summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
AgeCommit message (Collapse)AuthorFilesLines
2020-12-04Merge https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextJakub Kicinski1-2/+2
Alexei Starovoitov says: ==================== pull-request: bpf-next 2020-12-03 The main changes are: 1) Support BTF in kernel modules, from Andrii. 2) Introduce preferred busy-polling, from Björn. 3) bpf_ima_inode_hash() and bpf_bprm_opts_set() helpers, from KP Singh. 4) Memcg-based memory accounting for bpf objects, from Roman. 5) Allow bpf_{s,g}etsockopt from cgroup bind{4,6} hooks, from Stanislav. * https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (118 commits) selftests/bpf: Fix invalid use of strncat in test_sockmap libbpf: Use memcpy instead of strncpy to please GCC selftests/bpf: Add fentry/fexit/fmod_ret selftest for kernel module selftests/bpf: Add tp_btf CO-RE reloc test for modules libbpf: Support attachment of BPF tracing programs to kernel modules libbpf: Factor out low-level BPF program loading helper bpf: Allow to specify kernel module BTFs when attaching BPF programs bpf: Remove hard-coded btf_vmlinux assumption from BPF verifier selftests/bpf: Add CO-RE relocs selftest relying on kernel module BTF selftests/bpf: Add support for marking sub-tests as skipped selftests/bpf: Add bpf_testmod kernel module for testing libbpf: Add kernel module BTF support for CO-RE relocations libbpf: Refactor CO-RE relocs to not assume a single BTF object libbpf: Add internal helper to load BTF data by FD bpf: Keep module's btf_data_size intact after load bpf: Fix bpf_put_raw_tracepoint()'s use of __module_address() selftests/bpf: Add Userspace tests for TCP_WINDOW_CLAMP bpf: Adds support for setting window clamp samples/bpf: Fix spelling mistake "recieving" -> "receiving" bpf: Fix cold build of test_progs-no_alu32 ... ==================== Link: https://lore.kernel.org/r/20201204021936.85653-1-alexei.starovoitov@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-04Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-0/+1
Conflicts: drivers/net/ethernet/ibm/ibmvnic.c Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-03net: mvpp2: Fix error return code in mvpp2_open()Wang Hai1-0/+1
Fix to return negative error code -ENOENT from invalid configuration error handling case instead of 0, as done elsewhere in this function. Fixes: 4bb043262878 ("net: mvpp2: phylink support") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wang Hai <wanghai38@huawei.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20201203141806.37966-1-wanghai38@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-12-01xsk: Propagate napi_id to XDP socket Rx pathBjörn Töpel1-2/+2
Add napi_id to the xdp_rxq_info structure, and make sure the XDP socket pick up the napi_id in the Rx path. The napi_id is used to find the corresponding NAPI structure for socket busy polling. Signed-off-by: Björn Töpel <bjorn.topel@intel.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Acked-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Tariq Toukan <tariqt@nvidia.com> Link: https://lore.kernel.org/bpf/20201130185205.196029-7-bjorn.topel@gmail.com
2020-11-25net: mvpp2: divide fifo for dts-active ports onlyStefan Chulski1-35/+94
Tx/Rx FIFO is a HW resource limited by total size, but shared by all ports of same CP110 and impacting port-performance. Do not divide the FIFO for ports which are not enabled in DTS, so active ports could have more FIFO. No change in FIFO allocation if all 3 ports on the communication processor enabled in DTS. The active port mapping should be done in probe before FIFO-init. Signed-off-by: Stefan Chulski <stefanc@marvell.com> Reviewed-by: Russell King <rmk+kernel@armlinux.org.uk> Link: https://lore.kernel.org/r/1606154073-28267-1-git-send-email-stefanc@marvell.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-11-14net: mvpp2: Add xdp tx return bulking supportLorenzo Bianconi1-1/+9
Convert mvpp2 driver to xdp_return_frame_bulk APIs. XDP_REDIRECT (upstream codepath): 1.79Mpps XDP_REDIRECT (upstream codepath + bulking APIs): 1.93Mpps Co-developed-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Tested-by: Matteo Croce <mcroce@microsoft.com> Acked-by: John Fastabend <john.fastabend@gmail.com> Link: https://lore.kernel.org/bpf/0b38c295e58e8ce251ef6b4e2187a2f457f9f7a3.1605267335.git.lorenzo@kernel.org
2020-09-27net: marvell: mvpp2: Fix W=1 warning with !CONFIG_ACPIAndrew Lunn1-0/+2
rivers/net/ethernet/marvell/mvpp2/mvpp2_main.c:7084:36: warning: ‘mvpp2_acpi_match’ defined but not used [-Wunused-const-variable=] 7084 | static const struct acpi_device_id mvpp2_acpi_match[] = { | ^~~~~~~~~~~~~~~~ Wrap the definition inside #ifdef/#endif. Compile tested only. Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-14net: mvpp2: set SKBTX_IN_PROGRESSRussell King1-0/+2
