summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/chelsio
AgeCommit message (Collapse)AuthorFilesLines
2020-03-20cxgb4: fix throughput drop during Tx backpressureRahul Lakkireddy1-40/+2
commit 7c3bebc3d868 ("cxgb4: request the TX CIDX updates to status page") reverted back to getting Tx CIDX updates via DMA, instead of interrupts, introduced by commit d429005fdf2c ("cxgb4/cxgb4vf: Add support for SGE doorbell queue timer") However, it missed reverting back several code changes where Tx CIDX updates are not explicitly requested during backpressure when using interrupt mode. These missed changes cause slow recovery during backpressure because the corresponding interrupt no longer comes and hence results in Tx throughput drop. So, revert back these missed code changes, as well, which will allow explicitly requesting Tx CIDX updates when backpressure happens. This enables the corresponding interrupt with Tx CIDX update message to get generated and hence speed up recovery and restore back throughput. Fixes: 7c3bebc3d868 ("cxgb4: request the TX CIDX updates to status page") Fixes: d429005fdf2c ("cxgb4/cxgb4vf: Add support for SGE doorbell queue timer") Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-19cxgb4: rework TC filter rule insertion across regionsRahul Lakkireddy6-152/+381
Chelsio NICs have 3 filter regions, in following order of priority: 1. High Priority (HPFILTER) region (Highest Priority). 2. HASH region. 3. Normal FILTER region (Lowest Priority). Currently, there's a 1-to-1 mapping between the prio value passed by TC and the filter region index. However, it's possible to have multiple TC rules with the same prio value. In this case, if a region is exhausted, no attempt is made to try inserting the rule in the next available region. So, rework and remove the 1-to-1 mapping. Instead, dynamically select the region to insert the filter rule, as long as the new rule's prio value doesn't conflict with existing rules across all the 3 regions. Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-18net: rename flow_action_hw_stats_types* -> flow_action_hw_stats*Jakub Kicinski1-1/+1
flow_action_hw_stats_types_check() helper takes one of the FLOW_ACTION_HW_STATS_*_BIT values as input. If we align the arguments to the opening bracket of the helper there is no way to call this helper and stay under 80 characters. Remove the "types" part from the new flow_action helpers and enum values. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-15cxgb4: fix delete filter entry fail in unload pathShahjada Abul Husain1-2/+2
Currently, the hardware TID index is assumed to start from index 0. However, with the following changeset, commit c21939998802 ("cxgb4: add support for high priority filters") hardware TID index can start after the high priority region, which has introduced a regression resulting in remove filters entry failure for cxgb4 unload path. This patch fix that. Fixes: c21939998802 ("cxgb4: add support for high priority filters") Signed-off-by: Shahjada Abul Husain <shahjada@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-15cxgb4: update T5/T6 adapter register rangesShahjada Abul Husain1-14/+8
Add more T5/T6 registers to be collected in register dump: 1. MPS register range 0x9810 to 0x9864 and 0xd000 to 0xd004. 2. NCSI register range 0x1a114 to 0x1a130 and 0x1a138 to 0x1a1c4. Signed-off-by: Shahjada Abul Husain <shahjada@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-13Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller1-22/+27
Minor overlapping changes, nothing serious. Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-11net: cxgb4vf: reject unsupported coalescing paramsJakub Kicinski1-0/+2
Set ethtool_ops->supported_coalesce_params to let the core reject unsupported coalescing parameters. This driver did not previously reject unsupported parameters. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-11net: cxgb4: reject unsupported coalescing paramsJakub Kicinski1-0/+4
