summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/intel
AgeCommit message (Collapse)AuthorFilesLines
2022-09-07iavf: Fix race between iavf_close and iavf_reset_taskMichal Jaron1-36/+141
During stress tests with adding VF to namespace and changing vf's trust there was a race between iavf_reset_task and iavf_close. Sometimes when IAVF_FLAG_AQ_DISABLE_QUEUES from iavf_close was sent to PF after reset and before IAVF_AQ_GET_CONFIG was sent then PF returns error IAVF_NOT_SUPPORTED to disable queues request and following requests. There is need to get_config before other aq_required will be send but iavf_close clears all flags, if get_config was not sent before iavf_close, then it will not be send at all. In case when IAVF_FLAG_AQ_GET_OFFLOAD_VLAN_V2_CAPS was sent before IAVF_FLAG_AQ_DISABLE_QUEUES then there was rtnl_lock deadlock between iavf_close and iavf_adminq_task until iavf_close timeouts and disable queues was sent after iavf_close ends. There was also a problem with sending delete/add filters. Sometimes when filters was not yet added to PF and in iavf_close all filters was set to remove there might be a try to remove nonexistent filters on PF. Add aq_required_tmp to save aq_required flags and send them after disable_queues will be handled. Clear flags given to iavf_down different than IAVF_FLAG_AQ_GET_CONFIG as this flag is necessary to sent other aq_required. Remove some flags that we don't want to send as we are in iavf_close and we want to disable interface. Remove filters which was not yet sent and send del filters flags only when there are filters to remove. Signed-off-by: Michal Jaron <michalx.jaron@intel.com> Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-09-06ice: Simplify memory allocation in ice_sched_init_port()Christophe JAILLET1-2/+2
'buf' is locale to the ice_sched_init_port() function. There is no point in using devm_kzalloc()/devm_kfree(). use kzalloc()/kfree() instead. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-09-06ice: switch: Simplify memory allocationChristophe JAILLET1-4/+2
'rbuf' is locale to the ice_get_initial_sw_cfg() function. There is no point in using devm_kzalloc()/devm_kfree(). use kzalloc()/kfree() instead. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-09-06ice: add helper function to check FW API versionPaul Greenwalt1-28/+29
Several functions in ice_common.c check the firmware API version to see if the current API version meets some minimum requirement. Improve the readability of these checks by introducing ice_is_fw_api_min_ver, a helper function to perform that check. Signed-off-by: Paul Greenwalt <paul.greenwalt@intel.com> Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-09-06ice: Check if reset in progress while waiting for offsetsMichal Michalik1-0/+3
Occasionally while waiting to valid offsets from hardware we get reset. Add check for reset before proceeding to execute scheduled work. Co-developed-by: Karol Kolacinski <karol.kolacinski@intel.com> Signed-off-by: Karol Kolacinski <karol.kolacinski@intel.com> Signed-off-by: Michal Michalik <michal.michalik@intel.com> Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-09-06ice: Allow operation with reduced device MSI-XTony Nguyen1-85/+100
The driver currently takes an all or nothing approach for device MSI-X vectors. Meaning if it does not get its full allocation, it will fail and not load. There is no reason it can't work with a reduced number of MSI-X vectors. Take a similar approach as commit 741106f7bd8d ("ice: Improve MSI-X fallback logic") and, instead, adjust the MSI-X request to make use of what is available. Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Tested-by: Petr Oros <poros@redhat.com> Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel)
2022-09-06i40e: add description and modify interrupts configuration procedureJaroslaw Gawin2-21/+27
Add description for values written into registers QINT_XXXX and small cosmetic changes for MSI/LEGACY interrupts configuration in the same way as for MSI-X. Descriptions confirm the code is written correctly and make the code clear. Small cosmetic changes for MSI/LEGACY interrupts make code clear in the same manner as for MSI-X interrupts. Signed-off-by: Jaroslaw Gawin <jaroslawx.gawin@intel.com> Signed-off-by: Andrii Staikov <andrii.staikov@intel.com> Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-09-06i40e: Add basic support for I710 devicesStanislaw Grzeszczak3-1/+7
Intel introduces a new line of 1G ethernet adapters with Device ID 0x0DD2 Signed-off-by: Stanislaw Grzeszczak <stanislaw.a.grzeszczak@intel.com> Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com> Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-09-03Merge branch '40GbE' of ↵David S. Miller4-5/+20
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2022-09-02 (i40e, iavf) This series contains updates to i40e and iavf drivers. Przemyslaw adds reset to ADQ configuration to allow for setting of rate limit beyond TC0 for i40e. Ivan Vecera does not free client on failure to open which could cause NULL pointer dereference to occur on i40e. He also detaches device during reset to prevent NDO calls with could cause races for iavf. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-02iavf: Detach device during reset taskIvan Vecera1-3/+11
iavf_reset_task() takes crit_lock at the beginning and holds it during whole call. The function subsequently calls iavf_init_interrupt_scheme() that grabs RTNL. Problem occurs when userspace initiates during the reset task any ndo callback that runs under RTNL like iavf_open() because some of that functions tries to take crit_lock. This leads to classic A-B B-A deadlock scenario. To resolve this situation the device should be detached in iavf_reset_task() prior taking crit_lock to avoid subsequent ndos running under RTNL and reattach the device at the end. Fixes: 62fe2a865e6d ("i40evf: add missing rtnl_lock() around i40evf_set_interrupt_capability") Cc: Jacob Keller <jacob.e.keller@intel.com> Cc: Patryk Piotrowski <patryk.piotrowski@intel.com> Cc: SlawomirX Laba <slawomirx.laba@intel.com> Tested-by: Vitaly Grinberg <vgrinber@redhat.com> Signed-off-by: Ivan Vecera <ivecera@redhat.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-09-02i40e: Fix kernel crash during module removalIvan Vecera1-1/+4