Richard Cochran points out that SKBTX_IN_PROGRESS should be set when the skbuff is queued for timestamping. Add this. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-11net: mvpp2: ptp: Fix unused variablesAlex Dewar1-4/+2
In the functions mvpp2_isr_handle_xlg() and mvpp2_isr_handle_gmac_internal(), the bool variable link is assigned a true value in the case that a given bit of val is set. However, if the bit is unset, no value is assigned to link and it is then passed to mvpp2_isr_handle_link() without being initialised. Fix by assigning to link the value of the bit test. Build-tested on x86. Fixes: 36cfd3a6e52b ("net: mvpp2: restructure "link status" interrupt handling") Signed-off-by: Alex Dewar <alex.dewar90@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-10net: mvpp2: ptp: add support for transmit timestampingRussell King1-10/+189
Add support for timestamping transmit packets. We allocate SYNC messages to queue 1, every other message to queue 0. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-10net: mvpp2: ptp: add support for receive timestampingRussell King1-1/+107
Add support for receive timestamping. When enabled, the hardware adds a timestamp into the receive queue descriptor for all received packets with no filtering. Hence, we can only support NONE or ALL receive filter modes. The timestamp in the receive queue contains two bit sof seconds and the full nanosecond timestamp. This has to be merged with the remainder of the seconds from the TAI clock to arrive at a full timestamp before we can convert it to a ktime for the skb hardware timestamp field. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-10net: mvpp2: ptp: add TAI supportRussell King1-0/+4
Add support for the TAI block in the mvpp2.2 hardware. Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-10net: mvpp2: check first level interrupt status registersRussell King1-2/+11
Check the first level interrupt status registers to determine how to further process the port interrupt. We will need this to know whether to invoke the link status processing and/or the PTP processing for both XLG and GMAC. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-10net: mvpp2: rename mis-named "link status" interruptRussell King1-17/+18
The link interrupt is used for way more than just the link status; it comes from a collection of units to do with the port. The Marvell documentation describes the interrupt as "GOP port X interrupt". Since we are adding PTP support, and the PTP interrupt uses this, rename it to be more inline with the documentation. This interrupt is also mis-named in the DT binding, but we leave that alone. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-10net: mvpp2: restructure "link status" interrupt handlingRussell King1-32/+51
The "link status" interrupt is used for more than just link status. Restructure mvpp2_link_status_isr() so we can add additional handling. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-05Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-2/+2
We got slightly different patches removing a double word in a comment in net/ipv4/raw.c - picked the version from net. Simple conflict in drivers/net/ethernet/ibm/ibmvnic.c. Use cached values instead of VNIC login response buffer (following what commit 507ebe6444a4 ("ibmvnic: Fix use-after-free of VNIC login response buffer") did). Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-09-04net: mvpp2: split xlg and gmac pcsRussell King1-55/+55
Split the XLG and GMAC PCS implementations and switch between them during the mac_prepare() method. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-04net: mvpp2: convert to phylink pcs operationsRussell King1-116/+176
Convert mvpp2 to phylink's new pcs support. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-04net: mvpp2: move GMAC reset handling into mac_prepare()/mac_finish()Russell King1-32/+21
Move the GMAC reset handling into mac_prepare() / mac_finish() Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-04net: mvpp2: ensure the port is forced down while changing modesRussell King1-11/+36
Ensure that the port is forced down while reconfiguring, controlling this via mac_prepare() and mac_finish() so that it is down while we are configuring our (future) PCS. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-04net: mvpp2: convert to use mac_prepare()/mac_finish()Russell King1-11/+37
Convert mvpp2 to use the mac_prepare() and mac_finish() methods in preparation to converting mvpp2 to split-PCS support. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-04net: mvpp2: tidy up ACPI hackRussell King1-18/+18
Tidy up the ACPI hack so that we can minimise the function prototypes for this. This avoids adding further prototypes unnecessarily. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-24treewide: Use fallthrough pseudo-keywordGustavo A. R. Silva1-2/+2
Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary fall-through markings when it is the case. [1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
2020-08-04Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextDavid S. Miller1-3/+0
Daniel Borkmann says: ==================== pull-request: bpf-next 2020-08-04 The following pull-request contains BPF updates for your *net-next* tree. We've added 73 non-merge commits during the last 9 day(s) which contain a total of 135 files changed, 4603 insertions(+), 1013 deletions(-). The main changes are: 1) Implement bpf_link support for XDP. Also add LINK_DETACH operation for the BPF syscall allowing processes with BPF link FD to force-detach, from Andrii Nakryiko. 2) Add BPF iterator for map elements and to iterate all BPF programs for efficient in-kernel inspection, from Yonghong Song and Alexei Starovoitov. 3) Separate bpf_get_{stack,stackid}() helpers for perf events in BPF to avoid unwinder errors, from Song Liu. 4) Allow cgroup local storage map to be shared between programs on the same cgroup. Also extend BPF selftests with coverage, from YiFei Zhu. 5) Add BPF exception tables to ARM64 JIT in order to be able to JIT BPF_PROBE_MEM load instructions, from Jean-Philippe Brucker. 6) Follow-up fixes on BPF socket lookup in combination with reuseport group handling. Also add related BPF selftests, from Jakub Sitnicki. 7) Allow to use socket storage in BPF_PROG_TYPE_CGROUP_SOCK-typed programs for socket create/release as well as bind functions, from Stanislav Fomichev. 8) Fix an info leak in xsk_getsockopt() when retrieving XDP stats via old struct xdp_statistics, from Peilin Ye. 9) Fix PT_REGS_RC{,_CORE}() macros in libbpf for MIPS arch, from Jerry Crunchtime. 10) Extend BPF kernel test infra with skb->family and skb->{local,remote}_ip{4,6} fields and allow user space to specify skb->dev via ifindex, from Dmitry Yakunin. 11) Fix a bpftool segfault due to missing program type name and make it more robust to prevent them in future gaps, from Quentin Monnet. 12) Consolidate cgroup helper functions across selftests and fix a v6 localhost resolver issue, from John Fastabend. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2020-08-04net: mvpp2: fix memory leak in mvpp2_rxLorenzo Bianconi1-0/+1
Release skb memory in mvpp2_rx() if mvpp2_rx_refill routine fails Fixes: b5015854674b ("net: mvpp2: fix refilling BM pools in RX path") Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Acked-by: Matteo Croce <mcroce@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-26bpf, xdp: Remove XDP_QUERY_PROG and XDP_QUERY_PROG_HW XDP commandsAndrii Nakryiko1-3/+0
Now that BPF program/link management is centralized in generic net_device code, kernel code never queries program id from drivers, so XDP_QUERY_PROG/XDP_QUERY_PROG_HW commands are unnecessary. This patch removes all the implementations of those commands in kernel, along the xdp_attachment_query(). This patch was compile-tested on allyesconfig. Signed-off-by: Andrii Nakryiko <andriin@fb.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20200722064603.3350758-10-andriin@fb.com
2020-07-07mvpp2: fix pointer checkMatteo Croce1-3/+12
priv->page_pool is an array, so comparing against it will always return true. Do a meaningful check by checking priv->page_pool[0] instead. While at it, clear the page_pool pointers on deallocation, or when an allocation error happens during init. Reported-by: Colin Ian King <colin.king@canonical.com> Fixes: c2d6fe6163de ("mvpp2: XDP TX support") Signed-off-by: Matteo Croce <mcroce@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-04mvpp2: xdp ethtool statsSven Auhagen1-18/+140
Add ethtool statistics for XDP. Signed-off-by: Sven Auhagen <sven.auhagen@voleatech.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-04mvpp2: XDP TX supportMatteo Croce1-44/+260
Add the transmit part of XDP support, which includes: - support for XDP_TX in mvpp2_xdp() - .ndo_xdp_xmit hook for AF_XDP and XDP_REDIRECT with mvpp2 as destination mvpp2_xdp_submit_frame() is a generic function which is called by mvpp2_xdp_xmit_back() when doing XDP_TX, and by mvpp2_xdp_xmit when doing AF_XDP or XDP_REDIRECT target. The buffer allocation has been reworked to be able to map the buffers as DMA_FROM_DEVICE or DMA_BIDIRECTIONAL depending if native XDP is in use or not. Co-developed-by: Sven Auhagen <sven.auhagen@voleatech.de> Signed-off-by: Sven Auhagen <sven.auhagen@voleatech.de> Signed-off-by: Matteo Croce <mcroce@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-04mvpp2: add basic XDP supportMatteo Croce1-3/+162