Set ethtool_ops->supported_coalesce_params to let the core reject unsupported coalescing parameters. This driver did not previously reject unsupported parameters. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-11net: cxgb3: reject unsupported coalescing paramsJakub Kicinski1-0/+1
Set ethtool_ops->supported_coalesce_params to let the core reject unsupported coalescing parameters. This driver did not previously reject unsupported parameters. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-11net: cxgb2: reject unsupported coalescing paramsJakub Kicinski1-0/+3
Set ethtool_ops->supported_coalesce_params to let the core reject unsupported coalescing parameters. This driver did not previously reject unsupported parameters. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-09cxgb4/chcr: Add ipv6 support and statisticsRohit Maheshwari2-0/+55
Adding ipv6 support and ktls related statistics. v1->v2: - added blank lines at 2 places. v3->v4: - Replaced atomic_t with atomic64_t - added few necessary stat counters. Signed-off-by: Rohit Maheshwari <rohitm@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-09cxgb4/chcr: complete record tx handlingRohit Maheshwari3-0/+45
Added tx handling in this patch. This includes handling of segments contain single complete record. v1->v2: - chcr_write_cpl_set_tcb_ulp is added in this patch. v3->v4: - mss calculation logic. - replaced kfree_skb with dev_kfree_skb_any. - corrected error message reported by kbuild test robot <lkp@intel.com> Signed-off-by: Rohit Maheshwari <rohitm@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-09cxgb4/chcr: Save tx keys and handle HW responseRohit Maheshwari4-5/+52
As part of this patch generated and saved crypto keys, handled HW response of act_open_req and set_tcb_req. Defined connection state update. v1->v2: - optimized tcb update using control queue. - state machine handling when earlier states received. v2->v3: - Added one empty line after function declaration. Signed-off-by: Rohit Maheshwari <rohitm@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-09cxgb4/chcr : Register to tls add and del callbackRohit Maheshwari4-0/+40
A new macro is defined to enable ktls tx offload support on Chelsio T6 adapter. And if this macro is enabled, cxgb4 will send mailbox to enable or disable ktls settings on HW. In chcr, enabled tx offload flag in netdev and registered tls_dev_add and tls_dev_del. v1->v2: - mark tcb state to close in tls_dev_del. - u_ctx is now picked from adapter structure. - clear atid in case of failure. - corrected ULP_CRYPTO_KTLS_INLINE value. v2->v3: - add empty line after variable declaration. - local variable declaration in reverse christmas tree ordering. Signed-off-by: Rohit Maheshwari <rohitm@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-09flow_offload: check for basic action hw stats typeJiri Pirko3-4/+10
Introduce flow_action_basic_hw_stats_types_check() helper and use it in drivers. That sanitizes the drivers which do not have support for action HW stats types. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-04cxgb4: fix checks for max queues to allocateVishal Kulkarni1-22/+27
Hardware can support more than 8 queues currently limited by netif_get_num_default_rss_queues(). So, rework and fix checks for max number of queues to allocate. The checks should be based on how many are actually supported by hardware, OR the number of online cpus; whichever is lower. Fixes: 5952dde72307 ("cxgb4: set maximal number of default RSS queues") Signed-off-by: Vishal Kulkarni <vishal@chelsio.com>" Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-04net/chelsio: Don't set N/A for not available FWLeon Romanovsky1-3/+1
There is no need to set N/A if FW is not available. Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-03-04net/chelsio: Delete drive and module versionsLeon Romanovsky9-35/+1
Clean the code related to various versions: driver and module. Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-25chelsio: Replace zero-length array with flexible-array memberGustavo A. R. Silva13-17/+17
