summaryrefslogtreecommitdiff
path: root/drivers/net/bonding
AgeCommit message (Collapse)AuthorFilesLines
2022-10-27bond: Disable TLS features indicationTariq Toukan2-30/+1
Bond agnostically interacts with TLS device-offload requests via the .ndo_sk_get_lower_dev operation. Return value is true iff bond guarantees fixed mapping between the TLS connection and a lower netdev. Due to this nature, the bond TLS device offload features are not explicitly controllable in the bond layer. As of today, these are read-only values based on the evaluation of bond_sk_check(). However, this indication might be incorrect and misleading, when the feature bits are "fixed" by some dependency features. For example, NETIF_F_HW_TLS_TX/RX are forcefully cleared in case the corresponding checksum offload is disabled. But in fact the bond ability to still offload TLS connections to the lower device is not hurt. This means that these bits can not be trusted, and hence better become unused. This patch revives some old discussion [1] and proposes a much simpler solution: Clear the bond's TLS features bits. Everyone should stop reading them. [1] https://lore.kernel.org/netdev/20210526095747.22446-1-tariqt@nvidia.com/ Signed-off-by: Tariq Toukan <tariqt@nvidia.com> Reviewed-by: Gal Pressman <gal@nvidia.com> Acked-by: Jakub Kicinski <kuba@kernel.org> Link: https://lore.kernel.org/r/20221025105300.4718-1-tariqt@nvidia.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-10-24bonding: 3ad: Add support for 800G speedAmit Cohen1-0/+9
Add support for 800Gbps speed to allow using 3ad mode with 800G devices. Signed-off-by: Amit Cohen <amcohen@nvidia.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: Petr Machata <petrm@nvidia.com> Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-10-12treewide: use get_random_u32() when possibleJason A. Donenfeld1-1/+1
The prandom_u32() function has been a deprecated inline wrapper around get_random_u32() for several releases now, and compiles down to the exact same code. Replace the deprecated wrapper with a direct call to the real function. The same also applies to get_random_int(), which is just a wrapper around get_random_u32(). This was done as a basic find and replace. Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Yury Norov <yury.norov@gmail.com> Reviewed-by: Jan Kara <jack@suse.cz> # for ext4 Acked-by: Toke Høiland-Jørgensen <toke@toke.dk> # for sch_cake Acked-by: Chuck Lever <chuck.lever@oracle.com> # for nfsd Acked-by: Jakub Kicinski <kuba@kernel.org> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> # for thunderbolt Acked-by: Darrick J. Wong <djwong@kernel.org> # for xfs Acked-by: Helge Deller <deller@gmx.de> # for parisc Acked-by: Heiko Carstens <hca@linux.ibm.com> # for s390 Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
2022-09-30net: bonding: Convert to use sysfs_emit()/sysfs_emit_at() APIsWang Yufen2-67/+67
Follow the advice of the Documentation/filesystems/sysfs.rst and show() should only use sysfs_emit() or sysfs_emit_at() when formatting the value to be returned to user space. Signed-off-by: Wang Yufen <wangyufen@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-22Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski2-32/+45
drivers/net/ethernet/freescale/fec.h 7b15515fc1ca ("Revert "fec: Restart PPS after link state change"") 40c79ce13b03 ("net: fec: add stop mode support for imx8 platform") https://lore.kernel.org/all/20220921105337.62b41047@canb.auug.org.au/ drivers/pinctrl/pinctrl-ocelot.c c297561bc98a ("pinctrl: ocelot: Fix interrupt controller") 181f604b33cd ("pinctrl: ocelot: add ability to be used in a non-mmio configuration") https://lore.kernel.org/all/20220921110032.7cd28114@canb.auug.org.au/ tools/testing/selftests/drivers/net/bonding/Makefile bbb774d921e2 ("net: Add tests for bonding and team address list management") 152e8ec77640 ("selftests/bonding: add a test for bonding lladdr target") https://lore.kernel.org/all/20220921110437.5b7dbd82@canb.auug.org.au/ drivers/net/can/usb/gs_usb.c 5440428b3da6 ("can: gs_usb: gs_can_open(): fix race dev->can.state condition") 45dfa45f52e6 ("can: gs_usb: add RX and TX hardware timestamp support") https://lore.kernel.org/all/84f45a7d-92b6-4dc5-d7a1-072152fab6ff@tessares.net/ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-22bonding: fix NULL deref in bond_rr_gen_slave_idJonathan Toppins1-9/+6
Fix a NULL dereference of the struct bonding.rr_tx_counter member because if a bond is initially created with an initial mode != zero (Round Robin) the memory required for the counter is never created and when the mode is changed there is never any attempt to verify the memory is allocated upon switching modes. This causes the following Oops on an aarch64 machine: [ 334.686773] Unable to handle kernel paging request at virtual address ffff2c91ac905000 [ 334.694703] Mem abort info: [ 334.697486] ESR = 0x0000000096000004 [ 334.701234] EC = 0x25: DABT (current EL), IL = 32 bits [ 334.706536] SET = 0, FnV = 0 [ 334.709579] EA = 0, S1PTW = 0 [ 334.712719] FSC = 0x04: level 0 translation fault [ 334.717586] Data abort info: [ 334.720454] ISV = 0, ISS = 0x00000004 [ 334.724288] CM = 0, WnR = 0 [ 334.727244] swapper pgtable: 4k pages, 48-bit VAs, pgdp=000008044d662000 [ 334.733944] [ffff2c91ac905000] pgd=0000000000000000, p4d=0000000000000000 [ 334.740734] Internal error: Oops: 96000004 [#1] SMP [ 334.745602] Modules linked in: bonding tls veth rfkill sunrpc arm_spe_pmu vfat fat acpi_ipmi ipmi_ssif ixgbe igb i40e mdio ipmi_devintf ipmi_msghandler arm_cmn arm_dsu_pmu cppc_cpufreq acpi_tad fuse zram crct10dif_ce ast ghash_ce sbsa_gwdt nvme drm_vram_helper drm_ttm_helper nvme_core ttm xgene_hwmon [ 334.772217] CPU: 7 PID: 2214 Comm: ping Not tainted 6.0.0-rc4-00133-g64ae13ed4784 #4 [ 334.779950] Hardware name: GIGABYTE R272-P31-00/MP32-AR1-00, BIOS F18v (SCP: 1.08.20211002) 12/01/2021 [ 334.789244] pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 334.796196] pc : bond_rr_gen_slave_id+0x40/0x124 [bonding] [ 334.801691] lr : bond_xmit_roundrobin_slave_get+0x38/0xdc [bonding] [ 334.807962] sp : ffff8000221733e0 [ 334.811265] x29: ffff8000221733e0 x28: ffffdbac8572d198 x27: ffff80002217357c [ 334.818392] x26: 000000000000002a x25: ffffdbacb33ee000 x24: ffff07ff980fa000 [ 334.825519] x23: ffffdbacb2e398ba x22: ffff07ff98102000 x21: ffff07ff981029c0 [ 334.832646] x20: 0000000000000001 x19: ffff07ff981029c0 x18: 0000000000000014 [ 334.839773] x17: 0000000000000000 x16: ffffdbacb1004364 x15: 0000aaaabe2f5a62 [ 334.846899] x14: ffff07ff8e55d968 x13: ffff07ff8e55db30 x12: 0000000000000000 [ 334.854026] x11: ffffdbacb21532e8 x10: 0000000000000001 x9 : ffffdbac857178ec [ 334.861153] x8 : ffff07ff9f6e5a28 x7 : 0000000000000000 x6 : 000000007c2b3742 [ 334.868279] x5 : ffff2c91ac905000 x4 : ffff2c91ac905000 x3 : ffff07ff9f554400 [ 334.875406] x2 : ffff2c91ac905000 x1 : 0000000000000001 x0 : ffff07ff981029c0 [ 334.882532] Call trace: [ 334.884967] bond_rr_gen_slave_id+0x40/0x124 [bonding] [ 334.890109] bond_xmit_roundrobin_slave_get+0x38/0xdc [bonding] [ 334.896033] __bond_start_xmit+0x128/0x3a0 [bonding] [ 334.901001] bond_start_xmit+0x54/0xb0 [bonding] [ 334.905622] dev_hard_start_xmit+0xb4/0x220 [ 334.909798] __dev_queue_xmit+0x1a0/0x720 [ 334.913799] arp_xmit+0x3c/0xbc [ 334.916932] arp_send_dst+0x98/0xd0 [ 334.920410] arp_solicit+0xe8/0x230 [ 334.923888] neigh_probe+0x60/0xb0 [ 334.927279] __neigh_event_send+0x3b0/0x470 [ 334.931453] neigh_resolve_output+0x70/0x90 [ 334.935626] ip_finish_output2+0x158/0x514 [ 334.939714] __ip_finish_output+0xac/0x1a4 [ 334.943800] ip_finish_output+0x40/0xfc [ 334.947626] ip_output+0xf8/0x1a4 [ 334.950931] ip_send_skb+0x5c/0x100 [ 334.954410] ip_push_pending_frames+0x3c/0x60 [ 334.958758] raw_sendmsg+0x458/0x6d0 [ 334.962325] inet_sendmsg+0x50/0x80 [ 334.965805] sock_sendmsg+0x60/0x6c [ 334.969286] __sys_sendto+0xc8/0x134 [ 334.972853] __arm64_sys_sendto+0x34/0x4c [ 334.976854] invoke_syscall+0x78/0x100 [ 334.980594] el0_svc_common.constprop.0+0x4c/0xf4 [ 334.985287] do_el0_svc+0x38/0x4c [ 334.988591] el0_svc+0x34/0x10c [ 334.991724] el0t_64_sync_handler+0x11c/0x150 [ 334.996072] el0t_64_sync+0x190/0x194 [ 334.999726] Code: b9001062 f9403c02 d53cd044 8b040042 (b8210040) [ 335.005810] ---[ end trace 0000000000000000 ]--- [ 335.010416] Kernel panic - not syncing: Oops: Fatal exception in interrupt [ 335.017279] SMP: stopping secondary CPUs [ 335.021374] Kernel Offset: 0x5baca8eb0000 from 0xffff800008000000 [ 335.027456] PHYS_OFFSET: 0x80000000 [ 335.030932] CPU features: 0x0000,0085c029,19805c82 [ 335.035713] Memory Limit: none [ 335.038756] Rebooting in 180 seconds.. The fix is to allocate the memory in bond_open() which is guaranteed to be called before any packets are processed. Fixes: 848ca9182a7d ("net: bonding: Use per-cpu rr_tx_counter") CC: Jussi Maki <joamaki@gmail.com> Signed-off-by: Jonathan Toppins <jtoppins@redhat.com> Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-16net: bonding: Unsync device addresses on ndo_stopBenjamin Poirier1-12/+35
Netdev drivers are expected to call dev_{uc,mc}_sync() in their ndo_set_rx_mode method and dev_{uc,mc}_unsync() in their ndo_stop method. This is mentioned in the kerneldoc for those dev_* functions. The bonding driver calls dev_{uc,mc}_unsync() during ndo_uninit instead of ndo_stop. This is ineffective because address lists (dev->{uc,mc}) have already been emptied in unregister_netdevice_many() before ndo_uninit is called. This mistake can result in addresses being leftover on former bond slaves after a bond has been deleted; see test_LAG_cleanup() in the last patch in this series. Add unsync calls, via bond_hw_addr_flush(), at their expected location, bond_close(). Add dev_mc_add() call to bond_open() to match the above change. v3: * When adding or deleting a slave, only sync/unsync, add/del addresses if the bond is up. In other cases, it is taken care of at the right time by ndo_open/ndo_set_rx_mode/ndo_stop. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Benjamin Poirier <bpoirier@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-16net: bonding: Share lacpdu_mcast_addr definitionBenjamin Poirier2-14/+7
There are already a few definitions of arrays containing MULTICAST_LACPDU_ADDR and the next patch will add one more use. These all contain the same constant data so define one common instance for all bonding code. Signed-off-by: Benjamin Poirier <bpoirier@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-08Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netPaolo Abeni1-5/+15
drivers/net/ethernet/freescale/fec.h 7d650df99d52 ("net: fec: add pm_qos support on imx6q platform") 40c79ce13b03 ("net: fec: add stop mode support for imx8 platform") Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-09-05bonding: accept unsolicited NA messageHangbin Liu1-5/+12
The unsolicited NA message with all-nodes multicast dest address should be valid, as this also means the link could reach the target. Also rename bond_validate_ns() to bond_validate_na(). Reported-by: LiLiang <liali@redhat.com> Fixes: 5e1eeef69c0f ("bonding: NS target should accept link local address") Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-05bonding: use unspecified address if no available link local addressHangbin Liu1-0/+3
When ns_ip6_target was set, the ipv6_dev_get_saddr() will be called to get available source address and send IPv6 neighbor solicit message. If the target is global address, ipv6_dev_get_saddr() will get any available src address. But if the target is link local address, ipv6_dev_get_saddr() will only get available address from our interface, i.e. the corresponding bond interface. But before bond interface up, all the address is tentative, while ipv6_dev_get_saddr() will ignore tentative address. This makes we can't find available link local src address, then bond_ns_send() will not be called and no NS message was sent. Finally bond interface will keep in down state. Fix this by sending NS with unspecified address if there is no available source address. Reported-by: LiLiang <liali@redhat.com> Fixes: 5e1eeef69c0f ("bonding: NS target should accept link local address") Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-01net: move from strlcpy with unused retval to strscpyWolfram Sang1-1/+1
