Age | Commit message (Collapse) | Author | Files | Lines |
|
git://git.kernel.org/pub/scm/linux/kernel/git/crng/random
Pull more random number generator updates from Jason Donenfeld:
"This time with some large scale treewide cleanups.
The intent of this pull is to clean up the way callers fetch random
integers. The current rules for doing this right are:
- If you want a secure or an insecure random u64, use get_random_u64()
- If you want a secure or an insecure random u32, use get_random_u32()
The old function prandom_u32() has been deprecated for a while
now and is just a wrapper around get_random_u32(). Same for
get_random_int().
- If you want a secure or an insecure random u16, use get_random_u16()
- If you want a secure or an insecure random u8, use get_random_u8()
- If you want secure or insecure random bytes, use get_random_bytes().
The old function prandom_bytes() has been deprecated for a while
now and has long been a wrapper around get_random_bytes()
- If you want a non-uniform random u32, u16, or u8 bounded by a
certain open interval maximum, use prandom_u32_max()
I say "non-uniform", because it doesn't do any rejection sampling
or divisions. Hence, it stays within the prandom_*() namespace, not
the get_random_*() namespace.
I'm currently investigating a "uniform" function for 6.2. We'll see
what comes of that.
By applying these rules uniformly, we get several benefits:
- By using prandom_u32_max() with an upper-bound that the compiler
can prove at compile-time is ≤65536 or ≤256, internally
get_random_u16() or get_random_u8() is used, which wastes fewer
batched random bytes, and hence has higher throughput.
- By using prandom_u32_max() instead of %, when the upper-bound is
not a constant, division is still avoided, because
prandom_u32_max() uses a faster multiplication-based trick instead.
- By using get_random_u16() or get_random_u8() in cases where the
return value is intended to indeed be a u16 or a u8, we waste fewer
batched random bytes, and hence have higher throughput.
This series was originally done by hand while I was on an airplane
without Internet. Later, Kees and I worked on retroactively figuring
out what could be done with Coccinelle and what had to be done
manually, and then we split things up based on that.
So while this touches a lot of files, the actual amount of code that's
hand fiddled is comfortably small"
* tag 'random-6.1-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random:
prandom: remove unused functions
treewide: use get_random_bytes() when possible
treewide: use get_random_u32() when possible
treewide: use get_random_{u8,u16}() when possible, part 2
treewide: use get_random_{u8,u16}() when possible, part 1
treewide: use prandom_u32_max() when possible, part 2
treewide: use prandom_u32_max() when possible, part 1
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs
Pull UBI and UBIFS updates from Richard Weinberger:
"UBI:
- Use bitmap API to allocate bitmaps
- New attach mode, disable_fm, to attach without fastmap
- Fixes for various typos in comments
UBIFS:
- Fix for a deadlock when setting xattrs for encrypted file
- Fix for an assertion failures when truncating encrypted files
- Fixes for various typos in comments"
* tag 'for-linus-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs:
ubi: fastmap: Add fastmap control support for 'UBI_IOCATT' ioctl
ubi: fastmap: Use the bitmap API to allocate bitmaps
ubifs: Fix AA deadlock when setting xattr for encrypted file
ubifs: Fix UBIFS ro fail due to truncate in the encrypted directory
mtd: ubi: drop unexpected word 'a' in comments
ubi: block: Fix typos in comments
ubi: fastmap: Fix typo in comments
ubi: Fix repeated words in comments
ubi: ubi-media.h: Fix comment typo
ubi: block: Remove in vain semicolon
ubifs: Fix ubifs_check_dir_empty() kernel-doc comment
|
|
The prandom_bytes() function has been a deprecated inline wrapper around
get_random_bytes() for several releases now, and compiles down to the
exact same code. Replace the deprecated wrapper with a direct call to
the real function. This was done as a basic find and replace.
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Yury Norov <yury.norov@gmail.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu> # powerpc
Acked-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
Rather than truncate a 32-bit value to a 16-bit value or an 8-bit value,
simply use the get_random_{u8,u16}() functions, which are faster than
wasting the additional bytes from a 32-bit value. This was done by hand,
identifying all of the places where one of the random integer functions
was used in a non-32-bit context.
