summaryrefslogtreecommitdiff
path: root/drivers/mtd/ubi
AgeCommit message (Collapse)AuthorFilesLines
2013-03-03Merge tag 'for-linus-20130301' of git://git.infradead.org/linux-mtdLinus Torvalds1-3/+3
Pull MTD update from David Woodhouse: "Fairly unexciting MTD merge for 3.9: - misc clean-ups in the MTD command-line partitioning parser (cmdlinepart) - add flash locking support for STmicro chips serial flash chips, as well as for CFI command set 2 chips. - new driver for the ELM error correction HW module found in various TI chips, enable the OMAP NAND driver to use the ELM HW error correction - added number of new serial flash IDs - various fixes and improvements in the gpmi NAND driver - bcm47xx NAND driver improvements - make the mtdpart module actually removable" * tag 'for-linus-20130301' of git://git.infradead.org/linux-mtd: (45 commits) mtd: map: BUG() in non handled cases mtd: bcm47xxnflash: use pr_fmt for module prefix in messages mtd: davinci_nand: Use managed resources mtd: mtd_torturetest can cause stack overflows mtd: physmap_of: Convert device allocation to managed devm_kzalloc() mtd: at91: atmel_nand: for PMECC, add code to check the ONFI parameter ECC requirement. mtd: atmel_nand: make pmecc-cap, pmecc-sector-size in dts is optional. mtd: atmel_nand: avoid to report an error when lookup table offset is 0. mtd: bcm47xxsflash: adjust names of bus-specific functions mtd: bcm47xxpart: improve probing of nvram partition mtd: bcm47xxpart: add support for other erase sizes mtd: bcm47xxnflash: register this as normal driver mtd: bcm47xxnflash: fix message mtd: bcm47xxsflash: register this as normal driver mtd: bcm47xxsflash: write number of written bytes mtd: gpmi: add sanity check for the ECC mtd: gpmi: set the Golois Field bit for mx6q's BCH mtd: devices: elm: Removes <xx> literals in elm DT node mtd: gpmi: fix a dereferencing freed memory error mtd: fix the wrong timeo for panic_nand_wait() ...
2013-02-23new helper: file_inode(file)Al Viro1-1/+1
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-02-04mtd: rename random32() to prandom_u32()Akinobu Mita1-3/+3
Use more preferable function name which implies using a pseudo-random number generator. Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-12-20Merge tag 'upstream-3.8-rc1' of git://git.infradead.org/linux-ubiLinus Torvalds12-135/+98
Pull UBI update from Artem Bityutskiy: "Nothing exciting, just clean-ups and nicification. Oh, and one small optimization which makes UBI to use less RAM." * tag 'upstream-3.8-rc1' of git://git.infradead.org/linux-ubi: UBI: embed ubi_debug_info field in ubi_device struct UBI: introduce helpers dbg_chk_{io, gen} UBI: replace memcpy with struct assignment UBI: remove spurious comment UBI: gluebi: rename misleading variables UBI: do not allocate the memory unnecessarily UBI: use list_move_tail instead of list_del/list_add_tail
2012-12-10UBI: embed ubi_debug_info field in ubi_device structEzequiel Garcia4-85/+50
ubi_debug_info struct was dynamically allocated which is always suboptimal, for it tends to fragment memory and make the code error-prone. Fix this by embedding it in ubi_device struct. Signed-off-by: Ezequiel Garcia <elezegarcia@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-12-10UBI: introduce helpers dbg_chk_{io, gen}Ezequiel Garcia6-14/+23
With this patch code is a bit more readable and there's no generated code or functionality impact. Furthermore, this abstracts implementation details and will allow to change ubi_debug_info in a less invasive way. Signed-off-by: Ezequiel Garcia <elezegarcia@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-12-04UBI: dont call ubi_self_check_all_ff() in __wl_get_peb()Richard Weinberger1-9/+9
As ubi_self_check_all_ff() might sleep we are not allowed to call it from atomic context. For now we call it only from ubi_wl_get_peb(). There are some code paths where it would also make sense, but these paths are currently atomic and only enabled when fastmap is used. Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-12-04UBI: remove PEB from free tree in get_peb_for_wl()Richard Weinberger1-1/+7
If UBI is built without fastmap, get_peb_for_wl() has to remove the PEB manially from the free tree. Otherwise the requested PEB lives in two trees. Reported-by: Zach Sadecki <zsadecki@itwatchdogs.com> Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-12-03UBI: replace memcpy with struct assignmentEzequiel Garcia3-7/+4