Follow the advice of the below link and prefer 'strscpy' in this subsystem. Conversion is 1:1 because the return value is not used. Generated by a coccinelle script. Link: https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/ Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> # for CAN Link: https://lore.kernel.org/r/20220830201457.7984-1-wsa+renesas@sang-engineering.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-23bonding: 3ad: make ad_ticks_per_sec a constJonathan Toppins2-9/+4
The value is only ever set once in bond_3ad_initialize and only ever read otherwise. There seems to be no reason to set the variable via bond_3ad_initialize when setting the global variable will do. Change ad_ticks_per_sec to a const to enforce its read-only usage. Signed-off-by: Jonathan Toppins <jtoppins@redhat.com> Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-23bonding: 802.3ad: fix no transmission of LACPDUsJonathan Toppins1-22/+16
This is caused by the global variable ad_ticks_per_sec being zero as demonstrated by the reproducer script discussed below. This causes all timer values in __ad_timer_to_ticks to be zero, resulting in the periodic timer to never fire. To reproduce: Run the script in `tools/testing/selftests/drivers/net/bonding/bond-break-lacpdu-tx.sh` which puts bonding into a state where it never transmits LACPDUs. line 44: ip link add fbond type bond mode 4 miimon 200 \ xmit_hash_policy 1 ad_actor_sys_prio 65535 lacp_rate fast setting bond param: ad_actor_sys_prio given: params.ad_actor_system = 0 call stack: bond_option_ad_actor_sys_prio() -> bond_3ad_update_ad_actor_settings() -> set ad.system.sys_priority = bond->params.ad_actor_sys_prio -> ad.system.sys_mac_addr = bond->dev->dev_addr; because params.ad_actor_system == 0 results: ad.system.sys_mac_addr = bond->dev->dev_addr line 48: ip link set fbond address 52:54:00:3B:7C:A6 setting bond MAC addr call stack: bond->dev->dev_addr = new_mac line 52: ip link set fbond type bond ad_actor_sys_prio 65535 setting bond param: ad_actor_sys_prio given: params.ad_actor_system = 0 call stack: bond_option_ad_actor_sys_prio() -> bond_3ad_update_ad_actor_settings() -> set ad.system.sys_priority = bond->params.ad_actor_sys_prio -> ad.system.sys_mac_addr = bond->dev->dev_addr; because params.ad_actor_system == 0 results: ad.system.sys_mac_addr = bond->dev->dev_addr line 60: ip link set veth1-bond down master fbond given: params.ad_actor_system = 0 params.mode = BOND_MODE_8023AD ad.system.sys_mac_addr == bond->dev->dev_addr call stack: bond_enslave -> bond_3ad_initialize(); because first slave -> if ad.system.sys_mac_addr != bond->dev->dev_addr return results: Nothing is run in bond_3ad_initialize() because dev_addr equals sys_mac_addr leaving the global ad_ticks_per_sec zero as it is never initialized anywhere else. The if check around the contents of bond_3ad_initialize() is no longer needed due to commit 5ee14e6d336f ("bonding: 3ad: apply ad_actor settings changes immediately") which sets ad.system.sys_mac_addr if any one of the bonding parameters whos set function calls bond_3ad_update_ad_actor_settings(). This is because if ad.system.sys_mac_addr is zero it will be set to the current bond mac address, this causes the if check to never be true. Fixes: 5ee14e6d336f ("bonding: 3ad: apply ad_actor settings changes immediately") Signed-off-by: Jonathan Toppins <jtoppins@redhat.com> Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-11bonding: fix reference count leak in balance-alb modeJay Vosburgh1-1/+4
Commit d5410ac7b0ba ("net:bonding:support balance-alb interface with vlan to bridge") introduced a reference count leak by not releasing the reference acquired by ip_dev_find(). Remedy this by insuring the reference is released. Fixes: d5410ac7b0ba ("net:bonding:support balance-alb interface with vlan to bridge") Signed-off-by: Jay Vosburgh <jay.vosburgh@canonical.com> Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org> Link: https://lore.kernel.org/r/26758.1660194413@famine Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-11net/tls: Use RCU API to access tls_ctx->netdevMaxim Mikityanskiy1-2/+8
Currently, tls_device_down synchronizes with tls_device_resync_rx using RCU, however, the pointer to netdev is stored using WRITE_ONCE and loaded using READ_ONCE. Although such approach is technically correct (rcu_dereference is essentially a READ_ONCE, and rcu_assign_pointer uses WRITE_ONCE to store NULL), using special RCU helpers for pointers is more valid, as it includes additional checks and might change the implementation transparently to the callers. Mark the netdev pointer as __rcu and use the correct RCU helpers to access it. For non-concurrent access pass the right conditions that guarantee safe access (locks taken, refcount value). Also use the correct helper in mlx5e, where even READ_ONCE was missing. The transition to RCU exposes existing issues, fixed by this commit: 1. bond_tls_device_xmit could read netdev twice, and it could become NULL the second time, after the NULL check passed. 2. Drivers shouldn't stop processing the last packet if tls_device_down just set netdev to NULL, before tls_dev_del was called. This prevents a possible packet drop when transitioning to the fallback software mode. Fixes: 89df6a810470 ("net/bonding: Implement TLS TX device offload") Fixes: c55dcdd435aa ("net/tls: Fix use-after-free after the TLS device goes down and up") Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com> Link: https://lore.kernel.org/r/20220810081602.1435800-1-maximmi@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-08-10net:bonding:support balance-alb interface with vlan to bridgeSun Shouxin1-0/+7
