summaryrefslogtreecommitdiff
path: root/drivers/net/dsa
AgeCommit message (Collapse)AuthorFilesLines
2023-12-13net: dsa: microchip: provide a list of valid protocols for xmit handlerSean Nyekjaer1-4/+12
[ Upstream commit 1499b89289bf272fd83cb296c82fb5519d0fe93f ] Provide a list of valid protocols for which the driver will provide it's deferred xmit handler. When using DSA_TAG_PROTO_KSZ8795 protocol, it does not provide a "connect" method, therefor ksz_connect() is not allocating ksz_tagger_data. This avoids the following null pointer dereference: ksz_connect_tag_protocol from dsa_register_switch+0x9ac/0xee0 dsa_register_switch from ksz_switch_register+0x65c/0x828 ksz_switch_register from ksz_spi_probe+0x11c/0x168 ksz_spi_probe from spi_probe+0x84/0xa8 spi_probe from really_probe+0xc8/0x2d8 Fixes: ab32f56a4100 ("net: dsa: microchip: ptp: add packet transmission timestamping") Signed-off-by: Sean Nyekjaer <sean@geanix.com> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Link: https://lore.kernel.org/r/20231206071655.1626479-1-sean@geanix.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-12-13net: dsa: mv88e6xxx: Restore USXGMII support for 6393XTobias Waldekranz1-2/+29
[ Upstream commit 0c7ed1f9197aecada33a08b022e484a97bf584ba ] In 4a56212774ac, USXGMII support was added for 6393X, but this was lost in the PCS conversion (the blamed commit), most likely because these efforts where more or less done in parallel. Restore this feature by porting Michal's patch to fit the new implementation. Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Tested-by: Michal Smulski <michal.smulski@ooma.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Fixes: e5b732a275f5 ("net: dsa: mv88e6xxx: convert 88e639x to phylink_pcs") Signed-off-by: Tobias Waldekranz <tobias@waldekranz.com> Link: https://lore.kernel.org/r/20231205221359.3926018-1-tobias@waldekranz.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-12-08net: dsa: mv88e6xxx: fix marvell 6350 probe crashGreg Ungerer1-2/+4
[ Upstream commit a524eabcd72d28425d9db242cf375d0389d74eba ] As of commit b92143d4420f ("net: dsa: mv88e6xxx: add infrastructure for phylink_pcs") probing of a Marvell 88e6350 switch causes a NULL pointer de-reference like this example: ... mv88e6085 d0072004.mdio-mii:11: switch 0x3710 detected: Marvell 88E6350, revision 2 8<--- cut here --- Unable to handle kernel NULL pointer dereference at virtual address 00000000 when read [00000000] *pgd=00000000 Internal error: Oops: 5 [#1] ARM Modules linked in: CPU: 0 PID: 8 Comm: kworker/u2:0 Not tainted 6.7.0-rc2-dirty #26 Hardware name: Marvell Armada 370/XP (Device Tree) Workqueue: events_unbound deferred_probe_work_func PC is at mv88e6xxx_port_setup+0x1c/0x44 LR is at dsa_port_devlink_setup+0x74/0x154 pc : [<c057ea24>] lr : [<c0819598>] psr: a0000013 sp : c184fce0 ip : c542b8f4 fp : 00000000 r10: 00000001 r9 : c542a540 r8 : c542bc00 r7 : c542b838 r6 : c5244580 r5 : 00000005 r4 : c5244580 r3 : 00000000 r2 : c542b840 r1 : 00000005 r0 : c1a02040 ... The Marvell 6350 switch has no SERDES interface and so has no corresponding pcs_ops defined for it. But during probing a call is made to mv88e6xxx_port_setup() which unconditionally expects pcs_ops to exist - though the presence of the pcs_ops->pcs_init function is optional. Modify code to check for pcs_ops first, before checking for and calling pcs_ops->pcs_init. Modify checking and use of pcs_ops->pcs_teardown which may potentially suffer the same problem. Fixes: b92143d4420f ("net: dsa: mv88e6xxx: add infrastructure for phylink_pcs") Signed-off-by: Greg Ungerer <gerg@kernel.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-12-08net: dsa: mv88e6xxx: fix marvell 6350 switch probingGreg Ungerer1-4/+16
[ Upstream commit b3f1a164c7f742503dc7159011f7ad6b092b660e ] As of commit de5c9bf40c45 ("net: phylink: require supported_interfaces to be filled") Marvell 88e6350 switches fail to be probed: ... mv88e6085 d0072004.mdio-mii:11: switch 0x3710 detected: Marvell 88E6350, revision 2 mv88e6085 d0072004.mdio-mii:11: phylink: error: empty supported_interfaces error creating PHYLINK: -22 mv88e6085: probe of d0072004.mdio-mii:11 failed with error -22 ... The problem stems from the use of mv88e6185_phylink_get_caps() to get the device capabilities. Create a new dedicated phylink_get_caps for the 6351 family (which the 6350 is one of) to properly support their set of capabilities. According to chip.h the 6351 switch family includes the 6171, 6175, 6350 and 6351 switches, so update each of these to use the correct phylink_get_caps. Fixes: de5c9bf40c45 ("net: phylink: require supported_interfaces to be filled") Signed-off-by: Greg Ungerer <gerg@kernel.org> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-11-28net: dsa: lan9303: consequently nested-lock physical MDIOAlexander Sverdlin1-2/+2
commit 5a22fbcc10f3f7d94c5d88afbbffa240a3677057 upstream. When LAN9303 is MDIO-connected two callchains exist into mdio->bus->write(): 1. switch ports 1&2 ("physical" PHYs): virtual (switch-internal) MDIO bus (lan9303_switch_ops->phy_{read|write})-> lan9303_mdio_phy_{read|write} -> mdiobus_{read|write}_nested 2. LAN9303 virtual PHY: virtual MDIO bus (lan9303_phy_{read|write}) -> lan9303_virt_phy_reg_{read|write} -> regmap -> lan9303_mdio_{read|write} If the latter functions just take mutex_lock(&sw_dev->device->bus->mdio_lock) it triggers a LOCKDEP false-positive splat. It's false-positive because the first mdio_lock in the second callchain above belongs to virtual MDIO bus, the second mdio_lock belongs to physical MDIO bus. Consequent annotation in lan9303_mdio_{read|write} as nested lock (similar to lan9303_mdio_phy_{read|write}, it's the same physical MDIO bus) prevents the following splat: WARNING: possible circular locking dependency detected 5.15.71 #1 Not tainted ------------------------------------------------------ kworker/u4:3/609 is trying to acquire lock: ffff000011531c68 (lan9303_mdio:131:(&lan9303_mdio_regmap_config)->lock){+.+.}-{3:3}, at: regmap_lock_mutex but task is already holding lock: ffff0000114c44d8 (&bus->mdio_lock){+.+.}-{3:3}, at: mdiobus_read which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (&bus->mdio_lock){+.+.}-{3:3}: lock_acquire __mutex_lock mutex_lock_nested lan9303_mdio_read _regmap_read regmap_read lan9303_probe lan9303_mdio_probe mdio_probe really_probe __driver_probe_device driver_probe_device __device_attach_driver bus_for_each_drv __device_attach device_initial_probe bus_probe_device deferred_probe_work_func process_one_work worker_thread kthread ret_from_fork -> #0 (lan9303_mdio:131:(&lan9303_mdio_regmap_config)->lock){+.