summaryrefslogtreecommitdiff
path: root/drivers/mtd/spi-nor
AgeCommit message (Collapse)AuthorFilesLines
2023-01-02mtd: cfi: allow building spi-intel standaloneArnd Bergmann1-0/+1
When MTD or MTD_CFI_GEOMETRY is disabled, the spi-intel driver fails to build, as it includes the shared CFI header: include/linux/mtd/cfi.h:62:2: error: #warning No CONFIG_MTD_CFI_Ix selected. No NOR chip support can work. [-Werror=cpp] 62 | #warning No CONFIG_MTD_CFI_Ix selected. No NOR chip support can work. linux/mtd/spi-nor.h does not actually need to include cfi.h, so remove the inclusion here to fix the warning. This uncovers a missing #include in spi-nor/core.c so add that there to prevent a different build issue. Fixes: e23e5a05d1fd ("mtd: spi-nor: intel-spi: Convert to SPI MEM") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Tokunori Ikegami <ikegami.t@gmail.com> Acked-by: Pratyush Yadav <pratyush@kernel.org> Reviewed-by: Tudor Ambarus <tudor.ambarus@linaro.org> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20221220141352.1486360-1-arnd@kernel.org
2022-12-05Merge tag 'spi-nor/for-6.2' into mtd/nextMiquel Raynal11-45/+211
SPI NOR core changes: * Add support for flash reset using the dt reset-gpios property. * Update hwcaps.mask to include 8D-8D-8D read and page program ops when xSPI profile 1.0 table is defined. * Bypass zero erase size in spi_nor_find_best_erase_type(). * Fix select_uniform_erase to skip 0 erase size * Add generic flash driver. If a flash is not found in the flash_info array, fall back to the generic flash driver which is described solely by the flash's SFDP tables. * Fix the number of bytes for the dummy cycles in spi_nor_spimem_check_readop(). * Introduce SPI_NOR_QUAD_PP flag, as PP_1_1_4 is not SFDP discoverable. SPI NOR manufacturer drivers changes: * Spansion: - use PARSE_SFDP for s28hs512t, - add support for s28hl512t, s28hl01gt, and s28hs01gt. * Gigadevice: Replace default_init() with post_bfpt() for gd25q256. * Micron - ST: Enable locking for mt25qu256a. * Winbond: Add support for W25Q512NW-IQ. * ISSI: Use PARSE_SFDP and SPI_NOR_QUAD_PP. Fix merge conflict in the jedec,spi-nor bindings. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2022-11-22mtd: spi-nor: add SFDP fixups for Quad Page ProgramSudip Mukherjee3-0/+9
SFDP table of some flash chips do not advertise support of Quad Input Page Program even though it has support. Use flags and add hardware cap for these chips. Signed-off-by: Sudip Mukherjee <sudip.mukherjee@sifive.com> [tudor.ambarus@microchip.com: move pp setting in spi_nor_init_default_params] Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Link: https://lore.kernel.org/r/20220920184808.44876-2-sudip.mukherjee@sifive.com
2022-11-22mtd: spi-nor: issi: is25wp256: Init flash based on SFDPSudip Mukherjee1-2/+2
The datasheet of is25wp256 says it supports SFDP. Get rid of the static initialization of the flash parameters and init them when parsing SFDP. Testing showed the flash using SPINOR_OP_READ_1_1_4_4B 0x6c, SPINOR_OP_PP_4B 0x12 and SPINOR_OP_BE_4K_4B 0x21 before enabling SFDP. After this patch, it parses the SFDP information and still uses the same opcodes. Set sector_size and n_sectors to zero as they will be discovered when parsing SFDP. Signed-off-by: Sudip Mukherjee <sudip.mukherjee@sifive.com> [tudor.ambarus@microchip.com: set sector_size and n_sectors to zero] Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Link: https://lore.kernel.org/r/20220920184808.44876-1-sudip.mukherjee@sifive.com
2022-11-21mtd: spi-nor: winbond: add support for W25Q512NW-IQJae Hyun Yoo1-0/+3
Add support for Winbond W25Q512NW-IQ/IN Signed-off-by: Jae Hyun Yoo <quic_jaehyoo@quicinc.com> Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Michael Walle <michael@walle.cc> Link: https://www.winbond.com/resource-files/W25Q512NW%20RevB%2007192021.pdf Link: https://lore.kernel.org/r/20220716000643.3541839-2-quic_jaehyoo@quicinc.com
2022-11-21mtd: spi-nor: micron-st: Enable locking for mt25qu256aEliav Farber1-0/+2
mt25qu256a [1] uses the 4 bit Block Protection scheme and supports Top/Bottom protection via the BP and TB bits of the Status Register. BP3 is located in bit 6 of the Status Register. Tested on MT25QU256ABA8ESF-0SIT. [1] https://www.micron.com/-/media/client/global/documents/products/data-sheet/nor-flash/serial-nor/mt25q/die-rev-a/mt25q_qljs_u_256_aba_0.pdf Signed-off-by: Eliav Farber <farbere@amazon.com> Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Reviewed-by: Michael Walle <michael@walle.cc> Link: https://lore.kernel.org/r/20221020092058.33844-1-farbere@amazon.com
