summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/amd
AgeCommit message (Collapse)AuthorFilesLines
2022-01-28net: amd-xgbe: ensure to reset the tx_timer_active flagRaju Rangoju1-0/+2
Ensure to reset the tx_timer_active flag in xgbe_stop(), otherwise a port restart may result in tx timeout due to uncleared flag. Fixes: c635eaacbf77 ("amd-xgbe: Remove Tx coalescing") Co-developed-by: Sudheesh Mavila <sudheesh.mavila@amd.com> Signed-off-by: Sudheesh Mavila <sudheesh.mavila@amd.com> Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com> Acked-by: Tom Lendacky <thomas.lendacky@amd.com> Link: https://lore.kernel.org/r/20220127060222.453371-1-Raju.Rangoju@amd.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-01-28net: amd-xgbe: Fix skb data length underflowShyam Sundar S K1-1/+11
There will be BUG_ON() triggered in include/linux/skbuff.h leading to intermittent kernel panic, when the skb length underflow is detected. Fix this by dropping the packet if such length underflows are seen because of inconsistencies in the hardware descriptors. Fixes: 622c36f143fc ("amd-xgbe: Fix jumbo MTU processing on newer hardware") Suggested-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Acked-by: Tom Lendacky <thomas.lendacky@amd.com> Link: https://lore.kernel.org/r/20220127092003.2812745-1-Shyam-sundar.S-k@amd.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-01-25amd: declance: use eth_hw_addr_set()Thomas Bogendoerfer1-1/+3
Copy scattered mac address octets into an array then eth_hw_addr_set(). Fixes: adeef3e32146 ("net: constify netdev->dev_addr") Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Link: https://lore.kernel.org/r/20220125144007.64407-1-tsbogend@alpha.franken.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-12-21net: amd-xgbe: Disable the CDR workaround path for Yellow Carp DevicesRaju Rangoju1-2/+5
Yellow Carp Ethernet devices do not require Autonegotiation CDR workaround, hence disable the same. Co-developed-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-12-21net: amd-xgbe: Alter the port speed bit rangeRaju Rangoju2-6/+6
Newer generation Hardware uses the slightly different port speed bit widths, so alter the existing port speed bit range to extend support to the newer generation hardware while maintaining the backward compatibility with older generation hardware. The previously reserved bits are now being used which then requires the adjustment to the BIT values, e.g.: Before: PORT_PROPERTY_0[22:21] - Reserved PORT_PROPERTY_0[26:23] - Supported Speeds After: PORT_PROPERTY_0[21] - Reserved PORT_PROPERTY_0[26:22] - Supported Speeds To make this backwards compatible, the existing BIT definitions for the port speeds are incremented by one to maintain the original position. Co-developed-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-12-21net: amd-xgbe: Add Support for Yellow Carp Ethernet deviceRaju Rangoju2-0/+6
Yellow Carp Ethernet devices use the existing PCI ID but the window settings for the indirect PCS access have been altered. Add the check for Yellow Carp Ethernet devices to use the new register values. Co-developed-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-12-14net_tstamp: add new flag HWTSTAMP_FLAG_BONDED_PHC_INDEXHangbin Liu1-3/+0
Since commit 94dd016ae538 ("bond: pass get_ts_info and SIOC[SG]HWTSTAMP ioctl to active device") the user could get bond active interface's PHC index directly. But when there is a failover, the bond active interface will change, thus the PHC index is also changed. This may break the user's program if they did not update the PHC timely. This patch adds a new hwtstamp_config flag HWTSTAMP_FLAG_BONDED_PHC_INDEX. When the user wants to get the bond active interface's PHC, they need to add this flag and be aware the PHC index may be changed. With the new flag. All flag checks in current drivers are removed. Only the checking in net_hwtstamp_validate() is kept. Suggested-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-22ethtool: extend ringparam setting/getting API with rx_buf_lenHao Chen2-5/+14
Add two new parameters kernel_ringparam and extack for .get_ringparam and .set_ringparam to extend more ring params through netlink. Signed-off-by: Hao Chen <chenhao288@hisilicon.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-19amd: mvme147: use eth_hw_addr_set()Jakub Kicinski1-6/+8
Byte by byte assignments. Fixes build on m68k. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-19amd: atarilance: use eth_hw_addr_set()Jakub Kicinski1-2/+5
