summaryrefslogtreecommitdiff
path: root/drivers/mtd/nand/raw
AgeCommit message (Collapse)AuthorFilesLines
2019-08-29mtd: rawnand: brcmnand: Fix ecc chunk calculation for erased page bitfipsClaire Lin1-1/+4
In brcmstb_nand_verify_erased_page(), the ECC chunk pointer calculation while correcting erased page bitflips is wrong, fix it. Fixes: 02b88eea9f9c ("mtd: brcmnand: Add check for erased page bitflips") Signed-off-by: Claire Lin <claire.lin@broadcom.com> Reviewed-by: Ray Jui <ray.jui@broadcom.com> Signed-off-by: Kamal Dasu <kdasu.kdev@gmail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-08-26mtd: rawnand: remove w90x900 driverArnd Bergmann3-313/+0
The ARM w90x900 platform is getting removed, so this driver is obsolete. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-08-26mtd: rawnand: Add Macronix raw NAND controller driverMason Yang3-0/+589
Add a driver for Macronix raw NAND controller. Signed-off-by: Mason Yang <masonccyang@mxic.com.tw> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-08-24mtd: rawnand: Fix a memory leak bugWenwen Wang1-4/+6
In nand_scan_bbt(), a temporary buffer 'buf' is allocated through vmalloc(). However, if check_create() fails, 'buf' is not deallocated, leading to a memory leak bug. To fix this issue, free 'buf' before returning the error. Signed-off-by: Wenwen Wang <wenwen@cs.uga.edu> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-08-07mtd: rawnand: remove redundant assignment to variable retColin Ian King1-1/+1
Variable ret is being initialized with a value that is never read and ret is being re-assigned a little later on. The assignment is redundant and hence can be removed. Addresses-Coverity: ("Unused value") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-08-07mtd: rawnand: r852: Use dev_get_drvdataChuhong Yuan1-2/+2
Instead of using to_pci_dev + pci_get_drvdata, use dev_get_drvdata to make code simpler. Signed-off-by: Chuhong Yuan <hslester96@gmail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-08-07mtd: rawnand: ingenic: fix devm_platform_ioremap_resource.cocci warningsJulia Lawall1-3/+1
drivers/mtd/nand/raw/ingenic/ingenic_nand_drv.c:330:1-9: WARNING: Use devm_platform_ioremap_resource for cs -> base Use devm_platform_ioremap_resource helper which wraps platform_get_resource() and devm_ioremap_resource() together. Generated by: scripts/coccinelle/api/devm_platform_ioremap_resource.cocci Fixes: c403ec33b613 ("mtd: rawnand: ingenic: Fix ingenic_ecc dependency") CC: Paul Cercueil <paul@crapouillou.net> Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-08-03mtd: rawnand: micron: handle on-die "ECC-off" devices correctlyMarco Felsch1-3/+11
Some devices are not supposed to support on-die ECC but experience shows that internal ECC machinery can actually be enabled through the "SET FEATURE (EFh)" command, even if a read of the "READ ID Parameter Tables" returns that it is not. Currently, the driver checks the "READ ID Parameter" field directly after having enabled the feature. If the check fails it returns immediately but leaves the ECC on. When using buggy chips like MT29F2G08ABAGA and MT29F2G08ABBGA, all future read/program cycles will go through the on-die ECC, confusing the host controller which is supposed to be the one handling correction. To address this in a common way we need to turn off the on-die ECC directly after reading the "READ ID Parameter" and before checking the "ECC status". Cc: stable@vger.kernel.org Fixes: dbc44edbf833 ("mtd: rawnand: micron: Fix on-die ECC detection logic") Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-07-30mtd: rawnand: Drop obsolete JZ4740 NAND driverPaul Cercueil3-544/+0
