the NETIF_F_TSO feature for any skb which would exceed the maximum, and thus forces it to be segmented by software. Then we can stop the masking in cp_start_xmit(), and just WARN if the maximum is exceeded, which should now never happen. Finally, Francois Romieu noticed that we didn't even have the right value for MSSMask anyway; it should be 0x7ff (11 bits) not 0xfff. Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-278139cp: Enable offload features by defaultDavid Woodhouse1-2/+2
I fixed TSO. Hardware checksum and scatter/gather also appear to be working correctly both on real hardware and in QEMU's emulation. Let's enable them by default and see if anyone screams... Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-248139cp: Dump contents of descriptor ring on TX timeoutDavid Woodhouse1-1/+13
We are seeing unexplained TX timeouts under heavy load. Let's try to get a better idea of what's going on. Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-248139cp: Fix DMA unmapping of transmitted buffersDavid Woodhouse1-1/+8
The low 16 bits of the 'opts1' field in the TX descriptor are supposed to still contain the buffer length when the descriptor is handed back to us. In practice, at least on my hardware, they don't. So stash the original value of the opts1 field and get the length to unmap from there. There are other ways we could have worked out the length, but I actually want a stash of the opts1 field anyway so that I can dump it alongside the contents of the descriptor ring when we suffer a TX timeout. Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-248139cp: Reduce duplicate csum/tso code in cp_start_xmit()David Woodhouse1-41/+20
We calculate the value of the opts1 descriptor field in three different places. With two different behaviours when given an invalid packet to be checksummed — none of them correct. Sort that out. Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-248139cp: Fix TSO/scatter-gather descriptor setupDavid Woodhouse1-12/+10
When sending a TSO frame in multiple buffers, we were neglecting to set the first descriptor up in TSO mode. Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-248139cp: Fix tx_queued debug message to print correct slot numbersDavid Woodhouse1-7/+8
After a certain amount of staring at the debug output of this driver, I realised it was lying to me. Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-248139cp: Do not re-enable RX interrupts in cp_tx_timeout()David Woodhouse1-1/+2
If an RX interrupt was already received but NAPI has not yet run when the RX timeout happens, we end up in cp_tx_timeout() with RX interrupts already disabled. Blindly re-enabling them will cause an IRQ storm. (This is made particularly horrid by the fact that cp_interrupt() always returns that it's handled the interrupt, even when it hasn't actually done anything. If it didn't do that, the core IRQ code would have detected the storm and handled it, I'd have had a clear smoking gun backtrace instead of just a spontaneously resetting router, and I'd have at *least* two days of my life back. Changing the return value of cp_interrupt() will be argued about under separate cover.) Unconditionally leave RX interrupts disabled after the reset, and schedule NAPI to check the receive ring and re-enable them. Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-218139cp: Call __cp_set_rx_mode() from cp_tx_timeout()David Woodhouse1-0/+1
Unless we reset the RX config, on real hardware I don't seem to receive any packets after a TX timeout. Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-218139cp: Use dev_kfree_skb_any() instead of dev_kfree_skb() in cp_clean_rings()David Woodhouse1-2/+2
This can be called from cp_tx_timeout() with interrupts disabled. Spotted by Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-10r8169: Fix sleeping function called during get_stats64, v2Corinna Vinschen1-83/+54