The current codebase makes use of the zero-length array language extension to the C90 standard, but the preferred mechanism to declare variable-length types such as these ones is a flexible array member[1][2], introduced in C99: struct foo { int stuff; struct boo array[]; }; By making use of the mechanism above, we will get a compiler warning in case the flexible array does not occur last in the structure, which will help us prevent some kind of undefined behavior bugs from being inadvertently introduced[3] to the codebase from now on. Also, notice that, dynamic memory allocations won't be affected by this change: "Flexible array members have incomplete type, and so the sizeof operator may not be applied. As a quirk of the original implementation of zero-length arrays, sizeof evaluates to zero."[1] This issue was found with the help of Coccinelle. [1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html [2] https://github.com/KSPP/linux/issues/21 [3] commit 76497732932f ("cxgb3/l2t: Fix undefined behaviour") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-02-06cxgb4: Added tls stats prints.Devulapally Shiva Krishna1-0/+7
Added debugfs entry to show the tls stats. Signed-off-by: Devulapally Shiva Krishna <shiva@chelsio.com> Signed-off-by: Vinay Kumar Yadav <vinay.yadav@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-29Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-nextLinus Torvalds9-118/+282
Pull networking updates from David Miller: 1) Add WireGuard 2) Add HE and TWT support to ath11k driver, from John Crispin. 3) Add ESP in TCP encapsulation support, from Sabrina Dubroca. 4) Add variable window congestion control to TIPC, from Jon Maloy. 5) Add BCM84881 PHY driver, from Russell King. 6) Start adding netlink support for ethtool operations, from Michal Kubecek. 7) Add XDP drop and TX action support to ena driver, from Sameeh Jubran. 8) Add new ipv4 route notifications so that mlxsw driver does not have to handle identical routes itself. From Ido Schimmel. 9) Add BPF dynamic program extensions, from Alexei Starovoitov. 10) Support RX and TX timestamping in igc, from Vinicius Costa Gomes. 11) Add support for macsec HW offloading, from Antoine Tenart. 12) Add initial support for MPTCP protocol, from Christoph Paasch, Matthieu Baerts, Florian Westphal, Peter Krystad, and many others. 13) Add Octeontx2 PF support, from Sunil Goutham, Geetha sowjanya, Linu Cherian, and others. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1469 commits) net: phy: add default ARCH_BCM_IPROC for MDIO_BCM_IPROC udp: segment looped gso packets correctly netem: change mailing list qed: FW 8.42.2.0 debug features qed: rt init valid initialization changed qed: Debug feature: ilt and mdump qed: FW 8.42.2.0 Add fw overlay feature qed: FW 8.42.2.0 HSI changes qed: FW 8.42.2.0 iscsi/fcoe changes qed: Add abstraction for different hsi values per chip qed: FW 8.42.2.0 Additional ll2 type qed: Use dmae to write to widebus registers in fw_funcs qed: FW 8.42.2.0 Parser offsets modified qed: FW 8.42.2.0 Queue Manager changes qed: FW 8.42.2.0 Expose new registers and change windows qed: FW 8.42.2.0 Internal ram offsets modifications MAINTAINERS: Add entry for Marvell OcteonTX2 Physical Function driver Documentation: net: octeontx2: Add RVU HW and drivers overview octeontx2-pf: ethtool RSS config support octeontx2-pf: Add basic ethtool support ...
2020-01-28Merge tag 'ioremap-5.6' of git://git.infradead.org/users/hch/ioremapLinus Torvalds1-1/+1
Pull ioremap updates from Christoph Hellwig: "Remove the ioremap_nocache API (plus wrappers) that are always identical to ioremap" * tag 'ioremap-5.6' of git://git.infradead.org/users/hch/ioremap: remove ioremap_nocache and devm_ioremap_nocache MIPS: define ioremap_nocache to ioremap
2020-01-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller3-4/+4
Minor conflict in mlx5 because changes happened to code that has moved meanwhile. Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-25net: cxgb3_main: Add CAP_NET_ADMIN check to CHELSIO_GET_MEMMichael Ellerman1-0/+2