2022-11-21mtd: spi-nor: Fix the number of bytes for the dummy cyclesAllen-KH Cheng1-1/+2
The number of bytes used by spi_nor_spimem_check_readop() may be incorrect for the dummy cycles. Since nor->read_dummy is not initialized before spi_nor_spimem_adjust_hwcaps(). We use both mode and wait state clock cycles instead of nor->read_dummy. Fixes: 0e30f47232ab ("mtd: spi-nor: add support for DTR protocol") Co-developed-by: Bayi Cheng <bayi.cheng@mediatek.com> Signed-off-by: Bayi Cheng <bayi.cheng@mediatek.com> Signed-off-by: Allen-KH Cheng <allen-kh.cheng@mediatek.com> Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Tested-by: Dhruva Gole <d-gole@ti.com> Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Reviewed-by: Pratyush Yadav <pratyush@kernel.org> Link: https://lore.kernel.org/r/20221031124633.13189-1-allen-kh.cheng@mediatek.com
2022-11-21mtd: spi-nor: gigadevice: gd25q256: replace gd25q256_default_init with ↵Yaliang Wang1-7/+17
gd25q256_post_bfpt When utilizing PARSE_SFDP to initialize the flash parameter, the deprecated initializing method spi_nor_init_params_deprecated() and the function spi_nor_manufacturer_init_params() within it will never be executed, which results in the default_init hook function will also never be executed. This is okay for 'D' generation of GD25Q256, because 'D' generation is implementing the JESD216B standards, it has QER field defined in BFPT, parsing the SFDP can properly set the quad_enable function. The 'E' generation also implements the JESD216B standards, and it has the same status register definitions as 'D' generation, parsing the SFDP to set the quad_enable function should also work for 'E' generation. However, the same thing can't apply to 'C' generation. 'C' generation 'GD25Q256C' implements the JESD216 standards, and it doesn't have the QER field defined in BFPT, since it does have QE bit in status register 1, the quad_enable hook needs to be tweaked to properly set the quad_enable function, this can be done in post_bfpt fixup hook. Fixes: 047275f7de18 ("mtd: spi-nor: gigadevice: gd25q256: Init flash based on SFDP") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Yaliang Wang <Yaliang.Wang@windriver.com> [tudor.ambarus@microchip.com: Update comment in gd25q256_post_bfpt] Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20221016171901.1483542-2-yaliang.wang@windriver.com
2022-11-21mtd: spi-nor: Fix formatting in spi_nor_read_raw() kerneldoc commentJonathan Neuschäfer1-2/+1
It doesn't make sense to put "set" on its own line like that. Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@gmx.net> Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Acked-by: Pratyush Yadav <pratyush@kernel.org> Link: https://lore.kernel.org/r/20221101162906.990125-1-j.neuschaefer@gmx.net
2022-11-21mtd: spi-nor: sysfs: print JEDEC ID for generic flash driverMichael Walle1-2/+4
We don't have a database entry for the generic SPI-NOR flash driver and thus we don't have a JEDEC ID to print. Print the (cached) JEDEC ID instead. Signed-off-by: Michael Walle <michael@walle.cc> Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Reviewed-by: Takahiro Kuwano <Takahiro.Kuwano@infineon.com> Link: https://lore.kernel.org/r/20220810220654.1297699-8-michael@walle.cc
2022-11-21mtd: spi-nor: add generic flash driverMichael Walle3-2/+52
Our SFDP parsing is everything we need to support all basic operations of a flash device. If the flash isn't found in our in-kernel flash database, gracefully fall back to a driver described solely by its SFDP tables. Signed-off-by: Michael Walle <michael@walle.cc> Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Tested-by: Tudor Ambarus <tudor.ambarus@microchip.com> Reviewed-by: Takahiro Kuwano <Takahiro.Kuwano@infineon.com> Link: https://lore.kernel.org/r/20220810220654.1297699-7-michael@walle.cc
2022-11-21mtd: spi-nor: fix select_uniform_erase to skip 0 erase sizeMichael Walle1-0/+4
4bait will set the erase size to 0 if there is no corresponding opcode for the 4byte erase. Fix spi_nor_select_uniform_erase to skip the 0 erase size to avoid mtd device registration failure cases. Reported-by: Jae Hyun Yoo <quic_jaehyoo@quicinc.com> Signed-off-by: Michael Walle <michael@walle.cc> Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Link: https://lore.kernel.org/r/20220810220654.1297699-6-michael@walle.cc
2022-11-21mtd: spi-nor: move function declaration out of sfdp.hMichael Walle2-2/+2