+.}-{3:3}: __lock_acquire lock_acquire.part.0 lock_acquire __mutex_lock mutex_lock_nested regmap_lock_mutex regmap_read lan9303_phy_read dsa_slave_phy_read __mdiobus_read mdiobus_read get_phy_device mdiobus_scan __mdiobus_register dsa_register_switch lan9303_probe lan9303_mdio_probe mdio_probe really_probe __driver_probe_device driver_probe_device __device_attach_driver bus_for_each_drv __device_attach device_initial_probe bus_probe_device deferred_probe_work_func process_one_work worker_thread kthread ret_from_fork other info that might help us debug this: Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&bus->mdio_lock); lock(lan9303_mdio:131:(&lan9303_mdio_regmap_config)->lock); lock(&bus->mdio_lock); lock(lan9303_mdio:131:(&lan9303_mdio_regmap_config)->lock); *** DEADLOCK *** 5 locks held by kworker/u4:3/609: #0: ffff000002842938 ((wq_completion)events_unbound){+.+.}-{0:0}, at: process_one_work #1: ffff80000bacbd60 (deferred_probe_work){+.+.}-{0:0}, at: process_one_work #2: ffff000007645178 (&dev->mutex){....}-{3:3}, at: __device_attach #3: ffff8000096e6e78 (dsa2_mutex){+.+.}-{3:3}, at: dsa_register_switch #4: ffff0000114c44d8 (&bus->mdio_lock){+.+.}-{3:3}, at: mdiobus_read stack backtrace: CPU: 1 PID: 609 Comm: kworker/u4:3 Not tainted 5.15.71 #1 Workqueue: events_unbound deferred_probe_work_func Call trace: dump_backtrace show_stack dump_stack_lvl dump_stack print_circular_bug check_noncircular __lock_acquire lock_acquire.part.0 lock_acquire __mutex_lock mutex_lock_nested regmap_lock_mutex regmap_read lan9303_phy_read dsa_slave_phy_read __mdiobus_read mdiobus_read get_phy_device mdiobus_scan __mdiobus_register dsa_register_switch lan9303_probe lan9303_mdio_probe ... Cc: stable@vger.kernel.org Fixes: dc7005831523 ("net: dsa: LAN9303: add MDIO managed mode support") Signed-off-by: Alexander Sverdlin <alexander.sverdlin@siemens.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20231027065741.534971-1-alexander.sverdlin@siemens.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-10-14net: dsa: bcm_sf2: Fix possible memory leak in bcm_sf2_mdio_register()Jinjie Ruan1-9/+15
In bcm_sf2_mdio_register(), the class_find_device() will call get_device() to increment reference count for priv->master_mii_bus->dev if of_mdio_find_bus() succeeds. If mdiobus_alloc() or mdiobus_register() fails, it will call get_device() twice without decrement reference count for the device. And it is the same if bcm_sf2_mdio_register() succeeds but fails in bcm_sf2_sw_probe(), or if bcm_sf2_sw_probe() succeeds. If the reference count has not decremented to zero, the dev related resource will not be freed. So remove the get_device() in bcm_sf2_mdio_register(), and call put_device() if mdiobus_alloc() or mdiobus_register() fails and in bcm_sf2_mdio_unregister() to solve the issue. And as Simon suggested, unwind from errors for bcm_sf2_mdio_register() and just return 0 if it succeeds to make it cleaner. Fixes: 461cd1b03e32 ("net: dsa: bcm_sf2: Register our slave MDIO bus") Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com> Suggested-by: Simon Horman <horms@kernel.org> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231011032419.2423290-1-ruanjinjie@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-10-06net: dsa: qca8k: fix potential MDIO bus conflict when accessing internal ↵Marek Behún1-0/+11
PHYs via management frames Besides the QCA8337 switch the Turris 1.x device has on it's MDIO bus also Micron ethernet PHY (dedicated to the WAN port). We've been experiencing a strange behavior of the WAN ethernet interface, wherein the WAN PHY started timing out the MDIO accesses, for example when the interface was brought down and then back up. Bisecting led to commit 2cd548566384 ("net: dsa: qca8k: add support for phy read/write with mgmt Ethernet"), which added support to access the QCA8337 switch's internal PHYs via management ethernet frames. Connecting the MDIO bus pins onto an oscilloscope, I was able to see that the MDIO bus was active whenever a request to read/write an internal PHY register was done via an management ethernet frame. My theory is that when the switch core always communicates with the internal PHYs via the MDIO bus, even when externally we request the access via ethernet. This MDIO bus is the same one via which the switch and internal PHYs are accessible to the board, and the board may have other devices connected on this bus. An ASCII illustration may give more insight: +---------+ +----| | | | WAN PHY | | +--| | | | +---------+ | | | | +----------------------------------+ | | | QCA8337 | MDC | | | +-------+ | ------o-+--|--------o------------o--| | | MDIO | | | | | PHY 1 |-|--to RJ45 --------o--|---o----+---------o--+--| | | | | | | | +-------+ | | +-------------+ | o--| | | | | MDIO MDC | | | | PHY 2 |-|--to RJ45 eth1 | | | o--+--| | | -----------|-|port0 | | | +-------+ | | | | | o--| | | | | switch core | | | | PHY 3 |-|--to RJ45 | +-------------+ o--+--| | | | | | +-------+ | | | o--| ... | | +----------------------------------+ When we send a request to read an internal PHY register via an ethernet management frame via eth1, the switch core receives the ethernet frame on port 0 and then communicates with the internal PHY via MDIO. At this time, other potential devices, such as the WAN PHY on Turris 1.x, cannot use the MDIO bus, since it may cause a bus conflict. Fix this issue by locking the MDIO bus even when we are accessing the PHY registers via ethernet management frames. Fixes: 2cd548566384 ("net: dsa: qca8k: add support for phy read/write with mgmt Ethernet") Signed-off-by: Marek Behún <kabel@kernel.org> Reviewed-by: Christian Marangi <ansuelsmth@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-10-06net: dsa: qca8k: fix regmap bulk read/write methods on big endian systemsMarek Behún1-2/+2