Add XDP native support. By now only XDP_DROP, XDP_PASS and XDP_REDIRECT verdicts are supported. Co-developed-by: Sven Auhagen <sven.auhagen@voleatech.de> Signed-off-by: Sven Auhagen <sven.auhagen@voleatech.de> Signed-off-by: Matteo Croce <mcroce@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-04mvpp2: use page_pool allocatorMatteo Croce1-25/+131
Use the page_pool API for memory management. This is a prerequisite for native XDP support. Tested-by: Sven Auhagen <sven.auhagen@voleatech.de> Signed-off-by: Matteo Croce <mcroce@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-04mvpp2: refactor BM pool init percpu codeMatteo Croce1-12/+11
In mvpp2_swf_bm_pool_init_percpu(), a reference to a struct mvpp2_bm_pool is obtained traversing multiple structs, when a local variable already points to the same object. Fix it and, while at it, give the variable a meaningful name. Signed-off-by: Matteo Croce <mcroce@microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-21net: mvpp2: set xlg flow control in mvpp2_mac_link_up()Russell King1-12/+11
Set the flow control settings in mvpp2_mac_link_up() for 10G links just as we do for 1G and slower links. This is now the preferred location. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-21net: mvpp2: add register modification helperRussell King1-42/+46
Add a helper to read-modify-write a register, and use it in the phylink helpers. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-21net: mvpp2: add mvpp2_phylink_to_port() helperRussell King1-15/+14
Add a helper to convert the struct phylink_config pointer passed in from phylink to the drivers internal struct mvpp2_port. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-21net: mvpp2: add port support helpersRussell King1-16/+27
The mvpp2 code has tests scattered amongst the code to determine whether the port supports the XLG, and whether the port supports RGMII mode. Rather than having these tests scattered, provide a couple of helper functions, so that future additions can ensure that they get these tests correct. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-19net: tso: cache transport header lengthEric Dumazet1-3/+3
Add tlen field into struct tso_t, and change tso_start() to return skb_transport_offset(skb) + tso->tlen This removes from callers the need to use tcp_hdrlen(skb) and will ease UDP segmentation offload addition. v2: calls tso_start() earlier in otx2_sq_append_tso() [Jakub] Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-16mvpp2: remove module bugfixSven Auhagen1-2/+5
The remove function does not destroy all BM Pools when per cpu pool is active. When reloading the mvpp2 as a module the BM Pools are still active in hardware and due to the bug have twice the size now old + new. This eventually leads to a kernel crash. v2: * add Fixes tag Fixes: 7d04b0b13b11 ("mvpp2: percpu buffers") Signed-off-by: Sven Auhagen <sven.auhagen@voleatech.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-06-15mvpp2: ethtool rxtx stats fixSven Auhagen1-2/+2
The ethtool rx and tx queue statistics are reporting wrong values. Fix reading out the correct ones. Signed-off-by: Sven Auhagen <sven.auhagen@voleatech.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-05-07net: mvpp2: prevent buffer overflow in mvpp22_rss_ctx()Dan Carpenter1-0/+2
The "rss_context" variable comes from the user via ethtool_get_rxfh(). It can be any u32 value except zero. Eventually it gets passed to mvpp22_rss_ctx() and if it is over MVPP22_N_RSS_TABLES (8) then it results in an array overflow. Fixes: 895586d5dc32 ("net: mvpp2: cls: Use RSS contexts to handle RSS tables") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-15net: mvpp2: reject unsupported coalescing paramsJakub Kicinski1-0/+2
Set ethtool_ops->supported_coalesce_params to let the core reject unsupported coalescing parameters. This driver did not previously reject unsupported parameters. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Acked-by: Matteo Croce <mcroce@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-27net: mvpp2: use resolved link config in mac_link_up()Russell King1-36/+47
Convert the Marvell mvpp2 ethernet driver to use the finalised link parameters in mac_link_up() rather than the parameters in mac_config(). Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-27net: phylink: propagate resolved link config via mac_link_up()Russell King1-6/+13
Propagate the resolved link parameters via the mac_link_up() call for MACs that do not automatically track their PCS state. We propagate the link parameters via function arguments so that inappropriate members of struct phylink_link_state can't be accessed, and creating a new structure just for this adds needless complexity to the API. Tested-by: Andre Przywara <andre.przywara@arm.com> Tested-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-06net: switch to using PHY_INTERFACE_MODE_10GBASER rather than 10GKRRussell King1-5/+14