This kind of memcpy() is error-prone. Its replacement with a struct assignment is prefered because it's type-safe and much easier to read. Found by coccinelle. Hand patched and reviewed. Tested by compilation only. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ identifier struct_name; struct struct_name to; struct struct_name from; expression E; @@ -memcpy(&(to), &(from), E); +to = from; // </smpl> Signed-off-by: Peter Senna Tschudin <peter.senna@gmail.com> Signed-off-by: Ezequiel Garcia <elezegarcia@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-11-30UBI: remove spurious commentEzequiel Garcia1-1/+0
This line of comment looks completely bogus. It was introduced in: commit d99383b00eba9c6ac3dea462d718b2849012ee03 Author: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Date: Wed May 18 14:47:34 2011 +0300 UBI: change the interface of a debugging check function Remove it. Signed-off-by: Ezequiel Garcia <elezegarcia@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-11-30UBI: gluebi: rename misleading variablesEzequiel Garcia1-14/+14
Both names 'total_read' and 'total_written' are actually used as the number of bytes left to read and write. Fix this confusion by renaming both to 'bytes_left'. Signed-off-by: Ezequiel Garcia <elezegarcia@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-10-26UBI: do not allocate the memory unnecessarilyArtem Bityutskiy1-12/+7
UBI reserves an LEB sized buffer for various needs. We can use this buffer while scanning, instead of allocating another one. This patch was originally created by Jan Luebbe <jlu@pengutronix.de>, but then he dropped it and I picked up and tweaked a little bit. Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-10-26UBI: use list_move_tail instead of list_del/list_add_tailWei Yongjun1-4/+2
Using list_move_tail() instead of list_del() + list_add_tail(). dpatch engine is used to auto generate this patch. (https://github.com/weiyj/dpatch) Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Acked-by: Richard Weinberger <richard@nod.at> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-10-08Merge tag 'upstream-3.7-rc1-fastmap' of git://git.infradead.org/linux-ubiLinus Torvalds9-211/+2784
Pull UBI fastmap changes from Artem Bityutskiy: "This pull request contains the UBI fastmap support implemented by Richard Weinberger from Linutronix. Fastmap is designed to address UBI's slow scanning issues. Namely, it introduces a new on-flash data-structure called "fastmap", which stores the information about logical<->physical eraseblocks mappings. So now to get this information just read the fastmap, instead of doing full scan. More information here can be found in Richard's announcement in LKML (Subject: UBI: Fastmap request for inclusion (v19)): http://thread.gmane.org/gmane.linux.kernel/1364922/focus=1369109 One thing I want to explicitly say is that fastmap did not have large enough linux-next exposure. It is partially my fault - I did not respond quickly enough. I _really_ apologize for this. But it had good testing and disabled by default, so I do not expect that we'll break anything. Fastmap is declared as experimental so far, and it is off by default. We did declare that the on-flash format may be changed. The reason for this is that no one used it in real production so far, so there is a high risk that something is missing. Besides, we do not have user-space tools supporting fastmap so far. Nevertheless, I suggest we merge this feature. Many people want UBI's scanning bottleneck to be fixed and merging fastmap now should accelerate its production use. The plan is to make it bullet-prove, somewhat clean-up, and make it the default for UBI. I do not know how many kernel releases will it take. Basically, I what I want to do for fastmap is something like Linus did for btrfs few years ago." * tag 'upstream-3.7-rc1-fastmap' of git://git.infradead.org/linux-ubi: UBI: Wire-up fastmap UBI: Add fastmap core UBI: Add fastmap support to the WL sub-system UBI: Add fastmap stuff to attach.c UBI: Wire-up ->fm_sem UBI: Add fastmap bits to build.c UBI: Add self_check_eba() UBI: Export next_sqnum() UBI: Add fastmap stuff to ubi.h UBI: Add fastmap on-flash data structures
2012-10-03UBI: Wire-up fastmapRichard Weinberger2-0/+22
Make fastmap known to Kconfig, UBI Makefile and MAINTAINERS. Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-10-03UBI: Add fastmap coreRichard Weinberger1-0/+1537
Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-10-03UBI: Add fastmap support to the WL sub-systemRichard Weinberger1-44/+531
To make fastmap possible the WL sub-system needs some changes. Mostly to support fastmaps pools. Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-10-03UBI: Add fastmap stuff to attach.cRichard Weinberger3-130/+260