Commit c766e077d927 ("net: dsa: qca8k: convert to regmap read/write API") introduced bulk read/write methods to qca8k's regmap. The regmap bulk read/write methods get the register address in a buffer passed as a void pointer parameter (the same buffer contains also the read/written values). The register address occupies only as many bytes as it requires at the beginning of this buffer. For example if the .reg_bits member in regmap_config is 16 (as is the case for this driver), the register address occupies only the first 2 bytes in this buffer, so it can be cast to u16. But the original commit implementing these bulk read/write methods cast the buffer to u32: u32 reg = *(u32 *)reg_buf & U16_MAX; taking the first 4 bytes. This works on little endian systems where the first 2 bytes of the buffer correspond to the low 16-bits, but it obviously cannot work on big endian systems. Fix this by casting the beginning of the buffer to u16 as u32 reg = *(u16 *)reg_buf; Fixes: c766e077d927 ("net: dsa: qca8k: convert to regmap read/write API") Signed-off-by: Marek Behún <kabel@kernel.org> Tested-by: Christian Marangi <ansuelsmth@gmail.com> Reviewed-by: Christian Marangi <ansuelsmth@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-10-02net: dsa: mv88e6xxx: Avoid EEPROM timeout when EEPROM is absentFabio Estevam5-35/+6
Since commit 23d775f12dcd ("net: dsa: mv88e6xxx: Wait for EEPROM done before HW reset") the following error is seen on a imx8mn board with a 88E6320 switch: mv88e6085 30be0000.ethernet-1:00: Timeout waiting for EEPROM done This board does not have an EEPROM attached to the switch though. This problem is well explained by Andrew Lunn: "If there is an EEPROM, and the EEPROM contains a lot of data, it could be that when we perform a hardware reset towards the end of probe, it interrupts an I2C bus transaction, leaving the I2C bus in a bad state, and future reads of the EEPROM do not work. The work around for this was to poll the EEInt status and wait for it to go true before performing the hardware reset. However, we have discovered that for some boards which do not have an EEPROM, EEInt never indicates complete. As a result, mv88e6xxx_g1_wait_eeprom_done() spins for a second and then prints a warning. We probably need a different solution than calling mv88e6xxx_g1_wait_eeprom_done(). The datasheet for 6352 documents the EEPROM Command register: bit 15 is: EEPROM Unit Busy. This bit must be set to a one to start an EEPROM operation (see EEOp below). Only one EEPROM operation can be executing at one time so this bit must be zero before setting it to a one. When the requested EEPROM operation completes this bit will automatically be cleared to a zero. The transition of this bit from a one to a zero can be used to generate an interrupt (the EEInt in Global 1, offset 0x00). and more interesting is bit 11: Register Loader Running. This bit is set to one whenever the register loader is busy executing instructions contained in the EEPROM." Change to using mv88e6xxx_g2_eeprom_wait() to fix the timeout error when the EEPROM chip is not present. Fixes: 23d775f12dcd ("net: dsa: mv88e6xxx: Wait for EEPROM done before HW reset") Suggested-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Fabio Estevam <festevam@denx.de> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-09-11net: dsa: sja1105: block FDB accesses that are concurrent with a switch resetVladimir Oltean1-0/+2
Currently, when we add the first sja1105 port to a bridge with vlan_filtering 1, then we sometimes see this output: sja1105 spi2.2: port 4 failed to read back entry for be:79:b4:9e:9e:96 vid 3088: -ENOENT sja1105 spi2.2: Reset switch and programmed static config. Reason: VLAN filtering sja1105 spi2.2: port 0 failed to add be:79:b4:9e:9e:96 vid 0 to fdb: -2 It is because sja1105_fdb_add() runs from the dsa_owq which is no longer serialized with switch resets since it dropped the rtnl_lock() in the blamed commit. Either performing the FDB accesses before the reset, or after the reset, is equally fine, because sja1105_static_fdb_change() backs up those changes in the static config, but FDB access during reset isn't ok. Make sja1105_static_config_reload() take the fdb_lock to fix that. Fixes: 0faf890fc519 ("net: dsa: drop rtnl_lock from dsa_slave_switchdev_event_work") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-09-11net: dsa: sja1105: serialize sja1105_port_mcast_flood() with other FDB accessesVladimir Oltean2-13/+45
sja1105_fdb_add() runs from the dsa_owq, and sja1105_port_mcast_flood() runs from switchdev_deferred_process_work(). Prior to the blamed commit, they used to be indirectly serialized through the rtnl_lock(), which no longer holds true because dsa_owq dropped that. So, it is now possible that we traverse the static config BLK_IDX_L2_LOOKUP elements concurrently compared to when we change them, in sja1105_static_fdb_change(). That is not ideal, since it might result in data corruption. Introduce a mutex which serializes accesses to the hardware FDB and to the static config elements for the L2 Address Lookup table. I can't find a good reason to add locking around sja1105_fdb_dump(). I'll add it later if needed. Fixes: 0faf890fc519 ("net: dsa: drop rtnl_lock from dsa_slave_switchdev_event_work") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-09-11net: dsa: sja1105: fix multicast forwarding working only for last added mdb ↵Vladimir Oltean1-43/+37
entry The commit cited in Fixes: did 2 things: it refactored the read-back polling from sja1105_dynamic_config_read() into a new function, sja1105_dynamic_config_wait_complete(), and it called that from sja1105_dynamic_config_write() too. What is problematic is the refactoring. The refactored code from sja1105_dynamic_config_poll_valid() works like the previous one, but the problem is that it uses another packed_buf[] SPI buffer, and there was code at the end of sja1105_dynamic_config_read() which was relying on the read-back packed_buf[]: /* Don't dereference possibly NULL pointer - maybe caller * only wanted to see whether the entry existed or not. */ if (entry) ops->entry_packing(packed_buf, entry, UNPACK); After the change, the packed_buf[] that this code sees is no longer the entry read back from hardware, but the original entry that the caller passed to the sja1105_dynamic_config_read(), packed into this buffer. This difference is the most notable with the SJA1105_SEARCH uses from sja1105pqrs_fdb_add() - used for both fdb and mdb. There, we have logic added by commit 728db843df88 ("net: dsa: sja1105: ignore the FDB entry for unknown multicast when adding a new address") to figure out whether the address we're trying to add matches on any existing hardware entry, with the exception of the catch-all multicast address. That logic was broken, because with sja1105_dynamic_config_read() not working properly, it doesn't return us the entry read back from hardware, but the entry that we passed to it. And, since for multicast, a match will always exist, it will tell us that any mdb entry already exists at index=0 L2 Address Lookup table. It is index=0 