summaryrefslogtreecommitdiff
path: root/drivers/mtd
AgeCommit message (Collapse)AuthorFilesLines
2018-04-12Merge tag 'tags/upstream-4.17-rc1' of git://git.infradead.org/linux-ubifsLinus Torvalds3-2/+12
Pull UBI and UBIFS updates from Richard Weinberger: "Minor bug fixes and improvements" * tag 'tags/upstream-4.17-rc1' of git://git.infradead.org/linux-ubifs: ubi: Reject MLC NAND ubifs: Remove useless parameter of lpt_heap_replace ubifs: Constify struct ubifs_lprops in scan_for_leb_for_idx ubifs: remove unnecessary assignment ubi: Fix error for write access ubi: fastmap: Don't flush fastmap work on detach ubifs: Check ubifs_wbuf_sync() return code
2018-04-06Merge tag 'mtd/for-4.17' of git://git.infradead.org/linux-mtdLinus Torvalds149-4214/+2836
Pull MTD updates from Boris Brezillon: "MTD Core: - Remove support for asynchronous erase (not implemented by any of the existing drivers anyway) - Remove Cyrille from the list of SPI NOR and MTD maintainers - Fix kernel doc headers - Allow users to define the partitions parsers they want to test through a DT property (compatible of the partitions subnode) - Remove the bfin-async-flash driver (the only architecture using it has been removed) - Fix pagetest test - Add extra checks in mtd_erase() - Simplify the MTD partition creation logic and get rid of mtd_add_device_partitions() MTD Drivers: - Add endianness information to the physmap DT binding - Add Eon EN29LV400A IDs to JEDEC probe logic - Use %*ph where appropriate SPI NOR Drivers: - Make fsl-quaspi assign different names to MTD devices connected to the same QSPI controller - Remove an unneeded driver.bus assigned in the fsl-qspi driver NAND Core: - Prepare arrival of the SPI NAND subsystem by implementing a generic (interface-agnostic) layer to ease manipulation of NAND devices - Move onenand code base to the drivers/mtd/nand/ dir - Rework timing mode selection - Provide a generic way for NAND chip drivers to flag a specific GET/SET FEATURE operation as supported/unsupported - Stop embedding ONFI/JEDEC param page in nand_chip NAND Drivers: - Rework/cleanup of the mxc driver - Various cleanups in the vf610 driver - Migrate the fsmc and vf610 to ->exec_op() - Get rid of the pxa driver (replaced by marvell_nand) - Support ->setup_data_interface() in the GPMI driver - Fix probe error path in several drivers - Remove support for unused hw_syndrome mode in sunxi_nand - Various minor improvements" * tag 'mtd/for-4.17' of git://git.infradead.org/linux-mtd: (89 commits) dt-bindings: fsl-quadspi: Add the example of two SPI NOR mtd: fsl-quadspi: Distinguish the mtd device names mtd: nand: Fix some function description mismatches in core.c mtd: fsl-quadspi: Remove unneeded driver.bus assignment mtd: rawnand: marvell: Rename ->ecc_clk into ->core_clk mtd: rawnand: s3c2410: enhance the probe function error path mtd: rawnand: tango: fix probe function error path mtd: rawnand: sh_flctl: fix the probe function error path mtd: rawnand: omap2: fix the probe function error path mtd: rawnand: mxc: fix probe function error path mtd: rawnand: denali: fix probe function error path mtd: rawnand: davinci: fix probe function error path mtd: rawnand: cafe: fix probe function error path mtd: rawnand: brcmnand: fix probe function error path mtd: rawnand: sunxi: Stop supporting ECC_HW_SYNDROME mode mtd: rawnand: marvell: Fix clock resource by adding a register clock mtd: ftl: Use DIV_ROUND_UP() mtd: Fix some function description mismatches in mtdcore.c mtd: physmap_of: update struct map_info's swap as per map requirement dt-bindings: mtd-physmap: Add endianness supports ...
