summaryrefslogtreecommitdiff
path: root/drivers/net/bonding
AgeCommit message (Collapse)AuthorFilesLines
2022-01-22proc: remove PDE_DATA() completelyMuchun Song1-4/+4
Remove PDE_DATA() completely and replace it with pde_data(). [akpm@linux-foundation.org: fix naming clash in drivers/nubus/proc.c] [akpm@linux-foundation.org: now fix it properly] Link: https://lkml.kernel.org/r/20211124081956.87711-2-songmuchun@bytedance.com Signed-off-by: Muchun Song <songmuchun@bytedance.com> Acked-by: Christian Brauner <christian.brauner@ubuntu.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Alexey Gladkov <gladkov.alexey@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2022-01-17bonding: Fix extraction of ports from the packet headersMoshe Tal1-2/+2
Wrong hash sends single stream to multiple output interfaces. The offset calculation was relative to skb->head, fix it to be relative to skb->data. Fixes: a815bde56b15 ("net, bonding: Refactor bond_xmit_hash for use with xdp_buff") Reviewed-by: Jussi Maki <joamaki@gmail.com> Reviewed-by: Saeed Mahameed <saeedm@nvidia.com> Reviewed-by: Gal Pressman <gal@nvidia.com> Signed-off-by: Moshe Tal <moshet@nvidia.com> Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-01-12net: bonding: fix bond_xmit_broadcast return value error bugJie Wang1-8/+22
In Linux bonding scenario, one packet is copied to several copies and sent by all slave device of bond0 in mode 3(broadcast mode). The mode 3 xmit function bond_xmit_broadcast() only ueses the last slave device's tx result as the final result. In this case, if the last slave device is down, then it always return NET_XMIT_DROP, even though the other slave devices xmit success. It may cause the tx statistics error, and cause the application (e.g. scp) consider the network is unreachable. For example, use the following command to configure server A. echo 3 > /sys/class/net/bond0/bonding/mode ifconfig bond0 up ifenslave bond0 eth0 eth1 ifconfig bond0 192.168.1.125 ifconfig eth0 up ifconfig eth1 down The slave device eth0 and eth1 are connected to server B(192.168.1.107). Run the ping 192.168.1.107 -c 3 -i 0.2 command, the following information is displayed. PING 192.168.1.107 (192.168.1.107) 56(84) bytes of data. 64 bytes from 192.168.1.107: icmp_seq=1 ttl=64 time=0.077 ms 64 bytes from 192.168.1.107: icmp_seq=2 ttl=64 time=0.056 ms 64 bytes from 192.168.1.107: icmp_seq=3 ttl=64 time=0.051 ms 192.168.1.107 ping statistics 0 packets transmitted, 3 received Actually, the slave device eth0 of the bond successfully sends three ICMP packets, but the result shows that 0 packets are transmitted. Also if we use scp command to get remote files, the command end with the following printings. ssh_exchange_identification: read: Connection timed out So this patch modifies the bond_xmit_broadcast to return NET_XMIT_SUCCESS if one slave device in the bond sends packets successfully. If all slave devices send packets fail, the discarded packets stats is increased. The skb is released when there is no slave device in the bond or the last slave device is down. Fixes: ae46f184bc1f ("bonding: propagate transmit status") Signed-off-by: Jie Wang <wangjie125@huawei.com> Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-31Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextDavid S. Miller1-0/+1
Alexei Starovoitov says: ==================== pull-request: bpf-next 2021-12-30 The following pull-request contains BPF updates for your *net-next* tree. We've added 72 non-merge commits during the last 20 day(s) which contain a total of 223 files changed, 3510 insertions(+), 1591 deletions(-). The main changes are: 1) Automatic setrlimit in libbpf when bpf is memcg's in the kernel, from Andrii. 2) Beautify and de-verbose verifier logs, from Christy. 3) Composable verifier types, from Hao. 4) bpf_strncmp helper, from Hou. 5) bpf.h header dependency cleanup, from Jakub. 6) get_func_[arg|ret|arg_cnt] helpers, from Jiri. 7) Sleepable local storage, from KP. 8) Extend kfunc with PTR_TO_CTX, PTR_TO_MEM argument support, from Kumar. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-29Bonding: return HWTSTAMP_FLAG_BONDED_PHC_INDEX to notify user spaceHangbin Liu1-16/+26
If the userspace program is distributed in binary form (distro package), there is no way to know on which kernel versions it will run. Let's only check if the flag was set when do SIOCSHWTSTAMP. And return hwtstamp_config with flag HWTSTAMP_FLAG_BONDED_PHC_INDEX to notify userspace whether the new feature is supported or not. Suggested-by: Jakub Kicinski <kuba@kernel.org> Fixes: 085d61000845 ("Bonding: force user to add HWTSTAMP_FLAG_BONDED_PHC_INDEX when get/set HWTSTAMP") Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-12-29net: Don't include filter.h from net/sock.hJakub Kicinski1-0/+1
sock.h is pretty heavily used (5k objects rebuilt on x86 after it's touched). We can drop the include of filter.h from it and add a forward declaration of struct sk_filter instead. This decreases the number of rebuilt objects when bpf.h is touched from ~5k to ~1k. There's a lot of missing includes this was masking. Primarily in networking tho, this time. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Nikolay Aleksandrov <nikolay@nvidia.com> Acked-by: Stefano Garzarella <sgarzare@redhat.com> Link: https://lore.kernel.org/bpf/20211229004913.513372-1-kuba@kernel.org
2021-12-24Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-1/+1
include/net/sock.h commit 8f905c0e7354 ("inet: fully convert sk->sk_rx_dst to RCU rules") commit 43f51df41729 ("net: move early demux fields close to sk_refcnt") https://lore.kernel.org/all/20211222141641.0caa0ab3@canb.auug.org.au/ Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-12-22bonding: fix ad_actor_system option setting to defaultFernando Fernandez Mancera1-1/+1
