summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/hisilicon/hns3/hns3_ethtool.c
AgeCommit message (Collapse)AuthorFilesLines
2023-09-07net: hns3: fix the port information display when sfp is absentYisen Zhuang1-1/+3
When sfp is absent or unidentified, the port type should be displayed as PORT_OTHERS, rather than PORT_FIBRE. Fixes: 88d10bd6f730 ("net: hns3: add support for multiple media type") Signed-off-by: Yisen Zhuang <yisen.zhuang@huawei.com> Signed-off-by: Jijie Shao <shaojijie@huawei.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-07-19net: hns3: remove unnecessary (void*) conversions.Wu Yunchuan1-1/+1
No need cast (void*) to (struct hns3_nic_priv *). Signed-off-by: Wu Yunchuan <yunchuan@nfschina.com> Reviewed-by: Hao Lan <lanhao@huawei.com> Link: https://lore.kernel.org/r/20230717031128.54557-1-yunchuan@nfschina.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-06-23net: hns3: clear hns unused parameter alarmPeiyang Wang1-4/+3
Several functions in the hns3 driver have unused parameters. The compiler will warn about them when building with -Wunused-parameter option of hns3. Signed-off-by: Peiyang Wang <wangpeiyang1@huawei.com> Signed-off-by: Hao Lan <lanhao@huawei.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-03-29net: hns3: support wake on lan configuration and queryHao Lan1-0/+27
The HNS3 driver supports Wake-on-LAN, which can wake up the server from power off state to power on state by magic packet or magic security packet. ChangeLog: v1->v2: Deleted the debugfs function that overlaps with the ethtool function from suggestion of Andrew Lunn. v2->v3: Return the wol configuration stored in driver, suggested by Alexander H Duyck. v3->v4: Add a helper to go from netdev to the local struct, suggested by Simon Horman and Jakub Kicinski. Reviewed-by: Simon Horman <simon.horman@corigine.com> Signed-off-by: Hao Lan <lanhao@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-12-13net: hns3: use strscpy() to instead of strncpy()Xu Panda1-4/+2
The implementation of strscpy() is more robust and safer. That's now the recommended way to copy NUL terminated strings. Signed-off-by: Xu Panda <xu.panda@zte.com.cn> Signed-off-by: Yang Yang <yang.yang29@zte.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Link: https://lore.kernel.org/r/202212091538591375035@zte.com.cn Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-22net: hns3: add support for external loopback testYonglong Liu1-17/+44
This patch add support for external loopback test. The successful test need the link is up with duplex full. The driver do external loopback first, and then the whole offline test. Signed-off-by: Yonglong Liu <liuyonglong@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-07net: hns3: add support to query and set lane number by ethtoolHao Chen1-6/+13
When serdes lane support setting 25Gb/s or 50Gb/s speed and user wants to set port speed as 50Gb/s, it can be setted as one 50Gb/s serdes lane or two 25Gb/s serdes lanes. So, this patch adds support to query and set lane number by ethtool to satisfy this scenario. Signed-off-by: Hao Chen <chenhao418@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-07net: hns3: add querying fec statisticsHao Lan1-0/+14
FEC statistics can be used to check the transmission quality of links. This patch implements the get_fec_stats callback of ethtool_ops to support querying FEC statistics by command "ethtool -I --show-fec eth0". Signed-off-by: Hao Lan <lanhao@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-08-31net: hns3: net: hns3: add querying and setting fec off mode from firmwareGuangbin Huang1-6/+5
For some new devices, the FEC mode can not be set to OFF in speed 200G. In order to flexibly adapt to all types of devices, driver queries fec ability from firmware to decide whether OFF mode can be supported. Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-08-31net: hns3: add querying and setting fec llrs mode from firmwareHao Lan1-0/+4