Byte by byte assignments. Fixes build on m68k. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-19amd: hplance: use eth_hw_addr_set()Jakub Kicinski1-1/+3
Byte by byte assignments. Fixes build on m68k. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-19amd: a2065/ariadne: use eth_hw_addr_set()Jakub Kicinski2-17/+21
dev_addr is initialized byte by byte from series. Fixes build on x86 (32bit). Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-19amd: ni65: use eth_hw_addr_set()Jakub Kicinski1-3/+5
IO reads, so save to an array then eth_hw_addr_set(). Fixes build on x86 (32bit). Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-19amd: lance: use eth_hw_addr_set()Jakub Kicinski1-1/+3
IO reads, so save to an array then eth_hw_addr_set(). Fixes build on x86 (32bit). Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski2-1/+27
Merge in the fixes we had queued in case there was another -rc. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-29net: amd-xgbe: Toggle PLL settings during rate changeShyam Sundar S K2-1/+27
For each rate change command submission, the FW has to do a phy power off sequence internally. For this to happen correctly, the PLL re-initialization control setting has to be turned off before sending mailbox commands and re-enabled once the command submission is complete. Without the PLL control setting, the link up takes longer time in a fixed phy configuration. Fixes: 47f164deab22 ("amd-xgbe: Add PCI device support") Co-developed-by: Sudheesh Mavila <sudheesh.mavila@amd.com> Signed-off-by: Sudheesh Mavila <sudheesh.mavila@amd.com> Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Acked-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-24net: convert users of bitmap_foo() to linkmode_foo()Sean Anderson1-5/+3
This converts instances of bitmap_foo(args..., __ETHTOOL_LINK_MODE_MASK_NBITS) to linkmode_foo(args...) I manually fixed up some lines to prevent them from being excessively long. Otherwise, this change was generated with the following semantic patch: // Generated with // echo linux/linkmode.h > includes // git grep -Flf includes include/ | cut -f 2- -d / | cat includes - \ // | sort | uniq | tee new_includes | wc -l && mv new_includes includes // and repeating until the number stopped going up @i@ @@ ( #include <linux/acpi_mdio.h> | #include <linux/brcmphy.h> | #include <linux/dsa/loop.h> | #include <linux/dsa/sja1105.h> | #include <linux/ethtool.h> | #include <linux/ethtool_netlink.h> | #include <linux/fec.h> | #include <linux/fs_enet_pd.h> | #include <linux/fsl/enetc_mdio.h> | #include <linux/fwnode_mdio.h> | #include <linux/linkmode.h> | #include <linux/lsm_audit.h> | #include <linux/mdio-bitbang.h> | #include <linux/mdio.h> | #include <linux/mdio-mux.h> | #include <linux/mii.h> | #include <linux/mii_timestamper.h> | #include <linux/mlx5/accel.h> | #include <linux/mlx5/cq.h> | #include <linux/mlx5/device.h> | #include <linux/mlx5/driver.h> | #include <linux/mlx5/eswitch.h> | #include <linux/mlx5/fs.h> | #include <linux/mlx5/port.h> | #include <linux/mlx5/qp.h> | #include <linux/mlx5/rsc_dump.h> | #include <linux/mlx5/transobj.h> | #include <linux/mlx5/vport.h> | #include <linux/of_mdio.h> | #include <linux/of_net.h> | #include <linux/pcs-lynx.h> | #include <linux/pcs/pcs-xpcs.h> | #include <linux/phy.h> | #include <linux/phy_led_triggers.h> | #include <linux/phylink.h> | #include <linux/platform_data/bcmgenet.h> | #include <linux/platform_data/xilinx-ll-temac.h> | #include <linux/pxa168_eth.h> | #include <linux/qed/qed_eth_if.h> | #include <linux/qed/qed_fcoe_if.h> | #include <linux/qed/qed_if.h> | #include <linux/qed/qed_iov_if.h> | #include <linux/qed/qed_iscsi_if.h> | #include <linux/qed/qed_ll2_if.h> | #include <linux/qed/qed_nvmetcp_if.h> | #include <linux/qed/qed_rdma_if.h> | #include <linux/sfp.h> | #include <linux/sh_eth.h> | #include <linux/smsc911x.h> | #include <linux/soc/nxp/lpc32xx-misc.h> | #include <linux/stmmac.h> | #include <linux/sunrpc/svc_rdma.h> | #include <linux/sxgbe_platform.h> | #include <net/cfg80211.h> | #include <net/dsa.h> | #include <net/mac80211.h> | #include <net/selftests.h> | #include <rdma/ib_addr.h> | #include <rdma/ib_cache.h> | #include <rdma/ib_cm.h> | #include <rdma/ib_hdrs.h> | #include <rdma/ib_mad.h> | #include <rdma/ib_marshall.h> | #include <rdma/ib_pack.h> | #include <rdma/ib_pma.h> | #include <rdma/ib_sa.h> | #include <rdma/ib_smi.h> | #include <rdma/ib_umem.h> | #include <rdma/ib_umem_odp.h> | #include <rdma/ib_verbs.h> | #include <rdma/iw_cm.h> | #include <rdma/mr_pool.h> | #include <rdma/opa_addr.h> | #include <rdma/opa_port_info.h> | #include <rdma/opa_smi.h> | #include <rdma/opa_vnic.h> | #include <rdma/rdma_cm.h> | #include <rdma/rdma_cm_ib.h> | #include <rdma/rdmavt_cq.h> | #include <rdma/rdma_vt.h> | #include <rdma/rdmavt_qp.h> | #include <rdma/rw.h> | #include <rdma/tid_rdma_defs.h> | #include <rdma/uverbs_ioctl.h> | #include <rdma/uverbs_named_ioctl.h> | #include <rdma/uverbs_std_types.h> | #include <rdma/uverbs_types.h> | #include <soc/mscc/ocelot.h> | #include <soc/mscc/ocelot_ptp.h> | #include <soc/mscc/ocelot_vcap.h> | #include <trace/events/ib_mad.h> | #include <trace/events/rdma_core.h> | #include <trace/events/rdma.h> | #include <trace/events/rpcrdma.h> | #include <uapi/linux/ethtool.h> | #include <uapi/linux/ethtool_netlink.h> | #include <uapi/linux/mdio.h> | #include <uapi/linux/mii.h> ) @depends on i@ expression list args; @@ ( - bitmap_zero(args, __ETHTOOL_LINK_MODE_MASK_NBITS) + linkmode_zero(args) | - bitmap_copy(args, __ETHTOOL_LINK_MODE_MASK_NBITS) + linkmode_copy(args) | - bitmap_and(args, __ETHTOOL_LINK_MODE_MASK_NBITS) + linkmode_and(args) | - bitmap_or(args, __ETHTOOL_LINK_MODE_MASK_NBITS) + linkmode_or(args) | - bitmap_empty(args, ETHTOOL_LINK_MODE_MASK_NBITS) + linkmode_empty(args) | - bitmap_andnot(args, __ETHTOOL_LINK_MODE_MASK_NBITS) + linkmode_andnot(args) | - bitmap_equal(args, __ETHTOOL_LINK_MODE_MASK_NBITS) + linkmode_equal(args) | - bitmap_intersects(args, __ETHTOOL_LINK_MODE_MASK_NBITS) + linkmode_intersects(args) | - bitmap_subset(args, __ETHTOOL_LINK_MODE_MASK_NBITS) + linkmode_subset(args) ) Add missing linux/mii.h include to mellanox. -DaveM Signed-off-by: Sean Anderson <sean.anderson@seco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-16ethernet: amd: use eth_hw_addr_set()Jakub Kicinski2-5/+12
Commit 406f42fa0d3c ("net-next: When a bond have a massive amount of VLANs...") introduced a rbtree for faster Ethernet address look up. To maintain netdev->dev_addr in this tree we need to make all the writes to it got through appropriate helpers. Read the address into an array on the stack, then call eth_hw_addr_set(). Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-14ethernet: replace netdev->dev_addr assignment loopsJakub Kicinski2-6/+2
A handful of drivers contains loops assigning the mac addr byte by byte. Convert those to eth_hw_addr_set(). Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-14ethernet: constify references to netdev->dev_addr in driversJakub Kicinski3-3/+4
This big patch sprinkles const on local variables and function arguments which may refer to netdev->dev_addr. Commit 406f42fa0d3c ("net-next: When a bond have a massive amount of VLANs...") introduced a rbtree for faster Ethernet address look up. To maintain netdev->dev_addr in this tree we need to make all the writes to it got through appropriate helpers. Some of the changes here are not strictly required - const is sometimes cast off but pointer is not used for writing. It seems like it's still better to add the const in case the code changes later or relevant -W flags get enabled for the build. No functional changes. Link: https://lore.kernel.org/r/20211014142432.449314-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-10-10ethernet: Remove redundant 'flush_workqueue()' callsChristophe JAILLET1-2/+0
'destroy_workqueue()' already drains the queue before destroying it, so there is no need to flush it explicitly. Remove the redundant 'flush_workqueue()' calls. This was generated with coccinelle: @@ expression E; @@ - flush_workqueue(E); destroy_workqueue(E); Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> #mlx* Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-07of: net: move of_net under net/Jakub Kicinski1-1/+1
Rob suggests to move of_net.c from under drivers/of/ somewhere to the networking code. Suggested-by: Rob Herring <robh@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-05ethernet: use eth_hw_addr_set() for dev->addr_len casesJakub Kicinski4-4/+4
Convert all Ethernet drivers from memcpy(... dev->addr_len) to eth_hw_addr_set(): @@ expression dev, np; @@ - memcpy(dev->dev_addr, np, dev->addr_len) + eth_hw_addr_set(dev, np) In theory addr_len may not be ETH_ALEN, but we don't expect non-Ethernet devices to live under this directory, and only the following cases of setting addr_len exist: - cxgb4 for mgmt device, and the drivers which set it to ETH_ALEN: s2io, mlx4, vxge. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-02ethernet: use eth_hw_addr_set()Jakub Kicinski4-4/+4