2018-04-06Merge tag 'armsoc-soc' of ↵Linus Torvalds4-2119/+1
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC platform updates from Arnd Bergmann: "This release brings up a new platform based on the old ARM9 core: the Nuvoton NPCM is used as a baseboard management controller, competing with the better known ASpeed AST2xx series. Another important change is the addition of ARMv7-A based chips in mach-stm32. The older parts in this platform are ARMv7-M based microcontrollers, now they are expanding to general-purpose workloads. The other changes are the usual defconfig updates to enable additional drivers, lesser bugfixes. The largest updates as often are the ongoing OMAP cleanups, but we also have a number of changes for the older PXA and davinci platforms this time. For the Renesas shmobile/r-car platform, some new infrastructure is needed to make the watchdog work correctly. Supporting Multiprocessing on Allwinner A80 required a significant amount of new code, but is not doing anything unexpected" * tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (179 commits) arm: npcm: modify configuration for the NPCM7xx BMC. MAINTAINERS: update entry for ARM/berlin ARM: omap2: fix am43xx build without L2X0 ARM: davinci: da8xx: simplify CFGCHIP regmap_config ARM: davinci: da8xx: fix oops in USB PHY driver due to stack allocated platform_data ARM: multi_v7_defconfig: add NXP FlexCAN IP support ARM: multi_v7_defconfig: enable thermal driver for i.MX devices ARM: multi_v7_defconfig: add RN5T618 PMIC family support ARM: multi_v7_defconfig: add NXP graphics drivers ARM: multi_v7_defconfig: add GPMI NAND controller support ARM: multi_v7_defconfig: add OCOTP driver for NXP SoCs ARM: multi_v7_defconfig: configure I2C driver built-in arm64: defconfig: add CONFIG_UNIPHIER_THERMAL and CONFIG_SNI_AVE ARM: imx: fix imx6sll-only build ARM: imx: select ARM_CPU_SUSPEND for CPU_IDLE as well ARM: mxs_defconfig: Re-sync defconfig ARM: imx_v4_v5_defconfig: Use the generic fsl-asoc-card driver ARM: imx_v4_v5_defconfig: Re-sync defconfig arm64: defconfig: enable stmmac ethernet to defconfig ARM: EXYNOS: Simplify code in coupled CPU idle hot path ...
2018-04-06Merge tag 'for-4.17/block-20180402' of git://git.kernel.dk/linux-blockLinus Torvalds1-3/+3
Pull block layer updates from Jens Axboe: "It's a pretty quiet round this time, which is nice. This contains: - series from Bart, cleaning up the way we set/test/clear atomic queue flags. - series from Bart, fixing races between gendisk and queue registration and removal. - set of bcache fixes and improvements from various folks, by way of Michael Lyle. - set of lightnvm updates from Matias, most of it being the 1.2 to 2.0 transition. - removal of unused DIO flags from Nikolay. - blk-mq/sbitmap memory ordering fixes from Omar. - divide-by-zero fix for BFQ from Paolo. - minor documentation patches from Randy. - timeout fix from Tejun. - Alpha "can't write a char atomically" fix from Mikulas. - set of NVMe fixes by way of Keith. - bsg and bsg-lib improvements from Christoph. - a few sed-opal fixes from Jonas. - cdrom check-disk-change deadlock fix from Maurizio. - various little fixes, comment fixes, etc from various folks" * tag 'for-4.17/block-20180402' of git://git.kernel.dk/linux-block: (139 commits) blk-mq: Directly schedule q->timeout_work when aborting a request blktrace: fix comment in blktrace_api.h lightnvm: remove function name in strings lightnvm: pblk: remove some unnecessary NULL checks lightnvm: pblk: don't recover unwritten lines lightnvm: pblk: implement 2.0 support lightnvm: pblk: implement get log report chunk lightnvm: pblk: rename ppaf* to addrf* lightnvm: pblk: check for supported version lightnvm: implement get log report chunk helpers lightnvm: make address conversions depend on generic device lightnvm: add support for 2.0 address format lightnvm: normalize geometry nomenclature lightnvm: complete geo structure with maxoc* lightnvm: add shorten OCSSD version in geo lightnvm: add minor version to generic geometry lightnvm: simplify geometry structure lightnvm: pblk: refactor init/exit sequences lightnvm: Avoid validation of default op value lightnvm: centralize permission check for lightnvm ioctl ...