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Yury Norov <yury.norov@gmail.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Heiko Carstens <hca@linux.ibm.com> # for s390
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
Rather than incurring a division or requesting too many random bytes for
the given range, use the prandom_u32_max() function, which only takes
the minimum required bytes from the RNG and avoids divisions. This was
done mechanically with this coccinelle script:
@basic@
expression E;
type T;
identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32";
typedef u64;
@@
(
- ((T)get_random_u32() % (E))
+ prandom_u32_max(E)
|
- ((T)get_random_u32() & ((E) - 1))
+ prandom_u32_max(E * XXX_MAKE_SURE_E_IS_POW2)
|
- ((u64)(E) * get_random_u32() >> 32)
+ prandom_u32_max(E)
|
- ((T)get_random_u32() & ~PAGE_MASK)
+ prandom_u32_max(PAGE_SIZE)
)
@multi_line@
identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32";
identifier RAND;
expression E;
@@
- RAND = get_random_u32();
... when != RAND
- RAND %= (E);
+ RAND = prandom_u32_max(E);
// Find a potential literal
@literal_mask@
expression LITERAL;
type T;
identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32";
position p;
@@
((T)get_random_u32()@p & (LITERAL))
// Add one to the literal.
@script:python add_one@
literal << literal_mask.LITERAL;
RESULT;
@@
value = None
if literal.startswith('0x'):
value = int(literal, 16)
elif literal[0] in '123456789':
value = int(literal, 10)
if value is None:
print("I don't know how to handle %s" % (literal))
cocci.include_match(False)
elif value == 2**32 - 1 or value == 2**31 - 1 or value == 2**24 - 1 or value == 2**16 - 1 or value == 2**8 - 1:
print("Skipping 0x%x for cleanup elsewhere" % (value))
cocci.include_match(False)
elif value & (value + 1) != 0:
print("Skipping 0x%x because it's not a power of two minus one" % (value))
cocci.include_match(False)
elif literal.startswith('0x'):
coccinelle.RESULT = cocci.make_expr("0x%x" % (value + 1))
else:
coccinelle.RESULT = cocci.make_expr("%d" % (value + 1))
// Replace the literal mask with the calculated result.
@plus_one@
expression literal_mask.LITERAL;
position literal_mask.p;
expression add_one.RESULT;
identifier FUNC;
@@
- (FUNC()@p & (LITERAL))
+ prandom_u32_max(RESULT)
@collapse_ret@
type T;
identifier VAR;
expression E;
@@
{
- T VAR;
- VAR = (E);
- return VAR;
+ return E;
}
@drop_var@
type T;
identifier VAR;
@@
{
- T VAR;
... when != VAR
}
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Yury Norov <yury.norov@gmail.com>
Reviewed-by: KP Singh <kpsingh@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz> # for ext4 and sbitmap
Reviewed-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com> # for drbd
Acked-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Heiko Carstens <hca@linux.ibm.com> # for s390
Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # for mmc
Acked-by: Darrick J. Wong <djwong@kernel.org> # for xfs
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc and other driver updates from Greg KH:
"Here is the large set of char/misc and other small driver subsystem
changes for 6.1-rc1. Loads of different things in here:
- IIO driver updates, additions, and changes. Probably the largest
part of the diffstat
- habanalabs driver update with support for new hardware and
features, the second largest part of the diff.