When 802.3ad bond mode is configured the ad_actor_system option is set to "00:00:00:00:00:00". But when trying to set the all-zeroes MAC as actors' system address it was failing with EINVAL. An all-zeroes ethernet address is valid, only multicast addresses are not valid values. Fixes: 171a42c38c6e ("bonding: add netlink support for sys prio, actor sys mac, and port key") Signed-off-by: Fernando Fernandez Mancera <ffmancera@riseup.net> Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com> Link: https://lore.kernel.org/r/20211221111345.2462-1-ffmancera@riseup.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-12-14Bonding: force user to add HWTSTAMP_FLAG_BONDED_PHC_INDEX when get/set HWTSTAMPHangbin Liu1-12/+21
When there is a failover, the PHC index of bond active interface will be changed. This may break the user space program if the author didn't aware. By setting this flag, the user should aware that the PHC index get/set by syscall is not stable. And the user space is able to deal with it. Without this flag, the kernel will reject the request forwarding to bonding. Reported-by: Jakub Kicinski <kuba@kernel.org> Fixes: 94dd016ae538 ("bond: pass get_ts_info and SIOC[SG]HWTSTAMP ioctl to active device") Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-13net: bonding: debug: avoid printing debug logs when bond is not notifying peersSuresh Kumar1-3/+3
Currently "bond_should_notify_peers: slave ..." messages are printed whenever "bond_should_notify_peers" function is called. +++ Dec 12 12:33:26 node1 kernel: bond0: bond_should_notify_peers: slave enp0s25 Dec 12 12:33:26 node1 kernel: bond0: bond_should_notify_peers: slave enp0s25 Dec 12 12:33:26 node1 kernel: bond0: bond_should_notify_peers: slave enp0s25 Dec 12 12:33:26 node1 kernel: bond0: (slave enp0s25): Received LACPDU on port 1 Dec 12 12:33:26 node1 kernel: bond0: (slave enp0s25): Rx Machine: Port=1, Last State=6, Curr State=6 Dec 12 12:33:26 node1 kernel: bond0: (slave enp0s25): partner sync=1 Dec 12 12:33:26 node1 kernel: bond0: bond_should_notify_peers: slave enp0s25 Dec 12 12:33:26 node1 kernel: bond0: bond_should_notify_peers: slave enp0s25 Dec 12 12:33:26 node1 kernel: bond0: bond_should_notify_peers: slave enp0s25 ... Dec 12 12:33:30 node1 kernel: bond0: bond_should_notify_peers: slave enp0s25 Dec 12 12:33:30 node1 kernel: bond0: bond_should_notify_peers: slave enp0s25 Dec 12 12:33:30 node1 kernel: bond0: (slave enp4s3): Received LACPDU on port 2 Dec 12 12:33:30 node1 kernel: bond0: (slave enp4s3): Rx Machine: Port=2, Last State=6, Curr State=6 Dec 12 12:33:30 node1 kernel: bond0: (slave enp4s3): partner sync=1 Dec 12 12:33:30 node1 kernel: bond0: bond_should_notify_peers: slave enp0s25 Dec 12 12:33:30 node1 kernel: bond0: bond_should_notify_peers: slave enp0s25 Dec 12 12:33:30 node1 kernel: bond0: bond_should_notify_peers: slave enp0s25 +++ This is confusing and can also clutter up debug logs. Print logs only when the peer notification happens. Signed-off-by: Suresh Kumar <suresh2514@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-12-10Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-6/+8
No conflicts. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-12-03bonding: make tx_rebalance_counter an atomicEric Dumazet1-6/+8
KCSAN reported a data-race [1] around tx_rebalance_counter which can be accessed from different contexts, without the protection of a lock/mutex. [1] BUG: KCSAN: data-race in bond_alb_init_slave / bond_alb_monitor write to 0xffff888157e8ca24 of 4 bytes by task 7075 on cpu 0: bond_alb_init_slave+0x713/0x860 drivers/net/bonding/bond_alb.c:1613 bond_enslave+0xd94/0x3010 drivers/net/bonding/bond_main.c:1949 do_set_master net/core/rtnetlink.c:2521 [inline] __rtnl_newlink net/core/rtnetlink.c:3475 [inline] rtnl_newlink+0x1298/0x13b0 net/core/rtnetlink.c:3506 rtnetlink_rcv_msg+0x745/0x7e0 net/core/rtnetlink.c:5571 netlink_rcv_skb+0x14e/0x250 net/netlink/af_netlink.c:2491 rtnetlink_rcv+0x18/0x20 net/core/rtnetlink.c:5589 netlink_unicast_kernel net/netlink/af_netlink.c:1319 [inline] netlink_unicast+0x5fc/0x6c0 net/netlink/af_netlink.c:1345 netlink_sendmsg+0x6e1/0x7d0 net/netlink/af_netlink.c:1916 sock_sendmsg_nosec net/socket.c:704 [inline] sock_sendmsg net/socket.c:724 [inline] ____sys_sendmsg+0x39a/0x510 net/socket.c:2409 ___sys_sendmsg net/socket.c:2463 [inline] __sys_sendmsg+0x195/0x230 net/socket.c:2492 __do_sys_sendmsg net/socket.c:2501 [inline] __se_sys_sendmsg net/socket.c:2499 [inline] __x64_sys_sendmsg+0x42/0x50 net/socket.c:2499 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x44/0xd0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae read to 0xffff888157e8ca24 of 4 bytes by task 1082 on cpu 1: bond_alb_monitor+0x8f/0xc00 drivers/net/bonding/bond_alb.c:1511 process_one_work+0x3fc/0x980 kernel/workqueue.c:2298 worker_thread+0x616/0xa70 kernel/workqueue.c:2445 kthread+0x2c7/0x2e0 kernel/kthread.c:327 ret_from_fork+0x1f/0x30 value changed: 0x00000001 -> 0x00000064 Reported by Kernel Concurrency Sanitizer on: CPU: 1 PID: 1082 Comm: kworker/u4:3 Not tainted 5.16.0-rc3-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Workqueue: bond1 bond_alb_monitor Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-30bond: pass get_ts_info and SIOC[SG]HWTSTAMP ioctl to active deviceHangbin Liu1-2/+53
We have VLAN PTP support(via get_ts_info) on kernel, and bond support(by getting active interface via netlink message) on userspace tool linuxptp. But there are always some users who want to use PTP with VLAN over bond, which is not able to do with the current implementation. This patch passed get_ts_info and SIOC[SG]HWTSTAMP ioctl to active device with bond mode active-backup/tlb/alb. With this users could get kernel native bond or VLAN over bond PTP support. Test with ptp4l and it works with VLAN over bond after this patch: ]# ptp4l -m -i bond0.23 ptp4l[53377.141]: selected /dev/ptp4 as PTP clock ptp4l[53377.142]: port 1: INITIALIZING to LISTENING on INIT_COMPLETE ptp4l[53377.143]: port 0: INITIALIZING to LISTENING on INIT_COMPLETE ptp4l[53377.143]: port 0: INITIALIZING to LISTENING on INIT_COMPLETE ptp4l[53384.127]: port 1: LISTENING to MASTER on ANNOUNCE_RECEIPT_TIMEOUT_EXPIRES ptp4l[53384.127]: selected local clock e41d2d.fffe.123db0 as best master ptp4l[53384.127]: port 1: assuming the grand master role Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-30Bonding: add arp_missed_max optionHangbin Liu5-8/+67