It has been replaced with the newer Ingenic NAND driver. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Tested-by: Artur Rojek <contact@artur-rojek.eu> Acked-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Paul Burton <paul.burton@mips.com>
2019-07-25mtd: rawnand: ingenic: Add of_node_put() before returnNishka Dasgupta1-0/+1
Each iteration of for_each_child_of_node puts the previous node, but in the case of a return from the middle of the loop, there is no put, thus causing a memory leak. Hence add an of_node_put before the return. Issue found with Coccinelle. Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-07-25mtd: rawnand: meson: Add of_node_put() before returnNishka Dasgupta1-0/+1
Each iteration of for_each_child_of_node puts the previous node, but in the case of a return from the middle of the loop, there is no put, thus causing a memory leak. Hence add an of_node_put before the return. Issue found with Coccinelle. Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com> Acked-by: Liang Yang <liang.yang@amlogic.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-07-25mtd: rawnand: tango: Add of_node_put() before returnNishka Dasgupta1-0/+1
Each iteration of for_each_child_of_node puts the previous node, but in the case of a return from the middle of the loop, there is no put, thus causing a memory leak. Hence add an of_node_put before the return. Issue found with Coccinelle. Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com> Acked-by: Mans Rullgard <mans@mansr.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-07-25mtd: rawnand: oxnas: Add of_node_put()Nishka Dasgupta1-3/+5
Each iteration of for_each_child_of_node puts the previous node, but in the case of a goto from the middle of the loop, there is no put, thus causing a memory leak. Hence add an of_node_put under a new goto to put the node at a loop exit. Issue found with Coccinelle. Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-07-25mtd: rawnand: vf610: Add of_node_put() before gotoNishka Dasgupta1-0/+1
Each iteration of for_each_available_child_of_node puts the previous node, but in the case of a goto from the middle of the loop, there is no put, thus causing a memory leak. Hence add an of_node_put before the goto. Issue found with Coccinelle. Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com> Reviewed-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-07-25mtd: rawnand: stm32_fmc2: avoid warnings when building with W=1 optionChristophe Kerello1-61/+29
This patch solves warnings detected by setting W=1 when building. Warnings type detected: drivers/mtd/nand/raw/stm32_fmc2_nand.c: In function ‘stm32_fmc2_calc_timings’: drivers/mtd/nand/raw/stm32_fmc2_nand.c:1417:23: warning: comparison is always false due to limited range of data type [-Wtype-limits] else if (tims->twait > FMC2_PMEM_PATT_TIMING_MASK) Signed-off-by: Christophe Kerello <christophe.kerello@st.com> Cc: stable@vger.kernel.org Fixes: 2cd457f328c1 ("mtd: rawnand: stm32_fmc2: add STM32 FMC2 NAND flash controller driver") Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-07-15docs: mtd: move it to the driver-api bookMauro Carvalho Chehab1-1/+1
While I was tempted to move it to admin-guide, as some docs there are more userspace-faced, there are some very technical discussions about memory error correction code from the Kernel implementer's PoV. So, let's place it inside the driver-api book. Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-07-15docs: mtd: convert to ReSTMauro Carvalho Chehab1-1/+1