This patch supports llrs fec mode in speed 200G for some new devices, and suppoprts querying llrs fec ability from firmware. Signed-off-by: Hao Lan <lanhao@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-06-13net: hns3: modify the ring param print infoJie Wang1-1/+1
Currently tx push is also a ring param. So the original ring param print info in hns3_is_ringparam_changed should be adjusted. Fixes: 07fdc163ac88 ("net: hns3: refactor hns3_set_ringparam()") Signed-off-by: Jie Wang <wangjie125@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-09net: hns3: fix access null pointer issue when set tx-buf-size as 0Hao Chen1-2/+5
When set tx-buf-size as 0 by ethtool, hns3_init_tx_spare_buffer() will return directly and priv->ring->tx_spare->len is uninitialized, then print function access priv->ring->tx_spare->len will cause this issue. When set tx-buf-size as 0 by ethtool, the print function will print 0 directly and not access priv->ring->tx_spare->len. Fixes: 2373b35c24ff ("net: hns3: add log for setting tx spare buf size") Signed-off-by: Hao Chen <chenhao288@hisilicon.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-23net: hns3: Fix spelling mistake "actvie" -> "active"Colin Ian King1-1/+1
There is a spelling mistake in a netdev_info message. Fix it. Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Link: https://lore.kernel.org/r/20220421085546.321792-1-colin.i.king@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-04-20net: hns3: remove unnecessary line wrap for hns3_set_tunableHao Chen1-6/+3
Remove unnecessary line wrap for hns3_set_tunable to improve function readability. Signed-off-by: Hao Chen <chenhao288@hisilicon.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-20net: hns3: add log for setting tx spare buf sizeHao Chen1-0/+6
For the active tx spare buffer size maybe changed according to the page size, so add log to notice it. Signed-off-by: Hao Chen <chenhao288@hisilicon.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-20net: hns3: refactor hns3_set_ringparam()Hao Chen1-22/+43
Use struct hns3_ring_param to replace variable new/old_xxx and add hns3_is_ringparam_changed() to judge them if is changed to improve code readability. Signed-off-by: Hao Chen <chenhao288@hisilicon.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-20net: hns3: add ethtool parameter check for CQE/EQE modeYufeng Mo1-3/+25
For DEVICE_VERSION_V2, the hardware does not support the CQE mode. So add capability bit for coalesce CQE mode and add parameter check for it in ethtool. Signed-off-by: Yufeng Mo <moyufeng@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-15net: hns3: add tx push support in hns3 ring param processJie Wang1-1/+32
This patch adds tx push param to hns3 ring param and adapts the set and get API of ring params. So users can set it by cmd ethtool -G and get it by cmd ethtool -g. Signed-off-by: Jie Wang <wangjie125@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-26net: hns3: add NULL pointer check for hns3_set/get_ringparam()Hao Chen1-3/+9
When pci devices init failed and haven't reinit, priv->ring is NULL and hns3_set/get_ringparam() will access priv->ring. it causes call trace. So, add NULL pointer check for hns3_set/get_ringparam() to avoid this situation. Fixes: 5668abda0931 ("net: hns3: add support for set_ringparam") Signed-off-by: Hao Chen <chenhao288@hisilicon.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-26net: hns3: add netdev reset check for hns3_set_tunable()Hao Chen1-3/+5
When pci device reset failed, it does uninit operation and priv->ring is NULL, it causes accessing NULL pointer error. Add netdev reset check for hns3_set_tunable() to fix it. Fixes: 99f6b5fb5f63 ("net: hns3: use bounce buffer when rx page can not be reused") Signed-off-by: Hao Chen <chenhao288@hisilicon.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-26net: hns3: fix ethtool tx copybreak buf size indicating not aligned issueHao Chen1-1/+2