- fpga subsystem driver updates and additions
- mhi subsystem updates
- Coresight driver updates
- gnss subsystem updates
- extcon driver updates
- icc subsystem updates
- fsi subsystem updates
- nvmem subsystem and driver updates
- misc driver updates
- speakup driver additions for new features
- lots of tiny driver updates and cleanups
All of these have been in the linux-next tree for a while with no
reported issues"
* tag 'char-misc-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (411 commits)
w1: Split memcpy() of struct cn_msg flexible array
spmi: pmic-arb: increase SPMI transaction timeout delay
spmi: pmic-arb: block access for invalid PMIC arbiter v5 SPMI writes
spmi: pmic-arb: correct duplicate APID to PPID mapping logic
spmi: pmic-arb: add support to dispatch interrupt based on IRQ status
spmi: pmic-arb: check apid against limits before calling irq handler
spmi: pmic-arb: do not ack and clear peripheral interrupts in cleanup_irq
spmi: pmic-arb: handle spurious interrupt
spmi: pmic-arb: add a print in cleanup_irq
drivers: spmi: Directly use ida_alloc()/free()
MAINTAINERS: add TI ECAP driver info
counter: ti-ecap-capture: capture driver support for ECAP
Documentation: ABI: sysfs-bus-counter: add frequency & num_overflows items
dt-bindings: counter: add ti,am62-ecap-capture.yaml
counter: Introduce the COUNTER_COMP_ARRAY component type
counter: Consolidate Counter extension sysfs attribute creation
counter: Introduce the Count capture component
counter: 104-quad-8: Add Signal polarity component
counter: Introduce the Signal polarity component
counter: interrupt-cnt: Implement watch_validate callback
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux
Pull MTD updates from Miquel Raynal:
"Core MTD changes:
- mtdchar: add MEMREAD ioctl
- Add ECC error accounting for each read request
- always initialize 'stats' in struct mtd_oob_ops
- Track maximum number of bitflips for each read request
- Fix repeated word in comment
- Move from strlcpy with unused retval to strscpy
- Fix a typo in a comment
- Add binding for U-Boot bootloader partitions
MTD device drivers changes:
- FTL: use container_of() rather than cast
- docg3:
- Use correct function names in comment blocks
- Check the return value of devm_ioremap() in the probe
- physmap-core: Fix NULL pointer dereferencing in
of_select_probe_type()
- parsers: add Broadcom's U-Boot parser
Raw NAND core changes:
- Replace of_gpio_named_count() by gpiod_count()
- Remove misguided comment of nand_get_device()
- bbt: Use the bitmap API to allocate bitmaps
Raw NAND controller drivers changes:
- Meson:
- Stop supporting legacy clocks
- Refine resource getting in probe
- Convert bindings to yaml
- Fix clock handling and update the bindings accordingly
- Fix bit map use in meson_nfc_ecc_correct()
- bcm47xx:
- Fix spelling typo in comment
- STM32 FMC2:
- Switch to using devm_fwnode_gpiod_get()
- Fix dma_map_sg error check
- Cadence:
- Remove an unneeded result variable
- Marvell:
- Fix error handle regarding dma_map_sg
- Orion:
- Use devm_clk_get_optional()
- Cafe:
- Use correct function name in comment block
- Atmel:
- Unmap streaming DMA mappings
- Arasan:
- Stop using 0 as NULL pointer
- GPMI:
- Fix typo 'the the' in comment
- BRCM:
- Add individual glue driver selection
- Move Kconfig to driver folder
- FSL: Fix none ECC mode
- Intel:
- Use devm_platform_ioremap_resource_byname()
- Remove unused clk_rate member from struct ebu_nand
- Remove unused nand_pa member from ebu_nand_cs
- Don't re-define NAND_DATA_IFACE_CHECK_ONLY
- Remove undocumented compatible string
- Fix compatible string in the bindings
- Read the chip-select line from the correct OF node
- Fix maximum chip select value in the bindings"
* tag 'mtd/for-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (43 commits)
mtd: rawnand: meson: stop supporting legacy clocks
dt-bindings: nand: meson: convert txt to yaml
mtd: rawnand: meson: refine resource getting in probe
mtd: rawnand: meson: fix the clock
dt-bindings: nand: meson: fix meson nfc clock
mtd: rawnand: bcm47xx: fix spelling typo in comment
mtd: rawnand: stm32_fmc2: switch to using devm_fwnode_gpiod_get()
mtd: rawnand: cadence: Remove an unneeded result variable
mtd: rawnand: Replace of_gpio_named_count() by gpiod_count()
mtd: rawnand: marvell: Fix error handle regarding dma_map_sg
mtd: rawnand: stm32_fmc2: Fix dma_map_sg error check
mtd: rawnand: remove misguided comment of nand_get_device()
mtd: rawnand: orion: Use devm_clk_get_optional()
mtd: rawnand: cafe: Use correct function name in comment block
mtd: rawnand: atmel: Unmap streaming DMA mappings
mtd: rawnand: meson: fix bit map use in meson_nfc_ecc_correct()
mtd: rawnand: arasan: stop using 0 as NULL pointer
mtd: rawnand: gpmi: Fix typo 'the the' in comment
mtd: rawnand: brcmnand: Add individual glue driver selection
mtd: rawnand: brcmnand: Move Kconfig to driver folder
...