2018-04-05ubi: Reject MLC NANDRichard Weinberger1-0/+11
While UBI and UBIFS seem to work at first sight with MLC NAND, you will most likely lose all your data upon a power-cut or due to read/write disturb. In order to protect users from bad surprises, refuse to attach to MLC NAND. Cc: stable@vger.kernel.org Signed-off-by: Richard Weinberger <richard@nod.at> Acked-by: Boris Brezillon <boris.brezillon@bootlin.com> Acked-by: Artem Bityutskiy <dedekind1@gmail.com>
2018-04-05ubi: Fix error for write accessRomain Izard1-1/+1
When opening a device with write access, ubiblock_open returns an error code. Currently, this error code is -EPERM, but this is not the right value. The open function for other block devices returns -EROFS when opening read-only devices with FMODE_WRITE set. When used with dm-verity, the veritysetup userspace tool is expecting EROFS, and refuses to use the ubiblock device. Use -EROFS for ubiblock as well. As a result, veritysetup accepts the ubiblock device as valid. Cc: stable@vger.kernel.org Fixes: 9d54c8a33eec (UBI: R/O block driver on top of UBI volumes) Signed-off-by: Romain Izard <romain.izard.pro@gmail.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2018-04-05ubi: fastmap: Don't flush fastmap work on detachRichard Weinberger1-1/+0
At this point UBI volumes have already been free()'ed and fastmap can no longer access these data structures. Reported-by: Martin Townsend <mtownsend1973@gmail.com> Fixes: 74cdaf24004a ("UBI: Fastmap: Fix memory leaks while closing the WL sub-system") Cc: stable@vger.kernel.org Signed-off-by: Richard Weinberger <richard@nod.at>
2018-04-04Merge tag 'v4.16-rc2' of ↵Boris Brezillon2-5/+3
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux into mtd/next Backmerge v4.16-rc2 into mtd/next to resolve a conflict between Linus' master branch and nand/for-4.17.
2018-04-04Merge tag 'nand/for-4.17' of git://git.infradead.org/linux-mtd into mtd/nextBoris Brezillon106-5516/+2545
Core changes: * Prepare arrival of the SPI NAND subsystem by implementing a generic (interface-agnostic) layer to ease manipulation of NAND devices * Move onenand code base to the drivers/mtd/nand/ dir * Rework timing mode selection * Provide a generic way for NAND chip drivers to flag a specific GET/SET FEATURE operation as supported/unsupported * Stop embedding ONFI/JEDEC param page in nand_chip Driver changes: * Rework/cleanup of the mxc driver * Various cleanups in the vf610 driver * Migrate the fsmc and vf610 to ->exec_op() * Get rid of the pxa driver (replaced by marvell_nand) * Support ->setup_data_interface() in the GPMI driver * Fix probe error path in several drivers * Remove support for unused hw_syndrome mode in sunxi_nand * Various minor improvements
2018-04-04Merge tag 'spi-nor/for-4.17' of git://git.infradead.org/linux-mtd into mtd/nextBoris Brezillon1-1/+18
* Make fsl-quaspi assign different names to MTD devices connected to the same QSPI controller * Remove an unneeded driver.bus assigned in the fsl-qspi driver
2018-03-30mtd: fsl-quadspi: Distinguish the mtd device namesFabio Estevam1-0/+18
Currently on a imx6sx-sdb board, which has two SPI NOR chips connected to QSPI2 the following output from /proc/mtd is seen: dev: size erasesize name mtd0: 01000000 00010000 "21e4000.qspi" mtd1: 01000000 00010000 "21e4000.qspi" Attempts to partition them on the kernel command line result in both chips with identical (and identically named) partitions, which is an inconvenient behavior. Assign a different mtd->name for each mtd device to avoid this problem. After this change the output from /proc/mtd becomes: dev: size erasesize name mtd0: 01000000 00010000 "21e4000.qspi-0" mtd1: 01000000 00010000 "21e4000.qspi-1" In order to keep mtdparts compatibility keep the mtd->name unchanged when a single SPI NOR is present. Reported-by: David Wolfe <david.wolfe@nxp.com> Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com> Acked-by: Han Xu <han.xu@nxp.com> Signed-off-by: Cyrille Pitchen <cyrille.pitchen@wedev4u.fr> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-03-29mtd: nand: Fix some function description mismatches in core.cXiaolei Li1-6/+6