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=104031 Fixes: 6e85d5ad36a26debc23a9a865c029cbe242b2dc8 Based on the discussion starting at http://www.spinics.net/lists/netdev/msg342193.html Tested locally on RTL8168evl/8111evl with various concurrent processes accessing /proc/net/dev while changing the link state as well as removing/reloading the r8169 module. Signed-off-by: Corinna Vinschen <vinschen@redhat.com> Tested-by: poma <pomidorabelisima@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-28r8169: Add software counter for multicast packagesCorinna Vinschen1-5/+4
The multicast hardware counter on 8168/8111 chips is only 32 bit while the statistics in struct rtnl_link_stats64 are 64 bit. Given that statistics are requested on an irregular basis, an overflow of the hardware counter can go unnoticed. To count even very large numbers of multicast packets reliably, add a software counter and remove previously applied code to fill the multicast field requested by @rtl8169_get_stats64 with the values read from the rx_multicast hardware counter. Signed-off-by: Corinna Vinschen <vinschen@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-26r8169: Add values missing in @get_stats64 from HW countersCorinna Vinschen1-14/+149
The r8169 driver collects statistical information returned by @get_stats64 by counting them in the driver itself, even though many (but not all) of the values are already collected by tally counters (TCs) in the NIC. Some of these TC values are not returned by @get_stats64. Especially the received multicast packages are missing from /proc/net/dev. Rectify this by fetching the TCs and returning them from rtl8169_get_stats64. The counters collected in the driver obviously disappear as soon as the driver is unloaded so after a driver is loaded the counters always start at 0. The TCs on the other hand are only reset by a power cycle. Without further considerations the values collected by the driver would not match up against the TC values. This patch introduces a new function rtl8169_reset_counters which resets the TCs. Also, since rtl8169_reset_counters shares most of its code with rtl8169_update_counters, refactor the shared code into two new functions rtl8169_map_counters and rtl8169_unmap_counters. Unfortunately chip versions prior to RTL_GIGA_MAC_VER_19 don't allow to reset the TCs programatically. Therefore introduce an addition to the rtl8169_private struct and a function rtl8169_init_counter_offsets to store the TCs at first rtl_open. Use these values as offsets in rtl8169_get_stats64. Propagate a failure to reset *and* update the counters up to rtl_open and emit a warning message, if so. Signed-off-by: Corinna Vinschen <vinschen@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-08-07r8169: enforce RX_MULTI_EN on rtl8168ep/8111ep chipsIvan Vecera1-1/+3
Enforcing this flag in RxConfig for the mentioned chips fixes netdev watchdog issues prepended with AMD IOMMU message(s) like: AMD-Vi: Event logged [IO_PAGE_FAULT device=01:00.0 domain=0x001d address=0x0000000000003000 flags=0x0050] Note that this flag is also set in Realtek's own driver for these chips. Signed-off-by: Ivan Vecera <ivecera@redhat.com> Tested-by: Alexander Lindqvist <alexander@bitspace.se> Acked-by: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-06-23drivers/net: remove all references to obsolete Ethernet-HOWTOPaul Gortmaker1-10/+4
This howto made sense in the 1990s when users had to manually configure ISA cards with jumpers or vendor utilities, but with the implementation of PCI it became increasingly less and less relevant, to the point where it has been well over a decade since I last updated it. And there is no value in anyone else taking over updating it either. However the references to it continue to spread as boiler plate text from one Kconfig file into the next. We are not doing end users any favours by pointing them at this old document, so lets kill it with fire, once and for all, to hopefully stop any further spread. No code is changed in this commit, just Kconfig help text. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-04r8169: Do not use dev_kfree_skb in xmit pathAlexander Duyck1-2/+2