|
|
Raw NAND core changes:
* Replace of_gpio_named_count() by gpiod_count()
- Remove misguided comment of nand_get_device()
- bbt: Use the bitmap API to allocate bitmaps
Raw NAND controller drivers changes:
* Meson:
- Stop supporting legacy clocks
- Refine resource getting in probe
- Convert bindings to yaml
- Fix clock handling and update the bindings accordingly
- Fix bit map use in meson_nfc_ecc_correct()
* bcm47xx:
- Fix spelling typo in comment
* STM32 FMC2:
- Switch to using devm_fwnode_gpiod_get()
- Fix dma_map_sg error check
* Cadence:
- Remove an unneeded result variable
* Marvell:
- Fix error handle regarding dma_map_sg
* Orion:
- Use devm_clk_get_optional()
* Cafe:
- Use correct function name in comment block
* Atmel:
- Unmap streaming DMA mappings
* Arasan:
- Stop using 0 as NULL pointer
* GPMI:
- Fix typo 'the the' in comment
* BRCM:
- Add individual glue driver selection
- Move Kconfig to driver folder
* FSL: Fix none ECC mode
* Intel:
- Use devm_platform_ioremap_resource_byname()
- Remove unused clk_rate member from struct ebu_nand
- Remove unused nand_pa member from ebu_nand_cs
- Don't re-define NAND_DATA_IFACE_CHECK_ONLY
- Remove undocumented compatible string
- Fix compatible string in the bindings
- Read the chip-select line from the correct OF node
- Fix maximum chip select value in the bindings
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM driver updates from Arnd Bergmann:
"The drivers branch for 6.1 is a bit larger than for most releases.
Most of the changes come from SoC maintainers for the drivers/soc
subsystem:
- A new driver for error handling on the NVIDIA Tegra 'control
backbone' bus.
- A new driver for Qualcomm LLCC/DDR bandwidth measurement
- New Rockchip rv1126 and rk3588 power domain drivers
- DT binding updates for memory controllers, older Rockchip SoCs,
various Mediatek devices, Qualcomm SCM firmware
- Minor updates to Hisilicon LPC bus, the Allwinner SRAM driver, the
Apple rtkit firmware driver, Tegra firmware
- Minor updates for SoC drivers (Samsung, Mediatek, Renesas, Tegra,
Qualcomm, Broadcom, NXP, ...)
There are also some separate subsystem with downstream maintainers
that merge updates this way:
- Various updates and new drivers in the memory controller subsystem
for Mediatek and Broadcom SoCs
- Small set of changes in preparation to add support for FF-A v1.1
specification later, in the Arm FF-A firmware subsystem
- debugfs support in the PSCI firmware subsystem"
* tag 'arm-drivers-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (149 commits)
ARM: remove check for CONFIG_DEBUG_LL_SER3
firmware/psci: Add debugfs support to ease debugging
firmware/psci: Print a warning if PSCI doesn't accept PC mode
dt-bindings: memory: snps,dw-umctl2-ddrc: Extend schema with IRQs/resets/clocks props
dt-bindings: memory: snps,dw-umctl2-ddrc: Replace opencoded numbers with macros
dt-bindings: memory: snps,dw-umctl2-ddrc: Use more descriptive device name
dt-bindings: memory: synopsys,ddrc-ecc: Detach Zynq DDRC controller support
soc: sunxi: sram: Add support for the D1 system control
soc: sunxi: sram: Export the LDO control register
soc: sunxi: sram: Save a pointer to the OF match data
soc: sunxi: sram: Return void from the release function
soc: apple: rtkit: Add apple_rtkit_poll
soc: imx: add i.MX93 media blk ctrl driver
soc: imx: add i.MX93 SRC power domain driver
soc: imx: imx8m-blk-ctrl: Use genpd_xlate_onecell
soc: imx: imx8mp-blk-ctrl: handle PCIe PHY resets
soc: imx: imx8m-blk-ctrl: add i.MX8MP VPU blk ctrl
soc: imx: add i.MX8MP HDMI blk ctrl HDCP/HRV_MWR
soc: imx: add icc paths for i.MX8MP hsio/hdmi blk ctrl
soc: imx: add icc paths for i.MX8MP media blk ctrl
...
|
|
MTD subsystem API allows interacting with MTD devices (e.g. reading,
writing, handling bad blocks). So far a random driver could get MTD
device only by its name (get_mtd_device_nm()). This change allows
getting them also by a DT node.