When use ethtoool set tx copybreak buf size to a large value which causes order exceeding 10 or memory is not enough, it causes allocating tx copybreak buffer failed and print "the active tx spare buf is 0, not enabled tx spare buffer", however, use --get-tunable parameter query tx copybreak buf size and it indicates setting value not 0. So, it's necessary to change the print value from setting value to 0. Set kinfo.tx_spare_buf_size to 0 when set tx copybreak buf size failed. Fixes: e445f08af2b1 ("net: hns3: add support to set/get tx copybreak buf size via ethtool for hns3 driver") Signed-off-by: Hao Chen <chenhao288@hisilicon.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-07net: hns3: add support for TX push modeYufeng Mo1-0/+2
For the device that supports the TX push capability, the BD can be directly copied to the device memory. However, due to hardware restrictions, the push mode can be used only when there are no more than two BDs, otherwise, the doorbell mode based on device memory is used. Signed-off-by: Yufeng Mo <moyufeng@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-27Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-0/+4
drivers/net/ipa/ipa_main.c 8afc7e471ad3 ("net: ipa: separate disabling setup from modem stop") 76b5fbcd6b47 ("net: ipa: kill ipa_modem_init()") Duplicated include, drop one. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-11-26net: hns3: fix incorrect components info of ethtool --reset commandJie Wang1-0/+4
Currently, HNS3 driver doesn't clear the reset flags of components after successfully executing reset, it causes userspace info of "Components reset" and "Components not reset" is incorrect. So fix this problem by clear corresponding reset flag after reset process. Fixes: ddccc5e368a3 ("net: hns3: add support for triggering reset by ethtool") Signed-off-by: Jie Wang <wangjie125@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-11-22net: hns3: add support to set/get rx buf len via ethtool for hns3 driverHao Chen1-8/+44
Rx buf len is for rx BD buffer size, support setting it via ethtool -G parameter and getting it via ethtool -g parameter. Signed-off-by: Hao Chen <chenhao288@hisilicon.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-22ethtool: extend ringparam setting/getting API with rx_buf_lenHao Chen1-2/+6
Add two new parameters kernel_ringparam and extack for .get_ringparam and .set_ringparam to extend more ring params through netlink. Signed-off-by: Hao Chen <chenhao288@hisilicon.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-22net: hns3: add support to set/get tx copybreak buf size via ethtool for hns3 ↵Hao Chen1-0/+56
driver Tx copybreak buf size is used for tx copybreak feature, the feature is used for small size packet or frag. It adds a queue based tx shared bounce buffer to memcpy the small packet when the len of xmitted skb is below tx_copybreak(value to distinguish small size and normal size), and reduce the overhead of dma map and unmap when IOMMU is on. Support setting it via ethtool --set-tunable parameter and getting it via ethtool --get-tunable parameter. Signed-off-by: Hao Chen <chenhao288@hisilicon.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-11Merge tag 'net-5.16-rc1' of ↵Linus Torvalds1-2/+4
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Including fixes from bpf, can and netfilter. Current release - regressions: - bpf: do not reject when the stack read size is different from the tracked scalar size - net: fix premature exit from NAPI state polling in napi_disable() - riscv, bpf: fix RV32 broken build, and silence RV64 warning Current release - new code bugs: - net: fix possible NULL deref in sock_reserve_memory - amt: fix error return code in amt_init(); fix stopping the workqueue - ax88796c: use the correct ioctl callback Previous releases - always broken: - bpf: stop caching subprog index in the bpf_pseudo_func insn - security: fixups for the security hooks in sctp - nfc: add necessary privilege flags in netlink layer, limit operations to admin only - vsock: prevent unnecessary refcnt inc for non-blocking connect - net/smc: fix sk_refcnt underflow on link down and fallback - nfnetlink_queue: fix OOB when mac header was cleared - can: j1939: ignore invalid messages per standard - bpf, sockmap: - fix race in ingress receive verdict with redirect to