The function r8169_csum_workaround is called in the ndo_start_xmit path of the r8169 driver. As such it should not be using dev_kfree_skb as it is not irq safe, so instead we should be using dev_kfree_skb_any for freeing in the dropped path, and dev_consume_skb_any for any frames that were transmitted. Signed-off-by: Alexander Duyck <alexander.h.duyck@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-25r8169: Fix trivial typo in rtl_check_firmwareYannick Guerrini1-1/+1
Change 'firwmare' to 'firmware' Signed-off-by: Yannick Guerrini <yguerrini@tomshardware.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-22r8169: Revert BQL and xmit_more support.David S. Miller1-23/+7
There are certain regressions which are pointing to these two commits which we are having a hard time resolving. So revert them for now. Specifically this reverts: commit 0bec3b700d106a8b0a34227b2976d1a582f1aab7 Author: Florian Westphal <fw@strlen.de> Date: Wed Jan 7 10:49:49 2015 +0100 r8169: add support for xmit_more and commit 1e918876853aa85435e0f17fd8b4a92dcfff53d6 Author: Florian Westphal <fw@strlen.de> Date: Wed Oct 1 13:38:03 2014 +0200 r8169: add support for Byte Queue Limits There were some attempts by Eric Dumazet to address some obvious problems in the TX flow, to see if they would fix the problems, but none of them seem to help for the regression reporters. Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-11Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds2-7/+13
Pull networking updates from David Miller: 1) More iov_iter conversion work from Al Viro. [ The "crypto: switch af_alg_make_sg() to iov_iter" commit was wrong, and this pull actually adds an extra commit on top of the branch I'm pulling to fix that up, so that the pre-merge state is ok. - Linus ] 2) Various optimizations to the ipv4 forwarding information base trie lookup implementation. From Alexander Duyck. 3) Remove sock_iocb altogether, from CHristoph Hellwig. 4) Allow congestion control algorithm selection via routing metrics. From Daniel Borkmann. 5) Make ipv4 uncached route list per-cpu, from Eric Dumazet. 6) Handle rfs hash collisions more gracefully, also from Eric Dumazet. 7) Add xmit_more support to r8169, e1000, and e1000e drivers. From Florian Westphal. 8) Transparent Ethernet Bridging support for GRO, from Jesse Gross. 9) Add BPF packet actions to packet scheduler, from Jiri Pirko. 10) Add support for uniqu flow IDs to openvswitch, from Joe Stringer. 11) New NetCP ethernet driver, from Muralidharan Karicheri and Wingman Kwok. 12) More sanely handle out-of-window dupacks, which can result in serious ACK storms. From Neal Cardwell. 13) Various rhashtable bug fixes and enhancements, from Herbert Xu, Patrick McHardy, and Thomas Graf. 14) Support xmit_more in be2net, from Sathya Perla. 15) Group Policy extensions for vxlan, from Thomas Graf. 16) Remove Checksum Offload support for vxlan, from Tom Herbert. 17) Like ipv4, support lockless transmit over ipv6 UDP sockets. From Vlad Yasevich. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1494+1 commits) crypto: fix af_alg_make_sg() conversion to iov_iter ipv4: Namespecify TCP PMTU mechanism i40e: Fix for stats init function call in Rx setup tcp: don't include Fast Open option in SYN-ACK on pure SYN-data openvswitch: Only set TUNNEL_VXLAN_OPT if VXLAN-GBP metadata is set ipv6: Make __ipv6_select_ident static ipv6: Fix fragment id assignment on LE arches. bridge: Fix inability to add non-vlan fdb entry net: Mellanox: Delete unnecessary checks before the function call "vunmap" cxgb4: Add support in cxgb4 to get expansion rom version via ethtool ethtool: rename reserved1 memeber in ethtool_drvinfo for expansion ROM version net: dsa: Remove redundant phy_attach() IB/mlx4: Reset flow support for IB kernel ULPs IB/mlx4: Always use the correct port for mirrored multicast attachments net/bonding: Fix potential bad memory access during bonding events tipc: remove tipc_snprintf tipc: nl compat add noop and remove legacy nl framework tipc: convert legacy nl stats show to nl compat tipc: convert legacy nl net id get to nl compat tipc: convert legacy nl net id set to nl compat ...