Convert all Ethernet drivers from memcpy(... ETH_ADDR) to eth_hw_addr_set(): @@ expression dev, np; @@ - memcpy(dev->dev_addr, np, ETH_ALEN) + eth_hw_addr_set(dev, np) Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-09net: ni65: Avoid typecast of pointer to u32Guenter Roeck1-1/+1
Building alpha:allmodconfig results in the following error. drivers/net/ethernet/amd/ni65.c: In function 'ni65_stop_start': drivers/net/ethernet/amd/ni65.c:751:37: error: cast from pointer to integer of different size buffer[i] = (u32) isa_bus_to_virt(tmdp->u.buffer); 'buffer[]' is declared as unsigned long, so replace the typecast to u32 with a typecast to unsigned long to fix the problem. Cc: Arnd Bergmann <arnd@kernel.org> Signed-off-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-24ethtool: extend coalesce setting uAPI with CQE modeYufeng Mo1-2/+6
In order to support more coalesce parameters through netlink, add two new parameter kernel_coal and extack for .set_coalesce and .get_coalesce, then some extra info can return to user with the netlink API. Signed-off-by: Yufeng Mo <moyufeng@huawei.com> Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-08-14ethernet: fix PTP_1588_CLOCK dependenciesArnd Bergmann1-1/+1
The 'imply' keyword does not do what most people think it does, it only politely asks Kconfig to turn on another symbol, but does not prevent it from being disabled manually or built as a loadable module when the user is built-in. In the ICE driver, the latter now causes a link failure: aarch64-linux-ld: drivers/net/ethernet/intel/ice/ice_main.o: in function `ice_eth_ioctl': ice_main.c:(.text+0x13b0): undefined reference to `ice_ptp_get_ts_config' ice_main.c:(.text+0x13b0): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `ice_ptp_get_ts_config' aarch64-linux-ld: ice_main.c:(.text+0x13bc): undefined reference to `ice_ptp_set_ts_config' ice_main.c:(.text+0x13bc): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `ice_ptp_set_ts_config' aarch64-linux-ld: drivers/net/ethernet/intel/ice/ice_main.o: in function `ice_prepare_for_reset': ice_main.c:(.text+0x31fc): undefined reference to `ice_ptp_release' ice_main.c:(.text+0x31fc): relocation truncated to fit: R_AARCH64_CALL26 against undefined symbol `ice_ptp_release' aarch64-linux-ld: drivers/net/ethernet/intel/ice/ice_main.o: in function `ice_rebuild': This is a recurring problem in many drivers, and we have discussed it several times befores, without reaching a consensus. I'm providing a link to the previous email thread for reference, which discusses some related problems. To solve the dependency issue better than the 'imply' keyword, introduce a separate Kconfig symbol "CONFIG_PTP_1588_CLOCK_OPTIONAL" that any driver can depend on if it is able to use PTP support when available, but works fine without it. Whenever CONFIG_PTP_1588_CLOCK=m, those drivers are then prevented from being built-in, the same way as with a 'depends on PTP_1588_CLOCK || !PTP_1588_CLOCK' dependency that does the same trick, but that can be rather confusing when you first see it. Since this should cover the dependencies correctly, the IS_REACHABLE() hack in the header is no longer needed now, and can be turned back into a normal IS_ENABLED() check. Any driver that gets the dependency wrong will now cause a link time failure rather than being unable to use PTP support when that is in a loadable module. However, the two recently added ptp_get_vclocks_index() and ptp_convert_timestamp() interfaces are only called from builtin code with ethtool and socket timestamps, so keep the current behavior by stubbing those out completely when PTP is in a loadable module. This should be addressed properly in a follow-up. As Richard suggested, we may want to actually turn PTP support into a 'bool' option later on, preventing it from being a loadable module altogether, which would be one way to solve the problem with the ethtool interface. Fixes: 06c16d89d2cb ("ice: register 1588 PTP clock device object for E810 devices") Link: https://lore.kernel.org/netdev/20210804121318.337276-1-arnd@kernel.org/ Link: https://lore.kernel.org/netdev/CAK8P3a06enZOf=XyZ+zcAwBczv41UuCTz+=0FMf2gBz1_cOnZQ@mail.gmail.com/ Link: https://lore.kernel.org/netdev/CAK8P3a3=eOxE-K25754+fB_-i_0BZzf9a9RfPTX3ppSwu9WZXw@mail.gmail.com/ Link: https://lore.kernel.org/netdev/20210726084540.3282344-1-arnd@kernel.org/ Acked-by: Shannon Nelson <snelson@pensando.io> Acked-by: Jacob Keller <jacob.e.keller@intel.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20210812183509.1362782-1-arnd@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-08-03ethernet: isa: convert to module_init/module_exitArnd Bergmann2-4/+8