because the caller doesn't know the index - it wants to find it out, and sja1105_dynamic_config_read() does: if (index < 0) { // SJA1105_SEARCH /* Avoid copying a signed negative number to an u64 */ cmd.index = 0; // <- this cmd.search = true; } else { cmd.index = index; cmd.search = false; } So, to the caller of sja1105_dynamic_config_read(), the returned info looks entirely legit, and it will add all mdb entries to FDB index 0. There, they will always overwrite each other (not to mention, potentially they can also overwrite a pre-existing bridge fdb entry), and the user-visible impact will be that only the last mdb entry will be forwarded as it should. The others won't (will be flooded or dropped, depending on the egress flood settings). Fixing is a bit more complicated, and involves either passing the same packed_buf[] to sja1105_dynamic_config_wait_complete(), or moving all the extra processing on the packed_buf[] to sja1105_dynamic_config_wait_complete(). I've opted for the latter, because it makes sja1105_dynamic_config_wait_complete() a bit more self-contained. Fixes: df405910ab9f ("net: dsa: sja1105: wait for dynamic config command completion on writes too") Reported-by: Yanan Yang <yanan.yang@nxp.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-09-11net: dsa: sja1105: propagate exact error code from ↵Vladimir Oltean1-7/+8
sja1105_dynamic_config_poll_valid() Currently, sja1105_dynamic_config_wait_complete() returns either 0 or -ETIMEDOUT, because it just looks at the read_poll_timeout() return code. There will be future changes which move some more checks to sja1105_dynamic_config_poll_valid(). It is important that we propagate their exact return code (-ENOENT, -EINVAL), because callers of sja1105_dynamic_config_read() depend on them. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-09-11net: dsa: sja1105: hide all multicast addresses from "bridge fdb show"Vladimir Oltean1-5/+6
Commit 4d9423549501 ("net: dsa: sja1105: offload bridge port flags to device") has partially hidden some multicast entries from showing up in the "bridge fdb show" output, but it wasn't enough. Addresses which are added through "bridge mdb add" still show up. Hide them all. Fixes: 291d1e72b756 ("net: dsa: sja1105: Add support for FDB and MDB management") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-09-07net: phy: Provide Module 4 KSZ9477 errata (DS80000754C)Lukasz Majewski1-1/+15
The KSZ9477 errata points out (in 'Module 4') the link up/down problems when EEE (Energy Efficient Ethernet) is enabled in the device to which the KSZ9477 tries to auto negotiate. The suggested workaround is to clear advertisement of EEE for PHYs in this chip driver. To avoid regressions with other switch ICs the new MICREL_NO_EEE flag has been introduced. Moreover, the in-register disablement of MMD_DEVICE_ID_EEE_ADV.MMD_EEE_ADV MMD register is removed, as this code is both; now executed too late (after previous rework of the PHY and DSA for KSZ switches) and not required as setting all members of eee_broken_modes bit field prevents the KSZ9477 from advertising EEE. Fixes: 69d3b36ca045 ("net: dsa: microchip: enable EEE support") # for KSZ9477 Signed-off-by: Lukasz Majewski <lukma@denx.de> Tested-by: Oleksij Rempel <o.rempel@pengutronix.de> # Confirmed disabled EEE with oscilloscope. Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20230905093315.784052-1-lukma@denx.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-09-06net: dsa: sja1105: complete tc-cbs offload support on SJA1110Vladimir Oltean3-0/+19
The blamed commit left this delta behind: struct sja1105_cbs_entry { - u64 port; - u64 prio; + u64 port; /* Not used for SJA1110 */ + u64 prio; /* Not used for SJA1110 */ u64 credit_hi; u64 credit_lo; u64 send_slope; u64 idle_slope; }; but did not actually implement tc-cbs offload fully for the new switch. The offload is accepted, but it doesn't work. The difference compared to earlier switch generations is that now, the table of CBS shapers is sparse, because there are many more shapers, so the mapping between a {port, prio} and a table index is static, rather than requiring us to store the port and prio into the sja1105_cbs_entry. So, the problem is that the code programs the CBS shaper parameters at a dynamic table index which is incorrect. All that needs to be done for SJA1110 CBS shapers to work is to bypass the logic which allocates shapers in a dense manner, as for SJA1105, and use the fixed mapping instead. Fixes: 3e77e59bf8cf ("net: dsa: sja1105: add support for the SJA1110 switch family") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-09-06net: dsa: sja1105: fix -ENOSPC when replacing the same tc-cbs too many timesVladimir Oltean1-3/+20
After running command [2] too many times in a row: [1] $ tc qdisc add dev sw2p0 root handle 1: mqprio num_tc 8 \ map 0 1 2 3 4 5 6 7 queues 1@0 1@1 1@2 1@3 1@4 1@5 1@6 1@7 hw 0 [2] $ tc qdisc replace dev sw2p0 parent 1:1 cbs offload 1 \ idleslope 120000 sendslope -880000 locredit -1320 hicredit 180 (aka more than priv->info->num_cbs_shapers times) we start seeing the following error message: Error: Specified device failed to setup cbs hardware offload. This comes from the fact that ndo_setup_tc(TC_SETUP_QDISC_CBS) presents the same API for the qdisc create and replace cases, and the sja1105 driver fails to distinguish between the 2. Thus, it always thinks that it must allocate the same shaper for a {port, queue} pair, when it may instead have to replace an existing one. Fixes: 4d7525085a9b ("net: dsa: sja1105: offload the Credit-Based Shaper qdisc") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-09-06net: dsa: sja1105: fix bandwidth discrepancy between tc-cbs software and offloadVladimir Oltean1-3/+12