This API is required for drivers handling DT defined MTD partitions in a
specific way (e.g. U-Boot (sub)partition with environment variables).
Acked-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20220916122100.170016-3-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[1] suggests that fastmap is suitable for large flash devices. Module
parameter 'fm_autoconvert' is a coarse grained switch to enable all
ubi devices to generate fastmap, which may turn on fastmap even for
small flash devices.
This patch imports a new field 'disable_fm' in struct 'ubi_attach_req'
to support following situations by ioctl 'UBI_IOCATT'.
[old functions]
A. Disable 'fm_autoconvert': Disbable fastmap for all ubi devices
B. Enable 'fm_autoconvert': Enable fastmap for all ubi devices
[new function]
C. Enable 'fm_autoconvert', set 'disable_fm' for given device: Don't
create new fastmap and do full scan (existed fastmap will be
destroyed) for the given ubi device.
A simple test case in [2].
[1] http://www.linux-mtd.infradead.org/doc/ubi.html#L_fastmap
[2] https://bugzilla.kernel.org/show_bug.cgi?id=216278
Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
|
|
Use bitmap_zalloc()/bitmap_free() instead of hand-writing them.
It is less verbose and it improves the semantic.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
|
|
there is an unexpected word 'a' in the comments that need to be dropped
file - drivers/mtd/ubi/vmt.c
line - 626,779
* Returns zero if volume is all right and a a negative error code if not.
changed to:
* Returns zero if volume is all right and a negative error code if not.
Signed-off-by: Jiang Jian <jiangjian@cdjrlc.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
|
|
Various spelling mistakes in comments.
Detected with the help of Coccinelle.
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Signed-off-by: Richard Weinberger <richard@nod.at>
|
|
There are a typo(dont't) in comments.
Fix it.
Signed-off-by: Zhang Jiaming <jiaming@nfschina.com>
Reviewed-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
|
|
Delete the redundant word 'a'.
Delete the redundant word 'the'.
Signed-off-by: Jilin Yuan <yuanjilin@cdjrlc.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
|
|
The double `the' is duplicated in the comment, remove one.
Signed-off-by: Jason Wang <wangborong@cdjrlc.com>
Reviewed-by: Zhihao Cheng <chengzhihao1@huawei.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
|
|
Remove the repeated ';' from code, it is not
needed.
Signed-off-by: Li zeming <zeming@nfschina.com>
Reviewed-by: Zhihao Cheng <chengzhihao1@huawei.com>
[rw: Massaged commit message a bit]
Signed-off-by: Richard Weinberger <richard@nod.at>
|
|
meson NFC driver only uses common clock interfaces, which triggers kernel test
robot errors when using legacy clocks with HAVE_LEGACY_CLK on.
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Liang Yang <liang.yang@amlogic.com>
[miquel.raynal@bootlin.com: Rephrase the commit log]
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20220907080405.28240-6-liang.yang@amlogic.com
|
|
simply use devm_platform_ioremap_resource_byname() instead of two steps:
res = platform_get_resource(pdev, IORESOURCE_MEM, 0) and
reg_base = devm_ioremap_resource(dev, res)
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Liang Yang <liang.yang@amlogic.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20220907080405.28240-4-liang.yang@amlogic.com
|
|
EMMC and NAND have the same clock control register named 'SD_EMMC_CLOCK'
which is defined in EMMC port internally. bit0~5 of 'SD_EMMC_CLOCK' is
the divider and bit6~7 is the mux for fix pll and xtal. At the beginning,
a common MMC and NAND sub-clock was discussed and planed to be implemented
as NFC clock provider, but now this series of patches of a common MMC and
NAND sub-clock are never being accepted. the reasons for giving up are:
1. EMMC and NAND, which are mutually exclusive anyway
2. coupling the EMMC and NAND.
3. it seems that a common MMC and NAND sub-clock is over engineered.
and let us see the link fot more information:
https://lore.kernel.org/all/20220121074508.42168-5-liang.yang@amlogic.com
so The meson nfc can't work now, let us rework the clock.
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Liang Yang <liang.yang@amlogic.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20220907080405.28240-3-liang.yang@amlogic.com
|
|
Fix spelling typo in comment.
