summaryrefslogtreecommitdiff
path: root/drivers/mtd/nand
AgeCommit message (Collapse)AuthorFilesLines
2013-10-28mtd: diskonchip: Fix incorrect placement of __initdataSachin Kamat1-1/+1
__initdata should be placed between the variable name and equal sign for the variable to be placed in the intended section. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2013-10-28mtd: nand: fix the wrong mtd->type for nand chipHuang Shijie1-1/+1
Current code sets the mtd->type with MTD_NANDFLASH for both SLC and MLC. So the jffs2 may supports the MLC nand, but in actually, the jffs2 should not support the MLC. This patch uses the nand_is_slc() to check the nand cell type, and set the mtd->type with the right nand type. After this patch, the jffs2 only supports the SLC nand. The side-effect of this patch: Before this patch, the ioctl(MEMGETINFO) can only return with the MTD_NANDFLASH; but after this patch, the ioctl(MEMGETINFO) will return with the MTD_NANDFLASH for SLC, and MTD_MLCNANDFLASH for MLC. So the user applictions(such as mtd-utils) should also changes a little for this. Signed-off-by: Huang Shijie <b32955@freescale.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2013-10-28mtd: gpmi: rewrite the gpmi_ecc_write_oob() to support the jffs2Huang Shijie1-9/+20
When we use the ECC info which is get from the nand chip's datasheet, we may have some freed oob area now. This patch rewrites the gpmi_ecc_write_oob() to implement the ecc.write_oob(). We also update the comment for gpmi_hw_ecclayout. Yes! We can support the JFFS2 for the SLC nand now. Signed-off-by: Huang Shijie <b32955@freescale.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2013-10-28mtd: nand: print out the cell information for nand chipHuang Shijie1-4/+6
Print out the cell information for nand chip. (Since the message is too long, this patch also splits the log with two separate pr_info()) Signed-off-by: Huang Shijie <b32955@freescale.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2013-10-28mtd: nand: set the cell information for ONFI nandHuang Shijie1-0/+1
The current code does not set the SLC/MLC information for onfi nand. (This makes that the kernel treats all the onfi nand as SLC nand.) This patch fills the cell information for ONFI nands. Signed-off-by: Huang Shijie <b32955@freescale.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2013-10-28mtd: nand: add the "bits per cell" info for legacy ID NANDHuang Shijie1-0/+3
The legacy ID NAND are all SLC. This patch sets 1 to the @bits_per_cell for the legacy ID NAND, which means they are all SLC. Signed-off-by: Huang Shijie <b32955@freescale.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2013-10-28mtd: nand: rename the cellinfo to bits_per_cellHuang Shijie1-2/+12
The @cellinfo fields contains unused information, such as write caching, internal chip numbering, etc. But we only use it to check the SLC or MLC. This patch tries to make it more clear and simple, renames the @cellinfo to @bits_per_cell. In order to avoiding the bisect issue, this patch also does the following changes: (0) add a macro NAND_CI_CELLTYPE_SHIFT to avoid the hardcode. (1) add a helper to parse out the cell type : nand_get_bits_per_cell() (2) parse out the cell type for extended-ID chips and the full-id nand chips. Signed-off-by: Huang Shijie <b32955@freescale.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2013-10-28mtd: nand: add a helper to check the SLC/MLC nand chipHuang Shijie2-9/+7
Add a helper to check if a nand chip is SLC or MLC. This helper makes the code more readable. Signed-off-by: Huang Shijie <b32955@freescale.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2013-10-28mtd: nand: correct extemded param page error handlingBrian Norris1-4/+5
If the ONFI extended parameter page gives codeword_size == 0, the extended ECC information is corrupt and should not be used. Currently, we (correctly) avoid using the information, but we don't report the error to the caller, so the caller doesn't know that we didn't initialize ecc_strength_ds and ecc_step_ds. Now the caller can warn the user that it does not have sufficient information. This also removes the false and useless "ONFI extended param page detected" debug message (it was printed even on the aforementioned corruption, and for the success case, we don't really want a print). Signed-off-by: Brian Norris <computersforpeace@gmail.com> Acked-by: Huang Shijie <b32955@freescale.com>