There are a couple of ISA ethernet drivers that use the old init_module/cleanup_module function names for the main entry points, nothing else uses those any more. Change them to the documented method with module_init() and module_exit() markers next to static functions. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-03make legacy ISA probe optionalArnd Bergmann1-0/+2
There are very few ISA drivers left that rely on the static probing from drivers/net/Space.o. Make them all select a new CONFIG_NETDEV_LEGACY_INIT symbol, and drop the entire probe logic when that is disabled. The 9 drivers that are called from Space.c are the same set that calls netdev_boot_setup_check(). Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-03m68k: remove legacy probingArnd Bergmann3-32/+14
There are six m68k specific drivers that use the legacy probe method in drivers/net/Space.c. However, all of these only support a single device, and they completely ignore the command line settings from netdev_boot_setup_check, so there is really no point at all. Aside from sun3_82586, these already have a module_init function that can be used for built-in mode as well, simply by removing the #ifdef. Note that the 82596 driver was previously used on ISA as well, but that got dropped long ago. Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-27dev_ioctl: split out ndo_eth_ioctlArnd Bergmann4-4/+4
Most users of ndo_do_ioctl are ethernet drivers that implement the MII commands SIOCGMIIPHY/SIOCGMIIREG/SIOCSMIIREG, or hardware timestamping with SIOCSHWTSTAMP/SIOCGHWTSTAMP. Separate these from the few drivers that use ndo_do_ioctl to implement SIOCBOND, SIOCBR and SIOCWANDEV commands. This is a purely cosmetic change intended to help readers find their way through the implementation. Cc: Doug Ledford <dledford@redhat.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jay Vosburgh <j.vosburgh@gmail.com> Cc: Veaceslav Falico <vfalico@gmail.com> Cc: Andy Gospodarek <andy@greyhouse.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Vivien Didelot <vivien.didelot@gmail.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Vladimir Oltean <olteanv@gmail.com> Cc: Leon Romanovsky <leon@kernel.org> Cc: linux-rdma@vger.kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-19net: amd: remove leading spaces before tabsHui Tang8-27/+27
There are a few leading spaces before tabs and remove it by running the following commard: $ find . -name '*.c' | xargs sed -r -i 's/^[ ]+\t/\t/' $ find . -name '*.h' | xargs sed -r -i 's/^[ ]+\t/\t/' Signed-off-by: Hui Tang <tanghui20@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-07treewide: remove editor modelines and cruftMasahiro Yamada2-15/+0
The section "19) Editor modelines and other cruft" in Documentation/process/coding-style.rst clearly says, "Do not include any of these in source files." I recently receive a patch to explicitly add a new one. Let's do treewide cleanups, otherwise some people follow the existing code and attempt to upstream their favoriate editor setups. It is even nicer if scripts/checkpatch.pl can check it. If we like to impose coding style in an editor-independent manner, I think editorconfig (patch [1]) is a saner solution. [1] https://lore.kernel.org/lkml/20200703073143.423557-1-danny@kdrag0n.dev/ Link: https://lkml.kernel.org/r/20210324054457.1477489-1-masahiroy@kernel.org Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Reviewed-by: Miguel Ojeda <ojeda@kernel.org> [auxdisplay] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-04-26pcnet32: Remove redundant variable prev_link and curr_linkJiapeng Chong1-2/+1
Variable prev_link and curr_link is being assigned a value from a calculation however the variable is never read, so this redundant variable can be removed. Cleans up the following clang-analyzer warning: drivers/net/ethernet/amd/pcnet32.c:2857:4: warning: Value stored to 'prev_link' is never read [clang-analyzer-deadcode.DeadStores]. drivers/net/ethernet/amd/pcnet32.c:2856:4: warning: Value stored to 'curr_link' is never read [clang-analyzer-deadcode.DeadStores]. Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-10Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski2-5/+6