The driver incorrectly frees client instance and subsequent i40e module removal leads to kernel crash. Reproducer: 1. Do ethtool offline test followed immediately by another one host# ethtool -t eth0 offline; ethtool -t eth0 offline 2. Remove recursively irdma module that also removes i40e module host# modprobe -r irdma Result: [ 8675.035651] i40e 0000:3d:00.0 eno1: offline testing starting [ 8675.193774] i40e 0000:3d:00.0 eno1: testing finished [ 8675.201316] i40e 0000:3d:00.0 eno1: offline testing starting [ 8675.358921] i40e 0000:3d:00.0 eno1: testing finished [ 8675.496921] i40e 0000:3d:00.0: IRDMA hardware initialization FAILED init_state=2 status=-110 [ 8686.188955] i40e 0000:3d:00.1: i40e_ptp_stop: removed PHC on eno2 [ 8686.943890] i40e 0000:3d:00.1: Deleted LAN device PF1 bus=0x3d dev=0x00 func=0x01 [ 8686.952669] i40e 0000:3d:00.0: i40e_ptp_stop: removed PHC on eno1 [ 8687.761787] BUG: kernel NULL pointer dereference, address: 0000000000000030 [ 8687.768755] #PF: supervisor read access in kernel mode [ 8687.773895] #PF: error_code(0x0000) - not-present page [ 8687.779034] PGD 0 P4D 0 [ 8687.781575] Oops: 0000 [#1] PREEMPT SMP NOPTI [ 8687.785935] CPU: 51 PID: 172891 Comm: rmmod Kdump: loaded Tainted: G W I 5.19.0+ #2 [ 8687.794800] Hardware name: Intel Corporation S2600WFD/S2600WFD, BIOS SE5C620.86B.0X.02.0001.051420190324 05/14/2019 [ 8687.805222] RIP: 0010:i40e_lan_del_device+0x13/0xb0 [i40e] [ 8687.810719] Code: d4 84 c0 0f 84 b8 25 01 00 e9 9c 25 01 00 41 bc f4 ff ff ff eb 91 90 0f 1f 44 00 00 41 54 55 53 48 8b 87 58 08 00 00 48 89 fb <48> 8b 68 30 48 89 ef e8 21 8a 0f d5 48 89 ef e8 a9 78 0f d5 48 8b [ 8687.829462] RSP: 0018:ffffa604072efce0 EFLAGS: 00010202 [ 8687.834689] RAX: 0000000000000000 RBX: ffff8f43833b2000 RCX: 0000000000000000 [ 8687.841821] RDX: 0000000000000000 RSI: ffff8f4b0545b298 RDI: ffff8f43833b2000 [ 8687.848955] RBP: ffff8f43833b2000 R08: 0000000000000001 R09: 0000000000000000 [ 8687.856086] R10: 0000000000000000 R11: 000ffffffffff000 R12: ffff8f43833b2ef0 [ 8687.863218] R13: ffff8f43833b2ef0 R14: ffff915103966000 R15: ffff8f43833b2008 [ 8687.870342] FS: 00007f79501c3740(0000) GS:ffff8f4adffc0000(0000) knlGS:0000000000000000 [ 8687.878427] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 8687.884174] CR2: 0000000000000030 CR3: 000000014276e004 CR4: 00000000007706e0 [ 8687.891306] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 8687.898441] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 8687.905572] PKRU: 55555554 [ 8687.908286] Call Trace: [ 8687.910737] <TASK> [ 8687.912843] i40e_remove+0x2c0/0x330 [i40e] [ 8687.917040] pci_device_remove+0x33/0xa0 [ 8687.920962] device_release_driver_internal+0x1aa/0x230 [ 8687.926188] driver_detach+0x44/0x90 [ 8687.929770] bus_remove_driver+0x55/0xe0 [ 8687.933693] pci_unregister_driver+0x2a/0xb0 [ 8687.937967] i40e_exit_module+0xc/0xf48 [i40e] Two offline tests cause IRDMA driver failure (ETIMEDOUT) and this failure is indicated back to i40e_client_subtask() that calls i40e_client_del_instance() to free client instance referenced by pf->cinst and sets this pointer to NULL. During the module removal i40e_remove() calls i40e_lan_del_device() that dereferences pf->cinst that is NULL -> crash. Do not remove client instance when client open callbacks fails and just clear __I40E_CLIENT_INSTANCE_OPENED bit. The driver also needs to take care about this situation (when netdev is up and client is NOT opened) in i40e_notify_client_of_netdev_close() and calls client close callback only when __I40E_CLIENT_INSTANCE_OPENED is set. Fixes: 0ef2d5afb12d ("i40e: KISS the client interface") Signed-off-by: Ivan Vecera <ivecera@redhat.com> Tested-by: Helena Anna Dubel <helena.anna.dubel@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-09-02i40e: Fix ADQ rate limiting for PFPrzemyslaw Patynowski2-1/+5
Fix HW rate limiting for ADQ. Fallback to kernel queue selection for ADQ, as it is network stack that decides which queue to use for transmit with ADQ configured. Reset PF after creation of VMDq2 VSIs required for ADQ, as to reprogram TX queue contexts in i40e_configure_tx_ring. Without this patch PF would limit TX rate only according to TC0. Fixes: a9ce82f744dc ("i40e: Enable 'channel' mode in mqprio for TC configs") Signed-off-by: Przemyslaw Patynowski <przemyslawx.patynowski@intel.com> Signed-off-by: Jan Sokolowski <jan.sokolowski@intel.com> Tested-by: Bharathi Sreenivas <bharathi.sreenivas@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-09-02ice: use bitmap_free instead of devm_kfreeMichal Swiatkowski1-1/+1
pf->avail_txqs was allocated using bitmap_zalloc, bitmap_free should be used to free this memory. Fixes: 78b5713ac1241 ("ice: Alloc queue management bitmaps and arrays dynamically") Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-09-02ice: Fix DMA mappings leakPrzemyslaw Patynowski4-17/+79
Fix leak, when user changes ring parameters. During reallocation of RX buffers, new DMA mappings are created for those buffers. New buffers with different RX ring count should substitute older ones, but those buffers were freed in ice_vsi_cfg_rxq and reallocated again with ice_alloc_rx_buf. kfree on rx_buf caused leak of already mapped DMA. Reallocate ZC with xdp_buf struct, when BPF program loads. Reallocate back to rx_buf, when BPF program unloads. If BPF program is loaded/unloaded and XSK pools are created, reallocate RX queues accordingly in XDP_SETUP_XSK_POOL handler. Steps for reproduction: while : do for ((i=0; i<=8160; i=i+32)) do ethtool -G enp130s0f0 rx $i tx $i sleep 0.5 ethtool -g enp130s0f0 done done Fixes: 617f3e1b588c ("ice: xsk: allocate separate memory for XDP SW ring") Signed-off-by: Przemyslaw Patynowski <przemyslawx.patynowski@intel.com> Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com> Tested-by: Chandan <chandanx.rout@intel.com> (A Contingent Worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-09-01net: ethernet: move from strlcpy with unused retval to strscpyWolfram Sang16-40/+40