2013-10-28mtd: atmel_nand: use minimum ecc requirements of nand: ecc_{strength,step}_dsJosh Wu1-37/+9
Since ecc_{strength,step}_ds is introduced in nand_chip structure for minimum ecc requirements. So we can use them directly and remove our own get_onfi_ecc_param function. Signed-off-by: Josh Wu <josh.wu@atmel.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2013-10-28mtd: atmel_nand: add MODULE_DEVICE_TABLE for nfc driverJosh Wu1-1/+2
This patch also add a const keyword for the of_device_id of nfc. Signed-off-by: Josh Wu <josh.wu@atmel.com> Acked-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2013-10-28mtd: atmel_nand: remove #if defined(CONFIG_OF) around OF-specific codeJosh Wu1-14/+3
Since the of specific code are declared in <linux/of_mtd.h> regardless of CONFIG_OF. Remove the #if defined(CONFIG_OF) guard and use an IS_ENABLED(CONFIG_OF) instead. Thanks to Ezequiel Garcia's for this protype. Signed-off-by: Josh Wu <josh.wu@atmel.com> Acked-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2013-10-28mtd: nand: cleanup ONFI printed errors, warningsBrian Norris1-9/+15
The ONFI detection routine is too verbose in some cases and not verbose enough in others. This patch refactors it to print only when there are significant warnings/errors. Probing in 16-bit mode: It is unnecessary to print until after the READID (address 20h) command. READID *has* to work properly in whatever bus width configuration we are in, or else no identification mode works. So we can silence some useless warnings on systems which come up in 16-bit mode and do not even respond with an O-N-F-I string. Valid parameter page: Nobody needs to see this. Do we inform the user every time other hardware responds properly? Instead, add an error message if *no* uncorrupted parameter pages are found. ONFI ECC: Most drivers don't yet use the reported minimum ECC values, so it shouldn't yet be a fatal condition if the extended parameter page is incorrect. But we should at least give a warning for the corner cases that we don't expect. ONFI flash detected: Nobody needs to see this. This is the expected case, that we detect ONFI properly, or else it wasn't ONFI-compliant and is detected by some other routine. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Cc: Huang Shijie <b32955@freescale.com> Cc: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
2013-10-28mtd: nand: remove obsolete 'ecclayout' fieldBrian Norris2-4/+0
This field is never used, except to print it out. Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2013-10-28mtd: denali: make init function staticBrian Norris1-1/+1
It's only used in this file. Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2013-10-28mtd: nand: stop exporting nand_default_bbtBrian Norris1-1/+0
I removed the last non-nand_base users of this, and we shouldn't have any more modules that need to access it. It's only non-static to share between nand_base and nand_bbt. Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2013-10-28mtd: nandsim: don't call nand_default_bbt() directlyBrian Norris1-1/+1
We want the default nand_chip.scan_bbt() function, so just use the proper indirection. Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2013-10-28mtd: nand: lpc32xx_slc: don't call nand_default_bbt directlyBrian Norris1-8/+0
This driver is doing some strange logic here. If it doesn't have flash-based BBT enabled, it allows nand_scan_tail() to scan the BBT. But if it is using flash-based BBT, it tells nand_scan_tail() to skip scanning, then it immediately calls the default BBT scanning function itself. As I read it, this logic is equivalent to the default nand_scan_tail() behavior without interfering with NAND_SKIP_BBTSCAN or calling nand_default_bbt() directly at all. Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2013-10-28nand: docg4: use nand_base's default BBT scanBrian Norris1-1/+0
There's no point in the low level driver doing the work that nand_base already is doing; just let nand_base set the default BBT scanning function. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Acked-by: Mike Dunn <mikedunn@newsguy.com>
2013-10-28mtd: nand: gpmi-nand: janitorial cleanup: (commas after last element of ↵Lothar Waßmann1-4/+4
struct initializer) Acked-by: Huang Shijie <b32955@freescale.com> Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2013-10-25mtd: gpmi: fix ECC regressionDavid Woodhouse1-1/+1