In core.c, some function descriptions do not match function definitions. Just fix these mismatches. Signed-off-by: Xiaolei Li <xiaolei.li@mediatek.com> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-03-29mtd: jedec_probe: Fix crash in jedec_read_mfr()Linus Walleij1-0/+2
It turns out that the loop where we read manufacturer jedec_read_mfd() can under some circumstances get a CFI_MFR_CONTINUATION repeatedly, making the loop go over all banks and eventually hit the end of the map and crash because of an access violation: Unable to handle kernel paging request at virtual address c4980000 pgd = (ptrval) [c4980000] *pgd=03808811, *pte=00000000, *ppte=00000000 Internal error: Oops: 7 [#1] PREEMPT ARM CPU: 0 PID: 1 Comm: swapper Not tainted 4.16.0-rc1+ #150 Hardware name: Gemini (Device Tree) PC is at jedec_probe_chip+0x6ec/0xcd0 LR is at 0x4 pc : [<c03a2bf4>] lr : [<00000004>] psr: 60000013 sp : c382dd18 ip : 0000ffff fp : 00000000 r10: c0626388 r9 : 00020000 r8 : c0626340 r7 : 00000000 r6 : 00000001 r5 : c3a71afc r4 : c382dd70 r3 : 00000001 r2 : c4900000 r1 : 00000002 r0 : 00080000 Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none Control: 0000397f Table: 00004000 DAC: 00000053 Process swapper (pid: 1, stack limit = 0x(ptrval)) Fix this by breaking the loop with a return 0 if the offset exceeds the map size. Fixes: 5c9c11e1c47c ("[MTD] [NOR] Add support for flash chips with ID in bank other than 0") Cc: <stable@vger.kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-03-29mtd: nand: atmel: Fix get_sectorsize() functionBoris Brezillon1-1/+1
get_sectorsize() was not using the appropriate macro to extract the ECC sector size from the config cache, which led to buggy ECC when using 1024 byte sectors. Fixes: f88fc122cc34 ("mtd: nand: Cleanup/rework the atmel_nand driver") Cc: <stable@vger.kernel.org> Reported-by: Olivier Schonken <olivier.schonken@gmail.com> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Reviewed-by: Richard Weinberger <richard@nod.at> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Tested-by: Olivier Schonken <olivier.schonken@gmail.com>
2018-03-29mtd: fsl-quadspi: Remove unneeded driver.bus assignmentBoris Brezillon1-1/+0
platform_driver_register() takes care of assigning driver->bus to &platform_bus_type, no need to explicitly assign it in the driver. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Acked-by: Han Xu <han.xu@nxp.com> Signed-off-by: Cyrille Pitchen <cyrille.pitchen@wedev4u.fr>
2018-03-29mtd: rawnand: marvell: Rename ->ecc_clk into ->core_clkBoris Brezillon1-14/+14
The core clock field was badly named ->ecc_clk which might lead to some confusion. Rename it ->core_clk. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Acked-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-03-29mtd: rawnand: s3c2410: enhance the probe function error pathMiquel Raynal1-12/+12
Prepare the migration of the lpc32xx_slc driver to use nand_scan() by cleaning the error path in the probe function. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-03-29mtd: rawnand: tango: fix probe function error pathMiquel Raynal1-1/+3
An error after nand_scan_tail() should trigger a nand_cleanup(). The helper mtd_device_parse_register() returns an error code that should be checked and nand_cleanup() called accordingly. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-03-29mtd: rawnand: sh_flctl: fix the probe function error pathMiquel Raynal1-0/+4
An error after nand_scan_tail() should trigger a nand_cleanup(). The helper mtd_device_parse_register() returns an error code that should be checked and nand_cleanup() called accordingly. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-03-29mtd: rawnand: omap2: fix the probe function error pathMiquel Raynal1-1/+4
An error after nand_scan_tail() should trigger a nand_cleanup(). The helper mtd_device_parse_register() returns an error code that should be checked and nand_cleanup() called accordingly. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-03-29mtd: rawnand: mxc: fix probe function error pathMiquel Raynal1-4/+7