More careful measurement of the tc-cbs bandwidth shows that the stream bandwidth (effectively idleslope) increases, there is a larger and larger discrepancy between the rate limit obtained by the software Qdisc, and the rate limit obtained by its offloaded counterpart. The discrepancy becomes so large, that e.g. at an idleslope of 40000 (40Mbps), the offloaded cbs does not actually rate limit anything, and traffic will pass at line rate through a 100 Mbps port. The reason for the discrepancy is that the hardware documentation I've been following is incorrect. UM11040.pdf (for SJA1105P/Q/R/S) states about IDLE_SLOPE that it is "the rate (in unit of bytes/sec) at which the credit counter is increased". Cross-checking with UM10944.pdf (for SJA1105E/T) and UM11107.pdf (for SJA1110), the wording is different: "This field specifies the value, in bytes per second times link speed, by which the credit counter is increased". So there's an extra scaling for link speed that the driver is currently not accounting for, and apparently (empirically), that link speed is expressed in Kbps. I've pondered whether to pollute the sja1105_mac_link_up() implementation with CBS shaper reprogramming, but I don't think it is worth it. IMO, the UAPI exposed by tc-cbs requires user space to recalculate the sendslope anyway, since the formula for that depends on port_transmit_rate (see man tc-cbs), which is not an invariant from tc's perspective. So we use the offload->sendslope and offload->idleslope to deduce the original port_transmit_rate from the CBS formula, and use that value to scale the offload->sendslope and offload->idleslope to values that the hardware understands. Some numerical data points: 40Mbps stream, max interfering frame size 1500, port speed 100M --------------------------------------------------------------- tc-cbs parameters: idleslope 40000 sendslope -60000 locredit -900 hicredit 600 which result in hardware values: Before (doesn't work) After (works) credit_hi 600 600 credit_lo 900 900 send_slope 7500000 75 idle_slope 5000000 50 40Mbps stream, max interfering frame size 1500, port speed 1G ------------------------------------------------------------- tc-cbs parameters: idleslope 40000 sendslope -960000 locredit -1440 hicredit 60 which result in hardware values: Before (doesn't work) After (works) credit_hi 60 60 credit_lo 1440 1440 send_slope 120000000 120 idle_slope 5000000 5 5.12Mbps stream, max interfering frame size 1522, port speed 100M ----------------------------------------------------------------- tc-cbs parameters: idleslope 5120 sendslope -94880 locredit -1444 hicredit 77 which result in hardware values: Before (doesn't work) After (works) credit_hi 77 77 credit_lo 1444 1444 send_slope 11860000 118 idle_slope 640000 6 Tested on SJA1105T, SJA1105S and SJA1110A, at 1Gbps and 100Mbps. Fixes: 4d7525085a9b ("net: dsa: sja1105: offload the Credit-Based Shaper qdisc") Reported-by: Yanan Yang <yanan.yang@nxp.com> Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-08-24net: dsa: use capital "OR" for multiple licenses in SPDXKrzysztof Kozlowski4-4/+4
Documentation/process/license-rules.rst and checkpatch expect the SPDX identifier syntax for multiple licenses to use capital "OR". Correct it to keep consistent format and avoid copy-paste issues. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de> Reviewed-by: FLorian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20230823085632.116725-1-krzysztof.kozlowski@linaro.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-24Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski3-0/+9
Cross-merge networking fixes after downstream PR. Conflicts: include/net/inet_sock.h f866fbc842de ("ipv4: fix data-races around inet->inet_id") c274af224269 ("inet: introduce inet->inet_flags") https://lore.kernel.org/all/679ddff6-db6e-4ff6-b177-574e90d0103d@tessares.net/ Adjacent changes: drivers/net/bonding/bond_alb.c e74216b8def3 ("bonding: fix macvlan over alb bond support") f11e5bd159b0 ("bonding: support balance-alb with openvswitch") drivers/net/ethernet/broadcom/bgmac.c d6499f0b7c7c ("net: bgmac: Return PTR_ERR() for fixed_phy_register()") 23a14488ea58 ("net: bgmac: Fix return value check for fixed_phy_register()") drivers/net/ethernet/broadcom/genet/bcmmii.c 32bbe64a1386 ("net: bcmgenet: Fix return value check for fixed_phy_register()") acf50d1adbf4 ("net: bcmgenet: Return PTR_ERR() for fixed_phy_register()") net/sctp/socket.c f866fbc842de ("ipv4: fix data-races around inet->inet_id") b09bde5c3554 ("inet: move inet->mc_loop to inet->inet_frags") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-23net: dsa: rzn1-a5psw: remove redundant logsAlexis Lothoré1-6/+0
Remove debug logs in port vlan management, since there are already multiple tracepoints defined for those operations in DSA Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-08-22net: dsa: microchip: Remove unused declarationsYue Haibing2-4/+0
Commit 91a98917a883 ("net: dsa: microchip: move switch chip_id detection to ksz_common") removed ksz8_switch_detect() but not its declaration. Commit 6ec23aaaac43 ("net: dsa: microchip: move ksz_dev_ops to ksz_common.c") declared but never implemented other functions. Signed-off-by: Yue Haibing <yuehaibing@huawei.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Link: https://lore.kernel.org/r/20230821125501.19624-1-yuehaibing@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-20net: dsa: realtek: add phylink_get_caps implementationRussell King (Oracle)1-0/+28
The user ports use RSGMII, but we don't have that, and DT doesn't specify a phy interface mode, so phylib defaults to GMII. These support 1G, 100M and 10M with flow control. It is unknown whether asymetric pause is supported at all speeds. The CPU port uses MII/GMII/RGMII/REVMII by hardware pin strapping, and support speeds specific to each, with full duplex only supported in some modes. Flow control may be supported again by hardware pin strapping, and theoretically is readable through a register but no information is given in the datasheet for that. So, we do a best efforts - and be lenient. Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-08-19net: dsa: mt7530: fix handling of 802.1X PAE framesArınç ÜNAL2-0/+6
802.1X PAE frames are link-local frames, therefore they must be trapped to the CPU port. Currently, the MT753X switches treat 802.1X PAE frames as regular multicast frames, therefore flooding them to user ports. To fix this, set 802.1X PAE frames to be trapped to the CPU port(s). Fixes: b8f126a8d543 ("net-next: dsa: add dsa support for Mediatek MT7530 switch") Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-08-19net: dsa: felix: fix oversize frame dropping for always closed tc-taprio gatesVladimir Oltean1-0/+3