self - fix incorrect sk_skb data_end access when src_reg = dst_reg - strparser, and tls are reusing qdisc_skb_cb and colliding - ethtool: fix ethtool msg len calculation for pause stats - vlan: fix a UAF in vlan_dev_real_dev() when ref-holder tries to access an unregistering real_dev - udp6: make encap_rcv() bump the v6 not v4 stats - drv: prestera: add explicit padding to fix m68k build - drv: felix: fix broken VLAN-tagged PTP under VLAN-aware bridge - drv: mvpp2: fix wrong SerDes reconfiguration order Misc & small latecomers: - ipvs: auto-load ipvs on genl access - mctp: sanity check the struct sockaddr_mctp padding fields - libfs: support RENAME_EXCHANGE in simple_rename() - avoid double accounting for pure zerocopy skbs" * tag 'net-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (123 commits) selftests/net: udpgso_bench_rx: fix port argument net: wwan: iosm: fix compilation warning cxgb4: fix eeprom len when diagnostics not implemented net: fix premature exit from NAPI state polling in napi_disable() net/smc: fix sk_refcnt underflow on linkdown and fallback net/mlx5: Lag, fix a potential Oops with mlx5_lag_create_definer() gve: fix unmatched u64_stats_update_end() net: ethernet: lantiq_etop: Fix compilation error selftests: forwarding: Fix packet matching in mirroring selftests vsock: prevent unnecessary refcnt inc for nonblocking connect net: marvell: mvpp2: Fix wrong SerDes reconfiguration order net: ethernet: ti: cpsw_ale: Fix access to un-initialized memory net: stmmac: allow a tc-taprio base-time of zero selftests: net: test_vxlan_under_vrf: fix HV connectivity test net: hns3: allow configure ETS bandwidth of all TCs net: hns3: remove check VF uc mac exist when set by PF net: hns3: fix some mac statistics is always 0 in device version V2 net: hns3: fix kernel crash when unload VF while it is being reset net: hns3: sync rx ring head in echo common pull net: hns3: fix pfc packet number incorrect after querying pfc parameters ...
2021-11-07net: hisilicon: fix hsn3_ethtool kernel-doc warningsRandy Dunlap1-2/+4
Fix kernel-doc warnings and spacing in hns3_ethtool.c: hns3_ethtool.c:246: warning: No description found for return value of 'hns3_lp_run_test' hns3_ethtool.c:408: warning: expecting prototype for hns3_nic_self_test(). Prototype was for hns3_self_test() instead Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reported-by: kernel test robot <lkp@intel.com> Cc: Peng Li <lipeng321@huawei.com> Cc: Guangbin Huang <huangguangbin2@huawei.com> Cc: Yisen Zhuang <yisen.zhuang@huawei.com> Cc: Salil Mehta <salil.mehta@huawei.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-07Merge tag 'pci-v5.16-changes' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull pci updates from Bjorn Helgaas: "Enumeration: - Conserve IRQs by setting up portdrv IRQs only when there are users (Jan Kiszka) - Rework and simplify _OSC negotiation for control of PCIe features (Joerg Roedel) - Remove struct pci_dev.driver pointer since it's redundant with the struct device.driver pointer (Uwe Kleine-König) Resource management: - Coalesce contiguous host bridge apertures from _CRS to accommodate BARs that cover more than one aperture (Kai-Heng Feng) Sysfs: - Check CAP_SYS_ADMIN before parsing user input (Krzysztof Wilczyński) - Return -EINVAL consistently from "store" functions (Krzysztof Wilczyński) - Use sysfs_emit() in endpoint "show" functions to avoid buffer overruns (Kunihiko Hayashi) PCIe native device hotplug: - Ignore Link Down/Up caused by resets during error recovery so endpoint drivers can remain bound to the device (Lukas Wunner) Virtualization: - Avoid bus resets on Atheros QCA6174, where they hang the device (Ingmar Klein) - Work around Pericom PI7C9X2G switch packet drop erratum by using store and forward mode instead of cut-through (Nathan Rossi) - Avoid trying to enable AtomicOps on VFs; the PF setting applies to all VFs (Selvin Xavier) MSI: - Document that /sys/bus/pci/devices/.../irq contains the legacy INTx interrupt or the IRQ of the first MSI (not MSI-X) vector (Barry Song) VPD: - Add