Rename the mtd documentation files to ReST, add an index for them and adjust in order to produce a nice html output via the Sphinx build system. It should be noticed that Sphinx doesn't handle very well URLs with dots in the middle. Thankfully, internally, the '.' char is translated to %2E, so we can jus use %2E instead of dots, and this will work fine on both text and processed files. At its new index.rst, let's add a :orphan: while this is not linked to the main index.rst file, in order to avoid build warnings. Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
2019-07-14Merge tag 'mtd/for-5.3' of ↵Linus Torvalds13-1650/+1583
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux Pull MTD updates from Miquel Raynal: "This contains the following changes for MTD: MTD core changes: - New Hyperbus framework - New _is_locked (concat) implementation - Various cleanups NAND core changes: - use longest matching pattern in ->exec_op() default parser - export NAND operation tracer - add flag to indicate panic_write in MTD - use kzalloc() instead of kmalloc() and memset() Raw NAND controller drivers changes: - brcmnand: - fix BCH ECC layout for large page NAND parts - fallback to detected ecc-strength, ecc-step-size - when oops in progress use pio and interrupt polling - code refactor code to introduce helper functions - add support for v7.3 controller - FSMC: - use nand_op_trace for operation tracing - GPMI: - move all driver code into single file - various cleanups (including dmaengine changes) - use runtime PM to manage clocks - implement exec_op - MTK: - correct low level time calculation of r/w cycle - improve data sampling timing for read cycle - add validity check for CE# pin setting - fix wrongly assigned OOB buffer pointer issue - re-license MTK NAND driver as Dual MIT/GPL - STM32: - manage the get_irq error case - increase DMA completion timeouts Raw NAND chips drivers changes: - Macronix: add read-retry support Onenand driver changes: - add support for 8Gb datasize chips - avoid fall-through warnings SPI-NAND changes: - define macros for page-read ops with three-byte addresses - add support for two-byte device IDs and then for GigaDevice GD5F1GQ4UFxxG - add initial support for Paragon PN26G0xA - handle the case where the last page read has bitflips SPI-NOR core changes: - add support for the mt25ql02g and w25q16jv flashes - print error in case of jedec read id fails - is25lp256: add post BFPT fix to correct the addr_width SPI NOR controller drivers changes: - intel-spi: Add support for Intel Elkhart Lake SPI serial flash - smt32: remove the driver as the driver was replaced by spi-stm32-qspi.c - cadence-quadspi: add reset control" * tag 'mtd/for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (60 commits) mtd: concat: implement _is_locked mtd operation mtd: concat: refactor concat_lock/concat_unlock mtd: abi: do not use C++ style comments in uapi header mtd: afs: remove unneeded NULL check mtd: rawnand: stm32_fmc2: increase DMA completion timeouts mtd: rawnand: Use kzalloc() instead of kmalloc() and memset() mtd: hyperbus: Add driver for TI's HyperBus memory controller mtd: spinand: read returns badly if the last page has bitflips mtd: spinand: Add initial support for Paragon PN26G0xA mtd: rawnand: mtk: Re-license MTK NAND driver as Dual MIT/GPL mtd: rawnand: gpmi: remove double assignment to block_size dt-bindings: mtd: brcmnand: Add brcmnand, brcmnand-v7.3 support mtd: rawnand: brcmnand: Add support for v7.3 controller mtd: rawnand: brcmnand: Refactored code to introduce helper functions mtd: rawnand: brcmnand: When oops in progress use pio and interrupt polling mtd: Add flag to indicate panic_write mtd: rawnand: Add Macronix NAND read retry support mtd: onenand: Avoid fall-through warnings mtd: spinand: Add support for GigaDevice GD5F1GQ4UFxxG mtd: spinand: Add support for two-byte device IDs ...