Currently, we use hard code number to verify if we are in the arp_interval timeslice. But some user may want to reduce/extend the verify timeslice. With the similar team option 'missed_max' the uers could change that number based on their own environment. Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com> Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-22net: annotate accesses to dev->gso_max_segsEric Dumazet1-1/+1
dev->gso_max_segs is written under RTNL protection, or when the device is not yet visible, but is read locklessly. Add netif_set_gso_max_segs() helper. Add the READ_ONCE()/WRITE_ONCE() pairs, and use netif_set_gso_max_segs() where we can to better document what is going on. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-11-05bonding: Fix a use-after-free problem when bond_sysfs_slave_add() failedHuang Guobin1-25/+11
When I do fuzz test for bonding device interface, I got the following use-after-free Calltrace: ================================================================== BUG: KASAN: use-after-free in bond_enslave+0x1521/0x24f0 Read of size 8 at addr ffff88825bc11c00 by task ifenslave/7365 CPU: 5 PID: 7365 Comm: ifenslave Tainted: G E 5.15.0-rc1+ #13 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1 04/01/2014 Call Trace: dump_stack_lvl+0x6c/0x8b print_address_description.constprop.0+0x48/0x70 kasan_report.cold+0x82/0xdb __asan_load8+0x69/0x90 bond_enslave+0x1521/0x24f0 bond_do_ioctl+0x3e0/0x450 dev_ifsioc+0x2ba/0x970 dev_ioctl+0x112/0x710 sock_do_ioctl+0x118/0x1b0 sock_ioctl+0x2e0/0x490 __x64_sys_ioctl+0x118/0x150 do_syscall_64+0x35/0xb0 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f19159cf577 Code: b3 66 90 48 8b 05 11 89 2c 00 64 c7 00 26 00 00 00 48 c7 c0 ff ff ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 b8 10 00 00 00 0f 05 <48> 3d 01 f0 ff ff 78 RSP: 002b:00007ffeb3083c78 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 RAX: ffffffffffffffda RBX: 00007ffeb3084bca RCX: 00007f19159cf577 RDX: 00007ffeb3083ce0 RSI: 0000000000008990 RDI: 0000000000000003 RBP: 00007ffeb3084bc4 R08: 0000000000000040 R09: 0000000000000000 R10: 00007ffeb3084bc0 R11: 0000000000000246 R12: 00007ffeb3083ce0 R13: 0000000000000000 R14: 0000000000000000 R15: 00007ffeb3083cb0 Allocated by task 7365: kasan_save_stack+0x23/0x50 __kasan_kmalloc+0x83/0xa0 kmem_cache_alloc_trace+0x22e/0x470 bond_enslave+0x2e1/0x24f0 bond_do_ioctl+0x3e0/0x450 dev_ifsioc+0x2ba/0x970 dev_ioctl+0x112/0x710 sock_do_ioctl+0x118/0x1b0 sock_ioctl+0x2e0/0x490 __x64_sys_ioctl+0x118/0x150 do_syscall_64+0x35/0xb0 entry_SYSCALL_64_after_hwframe+0x44/0xae Freed by task 7365: kasan_save_stack+0x23/0x50 kasan_set_track+0x20/0x30 kasan_set_free_info+0x24/0x40 __kasan_slab_free+0xf2/0x130 kfree+0xd1/0x5c0 slave_kobj_release+0x61/0x90 kobject_put+0x102/0x180 bond_sysfs_slave_add+0x7a/0xa0 bond_enslave+0x11b6/0x24f0 bond_do_ioctl+0x3e0/0x450 dev_ifsioc+0x2ba/0x970 dev_ioctl+0x112/0x710 sock_do_ioctl+0x118/0x1b0 sock_ioctl+0x2e0/0x490 __x64_sys_ioctl+0x118/0x150 do_syscall_64+0x35/0xb0 entry_SYSCALL_64_after_hwframe+0x44/0xae Last potentially related work creation: kasan_save_stack+0x23/0x50 kasan_record_aux_stack+0xb7/0xd0 insert_work+0x43/0x190 __queue_work+0x2e3/0x970 delayed_work_timer_fn+0x3e/0x50 call_timer_fn+0x148/0x470 run_timer_softirq+0x8a8/0xc50 __do_softirq+0x107/0x55f Second to last potentially related work creation: kasan_save_stack+0x23/0x50 kasan_record_aux_stack+0xb7/0xd0 insert_work+0x43/0x190 __queue_work+0x2e3/0x970 __queue_delayed_work+0x130/0x180 queue_delayed_work_on+0xa7/0xb0 bond_enslave+0xe25/0x24f0 bond_do_ioctl+0x3e0/0x450 dev_ifsioc+0x2ba/0x970 dev_ioctl+0x112/0x710 sock_do_ioctl+0x118/0x1b0 sock_ioctl+0x2e0/0x490 __x64_sys_ioctl+0x118/0x150 do_syscall_64+0x35/0xb0 entry_SYSCALL_64_after_hwframe+0x44/0xae The buggy address belongs to the object at ffff88825bc11c00 which belongs to the cache kmalloc-1k of size 1024 The buggy address is located 0 bytes inside of 1024-byte region [ffff88825bc11c00, ffff88825bc12000) The buggy address belongs to the page: page:ffffea00096f0400 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x25bc10 head:ffffea00096f0400 order:3 compound_mapcount:0 compound_pincount:0 flags: 0x57ff00000010200(slab|head|node=1|zone=2|lastcpupid=0x7ff) raw: 057ff00000010200 ffffea0009a71c08 ffff888240001968 ffff88810004dbc0 raw: 0000000000000000 00000000000a000a 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff88825bc11b00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff88825bc11b80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc >ffff88825bc11c00: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff88825bc11c80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff88825bc11d00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ================================================================== Put new_slave in bond_sysfs_slave_add() will cause use-after-free problems when new_slave is accessed in the subsequent error handling process. Since new_slave will be put in the subsequent error handling process, remove the unnecessary put to fix it. In addition, when sysfs_create_file() fails, if some files have been crea- ted successfully, we need to call sysfs_remove_file() to remove them. Since there are sysfs_create_files() & sysfs_remove_files() can be used, use these two functions instead. Fixes: 7afcaec49696 (bonding: use kobject_put instead of _del after kobject_add) Signed-off-by: Huang Guobin <huangguobin4@huawei.com> Reviewed-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-24net: bonding: constify and use dev_addr_set()Jakub Kicinski2-16/+14