In my test, balance-alb bonding with two slaves eth0 and eth1, and then Bond0.150 is created with vlan id attached bond0. After adding bond0.150 into one linux bridge, I noted that Bond0, bond0.150 and bridge were assigned to the same MAC as eth0. Once bond0.150 receives a packet whose dest IP is bridge's and dest MAC is eth1's, the linux bridge will not match eth1's MAC entry in FDB, and not handle it as expected. The patch fix the issue, and diagram as below: eth1(mac:eth1_mac)--bond0(balance-alb,mac:eth0_mac)--eth0(mac:eth0_mac) | bond0.150(mac:eth0_mac) | bridge(ip:br_ip, mac:eth0_mac)--other port Suggested-by: Hu Yadi <huyd12@chinatelecom.cn> Signed-off-by: Sun Shouxin <sunshouxin@chinatelecom.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-08-04net: bonding: replace dev_trans_start() with the jiffies of the last ARP/NSVladimir Oltean1-15/+20
The bonding driver piggybacks on time stamps kept by the network stack for the purpose of the netdev TX watchdog, and this is problematic because it does not work with NETIF_F_LLTX devices. It is hard to say why the driver looks at dev_trans_start() of the slave->dev, considering that this is updated even by non-ARP/NS probes sent by us, and even by traffic not sent by us at all (for example PTP on physical slave devices). ARP monitoring in active-backup mode appears to still work even if we track only the last TX time of actual ARP probes. Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-07-01Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski2-2/+3
drivers/net/ethernet/microchip/sparx5/sparx5_switchdev.c 9c5de246c1db ("net: sparx5: mdb add/del handle non-sparx5 devices") fbb89d02e33a ("net: sparx5: Allow mdb entries to both CPU and ports") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-30net: bonding: fix use-after-free after 802.3ad slave unbindYevhen Orlov1-1/+2
commit 0622cab0341c ("bonding: fix 802.3ad aggregator reselection"), resolve case, when there is several aggregation groups in the same bond. bond_3ad_unbind_slave will invalidate (clear) aggregator when __agg_active_ports return zero. So, ad_clear_agg can be executed even, when num_of_ports!=0. Than bond_3ad_unbind_slave can be executed again for, previously cleared aggregator. NOTE: at this time bond_3ad_unbind_slave will not update slave ports list, because lag_ports==NULL. So, here we got slave ports, pointing to freed aggregator memory. Fix with checking actual number of ports in group (as was before commit 0622cab0341c ("bonding: fix 802.3ad aggregator reselection") ), before ad_clear_agg(). The KASAN logs are as follows: [ 767.617392] ================================================================== [ 767.630776] BUG: KASAN: use-after-free in bond_3ad_state_machine_handler+0x13dc/0x1470 [ 767.638764] Read of size 2 at addr ffff00011ba9d430 by task kworker/u8:7/767 [ 767.647361] CPU: 3 PID: 767 Comm: kworker/u8:7 Tainted: G O 5.15.11 #15 [ 767.655329] Hardware name: DNI AmazonGo1 A7040 board (DT) [ 767.660760] Workqueue: lacp_1 bond_3ad_state_machine_handler [ 767.666468] Call trace: [ 767.668930] dump_backtrace+0x0/0x2d0 [ 767.672625] show_stack+0x24/0x30 [ 767.675965] dump_stack_lvl+0x68/0x84 [ 767.679659] print_address_description.constprop.0+0x74/0x2b8 [ 767.685451] kasan_report+0x1f0/0x260 [ 767.689148] __asan_load2+0x94/0xd0 [ 767.692667] bond_3ad_state_machine_handler+0x13dc/0x1470 Fixes: 0622cab0341c ("bonding: fix 802.3ad aggregator reselection") Co-developed-by: Maksym Glubokiy <maksym.glubokiy@plvision.eu> Signed-off-by: Maksym Glubokiy <maksym.glubokiy@plvision.eu> Signed-off-by: Yevhen Orlov <yevhen.orlov@plvision.eu> Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com> Link: https://lore.kernel.org/r/20220629012914.361-1-yevhen.orlov@plvision.eu Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-28net: bonding: fix possible NULL deref in rlb codeEric Dumazet1-1/+1
syzbot has two reports involving the same root cause. bond_alb_initialize() must not set bond->alb_info.rlb_enabled if a memory allocation error is detected. Report 1: general protection fault, probably for non-canonical address 0xdffffc0000000002: 0000 [#1] PREEMPT SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000010-0x0000000000000017] CPU: 0 PID: 12276 Comm: kworker/u4:10 Not tainted 5.19.0-rc3-syzkaller-00132-g3b89b511ea0c #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Workqueue: netns cleanup_net RIP: 0010:rlb_clear_slave+0x10e/0x690 drivers/net/bonding/bond_alb.c:393 Code: 8e fc 83 fb ff 0f 84 74 02 00 00 e8 cc 2a 8e fc 48 8b 44 24 08 89 dd 48 c1 e5 06 4c 8d 34 28 49 8d 7e 14 48 89 f8 48 c1 e8 03 <42> 0f b6 14 20 48 89 f8 83 e0 07 83 c0 03 38 d0 7c 08 84 d2 0f 85 RSP: 0018:ffffc90018a8f678 EFLAGS: 00010203 RAX: 0000000000000002 RBX: 0000000000000000 RCX: 0000000000000000 RDX: ffff88803375bb00 RSI: ffffffff84ec4ac4 RDI: 0000000000000014 RBP: 0000000000000000 R08: 0000000000000005 R09: 00000000ffffffff R10: 0000000000000000 R11: 0000000000000000 R12: dffffc0000000000 R13: ffff8880ac889000 R14: 0000000000000000 R15: ffff88815a668c80 FS: 0000000000000000(0000) GS:ffff8880b9a00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00005597077e10b0 CR3: 0000000026668000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> bond_alb_deinit_slave+0x43c/0x6b0 drivers/net/bonding/bond_alb.c:1663 __bond_release_one.cold+0x383/0xd53 drivers/net/bonding/bond_main.c:2370 bond_slave_netdev_event drivers/net/bonding/bond_main.c:3778 [inline] bond_netdev_event+0x993/0xad0 drivers/net/bonding/bond_main.c:3889 notifier_call_chain+0xb5/0x200 kernel/notifier.c:87 call_netdevice_notifiers_info+0xb5/0x130 net/core/dev.c:1945 call_netdevice_notifiers_extack net/core/dev.c:1983 [inline] call_netdevice_notifiers net/core/dev.c:1997 [inline] unregister_netdevice_many+0x948/0x18b0 net/core/dev.c:10839 default_device_exit_batch+0x449/0x590 net/core/dev.c:11333 ops_exit_list+0x125/0x170 net/core/net_namespace.c:167 cleanup_net+0x4ea/0xb00 net/core/net_namespace.c:594 process_one_work+0x996/0x1610 