The "legacy" ECC layout used until 3.12-rc1 uses all the OOB area by computing the ECC strength and ECC step size ourselves. Commit 2febcdf84b ("mtd: gpmi: set the BCHs geometry with the ecc info") makes the driver use the ECC info (ECC strength and ECC step size) provided by the MTD code, and creates a different NAND ECC layout for the BCH, and use the new ECC layout. This causes a regression: We can not mount the ubifs which was created by the old NAND ECC layout. This patch fixes this issue by reverting to the legacy ECC layout. We will probably introduce a new device-tree property to indicate that the new ECC layout can be used. For now though, for the imminent 3.12 release, we just unconditionally revert to the 3.11 behaviour. This leaves a harmless cosmetic warning about an unused function. At this point in the cycle I really don't care. Signed-off-by: David Woodhouse <David.Woodhouse@intel.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com> Acked-by: Huang Shijie <b32955@freescale.com> Acked-by: Marek Vasut <marex@denx.de> Tested-by: Marek Vasut <marex@denx.de>
2013-10-25file->f_op is never NULL...Al Viro1-1/+1
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-10-25mtd: nand: pxa3xx: Fix registered MTD nameEzequiel Garcia1-1/+6
In a recent commit: commit f455578dd961087a5cf94730d9f6489bb1d355f0 Author: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Date: Mon Aug 12 14:14:53 2013 -0300 mtd: nand: pxa3xx: Remove hardcoded mtd name There's no advantage in using a hardcoded name for the mtd device. Instead use the provided by the platform_device. The MTD name was changed to use the one provided by the platform_device. However, this can be problematic as some users want to set partitions using the kernel parameter 'mtdparts', where the name is needed. Therefore, to avoid regressions in users relying in 'mtdparts' we revert the change and use the previous one 'pxa3xx_nand-0'. While at it, let's put a big comment and prevent this change from happening ever again. Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2013-10-20Merge 3.12-rc6 into driver-core-nextGreg Kroah-Hartman1-5/+3
We want these fixes here too. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-10-14treewide: Fix typo in printkMasanari Iida1-1/+1
Correct spelling typo within various part of the kernel Signed-off-by: Masanari Iida <standby24x7@gmail.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-10-10drivers: clean-up prom.h implicit includesRob Herring6-0/+8
Powerpc is a mess of implicit includes by prom.h. Add the necessary explicit includes to drivers in preparation of prom.h cleanup. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Acked-by: Grant Likely <grant.likely@linaro.org>
2013-09-27mtd: nand: fix memory leak in ONFI extended parameter pageBrian Norris1-5/+3
This fixes a memory leak in the ONFI support code for detecting the required ECC levels from this commit: commit 6dcbe0cdd83fb5f77be4f44c9e06c535281c375a Author: Huang Shijie <b32955@freescale.com> Date: Wed May 22 10:28:27 2013 +0800 mtd: get the ECC info from the Extended Parameter Page In the success case, we never freed the 'ep' buffer. Also, this fixes an oversight in the same commit where we (harmlessly) freed the NULL pointer. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Acked-by: Huang Shijie <b32955@freescale.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2013-09-27mtd: atmel_nand: fix deferred probe from __initJohan Hovold1-6/+7
Move probe out of __init section and don't use platform_driver_probe which cannot be used with deferred probing. Since commit e9354576 ("gpiolib: Defer failed gpio requests by default") this driver might return -EPROBE_DEFER if a gpio_request fails. Cc: David Woodhouse <dwmw2@infradead.org> Cc: Josh Wu <josh.wu@atmel.com> Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-17mtd: nand: pxa3xx: Remove unneeded ifdef CONFIG_OFEzequiel Garcia1-7/+0
There's no need to enclose this code within idef CONFIG_OF, because the OF framework provides no-op stubs if CONFIG_OF=n. Cc: devicetree@vger.kernel.org Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-09-09Merge tag 'for-linus-20130909' of git://git.infradead.org/linux-mtdLinus Torvalds37-1671/+1724