Commit 406f42fa0d3c ("net-next: When a bond have a massive amount of VLANs...") introduced a rbtree for faster Ethernet address look up. To maintain netdev->dev_addr in this tree we need to make all the writes to it go through appropriate helpers. Make sure local references to netdev->dev_addr are constant. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-09net: use dev_addr_set()Jakub Kicinski1-1/+1
Use dev_addr_set() instead of writing directly to netdev->dev_addr in various misc and old drivers. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-10-08bonding: use the correct function to check for netdev name collisionAntoine Tenart1-2/+2
A new helper to detect if a net device name is in use was added. Use it here as the return reference from __dev_get_by_name was discarded. Signed-off-by: Antoine Tenart <atenart@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-07bonding: 3ad: pass parameter bond_params by referenceColin Ian King1-4/+4
The parameter bond_params is a relatively large 192 byte sized struct so pass it by reference rather than by value to reduce copying. Addresses-Coverity: ("Big parameter passed by value") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-06bonding: Fix negative jump label count on nested bondingJussi Maki1-6/+5
With nested bonding devices the nested bond device's ndo_bpf was called without a program causing it to decrement the static key without a prior increment leading to negative count. Fix the issue by 1) only calling slave's ndo_bpf when there's a program to be loaded and 2) only decrement the count when a program is unloaded. Fixes: 9e2ee5c7e7c3 ("net, bonding: Add XDP support to the bonding driver") Reported-by: syzbot+30622fb04ddd72a4d167@syzkaller.appspotmail.com Signed-off-by: Jussi Maki <joamaki@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-09-05bonding: complain about missing route only once for A/B ARP probesDavid Decotigny1-3/+3
On configs where there is no confirgured direct route to the target of the ARP probes, these probes are still sent and may be replied to properly, so no need to repeatedly complain about the missing route. Signed-off-by: David Decotigny <ddecotig@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-16bonding: improve nl error msg when device can't be enslaved because of ↵Antoine Tenart1-1/+1
IFF_MASTER Use a more user friendly netlink error message when a device can't be enslaved because it has IFF_MASTER, by not referring directly to a kernel internal flag. Signed-off-by: Antoine Tenart <atenart@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-14net, bonding: Disallow vlan+srcmac with XDPJussi Maki1-7/+11
The new vlan+srcmac xmit policy is not implementable with XDP since in many cases the 802.1Q payload is not present in the packet. This can be for example due to hardware offload or in the case of veth due to use of skbuffs internally. This also fixes the NULL deref with the vlan+srcmac xmit policy reported by Jonathan Toppins by additionally checking the skb pointer. Fixes: a815bde56b15 ("net, bonding: Refactor bond_xmit_hash for use with xdp_buff") Reported-by: Jonathan Toppins <jtoppins@redhat.com> Signed-off-by: Jussi Maki <joamaki@gmail.com> Reviewed-by: Jonathan Toppins <jtoppins@redhat.com> Link: https://lore.kernel.org/r/20210812145241.12449-1-joamaki@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-08-12bonding: combine netlink and console error messagesJonathan Toppins1-32/+37
There seems to be no reason to have different error messages between netlink and printk. It also cleans up the function slightly. Signed-off-by: Jonathan Toppins <jtoppins@redhat.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-08-10Merge https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextJakub Kicinski1-57/+397
Daniel Borkmann says: ==================== bpf-next 2021-08-10 We've added 31 non-merge commits during the last 8 day(s) which contain a total of 28 files changed, 3644 insertions(+), 519 deletions(-). 1) Native XDP support for bonding driver & related BPF selftests, from Jussi Maki. 2) Large batch of new BPF JIT tests for test_bpf.ko that came out as a result from 32-bit MIPS JIT development, from Johan Almbladh. 3) Rewrite of netcnt BPF selftest and merge into test_progs, from Stanislav Fomichev. 4) Fix XDP bpf_prog_test_run infra after net to net-next merge, from Andrii Nakryiko. 5) Follow-up fix in unix_bpf_update_proto() to enforce socket type, from Cong Wang. 6) Fix bpf-iter-tcp4 selftest to print the correct dest IP, from Jose Blanquicet. 7) Various misc BPF XDP sample improvements, from Niklas Söderlund, Matthew Cover, and Muhammad Falak R Wani. * https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (31 commits) bpf, tests: Add tail call test suite bpf, tests: Add tests for BPF_CMPXCHG bpf, tests: Add tests for atomic operations bpf, tests: Add test for 32-bit context pointer argument passing bpf, tests: Add branch conversion JIT test bpf, tests: Add word-order tests for load/store of double words bpf, tests: Add tests for ALU operations implemented with function calls bpf, tests: Add more ALU64 BPF_MUL tests bpf, tests: Add more BPF_LSH/RSH/ARSH tests for ALU64 bpf, tests: Add more ALU32 tests for BPF_LSH/RSH/ARSH bpf, tests: Add more tests of ALU32 and ALU64 bitwise operations bpf, tests: Fix typos in test case descriptions bpf, tests: Add BPF_MOV tests for zero and sign extension bpf, tests: Add BPF_JMP32 test cases samples, bpf: Add an explict comment to handle nested vlan tagging. selftests/bpf: Add tests for XDP bonding selftests/bpf: Fix xdp_tx.c prog section name net, core: Allow netdev_lower_get_next_private_rcu in bh context bpf, devmap: Exclude XDP broadcast to master device net, bonding: Add XDP support to the bonding driver ... ==================== Link: https://lore.kernel.org/r/20210810130038.16927-1-daniel@iogearbox.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-08-10net, bonding: Add XDP support to the bonding driverJussi Maki1-1/+308