Conflicts: MAINTAINERS - keep Chandrasekar drivers/net/ethernet/mellanox/mlx5/core/en_main.c - simple fix + trust the code re-added to param.c in -next is fine include/linux/bpf.h - trivial include/linux/ethtool.h - trivial, fix kdoc while at it include/linux/skmsg.h - move to relevant place in tcp.c, comment re-wrapped net/core/skmsg.c - add the sk = sk // sk = NULL around calls net/tipc/crypto.c - trivial Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-04-07pcnet32: Use pci_resource_len to validate PCI resourceGuenter Roeck1-2/+3
pci_resource_start() is not a good indicator to determine if a PCI resource exists or not, since the resource may start at address 0. This is seen when trying to instantiate the driver in qemu for riscv32 or riscv64. pci 0000:00:01.0: reg 0x10: [io 0x0000-0x001f] pci 0000:00:01.0: reg 0x14: [mem 0x00000000-0x0000001f] ... pcnet32: card has no PCI IO resources, aborting Use pci_resouce_len() instead. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-01net: amd: correct some format issuesYixing Liu1-0/+3
There should be a blank line after declarations. Signed-off-by: Yixing Liu <liuyixing1@huawei.com> Signed-off-by: Weihang Li <liweihang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-04-01net: amd8111e: fix inappropriate spacesYixing Liu1-185/+177
Delete unncecessary spaces and add some reasonable spaces according to the coding-style of kernel. Signed-off-by: Yixing Liu <liuyixing1@huawei.com> Signed-off-by: Weihang Li <liweihang@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-03-26amd-xgbe: Update DMA coherency valuesShyam Sundar S K1-3/+3
Based on the IOMMU configuration, the current cache control settings can result in possible coherency issues. The hardware team has recommended new settings for the PCI device path to eliminate the issue. Fixes: 6f595959c095 ("amd-xgbe: Adjust register settings to improve performance") Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Acked-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-17Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netDavid S. Miller4-3/+54
2021-02-17net: amd-xgbe: Fix network fluctuations when using 1G BELFUSE SFPShyam Sundar S K1-0/+3
Frequent link up/down events can happen when a Bel Fuse SFP part is connected to the amd-xgbe device. Try to avoid the frequent link issues by resetting the PHY as documented in Bel Fuse SFP datasheets. Fixes: e722ec82374b ("amd-xgbe: Update the BelFuse quirk to support SGMII") Co-developed-by: Sudheesh Mavila <sudheesh.mavila@amd.com> Signed-off-by: Sudheesh Mavila <sudheesh.mavila@amd.com> Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Acked-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-17net: amd-xgbe: Reset link when the link never comes backShyam Sundar S K2-1/+9
Normally, auto negotiation and reconnect should be automatically done by the hardware. But there seems to be an issue where auto negotiation has to be restarted manually. This happens because of link training and so even though still connected to the partner the link never "comes back". This needs an auto-negotiation restart. Also, a change in xgbe-mdio is needed to get ethtool to recognize the link down and get the link change message. This change is only required in a backplane connection mode. Fixes: abf0a1c2b26a ("amd-xgbe: Add support for SFP+ modules") Co-developed-by: Sudheesh Mavila <sudheesh.mavila@amd.com> Signed-off-by: Sudheesh Mavila <sudheesh.mavila@amd.com> Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Acked-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-17net: amd-xgbe: Fix NETDEV WATCHDOG transmit queue timeout warningShyam Sundar S K2-1/+1
The current driver calls netif_carrier_off() late in the link tear down which can result in a netdev watchdog timeout. Calling netif_carrier_off() immediately after netif_tx_stop_all_queues() avoids the warning. ------------[ cut here ]------------ NETDEV WATCHDOG: enp3s0f2 (amd-xgbe): transmit queue 0 timed out WARNING: CPU: 3 PID: 0 at net/sched/sch_generic.c:461 dev_watchdog+0x20d/0x220 Modules linked in: amd_xgbe(E) amd-xgbe 0000:03:00.2 enp3s0f2: Link is Down CPU: 3 PID: 0 Comm: swapper/3 Tainted: G E Hardware name: AMD Bilby-RV2/Bilby-RV2, BIOS RBB1202A 10/18/2019 RIP: 0010:dev_watchdog+0x20d/0x220 Code: 00 49 63 4e e0 eb 92 4c 89 e7 c6 05 c6 e2 c1 00 01 e8 e7 ce fc ff 89 d9 48 RSP: 0018:ffff90cfc28c3e88 EFLAGS: 00010286 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000006 RDX: 0000000000000007 RSI: 0000000000000086 RDI: ffff90cfc28d63c0 RBP: ffff90cfb977845c R08: 0000000000000050 R09: 0000000000196018 R10: ffff90cfc28c3ef8 R11: 0000000000000000 R12: ffff90cfb9778000 R13: 0000000000000003 R14: ffff90cfb9778480 