sfdp.h should only contain constants related to the JEDEC SFDP specification(s). Signed-off-by: Michael Walle <michael@walle.cc> Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Reviewed-by: Takahiro Kuwano <Takahiro.Kuwano@infineon.com> Link: https://lore.kernel.org/r/20220810220654.1297699-5-michael@walle.cc
2022-11-21mtd: spi-nor: remember full JEDEC flash IDMichael Walle2-1/+6
At the moment, we print the JEDEC ID that is stored in our database. The generic flash support won't have such an entry in our database. To find out the JEDEC ID later we will have to cache it. There is also another advantage: If the flash is found in the database, the ID could be truncated because the ID of the entry is used which can be shorter. Some flashes still holds valuable information in the bytes after the JEDEC ID and come in handy during debugging of when coping with INFO6() entries. These are not accessible for now. Save a copy of the ID bytes after reading and display it via debugfs. Signed-off-by: Michael Walle <michael@walle.cc> Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Reviewed-by: Takahiro Kuwano <Takahiro.Kuwano@infineon.com> Link: https://lore.kernel.org/r/20220810220654.1297699-4-michael@walle.cc
2022-11-21mtd: spi-nor: sysfs: hide manufacturer if it is not setMichael Walle1-0/+2
The manufacturer may be optional when pure SFDP flashes are supported. Hide the sysfs property if no manufacturer is set. Signed-off-by: Michael Walle <michael@walle.cc> Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Reviewed-by: Takahiro Kuwano <Takahiro.Kuwano@infineon.com> Link: https://lore.kernel.org/r/20220810220654.1297699-3-michael@walle.cc
2022-11-21mtd: spi-nor: hide jedec_id sysfs attribute if not presentMichael Walle1-0/+14
Some non-jedec compliant flashes (like the Everspin flashes) don't have an ID at all. Hide the attribute in this case. Fixes: 36ac02286265 ("mtd: spi-nor: add initial sysfs support") Signed-off-by: Michael Walle <michael@walle.cc> Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Reviewed-by: Takahiro Kuwano <Takahiro.Kuwano@infineon.com> Link: https://lore.kernel.org/r/20220810220654.1297699-2-michael@walle.cc
2022-11-21mtd: spi-nor: Check for zero erase size in spi_nor_find_best_erase_type()Alexander Sverdlin1-0/+2
Erase can be zeroed in spi_nor_parse_4bait() or spi_nor_init_non_uniform_erase_map(). In practice it happened with mt25qu256a, which supports 4K, 32K, 64K erases with 3b address commands, but only 4K and 64K erase with 4b address commands. Fixes: dc92843159a7 ("mtd: spi-nor: fix erase_type array to indicate current map conf") Signed-off-by: Alexander Sverdlin <alexander.sverdlin@nokia.com> Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20211119081412.29732-1-alexander.sverdlin@nokia.com
2022-10-25mtd: spi-nor: core: Add an error message when failing to exit the 4-byte ↵Tudor Ambarus1-2/+12
address mode Add an error message when failing to exit the 4-byte address mode. Do not stop the execution and go through the spi_nor_soft_reset() method if used, in the hope that the flash will default to 3-byte address mode after the reset. Suggested-by: Pratyush Yadav <p.yadav@ti.com> Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Reviewed-by: Pratyush Yadav <p.yadav@ti.com> Link: https://lore.kernel.org/r/20220728030159.68680-1-tudor.ambarus@microchip.com
2022-10-25mtd: spi-nor: micron-st.c: Replace hardcoded values for ↵Tudor Ambarus1-3/+7
addr_nbytes/addr_mode_nbytes We track in the core the internal address mode of the flash. Stop using hardcoded values for the number of bytes of address and use nor->addr_nbytes and nor->params->addr_mode_nbytes instead. Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Link: https://lore.kernel.org/r/20220728041451.85559-3-tudor.ambarus@microchip.com
2022-10-25mtd: spi-nor: spansion: Replace hardcoded values for ↵Tudor Ambarus1-5/+11
addr_nbytes/addr_mode_nbytes We track in the core the internal address mode of the flash. Stop using hardcoded values for the number of bytes of address and use nor->addr_nbytes and nor->params->addr_mode_nbytes instead. Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Tested-by: Takahiro Kuwano <Takahiro.Kuwano@infineon.com> Link: https://lore.kernel.org/r/20220728041451.85559-2-tudor.ambarus@microchip.com
2022-10-25mtd: spi-nor: spansion: Add s28hl512t, s28hl01gt, and s28hs01gt infoTakahiro Kuwano1-0/+12