kernel/workqueue.c:2289 worker_thread+0x665/0x1080 kernel/workqueue.c:2436 kthread+0x2e9/0x3a0 kernel/kthread.c:376 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:302 </TASK> Report 2: general protection fault, probably for non-canonical address 0xdffffc0000000006: 0000 [#1] PREEMPT SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000030-0x0000000000000037] CPU: 1 PID: 5206 Comm: syz-executor.1 Not tainted 5.18.0-syzkaller-12108-g58f9d52ff689 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:rlb_req_update_slave_clients+0x109/0x2f0 drivers/net/bonding/bond_alb.c:502 Code: 5d 18 8f fc 41 80 3e 00 0f 85 a5 01 00 00 89 d8 48 c1 e0 06 49 03 84 24 68 01 00 00 48 8d 78 30 49 89 c7 48 89 fa 48 c1 ea 03 <80> 3c 2a 00 0f 85 98 01 00 00 4d 39 6f 30 75 83 e8 22 18 8f fc 49 RSP: 0018:ffffc9000300ee80 EFLAGS: 00010206 RAX: 0000000000000000 RBX: 0000000000000000 RCX: ffffc90016c11000 RDX: 0000000000000006 RSI: ffffffff84eb6bf3 RDI: 0000000000000030 RBP: dffffc0000000000 R08: 0000000000000005 R09: 00000000ffffffff R10: 0000000000000000 R11: 0000000000000000 R12: ffff888027c80c80 R13: ffff88807d7ff800 R14: ffffed1004f901bd R15: 0000000000000000 FS: 00007f6f46c58700(0000) GS:ffff8880b9b00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020010000 CR3: 00000000516cc000 CR4: 00000000003506e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> alb_fasten_mac_swap+0x886/0xa80 drivers/net/bonding/bond_alb.c:1070 bond_alb_handle_active_change+0x624/0x1050 drivers/net/bonding/bond_alb.c:1765 bond_change_active_slave+0xfa1/0x29b0 drivers/net/bonding/bond_main.c:1173 bond_select_active_slave+0x23f/0xa50 drivers/net/bonding/bond_main.c:1253 bond_enslave+0x3b34/0x53b0 drivers/net/bonding/bond_main.c:2159 do_set_master+0x1c8/0x220 net/core/rtnetlink.c:2577 rtnl_newlink_create net/core/rtnetlink.c:3380 [inline] __rtnl_newlink+0x13ac/0x17e0 net/core/rtnetlink.c:3580 rtnl_newlink+0x64/0xa0 net/core/rtnetlink.c:3593 rtnetlink_rcv_msg+0x43a/0xc90 net/core/rtnetlink.c:6089 netlink_rcv_skb+0x153/0x420 net/netlink/af_netlink.c:2501 netlink_unicast_kernel net/netlink/af_netlink.c:1319 [inline] netlink_unicast+0x543/0x7f0 net/netlink/af_netlink.c:1345 netlink_sendmsg+0x917/0xe10 net/netlink/af_netlink.c:1921 sock_sendmsg_nosec net/socket.c:714 [inline] sock_sendmsg+0xcf/0x120 net/socket.c:734 ____sys_sendmsg+0x6eb/0x810 net/socket.c:2492 ___sys_sendmsg+0xf3/0x170 net/socket.c:2546 __sys_sendmsg net/socket.c:2575 [inline] __do_sys_sendmsg net/socket.c:2584 [inline] __se_sys_sendmsg net/socket.c:2582 [inline] __x64_sys_sendmsg+0x132/0x220 net/socket.c:2582 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x46/0xb0 RIP: 0033:0x7f6f45a89109 Code: ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f6f46c58168 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 00007f6f45b9c030 RCX: 00007f6f45a89109 RDX: 0000000000000000 RSI: 0000000020000080 RDI: 0000000000000006 RBP: 00007f6f45ae308d R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 00007ffed99029af R14: 00007f6f46c58300 R15: 0000000000022000 </TASK> Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Jay Vosburgh <j.vosburgh@gmail.com> Cc: Veaceslav Falico <vfalico@gmail.com> Cc: Andy Gospodarek <andy@greyhouse.net> Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com> Link: https://lore.kernel.org/r/20220627102813.126264-1-edumazet@google.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-06-24Bonding: add per-port priority for failover re-selectionHangbin Liu3-0/+75
Add per port priority support for bonding active slave re-selection during failover. A higher number means higher priority in selection. The primary slave still has the highest priority. This option also follows the primary_reselect rules. This option could only be configured via netlink. Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Acked-by: Jonathan Toppins <jtoppins@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-06-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-1/+3
No conflicts. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-18bonding: ARP monitor spams NETDEV_NOTIFY_PEERS notifiersJay Vosburgh1-1/+3
The bonding ARP monitor fails to decrement send_peer_notif, the number of peer notifications (gratuitous ARP or ND) to be sent. This results in a continuous series of notifications. Correct this by decrementing the counter for each notification. Reported-by: Jonathan Toppins <jtoppins@redhat.com> Signed-off-by: Jay Vosburgh <jay.vosburgh@canonical.com> Fixes: b0929915e035 ("bonding: Fix RTNL: assertion failed at net/core/rtnetlink.c for ab arp monitor") Link: https://lore.kernel.org/netdev/b2fd4147-8f50-bebd-963a-1a3e8d1d9715@redhat.com/ Tested-by: Jonathan Toppins <jtoppins@redhat.com> Reviewed-by: Jonathan Toppins <jtoppins@redhat.com> Link: https://lore.kernel.org/r/9400.1655407960@famine Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-10bonding: cleanup bond_createJonathan Toppins1-18/+6
Setting RLB_NULL_INDEX is not needed as this is done in bond_alb_initialize which is called by bond_open. Also reduce the number of rtnl_unlock calls by just using the standard goto cleanup path. Signed-off-by: Jonathan Toppins <jtoppins@redhat.com> Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-10bonding: netlink error message support for optionsJonathan Toppins2-40/+93
Add support for reporting errors via extack in both bond_newlink and bond_changelink. Instead of having to look in the kernel log for why an option was not correct just report the error to the user via the extack variable. What is currently reported today: ip link add bond0 type bond ip link set bond0 up ip link set bond0 type bond mode 4 RTNETLINK answers: Device or resource busy After this change: ip link add bond0 type bond ip link set bond0 up ip link set bond0 type bond mode 4 Error: unable to set option because the bond is up. Signed-off-by: Jonathan Toppins <jtoppins@redhat.com> Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-06-01bonding: guard ns_targets by CONFIG_IPV6Hangbin Liu2-4/+8