Switch network drivers, phy drivers, and SFP/phylink over to use the more correct 10GBASE-R, rather than 10GBASE-KR. 10GBASE-KR is backplane ethernet, which is 10GBASE-R with autonegotiation on top, which our current usage on the affected platforms does not have. The only remaining user of PHY_INTERFACE_MODE_10GKR is the Aquantia PHY, which has a separate mode for 10GBASE-KR. For Marvell mvpp2, we detect 10GBASE-KR, and rewrite it to 10GBASE-R for compatibility with existing DT - this is the only network driver at present that makes use of PHY_INTERFACE_MODE_10GKR. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller1-1/+1
Mere overlapping changes in the conflicts here. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-20net: mvpp2: cycle comphy to power it downRussell King1-0/+10
Presently, at boot time, the comphys are enabled. For firmware compatibility reasons, the comphy driver does not power down the comphys at boot. Consequently, the ethernet comphys are left active until the network interfaces are brought through an up/down cycle. If the port is never used, the port wastes power needlessly. Arrange for the ethernet comphys to be cycled by the mvpp2 driver as if the interface went through an up/down cycle during driver probe, thereby powering them down. This saves: 270mW per 10G SFP+ port on the Macchiatobin Single Shot (eth0/eth1) 370mW per 10G PHY port on the Macchiatobin Double Shot (eth0/eth1) 160mW on the SFP port on either Macchiatobin flavour (eth3) Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Acked-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-18net: mvpp2: update mvpp2 validate() implementationRussell King1-4/+18
Fix up the mvpp2 validate implementation to adopt the same behaviour as mvneta: - only allow the link modes that the specified PHY interface mode supports with the exception of 1000base-X and 2500base-X. - use the basex helper to deal with SFP modules that can be switched between 1000base-X vs 2500base-X. This gives consistent behaviour between mvneta and mvpp2. This commit depends on "net: phylink: extend clause 45 PHY validation workaround" so is not marked for backporting to stable kernels. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Acked-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-14net: marvell: mvpp2: phylink requires the link interruptRussell King1-1/+1
phylink requires the MAC to report when its link status changes when operating in inband modes. Failure to report link status changes means that phylink has no idea when the link events happen, which results in either the network interface's carrier remaining up or remaining permanently down. For example, with a fiber module, if the interface is brought up and link is initially established, taking the link down at the far end will cut the optical power. The SFP module's LOS asserts, we deactivate the link, and the network interface reports no carrier. When the far end is brought back up, the SFP module's LOS deasserts, but the MAC may be slower to establish link. If this happens (which in my tests is a certainty) then phylink never hears that the MAC has established link with the far end, and the network interface is stuck reporting no carrier. This means the interface is non-functional. Avoiding the link interrupt when we have phylink is basically not an option, so remove the !port->phylink from the test. Fixes: 4bb043262878 ("net: mvpp2: phylink support") Tested-by: Sven Auhagen <sven.auhagen@voleatech.de> Tested-by: Antoine Tenart <antoine.tenart@bootlin.com> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
2019-11-24net: phylink: rename mac_link_state() op to mac_pcs_get_state()Russell King1-11/+10
Rename the mac_link_state() method to mac_pcs_get_state() to make it clear that it should be returning the MACs PCS current state, which is used for inband negotiation rather than just reading back what the MAC has been configured for. Update the documentation to explicitly mention that this is for inband. We drop the return value as well; most of phylink doesn't check the return value and it is not clear what it should do on error - instead arrange for state->link to be false. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
2019-10-28mvpp2: prefetch frame headerMatteo Croce1-0/+1
When receiving traffic, eth_type_trans() is high up on the perf top list, because it's the first function which access the packet data. Move the DMA unmap a bit higher, and put a prefetch just after it, so we have more time to load the data into the cache. The packet rate increase is about 14% with a tc drop test: 1620 => 1853 kpps Signed-off-by: Matteo Croce <mcroce@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-26 03:17:59 +0300