XDP is implemented in the bonding driver by transparently delegating the XDP program loading, removal and xmit operations to the bonding slave devices. The overall goal of this work is that XDP programs can be attached to a bond device *without* any further changes (or awareness) necessary to the program itself, meaning the same XDP program can be attached to a native device but also a bonding device. Semantics of XDP_TX when attached to a bond are equivalent in such setting to the case when a tc/BPF program would be attached to the bond, meaning transmitting the packet out of the bond itself using one of the bond's configured xmit methods to select a slave device (rather than XDP_TX on the slave itself). Handling of XDP_TX to transmit using the configured bonding mechanism is therefore implemented by rewriting the BPF program return value in bpf_prog_run_xdp. To avoid performance impact this check is guarded by a static key, which is incremented when a XDP program is loaded onto a bond device. This approach was chosen to avoid changes to drivers implementing XDP. If the slave device does not match the receive device, then XDP_REDIRECT is transparently used to perform the redirection in order to have the network driver release the packet from its RX ring. The bonding driver hashing functions have been refactored to allow reuse with xdp_buff's to avoid code duplication. The motivation for this change is to enable use of bonding (and 802.3ad) in hairpinning L4 load-balancers such as [1] implemented with XDP and also to transparently support bond devices for projects that use XDP given most modern NICs have dual port adapters. An alternative to this approach would be to implement 802.3ad in user-space and implement the bonding load-balancing in the XDP program itself, but is rather a cumbersome endeavor in terms of slave device management (e.g. by watching netlink) and requires separate programs for native vs bond cases for the orchestrator. A native in-kernel implementation overcomes these issues and provides more flexibility. Below are benchmark results done on two machines with 100Gbit Intel E810 (ice) NIC and with 32-core 3970X on sending machine, and 16-core 3950X on receiving machine. 64 byte packets were sent with pktgen-dpdk at full rate. Two issues [2, 3] were identified with the ice driver, so the tests were performed with iommu=off and patch [2] applied. Additionally the bonding round robin algorithm was modified to use per-cpu tx counters as high CPU load (50% vs 10%) and high rate of cache misses were caused by the shared rr_tx_counter (see patch 2/3). The statistics were collected using "sar -n dev -u 1 10". On top of that, for ice, further work is in progress on improving the XDP_TX numbers [4]. -----------------------| CPU |--| rxpck/s |--| txpck/s |---- without patch (1 dev): XDP_DROP: 3.15% 48.6Mpps XDP_TX: 3.12% 18.3Mpps 18.3Mpps XDP_DROP (RSS): 9.47% 116.5Mpps XDP_TX (RSS): 9.67% 25.3Mpps 24.2Mpps ----------------------- with patch, bond (1 dev): XDP_DROP: 3.14% 46.7Mpps XDP_TX: 3.15% 13.9Mpps 13.9Mpps XDP_DROP (RSS): 10.33% 117.2Mpps XDP_TX (RSS): 10.64% 25.1Mpps 24.0Mpps ----------------------- with patch, bond (2 devs): XDP_DROP: 6.27% 92.7Mpps XDP_TX: 6.26% 17.6Mpps 17.5Mpps XDP_DROP (RSS): 11.38% 117.2Mpps XDP_TX (RSS): 14.30% 28.7Mpps 27.4Mpps -------------------------------------------------------------- RSS: Receive Side Scaling, e.g. the packets were sent to a range of destination IPs. [1]: https://cilium.io/blog/2021/05/20/cilium-110#standalonelb [2]: https://lore.kernel.org/bpf/20210601113236.42651-1-maciej.fijalkowski@intel.com/T/#t [3]: https://lore.kernel.org/bpf/CAHn8xckNXci+X_Eb2WMv4uVYjO2331UWB2JLtXr_58z0Av8+8A@mail.gmail.com/ [4]: https://lore.kernel.org/bpf/20210805230046.28715-1-maciej.fijalkowski@intel.com/T/#t Signed-off-by: Jussi Maki <joamaki@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Cc: Jay Vosburgh <j.vosburgh@gmail.com> Cc: Veaceslav Falico <vfalico@gmail.com> Cc: Andy Gospodarek <andy@greyhouse.net> Cc: Maciej Fijalkowski <maciej.fijalkowski@intel.com> Cc: Magnus Karlsson <magnus.karlsson@intel.com> Link: https://lore.kernel.org/bpf/20210731055738.16820-4-joamaki@gmail.com
2021-08-10net, bonding: Refactor bond_xmit_hash for use with xdp_buffJussi Maki1-57/+90
In preparation for adding XDP support to the bonding driver refactor the packet hashing functions to be able to work with any linear data buffer without an skb. Signed-off-by: Jussi Maki <joamaki@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Cc: Jay Vosburgh <j.vosburgh@gmail.com> Cc: Veaceslav Falico <vfalico@gmail.com> Cc: Andy Gospodarek <andy@greyhouse.net> Link: https://lore.kernel.org/bpf/20210731055738.16820-2-joamaki@gmail.com
2021-08-07net: bonding: bond_alb: Remove the dependency on ipx network layerCai Huoqing1-32/+0
commit <47595e32869f> ("<MAINTAINERS: Mark some staging directories>") indicated the ipx network layer as obsolete in Jan 2018, updated in the MAINTAINERS file now, after being exposed for 3 years to refactoring, so to delete the ipx net layer related code for good. Signed-off-by: Cai Huoqing <caihuoqing@baidu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-03bonding: add new option lacp_activeHangbin Liu6-10/+72
Add an option lacp_active, which is similar with team's runner.active. This option specifies whether to send LACPDU frames periodically. If set on, the LACPDU frames are sent along with the configured lacp_rate setting. If set off, the LACPDU frames acts as "speak when spoken to". Note, the LACPDU state frames still will be sent when init or unbind port. v2: remove module parameter Signed-off-by: Hangbin Liu <liuhangbin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-02bonding: 3ad: fix the concurrency between __bond_release_one() and ↵Yufeng Mo1-1/+2
