summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/intel/i40e/i40e_adminq.c
AgeCommit message (Collapse)AuthorFilesLines
2020-07-01ethernet/intel: Convert fallthrough code commentsJeff Kirsher1-1/+1
Convert all the remaining 'fall through" code comments to the newer 'fallthrough;' keyword. Suggested-by: Joe Perches <joe@perches.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2020-05-29i40e: Make i40e_shutdown_adminq() return voidJason Yan1-5/+1
Fix the following coccicheck warning: drivers/net/ethernet/intel/i40e/i40e_adminq.c:699:13-21: Unneeded variable: "ret_code". Return "0" on line 710 Signed-off-by: Jason Yan <yanaijie@huawei.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2020-01-09i40e: Set PHY Access flag on X722Adam Ludkiewicz1-0/+5
The X722 FW API version 1.9 adds support for accessing PHY registers with Admin Queue Command. This enables reading EEPROM data from (Q)SFP+ transceivers, what was previously possible only on X710 devices. Signed-off-by: Adam Ludkiewicz <adam.ludkiewicz@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-10-25i40e: Extract detection of HW flags into a functionPiotr Azarewicz1-13/+58
Move code detecting HW flags based on device type and FW API version into a single function. Signed-off-by: Piotr Azarewicz <piotr.azarewicz@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-08-22i40e: Add drop mode parameter to set mac configSylwia Wnuczko1-1/+3
This patch adds "drop mode" parameter to set mac config AQ command. This bit controls the behavior when a no-drop packet is blocking a TC queue. 0 – The PF driver is notified. 1 – The blocking packet is dropped and then the PF driver is notified. Signed-off-by: Sylwia Wnuczko <sylwia.wnuczko@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-06-14i40e: Improve AQ log granularityDoug Dziggel1-4/+4
This patch makes it possible to log only AQ descriptors, without the entire AQ message buffers being dumped too. It should greatly reduce kernel log size in cases where a full AQ dump is not needed. Selection is made by setting flags in hw->debug_mask. Additionally, some debug messages that preceded an AQ dump have been moved to I40E_DEBUG_AQ_COMMAND class, which seems more appropriate. Signed-off-by: Doug Dziggel <douglas.a.dziggel@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-05-04i40e: Further implementation of LLDPAleksandr Loktionov1-0/+5
This code implements driver code changes necessary for LLDP Agent support. Modified i40e_aq_start_lldp() and i40e_aq_stop_lldp() adding false parameter whether LLDP state should be persistent across power cycles. Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2019-04-17i40e: Fix misleading error messageCarolyn Wyborny1-1/+1
This patch changes an error code for an admin queue head overrun to use I40E_ERR_ADMIN_QUEUE_FULL instead of I40E_ERR_QUEUE_EMPTY. Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-11-14i40e: Add capability flag for stopping FW LLDPKrzysztof Galazka1-0/+6
Add HW capability flag to indicate that firmware supports stopping LLDP agent. This feature has been added in FW API 1.7 for XL710 devices and 1.6 for X722. Also raise expected minor version number for X722 FW API to 6. Signed-off-by: Krzysztof Galazka <krzysztof.galazka@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-08-07i40e: Add additional return code to i40e_asq_send_commandPiotr Azarewicz1-0/+2
Firmware can return a busy state, so the function return I40E_ERR_NOT_READY. Signed-off-by: Piotr Azarewicz <piotr.azarewicz@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-04-27net: intel: Cleanup the copyright/license headersJeff Kirsher1-25/+1
After many years of having a ~30 line copyright and license header to our source files, we are finally able to reduce that to one line with the advent of the SPDX identifier. Also caught a few files missing the SPDX license identifier, so fixed them up. Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Acked-by: Shannon Nelson <shannon.nelson@oracle.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-23intel: add SPDX identifiers to all the Intel driversJeff Kirsher1-0/+1
Add the SPDX identifiers to all the Intel wired LAN driver files, as outlined in Documentation/process/license-rules.rst. Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-27i40e: cleanup unnecessary parensJeff Kirsher1-1/+1
Clean up unnecessary parenthesis. Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com>
2018-01-27i40e: Add returning AQ critical error to SWMichal Kosiarz1-4/+9
The FW has the ability to return a critical error on every AQ command. When this critical error occurs then we need to send the correct response to the caller. Signed-off-by: Michal Kosiarz <michal.kosiarz@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2018-01-23i40e/i40evf: Enable NVMUpdate to retrieve AdminQ and add preservation flags ↵Pawel Jablonski1-1/+1