pci_read_vpd_any() and pci_write_vpd_any() to access anywhere in the possible VPD space; use these to simplify the cxgb3 driver (Heiner Kallweit) Peer-to-peer DMA: - Add (not subtract) the bus offset when calculating DMA address (Wang Lu) ASPM: - Re-enable LTR at Downstream Ports so they don't report Unsupported Requests when reset or hot-added devices send LTR messages (Mingchuang Qiao) Apple PCIe controller driver: - Add driver for Apple M1 PCIe controller (Alyssa Rosenzweig, Marc Zyngier) Cadence PCIe controller driver: - Return success when probe succeeds instead of falling into error path (Li Chen) HiSilicon Kirin PCIe controller driver: - Reorganize PHY logic and add support for external PHY drivers (Mauro Carvalho Chehab) - Support PERST# GPIOs for HiKey970 external PEX 8606 bridge (Mauro Carvalho Chehab) - Add Kirin 970 support (Mauro Carvalho Chehab) - Make driver removable (Mauro Carvalho Chehab) Intel VMD host bridge driver: - If IOMMU supports interrupt remapping, leave VMD MSI-X remapping enabled (Adrian Huang) - Number each controller so we can tell them apart in /proc/interrupts (Chunguang Xu) - Avoid building on UML because VMD depends on x86 bare metal APIs (Johannes Berg) Marvell Aardvark PCIe controller driver: - Define macros for PCI_EXP_DEVCTL_PAYLOAD_* (Pali Rohár) - Set Max Payload Size to 512 bytes per Marvell spec (Pali Rohár) - Downgrade PIO Response Status messages to debug level (Marek Behún) - Preserve CRS SV (Config Request Retry Software Visibility) bit in emulated Root Control register (Pali Rohár) - Fix issue in configuring reference clock (Pali Rohár) - Don't clear status bits for masked interrupts (Pali Rohár) - Don't mask unused interrupts (Pali Rohár) - Avoid code repetition in advk_pcie_rd_conf() (Marek Behún) - Retry config accesses on CRS response (Pali Rohár) - Simplify emulated Root Capabilities initialization (Pali Rohár) - Fix several link training issues (Pali Rohár) - Fix link-up checking via LTSSM (Pali Rohár) - Fix reporting of Data Link Layer Link Active (Pali Rohár) - Fix emulation of W1C bits (Marek Behún) - Fix MSI domain .alloc() method to return zero on success (Marek Behún) - Read entire 16-bit MSI vector in MSI handler, not just low 8 bits (Marek Behún) - Clear Root Port I/O Space, Memory Space, and Bus Master Enable bits at startup; PCI core will set those as necessary (Pali Rohár) - When operating as a Root Port, set class code to "PCI Bridge" instead of the default "Mass Storage Controller" (Pali Rohár) - Add emulation for PCI_BRIDGE_CTL_BUS_RESET since aardvark doesn't implement this per spec (Pali Rohár) - Add emulation of option ROM BAR since aardvark doesn't implement this per spec (Pali Rohár) MediaTek MT7621 PCIe controller driver: - Add MediaTek MT7621 PCIe host controller driver and DT binding (Sergio Paracuellos) Qualcomm PCIe controller driver: - Add SC8180x compatible string (Bjorn Andersson) - Add endpoint controller driver and DT binding (Manivannan Sadhasivam) - Restructure to use of_device_get_match_data() (Prasad Malisetty) - Add SC7280-specific pcie_1_pipe_clk_src handling (Prasad Malisetty) Renesas R-Car PCIe controller driver: - Remove unnecessary includes (Geert Uytterhoeven) Rockchip DesignWare PCIe controller driver: - Add DT binding (Simon Xue) Socionext UniPhier Pro5 controller driver: - Serialize INTx masking/unmasking (Kunihiko Hayashi) Synopsys DesignWare PCIe controller driver: - Run dwc .host_init() method before registering MSI interrupt handler so we can deal with pending interrupts left by bootloader (Bjorn Andersson) - Clean up Kconfig dependencies (Andy Shevchenko) - Export symbols to allow more modular drivers (Luca Ceresoli) TI DRA7xx PCIe controller driver: - Allow host and endpoint drivers to be modules (Luca Ceresoli) - Enable external clock if present (Luca Ceresoli) TI J721E PCIe driver: - Disable PHY when probe fails after initializing it (Christophe JAILLET) MicroSemi Switchtec management driver: - Return error to application when command execution fails because an out-of-band reset has cleared the device