Follow the advice of the below link and prefer 'strscpy' in this subsystem. Conversion is 1:1 because the return value is not used. Generated by a coccinelle script. Link: https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/ Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Petr Machata <petrm@nvidia.com> # For drivers/net/ethernet/mellanox/mlxsw Acked-by: Geoff Levand <geoff@infradead.org> # For ps3_gelic_net and spider_net_ethtool Acked-by: Tom Lendacky <thomas.lendacky@amd.com> # For drivers/net/ethernet/amd/xgbe/xgbe-ethtool.c Acked-by: Marcin Wojtas <mw@semihalf.com> # For drivers/net/ethernet/marvell/mvpp2 Reviewed-by: Leon Romanovsky <leonro@nvidia.com> # For drivers/net/ethernet/mellanox/mlx{4|5} Reviewed-by: Shay Agroskin <shayagr@amazon.com> # For drivers/net/ethernet/amazon/ena Acked-by: Krzysztof Hałasa <khalasa@piap.pl> # For IXP4xx Ethernet Link: https://lore.kernel.org/r/20220830201457.7984-3-wsa+renesas@sang-engineering.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-26Merge branch '100GbE' of ↵David S. Miller9-27/+768
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2022-08-24 (ice) This series contains updates to ice driver only. Marcin adds support for TC parsing on TTL and ToS fields. Anatolli adds support for devlink port split command to allow configuration of various port configurations. Jake allows for passing and writing an additional NVM write activate field by expanding current cmd_flag. Ani makes PHY debug output more readable. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2022-08-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski6-43/+101
drivers/net/ethernet/mellanox/mlx5/core/en_fs.c 21234e3a84c7 ("net/mlx5e: Fix use after free in mlx5e_fs_init()") c7eafc5ed068 ("net/mlx5e: Convert ethtool_steering member of flow_steering struct to pointer") https://lore.kernel.org/all/20220825104410.67d4709c@canb.auug.org.au/ https://lore.kernel.org/all/20220823055533.334471-1-saeed@kernel.org/ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-24i40e: Fix incorrect address type for IPv6 flow rulesSylwester Dziedziuch1-1/+1
It was not possible to create 1-tuple flow director rule for IPv6 flow type. It was caused by incorrectly checking for source IP address when validating user provided destination IP address. Fix this by changing ip6src to correct ip6dst address in destination IP address validation for IPv6 flow type. Fixes: efca91e89b67 ("i40e: Add flow director support for IPv6") Signed-off-by: Sylwester Dziedziuch <sylwesterx.dziedziuch@intel.com> Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-08-24ixgbe: stop resetting SYSTIME in ixgbe_ptp_start_cyclecounterJacob Keller1-13/+46
The ixgbe_ptp_start_cyclecounter is intended to be called whenever the cyclecounter parameters need to be changed. Since commit a9763f3cb54c ("ixgbe: Update PTP to support X550EM_x devices"), this function has cleared the SYSTIME registers and reset the TSAUXC DISABLE_SYSTIME bit. While these need to be cleared during ixgbe_ptp_reset, it is wrong to clear them during ixgbe_ptp_start_cyclecounter. This function may be called during both reset and link status change. When link changes, the SYSTIME counter is still operating normally, but the cyclecounter should be updated to account for the possibly changed parameters. Clearing SYSTIME when link changes causes the timecounter to jump because the cycle counter now reads zero. Extract the SYSTIME initialization out to a new function and call this during ixgbe_ptp_reset. This prevents the timecounter adjustment and avoids an unnecessary reset of the current time. This also restores the original SYSTIME clearing that occurred during ixgbe_ptp_reset before the commit above. Reported-by: Steve Payne <spayne@aurora.tech> Reported-by: Ilya Evenbach <ievenbach@aurora.tech> Fixes: a9763f3cb54c ("ixgbe: Update PTP to support X550EM_x devices") Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-08-24ice: Print human-friendly PHY typesAnirudh Venkataramanan1-18/+140
Provide human readable description of PHY capabilities and report_mode. Sample output: Old: [ 286.130405] ice 0000:16:00.0: get phy caps - report_mode = 0x2 [ 286.130409] ice 0000:16:00.0: phy_type_low = 0x108021020502000 [ 286.130412] ice 0000:16:00.0: phy_type_high = 0x0 [ 286.130415] ice 0000:16:00.0: caps = 0xc8 [ 286.130419] ice 0000:16:00.0: low_power_ctrl_an = 0x4 [ 286.130421] ice 0000:16:00.0: eee_cap = 0x0 [ 286.130424] ice 0000:16:00.0: eeer_value = 0x0 [ 286.130427] ice 0000:16:00.0: link_fec_options = 0xdf [ 286.130430] ice 0000:16:00.0: module_compliance_enforcement = 0x0 [ 286.130433] ice 0000:16:00.0: extended_compliance_code = 0xb [ 286.130435] ice 0000:16:00.0: module_type[0] = 0x11 [ 286.130438] ice 0000:16:00.0: module_type[1] = 0x1 [ 286.130441] ice 0000:16:00.0: module_type[2] = 0x0 New: [ 1128.297347] ice 0000:16:00.0: get phy caps dump [ 1128.297351] ice 0000:16:00.0: phy_caps_active: phy_type_low: 0x0108021020502000 [ 1128.297355] ice 0000:16:00.0: phy_caps_active: bit(13): 10G_SFI_DA [ 1128.297359] ice 0000:16:00.0: phy_caps_active: bit(20): 25GBASE_CR [ 1128.297362] ice 0000:16:00.0: phy_caps_active: bit(22): 25GBASE_CR1 [ 1128.297365] ice 0000:16:00.0: phy_caps_active: bit(29): 25G_AUI_C2C [ 1128.297368] ice 0000:16:00.0: phy_caps_active: bit(36): 50GBASE_CR2 [ 1128.297371] ice 0000:16:00.0: phy_caps_active: bit(41): 50G_LAUI2 [ 1128.297374] ice 0000:16:00.0: phy_caps_active: bit(51): 100GBASE_CR4 [ 1128.297377] ice 0000:16:00.0: phy_caps_active: bit(56): 100G_CAUI4 [ 1128.297380] ice 0000:16:00.0: phy_caps_active: phy_type_high: 0x0000000000000000 [ 1128.297383] ice 0000:16:00.0: phy_caps_active: report_mode = 0x4 [ 1128.297386] ice 0000:16:00.0: phy_caps_active: caps = 0xc8 [ 1128.297389] ice 0000:16:00.0: phy_caps_active: low_power_ctrl_an = 0x4 [ 1128.297392] ice 0000:16:00.0: phy_caps_active: eee_cap = 0x0 [ 1128.297394] ice 0000:16:00.0: phy_caps_active: eeer_value = 0x0 [ 1128.297397] ice 0000:16:00.0: phy_caps_active: link_fec_options = 0xdf [ 1128.297400] ice 0000:16:00.0: phy_caps_active: module_compliance_enforcement = 0x0 [ 1128.297402] ice 0000:16:00.0: phy_caps_active: extended_compliance_code = 0xb [ 1128.297405] ice 0000:16:00.0: phy_caps_active: module_type[0] = 0x11 [ 1128.297408] ice 0000:16:00.0: phy_caps_active: module_type[1] = 0x1 [ 1128.297411] ice 0000:16:00.0: phy_caps_active: module_type[2] = 0x0 Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Co-developed-by: Lukasz Plachno <lukasz.plachno@intel.com> Signed-off-by: Lukasz Plachno <lukasz.plachno@intel.com> Reviewed-by: Alexander Lobakin <alexandr.lobakin@intel.com> Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-08-24ice: Implement devlink port split operationsAnatolii Gerasymenko2-0/+290
Allow to configure port split options using the devlink port split interface. Support port splitting only for port 0, as the FW has a predefined set of available port split options for the whole device. Add ice_devlink_port_options_print() function to print the table with all available FW port split options. It will be printed after each port split and unsplit command. Add documentation for devlink port split interface usage for the ice driver. Co-developed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Anatolii Gerasymenko <anatolii.gerasymenko@intel.com> Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-08-24ice: Add additional flags to ice_nvm_write_activateJacob Keller3-5/+16
The ice_nvm_write_activate function is used to issue AdminQ command 0x0707 which sends a request to firmware to activate a flash bank. For basic operations, this command takes an 8bit flag value which defines the flags to control the activation process. There are some additional flags that are stored in a second 8bit flag field. We can simplify the interface by using a u16 cmd_flags variable. Split this over the two bytes of flag storage in the structure. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Anatolii Gerasymenko <anatolii.gerasymenko@intel.com> Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-08-24ice: Add port option admin queue commandsAnatolii Gerasymenko3-0/+178
Implement support for Get/Set Port Options admin queue commands (0x06EA/0x06EB). These firmware commands allow the driver to change port specific options and will be used in the next patch. Co-developed-by: Lev Faerman <lev.faerman@intel.com> Signed-off-by: Lev Faerman <lev.faerman@intel.com> Co-developed-by: Damian Milosek <damian.milosek@intel.com> Signed-off-by: Damian Milosek <damian.milosek@intel.com> Co-developed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Anatolii Gerasymenko <anatolii.gerasymenko@intel.com> Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-08-24ice: Add support for ip TTL & ToS offloadMarcin Szycik2-4/+144
Add support for parsing TTL and ToS (Hop Limit and Traffic Class) tc fields and matching on those fields in filters. Incomplete part of implementation was already in place (getting enc_ip and enc_tos from flow_match_ip and writing them to filter header). Note: matching on ipv6 ip_ttl, enc_ttl and enc_tos is currently not supported by the DDP package. Signed-off-by: Marcin Szycik <marcin.szycik@linux.intel.com> Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-08-23Merge branch '10GbE' of ↵Jakub Kicinski3-6/+57
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2022-08-18 (ixgbe) This series contains updates to ixgbe driver only. Fabio M. De Francesco replaces kmap() call to page_address() for rx_buffer->page(). Jeff Daly adds a manual AN-37 restart to help resolve issues with some link partners. * '10GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue: ixgbe: Manual AN-37 for troublesome link partners for X550 SFI ixgbe: Don't call kmap() on page allocated with GFP_ATOMIC ==================== Link: https://lore.kernel.org/r/20220818223402.1294091-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-23Merge branch '100GbE' of ↵Jakub Kicinski13-184/+136
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2022-08-18 (ice) This series contains updates to ice driver only. Jesse and Anatolii add support for controlling FCS/CRC stripping via ethtool. Anirudh allows for 100M speeds on devices which support it. Sylwester removes ucast_shared field and the associated dead code related to it. Mikael removes non-inclusive language from the driver. * '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue: ice: remove non-inclusive language ice: Remove ucast_shared ice: Allow 100M speeds for some devices ice: Implement FCS/CRC and VLAN stripping co-existence policy ice: Implement control of FCS/CRC stripping ==================== Link: https://lore.kernel.org/r/20220818155207.996297-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-22ice: xsk: use Rx ring's XDP ring when picking NAPI contextMaciej Fijalkowski4-29/+48
Ice driver allocates per cpu XDP queues so that redirect path can safely use smp_processor_id() as an index to the array. At the same time though, XDP rings are used to pick NAPI context to call napi_schedule() or set NAPIF_STATE_MISSED. When user reduces queue count, say to 8, and num_possible_cpus() of underlying platform is 44, then this means queue vectors with correlated NAPI contexts will carry several XDP queues. This in turn can result in a broken behavior where NAPI context of interest will never be scheduled and AF_XDP socket will not process any traffic. To fix this, let us change the way how XDP rings are assigned to Rx rings and use this information later on when setting ice_tx_ring::xsk_pool pointer. For each Rx ring, grab the associated queue vector and walk through Tx ring's linked list. Once we stumble upon XDP ring in it, assign this ring to ice_rx_ring::xdp_ring. Previous [0] approach of fixing this issue was for txonly scenario because of the described grouping of XDP rings across queue vectors. So, relying on Rx ring meant that NAPI context could be scheduled with a queue vector without XDP ring with associated XSK pool. [0]: https://lore.kernel.org/netdev/20220707161128.54215-1-maciej.fijalkowski@intel.com/ Fixes: 2d4238f55697 ("ice: Add support for AF_XDP") Fixes: 22bf877e528f ("ice: introduce XDP_TX fallback path") Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Tested-by: George Kuruvinakunnel <george.kuruvinakunnel@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-08-22ice: xsk: prohibit usage of non-balanced queue idMaciej Fijalkowski1-0/+6
