summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/intel/ixgbe/ixgbe_82598.c
AgeCommit message (Collapse)AuthorFilesLines
2013-07-31ixgbe: add support for quad-port x520 adapterDon Skidmore1-1/+1
This is a x520 based quad-port (4x10Gbps) NIC with a single QSFP+ connector. Changes were required to our identify functions due to different eeprom address which is also included here. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-07-31ixgbe: fix semaphore lock for I2C read/writes on 82598Emil Tantilov1-10/+22
ixgbe_read/write_i2c_phy_82598() does not hold the SWFW_SYNC semaphore for the entire function. Instead the lock is held only during the phy.ops.read/write_reg operations. As result when the function is being called simultaneously the I2C read/writes can be corrupted. The following patch introduces the SWFW_SYNC semaphore for the entire ixgbe_read/write_i2c_phy_82598() function. To accomplish this I had to create 2 separate functions: ixgbe_read_phy_reg_mdi() ixgbe_write_phy_reg_mdi() Those functions are identical to ixgbe_read/write_phy_reg_generic() sans the locking, and can be used in ixgbe_read/write_i2c_phy_82598() with the SWFW_SYNC semaphore being held. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-04-18ixgbe: fix MNG FW support when adapter not upDon Skidmore1-0/+1
We were only turning the laser on when the adapter was up. This causes issues for those who wanted to access the MNG FW while the port was in a down state. This patch makes sure the laser is turned on in probe and remain up even after the port is brought down. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-02-05ixgbe: update date to 2013Don Skidmore1-1/+1
Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-02-05ixgbe: allow reading of SFF-8472 data over i2cEmil Tantilov1-7/+38
This patch adds functions needed for reading SFF-8472 diagnostic data from SFP modules. Based on original patch from Aurélien Guillaume <footplus@gmail.com> CC: Aurélien Guillaume <footplus@gmail.com> Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2013-02-01ixgbe: autoneg variable refactoringJosh Hay1-7/+3
Removes the autoneg parameter from the setup_link functions. Adds local variable autoneg to setup_link functions to be passed to get_link_capabilities functions if needed. Signed-off-by: Josh Hay <joshua.a.hay@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
2013-02-01ixgbe: removed unused variable from setup_link_speedJosh Hay1-1/+1
Removes the autoneg parameter from the setup_link_speed functions. These functions do nothing with this parameter. Signed-off-by: Josh Hay <joshua.a.hay@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-05-04ixgbe: Update link flow control to correctly handle multiple packet buffer DCBAlexander Duyck1-30/+31
This change updates the link flow control configuration so that we correctly set the link flow control settings for DCB. Previously we would have to call the fc_enable call 8 times, once for each packet buffer. If we move that logic into the fc_enable call itself we can avoid multiple unnecessary register writes. This change also corrects an issue in which we were only shifting the water marks for 82599 parts by 6 instead of 10. This was resulting in us only using 1/16 of the packet buffer when flow control was enabled. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Ross Brattain <ross.b.brattain@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-05-04ixgbe: Make ixgbe_fc_autoneg return void and always set current_modeAlexander Duyck1-3/+1
This change makes it so that ixgbe_fc_autoneg is a void and always sets the current_mode. Previously if the link was down we would return an error, however there is no harm in simply treating a link down case as a case in which autoneg simply failed. This allows us to rely on the return value of the ixgbe_fc_enable call now since there should be no cases where it returns an error that would normally be ignored. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Ross Brattain <ross.b.brattain@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-05-02ixgbe: add hwmon interface to export thermal dataDon Skidmore1-0/+2
Some of our adapters have thermal data available, this patch exports this data via hwmon sysfs interface. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Tested-by: Stephen Ko <stephen.s.ko@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-04-04ixgbe: consolidate reporting of MSIX vectors into a single functionEmil Tantilov1-24/+1
This patch modifies ixgbe_get_pcie_msix_count_generic() to support all current HW and removes the 82598 specific function. - change the type of ixgbe_get_pcie_msix_count_generic() to u16 - include a check to make sure the maximum allowed number of vectors is not exceeded. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-03-14ixgbe: Do not disable read relaxed ordering when DCA is enabledAlexander Duyck1-3/+3
A previous fix had gone though and disabled relaxed ordering for Rx descriptor read fetching. This was not necessary as this functions correctly and has no ill effects on the system. In addition several of the defines used for the DCA control registers were incorrect in that they indicated descriptor effects when they actually had an impact on either data or header write back. As such I have update these to correctly reflect either DATA or HEAD. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Stephen Ko <stephen.s.ko@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-02-13drivers/net: Remove boolean comparisons to true/falseJoe Perches1-2/+2
Booleans should not be compared to true or false but be directly tested or tested with !. Done via cocci script: @@ bool t; @@ - t == true + t @@ bool t; @@ - t != true + !t @@ bool t; @@ - t == false + !t @@ bool t; @@ - t != false + t Signed-off-by: Joe Perches <joe@perches.com> Reviewed-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-03ixgbe: update copyright to 2012Don Skidmore1-1/+1
New year so bump the copyright date. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-10-17ixgbe: allow eeprom writes via ethtoolEmil Tantilov1-0/+2
Implement support for ethtool -E Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Tested-by: Stephen Ko <stephen.s.ko@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-10-05ixgbe: remove instances of ixgbe_phy_aq for 82598 and 82599Emil Tantilov1-2/+0
82598 and 82599 do not ship with this type of PHY Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Stephen Ko <stephen.s.ko@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-10-05ixgbe: do not disable flow control in ixgbe_check_mac_linkEmil Tantilov1-5/+0
Disabling flow control in ixgbe_check_mac_link() results in incorrect reporting by ethtool when link goes down, so remove it. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-09-29ixgbe: update {P}FC thresholds to account for X540 and loopbackJohn Fastabend1-6/+2
Revise high and low threshold marks wrt flow control to account for the X540 devices and latency introduced by the loopback switch. Without this it was in theory possible to drop frames on a supposedly lossless link with X540 or SR-IOV enabled. Previously we used a magic number in a define to calculate the threshold values. This made it difficult to sort out exactly which latencies were or were not being accounted for. Here I was overly explicit and tried to used #define names that would be recognizable after reading the IEEE 802.1Qbb specification. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Tested-by: Ross Brattain <ross.b.brattain@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-09-23ixgbe: avoid HW lockup when adapter is reset with Tx work pendingEmil Tantilov1-10/+5
This change is meant to avoid a hardware lockup when Tx work is still pending and we request a reset. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-09-16ixgbe: cleanup reset pathsAlexander Duyck1-8/+5
The reset paths are overly complicated and are either missing steps or contain extra unnecessary steps such as reading MAC address twice. This change is meant to help clean up the reset paths an get things functioning correctly. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2011-08-11intel: Move the Intel wired LAN driversJeff Kirsher1-0/+1353
Moves the Intel wired LAN drivers into drivers/net/ethernet/intel/ and the necessary Kconfig and Makefile changes. Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-29 07:48:52 +0300