The blamed commit resolved a bug where frames would still get stuck at egress, even though they're smaller than the maxSDU[tc], because the driver did not take into account the extra 33 ns that the queue system needs for scheduling the frame. It now takes that into account, but the arithmetic that we perform in vsc9959_tas_remaining_gate_len_ps() is buggy, because we operate on 64-bit unsigned integers, so gate_len_ns - VSC9959_TAS_MIN_GATE_LEN_NS may become a very large integer if gate_len_ns < 33 ns. In practice, this means that we've introduced a regression where all traffic class gates which are permanently closed will not get detected by the driver, and we won't enable oversize frame dropping for them. Before: mscc_felix 0000:00:00.5: port 0: max frame size 1526 needs 12400000 ps, 1152000 ps for mPackets at speed 1000 mscc_felix 0000:00:00.5: port 0 tc 0 min gate len 1000000, sending all frames mscc_felix 0000:00:00.5: port 0 tc 1 min gate len 0, sending all frames mscc_felix 0000:00:00.5: port 0 tc 2 min gate len 0, sending all frames mscc_felix 0000:00:00.5: port 0 tc 3 min gate len 0, sending all frames mscc_felix 0000:00:00.5: port 0 tc 4 min gate len 0, sending all frames mscc_felix 0000:00:00.5: port 0 tc 5 min gate len 0, sending all frames mscc_felix 0000:00:00.5: port 0 tc 6 min gate len 0, sending all frames mscc_felix 0000:00:00.5: port 0 tc 7 min gate length 5120 ns not enough for max frame size 1526 at 1000 Mbps, dropping frames over 615 octets including FCS After: mscc_felix 0000:00:00.5: port 0: max frame size 1526 needs 12400000 ps, 1152000 ps for mPackets at speed 1000 mscc_felix 0000:00:00.5: port 0 tc 0 min gate len 1000000, sending all frames mscc_felix 0000:00:00.5: port 0 tc 1 min gate length 0 ns not enough for max frame size 1526 at 1000 Mbps, dropping frames over 1 octets including FCS mscc_felix 0000:00:00.5: port 0 tc 2 min gate length 0 ns not enough for max frame size 1526 at 1000 Mbps, dropping frames over 1 octets including FCS mscc_felix 0000:00:00.5: port 0 tc 3 min gate length 0 ns not enough for max frame size 1526 at 1000 Mbps, dropping frames over 1 octets including FCS mscc_felix 0000:00:00.5: port 0 tc 4 min gate length 0 ns not enough for max frame size 1526 at 1000 Mbps, dropping frames over 1 octets including FCS mscc_felix 0000:00:00.5: port 0 tc 5 min gate length 0 ns not enough for max frame size 1526 at 1000 Mbps, dropping frames over 1 octets including FCS mscc_felix 0000:00:00.5: port 0 tc 6 min gate length 0 ns not enough for max frame size 1526 at 1000 Mbps, dropping frames over 1 octets including FCS mscc_felix 0000:00:00.5: port 0 tc 7 min gate length 5120 ns not enough for max frame size 1526 at 1000 Mbps, dropping frames over 615 octets including FCS Fixes: 11afdc6526de ("net: dsa: felix: tc-taprio intervals smaller than MTU should send at least one packet") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20230817120111.3522827-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-18Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-0/+8
Cross-merge networking fixes after downstream PR. Conflicts: drivers/net/ethernet/sfc/tc.c fa165e194997 ("sfc: don't unregister flow_indr if it was never registered") 3bf969e88ada ("sfc: add MAE table machinery for conntrack table") https://lore.kernel.org/all/20230818112159.7430e9b4@canb.auug.org.au/ No adjacent changes. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-17net: dsa: mv88e6xxx: Wait for EEPROM done before HW resetAlfred Lee1-0/+8
If the switch is reset during active EEPROM transactions, as in just after an SoC reset after power up, the I2C bus transaction may be cut short leaving the EEPROM internal I2C state machine in the wrong state. When the switch is reset again, the bad state machine state may result in data being read from the wrong memory location causing the switch to enter unexpected mode rendering it inoperational. Fixes: a3dcb3e7e70c ("net: dsa: mv88e6xxx: Wait for EEPROM done after HW reset") Signed-off-by: Alfred Lee <l00g33k@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20230815001323.24739-1-l00g33k@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-16net: dsa: rzn1-a5psw: Remove redundant of_match_ptr()Ruan Jinjie1-1/+1
The driver depends on CONFIG_OF, it is not necessary to use of_match_ptr() here. Signed-off-by: Ruan Jinjie <ruanjinjie@huawei.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-08-16net: dsa: realtek: Remove redundant of_match_ptr()Ruan Jinjie2-2/+2
The driver depends on CONFIG_OF, it is not necessary to use of_match_ptr() here. Signed-off-by: Ruan Jinjie <ruanjinjie@huawei.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-08-15net: dsa: mv88e6060: add phylink_get_caps implementationRussell King (Oracle)1-0/+45
Add a phylink_get_caps implementation for Marvell 88e6060 DSA switch. This is a fast ethernet switch, with internal PHYs for ports 0 through 4. Port 4 also supports MII, REVMII, REVRMII and SNI. Port 5 supports MII, REVMII, REVRMII and SNI without an internal PHY. Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Link: https://lore.kernel.org/r/E1qUkx7-003dMX-9b@rmk-PC.armlinux.org.uk Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-11net: dsa: rzn1-a5psw: add vlan supportClément Léger2-3/+171
Add support for vlan operation (add, del, filtering) on the RZN1 driver. The a5psw switch supports up to 32 VLAN IDs with filtering, tagged/untagged VLANs and PVID for each ports. Signed-off-by: Clément Léger <clement.leger@bootlin.com> Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-08-11net: dsa: rzn1-a5psw: add support for .port_bridge_flagsClément Léger1-2/+58
When running vlan test (bridge_vlan_aware/unaware.sh), there were some failure due to the lack .port_bridge_flag function to disable port flooding. Implement this operation for BR_LEARNING, BR_FLOOD, BR_MCAST_FLOOD and BR_BCAST_FLOOD. Since .port_bridge_flags affects the bits disabling learning for a port, ensure that any other modification on the same register done by a5psw_port_stp_state_set is in sync by using the port learning state to enable/disable learning on the port. Signed-off-by: Clément Léger <clement.leger@bootlin.com> Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-08-11net: dsa: rzn1-a5psw: use a5psw_reg_rmw() to modify flooding resolutionClément Léger1-6/+8
.port_bridge_flags will be added and allows to modify the flood mask independently for each port. Keeping the existing bridged_ports write in a5psw_flooding_set_resolution() would potentially messed up this. Use a read-modify-write to set that value and move bridged_ports handling in bridge_port_join/leave. Signed-off-by: Clément Léger <clement.leger@bootlin.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Alexis Lothoré <alexis.lothore@bootlin.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-08-11Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-0/+2