2015-02-11Merge tag 'pci-v3.20-changes' of ↵Linus Torvalds1-3/+3
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI changes from Bjorn Helgaas: "Enumeration - Move domain assignment from arm64 to generic code (Lorenzo Pieralisi) - ARM: Remove artificial dependency on pci_sys_data domain (Lorenzo Pieralisi) - ARM: Move to generic PCI domains (Lorenzo Pieralisi) - Generate uppercase hex for modalias var in uevent (Ricardo Ribalda Delgado) - Add and use generic config accessors on ARM, PowerPC (Rob Herring) Resource management - Free resources on failure in of_pci_get_host_bridge_resources() (Lorenzo Pieralisi) - Fix infinite loop with ROM image of size 0 (Michel Dänzer) PCI device hotplug - Handle surprise add even if surprise removal isn't supported (Bjorn Helgaas) Virtualization - Mark AMD/ATI VGA devices that don't reset on D3hot->D0 transition (Alex Williamson) - Add DMA alias quirk for Adaptec 3405 (Alex Williamson) - Add Wellsburg (X99) to Intel PCH root port ACS quirk (Alex Williamson) - Add ACS quirk for Emulex NICs (Vasundhara Volam) MSI - Fail MSI-X mappings if there's no space assigned to MSI-X BAR (Yijing Wang) Freescale Layerscape host bridge driver - Fix platform_no_drv_owner.cocci warnings (Julia Lawall) NVIDIA Tegra host bridge driver - Remove unnecessary tegra_pcie_fixup_bridge() (Lucas Stach) Renesas R-Car host bridge driver - Fix error handling of irq_of_parse_and_map() (Dmitry Torokhov) TI Keystone host bridge driver - Fix error handling of irq_of_parse_and_map() (Dmitry Torokhov) - Fix misspelling of current function in debug output (Julia Lawall) Xilinx AXI host bridge driver - Fix harmless format string warning (Arnd Bergmann) Miscellaneous - Use standard parsing functions for ASPM sysfs setters (Chris J Arges) - Add pci_device_to_OF_node() stub for !CONFIG_OF (Kevin Hao) - Delete unnecessary NULL pointer checks (Markus Elfring) - Add and use defines for PCIe Max_Read_Request_Size (Rafał Miłecki) - Include clk.h instead of clk-private.h (Stephen Boyd)" * tag 'pci-v3.20-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (48 commits) PCI: Add pci_device_to_OF_node() stub for !CONFIG_OF PCI: xilinx: Convert to use generic config accessors PCI: xgene: Convert to use generic config accessors PCI: tegra: Convert to use generic config accessors PCI: rcar: Convert to use generic config accessors PCI: generic: Convert to use generic config accessors powerpc/powermac: Convert PCI to use generic config accessors powerpc/fsl_pci: Convert PCI to use generic config accessors ARM: ks8695: Convert PCI to use generic config accessors ARM: sa1100: Convert PCI to use generic config accessors ARM: integrator: Convert PCI to use generic config accessors PCI: versatile: Add DT-based ARM Versatile PB PCIe host driver ARM: dts: versatile: add PCI controller binding of/pci: Free resources on failure in of_pci_get_host_bridge_resources() PCI: versatile: Add DT docs for ARM Versatile PB PCIe driver PCI: Fail MSI-X mappings if there's no space assigned to MSI-X BAR r8169: use PCI define for Max_Read_Request_Size [SCSI] esas2r: use PCI define for Max_Read_Request_Size tile: use PCI define for Max_Read_Request_Size rapidio/tsi721: use PCI define for Max_Read_Request_Size ...