An error after nand_scan_tail() should trigger a nand_cleanup(). The helper mtd_device_parse_register() returns an error code that should be checked and nand_cleanup() called accordingly. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-03-29mtd: rawnand: denali: fix probe function error pathMiquel Raynal1-1/+3
An error after nand_scan_tail() should trigger a nand_cleanup(). The helper mtd_device_register() returns an error code that should be checked and nand_cleanup() called accordingly. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-03-29mtd: rawnand: davinci: fix probe function error pathMiquel Raynal1-1/+4
An error after nand_scan_tail() should trigger a nand_cleanup(). The helper mtd_device_register() returns an error code that should be checked and nand_cleanup() called accordingly. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-03-29mtd: rawnand: cafe: fix probe function error pathMiquel Raynal1-1/+5
An error after nand_scan_tail() should trigger a nand_cleanup(). The helper mtd_device_parse_register() returns an error code that should be checked and nand_cleanup() called accordingly. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-03-29mtd: rawnand: brcmnand: fix probe function error pathMiquel Raynal1-1/+5
An error after nand_scan_tail() should trigger a nand_cleanup(). The helper mtd_device_register() returns an error code that should be checked and nand_cleanup() called accordingly. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-03-29mtd: rawnand: sunxi: Stop supporting ECC_HW_SYNDROME modeBoris Brezillon1-135/+20
This mode is not used by any existing setup and should not be used because it overwrites the BBMs. Let's just remove it before someone starts using it. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Acked-by: Maxime Ripard <maxime.ripard@bootlin.com> Tested-by: Miquel Raynal <miquel.raynal@bootlin.com>
2018-03-29mtd: rawnand: marvell: Fix clock resource by adding a register clockGregory CLEMENT1-6/+28
On Armada 7K/8K we need to explicitly enable the register clock. This clock is optional because not all the SoCs using this IP need it but at least for Armada 7K/8K it is actually mandatory. The binding documentation is updated accordingly. Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-03-29mtd: ftl: Use DIV_ROUND_UP()Arushi Singhal1-2/+2
The kernel.h macro DIV_ROUND_UP performs the computation (((n) + (d) - 1) / (d)) but is perhaps more readable. Signed-off-by: Arushi Singhal <arushisinghal19971997@gmail.com> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-03-29mtd: Fix some function description mismatches in mtdcore.cXiaolei Li1-4/+4
In mtdcore.c, some function descriptions do not match function definitions. Just fix these mismatches. Signed-off-by: Xiaolei Li <xiaolei.li@mediatek.com> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-03-29mtd: physmap_of: update struct map_info's swap as per map requirementPrabhakar Kushwaha1-0/+6
It is not necessary for all device's maps to be CFI_HOST_ENDIAN. Maps device can be Big endian or little endian. Currently it is being taken care using CONFIG_MTD_CFI_LE_BYTE_SWAP or CONFIG_MTD_CFI_BE_BYTE_SWAP i.e. compile time. Now update struct map_info's swap field based on device characteristics defined in device tree. Signed-off-by: Jagdish Gediya <jagdish.gediya@nxp.com> Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-03-29mtd: update documentation of mtd_device_parse_register()Rafał Miłecki1-4/+3
In the commit 2c77c57d22adb ("mtd: move code adding master MTD out of mtd_add_device_partitions()") behavior of mtd_device_parse_register() has very slightly changed. It's a pretty non-significant order change to match updated function behavior. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Reviewed-by: Richard Weinberger <richard@nod.at> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-03-29mtd: jedec_probe: add Eon EN29LV400A IDsLinus Walleij1-0/+32
This adds the JEDEC IDs for Eon EN29LV400A variants EN29LV400AB and EN29LV400AT. This chip is found in the D-Link DNS-313. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-03-27mtd: ofpart: add of_match_table with "fixed-partitions"Rafał Miłecki1-0/+7