Pull mtd updates from David Woodhouse: - factor out common code from MTD tests - nand-gpio cleanup and portability to non-ARM - m25p80 support for 4-byte addressing chips, other new chips - pxa3xx cleanup and support for new platforms - remove obsolete alauda, octagon-5066 drivers - erase/write support for bcm47xxsflash - improve detection of ECC requirements for NAND, controller setup - NFC acceleration support for atmel-nand, read/write via SRAM - etc * tag 'for-linus-20130909' of git://git.infradead.org/linux-mtd: (184 commits) mtd: chips: Add support for PMC SPI Flash chips in m25p80.c mtd: ofpart: use for_each_child_of_node() macro mtd: mtdswap: replace strict_strtoul() with kstrtoul() mtd cs553x_nand: use kzalloc() instead of memset mtd: atmel_nand: fix error return code in atmel_nand_probe() mtd: bcm47xxsflash: writing support mtd: bcm47xxsflash: implement erasing support mtd: bcm47xxsflash: convert to module_platform_driver instead of init/exit mtd: bcm47xxsflash: convert kzalloc to avoid invalid access mtd: remove alauda driver mtd: nand: mxc_nand: mark 'const' properly mtd: maps: cfi_flagadm: add missing __iomem annotation mtd: spear_smi: add missing __iomem annotation mtd: r852: Staticize local symbols mtd: nandsim: Staticize local symbols mtd: impa7: add missing __iomem annotation mtd: sm_ftl: Staticize local symbols mtd: m25p80: add support for mr25h10 mtd: m25p80: make CONFIG_M25PXX_USE_FAST_READ safe to enable mtd: m25p80: Pass flags through CAT25_INFO macro ...
2013-08-31mtd cs553x_nand: use kzalloc() instead of memsetDan Carpenter1-5/+1
It's cleaner to use kzalloc() instead of zeroing out in a separate call to memset(). Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2013-08-31mtd: atmel_nand: fix error return code in atmel_nand_probe()Wei Yongjun1-0/+1
Fix to return a negative error code from the error handling case instead of 0, as done elsewhere in this function. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Acked-by: Josh Wu <josh.wu@atmel.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2013-08-31mtd: remove alauda driverJussi Kivilinna3-731/+0
The driver has very low utility. Devices in question are limited to about 400kB/s and the only known user (me) discarded the hardware several years back. Signed-off-by: Joern Engel <joern@logfs.org> Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2013-08-31mtd: nand: mxc_nand: mark 'const' properlyJingoo Han1-1/+1
The values pointed by the pointer are used as read-only. Also, mtd_device_parse_register() uses 'part_probes[]' as the second argument which is defined as 'const char * const *types'. Thus, the 'const' should be moved to be after the '*'. drivers/mtd/nand/mxc_nand.c:269:25: warning: duplicate const Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2013-08-31mtd: r852: Staticize local symbolsJingoo Han1-22/+22
These local symbols are used only in this file. Fix the following sparse warnings: drivers/mtd/nand/r852.c:232:6: warning: symbol 'r852_write_buf' was not declared. Should it be static? drivers/mtd/nand/r852.c:264:6: warning: symbol 'r852_read_buf' was not declared. Should it be static? drivers/mtd/nand/r852.c:315:6: warning: symbol 'r852_cmdctl' was not declared. Should it be static? drivers/mtd/nand/r852.c:360:5: warning: symbol 'r852_wait' was not declared. Should it be static? drivers/mtd/nand/r852.c:389:5: warning: symbol 'r852_ready' was not declared. Should it be static? drivers/mtd/nand/r852.c:400:6: warning: symbol 'r852_ecc_hwctl' was not declared. Should it be static? drivers/mtd/nand/r852.c:432:5: warning: symbol 'r852_ecc_calculate' was not declared. Should it be static? drivers/mtd/nand/r852.c:464:5: warning: symbol 'r852_ecc_correct' was not declared. Should it be static? drivers/mtd/nand/r852.c:532:6: warning: symbol 'r852_engine_enable' was not declared. Should it be static? drivers/mtd/nand/r852.c:550:6: warning: symbol 'r852_engine_disable' was not declared. Should it be static? drivers/mtd/nand/r852.c:560:6: warning: symbol 'r852_card_update_present' was not declared. Should it be static? drivers/mtd/nand/r852.c:575:6: warning: symbol 'r852_update_card_detect' was not declared. Should it be static? drivers/mtd/nand/r852.c:589:9: warning: symbol 'r852_media_type_show' was not declared. Should it be static? drivers/mtd/nand/r852.c:600:1: warning: symbol 'dev_attr_media_type' was not declared. Should it be static? drivers/mtd/nand/r852.c:604:6: warning: symbol 