BARs, Memory Space Enable, etc (Kelvin Cao) - Fix MRPC error status handling issue (Kelvin Cao) - Mask out other bits when reading of management VEP instance ID (Kelvin Cao) - Return EOPNOTSUPP instead of ENOTSUPP from sysfs show functions (Kelvin Cao) - Add check of event support (Logan Gunthorpe) Miscellaneous: - Remove unused pci_pool wrappers, which have been replaced by dma_pool (Cai Huoqing) - Use 'unsigned int' instead of bare 'unsigned' (Krzysztof Wilczyński) - Use kstrtobool() directly, sans strtobool() wrapper (Krzysztof Wilczyński) - Fix some sscanf(), sprintf() format mismatches (Krzysztof Wilczyński) - Update PCI subsystem information in MAINTAINERS (Krzysztof Wilczyński) - Correct some misspellings (Krzysztof Wilczyński)" * tag 'pci-v5.16-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (137 commits) PCI: Add ACS quirk for Pericom PI7C9X2G switches PCI: apple: Configure RID to SID mapper on device addition iommu/dart: Exclude MSI doorbell from PCIe device IOVA range PCI: apple: Implement MSI support PCI: apple: Add INTx and per-port interrupt support PCI: kirin: Allow removing the driver PCI: kirin: De-init the dwc driver PCI: kirin: Disable clkreq during poweroff sequence PCI: kirin: Move the power-off code to a common routine PCI: kirin: Add power_off support for Kirin 960 PHY PCI: kirin: Allow building it as a module PCI: kirin: Add MODULE_* macros PCI: kirin: Add Kirin 970 compatible PCI: kirin: Support PERST# GPIOs for HiKey970 external PEX 8606 bridge PCI: apple: Set up reference clocks when probing PCI: apple: Add initial hardware bring-up PCI: of: Allow matching of an interrupt-map local to a PCI device of/irq: Allow matching of an interrupt-map local to an interrupt controller irqdomain: Make of_phandle_args_to_fwspec() generally available PCI: Do not enable AtomicOps on VFs ...
2021-10-13net: hns3: use dev_driver_string() instead of pci_dev->driver->nameUwe Kleine-König1-1/+1
Replace dev->driver_name() by dev_driver_string() for the corresponding struct device. This is a step toward removing pci_dev->driver. [bhelgaas: split to separate patch] Link: https://lore.kernel.org/r/20211004125935.2300113-8-u.kleine-koenig@pengutronix.de Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2021-09-29net: hns3: fix always enable rx vlan filter problem after selftestGuangbin Huang1-2/+4
Currently, the rx vlan filter will always be disabled before selftest and be enabled after selftest as the rx vlan filter feature is fixed on in old device earlier than V3. However, this feature is not fixed in some new devices and it can be disabled by user. In this case, it is wrong if rx vlan filter is enabled after selftest. So fix it. Fixes: bcc26e8dc432 ("net: hns3: remove unused code in hns3_self_test()") Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-30net: hns3: reconstruct function hns3_self_testPeng Li1-37/+64
This patch reconstructs function hns3_self_test to reduce the code cycle complexity and make code more concise. Signed-off-by: Peng Li <lipeng321@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-24net: hns3: add ethtool support for CQE/EQE mode configurationYufeng Mo1-1/+17
Add support in ethtool for switching EQE/CQE mode. Signed-off-by: Yufeng Mo <moyufeng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-08-24ethtool: extend coalesce setting uAPI with CQE modeYufeng Mo1-2/+6
In order to support more coalesce parameters through netlink, add two new parameter kernel_coal and extack for .set_coalesce and .get_coalesce, then some extra info can return to user with the netlink API. Signed-off-by: Yufeng Mo <moyufeng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-08-17net: hns3: add support ethtool extended link stateGuangbin Huang1-0/+66
In order to know the reason of link up failure, add supporting ethtool extended link state. Driver reads the link status code from firmware if in link down state and converts it to ethtool extended link state. Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-08-17net: hns3: add header file hns3_ethtoo.hGuangbin Huang1-15/+1