2019-07-05mtd: rawnand: sunxi: Add A23/A33 DMA support with extra MBUS configurationMiquel Raynal1-0/+24
Allwinner NAND controllers can make use of DMA to enhance the I/O throughput thanks to ECC pipelining. DMA handling with A23/A33 NAND IP is a bit different than with the older SoCs, hence the introduction of a new compatible to handle: * the differences between register offsets, * the burst length change from 4 to minimum 8, * manage SRAM accesses through MBUS with extra configuration. Fixes: c49836f05aa1 ("mtd: rawnand: sunxi: Add A23/A33 DMA support") Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-07-05Revert "mtd: rawnand: sunxi: Add A23/A33 DMA support"Miquel Raynal1-36/+2
This reverts commit c49836f05aa15282f7280e06ede3f6f8a6324833. The commit is wrong and its approach actually does not work. Let's revert it in order to add the feature with a clean patch. Fixes: c49836f05aa1 ("mtd: rawnand: sunxi: Add A23/A33 DMA support") Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-07-01mtd: rawnand: ingenic: Fix ingenic_ecc dependencyPaul Cercueil4-11/+4
If MTD_NAND_JZ4780 is y and MTD_NAND_JZ4780_BCH is m, which select CONFIG_MTD_NAND_INGENIC_ECC to m, building fails: drivers/mtd/nand/raw/ingenic/ingenic_nand.o: In function `ingenic_nand_remove': ingenic_nand.c:(.text+0x177): undefined reference to `ingenic_ecc_release' drivers/mtd/nand/raw/ingenic/ingenic_nand.o: In function `ingenic_nand_ecc_correct': ingenic_nand.c:(.text+0x2ee): undefined reference to `ingenic_ecc_correct' To fix that, the ingenic_nand and ingenic_ecc modules have been fused into one single module. - The ingenic_ecc.c code is now compiled in only if $(CONFIG_MTD_NAND_INGENIC_ECC) is set. This is now a boolean instead of tristate. - To avoid changing the module name, the ingenic_nand.c file is moved to ingenic_nand_drv.c. Then the module name is still ingenic_nand. - Since ingenic_ecc.c is no more a module, the module-specific macros have been dropped, and the functions are no more exported for use by the ingenic_nand driver. Fixes: 15de8c6efd0e ("mtd: rawnand: ingenic: Separate top-level and SoC specific code") Signed-off-by: Paul Cercueil <paul@crapouillou.net> Reported-by: Arnd Bergmann <arnd@arndb.de> Reported-by: Hulk Robot <hulkci@huawei.com> Cc: YueHaibing <yuehaibing@huawei.com> Cc: stable@vger.kernel.org Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-06-28mtd: rawnand: stm32_fmc2: increase DMA completion timeoutsAmelie Delaunay1-6/+9
When the system is overloaded, DMA data transfer completion occurs after 100ms. Increase the timeouts to let it the time to complete. Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com> Signed-off-by: Christophe Kerello <christophe.kerello@st.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-06-28mtd: rawnand: Use kzalloc() instead of kmalloc() and memset()Fuqian Huang1-2/+1
Replace kmalloc() by a memset() followed with a kzalloc(). There is a recommendation to use zeroing allocator rather than allocator followed by memset(0) in ./scripts/coccinelle/api/alloc/zalloc-simple.cocci Signed-off-by: Fuqian Huang <huangfq.daxian@gmail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-06-27mtd: rawnand: mtk: Re-license MTK NAND driver as Dual MIT/GPLXiaolei Li3-7/+5
It is wanted to use MTK NAND driver with GPL-2.0 or MIT license. But now it is only licensed as GPL-2.0, so re-license it as dual MIT/GPL. Signed-off-by: Xiaolei Li <xiaolei.li@mediatek.com> Acked-by: Jorge Ramirez-Ortiz <jorge.ramirez-ortiz@linaro.org> Acked-by: Ryder Lee <ryder.lee@mediatek.com> Acked-by: Rafał Miłecki <rafal@milecki.pl> Acked-by: Miquel Raynal <miquel.raynal@bootlin.com> Acked-by: Boris Brezillon <boris.brezillon@collabora.com> Acked-by: Wen Yang <yellowriver2010@hotmail.com> Acked-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: RogerCC Lin <rogercc.lin@mediatek.com> Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-06-27mtd: rawnand: gpmi: remove double assignment to block_sizeColin Ian King1-1/+1
The variable block_size is being assigned to itself and to geo->ecc_chunk_size. Clean up the double assignment by removing the assignment to itself. Addresses-Coverity: ("Evaluation order violation") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-06-27mtd: rawnand: brcmnand: Add support for v7.3 controllerKamal Dasu1-22/+80