The cxgb3 driver for "Chelsio T3-based gigabit and 10Gb Ethernet adapters" implements a custom ioctl as SIOCCHIOCTL/SIOCDEVPRIVATE in cxgb_extension_ioctl(). One of the subcommands of the ioctl is CHELSIO_GET_MEM, which appears to read memory directly out of the adapter and return it to userspace. It's not entirely clear what the contents of the adapter memory contains, but the assumption is that it shouldn't be accessible to all users. So add a CAP_NET_ADMIN check to the CHELSIO_GET_MEM case. Put it after the is_offload() check, which matches two of the other subcommands in the same function which also check for is_offload() and CAP_NET_ADMIN. Found by Ilja by code inspection, not tested as I don't have the required hardware. Reported-by: Ilja Van Sprundel <ivansprundel@ioactive.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-24l2t_seq_next should increase position indexVasily Averin1-2/+1
if seq_file .next fuction does not change position index, read after some lseek can generate unexpected output. https://bugzilla.kernel.org/show_bug.cgi?id=206283 Signed-off-by: Vasily Averin <vvs@virtuozzo.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-24seq_tab_next() should increase position indexVasily Averin1-2/+1
if seq_file .next fuction does not change position index, read after some lseek can generate unexpected output. https://bugzilla.kernel.org/show_bug.cgi?id=206283 Signed-off-by: Vasily Averin <vvs@virtuozzo.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-20Merge ra.kernel.org:/pub/scm/linux/kernel/git/netdev/netDavid S. Miller5-4/+123
2020-01-19cxgb4: reject overlapped queues in TC-MQPRIO offloadRahul Lakkireddy1-1/+27
A queue can't belong to multiple traffic classes. So, reject any such configuration that results in overlapped queues for a traffic class. Fixes: b1396c2bd675 ("cxgb4: parse and configure TC-MQPRIO offload") Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-19cxgb4: fix Tx multi channel port rate limitRahul Lakkireddy4-3/+96
T6 can support 2 egress traffic management channels per port to double the total number of traffic classes that can be configured. In this configuration, if the class belongs to the other channel, then all the queues must be bound again explicitly to the new class, for the rate limit parameters on the other channel to take effect. So, always explicitly bind all queues to the port rate limit traffic class, regardless of the traffic management channel that it belongs to. Also, only bind queues to port rate limit traffic class, if all the queues don't already belong to an existing different traffic class. Fixes: 4ec4762d8ec6 ("cxgb4: add TC-MATCHALL classifier egress offload") Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-01-06remove ioremap_nocache and devm_ioremap_nocacheChristoph Hellwig1-1/+1
ioremap has provided non-cached semantics by default since the Linux 2.6 days, so remove the additional ioremap_nocache interface. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Arnd Bergmann <arnd@arndb.de>
2020-01-01Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller6-19/+30
Simple overlapping changes in bpf land wrt. bpf_helper_defs.h handling. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-31cxgb4/cxgb4vf: fix flow control display for auto negotiationRahul Lakkireddy6-19/+30
As per 802.3-2005, Section Two, Annex 28B, Table 28B-2 [1], when _only_ Rx pause is enabled, both symmetric and asymmetric pause towards local device must be enabled. Also, firmware returns the local device's flow control pause params as part of advertised capabilities and negotiated params as part of current link attributes. So, fix up ethtool's flow control pause params fetch logic to read from acaps, instead of linkattr. [1] https://standards.ieee.org/standard/802_3-2005.html Fixes: c3168cabe1af ("cxgb4/cxgbvf: Handle 32-bit fw port capabilities") Signed-off-by: Surendra Mobiya <surendra@chelsio.com> Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller2-4/+12
Mere overlapping changes in the conflicts here. Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-21cxgb4: fix refcount init for TC-MQPRIO offloadRahul Lakkireddy1-4/+8