Fix the following scenario: 1. ethtool -L $IFACE rx 8 tx 96 2. xdpsock -q 10 -t -z Above refers to a case where user would like to attach XSK socket in txonly mode at a queue id that does not have a corresponding Rx queue. At this moment ice's XSK logic is tightly bound to act on a "queue pair", e.g. both Tx and Rx queues at a given queue id are disabled/enabled and both of them will get XSK pool assigned, which is broken for the presented queue configuration. This results in the splat included at the bottom, which is basically an OOB access to Rx ring array. To fix this, allow using the ids only in scope of "combined" queues reported by ethtool. However, logic should be rewritten to allow such configurations later on, which would end up as a complete rewrite of the control path, so let us go with this temporary fix. [420160.558008] BUG: kernel NULL pointer dereference, address: 0000000000000082 [420160.566359] #PF: supervisor read access in kernel mode [420160.572657] #PF: error_code(0x0000) - not-present page [420160.579002] PGD 0 P4D 0 [420160.582756] Oops: 0000 [#1] PREEMPT SMP NOPTI [420160.588396] CPU: 10 PID: 21232 Comm: xdpsock Tainted: G OE 5.19.0-rc7+ #10 [420160.597893] Hardware name: Intel Corporation S2600WFT/S2600WFT, BIOS SE5C620.86B.02.01.0008.031920191559 03/19/2019 [420160.609894] RIP: 0010:ice_xsk_pool_setup+0x44/0x7d0 [ice] [420160.616968] Code: f3 48 83 ec 40 48 8b 4f 20 48 8b 3f 65 48 8b 04 25 28 00 00 00 48 89 44 24 38 31 c0 48 8d 04 ed 00 00 00 00 48 01 c1 48 8b 11 <0f> b7 92 82 00 00 00 48 85 d2 0f 84 2d 75 00 00 48 8d 72 ff 48 85 [420160.639421] RSP: 0018:ffffc9002d2afd48 EFLAGS: 00010282 [420160.646650] RAX: 0000000000000050 RBX: ffff88811d8bdd00 RCX: ffff888112c14ff8 [420160.655893] RDX: 0000000000000000 RSI: ffff88811d8bdd00 RDI: ffff888109861000 [420160.665166] RBP: 000000000000000a R08: 000000000000000a R09: 0000000000000000 [420160.674493] R10: 000000000000889f R11: 0000000000000000 R12: 000000000000000a [420160.683833] R13: 000000000000000a R14: 0000000000000000 R15: ffff888117611828 [420160.693211] FS: 00007fa869fc1f80(0000) GS:ffff8897e0880000(0000) knlGS:0000000000000000 [420160.703645] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [420160.711783] CR2: 0000000000000082 CR3: 00000001d076c001 CR4: 00000000007706e0 [420160.721399] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [420160.731045] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [420160.740707] PKRU: 55555554 [420160.745960] Call Trace: [420160.750962] <TASK> [420160.755597] ? kmalloc_large_node+0x79/0x90 [420160.762703] ? __kmalloc_node+0x3f5/0x4b0 [420160.769341] xp_assign_dev+0xfd/0x210 [420160.775661] ? shmem_file_read_iter+0x29a/0x420 [420160.782896] xsk_bind+0x152/0x490 [420160.788943] __sys_bind+0xd0/0x100 [420160.795097] ? exit_to_user_mode_prepare+0x20/0x120 [420160.802801] __x64_sys_bind+0x16/0x20 [420160.809298] do_syscall_64+0x38/0x90 [420160.815741] entry_SYSCALL_64_after_hwframe+0x63/0xcd [420160.823731] RIP: 0033:0x7fa86a0dd2fb [420160.830264] Code: c3 66 0f 1f 44 00 00 48 8b 15 69 8b 0c 00 f7 d8 64 89 02 b8 ff ff ff ff eb bc 0f 1f 44 00 00 f3 0f 1e fa b8 31 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 3d 8b 0c 00 f7 d8 64 89 01 48 [420160.855410] RSP: 002b:00007ffc1146f618 EFLAGS: 00000246 ORIG_RAX: 0000000000000031 [420160.866366] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007fa86a0dd2fb [420160.876957] RDX: 0000000000000010 RSI: 00007ffc1146f680 RDI: 0000000000000003 [420160.887604] RBP: 000055d7113a0520 R08: 00007fa868fb8000 R09: 0000000080000000 [420160.898293] R10: 0000000000008001 R11: 0000000000000246 R12: 000055d7113a04e0 [420160.909038] R13: 000055d7113a0320 R14: 000000000000000a R15: 0000000000000000 [420160.919817] </TASK> [420160.925659] Modules linked in: ice(OE) af_packet binfmt_misc nls_iso8859_1 ipmi_ssif intel_rapl_msr intel_rapl_common x86_pkg_temp_thermal intel_powerclamp mei_me coretemp ioatdma mei ipmi_si wmi ipmi_msghandler acpi_pad acpi_power_meter ip_tables x_tables autofs4 ixgbe i40e crct10dif_pclmul crc32_pclmul ghash_clmulni_intel aesni_intel crypto_simd cryptd ahci mdio dca libahci lpc_ich [last unloaded: ice] [420160.977576] CR2: 0000000000000082 [420160.985037] ---[ end trace 0000000000000000 ]--- [420161.097724] RIP: 0010:ice_xsk_pool_setup+0x44/0x7d0 [ice] [420161.107341] Code: f3 48 83 ec 40 48 8b 4f 20 48 8b 3f 65 48 8b 04 25 28 00 00 00 48 89 44 24 38 31 c0 48 8d 04 ed 00 00 00 00 48 01 c1 48 8b 11 <0f> b7 92 82 00 00 00 48 85 d2 0f 84 2d 75 00 00 48 8d 72 ff 48 85 [420161.134741] RSP: 0018:ffffc9002d2afd48 EFLAGS: 00010282 [420161.144274] RAX: 0000000000000050 RBX: ffff88811d8bdd00 RCX: ffff888112c14ff8 [420161.155690] RDX: 0000000000000000 RSI: ffff88811d8bdd00 RDI: ffff888109861000 [420161.168088] RBP: 000000000000000a R08: 000000000000000a R09: 0000000000000000 [420161.179295] R10: 000000000000889f R11: 0000000000000000 R12: 000000000000000a [420161.190420] R13: 000000000000000a R14: 0000000000000000 R15: ffff888117611828 [420161.201505] FS: 00007fa869fc1f80(0000) GS:ffff8897e0880000(0000) knlGS:0000000000000000 [420161.213628] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [420161.223413] CR2: 0000000000000082 CR3: 00000001d076c001 CR4: 00000000007706e0 [420161.234653] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [420161.245893] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [420161.257052] PKRU: 55555554 Fixes: 2d4238f55697 ("ice: Add support for AF_XDP") Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Tested-by: George Kuruvinakunnel <george.kuruvinakunnel@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-08-19Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski12-32/+140