This change adds support for brcm NAND v7.3 controller. This controller uses a newer version of flash_dma engine and change mostly implements these differences. Signed-off-by: Kamal Dasu <kdasu.kdev@gmail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-06-27mtd: rawnand: brcmnand: Refactored code to introduce helper functionsKamal Dasu1-38/+62
Refactored NAND ECC and CMD address configuration code to use helper functions. Signed-off-by: Kamal Dasu <kdasu.kdev@gmail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-06-27mtd: rawnand: brcmnand: When oops in progress use pio and interrupt pollingKamal Dasu1-3/+45
If mtd_oops is in progress, switch to polling during NAND command completion instead of relying on DMA/interrupts so that the mtd_oops buffer can be completely written in the assigned NAND partition. Signed-off-by: Kamal Dasu <kdasu.kdev@gmail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-06-27mtd: rawnand: Add Macronix NAND read retry supportMason Yang1-0/+45
Add support for Macronix NAND read retry. Macronix NANDs support specific read operation for data recovery, which can be enabled with a SET_FEATURE. Driver checks byte 167 of Vendor Blocks in ONFI parameter page table to see if this high-reliability function is supported. Signed-off-by: Mason Yang <masonccyang@mxic.com.tw> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-06-27mtd: rawnand: brcmnand: fallback to detected ecc-strength, ecc-step-sizeKamal Dasu1-0/+11
This change supports nand-ecc-step-size and nand-ecc-strength fields in brcmnand DT node to be optional. see: Documentation/devicetree/bindings/mtd/brcm,brcmnand.txt If both nand-ecc-strength and nand-ecc-step-size are not specified in device tree node for NAND, raw NAND layer does detect ECC information by reading ONFI extended parameter page for parts using ONFI >= 2.1. In case of non-ONFI NAND parts there could be a nand_id table entry with ECC information. If there is valid device tree entry for nand-ecc-strength and nand-ecc-step-size fields it still shall override the detected values. Signed-off-by: Kamal Dasu <kdasu.kdev@gmail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-06-27mtd: rawnand: gpmi: Implement exec_opSascha Hauer2-690/+440
The gpmi driver performance suffers from NAND operations being split in multiple small DMA transfers. This has been forced by the NAND layer in the former days, but now with exec_op we can use the controller as intended. With this patch gpmi_nfc_exec_op becomes the main entry point to NAND operations. Here all instructions are collected and chained as separate DMA transfers. In the end whole chain is fired and waited to be finished. gpmi_nfc_exec_op only does the hardware operations, bad block marker swapping and buffer scrambling is done by the callers. It's worth noting that the nand_*_op functions always take the buffer lengths for the data that the NAND chip actually transfers. When doing BCH we have to calculate the net data size from the raw data size in some places. This patch has been tested with 2048/64 and 2048/128 byte NAND on i.MX6q. mtd_oobtest, mtd_subpagetest and mtd_speedtest run without errors. nandbiterrs, nandpagetest and nandsubpagetest userspace tests from mtdutils run without errors and UBIFS can successfully be mounted. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-06-27dmaengine: mxs: rename custom flagSascha Hauer1-6/+11
The mxs dma driver uses the flags parameter in dmaengine_prep_slave_sg() for custom flags, but still uses the dmaengine specific names of the flags. Do a little bit better and at least give the flag a custom name. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-06-27dmaengine: mxs: Add header file to be shared with gpmi nand driverSascha Hauer1-22/+14
The mxs dma driver can do PIO transfers. A pointer to the PIO words to transfer is passed in the struct scatterlist * argument of dmaengine_prep_slave_sg(). It's quite ugly and non obvious to cast u32 * to struct scatterlist * each time when calling dmaengine_prep_slave_sg(), so add a static inline wrapper function to be called by the user along with a description what is going on. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-06-27mtd: rawnand: gpmi: drop unnecessary flagSascha Hauer1-9/+5