Add flash info table entries for s28hl512gt, s28hl01gt, and s28hs01gt. These devices have the same functionality as s28hs512t. Signed-off-by: Takahiro Kuwano <Takahiro.Kuwano@infineon.com> Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Link: https://lore.kernel.org/r/6350ac204c58b94b30d70c529bf194d953085ac6.1661915569.git.Takahiro.Kuwano@infineon.com
2022-10-25mtd: spi-nor: spansion: Rename s28hs512t prefixTakahiro Kuwano1-10/+10
Change prefix to support all other devices in SEMPER S28 family. Signed-off-by: Takahiro Kuwano <Takahiro.Kuwano@infineon.com> Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Reviewed-by: Michael Walle <michael@walle.cc> Link: https://lore.kernel.org/r/8cf6bc9bffd50e486867c0817de1fa56c5d308ec.1661915569.git.Takahiro.Kuwano@infineon.com
2022-10-25mtd: spi-nor: spansion: Remove NO_SFDP_FLAGS from s28hs512t infoTakahiro Kuwano1-9/+8
Read, Page Program, and Sector Erase settings are done in SFDP so we can remove NO_SFDP_FLAGS from s28hs512t info. Since the default_init() is no longer called after removing NO_SFDP_FLAGS, the initialization in the default_init() is moved to late_init(). Signed-off-by: Takahiro Kuwano <Takahiro.Kuwano@infineon.com> Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Link: https://lore.kernel.org/r/12e468992f5d0cbd474abff3203100cc8163d4e5.1661915569.git.Takahiro.Kuwano@infineon.com
2022-10-25mtd: spi-nor: sfdp: Update params->hwcaps.mask at xSPI profile 1.0 table parseTakahiro Kuwano1-0/+7
Existece of xSPI profile 1.0 table implies that the flash supports read and program in 8D-8D-8D mode. Update the params->hwcaps.mask in spi_nor_parase_profile1(). Signed-off-by: Takahiro Kuwano <Takahiro.Kuwano@infineon.com> Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Link: https://lore.kernel.org/r/1b449bae6978f11f7636f2b5acb6435723963f59.1661915569.git.Takahiro.Kuwano@infineon.com
2022-10-25mtd: spi-nor: Add support for flash resetSai Krishna Potthuri1-0/+25
Add support for spi-nor flash reset via GPIO controller by reading the reset-gpio property. If there is a valid GPIO specifier then reset will be performed by asserting and deasserting the GPIO using gpiod APIs otherwise it will not perform any operation. Signed-off-by: Sai Krishna Potthuri <sai.krishna.potthuri@amd.com> Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Reviewed-by: Michael Walle <michael@walle.cc> Link: https://lore.kernel.org/r/20220908064428.2962-3-sai.krishna.potthuri@amd.com
2022-10-18mtd: spi-nor: core: Ignore -ENOTSUPP in spi_nor_init()Mika Westerberg1-1/+3
The Intel SPI-NOR controller does not support the 4-byte address opcode so ->set_4byte_addr_mode() ends up returning -ENOTSUPP and the SPI flash chip probe fail like this: [ 12.291082] spi-nor: probe of spi0.0 failed with error -524 Whereas previously before commit 08412e72afba ("mtd: spi-nor: core: Return error code from set_4byte_addr_mode()") it worked just fine. Fix this by ignoring -ENOTSUPP in spi_nor_init(). Fixes: 08412e72afba ("mtd: spi-nor: core: Return error code from set_4byte_addr_mode()") Cc: stable@vger.kernel.org Reported-by: Hongyu Ning <hongyu.ning@intel.com> Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Michael Walle <michael@walle.cc> Acked-by: Tudor Ambarus <tudor.ambarus@microchip.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20220923093441.3178-1-mika.westerberg@linux.intel.com
2022-07-28mtd: spi-nor: fix spi_nor_spimem_setup_op() call in ↵Patrice Chotard1-3/+3
spi_nor_erase_{sector,chip}() For erase operations, reg_proto must be used as indicated in struct spi_nor description in spi-nor.h. This issue was found when DT property spi-tx-bus-width is set to 4. In this case the spi_mem_op->addr.buswidth is set to 4 for erase command which is not correct. Tested on stm32mp157c-ev1 board with mx66l51235f spi-nor. Fixes: 0e30f47232ab ("mtd: spi-nor: add support for DTR protocol") Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com> [ta: use nor->reg_proto in spi_nor_controller_ops_erase()] Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Tested-by: Alexander Sverdlin <alexander.sverdlin@nokia.com> Reviewed-by: Pratyush Yadav <p.yadav@ti.com> Link: https://lore.kernel.org/r/20220629133013.3382393-1-patrice.chotard@foss.st.com
2022-07-28mtd: spi-nor: spansion: Add s25hl-t/s25hs-t IDs and fixupsTakahiro Kuwano1-0/+132