for NVM update This patch adds new I40E_NVMUPD_GET_AQ_EVENT state to allow retrieval of AdminQ events as a result of AdminQ commands sent to firmware. Add preservation flags support on X722 devices for NVM update AdminQ function wrapper. Add new parameter and handling to nvmupdate admin queue function intended to allow nvmupdate tool to configure the preservation flags in the AdminQ command. This is required to implement FlatNVM on X722 devices. Signed-off-by: Pawel Jablonski <pawel.jablonski@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-11-22i40e: Fix for NUP NVM image downgrade failureJacob Keller1-0/+6
Since commit 96a39aed25e6 ("i40e: Acquire NVM lock before reads on all devices") we've used the NVM lock to synchronize NVM reads even on devices which don't strictly need the lock. Doing so can cause a regression on older firmware prior to 1.5, especially when downgrading the firmware. Fix this by only grabbing the lock if we're running on an X722 device (which requires the lock as it uses the AdminQ to read the NVM), or if we're currently running 1.5 or newer firmware. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-10-02i40e: Stop dropping 802.1ad tags - eth proto 0x88a8Scott Peterson1-0/+6
Enable i40e to pass traffic with VLAN tags using the 802.1ad ethernet protocol ID (0x88a8). This requires NIC firmware providing version 1.7 of the API. With older NIC firmware 802.1ad tagged packets will continue to be dropped. No VLAN offloads nor RSS are supported for 802.1ad VLANs. Signed-off-by: Scott Peterson <scott.d.peterson@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-10-02i40e: use admin queue for setting LEDs behaviorMariusz Stachura1-0/+6
Instead of accessing register directly, use newly added AQC in order to blink LEDs. Introduce and utilize a new flag to prevent excessive API version checking. Signed-off-by: Mariusz Stachura <mariusz.stachura@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2017-04-20i40e: reduce wait time for adminq command completionJacob Keller1-2/+2
When sending an adminq command, we wait for the command to complete in a loop. This loop waits for an entire millisecond, when in practice the adminq command is processed often much faster. Change the loop to use i40e_usec_delay instead, and wait for 50 usecs each time instead. This appears to be about the minimum time required, based on some manual observation and testing. The primary benefit of this change is reducing latency of various operations in the PF driver, especially when related to having a large number of VFs enabled. For example, on Linux, when instantiating 128 VFs, the time to finish the operation dropped from about 9 seconds down to under 6 seconds. Additionally, the time it takes to finish a PF reset with 128 VFs dropped from 5.1 seconds down to 0.7 seconds. As the examples above show, a significant portion of the delay is wasted waiting for admiqn operations which have already finished. This patch shouldn't cause impact to functionality, as we still check and keep waiting until the command does get processed. The only expected change is an increase in CPU utilization as we now check for completion far more times. However, in practice the commands appear to generally be complete within the first delay window anyways. Change-ID: If8af8388e100da0a14eaf9e1af3afadf73a958cf Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-11-01i40e: Implementation of ERROR state for NVM update state machineMaciej Sosin1-2/+2
This patch adds I40E_NVMUPD_STATE_ERROR state for NVM update. Without this patch driver has no possibility to return NVM image write failure.This state is being set when ARQ rises error. arq_last_status is also updated every time when ARQ event comes, not only on error cases. Change-ID: I67ce43ba22a240773c2821b436e96054db0b7c81 Signed-off-by: Maciej Sosin <maciej.sosin@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-05-02i40e: Remove HMC AQ API implementationNeerav Parikh1-4/+0
Remove the code that implements the HMC AQ APIs and call these APIs. This is done because these are obsolete APIs and are not supported by firmware. Change-ID: I5d771d8f37c3e16e7b0a972ff9b27e75aa2d05d4 Signed-off-by: Neerav Parikh <neerav.parikh@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-04-07i40e: Move NVM event wait check to NVM codeShannon Nelson1-30/+1
The logic that checks AQ events for NVM done events is better kept in nvm.c with the rest of the nvmupdate handling code. Change-ID: I2ea58980df8ecaa3726b28a37bff3dfcb8df03dc Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-04-07i40e: Move NVM variable out of AQ structShannon Nelson1-3/+3