2015-01-27r8169: use PCI define for Max_Read_Request_SizeRafał Miłecki1-3/+3
Replace a magic number with a PCI #define symbol. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: David S. Miller <davem@davemloft.net>
2015-01-14net: rename vlan_tx_* helpers since "tx" is misleading thereJiri Pirko2-4/+4
The same macros are used for rx as well. So rename it. Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-09r8169: add support for xmit_moreFlorian Westphal1-3/+9
Delay update of hw tail descriptor if we know that another skb is going to be sent. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-238139too: Add netif_napi_del in the driverJia-Ju Bai1-0/+2
For linux-3.18.0 The driver lacks netif_napi_del in the normal path and error path to match the call of netif_napi_add in rtl8139_init_one. This patch fixes this problem. Signed-off-by: Jia-Ju Bai <baijiaju1990@163.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-238139too: Fix the lack of pci_disable_deviceJia-Ju Bai1-1/+1
For linux-3.18.0 When pci_request_regions is failed in rtl8139_init_board, pci_disable_device is not called to disable the device which are enabled by pci_enable_device, because of disable_dev_on_err is not assigned 1. This patch fix this problem. Signed-off-by: Jia-Ju Bai <baijiaju1990@163.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-12r8169:update rtl8168g pcie ephy parameterChun-Hao Lin1-3/+21
Add ephy parameter to rtl8168g. Also change the common function of rtl8168g from "rtl_hw_start_8168g_1" to "rtl_hw_start_8168g". And function "rtl_hw_start_8168g_1" is used for setting rtl8168g hardware parameters. Following is the explanation of what hardware parameter change for. rtl8168g may erroneous judge the PCIe signal quality and show the error bit on PCI configuration space when in PCIe low power mode. The following ephy parameters are for above issue. { 0x00, 0x0000, 0x0008 } { 0x0c, 0x37d0, 0x0820 } { 0x1e, 0x0000, 0x0001 } rtl8168g may return to PCIe L0 from PCIe L0s low power mode too slow. The following ephy parameter is for above issue. { 0x19, 0x8000, 0x0000 } Signed-off-by: Chunhao Lin <hau@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-12r8169: Use dma_rmb() and dma_wmb() for DescOwn checksAlexander Duyck1-8/+21
The r8169 use a pair of wmb() calls when setting up the descriptor rings. The first is to synchronize the descriptor data with the descriptor status, and the second is to synchronize the descriptor status with the use of the MMIO doorbell to notify the device that descriptors are ready. This can come at a heavy price on some systems, and is not really necessary on systems such as x86 as a simple barrier() would suffice to order store/store accesses. As such we can replace the first memory barrier with dma_wmb() to reduce the cost for these accesses. In addition the r8169 uses a rmb() to prevent compiler optimization in the cleanup paths, however by moving the barrier down a few lines and replacing it with a dma_rmb() we should be able to use it to guarantee descriptor accesses do not occur until the device has updated the DescOwn bit from its end. One last change I made is to move the update of cur_tx in the xmit path to after the wmb. This way we can guarantee the device and all CPUs should see the DescOwn update before they see the cur_tx value update. Cc: Realtek linux nic maintainers <nic_swsd@realtek.com> Cc: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: Alexander Duyck <alexander.h.duyck@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-10ethernet/realtek: use napi_alloc_skb instead of netdev_alloc_skb_ip_alignAlexander Duyck3-3/+3
This replaces most of the calls to netdev_alloc_skb_ip_align in the Realtek drivers. The one instance I didn't replace in 8139cp.c is because it was called as a part of init and as such is not always accessed from the softirq context. Cc: Realtek linux nic maintainers <nic_swsd@realtek.com> Signed-off-by: Alexander Duyck <alexander.h.duyck@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-09r8169: Use eth_skb_pad functionAlexander Duyck1-10/+2
Replace rtl_skb_pad with eth_skb_pad since they do the same thing. Cc: Realtek linux nic maintainers <nic_swsd@realtek.com> Signed-off-by: Alexander Duyck <alexander.h.duyck@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-09r8169:disable rtl8168ep cmac engineChun-Hao Lin1-8/+22