Properly initialize refcount to 1 when hardware queue arrays for TC-MQPRIO offload have been freshly allocated. Otherwise, following warning is observed. Also fix up error path to only free hardware queue arrays when refcount reaches 0. [ 130.075342] ------------[ cut here ]------------ [ 130.075343] refcount_t: addition on 0; use-after-free. [ 130.075355] WARNING: CPU: 0 PID: 10870 at lib/refcount.c:25 refcount_warn_saturate+0xe1/0x100 [ 130.075356] Modules linked in: sch_mqprio iptable_nat ib_iser libiscsi scsi_transport_iscsi ib_ipoib rdma_ucm ib_umad iw_cxgb4 libcxgb ib_uverbs x86_pkg_temp_thermal cxgb4 igb [ 130.075361] CPU: 0 PID: 10870 Comm: tc Kdump: loaded Not tainted 5.5.0-rc1+ #11 [ 130.075362] Hardware name: Supermicro X9SRE/X9SRE-3F/X9SRi/X9SRi-3F/X9SRE/X9SRE-3F/X9SRi/X9SRi-3F, BIOS 3.2 01/16/2015 [ 130.075363] RIP: 0010:refcount_warn_saturate+0xe1/0x100 [ 130.075364] Code: e8 14 41 c1 ff 0f 0b c3 80 3d 44 f4 10 01 00 0f 85 63 ff ff ff 48 c7 c7 38 9f 83 8c 31 c0 c6 05 2e f4 10 01 01 e8 ef 40 c1 ff <0f> 0b c3 48 c7 c7 10 9f 83 8c 31 c0 c6 05 17 f4 10 01 01 e8 d7 40 [ 130.075365] RSP: 0018:ffffa48d00c0b768 EFLAGS: 00010286 [ 130.075366] RAX: 0000000000000000 RBX: 0000000000000008 RCX: 0000000000000001 [ 130.075366] RDX: 0000000000000001 RSI: 0000000000000096 RDI: ffff8a2e9fa187d0 [ 130.075367] RBP: ffff8a2e93890000 R08: 0000000000000398 R09: 000000000000003c [ 130.075367] R10: 00000000000142a0 R11: 0000000000000397 R12: ffffa48d00c0b848 [ 130.075368] R13: ffff8a2e94746498 R14: ffff8a2e966f7000 R15: 0000000000000031 [ 130.075368] FS: 00007f689015f840(0000) GS:ffff8a2e9fa00000(0000) knlGS:0000000000000000 [ 130.075369] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 130.075369] CR2: 00000000006762a0 CR3: 00000007cf164005 CR4: 00000000001606f0 [ 130.075370] Call Trace: [ 130.075377] cxgb4_setup_tc_mqprio+0xbee/0xc30 [cxgb4] [ 130.075382] ? cxgb4_ethofld_restart+0x50/0x50 [cxgb4] [ 130.075384] ? pfifo_fast_init+0x7e/0xf0 [ 130.075386] mqprio_init+0x5f4/0x630 [sch_mqprio] [ 130.075389] qdisc_create+0x1bf/0x4a0 [ 130.075390] tc_modify_qdisc+0x1ff/0x770 [ 130.075392] rtnetlink_rcv_msg+0x28b/0x350 [ 130.075394] ? rtnl_calcit.isra.32+0x110/0x110 [ 130.075395] netlink_rcv_skb+0xc6/0x100 [ 130.075396] netlink_unicast+0x1db/0x330 [ 130.075397] netlink_sendmsg+0x2f5/0x460 [ 130.075399] ? _copy_from_user+0x2e/0x60 [ 130.075400] sock_sendmsg+0x59/0x70 [ 130.075401] ____sys_sendmsg+0x1f0/0x230 [ 130.075402] ? copy_msghdr_from_user+0xd7/0x140 [ 130.075403] ___sys_sendmsg+0x77/0xb0 [ 130.075404] ? ___sys_recvmsg+0x84/0xb0 [ 130.075406] ? __handle_mm_fault+0x377/0xaf0 [ 130.075407] __sys_sendmsg+0x53/0xa0 [ 130.075409] do_syscall_64+0x44/0x130 [ 130.075412] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 130.075413] RIP: 0033:0x7f688f13af10 [ 130.075414] Code: c3 48 8b 05 82 6f 2c 00 f7 db 64 89 18 48 83 cb ff eb dd 0f 1f 80 00 00 00 00 83 3d 8d d0 2c 00 00 75 10 b8 2e 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 31 c3 48 83 ec 08 e8 ae cc 00 00 48 89 04 24 [ 130.075414] RSP: 002b:00007ffe6c7d9988 EFLAGS: 00000246 ORIG_RAX: 000000000000002e [ 130.075415] RAX: ffffffffffffffda RBX: 00000000006703a0 RCX: 00007f688f13af10 [ 130.075415] RDX: 0000000000000000 RSI: 00007ffe6c7d99f0 RDI: 0000000000000003 [ 130.075416] RBP: 000000005df38312 R08: 0000000000000002 R09: 0000000000008000 [ 130.075416] R10: 00007ffe6c7d93e0 R11: 0000000000000246 R12: 0000000000000000 [ 130.075417] R13: 00007ffe6c7e9c50 R14: 0000000000000001 R15: 000000000067c600 [ 130.075418] ---[ end trace 8fbb3bf36a8671db ]--- v2: - Move the refcount_set() closer to where the hardware queue arrays are being allocated. - Fix up error path to only free hardware queue arrays when refcount reaches 0. Fixes: 2d0cb84dd973 ("cxgb4: add ETHOFLD hardware queue support") Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-18cxgb4/chtls: fix ULD connection failures due to wrong TID baseShahjada Abul Husain4-25/+31