This allows using this parser with any flash driver that takes care of setting of_node (using mtd_set_of_node helper) correctly. Up to now support for "fixed-partitions" DT compatibility string was working only with flash drivers that were specifying "ofpart" (manually or by letting mtd use the default set of parsers). This matches existing bindings documentation. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Reviewed-by: Brian Norris <computersforpeace@gmail.com> Tested-by: Brian Norris <computersforpeace@gmail.com> Reviewed-by: Richard Weinberger <richard@nod.at> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-03-27mtd: rename "ofpart" parser to "fixed-partitions" as it fits it betterRafał Miłecki2-7/+8
Type "ofpart" means that OF should be used to get partitioning info and this driver supports "fixed-partitions" binding only. Renaming it should lead to less confusion especially when parsers for new compatibility strings start to appear. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Reviewed-by: Richard Weinberger <richard@nod.at> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-03-27mtd: partitions: add of_match_table parser matching for the "ofpart" typeRafał Miłecki1-9/+107
In order to properly support compatibility strings as described in the bindings/mtd/partition.txt "ofpart" type should be treated as an indication for looking into OF. MTD should check "compatible" property and search for a matching parser rather than blindly trying the one supporting "fixed-partitions". It also means that existing "fixed-partitions" parser should get renamed to use a more meaningful name. This commit achievies that aim by introducing a new mtd_part_of_parse(). It works by looking for a matching parser for every string in the "compatibility" property (starting with the most specific one). Please note that driver-specified parsers still take a precedence. It's assumed that driver providing a parser type has a good reason for that (e.g. having platform data with device-specific info). Also doing otherwise could break existing setups. The same applies to using default parsers (including "cmdlinepart") as some overwrite DT data with cmdline argument. Partition parsers can now provide an of_match_table to enable flash<-->parser matching via device tree as documented in the mtd/partition.txt. This support is currently limited to built-in parsers as it uses request_module() and friends. This should be sufficient for most cases though as compiling parsers as modules isn't a common choice. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Tested-by: Peter Rosin <peda@axentia.se> Reviewed-by: Richard Weinberger <richard@nod.at> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-03-21mtd: nand: fsl_ifc: Read ECCSTAT0 and ECCSTAT1 registers for IFC 2.0Jagdish Gediya1-5/+1
Due to missing information in Hardware manual, current implementation doesn't read ECCSTAT0 and ECCSTAT1 registers for IFC 2.0. Add support to read ECCSTAT0 and ECCSTAT1 registers during ecccheck for IFC 2.0. Fixes: 656441478ed5 ("mtd: nand: ifc: Fix location of eccstat registers for IFC V1.0") Cc: stable@vger.kernel.org # v3.18+ Signed-off-by: Jagdish Gediya <jagdish.gediya@nxp.com> Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-03-21mtd: nand: fsl_ifc: Fix eccstat array overflow for IFC ver >= 2.0.0Jagdish Gediya1-13/+10
Number of ECC status registers i.e. (ECCSTATx) has been increased in IFC version 2.0.0 due to increase in SRAM size. This is causing eccstat array to over flow. So, replace eccstat array with u32 variable to make it fail-safe and independent of number of ECC status registers or SRAM size. Fixes: bccb06c353af ("mtd: nand: ifc: update bufnum mask for ver >= 2.0.0") Cc: stable@vger.kernel.org # 3.18+ Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com> Signed-off-by: Jagdish Gediya <jagdish.gediya@nxp.com> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-03-21mtd: nand: fsl_ifc: Fix nand waitfunc return valueJagdish Gediya1-2/+3