Reported-by: k2ci <kernel-bot@kylinos.cn>
Signed-off-by: Jiangshan Yi <yijiangshan@kylinos.cn>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20220905063232.1830197-1-13667453960@163.com
|
|
I would like to stop exporting OF-specific devm_gpiod_get_from_of_node()
so that gpiolib can be cleaned a bit, so let's switch to the generic
fwnode property API.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20220903-gpiod_get_from_of_node-remove-v1-3-b29adfb27a6c@gmail.com
|
|
Return the value cadence_nand_set_access_width16() directly instead of
storing it in another redundant variable.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: ye xingchen <ye.xingchen@zte.com.cn>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20220901074555.313266-1-ye.xingchen@zte.com.cn
|
|
As a preparation to unexport of_gpio_named_count(), convert the
driver to use gpiod_count() instead.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20220830183336.49966-1-andriy.shevchenko@linux.intel.com
|
|
dma_map_sg return 0 on error, in case of error return -EIO,
also add the dma_unmap_sg as rollback on the following error.
Cc: Miquel Raynal <miquel.raynal@bootlin.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Vignesh Raghavendra <vigneshr@ti.com>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: Christophe Kerello <christophe.kerello@foss.st.com>
Cc: Cai Huoqing <cai.huoqing@linux.dev>
Cc: linux-mtd@lists.infradead.org
Cc: linux-stm32@st-md-mailman.stormreply.com
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20220819060801.10443-6-jinpu.wang@ionos.com
|
|
dma_map_sg return 0 on error, in case of error return -EIO.
Cc: Miquel Raynal <miquel.raynal@bootlin.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Vignesh Raghavendra <vigneshr@ti.com>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: Philipp Zabel <p.zabel@pengutronix.de>
Cc: Christophe Kerello <christophe.kerello@foss.st.com>
Cc: Cai Huoqing <cai.huoqing@linux.dev>
Cc: linux-mtd@lists.infradead.org
Cc: linux-stm32@st-md-mailman.stormreply.com
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Jack Wang <jinpu.wang@ionos.com>
Reviewed-by: Christophe Kerello <christophe.kerello@foss.st.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20220819060801.10443-5-jinpu.wang@ionos.com
|
|
After commit 8cba323437a4 ("mtd: rawnand: protect access to rawnand devices
while in suspend"), it will wait while in suspend rather than returning
errors. So remove the misguided comment about return value.
Signed-off-by: ChenXiaoSong <chenxiaosong2@huawei.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20220819021846.2924539-1-chenxiaosong2@huawei.com
|
|
Use devm_clk_get_optional() instead of hand writing it.
While at it, use dev_err_probe() to further simplify the code. This is also
less verbose if clk_get() returns -EPROBE_DEFER.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/a5bde48e3e1165dd65d1d1c1739e03ace1bef5d3.1659907229.git.christophe.jaillet@wanadoo.fr
|
|
The incorrect function name is being used in the comment for function
cafe_nand_read_page. Correct it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20220805180117.2375503-1-colin.i.king@gmail.com
|
|
Every dma_map_single() call should have its dma_unmap_single() counterpart,
because the DMA address space is a shared resource and one could render the
machine unusable by consuming all DMA addresses.
Link: https://lore.kernel.org/lkml/13c6c9a2-6db5-c3bf-349b-4c127ad3496a@axentia.se/
Cc: stable@vger.kernel.org
Fixes: f88fc122cc34 ("mtd: nand: Cleanup/rework the atmel_nand driver")
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Acked-by: Alexander Dahl <ada@thorsis.com>
Reported-by: Peter Rosin <peda@axentia.se>
Tested-by: Alexander Dahl <ada@thorsis.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Tested-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20220728074014.145406-1-tudor.ambarus@microchip.com
|
|
The meson_nfc_ecc_correct() function accidentally does a right shift
instead of a left shift so it only works for BIT(0). Also use
BIT_ULL() because "correct_bitmap" is a u64 and we want to avoid
shift wrapping bugs.
Fixes: 8fae856c5350 ("mtd: rawnand: meson: add support for Amlogic NAND flash controller")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Liang Yang <liang.yang@amlogic.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/YuI2zF1hP65+LE7r@kili
|
|
Fix the following sparse warnings:
drivers/mtd/nand/raw/arasan-nand-controller.c:918:70: warning: Using plain integer as NULL pointer
drivers/mtd/nand/raw/arasan-nand-controller.c:918:73: warning: Using plain integer as NULL pointer
Signed-off-by: GONG, Ruiqi <gongruiqi1@huawei.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20220725112108.686347-1-gongruiqi1@huawei.com
|
|
Replace 'the the' with 'the' in the comment.