The DMA_PREP_INTERRUPT flag is no longer needed by the mxs DMA driver, drop it. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-06-27mtd: rawnand: gpmi: use runtime PM to manage clocksSascha Hauer1-25/+44
The gpmi driver aggressively en/disables the clocks between operations which has significant performance cost. Use runtime PM to get rid of this bottleneck. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-06-27mtd: rawnand: gpmi: Drop unnecessary restoring of previous chipselectionSascha Hauer1-14/+2
The i.MX23 specific option read code is called right after nand_scan. We can rely on the NAND core having disabled the chipselect, so there's no point in restoring the original chip select after NAND operations. Drop it. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-06-27mtd: rawnand: gpmi: remove unused parametersSascha Hauer1-15/+19
gpmi_ecc_read_page_data uses the page parameter only for a debug printf, so we can drop the parameter and the debug printf. Moving the oob delivery from gpmi_ecc_read_page_data to gpmi_ecc_read_page makes the oob_required parameter unnecessary aswell. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-06-27mtd: rawnand: gpmi: read buf in nand_read_page_opSascha Hauer1-8/+18
The driver calls nand_read_page_op without a buffer passed and then calls chip->legacy.read_buf to read the buffer afterwards which is the same as passing the buffer nand_read_page_op in the first place. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-06-27mtd: rawnand: gpmi: Remove unnecessary variablesSascha Hauer2-11/+6
this->page_buffer_virt and this->payload_virt are always set to the same value, so drop the former and just use the latter. Same for this->page_buffer_virt and this->payload_virt. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-06-27mtd: rawnand: gpmi: remove unused variableSascha Hauer1-3/+0
The "private" member of struct gpmi_nand_data isn't used anywhere. Remove it. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-06-27mtd: rawnand: gpmi: move all driver code into single fileSascha Hauer4-1106/+1058
This moves the whole driver into a single C file. The filename gpmi-lib implies that it implements library functions, but in fact there are several cases where functions in gpmi-lib.c call back into functions in gpmi-nand.c. With this one has to constantly jump between those two files, so moving it into a single file improves readability, even when the file gets quite large. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-06-27mtd: rawnand: fsmc: Use nand_op_trace for operation tracingSascha Hauer1-17/+2
Replace the different operation tracing functions with a call to nand_op_trace. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-06-27mtd: rawnand: export NAND operation tracerSascha Hauer1-29/+1
The NAND core has a NAND operation tracing function, but it can only be used by drivers using the generic option parser from the NAND core. Export the tracing function as a static inline function in rawnand.h so that drivers implementing exec_op directly do not have to write their own operation tracing. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-06-27mtd: rawnand: mtk: Fix wrongly assigned OOB buffer pointer issueXiaolei Li1-11/+10
One main goal of the function mtk_nfc_update_ecc_stats is to check whether sectors are all empty. If they are empty, set these sectors's data buffer and OOB buffer as 0xff. But now, the sector OOB buffer pointer is wrongly assigned. We always do memset from sector 0. To fix this issue, pass start sector number to make OOB buffer pointer be properly assigned. Fixes: 1d6b1e464950 ("mtd: mediatek: driver for MTK Smart Device") Signed-off-by: Xiaolei Li <xiaolei.li@mediatek.com> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-06-27mtd: rawnand: mtk: Add validity check for CE# pin settingXiaolei Li1-0/+13
Currently, we only check how many CE# pins are set in device tree. But it should be necessary to check whether CE# pin setting is duplicated or if CE# pin index exceeds the maximum CE# number that controller supports. So, add validity check to avoid these invalid settings. Signed-off-by: Xiaolei Li <xiaolei.li@mediatek.com> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-06-27mtd: rawnand: mtk: Improve data sampling timing for read cycleXiaolei Li1-10/+36