R15: 0000000000000010 FS: 0000000000000000(0000) GS:ffff90cfc28c0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f240ff2d9d0 CR3: 00000001e3e0a000 CR4: 00000000003406e0 Call Trace: <IRQ> ? pfifo_fast_reset+0x100/0x100 call_timer_fn+0x2b/0x130 run_timer_softirq+0x3e8/0x440 ? enqueue_hrtimer+0x39/0x90 Fixes: e722ec82374b ("amd-xgbe: Update the BelFuse quirk to support SGMII") Co-developed-by: Sudheesh Mavila <sudheesh.mavila@amd.com> Signed-off-by: Sudheesh Mavila <sudheesh.mavila@amd.com> Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Acked-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-02-17net: amd-xgbe: Reset the PHY rx data path when mailbox command timeoutShyam Sundar S K2-1/+41
Sometimes mailbox commands timeout when the RX data path becomes unresponsive. This prevents the submission of new mailbox commands to DXIO. This patch identifies the timeout and resets the RX data path so that the next message can be submitted properly. Fixes: 549b32af9f7c ("amd-xgbe: Simplify mailbox interface rate change code") Co-developed-by: Sudheesh Mavila <sudheesh.mavila@amd.com> Signed-off-by: Sudheesh Mavila <sudheesh.mavila@amd.com> Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Acked-by: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-01-07net: remove ndo_udp_tunnel_* callbacksJakub Kicinski1-2/+0
All UDP tunnel port management is now routed via udp_tunnel_nic infra directly. Remove the old callbacks. Reviewed-by: Alexander Duyck <alexanderduyck@fb.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-30net: remove am79c961a driverArnd Bergmann4-916/+1
This driver was only used on the EBSA110 platform, which is now getting removed, so the driver is no longer needed either. Acked-by: Russell King <rmk+kernel@armlinux.org.uk> Acked-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2020-10-16Merge tag 'net-next-5.10' of ↵Linus Torvalds4-33/+19
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: - Add redirect_neigh() BPF packet redirect helper, allowing to limit stack traversal in common container configs and improving TCP back-pressure. Daniel reports ~10Gbps => ~15Gbps single stream TCP performance gain. - Expand netlink policy support and improve policy export to user space. (Ge)netlink core performs request validation according to declared policies. Expand the expressiveness of those policies (min/max length and bitmasks). Allow dumping policies for particular commands. This is used for feature discovery by user space (instead of kernel version parsing or trial and error). - Support IGMPv3/MLDv2 multicast listener discovery protocols in bridge. - Allow more than 255 IPv4 multicast interfaces. - Add support for Type of Service (ToS) reflection in SYN/SYN-ACK packets of TCPv6. - In Multi-patch TCP (MPTCP) support concurrent transmission of data on multiple subflows in a load balancing scenario. Enhance advertising addresses via the RM_ADDR/ADD_ADDR options. - Support SMC-Dv2 version of SMC, which enables multi-subnet deployments. - Allow more calls to same peer in RxRPC. - Support two new Controller Area Network (CAN) protocols - CAN-FD and ISO 15765-2:2016. - Add xfrm/IPsec compat layer, solving the 32bit user space on 64bit kernel problem. - Add TC actions for implementing MPLS L2 VPNs. - Improve nexthop code - e.g. handle various corner cases when nexthop objects are removed from groups better, skip unnecessary notifications and make it easier to offload nexthops into HW by converting to a blocking notifier. - Support adding and consuming TCP header options by BPF programs, opening the doors for easy experimental and deployment-specific TCP option use. - Reorganize TCP congestion control (CC) initialization to simplify life of TCP CC implemented in BPF. - Add support for shipping BPF programs with the kernel and loading them early on boot via the User Mode Driver mechanism, hence reusing all the user space infra we have. - Support sleepable BPF programs, initially targeting LSM and tracing. - Add bpf_d_path() helper for returning full path for given 'struct path'. - Make bpf_tail_call compatible with bpf-to-bpf calls. - Allow BPF programs to call map_update_elem on sockmaps. - Add BPF Type Format (BTF) support for type and enum discovery, as well as support for using BTF within the kernel itself (current use is for pretty printing structures). - Support listing and getting information about bpf_links via the bpf syscall. - Enhance kernel interfaces around NIC firmware update. Allow specifying overwrite mask to control