bond_3ad_state_machine_handler() Some time ago, I reported a calltrace issue "did not find a suitable aggregator", please see[1]. After a period of analysis and reproduction, I find that this problem is caused by concurrency. Before the problem occurs, the bond structure is like follows: bond0 - slaver0(eth0) - agg0.lag_ports -> port0 - port1 \ port0 \ slaver1(eth1) - agg1.lag_ports -> NULL \ port1 If we run 'ifenslave bond0 -d eth1', the process is like below: excuting __bond_release_one() | bond_upper_dev_unlink()[step1] | | | | | bond_3ad_lacpdu_recv() | | ->bond_3ad_rx_indication() | | spin_lock_bh() | | ->ad_rx_machine() | | ->__record_pdu()[step2] | | spin_unlock_bh() | | | | bond_3ad_state_machine_handler() | spin_lock_bh() | ->ad_port_selection_logic() | ->try to find free aggregator[step3] | ->try to find suitable aggregator[step4] | ->did not find a suitable aggregator[step5] | spin_unlock_bh() | | | | bond_3ad_unbind_slave() | spin_lock_bh() spin_unlock_bh() step1: already removed slaver1(eth1) from list, but port1 remains step2: receive a lacpdu and update port0 step3: port0 will be removed from agg0.lag_ports. The struct is "agg0.lag_ports -> port1" now, and agg0 is not free. At the same time, slaver1/agg1 has been removed from the list by step1. So we can't find a free aggregator now. step4: can't find suitable aggregator because of step2 step5: cause a calltrace since port->aggregator is NULL To solve this concurrency problem, put bond_upper_dev_unlink() after bond_3ad_unbind_slave(). In this way, we can invalid the port first and skip this port in bond_3ad_state_machine_handler(). This eliminates the situation that the slaver has been removed from the list but the port is still valid. [1]https://lore.kernel.org/netdev/10374.1611947473@famine/ Signed-off-by: Yufeng Mo <moyufeng@huawei.com> Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-27net: bonding: move ioctl handling to private ndo operationArnd Bergmann1-1/+1
All other user triggered operations are gone from ndo_ioctl, so move the SIOCBOND family into a custom operation as well. The .ndo_ioctl() helper is no longer called by the dev_ioctl.c code now, but there are still a few definitions in obsolete wireless drivers as well as the appletalk and ieee802154 layers to call SIOCSIFADDR/SIOCGIFADDR helpers from inside the kernel. Cc: Jay Vosburgh <j.vosburgh@gmail.com> Cc: Veaceslav Falico <vfalico@gmail.com> Cc: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-27dev_ioctl: split out ndo_eth_ioctlArnd Bergmann1-13/+29
Most users of ndo_do_ioctl are ethernet drivers that implement the MII commands SIOCGMIIPHY/SIOCGMIIREG/SIOCSMIIREG, or hardware timestamping with SIOCSHWTSTAMP/SIOCGHWTSTAMP. Separate these from the few drivers that use ndo_do_ioctl to implement SIOCBOND, SIOCBR and SIOCWANDEV commands. This is a purely cosmetic change intended to help readers find their way through the implementation. Cc: Doug Ledford <dledford@redhat.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jay Vosburgh <j.vosburgh@gmail.com> Cc: Veaceslav Falico <vfalico@gmail.com> Cc: Andy Gospodarek <andy@greyhouse.net> Cc: Andrew Lunn <andrew@lunn.ch> Cc: Vivien Didelot <vivien.didelot@gmail.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Vladimir Oltean <olteanv@gmail.com> Cc: Leon Romanovsky <leon@kernel.org> Cc: linux-rdma@vger.kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-27bonding: use siocdevprivateArnd Bergmann1-6/+24
The bonding driver supports two command codes for each operation: one in the SIOCDEVPRIVATE range and another one with the same definition but a unique command code. Only the second set currently works in compat mode, as the ifr_data expansion overwrites part of the ifr_slave field. Move the private ones into ndo_siocdevprivate and change the implementation to call the other function. This makes both version work correctly. Cc: Jay Vosburgh <j.vosburgh@gmail.com> Cc: Veaceslav Falico <vfalico@gmail.com> Cc: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-17bonding: fix build issueMahesh Bandewar1-0/+2
The commit 9a5605505d9c (" bonding: Add struct bond_ipesc to manage SA") is causing following build error when XFRM is not selected in kernel config. lld: error: undefined symbol: xfrm_dev_state_flush >>> referenced by bond_main.c:3453 (drivers/net/bonding/bond_main.c:3453) >>> net/bonding/bond_main.o:(bond_netdev_event) in archive drivers/built-in.a Fixes: 9a5605505d9c (" bonding: Add struct bond_ipesc to manage SA") Signed-off-by: Mahesh Bandewar <maheshb@google.com> CC: Taehee Yoo <ap420073@gmail.com> CC: Jay Vosburgh <jay.vosburgh@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-06bonding: fix incorrect return value of bond_ipsec_offload_ok()Taehee Yoo1-1/+1
bond_ipsec_offload_ok() is called to check whether the interface supports ipsec offload or not. bonding interface support ipsec offload only in active-backup mode. So, if a bond interface is not in active-backup mode, it should return false but it returns true. Fixes: a3b658cfb664 ("bonding: allow xfrm offload setup post-module-load") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-06bonding: fix suspicious RCU usage in bond_ipsec_offload_ok()Taehee Yoo1-6/+16
To dereference bond->curr_active_slave, it uses rcu_dereference(). But it and the caller doesn't acquire RCU so a warning occurs. So add rcu_read_lock(). Splat looks like: WARNING: suspicious RCU usage 5.13.0-rc6+ #1179 Not tainted drivers/net/bonding/bond_main.c:571 suspicious rcu_dereference_check() usage! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 1 lock held by ping/974: #0: ffff888109e7db70 (sk_lock-AF_INET){+.+.}-{0:0}, at: raw_sendmsg+0x1303/0x2cb0 stack backtrace: CPU: 2 PID: 974 Comm: ping Not tainted 5.13.0-rc6+ #1179 Call Trace: dump_stack+0xa4/0xe5 bond_ipsec_offload_ok+0x1f4/0x260 [bonding] xfrm_output+0x179/0x890 xfrm4_output+0xfa/0x410 ? __xfrm4_output+0x4b0/0x4b0 ? __ip_make_skb+0xecc/0x2030 ? xfrm4_udp_encap_rcv+0x800/0x800 ? ip_local_out+0x21/0x3a0 ip_send_skb+0x37/0xa0 raw_sendmsg+0x1bfd/0x2cb0 Fixes: 18cb261afd7b ("bonding: support hardware encryption offload to slaves") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-06bonding: Add struct bond_ipesc to manage SATaehee Yoo1-20/+119