Guard ns_targets in struct bond_params by CONFIG_IPV6, which could save 256 bytes if IPv6 not configed. Also add this protection for function bond_is_ip6_target_ok() and bond_get_targets_ip6(). Remove the IS_ENABLED() check for bond_opts[] as this will make BOND_OPT_NS_TARGETS uninitialized if CONFIG_IPV6 not enabled. Add a dummy bond_option_ns_ip6_targets_set() for this situation. Fixes: 4e24be018eb9 ("bonding: add new parameter ns_targets") Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Acked-by: Jonathan Toppins <jtoppins@redhat.com> Link: https://lore.kernel.org/r/20220531063727.224043-1-liuhangbin@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-05-31bonding: show NS IPv6 targets in proc master infoHangbin Liu1-0/+15
When adding bond new parameter ns_targets. I forgot to print this in bond master proc info. After updating, the bond master info will look like: ARP IP target/s (n.n.n.n form): 192.168.1.254 NS IPv6 target/s (XX::XX form): 2022::1, 2022::2 Fixes: 4e24be018eb9 ("bonding: add new parameter ns_targets") Reported-by: Li Liang <liali@redhat.com> Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Link: https://lore.kernel.org/r/20220530062639.37179-1-liuhangbin@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2022-05-28bonding: NS target should accept link local addressHangbin Liu1-5/+0
When setting bond NS target, we use bond_is_ip6_target_ok() to check if the address valid. The link local address was wrongly rejected in bond_changelink(), as most time the user just set the ARP/NS target to gateway, while the IPv6 gateway is always a link local address when user set up interface via SLAAC. So remove the link local addr check when setting bond NS target. Fixes: 129e3c1bab24 ("bonding: add new option ns_ip6_target") Reported-by: Li Liang <liali@redhat.com> Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Reviewed-by: Jonathan Toppins <jtoppins@redhat.com> Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-05-24Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-3/+12
drivers/net/ethernet/cadence/macb_main.c 5cebb40bc955 ("net: macb: Fix PTP one step sync support") 138badbc21a0 ("net: macb: use NAPI for TX completion path") https://lore.kernel.org/all/20220523111021.31489367@canb.auug.org.au/ net/smc/af_smc.c 75c1edf23b95 ("net/smc: postpone sk_refcnt increment in connect()") 3aba103006bc ("net/smc: align the connect behaviour with TCP") https://lore.kernel.org/all/20220524114408.4bf1af38@canb.auug.org.au/ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-20bonding: fix missed rcu protectionHangbin Liu1-3/+12
When removing the rcu_read_lock in bond_ethtool_get_ts_info() as discussed [1], I didn't notice it could be called via setsockopt, which doesn't hold rcu lock, as syzbot pointed: stack backtrace: CPU: 0 PID: 3599 Comm: syz-executor317 Not tainted 5.18.0-rc5-syzkaller-01392-g01f4685797a5 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106 bond_option_active_slave_get_rcu include/net/bonding.h:353 [inline] bond_ethtool_get_ts_info+0x32c/0x3a0 drivers/net/bonding/bond_main.c:5595 __ethtool_get_ts_info+0x173/0x240 net/ethtool/common.c:554 ethtool_get_phc_vclocks+0x99/0x110 net/ethtool/common.c:568 sock_timestamping_bind_phc net/core/sock.c:869 [inline] sock_set_timestamping+0x3a3/0x7e0 net/core/sock.c:916 sock_setsockopt+0x543/0x2ec0 net/core/sock.c:1221 __sys_setsockopt+0x55e/0x6a0 net/socket.c:2223 __do_sys_setsockopt net/socket.c:2238 [inline] __se_sys_setsockopt net/socket.c:2235 [inline] __x64_sys_setsockopt+0xba/0x150 net/socket.c:2235 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f8902c8eb39 Fix it by adding rcu_read_lock and take a ref on the real_dev. Since dev_hold() and dev_put() can take NULL these days, we can skip checking if real_dev exist. [1] https://lore.kernel.org/netdev/27565.1642742439@famine/ Reported-by: syzbot+92beb3d46aab498710fa@syzkaller.appspotmail.com Fixes: aa6034678e87 ("bonding: use rcu_dereference_rtnl when get bonding active slave") Suggested-by: Vladimir Oltean <vladimir.oltean@nxp.com> Suggested-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Link: https://lore.kernel.org/r/20220519020148.1058344-1-liuhangbin@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-05-06net: make drivers set the TSO limit not the GSO limitJakub Kicinski1-6/+6
Drivers should call the TSO setting helper, GSO is controllable by user space. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-22ipv6: Use ipv6_only_sock() helper in condition.Kuniyuki Iwashima1-1/+1
This patch replaces some sk_ipv6only tests with ipv6_only_sock(). Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.co.jp> Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-04-17bonding: do not discard lowest hash bit for non layer3+4 hashingsuresh kumar1-4/+9
Commit b5f862180d70 was introduced to discard lowest hash bit for layer3+4 hashing but it also removes last bit from non layer3+4 hashing Below script shows layer2+3 hashing will result in same slave to be used with above commit. $ cat hash.py #/usr/bin/python3.6 h_dests=[0xa0, 0xa1] h_source=0xe3 hproto=0x8 saddr=0x1e7aa8c0 daddr=0x17aa8c0 for h_dest in h_dests: hash = (h_dest ^ h_source ^ hproto ^ saddr ^ daddr) hash ^= hash >> 16 hash ^= hash >> 8 print(hash) print("with last bit removed") for h_dest in h_dests: hash = (h_dest ^ h_source ^ hproto ^ saddr ^ daddr) hash ^= hash >> 16 hash ^= hash >> 8 hash = hash >> 1 print(hash) Output: $ python3.6 hash.py 522133332 522133333 <-------------- will result in both slaves being used with last bit removed 261066666 261066666 <-------------- only single slave used Signed-off-by: suresh kumar <suresh2514@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-03-12net: add per-cpu storage and net->core_statsEric Dumazet1-1/+1