Signed-off-by: Slark Xiao <slark_xiao@163.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20220722072850.72797-1-slark_xiao@163.com
|
|
Allow each platform to define a dedicated Kconfig entry for its glue
driver such that we can decide on a per-platfomr basis whether to build
it or not. This allows for a finer grained control over the resulting
kernel image or set of modules.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20220711222323.4048197-3-f.fainelli@gmail.com
|
|
In preparation for allowing each of the brcmnand stub to be built
separately, move the Kconfig entry to the driver folder.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20220711222323.4048197-2-f.fainelli@gmail.com
|
|
User-space applications making use of MTD devices via /dev/mtd*
character devices currently have limited capabilities for reading data:
- only deprecated methods of accessing OOB layout information exist,
- there is no way to explicitly specify MTD operation mode to use; it
is auto-selected based on the MTD file mode (MTD_FILE_MODE_*) set
for the character device; in particular, this prevents using
MTD_OPS_AUTO_OOB for reads,
- all existing user-space interfaces which cause mtd_read() or
mtd_read_oob() to be called (via mtdchar_read() and
mtdchar_read_oob(), respectively) return success even when those
functions return -EUCLEAN or -EBADMSG; this renders user-space
applications using these interfaces unaware of any corrected
bitflips or uncorrectable ECC errors detected during reads.
Note that the existing MEMWRITE ioctl allows the MTD operation mode to
be explicitly set, allowing user-space applications to write page data
and OOB data without requiring them to know anything about the OOB
layout of the MTD device they are writing to (MTD_OPS_AUTO_OOB). Also,
the MEMWRITE ioctl does not mangle the return value of mtd_write_oob().
Add a new ioctl, MEMREAD, which addresses the above issues. It is
intended to be a read-side counterpart of the existing MEMWRITE ioctl.
Similarly to the latter, the read operation is performed in a loop which
processes at most mtd->erasesize bytes in each iteration. This is done
to prevent unbounded memory allocations caused by calling kmalloc() with
the 'size' argument taken directly from the struct mtd_read_req provided
by user space. However, the new ioctl is implemented so that the values
it returns match those that would have been returned if just a single
mtd_read_oob() call was issued to handle the entire read operation in
one go.
Note that while just returning -EUCLEAN or -EBADMSG to user space would
already be a valid and useful indication of the ECC algorithm detecting
errors during a read operation, that signal would not be granular enough
to cover all use cases. For example, knowing the maximum number of
bitflips detected in a single ECC step during a read operation performed
on a given page may be useful when dealing with an MTD partition whose
ECC layout varies across pages (e.g. a partition consisting of a
bootloader area using a "custom" ECC layout followed by data pages using
a "standard" ECC layout). To address that, include ECC statistics in
the structure returned to user space by the new MEMREAD ioctl.
Link: https://www.infradead.org/pipermail/linux-mtd/2016-April/067085.html
Suggested-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Michał Kępień <kernel@kempniu.pl>
Acked-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20220629125737.14418-5-kernel@kempniu.pl
|
|
Extend struct mtd_req_stats with two new fields holding the number of
corrected bitflips and uncorrectable errors detected during a read
operation. This is a prerequisite for ultimately passing those counters
to user space, where they can be useful to applications for making
better-informed choices about moving data around.
Unlike 'max_bitflips' (which is set - in a common code path - to the
return value of a function called while the MTD device's mutex is held),
these counters have to be maintained in each MTD driver which defines
the '_read_oob' callback because the statistics need to be calculated
while the MTD device's mutex is held.
Suggested-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Michał Kępień <kernel@kempniu.pl>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20220629125737.14418-4-kernel@kempniu.pl
|
|
As the 'stats' field in struct mtd_oob_ops is used in conditional
expressions, ensure it is always zero-initialized in all such structures
to prevent random stack garbage from being interpreted as a pointer.
Strictly speaking, this problem currently only needs to be fixed for
struct mtd_oob_ops structures subsequently passed to mtd_read_oob().