The NVM update status info should stay collected together, not spread across different structs. Change-ID: Ic16f9e9fd79945d865bb7226184c889884585025 Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2016-02-18i40e: clean event descriptor before useShannon Nelson1-9/+11
In one obscure corner case, it was possible to clear the NVM update wait flag when no update_done message was actually received. This patch cleans the event descriptor before use, and moves the opcode check to where it won't get done if there was no event to clean. Also update copyright year in file headers. Change-ID: I68bbc41965e93f4adf07cbe98b9dfd63d41509a4 Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-12-04i40e/i40evf: avoid mutex re-initJesse Brandeburg1-6/+0
If the driver were to happen to have a mutex held while the i40e_init_adminq call was called, the init_adminq might inadvertently call mutex_init on a lock that was held which is a violation of the calling semantics. Fix this by avoiding adminq.c code allocating/freeing this memory, and then do the same work only once in probe/remove. Testing Hints (Required if no HSD): for VF, load i40evf in bare metal and echo 32 > sriov_numvfs; echo 0 > sriov_numvfs in a loop. Yes this is a horrible thing to do. Change-ID: Ida263c51b34e195252179e7e5e400d73a99be7a2 Reported-by: Stefan Assmann <sassmann@redhat.com> Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-10-20Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-2/+2
Conflicts: drivers/net/usb/asix_common.c net/ipv4/inet_connection_sock.c net/switchdev/switchdev.c In the inet_connection_sock.c case the request socket hashing scheme is completely different in net-next. The other two conflicts were overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-14i40e/i40evf: Add info to nvm info struct for OEM version dataCarolyn Wyborny1-1/+8
This patch adds a member to the nvm_info struct for oem_ver info to be output either by OID or ethtool. Change-ID: I1e5d513ae67622e2af17042924fdb4b5d6d85366 Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-10-09i40e/i40evf: clean up some codeJesse Brandeburg1-2/+1
Add missings spaces after declarations, remove another __func__ use, remove uncessary braces, remove unneeded breaks, and useless returns, and generally fix up some code. Change-ID: Ie715d6b64976c50e1c21531685fe0a2bd38c4244 Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-10-07i40e/i40evf: assure clean asq status reportShannon Nelson1-0/+2
There was a possibility where the asq_last_status could get through without update and thus report a previous error. I don't think we've actually seen this happen, but this patch will help make sure it doesn't. Change-ID: I9e33927052a5ee6ea21f80b66d4c4b76c2760b17 Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Signed-off-by: Christopher Pau <christopher.pau@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-10-07i40e/i40evf: set AQ count after memory allocationMitch Williams1-2/+2
The standard way to check if the AQ is enabled is to look at the count field. So we should only set this field after we have successfully allocated memory. To do otherwise is to incite panic among the populace. Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-10-04i40e/i40evf: grab the AQ spinlocks before clearing registersShannon Nelson1-22/+23
Make sure we have the spinlocks before we clear the ARQ and ASQ management registers. Also, widen the locked portion and make a sanity check earlier in the send function to be sure we're working with safe register values. Change-ID: I34b56044b33461ed780f3d2de8d62826cdf933f9 Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-10-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-0/+9
Conflicts: net/dsa/slave.c net/dsa/slave.c simply had overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-29i40e/i40evf: check for stopped admin queueMitch Williams1-0/+9
It's possible that while we are waiting for the spinlock, another entity (that owns the spinlock) has shut down the admin queue. If we then attempt to use the queue, we will panic. Add a check for this condition on the receive side. This matches an existing check on the send queue side. Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Acked-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-09-18i40e/i40evf: add exec_aq command to nvmupdate utilityShannon Nelson1-0/+3
Add a facility to run AQ commands through the nvmupdate utility in order to allow the update tools to interact with the FW and do special commands needed for updates and configuration changes. Change-ID: I5c41523e4055b37f8e4ee479f7a0574368f4a588 Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-09-18i40e/i40evf: add wait states to NVM state machineShannon Nelson1-0/+13