Currently, the hardware TID index is assumed to start from index 0. However, with the following changeset, commit c21939998802 ("cxgb4: add support for high priority filters") hardware TID index can start after the high priority region, which has introduced a regression resulting in connection failures for ULDs. So, fix all related code to properly recalculate the TID start index based on whether high priority filters are enabled or not. Fixes: c21939998802 ("cxgb4: add support for high priority filters") Signed-off-by: Shahjada Abul Husain <shahjada@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-18cxgb4: fix missed high priority region calculationShahjada Abul Husain3-8/+18
commit c21939998802 ("cxgb4: add support for high priority filters") has missed considering high priority region calculation in some code paths. This patch fixes them. Fixes: c21939998802 ("cxgb4: add support for high priority filters") Signed-off-by: Shahjada Abul Husain <shahjada@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-12-15cxgb4: Fix kernel panic while accessing sge_infoVishal Kulkarni1-0/+4
The sge_info debugfs collects offload queue info even when offload capability is disabled and leads to panic. [ 144.139871] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 144.139874] CR2: 0000000000000000 CR3: 000000082d456005 CR4: 00000000001606e0 [ 144.139876] Call Trace: [ 144.139887] sge_queue_start+0x12/0x30 [cxgb4] [ 144.139897] seq_read+0x1d4/0x3d0 [ 144.139906] full_proxy_read+0x50/0x70 [ 144.139913] vfs_read+0x89/0x140 [ 144.139916] ksys_read+0x55/0xd0 [ 144.139924] do_syscall_64+0x5b/0x1d0 [ 144.139933] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 144.139936] RIP: 0033:0x7f4b01493990 Fix this crash by skipping the offload queue access in sge_qinfo when offload capability is disabled Signed-off-by: Herat Ramani <herat@chelsio.com> Signed-off-by: Vishal Kulkarni <vishal@chelsio.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
2019-12-11cxgb4: add support for high priority filtersShahjada Abul Husain9-86/+234
T6 has a separate region known as high priority filter region that allows classifying packets going through ULD path. So, query firmware for HPFILTER resources and enable the high priority offload filter support when it is available. Signed-off-by: Shahjada Abul Husain <shahjada@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-23cxgb4: add stats for MQPRIO QoS offload Tx pathRahul Lakkireddy4-1/+28
Export necessary stats for traffic flowing through MQPRIO QoS offload Tx path. v2: - No change. Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
2019-11-23cxgb4: add UDP segmentation offload supportRahul Lakkireddy6-50/+139
Implement and export UDP segmentation offload (USO) support for both NIC and MQPRIO QoS offload Tx path. Update appropriate logic in Tx to parse GSO info in skb and configure FW_ETH_TX_EO_WR request needed to perform USO. v2: - Remove inline keyword from write_eo_udp_wr() in sge.c. Let the compiler decide. Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
2019-11-23cxgb4/chcr: update SGL DMA unmap for USORahul Lakkireddy3-101/+39
The FW_ETH_TX_EO_WR used for sending UDP Segmentation Offload (USO) requests expects the headers to be part of the descriptor and the payload to be part of the SGL containing the DMA mapped addresses. Hence, the DMA address in the first entry of the SGL can start after the packet headers. Currently, unmap_sgl() tries to unmap from this wrong offset, instead of the originally mapped DMA address. So, use existing unmap_skb() instead, which takes originally saved DMA addresses as input. Update all necessary Tx paths to save the original DMA addresses, so that unmap_skb() can unmap them properly. v2: - No change. Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
2019-11-20cxgb4: add TC-MATCHALL classifier ingress offloadRahul Lakkireddy6-19/+192