The S25HL-T/S25HS-T family is the Infineon SEMPER Flash with Quad SPI. These Infineon chips support volatile version of configuration registers and it is recommended to update volatile registers in the field application due to a risk of the non-volatile registers corruption by power interrupt. Add support for volatile QE bit. For the single-die package parts (512Mb and 1Gb), only bottom 4KB and uniform sector sizes are supported. This is due to missing or incorrect entries in SMPT. Fixup for other sector sizes configurations will be followed up as needed. Tested on Xilinx Zynq-7000 FPGA board. Signed-off-by: Takahiro Kuwano <Takahiro.Kuwano@infineon.com> Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Acked-by: Michael Walle <michael@walle.cc> Link: https://lore.kernel.org/r/20220725092505.446315-8-tudor.ambarus@microchip.com
2022-07-28mtd: spi-nor: spansion: Add local function to discover page sizeTakahiro Kuwano1-22/+31
The page size check in s28hs512t fixup can be used for s25hs/hl-t as well. Move that to a newly created local function. Signed-off-by: Takahiro Kuwano <Takahiro.Kuwano@infineon.com> Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Reviewed-by: Michael Walle <michael@walle.cc> Link: https://lore.kernel.org/r/20220725092505.446315-7-tudor.ambarus@microchip.com
2022-07-28mtd: spi-nor: core: Track flash's internal address modeTudor Ambarus2-1/+8
We need to track the flash's internal address mode as there are flashes that can operate with 4B opcodes but unfortunately do not have a 4B opcode correspondent for all the 3B opcodes. Such an example is the Infineon Semper chips which provide 4B opcodes for read/program/erase but do not provide 4B opcodes for Read/Write Any Register. These registers are indexed by address and require the internal address mode of the flash before Read/Write Any Register opcodes are issued. 4B opcodes are preferred over changing the flash's address mode to 4byte, as set_4byte_addr_mode could be done in a non-volatile way and could break the boot sequence. Thus we need to track the flash's internal address mode so that we can use 4B opcodes together with opcodes that don't have a 4B opcode correspondent. Track flash's internal address mode. addr_mode_nbytes is discovered when parsing BFPT. For the BFPT_DWORD1_ADDRESS_BYTES_3_OR_4 case, one could introduce a method that queries the flash's internal address mode at run-time (works for Winbond). If a run-time querying can not be accomplished or if SFDP is not defined at all, but the address mode is volatile and resets to a default known value at boot, one can change the default addr_mode_nbytes value of 3 by introducing a flash_info flag. If the address mode can not be queried, discovered and it is configured via a non-volatile register, we may introduce a dt property, but it will harm the generic approach of the jedec,spi-nor compatible. All this complexity is not needed now, so let it for future development. Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Reviewed-by: Takahiro Kuwano <Takahiro.Kuwano@infineon.com> Reviewed-by: Michael Walle <michael@walle.cc> Link: https://lore.kernel.org/r/20220725092505.446315-6-tudor.ambarus@microchip.com
2022-07-28mtd: spi-nor: core: Return error code from set_4byte_addr_mode()Takahiro Kuwano1-1/+1
The prams->set_4byte_addr_mode returns error code but is not handled in spi_nor_init(). Handle the return code from set_4byte_addr_mode(). Suggested-by: Michael Walle <michael@walle.cc> Signed-off-by: Takahiro Kuwano <Takahiro.Kuwano@infineon.com> Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Reviewed-by: Pratyush Yadav <p.yadav@ti.com> Reviewed-by: Michael Walle <michael@walle.cc> Link: https://lore.kernel.org/r/20220725092505.446315-5-tudor.ambarus@microchip.com
2022-07-28mtd: spi-nor: Do not change nor->addr_nbytes at SFDP parsing timeTudor Ambarus4-8/+9
At the SFDP parsing time we should not change members of struct spi_nor, but instead fill members of struct spi_nor_flash_parameters which could later on be used by callers. The caller will then decide if SFDP params should be used and more importantly when they should be used. Clean the code flow and don't initialize nor->addr_nbytes at SFDP parsing time. Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Tested-by: Takahiro Kuwano <Takahiro.Kuwano@infineon.com> Reviewed-by: Michael Walle <michael@walle.cc> Reviewed-by: Pratyush Yadav <p.yadav@ti.com> Link: https://lore.kernel.org/r/20220725092505.446315-4-tudor.ambarus@microchip.com
2022-07-28mtd: spi-nor: core: Shrink the storage size of the flash_info's addr_nbytesTudor Ambarus1-1/+1
The maximum number of address bytes in SPI NOR is 4. Shrink the storage size of the flash_info's addr_nbytes. Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Reviewed-by: Michael Walle <michael@walle.cc> Reviewed-by: Pratyush Yadav <p.yadav@ti.com> Link: https://lore.kernel.org/r/20220725092505.446315-3-tudor.ambarus@microchip.com