Before adding yet another possibly contended atomic_long_t, it is time to add per-cpu storage for existing ones: dev->tx_dropped, dev->rx_dropped, and dev->rx_nohandler Because many devices do not have to increment such counters, allocate the per-cpu storage on demand, so that dev_get_stats() does not have to spend considerable time folding zero counters. Note that some drivers have abused these counters which were supposed to be only used by core networking stack. v4: should use per_cpu_ptr() in dev_get_stats() (Jakub) v3: added a READ_ONCE() in netdev_core_stats_alloc() (Paolo) v2: add a missing include (reported by kernel test robot <lkp@intel.com>) Change in netdev_core_stats_alloc() (Jakub) Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: jeffreyji <jeffreyji@google.com> Reviewed-by: Brian Vazquez <brianvv@google.com> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Acked-by: Paolo Abeni <pabeni@redhat.com> Link: https://lore.kernel.org/r/20220311051420.2608812-1-eric.dumazet@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-03-06bonding: helper macro __ATTR_RO to make code more clearLianjie Zhang1-7/+1
Signed-off-by: Lianjie Zhang <zhanglianjie@uniontech.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-21bonding: add new option ns_ip6_targetHangbin Liu2-0/+131
This patch add a new bonding option ns_ip6_target, which correspond to the arp_ip_target. With this we set IPv6 targets and send IPv6 NS request to determine the health of the link. For other related options like the validation, we still use arp_validate, and will change to ns_validate later. Note: the sysfs configuration support was removed based on https://lore.kernel.org/netdev/8863.1645071997@famine Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-21bonding: add new parameter ns_targetsHangbin Liu2-20/+219
Add a new bonding parameter ns_targets to store IPv6 address. Add required bond_ns_send/rcv functions first before adding IPv6 address option setting. Add two functions bond_send/rcv_validate so we can send/recv ARP and NS at the same time. Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-21Bonding: split bond_handle_vlan from bond_arp_sendHangbin Liu1-24/+34
Function bond_handle_vlan() is split from bond_arp_send() for later IPv6 usage. Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-17Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski2-8/+27
No conflicts. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-02-17bonding: force carrier update when releasing slaveZhang Changzhong1-3/+2
In __bond_release_one(), bond_set_carrier() is only called when bond device has no slave. Therefore, if we remove the up slave from a master with two slaves and keep the down slave, the master will remain up. Fix this by moving bond_set_carrier() out of if (!bond_has_slaves(bond)) statement. Reproducer: $ insmod bonding.ko mode=0 miimon=100 max_bonds=2 $ ifconfig bond0 up $ ifenslave bond0 eth0 eth1 $ ifconfig eth0 down $ ifenslave -d bond0 eth1 $ cat /proc/net/bonding/bond0 Fixes: ff59c4563a8d ("[PATCH] bonding: support carrier state for master") Signed-off-by: Zhang Changzhong <zhangchangzhong@huawei.com> Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com> Link: https://lore.kernel.org/r/1645021088-38370-1-git-send-email-zhangchangzhong@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-02-15bonding: fix data-races around agg_select_timerEric Dumazet1-5/+25
syzbot reported that two threads might write over agg_select_timer at the same time. Make agg_select_timer atomic to fix the races. BUG: KCSAN: data-race in bond_3ad_initiate_agg_selection / bond_3ad_state_machine_handler read to 0xffff8881242aea90 of 4 bytes by task 1846 on cpu 1: bond_3ad_state_machine_handler+0x99/0x2810 drivers/net/bonding/bond_3ad.c:2317 process_one_work+0x3f6/0x960 kernel/workqueue.c:2307 worker_thread+0x616/0xa70 kernel/workqueue.c:2454 kthread+0x1bf/0x1e0 kernel/kthread.c:377 ret_from_fork+0x1f/0x30 write to 0xffff8881242aea90 of 4 bytes by task 25910 on cpu 0: bond_3ad_initiate_agg_selection+0x18/0x30 drivers/net/bonding/bond_3ad.c:1998 bond_open+0x658/0x6f0 drivers/net/bonding/bond_main.c:3967 __dev_open+0x274/0x3a0 net/core/dev.c:1407 dev_open+0x54/0x190 net/core/dev.c:1443 bond_enslave+0xcef/0x3000 drivers/net/bonding/bond_main.c:1937 do_set_master net/core/rtnetlink.c:2532 [inline] do_setlink+0x94f/0x2500 net/core/rtnetlink.c:2736 __rtnl_newlink net/core/rtnetlink.c:3414 [inline] rtnl_newlink+0xfeb/0x13e0 net/core/rtnetlink.c:3529 rtnetlink_rcv_msg+0x745/0x7e0 net/core/rtnetlink.c:5594 netlink_rcv_skb+0x14e/0x250 net/netlink/af_netlink.c:2494 rtnetlink_rcv+0x18/0x20 net/core/rtnetlink.c:5612 netlink_unicast_kernel net/netlink/af_netlink.c:1317 [inline] netlink_unicast+0x602/0x6d0 net/netlink/af_netlink.c:1343 netlink_sendmsg+0x728/0x850 net/netlink/af_netlink.c:1919 sock_sendmsg_nosec net/socket.c:705 [inline] sock_sendmsg net/socket.c:725 [inline] ____sys_sendmsg+0x39a/0x510 net/socket.c:2413 ___sys_sendmsg net/socket.c:2467 [inline] __sys_sendmsg+0x195/0x230 net/socket.c:2496 __do_sys_sendmsg net/socket.c:2505 [inline] __se_sys_sendmsg net/socket.c:2503 [inline] __x64_sys_sendmsg+0x42/0x50 net/socket.c:2503 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x44/0xd0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae value changed: 0x00000050 -> 0x0000004f Reported by Kernel Concurrency Sanitizer on: CPU: 0 PID: 25910 Comm: syz-executor.1 Tainted: G W 5.17.0-rc4-syzkaller-dirty #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Cc: Jay Vosburgh <j.vosburgh@gmail.com> Cc: Veaceslav Falico <vfalico@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-02-11Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-1/+2
No conflicts. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-02-09bonding: switch bond_net_exit() to batch modeEric Dumazet2-9/+19
cleanup_net() is competing with other rtnl users. Batching bond_net_exit() factorizes all rtnl acquistions to a single one, giving chance for cleanup_net() to progress much faster, holding rtnl a bit longer. Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Jay Vosburgh <j.vosburgh@gmail.com> Cc: Veaceslav Falico <vfalico@gmail.com> Cc: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-02-09bonding: pair enable_port with slave_arr_updatesMahesh Bandewar1-1/+2