Cross-merge networking fixes after downstream PR. No conflicts. Adjacent changes: drivers/net/ethernet/intel/igc/igc_main.c 06b412589eef ("igc: Add lock to safeguard global Qbv variables") d3750076d464 ("igc: Add TransmissionOverrun counter") drivers/net/ethernet/microsoft/mana/mana_en.c a7dfeda6fdec ("net: mana: Fix MANA VF unload when hardware is unresponsive") a9ca9f9ceff3 ("page_pool: split types and declarations from page_pool.h") 92272ec4107e ("eth: add missing xdp.h includes in drivers") net/mptcp/protocol.h 511b90e39250 ("mptcp: fix disconnect vs accept race") b8dc6d6ce931 ("mptcp: fix rcv buffer auto-tuning") tools/testing/selftests/net/mptcp/mptcp_join.sh c8c101ae390a ("selftests: mptcp: join: fix 'implicit EP' test") 03668c65d153 ("selftests: mptcp: join: rework detailed report") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-09net: dsa: mt7530: improve and relax PHY driver dependencyDaniel Golle1-1/+2
Different MT7530 variants require different PHY drivers. Use 'imply' instead of 'select' to relax the dependency on the PHY driver, and choose the appropriate driver. Signed-off-by: Daniel Golle <daniel@makrotopia.org> Reviewed-by: Simon Horman <horms@kernel.org> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-08-05net: dsa: ocelot: call dsa_tag_8021q_unregister() under rtnl_lock() on ↵Vladimir Oltean1-0/+2
driver remove When the tagging protocol in current use is "ocelot-8021q" and we unbind the driver, we see this splat: $ echo '0000:00:00.2' > /sys/bus/pci/drivers/fsl_enetc/unbind mscc_felix 0000:00:00.5 swp0: left promiscuous mode sja1105 spi2.0: Link is Down DSA: tree 1 torn down mscc_felix 0000:00:00.5 swp2: left promiscuous mode sja1105 spi2.2: Link is Down DSA: tree 3 torn down fsl_enetc 0000:00:00.2 eno2: left promiscuous mode mscc_felix 0000:00:00.5: Link is Down ------------[ cut here ]------------ RTNL: assertion failed at net/dsa/tag_8021q.c (409) WARNING: CPU: 1 PID: 329 at net/dsa/tag_8021q.c:409 dsa_tag_8021q_unregister+0x12c/0x1a0 Modules linked in: CPU: 1 PID: 329 Comm: bash Not tainted 6.5.0-rc3+ #771 pc : dsa_tag_8021q_unregister+0x12c/0x1a0 lr : dsa_tag_8021q_unregister+0x12c/0x1a0 Call trace: dsa_tag_8021q_unregister+0x12c/0x1a0 felix_tag_8021q_teardown+0x130/0x150 felix_teardown+0x3c/0xd8 dsa_tree_teardown_switches+0xbc/0xe0 dsa_unregister_switch+0x168/0x260 felix_pci_remove+0x30/0x60 pci_device_remove+0x4c/0x100 device_release_driver_internal+0x188/0x288 device_links_unbind_consumers+0xfc/0x138 device_release_driver_internal+0xe0/0x288 device_driver_detach+0x24/0x38 unbind_store+0xd8/0x108 drv_attr_store+0x30/0x50 ---[ end trace 0000000000000000 ]--- ------------[ cut here ]------------ RTNL: assertion failed at net/8021q/vlan_core.c (376) WARNING: CPU: 1 PID: 329 at net/8021q/vlan_core.c:376 vlan_vid_del+0x1b8/0x1f0 CPU: 1 PID: 329 Comm: bash Tainted: G W 6.5.0-rc3+ #771 pc : vlan_vid_del+0x1b8/0x1f0 lr : vlan_vid_del+0x1b8/0x1f0 dsa_tag_8021q_unregister+0x8c/0x1a0 felix_tag_8021q_teardown+0x130/0x150 felix_teardown+0x3c/0xd8 dsa_tree_teardown_switches+0xbc/0xe0 dsa_unregister_switch+0x168/0x260 felix_pci_remove+0x30/0x60 pci_device_remove+0x4c/0x100 device_release_driver_internal+0x188/0x288 device_links_unbind_consumers+0xfc/0x138 device_release_driver_internal+0xe0/0x288 device_driver_detach+0x24/0x38 unbind_store+0xd8/0x108 drv_attr_store+0x30/0x50 DSA: tree 0 torn down This was somewhat not so easy to spot, because "ocelot-8021q" is not the default tagging protocol, and thus, not everyone who tests the unbinding path may have switched to it beforehand. The default felix_tag_npi_teardown() does not require rtnl_lock() to be held. Fixes: 7c83a7c539ab ("net: dsa: add a second tagger for Ocelot switches based on tag_8021q") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Link: https://lore.kernel.org/r/20230803134253.2711124-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-04Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski2-22/+21
Cross-merge networking fixes after downstream PR. Conflicts: net/dsa/port.c 9945c1fb03a3 ("net: dsa: fix older DSA drivers using phylink") a88dd7538461 ("net: dsa: remove legacy_pre_march2020 detection") https://lore.kernel.org/all/20230731102254.2c9868ca@canb.auug.org.au/ net/xdp/xsk.c 3c5b4d69c358 ("net: annotate data-races around sk->sk_mark") b7f72a30e9ac ("xsk: introduce wrappers and helpers for supporting multi-buffer in Tx path") https://lore.kernel.org/all/20230731102631.39988412@canb.auug.org.au/ drivers/net/ethernet/broadcom/bnxt/bnxt.c 37b61cda9c16 ("bnxt: don't handle XDP in netpoll") 2b56b3d99241 ("eth: bnxt: handle invalid Tx completions more gracefully") https://lore.kernel.org/all/20230801101708.1dc7faac@canb.auug.org.au/ Adjacent changes: drivers/net/ethernet/mellanox/mlx5/core/en_accel/ipsec_fs.c 62da08331f1a ("net/mlx5e: Set proper IPsec source port in L4 selector") fbd517549c32 ("net/mlx5e: Add function to get IPsec offload namespace") drivers/net/ethernet/sfc/selftest.c 55c1528f9b97 ("sfc: fix field-spanning memcpy in selftest") ae9d445cd41f ("sfc: Miscellaneous comment removals") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-02net: dsa: hellcreek: Replace bogus commentKurt Kanzenbach1-8/+1
Replace bogus comment about matching the latched timestamp to one of the received frames. That comment is probably copied from mv88e6xxx and true for these switches. However, the hellcreek switch is configured to insert the timestamp directly into the PTP packets. While here, remove the other comments regarding the list splicing and locking as well, because it doesn't add any value. Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Link: https://lore.kernel.org/r/20230801131647.84697-1-kurt@linutronix.de Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-08-02net: dsa: mv88e6xxx: Add erratum 3.14 for 88E6390X and 88E6190XAnte Knezic1-0/+45
Fixes XAUI/RXAUI lane alignment errors. Issue causes dropped packets when trying to communicate over fiber via SERDES lanes of port 9 and 10. Errata document applies only to 88E6190X and 88E6390X devices. Requires poking in undocumented registers. Signed-off-by: Ante Knezic <ante.knezic@helmholz.de> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-08-01net: dsa: qca8k: use dsa_for_each macro instead of for loopChristian Marangi1-53/+54
Convert for loop to dsa_for_each macro to save some redundant write on unconnected/unused port and tidy things up. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20230730074113.21889-5-ansuelsmth@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-08-01net: dsa: qca8k: move qca8xxx hol fixup to separate functionChristian Marangi1-36/+42