No conflicts. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-19igc: add xdp frags support to ndo_xdp_xmitLorenzo Bianconi1-45/+83
Add the capability to map non-linear xdp frames in XDP_TX and ndo_xdp_xmit callback. Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Tested-by: Naama Meir <naamax.meir@linux.intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://lore.kernel.org/r/20220817173628.109102-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-19ixgbe: Manual AN-37 for troublesome link partners for X550 SFIJeff Daly2-3/+56
Some (Juniper MX5) SFP link partners exhibit a disinclination to autonegotiate with X550 configured in SFI mode. This patch enables a manual AN-37 restart to work around the problem. Signed-off-by: Jeff Daly <jeffd@silicom-usa.com> Tested-by: Dave Switzer <david.switzer@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-08-18igb: Add lock to avoid data raceLin Ma2-1/+13
The commit c23d92b80e0b ("igb: Teardown SR-IOV before unregister_netdev()") places the unregister_netdev() call after the igb_disable_sriov() call to avoid functionality issue. However, it introduces several race conditions when detaching a device. For example, when .remove() is called, the below interleaving leads to use-after-free. (FREE from device detaching) | (USE from netdev core) igb_remove | igb_ndo_get_vf_config igb_disable_sriov | vf >= adapter->vfs_allocated_count? kfree(adapter->vf_data) | adapter->vfs_allocated_count = 0 | | memcpy(... adapter->vf_data[vf] Moreover, the igb_disable_sriov() also suffers from data race with the requests from VF driver. (FREE from device detaching) | (USE from requests) igb_remove | igb_msix_other igb_disable_sriov | igb_msg_task kfree(adapter->vf_data) | vf < adapter->vfs_allocated_count adapter->vfs_allocated_count = 0 | To this end, this commit first eliminates the data races from netdev core by using rtnl_lock (similar to commit 719479230893 ("dpaa2-eth: add MAC/PHY support through phylink")). And then adds a spinlock to eliminate races from driver requests. (similar to commit 1e53834ce541 ("ixgbe: Add locking to prevent panic when setting sriov_numvfs to zero") Fixes: c23d92b80e0b ("igb: Teardown SR-IOV before unregister_netdev()") Signed-off-by: Lin Ma <linma@zju.edu.cn> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://lore.kernel.org/r/20220817184921.735244-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-18ixgbe: Don't call kmap() on page allocated with GFP_ATOMICFabio M. De Francesco1-3/+1
Pages allocated with GFP_ATOMIC cannot come from Highmem. This is why there is no need to call kmap() on them. Therefore, don't call kmap() on rx_buffer->page() and instead use a plain page_address() to get the kernel address. Suggested-by: Ira Weiny <ira.weiny@intel.com> Suggested-by: Alexander Duyck <alexander.duyck@gmail.com> Signed-off-by: Fabio M. De Francesco <fmdefrancesco@gmail.com> Reviewed-by: Ira Weiny <ira.weiny@intel.com> Reviewed-by: Alexander Duyck <alexanderduyck@fb.com> Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-08-18ice: remove non-inclusive languageMikael Barsehyan2-9/+9
Remove non-inclusive language from the driver where possible; replace "master" with "primary"; replace "slave" with "secondary". Signed-off-by: Mikael Barsehyan <mikael.barsehyan@intel.com> Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-08-18ice: Remove ucast_sharedSylwester Dziedziuch3-165/+5
Remove ucast_shared as it was always true. Remove the code depending on ucast_shared from ice_add_mac and ice_remove_mac. Remove ice_find_ucast_rule_entry function as it was only used when ucast_shared was set to false. Signed-off-by: Sylwester Dziedziuch <sylwesterx.dziedziuch@intel.com> Signed-off-by: Jedrzej Jagielski <jedrzej.jagielski@intel.com> Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-08-18ice: Allow 100M speeds for some devicesAnirudh Venkataramanan3-4/+28
For certain devices, 100M speeds are supported. Do not mask off 100M speed for these devices. Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com> Co-developed-by: Chinh T Cao <chinh.t.cao@intel.com> Signed-off-by: Chinh T Cao <chinh.t.cao@intel.com> Signed-off-by: Mikael Barsehyan <mikael.barsehyan@intel.com> Tested-by: Kavya AV <kavyax.av@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-08-18ice: Implement FCS/CRC and VLAN stripping co-existence policyAnatolii Gerasymenko1-0/+25
Make sure that only the valid combinations of FCS/CRC stripping and VLAN stripping offloads are allowed. You cannot have FCS/CRC stripping disabled while VLAN stripping is enabled - this breaks the correctness of the FCS/CRC. If administrator tries to enable VLAN stripping when FCS/CRC stripping is disabled, the request should be rejected. If administrator tries to disable FCS/CRC stripping when VLAN stripping is enabled, the request should be rejected if VLANs are configured. If there is no VLAN configured, then both FCS/CRC and VLAN stripping should be disabled. Testing Hints: The default settings after driver load are: - VLAN C-Tag offloads are enabled - VLAN S-Tag offloads are disabled - FCS/CRC stripping is enabled Restore the default settings before each test with the command: ethtool -K eth0 rx-fcs off rxvlan on txvlan on rx-vlan-stag-hw-parse off tx-vlan-stag-hw-insert off Test 1: Disable FCS/CRC and VLAN stripping: ethtool -K eth0 rx-fcs on rxvlan off Try to enable VLAN stripping: ethtool -K eth0 rxvlan on Expected: VLAN stripping request is rejected Test 2: Try to disable FCS/CRC stripping: ethtool -K eth0 rx-fcs on Expected: VLAN stripping is also disabled, as there are no VLAN configured Test 3: Add a VLAN: ip link add link eth0 eth0.42 type vlan id 42 ip link set eth0 up Try to disable FCS/CRC stripping: ethtool -K eth0 rx-fcs on Expected: FCS/CRC stripping request is rejected Signed-off-by: Anatolii Gerasymenko <anatolii.gerasymenko@intel.com> Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-08-18ice: Implement control of FCS/CRC strippingJesse Brandeburg7-6/+69