When 803.2ad mode enables a participating port, it should update the slave-array. I have observed that the member links are participating and are part of the active aggregator while the traffic is egressing via only one member link (in a case where two links are participating). Via kprobes I discovered that slave-arr has only one link added while the other participating link wasn't part of the slave-arr. I couldn't see what caused that situation but the simple code-walk through provided me hints that the enable_port wasn't always associated with the slave-array update. Fixes: ee6377147409 ("bonding: Simplify the xmit function for modes that use xmit_hash") Signed-off-by: Mahesh Bandewar <maheshb@google.com> Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com> Link: https://lore.kernel.org/r/20220207222901.1795287-1-maheshb@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-02-05net: don't include ndisc.h from ipv6.hJakub Kicinski1-0/+1
Nothing in ipv6.h needs ndisc.h, drop it. Link: https://lore.kernel.org/r/20220203043457.2222388-1-kuba@kernel.org Acked-by: Jeremy Kerr <jk@codeconstruct.com.au> Acked-by: Stefan Schmidt <stefan@datenfreihafen.org> Link: https://lore.kernel.org/r/20220203231240.2297588-1-kuba@kernel.org Reviewed-by: David Ahern <dsahern@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-01-31net: bonding: Add support for IPV6 ns/na to balance-alb/balance-tlb modeSun Shouxin1-2/+28
Since ipv6 neighbor solicitation and advertisement messages isn't handled gracefully in bond6 driver, we can see packet drop due to inconsistency between mac address in the option message and source MAC . Another examples is ipv6 neighbor solicitation and advertisement messages from VM via tap attached to host bridge, the src mac might be changed through balance-alb mode, but it is not synced with Link-layer address in the option message. The patch implements bond6's tx handle for ipv6 neighbor solicitation and advertisement messages. Suggested-by: Hu Yadi <huyd12@chinatelecom.cn> Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com> Signed-off-by: Sun Shouxin <sunshouxin@chinatelecom.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-01-27Merge tag 'net-5.17-rc2' of ↵Linus Torvalds1-4/+0
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Including fixes from netfilter and can. Current release - new code bugs: - tcp: add a missing sk_defer_free_flush() in tcp_splice_read() - tcp: add a stub for sk_defer_free_flush(), fix CONFIG_INET=n - nf_tables: set last expression in register tracking area - nft_connlimit: fix memleak if nf_ct_netns_get() fails - mptcp: fix removing ids bitmap setting - bonding: use rcu_dereference_rtnl when getting active slave - fix three cases of sleep in atomic context in drivers: lan966x, gve - handful of build fixes for esoteric drivers after netdev->dev_addr was made const Previous releases - regressions: - revert "ipv6: Honor all IPv6 PIO Valid Lifetime values", it broke Linux compatibility with USGv6 tests - procfs: show net device bound packet types - ipv4: fix ip option filtering for locally generated fragments - phy: broadcom: hook up soft_reset for BCM54616S Previous releases - always broken: - ipv4: raw: lock the socket in raw_bind() - ipv4: decrease the use of shared IPID generator to decrease the chance of attackers guessing the values - procfs: fix cross-netns information leakage in /proc/net/ptype - ethtool: fix link extended state for big endian - bridge: vlan: fix single net device option dumping - ping: fix the sk_bound_dev_if match in ping_lookup" * tag 'net-5.17-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (86 commits) net: bridge: vlan: fix memory leak in __allowed_ingress net: socket: rename SKB_DROP_REASON_SOCKET_FILTER ipv4: remove sparse error in ip_neigh_gw4() ipv4: avoid using shared IP generator for connected sockets ipv4: tcp: send zero IPID in SYNACK messages ipv4: raw: lock the socket in raw_bind() MAINTAINERS: add missing IPv4/IPv6 header paths MAINTAINERS: add more files to eth PHY net: stmmac: dwmac-sun8i: use return val of readl_poll_timeout() net: bridge: vlan: fix single net device option dumping net: stmmac: skip only stmmac_ptp_register when resume from suspend net: stmmac: configure PTP clock source prior to PTP initialization Revert "ipv6: Honor all IPv6 PIO Valid Lifetime values" connector/cn_proc: Use task_is_in_init_pid_ns() pid: Introduce helper task_is_in_init_pid_ns() gve: Fix GFP flags when allocing pages net: lan966x: Fix sleep in atomic context when updating MAC table net: lan966x: Fix sleep in atomic context when injecting frames ethernet: seeq/ether3: don't write directly to netdev->dev_addr ethernet: 8390/etherh: don't write directly to netdev->dev_addr ...
2022-01-24bonding: use rcu_dereference_rtnl when get bonding active slaveHangbin Liu1-4/+0
bond_option_active_slave_get_rcu() should not be used in rtnl_mutex as it use rcu_dereference(). Replace to rcu_dereference_rtnl() so we also can use this function in rtnl protected context. With this update, we can rmeove the rcu_read_lock/unlock in bonding .ndo_eth_ioctl and .get_ts_info. Reported-by: Vladimir Oltean <vladimir.oltean@nxp.com> Fixes: 94dd016ae538 ("bond: pass get_ts_info and SIOC[SG]HWTSTAMP ioctl to active device") Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-01-22proc: remove PDE_DATA() completelyMuchun Song1-4/+4
Remove PDE_DATA() completely and replace it with pde_data(). [akpm@linux-foundation.org: fix naming clash in drivers/nubus/proc.c] [akpm@linux-foundation.org: now fix it properly] Link: https://lkml.kernel.org/r/20211124081956.87711-2-songmuchun@bytedance.com Signed-off-by: Muchun Song <songmuchun@bytedance.com> Acked-by: Christian Brauner <christian.brauner@ubuntu.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Alexey Gladkov <gladkov.alexey@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-23 02:58:01 +0300