Currently, we expand RE# low level time by choosing the max value between RE# pulse width and RE# access time, and sample data at the rising edge of RE#. Then, if RE# access time is bigger than RE# pulse width, the real read cycle time may be more than NAND SPEC required. This makes read performance be worse than that expected. This patch improves data sampling timing by calculating RE# low level time according to RE# pulse width. If RE# access time is bigger than RE# pulse width, then delay sampling data timing. The result of contrast test base on MT2712 evaluat board is as follow. nand: Micron MT29F16G08ADBCAH4 nand: 2048 MiB, SLC, erase size: 256 KiB, page size: 4096, OOB size: 224 NFI 2x clock rate: 124800000 HZ. Read speed without this patch: mtd_speedtest: page read speed is 14012 KiB/s mtd_speedtest: 2 page read speed is 14860 KiB/s Read speed with this patch: mtd_speedtest: page read speed is 18724 KiB/s mtd_speedtest: 2 page read speed is 18713 KiB/s Signed-off-by: Xiaolei Li <xiaolei.li@mediatek.com> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-06-27mtd: rawnand: mtk: Correct low level time calculation of r/w cycleXiaolei Li1-3/+21
At present, the flow of calculating AC timing of read/write cycle in SDR mode is that: At first, calculate high hold time which is valid for both read and write cycle using the max value between tREH_min and tWH_min. Secondly, calculate WE# pulse width using tWP_min. Thridly, calculate RE# pulse width using the bigger one between tREA_max and tRP_min. But NAND SPEC shows that Controller should also meet write/read cycle time. That is write cycle time should be more than tWC_min and read cycle should be more than tRC_min. Obviously, we do not achieve that now. This patch corrects the low level time calculation to meet minimum read/write cycle time required. After getting the high hold time, WE# low level time will be promised to meet tWP_min and tWC_min requirement, and RE# low level time will be promised to meet tREA_max, tRP_min and tRC_min requirement. Fixes: edfee3619c49 ("mtd: nand: mtk: add ->setup_data_interface() hook") Cc: stable@vger.kernel.org # v4.17+ Signed-off-by: Xiaolei Li <xiaolei.li@mediatek.com> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-06-27mtd: rawnand: brcmnand: Fix BCH ECC layout for large page NAND partsKamal Dasu1-1/+1
The way oobregion->offset is derived for large page NAND parts is wrong, fixes it. Fixes: ef5eeea6e911 ("mtd: nand: brcm: switch to mtd_ooblayout_ops") Signed-off-by: Kamal Dasu <kdasu.kdev@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-06-27mtd: rawnand: stm32_fmc2: manage the get_irq error caseFabien Dessenne1-0/+6
During probe, check the "get_irq" error value. Signed-off-by: Fabien Dessenne <fabien.dessenne@st.com> Acked-by: Christophe Kerello <christophe.kerello@st.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-06-27mtd: rawnand: use longest matching patternStefan Agner1-13/+37
Sometimes the exec_op parser does not choose the optimal pattern if multiple patterns with optional elements are available. Since the stack automatically splits operations in multiple exec_op calls, a non-optimal pattern gets broken up into multiple calls. E.g. an OOB read using the vf610 driver: nand: executing subop: nand: ->CMD [0x00] nand: ->ADDR [5 cyc: 00 08 ea 94 02] nand: ->CMD [0x30] nand: ->WAITRDY [max 200000 ms] nand: DATA_IN [64 B] nand: executing subop: nand: CMD [0x00] nand: ADDR [5 cyc: 00 08 ea 94 02] nand: CMD [0x30] nand: WAITRDY [max 200000 ms] nand: ->DATA_IN [64 B] However, the vf610 driver has a pattern which can execute the complete command in a single go... This patch makes sure that the longest matching pattern is chosen instead of the first (potentially only partial) match. With this change the vf610 reads the OOB in a single exec_op call: nand: executing subop: nand: ->CMD [0x00] nand: ->ADDR [5 cyc: 00 08 c0 1d 00] nand: ->CMD [0x30] nand: ->WAITRDY [max 200000 ms] nand: ->DATA_IN [64 B] Reported-by: Sascha Hauer <s.hauer@pengutronix.de> Suggested-by: Boris Brezillon <boris.brezillon@collabora.com> Tested-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-16 06:35:39 +0300