As per the IFC hardware manual, Most significant 2 bytes in nand_fsr register are the outcome of NAND READ STATUS command. So status value need to be shifted and aligned as per the nand framework requirement. Fixes: 82771882d960 ("NAND Machine support for Integrated Flash Controller") Cc: stable@vger.kernel.org # v3.18+ Signed-off-by: Jagdish Gediya <jagdish.gediya@nxp.com> Reviewed-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-03-21mtd: maps: remove bfin-async-flash driverArnd Bergmann3-207/+0
The blackfin architecture is getting removed, so this driver has become obsolete. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-03-21mtd: tests: check erase block count in page testStefan Agner1-3/+7
When there is only a single erase block, the cross erase test does not report sensible errors. Warn in case there is only a single erase block instead of executing the test. Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-03-21mtd: nftl: use %*ph to print small bufferAntonio Cardace1-2/+1
Use %*ph format to print small buffer as hex string. Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Antonio Cardace <anto.cardace@gmail.com> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-03-21mtd: Stop updating erase_info->state and calling mtd_erase_callback()Boris Brezillon26-172/+21
MTD users are no longer checking erase_info->state to determine if the erase operation failed or succeeded. Moreover, mtd_erase_callback() is now a NOP. We can safely get rid of all mtd_erase_callback() calls and all erase_info->state assignments. While at it, get rid of the erase_info->state field, all MTD_ERASE_XXX definitions and the mtd_erase_callback() function. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Reviewed-by: Richard Weinberger <richard@nod.at> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Acked-by: Bert Kenward <bkenward@solarflare.com> --- Changes in v2: - Address a few coding style issues (reported by Miquel) - Remove comments that are no longer valid (reported by Miquel)
2018-03-20mtd: rawnand: gpmi: use core timings instead of an empirical derivationMiquel Raynal4-655/+98
GPMI driver timings derivation looks very empirical and does not use the known timings that the core wants to use with the NAND chip, by using local defined constants that have no special meaning from the outside world. Simplify the way all of this is computed and use the NAND core's SDR timings. Integrity of the reads/writes has been checked with nandbiterrs, speed improvements with flash_speed on a Freescale i.MX6 DualLite/Solo SABRE Automotive Board. Measures are below, variations of less than 150kiB/s between tests are common and then not significant. Speeds using mode 5 are the same, while speeds using mode 0 are quite improved (+40/50% from non-optimal computation). Forcing timings mode 0: ======================= Before this patch: ------------------ eraseblock write speed is 2298 KiB/s eraseblock read speed is 3636 KiB/s page write speed is 2136 KiB/s page read speed is 3316 KiB/s 2 page write speed is 2199 KiB/s 2 page read speed is 3468 KiB/s After this patch: ----------------- eraseblock write speed is 3232 KiB/s eraseblock read speed is 5663 KiB/s page write speed is 2915 KiB/s page read speed is 4904 KiB/s 2 page write speed is 3084 KiB/s 2 page read speed is 5267 KiB/s Forcing timings mode 5: ======================= Before this patch: ------------------ eraseblock write speed is 4338 KiB/s eraseblock read speed is 14883 KiB/s page write speed is 3786 KiB/s page read speed is 12800 KiB/s 2 page write speed is 4076 KiB/s 2 page read speed is 14065 KiB/s After this patch: ----------------- eraseblock write speed is 4309 KiB/s eraseblock read speed is 14712 KiB/s page write speed is 3764 KiB/s page read speed is 12673 KiB/s 2 page write speed is 4076 KiB/s 2 page read speed is 14065 KiB/s Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-03-20mtd: rawnand: gpmi: support ->setup_data_interface()Miquel Raynal3-250/+150