Move qca8xxx hol fixup to separate function to tidy things up and to permit using a more efficent loop in future patch. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20230730074113.21889-4-ansuelsmth@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-08-01net: dsa: qca8k: limit user ports access to the first CPU port on setupChristian Marangi1-8/+6
In preparation for multi-CPU support, set CPU port LOOKUP MEMBER outside the port loop and setup the LOOKUP MEMBER mask for user ports only to the first CPU port. This is to handle flooding condition where every CPU port is set as target and prevent packet duplication for unknown frames from user ports. Secondary CPU port LOOKUP MEMBER mask will be setup later when port_change_master will be implemented. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Link: https://lore.kernel.org/r/20230730074113.21889-3-ansuelsmth@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-08-01net: dsa: qca8k: make learning configurable and keep off if standaloneChristian Marangi3-3/+58
Address learning should initially be turned off by the driver for port operation in standalone mode, then the DSA core handles changes to it via ds->ops->port_bridge_flags(). Currently this is not the case for qca8k where learning is enabled unconditionally in qca8k_setup for every user port. Handle ports configured in standalone mode by making the learning configurable and not enabling it by default. Implement .port_pre_bridge_flags and .port_bridge_flags dsa ops to enable learning for bridge that request it and tweak .port_stp_state_set to correctly disable learning when port is configured in standalone mode. Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20230730074113.21889-2-ansuelsmth@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2023-07-31net: flow_dissector: Use 64bits for used_keysRatheesh Kannoth2-8/+8
As 32bits of dissector->used_keys are exhausted, increase the size to 64bits. This is base change for ESP/AH flow dissector patch. Please find patch and discussions at https://lore.kernel.org/netdev/ZMDNjD46BvZ5zp5I@corigine.com/T/#t Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com> Reviewed-by: Petr Machata <petrm@nvidia.com> # for mlxsw Tested-by: Petr Machata <petrm@nvidia.com> Reviewed-by: Martin Habets <habetsm.xilinx@gmail.com> Reviewed-by: Simon Horman <simon.horman@corigine.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-07-29net: dsa: microchip: KSZ9477 register regmap alignment to 32 bit boundariesLukasz Majewski1-20/+15
The commit (SHA1: 5c844d57aa7894154e49cf2fc648bfe2f1aefc1c) provided code to apply "Module 6: Certain PHY registers must be written as pairs instead of singly" errata for KSZ9477 as this chip for certain PHY registers (0xN120 to 0xN13F, N=1,2,3,4,5) must be accesses as 32 bit words instead of 16 or 8 bit access. Otherwise, adjacent registers (no matter if reserved or not) are overwritten with 0x0. Without this patch some registers (e.g. 0x113c or 0x1134) required for 32 bit access are out of valid regmap ranges. As a result, following error is observed and KSZ9477 is not properly configured: ksz-switch spi1.0: can't rmw 32bit reg 0x113c: -EIO ksz-switch spi1.0: can't rmw 32bit reg 0x1134: -EIO ksz-switch spi1.0 lan1 (uninitialized): failed to connect to PHY: -EIO ksz-switch spi1.0 lan1 (uninitialized): error -5 setting up PHY for tree 0, switch 0, port 0 The solution is to modify regmap_reg_range to allow accesses with 4 bytes boundaries. Signed-off-by: Lukasz Majewski <lukma@denx.de> Reviewed-by: Simon Horman <horms@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2023-07-28net: dsa: fix value check in bcm_sf2_sw_probe()Yuanjun Gong1-2/+6
in bcm_sf2_sw_probe(), check the return value of clk_prepare_enable() and return the error code if clk_prepare_enable() returns an unexpected value. Fixes: e9ec5c3bd238 ("net: dsa: bcm_sf2: request and handle clocks") Signed-off-by: Yuanjun Gong <ruc_gongyuanjun@163.com> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20230726170506.16547-1-ruc_gongyuanjun@163.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-07-28Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski2-5/+21
Cross-merge networking fixes after downstream PR. No conflicts or adjacent changes. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-07-27net: dsa: Explicitly include correct DT includesRob Herring17-10/+17
The DT of_device.h and of_platform.h date back to the separate of_platform_bus_type before it as merged into the regular platform bus. As part of that merge prepping Arm DT support 13 years ago, they "temporarily" include each other. They also include platform_device.h and of.h. As a result, there's a pretty much random mix of those include files used throughout the tree. In order to detangle these headers and replace the implicit includes with struct declarations, users need to explicitly include the correct includes. Signed-off-by: Rob Herring <robh@kernel.org> Reviewed-by: Simon Horman <simon.horman@corigine.com> Reviewed-by: Vladimir Oltean <olteanv@gmail.com> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20230724211859.805481-1-robh@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2023-07-26net: dsa: qca8k: fix mdb add/del case with 0 VIDChristian Marangi1-0/+6
The qca8k switch doesn't support using 0 as VID and require a default VID to be always set. MDB add/del function doesn't currently handle this and are currently setting the default VID. Fix this by correctly handling this corner case and internally use the default VID for VID 0 case. Fixes: ba8f870dfa63 ("net: dsa: qca8k: add support for mdb_add/del") Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2023-07-26net: dsa: qca8k: fix broken search_and_delChristian Marangi1-0/+4
On deleting an MDB entry for a port, fdb_search_and_del is used. An FDB entry can't be modified so it needs to be deleted and readded again with the new portmap (and the port deleted as requested) We use the SEARCH operator to search the entry to edit by vid and mac address and then we check the aging if we actually found an entry. Currently the code suffer from a bug where the searched fdb entry is never read again with the found values (if found) resulting in the code always returning -EINVAL as aging was always 0. Fix this by correctly read the fdb entry after it was searched. Fixes: ba8f870dfa63 ("net: dsa: qca8k: add support for mdb_add/del") Signed-off-by: Christian Marangi <ansuelsmth@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-26 20:34:27 +0300