bonding has been supporting ipsec offload. When SA is added, bonding just passes SA to its own active real interface. But it doesn't manage SA. So, when events(add/del real interface, active real interface change, etc) occur, bonding can't handle that well because It doesn't manage SA. So some problems(panic, UAF, refcnt leak)occur. In order to make it stable, it should manage SA. That's the reason why struct bond_ipsec is added. When a new SA is added to bonding interface, it is stored in the bond_ipsec list. And the SA is passed to a current active real interface. If events occur, it uses bond_ipsec data to handle these events. bond->ipsec_list is protected by bond->ipsec_lock. If a current active real interface is changed, the following logic works. 1. delete all SAs from old active real interface 2. Add all SAs to the new active real interface. 3. If a new active real interface doesn't support ipsec offload or SA's option, it sets real_dev to NULL. Fixes: 18cb261afd7b ("bonding: support hardware encryption offload to slaves") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-06bonding: disallow setting nested bonding + ipsec offloadTaehee Yoo1-6/+9
bonding interface can be nested and it supports ipsec offload. So, it allows setting the nested bonding + ipsec scenario. But code does not support this scenario. So, it should be disallowed. interface graph: bond2 | bond1 | eth0 The nested bonding + ipsec offload may not a real usecase. So, disallowing this scenario is fine. Fixes: 18cb261afd7b ("bonding: support hardware encryption offload to slaves") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-06bonding: fix suspicious RCU usage in bond_ipsec_del_sa()Taehee Yoo1-2/+5
To dereference bond->curr_active_slave, it uses rcu_dereference(). But it and the caller doesn't acquire RCU so a warning occurs. So add rcu_read_lock(). Test commands: ip netns add A ip netns exec A bash modprobe netdevsim echo "1 1" > /sys/bus/netdevsim/new_device ip link add bond0 type bond ip link set eth0 master bond0 ip link set eth0 up ip link set bond0 up ip x s add proto esp dst 14.1.1.1 src 15.1.1.1 spi 0x07 mode \ transport reqid 0x07 replay-window 32 aead 'rfc4106(gcm(aes))' \ 0x44434241343332312423222114131211f4f3f2f1 128 sel src 14.0.0.52/24 \ dst 14.0.0.70/24 proto tcp offload dev bond0 dir in ip x s f Splat looks like: ============================= WARNING: suspicious RCU usage 5.13.0-rc3+ #1168 Not tainted ----------------------------- drivers/net/bonding/bond_main.c:448 suspicious rcu_dereference_check() usage! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 2 locks held by ip/705: #0: ffff888106701780 (&net->xfrm.xfrm_cfg_mutex){+.+.}-{3:3}, at: xfrm_netlink_rcv+0x59/0x80 [xfrm_user] #1: ffff8880075b0098 (&x->lock){+.-.}-{2:2}, at: xfrm_state_delete+0x16/0x30 stack backtrace: CPU: 6 PID: 705 Comm: ip Not tainted 5.13.0-rc3+ #1168 Call Trace: dump_stack+0xa4/0xe5 bond_ipsec_del_sa+0x16a/0x1c0 [bonding] __xfrm_state_delete+0x51f/0x730 xfrm_state_delete+0x1e/0x30 xfrm_state_flush+0x22f/0x390 xfrm_flush_sa+0xd8/0x260 [xfrm_user] ? xfrm_flush_policy+0x290/0x290 [xfrm_user] xfrm_user_rcv_msg+0x331/0x660 [xfrm_user] ? rcu_read_lock_sched_held+0x91/0xc0 ? xfrm_user_state_lookup.constprop.39+0x320/0x320 [xfrm_user] ? find_held_lock+0x3a/0x1c0 ? mutex_lock_io_nested+0x1210/0x1210 ? sched_clock_cpu+0x18/0x170 netlink_rcv_skb+0x121/0x350 [ ... ] Fixes: 18cb261afd7b ("bonding: support hardware encryption offload to slaves") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-06bonding: fix null dereference in bond_ipsec_add_sa()Taehee Yoo1-0/+5
If bond doesn't have real device, bond->curr_active_slave is null. But bond_ipsec_add_sa() dereferences bond->curr_active_slave without null checking. So, null-ptr-deref would occur. Test commands: ip link add bond0 type bond ip link set bond0 up ip x s add proto esp dst 14.1.1.1 src 15.1.1.1 spi \ 0x07 mode transport reqid 0x07 replay-window 32 aead 'rfc4106(gcm(aes))' \ 0x44434241343332312423222114131211f4f3f2f1 128 sel src 14.0.0.52/24 \ dst 14.0.0.70/24 proto tcp offload dev bond0 dir in Splat looks like: KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] CPU: 4 PID: 680 Comm: ip Not tainted 5.13.0-rc3+ #1168 RIP: 0010:bond_ipsec_add_sa+0xc4/0x2e0 [bonding] Code: 85 21 02 00 00 4d 8b a6 48 0c 00 00 e8 75 58 44 ce 85 c0 0f 85 14 01 00 00 48 b8 00 00 00 00 00 fc ff df 4c 89 e2 48 c1 ea 03 <80> 3c 02 00 0f 85 fc 01 00 00 48 8d bb e0 02 00 00 4d 8b 2c 24 48 RSP: 0018:ffff88810946f508 EFLAGS: 00010246 RAX: dffffc0000000000 RBX: ffff88810b4e8040 RCX: 0000000000000001 RDX: 0000000000000000 RSI: ffffffff8fe34280 RDI: ffff888115abe100 RBP: ffff88810946f528 R08: 0000000000000003 R09: fffffbfff2287e11 R10: 0000000000000001 R11: ffff888115abe0c8 R12: 0000000000000000 R13: ffffffffc0aea9a0 R14: ffff88800d7d2000 R15: ffff88810b4e8330 FS: 00007efc5552e680(0000) GS:ffff888119c00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000055c2530dbf40 CR3: 0000000103056004 CR4: 00000000003706e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: xfrm_dev_state_add+0x2a9/0x770 ? memcpy+0x38/0x60 xfrm_add_sa+0x2278/0x3b10 [xfrm_user] ? xfrm_get_policy+0xaa0/0xaa0 [xfrm_user] ? register_lock_class+0x1750/0x1750 xfrm_user_rcv_msg+0x331/0x660 [xfrm_user] ? rcu_read_lock_sched_held+0x91/0xc0 ? xfrm_user_state_lookup.constprop.39+0x320/0x320 [xfrm_user] ? find_held_lock+0x3a/0x1c0 ? mutex_lock_io_nested+0x1210/0x1210 ? sched_clock_cpu+0x18/0x170 netlink_rcv_skb+0x121/0x350 ? xfrm_user_state_lookup.constprop.39+0x320/0x320 [xfrm_user] ? netlink_ack+0x9d0/0x9d0 ? netlink_deliver_tap+0x17c/0xa50 xfrm_netlink_rcv+0x68/0x80 [xfrm_user] netlink_unicast+0x41c/0x610 ? netlink_attachskb+0x710/0x710 netlink_sendmsg+0x6b9/0xb70 [ ...] Fixes: 18cb261afd7b ("bonding: support hardware encryption offload to slaves") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-06bonding: fix suspicious RCU usage in bond_ipsec_add_sa()Taehee Yoo1-1/+6