However, this commit goes a step further and makes all instances of
struct mtd_oob_ops in the tree zero-initialized, in hope of preventing
future problems, e.g. if struct mtd_req_stats gets extended with write
statistics at some point.
Signed-off-by: Michał Kępień <kernel@kempniu.pl>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20220629125737.14418-3-kernel@kempniu.pl
|
|
mtd_read_oob() callers are currently oblivious to the details of ECC
errors detected during the read operation - they only learn (through the
return value) whether any corrected bitflips or uncorrectable errors
occurred. More detailed ECC information can be useful to user-space
applications for making better-informed choices about moving data
around.
Extend struct mtd_oob_ops with a pointer to a newly-introduced struct
mtd_req_stats and set its 'max_bitflips' field to the maximum number of
bitflips found in a single ECC step during the read operation performed
by mtd_read_oob(). This is a prerequisite for ultimately passing that
value back to user space.
Suggested-by: Boris Brezillon <boris.brezillon@collabora.com>
Signed-off-by: Michał Kępień <kernel@kempniu.pl>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20220629125737.14418-2-kernel@kempniu.pl
|
|
Delete the redundant word 'in'.
Signed-off-by: wangjianli <wangjianli@cdjrlc.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20220908122229.10814-1-wangjianli@cdjrlc.com
|
|
Commit f6424c22aa36 ("mtd: rawnand: fsl_elbc: Make SW ECC work") added
support for specifying ECC mode via DTS and skipping autodetection.
But it broke explicit specification of HW ECC mode in DTS as correct
settings for HW ECC mode are applied only when NONE mode or nothing was
specified in DTS file.
Also it started aliasing NONE mode to be same as when ECC mode was not
specified and disallowed usage of ON_DIE mode.
Fix all these issues. Use autodetection of ECC mode only in case when mode
was really not specified in DTS file by checking that ecc value is invalid.
Set HW ECC settings either when HW ECC was specified in DTS or it was
autodetected. And do not fail when ON_DIE mode is set.
Fixes: f6424c22aa36 ("mtd: rawnand: fsl_elbc: Make SW ECC work")
Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Marek Behún <kabel@kernel.org>
Reviewed-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20220707184328.3845-1-pali@kernel.org
|
|
Use bitmap_zalloc()/bitmap_free() instead of hand-writing them.
It is less verbose and it improves the semantic.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/b18c2b6711b8930f0dfb8318b5d19ef6e41f0f9a.1656864573.git.christophe.jaillet@wanadoo.fr
|
|
Switch from open-coded platform_get_resource_byname() and
devm_ioremap_resource() to devm_platform_ioremap_resource_byname() where
possible to simplify the code.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20220702231227.1579176-9-martin.blumenstingl@googlemail.com
|
|
The clk_rate member from struct ebu_nand is only written but never read.
Remove this unused and unneeded member.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20220702231227.1579176-8-martin.blumenstingl@googlemail.com
|
|
The nand_pa member from struct ebu_nand_cs is only written but never
read. Remove this unused and unneeded member.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20220702231227.1579176-7-martin.blumenstingl@googlemail.com
|
|
NAND_DATA_IFACE_CHECK_ONLY is already defined in
include/linux/mtd/rawnand.h which is also included by the driver. Drop
the re-definition from the intel-nand-controller driver.
Fixes: 0b1039f016e8a3 ("mtd: rawnand: Add NAND controller support on Intel LGM SoC")
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20220702231227.1579176-6-martin.blumenstingl@googlemail.com
|
|
The "intel,nand-controller" compatible string is not part of the
dt-bindings. Remove it from the driver as it's not supposed to be used
without any documentation for it.
Fixes: 0b1039f016e8a3 ("mtd: rawnand: Add NAND controller support on Intel LGM SoC")
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20220702231227.1579176-5-martin.blumenstingl@googlemail.com
|
|
The chip select has to be read from the flash node which is a child node
of the NAND controller.
Fixes: 0b1039f016e8a3 ("mtd: rawnand: Add NAND controller support on Intel LGM SoC")
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20220702231227.1579176-4-martin.blumenstingl@googlemail.com
|
|
Follow the advice of the below link and prefer 'strscpy' in this
subsystem. Conversion is 1:1 because the return value is not used.
Generated by a coccinelle script.
Link: https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/linux-mtd/20220818210033.7084-1-wsa+renesas@sang-engineering.com
|