'r852_update_media_status' was not declared. Should it be static? drivers/mtd/nand/r852.c:633:5: warning: symbol 'r852_register_nand_device' was not declared. Should it be static? drivers/mtd/nand/r852.c:671:6: warning: symbol 'r852_unregister_nand_device' was not declared. Should it be static? drivers/mtd/nand/r852.c:685:6: warning: symbol 'r852_card_detect_work' was not declared. Should it be static? drivers/mtd/nand/r852.c:824:6: warning: symbol 'r852_probe' was not declared. Should it be static? drivers/mtd/nand/r852.c:964:6: warning: symbol 'r852_remove' was not declared. Should it be static? drivers/mtd/nand/r852.c:995:6: warning: symbol 'r852_shutdown' was not declared. Should it be static? Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2013-08-31mtd: nandsim: Staticize local symbolsJingoo Han1-2/+2
These local symbols are used only in this file. Fix the following sparse warnings: drivers/mtd/nand/nandsim.c:1436:5: warning: symbol 'do_read_error' was not declared. Should it be static? drivers/mtd/nand/nandsim.c:1448:6: warning: symbol 'do_bit_flips' was not declared. Should it be static? Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2013-08-31mtd: MTD_NAND_DENALI should depend on HAS_DMAGeert Uytterhoeven1-0/+1
If NO_DMA=y: drivers/built-in.o: In function `denali_remove': drivers/mtd/nand/denali.c:1605: undefined reference to `dma_unmap_single' drivers/built-in.o: In function `denali_read_page_raw': drivers/mtd/nand/denali.c:1190: undefined reference to `dma_sync_single_for_cpu' drivers/built-in.o: In function `denali_read_page': drivers/mtd/nand/denali.c:1140: undefined reference to `dma_sync_single_for_cpu' drivers/built-in.o: In function `write_page': drivers/mtd/nand/denali.c:1051: undefined reference to `dma_sync_single_for_cpu' drivers/built-in.o: In function `denali_init': drivers/mtd/nand/denali.c:1433: undefined reference to `dma_set_mask' drivers/mtd/nand/denali.c:1438: undefined reference to `dma_map_single' drivers/mtd/nand/denali.c:1442: undefined reference to `dma_mapping_error' Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2013-08-31mtd: fsmc_nand: simplify platform_get_resource_byname/devm_ioremap_resourceJulia Lawall1-12/+0
Remove unneeded error handling on the result of a call to platform_get_resource_byname when the value is passed to devm_ioremap_resource. A simplified version of the semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression pdev,res,e,e1; expression ret != 0; identifier l; @@ res = platform_get_resource_byname(...); - if (res == NULL) { ... \(goto l;\|return ret;\) } e = devm_ioremap_resource(e1, res); // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2013-08-31mtd: atmel_nand: pmecc: fix failure to correct bit error in 1024-bytes sectorJosh Wu1-1/+2
The PMECC use BCH algorithm to correct error. In BCH algorithm, the primitive polynomial value is GF(2^13) for 512-bytes sector size. And it is GF(2^14) for 1024-bytes sector size. This patch will choose correct degree of the remainders (13 or 14) for different sector size. Tested in AT91SAM9X5-EK with MLC nand flash. More detail can be found in §5.4.1 of: AT91SAM ARM-based Embedded MPU Application Note <http://www.atmel.com/Images/doc11127.pdf> Signed-off-by: Josh Wu <josh.wu@atmel.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2013-08-31mtd: nand: fixup kerneldoc, rename parameterBrian Norris1-5/+6
First, the function argument is 'offset' not 'column'. Second, the 'data_buf' name is inconsistent with the rest of this file. Just use 'buf'. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Cc: Gupta, Pekon <pekon@ti.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2013-08-31mtd: gpmi: remove the nand_scan()Huang Shijie1-30/+35
In order to make the nand_scan() work, the current code uses the hack code to init the @nand_chip->ecc.size and the @nand_chip->ecc.strength. and re-init some the ECC info in the gpmi_pre_bbt_scan(). This code is really a little ugly. The patch does following changes: (1) Use the nand_scan_ident()/nand_scan_tail() to replace the nand_scan(). (2) Init all the necessary values in the gpmi_init_last() before we call the nand_scan_tail(). (3) remove the code setting the ECC info, let the mtd layer to do the real job. (4) remove the gpmi_scan_bbt(). we do not need this function any more. Signed-off-by: Huang Shijie <b32955@freescale.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2013-08-31mtd: set ONFI nand's default hooks in nand_set_defaults()Huang Shijie1-6/+6