To dereference bond->curr_active_slave, it uses rcu_dereference(). But it and the caller doesn't acquire RCU so a warning occurs. So add rcu_read_lock(). Test commands: ip link add dummy0 type dummy ip link add bond0 type bond ip link set dummy0 master bond0 ip link set dummy0 up ip link set bond0 up ip x s add proto esp dst 14.1.1.1 src 15.1.1.1 spi 0x07 \ mode transport \ reqid 0x07 replay-window 32 aead 'rfc4106(gcm(aes))' \ 0x44434241343332312423222114131211f4f3f2f1 128 sel \ src 14.0.0.52/24 dst 14.0.0.70/24 proto tcp offload \ dev bond0 dir in Splat looks like: ============================= WARNING: suspicious RCU usage 5.13.0-rc3+ #1168 Not tainted ----------------------------- drivers/net/bonding/bond_main.c:411 suspicious rcu_dereference_check() usage! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 1 lock held by ip/684: #0: ffffffff9a2757c0 (&net->xfrm.xfrm_cfg_mutex){+.+.}-{3:3}, at: xfrm_netlink_rcv+0x59/0x80 [xfrm_user] 55.191733][ T684] stack backtrace: CPU: 0 PID: 684 Comm: ip Not tainted 5.13.0-rc3+ #1168 Call Trace: dump_stack+0xa4/0xe5 bond_ipsec_add_sa+0x18c/0x1f0 [bonding] xfrm_dev_state_add+0x2a9/0x770 ? memcpy+0x38/0x60 xfrm_add_sa+0x2278/0x3b10 [xfrm_user] ? xfrm_get_policy+0xaa0/0xaa0 [xfrm_user] ? register_lock_class+0x1750/0x1750 xfrm_user_rcv_msg+0x331/0x660 [xfrm_user] ? rcu_read_lock_sched_held+0x91/0xc0 ? xfrm_user_state_lookup.constprop.39+0x320/0x320 [xfrm_user] ? find_held_lock+0x3a/0x1c0 ? mutex_lock_io_nested+0x1210/0x1210 ? sched_clock_cpu+0x18/0x170 netlink_rcv_skb+0x121/0x350 ? xfrm_user_state_lookup.constprop.39+0x320/0x320 [xfrm_user] ? netlink_ack+0x9d0/0x9d0 ? netlink_deliver_tap+0x17c/0xa50 xfrm_netlink_rcv+0x68/0x80 [xfrm_user] netlink_unicast+0x41c/0x610 ? netlink_attachskb+0x710/0x710 netlink_sendmsg+0x6b9/0xb70 [ ... ] Fixes: 18cb261afd7b ("bonding: support hardware encryption offload to slaves") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-30Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-0/+8
Trivial conflict in net/netfilter/nf_tables_api.c. Duplicate fix in tools/testing/selftests/net/devlink_port_split.py - take the net-next version. skmsg, and L4 bpf - keep the bpf code but remove the flags and err params. Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-06-23bonding: allow nesting of bonding deviceDi Zhu1-1/+3
The commit 3c9ef511b9fa ("bonding: avoid adding slave device with IFF_MASTER flag") fix a crash when add slave device with IFF_MASTER, but it rejects the scenario of nested bonding device. As Eric Dumazet described: since there indeed is a usage scenario about nesting bonding, we should not break it. So we add a new judgment condition to allow nesting of bonding device. Fixes: 3c9ef511b9fa ("bonding: avoid adding slave device with IFF_MASTER flag") Suggested-by: Jay Vosburgh <jay.vosburgh@canonical.com> Signed-off-by: Di Zhu <zhudi21@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-22bonding: avoid adding slave device with IFF_MASTER flagDi Zhu1-0/+6
The following steps will definitely cause the kernel to crash: ip link add vrf1 type vrf table 1 modprobe bonding.ko max_bonds=1 echo "+vrf1" >/sys/class/net/bond0/bonding/slaves rmmod bonding The root cause is that: When the VRF is added to the slave device, it will fail, and some cleaning work will be done. because VRF device has IFF_MASTER flag, cleanup process will not clear the IFF_BONDING flag. Then, when we unload the bonding module, unregister_netdevice_notifier() will treat the VRF device as a bond master device and treat netdev_priv() as struct bonding{} which actually is struct net_vrf{}. By analyzing the processing logic of bond_enslave(), it seems that it is not allowed to add the slave device with the IFF_MASTER flag, so we need to add a code check for this situation. Signed-off-by: Di Zhu <zhudi21@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-15net: bonding: Use per-cpu rr_tx_counterJussi Maki1-3/+15
The round-robin rr_tx_counter was shared across CPUs leading to significant cache thrashing at high packet rates. This patch switches the round-robin packet counter to use a per-cpu variable to decide the destination slave. On a test with 2x100Gbit ICE nic with pktgen_sample_04_many_flows.sh (-s 64 -t 32) the tx rate was 19.6Mpps before and 22.3Mpps after this patch. "perf top -e cache_misses" before: 12.31% [bonding] [k] bond_xmit_roundrobin_slave_get 10.59% [sch_fq_codel] [k] fq_codel_dequeue 9.34% [kernel] [k] skb_release_data after: 15.42% [sch_fq_codel] [k] fq_codel_dequeue 10.06% [kernel] [k] __memset 9.12% [kernel] [k] skb_release_data Signed-off-by: Jussi Maki <joamaki@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-04bonding: remove redundant initialization of variable retColin Ian King1-1/+1
The variable ret is being initialized with a value that is never read, it is being updated later on. The assignment is redundant and can be removed. Addresses-Coverity: ("Unused value") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-04net: bonding: Use strscpy_pad() instead of manually-truncated strncpy()Kees Cook2-7/+4
Silence this warning by using strscpy_pad() directly: drivers/net/bonding/bond_main.c:4877:3: warning: 'strncpy' specified bound 16 equals destination size [-Wstringop-truncation] 4877 | strncpy(params->primary, primary, IFNAMSIZ); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Additionally replace other strncpy() uses, as it is considered deprecated: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings Reported-by: kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/lkml/202102150705.fdR6obB0-lkp@intel.com Acked-by: Jay Vosburgh <jay.vosburgh@canonical.com> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-05-27Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski1-1/+1
cdc-wdm: s/kill_urbs/poison_urbs/ to fix build Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-05-21net: bonding: bond_alb: Fix some typos in bond_alb.cWang Hai1-4/+4
s/becase/because/ s/reqeusts/requests/ s/funcions/functions/ s/addreses/addresses/ Signed-off-by: Wang Hai <wanghai38@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-29 05:41:09 +0300