This adds wait states to the NVM update state machine to signify when waiting for an update operation to finish, whether we're in the middle of a set of Write operations, or we're now idle but waiting. Change-ID: Iabe91d6579ef6a2ea560647e374035656211ab43 Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-09-18i40e/i40evf: save aq writeback for future inspectionShannon Nelson1-0/+4
Add the ability to save the AdminQ write back descriptor if a caller supplies a buffer for it to be saved into. Change-ID: I3d1301d26360b39a2d66dc8569e851f54133a3af Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-03-05i40e/i40evf: grab NVM devstarter version not image versionShannon Nelson1-1/+2
0x2A is the NVM version so it has useful data but it is per image version every image can have a different one. 0x18 is the dev starter version which all the images for release will have the same version. Of the two 0x18 is more useful and is what should be displayed. Change-ID: Idf493da13a42ab211e2de0bef287f5de51033cca Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-03-03i40e/i40evf: print FW build number in version stringShannon Nelson1-0/+1
Include the FW build number in the formatted FW version string. In order to fit within ethtool's 32 character limit, the etrack's unused high order bits are trimmed as is the leading 0 for the NVM version. This leaves us with 2 character left for if/when the etrack id goes to 5 hex chars and the NVM major number goes to 2 chars. Change-ID: Icb004c4b9b14a2f54dd200b467fcc1d7b9297308 Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-12-09i40e: init NVM update state on adminq initShannon Nelson1-0/+2
The adminq init is run after the EMPR that is triggered by the NVM update. The final write command will cause the reset and will want to wait for the ARQ event that signals the end of the update, but the reset precludes the event being sent. The state is probably already at INIT, but we set it so here anyway, and clear the release_on_done flag as well. Change-ID: Ie9d724a39e71f988741abc3d51b4cb198c7e0272 Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Acked-by: Michal Kosiarz <michal.kosiarz@intel.com> Acked-by: Kamil Krawczyk <kamil.krawczyk@intel.com> Tested-by: Jim Young <jamesx.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-12-09i40e: let firmware catch the NVM busy errorShannon Nelson1-11/+0
The NVM update operations take time finish asynchronously, and follow-on update requests need to wait for the current one to finish. Early firmware didn't handle this well, so the code had to track the busy state. The released firmware handles the busy state correctly, returning I40E_AQ_RC_EBUSY if an update is still in progress, so the code no longer needs to track this. Change-ID: I6e6b4adc26d6dcc5fd7adfee5763423858a7d921 Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Acked-by: Greg Rose <gregory.v.rose@intel.com> Tested-by: Jim Young <jamesx.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-12-06i40e: Define and use i40e_is_vf macroAnjali Singhai Jain1-1/+1
This patch is useful for future expansion when new VF MAC types get added. It helps with cleaning up VF driver flow. Change-ID: Ibe1eeb71262a3a40f24a1c5409436bdc3411da7f Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com> Acked-by: Shannon Nelson <shannon.nelson@intel.com> Acked-by: Greg Rose <gregory.v.rose@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-12-06i40e: remove useless debug noiseShannon Nelson1-3/+0
This message really doesn't give any useful information and ends up getting printed every service_task loop in the Linux driver, filling the logfile with noise when AQ tracing is enabled. This patch simply removes the noise. Change-ID: I30ad51e6b03c7ad12a7d9c102def0087db622df3 Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Acked-by: Mitch Williams <mitch.a.williams@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-11-21i40e: don't overload fieldsMitch Williams1-3/+3
Overloading the msg_size field in the arq_event_info struct is just a bad idea. It leads to repeated bugs when the structure is used in a loop, since the input value (buffer size) is overwritten by the output value (actual message length). Fix this by splitting the field into two and renaming to indicate the actual function of each field. Since the arq_event struct has now changed, we need to change the drivers to support this. Note that we no longer need to initialize the buffer size each time we go through a loop as this value is no longer destroyed by arq processing. In the process, we also fix a bug in i40evf_verify_api_ver where the buffer size was not correctly reinitialized each time through the loop. Change-ID: Ic7f9633cdd6f871f93e698dfb095e29c696f5581 Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Acked-by: Shannon Nelson <shannon.nelson@intel.com> Acked-by: Ashish Shah <ashish.n.shah@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-11-11i40e: poll firmware slowerKamil Krawczyk1-4/+2