- Export compare_lebs() as fastmap needs this function. - Implement fastmap scan logic. Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-10-03UBI: Wire-up ->fm_semRichard Weinberger1-0/+12
Fastmap uses ->fm_sem to stop EBA changes while writing a new fastmap. Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-10-03UBI: Add fastmap bits to build.cRichard Weinberger1-3/+65
Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-10-03UBI: Add self_check_eba()Richard Weinberger1-0/+96
self_check_eba() compares two ubi_attach_info objects. Fastmap uses this function for self checks. Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-10-03UBI: Export next_sqnum()Richard Weinberger1-9/+9
Fastmap needs next_sqnum(), rename it to ubi_next_sqnum() and make it non-static. Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-10-03UBI: Add fastmap stuff to ubi.hRichard Weinberger2-25/+115
This patch adds fastmap specific data structures to ubi.h. It moves also struct ubi_work to ubi.h as it is now needed for more than one c file. Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-10-03UBI: Add fastmap on-flash data structuresRichard Weinberger1-0/+137
Add the on-flash data structures neeed by fastmap to ubi-media.h Signed-off-by: Richard Weinberger <richard@nod.at> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-10-03Merge tag 'upstream-3.7-rc1' of git://git.infradead.org/linux-ubiLinus Torvalds13-321/+383
Pull UBI changes from Artem Bityutskiy: "The main change is the way we reserve eraseblocks for bad blocks handling. We used to reserve 2% of the partition, but now we are more aggressive and we reserve 2% of the entire chip, which is what actually manufacturers specify in data sheets. We introduced an option to users to override the default, though. There are a couple of fixes as well, and a number of cleanups." * tag 'upstream-3.7-rc1' of git://git.infradead.org/linux-ubi: (24 commits) UBI: fix trivial typo 'it' => 'is' UBI: load after mtd device drivers UBI: print less UBI: use pr_ helper instead of printk UBI: comply with coding style UBI: erase free PEB with bitflip in EC header UBI: fix autoresize handling in R/O mode UBI: add max_beb_per1024 to attach ioctl UBI: allow specifying bad PEBs limit using module parameter UBI: check max_beb_per1024 value in ubi_attach_mtd_dev UBI: prepare for max_beb_per1024 module parameter addition UBI: introduce MTD_PARAM_MAX_COUNT UBI: separate bad_peb_limit in a function arm: sam9_l9260_defconfig: correct CONFIG_MTD_UBI_BEB_LIMIT UBI: use the whole MTD device size to get bad_peb_limit mtd: mtdparts: introduce mtd_get_device_size mtd: mark mtd_is_partition argument as constant arm: sam9_l9260_defconfig: remove non-existing config option UBI: kill CONFIG_MTD_UBI_BEB_RESERVE UBI: limit amount of reserved eraseblocks for bad PEB handling ...
2012-09-26UBI: fix trivial typo 'it' => 'is'Brian Norris1-1/+1
Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-09-26UBI: load after mtd device driversJiang Lu1-1/+1
Use 'late_initcall()' in UBI to make sure it initializes after MTD drivers. Signed-off-by: Jiang Lu <lu.jiang@windriver.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-09-04UBI: fix a horrible memory deallocation bugArtem Bityutskiy1-2/+2
UBI was mistakingly using 'kfree()' instead of 'kmem_cache_free()' when freeing "attach eraseblock" structures in vtbl.c. Thankfully, this happened only when we were doing auto-format, so many systems were unaffected. However, there are still many users affected. It is strange, but the system did not crash and nothing bad happened when the SLUB memory allocator was used. However, in case of SLOB we observed an crash right away. This problem was introduced in 2.6.39 by commit "6c1e875 UBI: add slab cache for ubi_scan_leb objects" A note for stable trees: Because variable were renamed, this won't cleanly apply to older kernels. Changing names like this should help: 1. ai -> si 2. aeb_slab_cache -> seb_slab_cache 3. new_aeb -> new_seb Reported-by: Richard Genoud <richard.genoud@gmail.com> Tested-by: Richard Genoud <richard.genoud@gmail.com> Tested-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Cc: stable@vger.kernel.org [v2.6.39+] Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-09-04UBI: print lessArtem Bityutskiy7-56/+42