Until now the GPMI driver had its own timings logic while the core already handles that and request the NAND controller drivers to support the ->setup_data_interface() hook. Implement that hook by reusing the already existing function. No real glue is necessary between core timing delays and GPMI registers because the driver already translates the ONFI timing modes into register values. Make use of the core's tREA, tRLOH and tRHOH values that allow computing more precise timings for mode [0-3] and get significantly better values (+20% with an i.MX6 Sabre Auto board). Otherwise use the existing logic. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Tested-by: Han Xu <han.xu@nxp.com> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-03-20mtd: rawnand: get rid of the ONFI parameter page in nand_chipMiquel Raynal1-9/+25
The NAND chip parameter page is statically allocated within the nand_chip structure, which reserves a lot of space. Even not ONFI nor JEDEC chips have it embedded. Also, only a few parameters are actually read from the parameter page after the detection. Now that there is a small nand_parameters structure that hold all needed ONFI parameters, remove the ONFI page from the nand_chip structure by just allocating it during the identification phase and removing it right after. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-03-20mtd: rawnand: get rid of the JEDEC parameter page in nand_chipMiquel Raynal1-13/+28
The NAND chip parameter page is statically allocated within the nand_chip structure, which reserves a lot of space. Even not ONFI nor JEDEC chips have it embedded. Also, only a few parameters are actually read from the parameter page after the detection. Now that there is a small nand_parameters structure that can held generic parameters, remove the JEDEC page from the nand_chip structure by just allocating it during the identification phase and removing it right after. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-03-20mtd: rawnand: macronix: nack the support of changing timings for one chipMiquel Raynal1-0/+13
The MX30LF2G18AC chip declares in its parameter page supporting SET/GET_FEATURES but when it comes to timings, experience shows that it is not the case. Unflag this feature for this particular chip in the nand_parameters structure to avoid unnecessary errors and downturns. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-03-20mtd: rawnand: allow vendors to declare (un)supported featuresMiquel Raynal2-7/+23
If SET/GET_FEATURES is available (from the parameter page), use a bitmap to declare what feature is actually supported. Initialize the bitmap in the core to support timing changes (only feature used by the core), also add support for Micron specific features used in Micron initialization code (in the init routine). Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-03-20mtd: rawnand: prepare the removal of the ONFI parameter pageMiquel Raynal4-28/+35
The NAND chip parameter page is statically allocated within the nand_chip structure, which reserves a lot of space. Even not ONFI nor JEDEC chips have it embedded. Also, only a few parameters are actually read from the parameter page after the detection. ONFI-related parameters that will be used outside from the identification function are stored in a separate onfi_parameters structure embedded in nand_parameters, this small structure that already hold generic parameters. For now, the onfi_parameters structure is allocated statically. However, after some deep rework in the NAND framework, it will be possible to do dynamic allocations from the NAND identification phase, and this strcuture will then be dynamically allocated when needed. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
2018-03-20mtd: rawnand: prepare the removal of ONFI/JEDEC parameter pagesMiquel Raynal1-22/+17
The NAND chip parameter page is statically allocated within the nand_chip structure, which reserves a lot of space. Even not ONFI nor JEDEC chips have it embedded. Also, only a few parameters are actually read from the parameter page after the detection. To prepare to the removal of such huge structure, a small NAND parameter structure is allocated statically and contains only very few members that are generic to all chips and actually used elsewhere in the code. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-18 00:55:47 +0300