The driver can allow the user to configure whether the CRC aka the FCS (Frame Check Sequence) is DMA'd to the host as part of the receive buffer. The driver usually wants this feature disabled so that the hardware checks the FCS and strips it in order to save PCI bandwidth. Control the reception of FCS to the host using the command: ethtool -K eth0 rx-fcs <on|off> The default shown in ethtool -k eth0 | grep fcs; should be "off", as the hardware will drop any frame with a bad checksum, and DMA of the checksum is useless overhead especially for small packets. Testing Hints: test the FCS/CRC arrives with received packets using tcpdump -nnpi eth0 -xxxx and it should show crc data as the last 4 bytes of the packet. Can also use wireshark to turn on CRC checking and check the data is correct. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Co-developed-by: Grzegorz Nitka <grzegorz.nitka@intel.com> Signed-off-by: Grzegorz Nitka <grzegorz.nitka@intel.com> Co-developed-by: Benjamin Mikailenko <benjamin.mikailenko@intel.com> Signed-off-by: Benjamin Mikailenko <benjamin.mikailenko@intel.com> Co-developed-by: Anatolii Gerasymenko <anatolii.gerasymenko@intel.com> Signed-off-by: Anatolii Gerasymenko <anatolii.gerasymenko@intel.com> Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-08-17ice: Fix VF not able to send tagged traffic with no VLAN filtersSylwester Dziedziuch2-11/+57
VF was not able to send tagged traffic when it didn't have any VLAN interfaces and VLAN anti-spoofing was enabled. Fix this by allowing VFs with no VLAN filters to send tagged traffic. After VF adds a VLAN interface it will be able to send tagged traffic matching VLAN filters only. Testing hints: 1. Spawn VF 2. Send tagged packet from a VF 3. The packet should be sent out and not dropped 4. Add a VLAN interface on VF 5. Send tagged packet on that VLAN interface 6. Packet should be sent out and not dropped 7. Send tagged packet with id different than VLAN interface 8. Packet should be dropped Fixes: daf4dd16438b ("ice: Refactor spoofcheck configuration functions") Signed-off-by: Sylwester Dziedziuch <sylwesterx.dziedziuch@intel.com> Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-08-17ice: Ignore error message when setting same promiscuous modeBenjamin Mikailenko1-4/+4
Commit 1273f89578f2 ("ice: Fix broken IFF_ALLMULTI handling") introduced new checks when setting/clearing promiscuous mode. But if the requested promiscuous mode setting already exists, an -EEXIST error message would be printed. This is incorrect because promiscuous mode is either on/off and shouldn't print an error when the requested configuration is already set. This can happen when removing a bridge with two bonded interfaces and promiscuous most isn't fully cleared from VLAN VSI in hardware. Fix this by ignoring cases where requested promiscuous mode exists. Fixes: 1273f89578f2 ("ice: Fix broken IFF_ALLMULTI handling") Signed-off-by: Benjamin Mikailenko <benjamin.mikailenko@intel.com> Signed-off-by: Grzegorz Siwik <grzegorz.siwik@intel.com> Link: https://lore.kernel.org/all/CAK8fFZ7m-KR57M_rYX6xZN39K89O=LGooYkKsu6HKt0Bs+x6xQ@mail.gmail.com/ Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-08-17ice: Fix clearing of promisc mode with bridge over bondGrzegorz Siwik2-2/+16
When at least two interfaces are bonded and a bridge is enabled on the bond, an error can occur when the bridge is removed and re-added. The reason for the error is because promiscuous mode was not fully cleared from the VLAN VSI in the hardware. With this change, promiscuous mode is properly removed when the bridge disconnects from bonding. [ 1033.676359] bond1: link status definitely down for interface enp95s0f0, disabling it [ 1033.676366] bond1: making interface enp175s0f0 the new active one [ 1033.676369] device enp95s0f0 left promiscuous mode [ 1033.676522] device enp175s0f0 entered promiscuous mode [ 1033.676901] ice 0000:af:00.0 enp175s0f0: Error setting Multicast promiscuous mode on VSI 6 [ 1041.795662] ice 0000:af:00.0 enp175s0f0: Error setting Multicast promiscuous mode on VSI 6 [ 1041.944826] bond1: link status definitely down for interface enp175s0f0, disabling it [ 1041.944874] device enp175s0f0 left promiscuous mode [ 1041.944918] bond1: now running without any active interface! Fixes: c31af68a1b94 ("ice: Add outer_vlan_ops and VSI specific VLAN ops implementations") Co-developed-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Grzegorz Siwik <grzegorz.siwik@intel.com> Link: https://lore.kernel.org/all/CAK8fFZ7m-KR57M_rYX6xZN39K89O=LGooYkKsu6HKt0Bs+x6xQ@mail.gmail.com/ Tested-by: Jaroslav Pulchart <jaroslav.pulchart@gooddata.com> Tested-by: Igor Raits <igor@gooddata.com> Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-08-17ice: Ignore EEXIST when setting promisc modeGrzegorz Siwik1-1/+1
Ignore EEXIST error when setting promiscuous mode. This fix is needed because the driver could set promiscuous mode when it still has not cleared properly. Promiscuous mode could be set only once, so setting it second time will be rejected. Fixes: 5eda8afd6bcc ("ice: Add support for PF/VF promiscuous mode") Signed-off-by: Grzegorz Siwik <grzegorz.siwik@intel.com> Link: https://lore.kernel.org/all/CAK8fFZ7m-KR57M_rYX6xZN39K89O=LGooYkKsu6HKt0Bs+x6xQ@mail.gmail.com/ Tested-by: Jaroslav Pulchart <jaroslav.pulchart@gooddata.com> Tested-by: Igor Raits <igor@gooddata.com> Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-08-17ice: Fix double VLAN error when entering promisc modeGrzegorz Siwik1-0/+7