The code was polling the firmware tail register for completion every 10 microseconds, which is way faster than the firmware can respond. This changes the poll interval to 1ms, which reduces polling CPU utilization, and the number of times we loop. The maximum delay is still 100ms. Change-ID: I4bbfa6b66d802890baf8b4154061e55942b90958 Signed-off-by: Kamil Krawczyk <kamil.krawczyk@intel.com> Acked-by: Shannon Nelson <shannon.nelson@intel.com> Tested-by: Jim Young <jamesx.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-08-27i40e/i40evf: add max buf len to aq debug print helperShannon Nelson1-3/+5
There is at least one case in the Firmware API where the response to a command changes the buffer size field in the AQ descriptor to a larger number than what the request's buffer size started as. This is in addition to setting an error flag and is in order to tell the requester how much larger a buffer is required for the answer. We need to be sure not to use that number when dumping the contents of the data buffer because it can send us into the weeds and generate an invalid pointer exception. This patch adds a max buffer size parameter to the print helper to be sure the code knows when to stop. Change-ID: Ib84f7ed72140fe9d600086d8f2002fc5d8753092 Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Tested-by: Jim Young <jamesx.m.young@intel.com> Tested-by: Sibai Li <sibai.li@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-07-24i40e: always print aqtx answerShannon Nelson1-5/+3
Sometimes the AQTX answer comes back with no data, but we still want to print the descriptor that got written back. Change-ID: I5f734d99b4c95510987413893f0a34626571d474 Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Tested-by: Jim Young <jamesx.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-07-24i40e/i40evf: ARQ copy desc data even for failed commandsKamil Krawczyk1-7/+7
Copy desc and buffer data even for ARQ events which return error status. Previously, a check for NVM related AQ commands which is done later in this function would not recognize that such a command was received and would not clear nvm_busy flag. This would block access to NVM until a driver reset. This will fix that. Change-ID: If69ad74e165b56081c0686b97402511d2e2880c0 Signed-off-by: Kamil Krawczyk <kamil.krawczyk@intel.com> Tested-by: Jim Young <jamesx.m.young@intel.com> Tested-by: Sibai Li <sibai.li@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-07-24i40e/i40evf: Add nvmupdate supportShannon Nelson1-8/+13
This implements a state machine intended to support the userland tool for updating the device eeprom. The state machine implements one-shot reads, writes, multi-step write sessions, and checksum requests. If we're in the middle of a multi-step write session, no one should fire off other writes, however, one shot reads are valid. The userland tool is expected to keep track of its session status, arrange the placement and ordering of the writes, and deal with the checksum requirement. This patch also adds nvmupdate support to ethtool callbacks. The get_eeprom() and set_eeprom() services in ethtool are used here to facilitate the userland NVMUpdate tool. The 'magic' value in the get and set commands is used to pass additional control information for managing the read and write steps. The read operation works both as normally expected in the standard ethtool method, as well as with the extra NVM controls. The write operation works only for the expanded NVM functions - the normal ethtool method is not allowed because of the NVM semaphore management needed for multipart writes, as well as the checksum requirement. Change-ID: I1d84a170153a9f437906744e2e350fd68fe7563d Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Tested-by: Jim Young <jamesx.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-07-17i40e/i40evf: Clean up codePaul M Stillwell Jr1-1/+1
1. Remove some break statements that will never get touched. 2. Remove an extra space. 3. Remove a comment for a parameter that doesn't exist 4. Move the assignment of a variable up to get rid of an else case. Change-ID: I308a4b5ec070b1f0601f13b041ba4375aaad4b06 Signed-off-by: Paul M Stillwell Jr <paul.m.stillwell.jr@intel.com> Tested-by: Jim Young <jamesx.m.young@intel.com> Tested-by: Sibai Li <sibai.li@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2014-07-01i40e/i40evf: add ASQ write back timeout variable to AQ structureKamil Krawczyk1-1/+4
Add new variable defining ASQ command write back timeout to allow for dynamic modification of this timeout. Initialize it on AQ initialize routine with default value, vary it on device ID. Change-ID: I5c9908f9d7c5455634353b694a986d6f146d1b9d Signed-off-by: Kamil Krawczyk <kamil.krawczyk@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-04 21:06:57 +0300