UBI currently prints a lot of information when it mounts a volume, which bothers some people. Make it less chatty - print only important information by default. Get rid of 'dbg_msg()' macro completely. Reported-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-09-04UBI: use pr_ helper instead of printkArtem Bityutskiy6-103/+93
Use 'pr_err()' instead of 'printk(KERN_ERR', etc. Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-09-04UBI: comply with coding styleArtem Bityutskiy9-113/+101
Join all the split printk lines in order to stop checkpatch complaining. Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-09-04UBI: erase free PEB with bitflip in EC headerMatthieu CASTET1-1/+1
Without this patch, these PEB are not scrubbed until we put data in them. Bitflip can accumulate latter and we can loose the EC header (but VID header should be intact and allow to recover data). Signed-off-by: Matthieu Castet <matthieu.castet@parrot.com> Cc: stable@vger.kernel.org Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-09-04UBI: fix autoresize handling in R/O modeArtem Bityutskiy1-0/+5
Currently UBI fails in autoresize when it is in R/O mode (e.g., because the underlying MTD device is R/O). This patch fixes the issue - we just skip autoresize and print a warning. Reported-by: Pali Rohár <pali.rohar@gmail.com> Cc: stable@vger.kernel.org Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-09-04UBI: add max_beb_per1024 to attach ioctlRichard Genoud2-2/+3
This patch provides a possibility to set the "maximum expected number of bad blocks per 1024 blocks" (max_beb_per1024) for each mtd device using the UBI_IOCATT ioctl. Signed-off-by: Richard Genoud <richard.genoud@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-09-04UBI: allow specifying bad PEBs limit using module parameterRichard Genoud2-15/+27
This patch provides the possibility to adjust the "maximum expected number of bad blocks per 1024 blocks" (max_beb_per1024) for each mtd device. The majority of NAND devices have their max_beb_per1024 equal to 20, but sometimes it's more. Now, we can adjust that via a kernel parameter: ubi.mtd=<name|num|path>[,<vid_hdr_offs>[,max_beb_per1024]] Signed-off-by: Richard Genoud <richard.genoud@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-09-04UBI: check max_beb_per1024 value in ubi_attach_mtd_devRichard Genoud1-0/+9
max_beb_per1024 shouldn't be negative, and a 0 value will be treated as the default value. For the upper bound, 768/1024 should be enough. Signed-off-by: Richard Genoud <richard.genoud@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-09-04UBI: prepare for max_beb_per1024 module parameter additionRichard Genoud3-8/+12
This patch prepare the way for the addition of max_beb_per1024 module parameter. There's no functional change. Signed-off-by: Richard Genoud <richard.genoud@gmail.com> Reviewed-by: Shmulik Ladkani <shmulik.ladkani@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-09-04UBI: introduce MTD_PARAM_MAX_COUNTRichard Genoud1-2/+5
Signed-off-by: Richard Genoud <richard.genoud@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-09-04UBI: separate bad_peb_limit in a functionRichard Genoud1-23/+31
No functional changes here, just to prepare for next patch. Signed-off-by: Richard Genoud <richard.genoud@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-09-04UBI: use the whole MTD device size to get bad_peb_limitRichard Genoud2-9/+39
On NAND flash devices, UBI reserves some physical erase blocks (PEB) for bad block handling. Today, the number of reserved PEB can only be set as a percentage of the total number of PEB in each MTD partition. For example, for a NAND flash with 128KiB PEB, 2 MTD partition of 20MiB (mtd0) and 100MiB (mtd1) and 2% reserved PEB: - the UBI device on mtd0 will have 2 PEB reserved - the UBI device on mtd1 will have 16 PEB reserved The problem with this behaviour is that NAND flash manufacturers give a minimum number of valid block (NVB) during the endurance life of the device, e.g.: Parameter Symbol Min Max Unit Notes -------------------------------------------------------------- Valid block number NVB 1004 1024 Blocks 1 From this number we can deduce the maximum number of bad PEB that a device will contain during its endurance life: a 128MiB NAND flash (1024 PEB) will not have less than 20 bad blocks during the flash endurance life. But the manufacturer doesn't tell where those bad block will appear. He doesn't say either if they will be equally disposed on the whole device (and I'm pretty sure they won't). So, according to the datasheets, we should reserve the maximum number of bad PEB for each UBI device (worst case scenario: 20 bad blocks appears on the smallest MTD partition). So this patch make UBI use the whole MTD device size to calculate the maximum bad expected eraseblocks. The Kconfig option is in per1024 blocks, thus it can have a default value of 20 which is *very* common for NAND devices. Signed-off-by: Richard Genoud <richard.genoud@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-09-04UBI: kill CONFIG_MTD_UBI_BEB_RESERVEShmulik Ladkani2-19/+0