2022-07-28mtd: spi-nor: s/addr_width/addr_nbytesTudor Ambarus9-66/+66
Address width was an unfortunate name, as it means the number of IO lines used for the address, whereas in the code it is used as the number of address bytes. s/addr_width/addr_nbytes throughout the entire SPI NOR framework. Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Reviewed-by: Michael Walle <michael@walle.cc> Acked-by: Pratyush Yadav <p.yadav@ti.com> Link: https://lore.kernel.org/r/20220725092505.446315-2-tudor.ambarus@microchip.com
2022-07-19mtd: spi-nor: esmt: Use correct name of f25l32qaSungbo Eo1-1/+1
The flash ID of F25L32QA is 0x8c4016, whereas that of F25L32QA(2S) is 0x8c4116. F25L32QA(2S) is the newer version of F25L32QA and its BPn bits are non-volatile, unlike its older version. Signed-off-by: Sungbo Eo <mans0n@gorani.run> Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Reviewed-by: Michael Walle <michael@walle.cc> Link: https://lore.kernel.org/r/20210723141232.15659-1-mans0n@gorani.run Datasheet: https://www.esmt.com.tw/upload/pdf/ESMT/datasheets/F25L32QA.pdf Datasheet: https://www.esmt.com.tw/upload/pdf/ESMT/datasheets/F25L32QA_1(2S).pdf
2022-07-19mtd: spi-nor: micron-st: Skip FSR reading if SPI controller does not support itMika Westerberg1-2/+10
The Intel SPI controller does not support low level operations, like reading the flag status register (FSR). It only exposes a set of high level operations for software to use. For this reason check the return value of micron_st_nor_read_fsr() and if the operation was not supported, use the status register value only. This allows the chip to work even when attached to Intel SPI controller (there are such systems out there). Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Reviewed-by: Michael Walle <michael@walle.cc> Link: https://lore.kernel.org/r/20220506105158.43613-1-mika.westerberg@linux.intel.com
2022-06-27mtd: spi-nor: move SECT_4K_PMC special handlingMichael Walle3-10/+22
The SECT_4K_PMC flag will set a device specific opcode for the 4k sector erase. Instead of handling it in the core, we can move it to a late_init(). In that late init, loop over all erase types, look for the 4k size and replace the opcode. Signed-off-by: Michael Walle <michael@walle.cc> Signed-off-by: Pratyush Yadav <p.yadav@ti.com> Link: https://lore.kernel.org/r/20220418112650.2791459-1-michael@walle.cc
2022-05-25Merge tag 'spi-v5.19' of ↵Linus Torvalds3-932/+0
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi Pull spi updates from Mark Brown: "This is quite a quiet release but some new drivers mean that the diffstat is fairly large. The new drivers include the aspeed driver which is migrated from MTD as part of the ongoing move of controllers with specialised support for SPI flashes into the SPI subsystem. - Support for devices which flip CPHA during recieve only transfers (eg, if MOSI and MISO have inverted polarity). - Overhaul of the i.MX driver, including the addition of PIO support for better performance on small transfers. - Migration of the Aspeed driver from MTD. - Support for Aspeed AST2400, Ingenic JZ4775 and X1/2000 and MediaTek IPM and SFI" * tag 'spi-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (84 commits) spi: spi-au1550: replace ternary operator with min() mtd: spi-nor: aspeed: set the decoding size to at least 2MB for AST2600 spi: aspeed: Calibrate read timings spi: aspeed: Add support for the AST2400 SPI controller spi: aspeed: Workaround AST2500 limitations spi: aspeed: Adjust direct mapping to device size spi: aspeed: Add support for direct mapping spi: spi-mem: Convert Aspeed SMC driver to spi-mem spi: Convert the Aspeed SMC controllers device tree binding spi: spi-cadence: Update ISR status variable type to irqreturn_t spi: Doc fix - Describe add_lock and dma_map_dev in spi_controller spi: cadence-quadspi: Handle spi_unregister_master() in remove() spi: stm32-qspi: Remove SR_BUSY bit check before sending command spi: stm32-qspi: Always check SR_TCF flags in stm32_qspi_wait_cmd() spi: stm32-qspi: Fix wait_cmd timeout in APM mode spi: cadence-quadspi: remove unnecessary (void *) casts spi: cadence-quadspi: Add missing blank line in cqspi_request_mmap_dma() spi: spi-imx: mx51_ecspi_prepare_message(): skip writing MX51_ECSPI_CONFIG register if unchanged spi: spi-imx: add PIO polling support spi: spi-imx: replace struct spi_imx_data::bitbang by pointer to struct spi_controller ...