Avoid enabling or disabling VLAN 0 when trying to set promiscuous VLAN mode if double VLAN mode is enabled. This fix is needed because the driver tries to add the VLAN 0 filter twice (once for inner and once for outer) when double VLAN mode is enabled. The filter program is rejected by the firmware when double VLAN is enabled, because the promiscuous filter only needs to be set once. This issue was missed in the initial implementation of double VLAN mode. Fixes: 5eda8afd6bcc ("ice: Add support for PF/VF promiscuous mode") Signed-off-by: Grzegorz Siwik <grzegorz.siwik@intel.com> Link: https://lore.kernel.org/all/CAK8fFZ7m-KR57M_rYX6xZN39K89O=LGooYkKsu6HKt0Bs+x6xQ@mail.gmail.com/ Tested-by: Jaroslav Pulchart <jaroslav.pulchart@gooddata.com> Tested-by: Igor Raits <igor@gooddata.com> Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-08-16ice: introduce ice_ptp_reset_cached_phctime functionJacob Keller1-23/+76
If the PTP hardware clock is adjusted, the ice driver must update the cached PHC timestamp. This is required in order to perform timestamp extension on the shorter timestamps captured by the PHY. Currently, we simply call ice_ptp_update_cached_phctime in the settime and adjtime callbacks. This has a few issues: 1) if ICE_CFG_BUSY is set because another thread is updating the Rx rings, we will exit with an error. This is not checked, and the functions do not re-schedule the update. This could leave the cached timestamp incorrect until the next scheduled work item execution. 2) even if we did handle an update, any currently outstanding Tx timestamp would be extended using the wrong cached PHC time. This would produce incorrect results. To fix these issues, introduce a new ice_ptp_reset_cached_phctime function. This function calls the ice_ptp_update_cached_phctime, and discards outstanding Tx timestamps. If the ice_ptp_update_cached_phctime function fails because ICE_CFG_BUSY is set, we log a warning and schedule the thread to execute soon. The update function is modified so that it always updates the cached copy in the PF regardless. This ensures we have the most up to date values possible and minimizes the risk of a packet timestamp being extended with the wrong value. It would be nice if we could skip reporting Rx timestamps until the cached values are up to date. However, we can't access the Rx rings while ICE_CFG_BUSY is set because they are actively being updated by another thread. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-08-16ice: re-arrange some static functions in ice_ptp.cJacob Keller1-336/+336
A following change is going to want to make use of ice_ptp_flush_tx_tracker earlier in the ice_ptp.c file. To make this work, move the Tx timestamp tracking functions higher up in the file, and pull the ice_ptp_update_cached_timestamp function below them. This should have no functional change. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-08-16ice: track and warn when PHC update is lateJacob Keller3-3/+34
The ice driver requires a cached copy of the PHC time in order to perform timestamp extension on Tx and Rx hardware timestamp values. This cached PHC time must always be updated at least once every 2 seconds. Otherwise, the math used to perform the extension would produce invalid results. The updates are supposed to occur periodically in the PTP kthread work item, which is scheduled to run every half second. Thus, we do not expect an update to be delayed for so long. However, there are error conditions which can cause the update to be delayed. Track this situation by using jiffies to determine approximately how long ago the last update occurred. Add a new statistic and a dev_warn when we have failed to update the cached PHC time. This makes the error case more obvious. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-08-16ice: track Tx timestamp stats similar to other Intel driversJacob Keller4-4/+20
Several Intel networking drivers which support PTP track when Tx timestamps are skipped or when they timeout without a timestamp from hardware. The conditions which could cause these events are rare, but it can be useful to know when and how often they occur. Implement similar statistics for the ice driver, tx_hwtstamp_skipped, tx_hwtstamp_timeouts, and tx_hwtstamp_flushed. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-08-16ice: initialize cached_phctime when creating Rx ringsJacob Keller2-0/+2
When we create new Rx rings, the cached_phctime field is zero initialized. This could result in incorrect timestamp reporting due to the cached value not yet being updated. Although a background task will periodically update the cached value, ensure it matches the existing cached value in the PF structure at ring initialization. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-08-16ice: set tx_tstamps when creating new Tx rings via ethtoolJacob Keller1-0/+1
When the user changes the number of queues via ethtool, the driver allocates new rings. This allocation did not initialize tx_tstamps. This results in the tx_tstamps field being zero (due to kcalloc allocation), and would result in a NULL pointer dereference when attempting a transmit timestamp on the new ring. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2022-08-16i40e: Fix to stop tx_timeout recovery if GLOBR failsAlan Brady1-1/+3
When a tx_timeout fires, the PF attempts to recover by incrementally resetting. First we try a PFR, then CORER and finally a GLOBR. If the GLOBR fails, then we keep hitting the tx_timeout and incrementing the recovery level and issuing dmesgs, which is both annoying to the user and accomplishes nothing. If the GLOBR fails, then we're pretty much totally hosed, and there's not much else we can do to recover, so this makes it such that we just kill the VSI and stop hitting the tx_timeout in such a case. Fixes: 41c445ff0f48 ("i40e: main driver core") Signed-off-by: Alan Brady <alan.brady@intel.com> Signed-off-by: Mateusz Palczewski <mateusz.palczewski@intel.com> Tested-by: Gurucharan <gurucharanx.g@intel.com> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-27 01:09:24 +0300