Add a new file hns3_ethtool.h, and move struct type definitions from hns3_ethtool.c to hns3_ethtool.h. Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-08-12net: hns3: add support for triggering reset by ethtoolYufeng Mo1-0/+56
Currently, four reset types are supported for the HNS3 ethernet driver: IMP reset, global reset, function reset, and FLR. Only FLR can now be triggered by the user. To restore the device when an exception occurs, add support for triggering reset by ethtool. Run the "ethtool --reset DEVNAME mgmt | all | dedicated" to trigger the IMP | global | function reset manually. In addition, VF can only trigger function reset. Signed-off-by: Yufeng Mo <moyufeng@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Link: https://lore.kernel.org/r/1628602128-15640-1-git-send-email-huangguangbin2@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-06-16net: hns3: use bounce buffer when rx page can not be reusedYunsheng Lin1-0/+12
Currently rx page will be reused to receive future packet when the stack releases the previous skb quickly. If the old page can not be reused, a new page will be allocated and mapped, which comsumes a lot of cpu when IOMMU is in the strict mode, especially when the application and irq/NAPI happens to run on the same cpu. So allocate a new frag to memcpy the data to avoid the costly IOMMU unmapping/mapping operation, and add "frag_alloc_err" and "frag_alloc" stats in "ethtool -S ethX" cmd. The throughput improves above 50% when running single thread of iperf using TCP when IOMMU is in strict mode and iperf shares the same cpu with irq/NAPI(rx_copybreak = 2048 and mtu = 1500). Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-16net: hns3: support dma_map_sg() for multi frags skbYunsheng Lin1-0/+3
Using the queue based tx buffer, it is also possible to allocate a sgl buffer, and use skb_to_sgvec() to convert the skb to the sgvec in order to support the dma_map_sg() to decreases the overhead of IOMMU mapping and unmapping. Firstly, it reduces the number of buffers. For example, a tcp skb may have a 66-byte header and 3 fragments of 4328, 32768, and 28064 bytes. With this patch, dma_map_sg() will combine them into two buffers, 66-bytes header and one 65160-bytes fragment by using IOMMU. Secondly, it reduces the number of dma mapping and unmapping. All the original 4 buffers are mapped only once rather than 4 times. The throughput improves above 10% when running single thread of iperf using TCP when IOMMU is in strict mode. Suggested-by: Barry Song <song.bao.hua@hisilicon.com> Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-16net: hns3: use tx bounce buffer for small packetsYunsheng Lin1-0/+51
when the packet or frag size is small, it causes both security and performance issue. As dma can't map sub-page, this means some extra kernel data is visible to devices. On the other hand, the overhead of dma map and unmap is huge when IOMMU is on. So add a queue based tx shared bounce buffer to memcpy the small packet when the len of the xmitted skb is below tx_copybreak. Add tx_spare_buf_size module param to set the size of tx spare buffer, and add set/get_tunable to set or query the tx_copybreak. The throughtput improves from 30 Gbps to 90+ Gbps when running 16 netperf threads with 32KB UDP message size when IOMMU is in the strict mode(tx_copybreak = 2000 and mtu = 1500). Suggested-by: Barry Song <song.bao.hua@hisilicon.com> Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-11net: hns3: add support for PTPHuazhong Tan1-0/+12
Adds PTP support for HNS3 ethernet driver. Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: Yufeng Mo <moyufeng@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-01net: hns3: add support for modify VLAN filter stateJian Shen1-6/+2