if settings etc. are reset during update; report expected max time operation may take to users; support firmware activation without machine reboot incl. limits of how much impact reset may have (e.g. dropping link or not). - Extend ethtool configuration interface to report IEEE-standard counters, to limit the need for per-vendor logic in user space. - Adopt or extend devlink use for debug, monitoring, fw update in many drivers (dsa loop, ice, ionic, sja1105, qed, mlxsw, mv88e6xxx, dpaa2-eth). - In mlxsw expose critical and emergency SFP module temperature alarms. Refactor port buffer handling to make the defaults more suitable and support setting these values explicitly via the DCBNL interface. - Add XDP support for Intel's igb driver. - Support offloading TC flower classification and filtering rules to mscc_ocelot switches. - Add PTP support for Marvell Octeontx2 and PP2.2 hardware, as well as fixed interval period pulse generator and one-step timestamping in dpaa-eth. - Add support for various auth offloads in WiFi APs, e.g. SAE (WPA3) offload. - Add Lynx PHY/PCS MDIO module, and convert various drivers which have this HW to use it. Convert mvpp2 to split PCS. - Support Marvell Prestera 98DX3255 24-port switch ASICs, as well as 7-port Mediatek MT7531 IP. - Add initial support for QCA6390 and IPQ6018 in ath11k WiFi driver, and wcn3680 support in wcn36xx. - Improve performance for packets which don't require much offloads on recent Mellanox NICs by 20% by making multiple packets share a descriptor entry. - Move chelsio inline crypto drivers (for TLS and IPsec) from the crypto subtree to drivers/net. Move MDIO drivers out of the phy directory. - Clean up a lot of W=1 warnings, reportedly the actively developed subsections of networking drivers should now build W=1 warning free. - Make sure drivers don't use in_interrupt() to dynamically adapt their code. Convert tasklets to use new tasklet_setup API (sadly this conversion is not yet complete). * tag 'net-next-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2583 commits) Revert "bpfilter: Fix build error with CONFIG_BPFILTER_UMH" net, sockmap: Don't call bpf_prog_put() on NULL pointer bpf, selftest: Fix flaky tcp_hdr_options test when adding addr to lo bpf, sockmap: Add locking annotations to iterator netfilter: nftables: allow re-computing sctp CRC-32C in 'payload' statements net: fix pos incrementment in ipv6_route_seq_next net/smc: fix invalid return code in smcd_new_buf_create() net/smc: fix valid DMBE buffer sizes net/smc: fix use-after-free of delayed events bpfilter: Fix build error with CONFIG_BPFILTER_UMH cxgb4/ch_ipsec: Replace the module name to ch_ipsec from chcr net: sched: Fix suspicious RCU usage while accessing tcf_tunnel_info bpf: Fix register equivalence tracking. rxrpc: Fix loss of final ack on shutdown rxrpc: Fix bundle counting for exclusive connections netfilter: restore NF_INET_NUMHOOKS ibmveth: Identify ingress large send packets. ibmveth: Switch order of ibmveth_helper calls. cxgb4: handle 4-tuple PEDIT to NAT mode translation selftests: Add VRF route leaking tests ...
2020-09-30net: sun3lance: Remove redundant checks in interrupt handlerSebastian Andrzej Siewior1-11/+0
lance_interrupt() contains two pointless checks: - A check whether the 'dev_id' argument is NULL. 'dev_id' is the pointer which was handed in to request_irq() and the interrupt handler will always be invoked with that pointer as 'dev_id' argument by the core code. - A check for interrupt reentrancy. The core code already guarantees non-reentrancy of interrupt handlers. Remove these check. Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2020-09-25net/au1000-eth: stop using DMA_ATTR_NON_CONSISTENTChristoph Hellwig1-9/+6
The au1000-eth driver contains none of the manual cache synchronization required for using DMA_ATTR_NON_CONSISTENT. From what I can tell it can be used on both dma coherent and non-coherent DMA platforms, but I suspect it has been buggy on the non-coherent platforms all along. Signed-off-by: Christoph Hellwig <hch@lst.de>
2020-09-14net: amd-xgbe: convert tasklets to use new tasklet_setup() APIAllen Pais3-22/+19
In preparation for unconditionally passing the struct tasklet_struct pointer to all tasklet callbacks, switch to using the new tasklet_setup() and from_tasklet() to pass the tasklet pointer explicitly. Signed-off-by: Romain Perier <romain.perier@gmail.com> Signed-off-by: Allen Pais <apais@linux.microsoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-30 08:29:17 +0300