CONFIG_MTD_UBI_BEB_RESERVE and MIN_RESEVED_PEBS are no longer used, since the amount of reserved eraseblocks for bad PEB handling is now derived from 'ubi->bad_peb_limit' (ubi's maximum expected bad eraseblocks). Signed-off-by: Shmulik Ladkani <shmulik.ladkani@gmail.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@linux.intel.com>
2012-09-04UBI: limit amount of reserved eraseblocks for bad PEB handlingShmulik Ladkani2-21/+41
The existing mechanism of reserving PEBs for bad PEB handling has two flaws: - It is calculated as a percentage of good PEBs instead of total PEBs. - There's no limit on the amount of PEBs UBI reserves for future bad eraseblock handling. This patch changes the mechanism to overcome these flaws. The desired level of PEBs reserved for bad PEB handling (beb_rsvd_level) is set to the maximum expected bad eraseblocks (bad_peb_limit) minus the existing number of bad eraseblocks (bad_peb_count). The actual amount of PEBs reserved for bad PEB handling is usually set to the desired level (but in some circumstances may be lower than the desired level, e.g. when attaching to a device that has too few available PEBs to satisfy the desired level). In the case where the device has too many bad PEBs (above the expected limit), then the desired level, and the actual amount of PEBs reserved are set to zero. No PEBs will be set aside for future bad eraseblock handling - even if some PEBs are made available (e.g. by shrinking a volume). If another PEB goes bad, and there are available PEBs, then the eraseblock will be marked bad (consuming one available PEB). But if there are no available PEBs, ubi will go into readonly mode. Signed-off-by: Shmulik Ladkani <shmulik.ladkani@gmail.com>
2012-09-04UBI: introduce new bad PEB limitShmulik Ladkani3-8/+32
Introduce 'ubi->bad_peb_limit', which specifies an upper limit of PEBs UBI expects to go bad. Currently, it is initialized to a fixed percentage of total PEBs in the UBI device (configurable via CONFIG_MTD_UBI_BEB_LIMIT). The 'bad_peb_limit' is intended to be used for calculating the amount of PEBs UBI needs to reserve for bad eraseblock handling. Artem: minor amendments. Signed-off-by: Shmulik Ladkani <shmulik.ladkani@gmail.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@linux.intel.com>
2012-09-04UBI: print PID in debug messagesArtem Bityutskiy1-1/+2
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-09-04UBI: print image sequence number as unsigned integerArtem Bityutskiy1-1/+1
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-07-18UBI: harmonize the update of ubi->beb_rsvd_pebsShmulik Ladkani3-18/+26
Currently, there are several locations where an attempt to reserve more PEBs for bad PEB handling is made, with the same code being duplicated. Harmonize it by introducing 'ubi_update_reserved()'. Also, improve the debug message issued, making it more descriptive. Artem: amended the patch a little. Signed-off-by: Shmulik Ladkani <shmulik.ladkani@gmail.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@linux.intel.com>
2012-07-18UBI: trivial: fix comment of ubi_calculate_reserved functionShmulik Ladkani1-1/+1
The function name within the comment was not aligned with the actual function name. Signed-off-by: Shmulik Ladkani <shmulik.ladkani@gmail.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@linux.intel.com>
2012-07-18UBI: fix spelling of detach in debug outputPeter Meerwald1-1/+1
Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@linux.intel.com>
2012-07-18UBI: Change the default percentage of reserved PEBRichard Genoud1-1/+1
The actual value (1%) is too low for actual NAND devices, a huge majority of device has 2% maximum bad blocks (SLC or MLC). (Actually it's 20 blocks on a 1024 blocks device, 40/2048...) Signed-off-by: Richard Genoud <richard.genoud@gmail.com>
2012-06-27UBI: correct usage of IS_ENABLED()Brian Norris1-4/+4
Commit "e9b4cf2 UBI: fix debugfs-less systems support" fixed one regression but introduced a different regression - the debugfs is now always compiled out. Root cause: IS_ENABLED() arguments should be used with the CONFIG_* prefix. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-07 05:39:45 +0300