Add TC-MATCHALL classifier ingress offload support. The same actions supported by existing TC-FLOWER offload can be applied to all incoming traffic on the underlying interface. Ensure the rule priority doesn't conflict with existing rules in the TCAM. Only 1 ingress matchall rule can be active at a time on the underlying interface. v5: - No change. v4: - Added check to ensure the matchall rule's prio doesn't conflict with other rules in TCAM. - Added logic to fill default mask for VIID, if none has been provided, to prevent conflict with duplicate VIID rules. - Used existing variables in private structure to fill VIID info, instead of extracting the info manually. v3: - No change. v2: - Removed logic to fetch free index from end of TCAM. Must maintain same ordering as in kernel. Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-20cxgb4: check rule prio conflicts before offloadRahul Lakkireddy5-44/+143
Only offload rule if it satisfies both of the following conditions: 1. The immediate previous rule has priority <= current rule's priority. 2. The immediate next rule has priority >= current rule's priority. Also rework free entry fetch logic to search from end of TCAM, instead of beginning, because higher indices have lower priority than lower indices. This is similar to how TC auto generates priority values. v5: - Fixed commit message and comment to include comparison for equal priority. v4: - Patch added in this version. Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-20cxgb4: add TC-MATCHALL classifier egress offloadRahul Lakkireddy9-33/+381
Add TC-MATCHALL classifier offload with TC-POLICE action applied for all outgoing traffic on the underlying interface. Split flow block offload to support both egress and ingress classification. For example, to rate limit all outgoing traffic to 1 Gbps: $ tc qdisc add dev enp2s0f4 clsact $ tc filter add dev enp2s0f4 egress matchall skip_sw \ action police rate 1Gbit burst 8Kbit Note that skip_sw is important. Otherwise, both stack and hardware will end up doing policing. Policing can't be shared across flow blocks. Only 1 egress matchall rule can be active at a time on the underlying interface. v5: - No change. v4: - Removed check to reject police offload if prio is not 1. - Moved TC_SETUP_BLOCK code to separate function. v3: - Added check to reject police offload if prio is not 1. - Assign block_shared variable only for TC_SETUP_BLOCK. v2: - Added check to reject flow block sharing for policers. Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-20cxgb4: remove unneeded semicolon for switch blockRahul Lakkireddy1-1/+1
Semicolon is not required at the end of switch block. So, remove it. Addresses coccinelle warning: drivers/net/ethernet/chelsio/cxgb4/sge.c:2260:2-3: Unneeded semicolon Fixes: 4846d5330daf ("cxgb4: add Tx and Rx path for ETHOFLD traffic") Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-14cxgb4: Fix an error code in cxgb4_mqprio_alloc_hw_resources()Dan Carpenter1-1/+3
"ret" is zero or possibly uninitialized on this error path. It should be a negative error code instead. Fixes: 2d0cb84dd973 ("cxgb4: add ETHOFLD hardware queue support") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-12cxgb4: make function 'cxgb4_mqprio_free_hw_resources' staticzhengbin1-1/+1
Fix sparse warnings: drivers/net/ethernet/chelsio/cxgb4/cxgb4_tc_mqprio.c:242:6: warning: symbol 'cxgb4_mqprio_free_hw_resources' was not declared. Should it be static? Reported-by: Hulk Robot <hulkci@huawei.com> Fixes: 2d0cb84dd973 ("cxgb4: add ETHOFLD hardware queue support") Signed-off-by: zhengbin <zhengbin13@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-12cxgb4: remove redundant assignment to hdr_lenColin Ian King1-1/+0
Variable hdr_len is being assigned a value that is never read. The assignment is redundant and hence can be removed. Addresses-Coverity: ("Unused value") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-08cxgb4: fix 64-bit division on i386Rahul Lakkireddy1-2/+2
Fix following compile error on i386 architecture. ERROR: "__udivdi3" [drivers/net/ethernet/chelsio/cxgb4/cxgb4.ko] undefined! Fixes: 0e395b3cb1fb ("cxgb4: add FLOWC based QoS offload") Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2019-11-08cxgb4: Use match_string() helper to simplify the codeYueHaibing1-11/+6
match_string() returns the array index of a matching string. Use it instead of the open-coded implementation. Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-21 16:40:56 +0300