Cmac engine is the bridge between driver and dash firmware. Other os may not disable cmac when leave. And r8169 did not allocate any resources for cmac engine. Disable it to prevent abnormal system behavior. Signed-off-by: Chunhao Lin <hau@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-12-09r8169:prevent enable hardware tx/rx too earlyChun-Hao Lin1-3/+0
For RTL8168G/GU/H/EP and RTL8411B remove enable tx/rx from its own hw_start function. This will prevent enable tx/rx before complete hardware tx/rx setting. Tx/Rx will be enabled in the end of function rtl_hw_start_8168. Signed-off-by: Chunhao Lin <hau@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-248139too: The maximum MTU should allow for VLAN headersAlban Bedel1-3/+4
As pointed out by Ben Hutchings drivers that allow using VLAN have to provide enough headroom for the VLAN tags. Signed-off-by: Alban Bedel <albeu@free.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-108139too: Allow using the largest possible MTUAlban Bedel1-1/+1
This driver allows MTU up to 1518 bytes which is not enought to run batman-adv. Simply raise the maximum packet size up to the maximum allowed by the transmit descriptor, 1792 bytes, giving a maximum MTU of 1774 bytes. Signed-off-by: Alban Bedel <albeu@free.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-108139too: Allow setting MTU larger than 1500Alban Bedel1-1/+12
Replace the default ndo_change_mtu callback with one that allow setting MTU that the driver can handle. Signed-off-by: Alban Bedel <albeu@free.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-29net: ethernet: realtek: atp: checkpatch errors and warnings correctedRoberto Medina1-119/+127
Several warnings and errors of coding style rules corrected. Compile tested. Signed-off-by: Roberto Medina <robertoxmed@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-08r8169:add support for RTL8168EPChun-Hao Lin1-44/+517
RTL8168EP is Realtek PCIe Gigabit Ethernet controller with DASH support. It is a successor chip of RTL8168DP. For RTL8168EP, the read/write ocp register is via eri channel type 2, so I move ocp_xxx() related functions under rtl_eri_xxx. And use r8168dp_ocp_xxx() for RTL8168DP ocp read/write, r8168ep_ocp_xxx() for RTL8168EP ocp read/write. The way of checking dash enable is different with RTL8168DP. I use r8168dp_check_dash()for RTL8168DP and r8168ep_check_dash() for RTL8168EP, to check if dash is enabled. The driver_start() and driver_stop() of RTL8168EP is also different with RTL8168DP. I use rtl8168dp_driver_xxx() for RTL8168DP and rtl8168ep_driver_xxx for RTL8168EP. Right now, RTL8168EP phy mcu did not need firmware code patch, so I did not add firmware code for it. so I did not add firmware code for it. Signed-off-by: Chun-Hao Lin <hau@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-02r8169: add support for Byte Queue LimitsFlorian Westphal1-4/+14
tested on RTL8168d/8111d model using 'super_netperf 40' with TCP/UDP_STREAM. Output of while true; do for n in inflight limit; do echo -n $n\ ; cat $n; done; sleep 1; done during netperf run, 100mbit peer: inflight 0 limit 3028 inflight 6056 limit 4542 [ trimmed output for brevity, no limit/inflight changes during test steady-state ] limit 4542 inflight 3028 limit 6122 inflight 0 limit 6122 [ changed cable to 1gbit peer, restart netperf ] inflight 37850 limit 36336 inflight 33308 limit 31794 inflight 33308 limit 31794 inflight 27252 limit 25738 [ again, no changes during test ] inflight 27252 limit 25738 inflight 0 limit 28766 [ change cable to 100mbit peer, restart netperf ] limit 28766 inflight 27370 limit 28766 inflight 4542 limit 5990 inflight 6056 limit 4542 [ .. ] inflight 6056 limit 4542 inflight 0 [end of test] Cc: Francois Romieu <romieu@fr.zoreil.com> Cc: Hayes Wang <hayeswang@realtek.com> Signed-off-by: Florian Westphal <fw@strlen.de> Acked-by: Eric Dumazet <edumazet@google.com> Acked-by: Tom Herbert <therbert@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-01r8169:call "rtl8168_driver_start" "rtl8168_driver_stop" only when hardware ↵Chun-Hao Lin1-6/+8
dash function is enabled These two functions are used to inform dash firmware that driver is been brought up or brought down. So call these two functions only when hardware dash function is enabled. Signed-off-by: Chun-Hao Lin <hau@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>