2022-05-16spi: spi-mem: Convert Aspeed SMC driver to spi-memCédric Le Goater3-932/+0
This SPI driver adds support for the Aspeed static memory controllers of the AST2600, AST2500 and AST2400 SoCs using the spi-mem interface. * AST2600 Firmware SPI Memory Controller (FMC) . BMC firmware . 3 chip select pins (CE0 ~ CE2) . Only supports SPI type flash memory . different segment register interface . single, dual and quad mode. * AST2600 SPI Flash Controller (SPI1 and SPI2) . host firmware . 2 chip select pins (CE0 ~ CE1) . different segment register interface . single, dual and quad mode. * AST2500 Firmware SPI Memory Controller (FMC) . BMC firmware . 3 chip select pins (CE0 ~ CE2) . supports SPI type flash memory (CE0-CE1) . CE2 can be of NOR type flash but this is not supported by the driver . single, dual mode. * AST2500 SPI Flash Controller (SPI1 and SPI2) . host firmware . 2 chip select pins (CE0 ~ CE1) . single, dual mode. * AST2400 New Static Memory Controller (also referred as FMC) . BMC firmware . New register set . 5 chip select pins (CE0 ∼ CE4) . supports NOR flash, NAND flash and SPI flash memory. . single, dual and quad mode. Each controller has a memory range on which flash devices contents are mapped. Each device is assigned a window that can be changed at bootime with the Segment Address Registers. Each SPI flash device can then be accessed in two modes: Command and User. When in User mode, SPI transfers are initiated with accesses to the memory segment of a device. When in Command mode, memory operations on the memory segment of a device generate SPI commands automatically using a Control Register for the settings. This initial patch adds support for User mode. Command mode needs a little more work to check that the memory window on the AHB bus fits the device size. It will come later when support for direct mapping is added. Single and dual mode RX transfers are supported. Other types than SPI are not supported. Reviewed-by: Joel Stanley <joel@jms.id.au> Tested-by: Joel Stanley <joel@jms.id.au> Tested-by: Tao Ren <rentao.bupt@gmail.com> Tested-by: Jae Hyun Yoo <quic_jaehyoo@quicinc.com> Signed-off-by: Chin-Ting Kuo <chin-ting_kuo@aspeedtech.com> Signed-off-by: Cédric Le Goater <clg@kaod.org> Link: https://lore.kernel.org/r/20220509175616.1089346-4-clg@kaod.org Signed-off-by: Mark Brown <broonie@kernel.org>
2022-05-12mtd: spi-nor: debugfs: fix format specifierMichael Walle1-1/+1
The intention was to print the JEDEC ID in the following format: nn nn nn In this case format specifier has to be "%*ph". Fix it. Fixes: 0257be79fc4a ("mtd: spi-nor: expose internal parameters via debugfs") Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Michael Walle <michael@walle.cc> Signed-off-by: Pratyush Yadav <p.yadav@ti.com> Link: https://lore.kernel.org/r/20220512112027.3771734-1-michael@walle.cc
2022-05-09mtd: spi-nor: support eon en25qh256a variantLeon M. George1-1/+2
This patch allows accessing the upper 16m on the A variant (EN25QH256A) of the EN25QH256 that shares same JEDEC ID. Without this patch, addr_with is detected to be '4' but the read_opcode is a plain READ (supporting only 3 byte addresses). Setting PARSE_SFDP is enough to detect the read_opcode READ_4B on the A variant. READ_4B is not available on the no-A variant. Both variants support 4-byte address mode (spi_nor_set_4byte_addr_mode) but that is prone to breaking on unexpected reboots if the reset pin isn't connected (broken-flash-reset). The no-A variant supports a 'high bank latch mode' that affects read, program, and erase commands - similar to the extended address register (EAR). The HBL bit is manipulated using the ENHBL (0x67) and EXHBL (0x98) opcodes. Should it become necessary to distinguish the two variants in the future, the A variant sets the SNOR_HWCAPS_READ_1_1_4 SFDP param - the no-A variant doesn't. Tested with and without fast read on the A variant only. Signed-off-by: Leon M. George <leon@georgemail.eu> Signed-off-by: Pratyush Yadav <p.yadav@ti.com> Reviewed-by: Michael Walle <michael@walle.cc> Link: https://lore.kernel.org/r/20220502233310.791565-2-leon@georgemail.eu
2022-05-09mtd: spi-nor: winbond: add support for W25Q512NW-IMShaik Sajida Bhanu1-0/+3
Add support for winbond W25Q512NW-IM chip. Below are the tests done: 1. Verified flashing binary image on spi card using flashrom tool. 2. Verified OTP support, below are the test results: localhost / # cat /sys/bus/platform/devices/soc\@0/88dc000.spi/spi_master/spi16/ spi16.0/spi-nor/jedec_id ef8020 localhost / # cat /sys/bus/platform/devices/soc\@0/88dc000.spi/spi_master/spi16/ spi16.0/spi-nor/manufacturer winbond localhost / # cat /sys/bus/platform/devices/soc\@0/88dc000.spi/spi_master/spi16/ spi16.0/spi-nor/partname w25q512nwm localhost / # hexdump /sys/bus/platform/devices/soc\@0/88dc000.spi/spi_master/sp i16/spi16.0/spi-nor/sfdp 0000000 4653 5044 0106 ff01 0600 1001 0080 ff00 0000010 0084 0201 00d0 ff00 ffff ffff ffff ffff 0000020 6800 6c65 6f6c 7720 726f 646c ffff ffff 0000030 ffff ffff ffff