We may do some ONFI get/set features operations before we call the nand_scan_tail(). So move the default ONFI nand hooks into nand_set_defaults(). Signed-off-by: Huang Shijie <b32955@freescale.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2013-08-31mtd: set the ecc step size for master/slave mtd_infoHuang Shijie1-0/+1
Set the ecc step size for master/slave mtd_info{}. Signed-off-by: Huang Shijie <b32955@freescale.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2013-08-31mtd: nand: silence some shift wrap warningsDan Carpenter1-4/+4
There are static checkers which complain when we declare variables as 64 bit bitfields but only use the lower 32 bits because of shift wrapping. In this case "len" is declared as u64 as opposed to unsigned long or something which might be 32 bits. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2013-08-31mtd: simplify use of devm_ioremap_resourceJulia Lawall1-3/+1
Remove unneeded error handling on the result of a call to platform_get_resource when the value is passed to devm_ioremap_resource. Move the call to platform_get_resource adjacent to the call to devm_ioremap_resource to make the connection between them more clear. A simplified version of the semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression pdev,res,n,e,e1; expression ret != 0; identifier l; @@ - res = platform_get_resource(pdev, IORESOURCE_MEM, n); ... when != res - if (res == NULL) { ... \(goto l;\|return ret;\) } ... when != res + res = platform_get_resource(pdev, IORESOURCE_MEM, n); e = devm_ioremap_resource(e1, res); // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2013-08-31mtd: nand: Allow to build pxa3xx_nand on Orion platformsEzequiel Garcia1-1/+1
The Armada 370 and Armada XP SoC families, selected by PLAT_ORION, have a Nand Flash Controller (NFC) IP very similar to the one present in PXA platforms. Therefore, we want to build this driver on PLAT_ORION. Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Tested-by: Daniel Mack <zonque@gmail.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2013-08-31mtd: nand: pxa3xx: Allow devices with no dma resourcesEzequiel Garcia1-23/+28
When use_dma=0 there's no point in requesting resources for dma, since they won't be used anyway. Therefore we remove that requirement, therefore allowing devices without dma to pass the driver probe. Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Tested-by: Daniel Mack <zonque@gmail.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2013-08-31mtd: nand: pxa3xx: Add __maybe_unused keyword to enable_int()Ezequiel Garcia1-1/+2
Now that we have added ARCH_HAS_DMA conditional the function enable_int() may be unused. Declare it as __maybe_unused, in order to remove the following warning, when the function is not used: drivers/mtd/nand//pxa3xx_nand.c:343:24: warning: 'enable_int' defined but not used [-Wunused-function] Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Tested-by: Daniel Mack <zonque@gmail.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2013-08-31mtd: nand: pxa3xx: Make dma code dependent on dma capable platformsEzequiel Garcia1-0/+34
This patch adds a macro ARCH_HAS_DMA to compile-out arch specific dma code, namely pxa_request_dma() and pxa_free_dma(). These symbols are available only in pxa, which makes impossible to build the driver in other platforms than ARCH_PXA. In order to handle non-dma capable platforms, we implement a fallbacks that allocate buffers as if 'use_dma=false', putting the dma related code under the ARCH_HAS_DMA conditional. Please note that the correct way to handle this is to migrate the dma code to use of the mmp_pdma dmaengine driver. However, currently this is not possible because the two dmaengine drivers can't work together. Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Tested-by: Daniel Mack <zonque@gmail.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2013-08-31mtd: nand: pxa3xx: Move cached registers to info structureEzequiel Garcia1-19/+17
This registers are not per-chip (aka host) but controller-wide, so it's better to store them in the global 'info' structure. Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com> Tested-by: Daniel Mack <zonque@gmail.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-28 06:22:24 +0300