Previously, with hardware limitation, the port VLAN filter are effective for both PF and its VFs simultaneously, so a single function is not able to enable/disable separately, and the VLAN filter state is default enabled. Now some device supports each function to bypass port VLAN filter, then each function can switch VLAN filter separately. Add capability flag to check whether the device supports modify VLAN filter state. If flag on, user will be able to modify the VLAN filter state by ethtool -K. Furtherly, the default VLAN filter state is also changed according to whether non-zero VLAN used. Then the device can receive packet with any VLAN tag if only VLAN 0 used. The function hclge_need_enable_vport_vlan_filter() is used to help implement above changes. And the VLAN filter handle for promisc mode can also be simplified by this function. Signed-off-by: Jian Shen <shenjian15@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-05-18net: hns3: fix user's coalesce configuration lost issueHuazhong Tan1-41/+23
Currently, when adaptive is on, the user's coalesce configuration may be overwritten by the dynamic one. The reason is that user's configurations are saved in struct hns3_enet_tqp_vector whose value maybe changed by the dynamic algorithm. To fix it, use struct hns3_nic_priv instead of struct hns3_enet_tqp_vector to save and get the user's configuration. BTW, operations of storing and restoring coalesce info in the reset process are unnecessary now, so remove them as well. Fixes: 434776a5fae2 ("net: hns3: add ethtool_ops.set_coalesce support to PF") Fixes: 7e96adc46633 ("net: hns3: add ethtool_ops.get_coalesce support to PF") Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-29net: hns3: add handling for xmit skb with recursive fraglistYunsheng Lin1-0/+2
Currently hns3 driver only handle the xmit skb with one level of fraglist skb, add handling for multi level by calling hns3_tx_bd_num() recursively when calculating bd num and calling hns3_fill_skb_to_desc() recursively when filling tx desc. When the skb has a fraglist level of 24, the skb is simply dropped and stats.max_recursion_level is added to record the error. Move the stat handling from hns3_nic_net_xmit() to hns3_nic_maybe_stop_tx() in order to handle different error stat and add the 'max_recursion_level' and 'hw_limitation' stat. Note that the max recursive level as 24 is chose according to below: commit 48a1df65334b ("skbuff: return -EMSGSIZE in skb_to_sgvec to prevent overflow"). And that we are not able to find a testcase to verify the recursive fraglist case, so Fixes tag is not provided. Reported-by: Barry Song <song.bao.hua@hisilicon.com> Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-27net: hns3: fix prototype warningHuazhong Tan1-1/+1
Correct a report warning in hns3_ethtool.c Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-14net: hns3: add support for imp-controlled PHYsGuangbin Huang1-1/+8
IMP(Intelligent Management Processor) firmware add a new feature to take control of PHYs for some new devices, PF driver adds support for this feature. Driver queries device's capability to check whether IMP supports this feature, it will tell IMP to enable this feature by firmware compatible command if it is supported. Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-12net: hns3: use pause capability queried from firmwareYufeng Mo1-0/+8
For maintainability and compatibility, add support to use pause capability queried from firmware, and add debugfs support to dump this capability. Signed-off-by: Yufeng Mo <moyufeng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-10net: hns3: modify some unmacthed types print parameterJiaran Zhang1-1/+1
Fix an issue where the formatting symbol of the formatting input and output function does not match the actual type. Signed-off-by: Jiaran Zhang <zhangjiaran@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-07net: hns3: RSS indirection table use device specificationGuangbin Huang1-4/+2
As RSS indirection table size may be different in different hardware. Instead of using macro, this value is better to use device specification which querying from firmware. BTW, RSS indirection table should be allocated by the queried size instead the static array. .get_rss_indir_size in struct hnae3_ae_ops is not used now, so remove it as well. Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-27 19:42:57 +0300