ffff ffff ffff ffff ffff * 0000080 20e5 fffb ffff 1fff eb44 6b08 3b08 bb42 0000090 fffe ffff ffff 0000 ffff eb40 200c 520f 00000a0 d810 0000 0233 00a6 e781 d914 63e9 3376 00000b0 757a 757a bdf7 5cd5 f719 ff5d 70e9 a5f9 00000c0 ffff ffff ffff ffff ffff ffff ffff ffff 00000d0 0aff fff0 ff21 ffdc 00000d8 localhost / # md5sum /sys/bus/platform/devices/soc\@0/88dc000.spi/spi_master/spi 16/spi16.0/spi-nor/sfdp 106d89d6c049110bc94c01517cb4ce24 /sys/bus/platform/devices/soc@0/88dc000.spi/ spi_master/spi16/spi16.0/spi-nor/sfdp Signed-off-by: Shaik Sajida Bhanu <quic_c_sbhanu@quicinc.com> Signed-off-by: Pratyush Yadav <p.yadav@ti.com> Reviewed-by: Doug Anderson <dianders@chromium.org> Reviewed-by: Michael Walle <michael@walle.cc> Link: https://lore.kernel.org/r/1651234239-32217-1-git-send-email-quic_c_sbhanu@quicinc.com
2022-05-09mtd: spi-nor: expose internal parameters via debugfsMichael Walle4-0/+259
There is no way to gather all information to verify support for a new flash chip. Also if you want to convert an existing flash chip to the new SFDP parsing, there is not enough information to determine if the flash will work like before. To ease this development, expose internal parameters via the debugfs. Signed-off-by: Michael Walle <michael@walle.cc> Signed-off-by: Pratyush Yadav <p.yadav@ti.com> Reviewed-by: Pratyush Yadav <p.yadav@ti.com> Link: https://lore.kernel.org/r/20220429102018.2361038-2-michael@walle.cc
2022-05-09mtd: spi-nor: export spi_nor_hwcaps_pp2cmd()Michael Walle2-1/+2
The function will also be used by the debugfs module. Signed-off-by: Michael Walle <michael@walle.cc> Signed-off-by: Pratyush Yadav <p.yadav@ti.com> Reviewed-by: Pratyush Yadav <p.yadav@ti.com> Link: https://lore.kernel.org/r/20220429102018.2361038-1-michael@walle.cc
2022-05-02mtd: spi-nor: move spi_nor_write_ear() to winbond moduleMichael Walle3-38/+41
The "Extended Address Register" is winbond specific. If the flash is larger than 16MiB and is used in 3 byte address mode, it is used to set the remaining address bits. Move the write_ear() function, the opcode macros and the spimem op template into the winbond module and rename them accordingly. Signed-off-by: Michael Walle <michael@walle.cc> Signed-off-by: Pratyush Yadav <p.yadav@ti.com> Reviewed-by: Pratyush Yadav <p.yadav@ti.com> Link: https://lore.kernel.org/r/20220429100153.2338501-1-michael@walle.cc
2022-04-29mtd: spi-nor: amend the rdsr dummy cycles documentationMichael Walle1-2/+3
The rdsr dummy cycles are only used by the 8d-8d-8d mode. Mention that in the documentation. Signed-off-by: Michael Walle <michael@walle.cc> Signed-off-by: Pratyush Yadav <p.yadav@ti.com> Reviewed-by: Pratyush Yadav <p.yadav@ti.com> Link: https://lore.kernel.org/r/20220418112837.2792242-1-michael@walle.cc
2022-04-27mtd: spi-nor: micron-st: Remove status polling on volatile registers writeTudor Ambarus1-3/+0
Writing volatile registers are instant according to Micron and do not need any status polling. Remove status polling on volatile registers write. Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Signed-off-by: Pratyush Yadav <p.yadav@ti.com> Reviewed-by: Michael Walle <michael@walle.cc> Link: https://lore.kernel.org/r/20220420103427.47867-12-tudor.ambarus@microchip.com
2022-04-27mtd: spi-nor: spansion: Remove status polling on volatile registers writeTudor Ambarus1-4/+0
Writing volatile registers are instant according to Cypress and do not need any status polling. Remove status polling on volatile registers write. Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Signed-off-by: Pratyush Yadav <p.yadav@ti.com> Reviewed-by: Michael Walle <michael@walle.cc> Link: https://lore.kernel.org/r/20220420103427.47867-11-tudor.ambarus@microchip.com
2022-04-27mtd: spi-nor: Introduce templates for SPI NOR operationsTudor Ambarus5-107/+158
Clean the op declaration and hide the details of each op. With this it results a cleanner, easier to read code. No functional change expected. Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Signed-off-by: Pratyush Yadav <p.yadav@ti.com> Acked-by: Michael Walle <michael@walle.cc> Acked-by: Pratyush Yadav <p.yadav@ti.com> Link: https://lore.kernel.org/r/20220420103427.47867-10-tudor.ambarus@microchip.com
2022-04-27mtd: spi-nor: spansion: Rework spi_nor_cypress_octal_dtr_enable()Tudor Ambarus1-59/+69
Introduce template operation to remove code duplication. Split spi_nor_cypress_octal_dtr_enable() in spi_nor_cypress_octal_dtr_ena() spi_nor_cypress_octal_dtr_dis() as it no longer made sense to try to keep everything alltogether: too many "if (enable)" throughout the code, which made the code difficult to read. Add debug messages in case spi_nor_read_id() fails. Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Signed-off-by: Pratyush Yadav <p.yadav@ti.com> Reviewed-by: Pratyush Yadav <p.yadav@ti.com> Reviewed-by: Michael Walle <michael@walle.cc> Link: https://lore.kernel.org/r/20220420103427.47867-9-tudor.ambarus@microchip.com
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-24 20:52:44 +0300