summaryrefslogtreecommitdiff
path: root/drivers/mtd/mtdconcat.c
AgeCommit message (Collapse)AuthorFilesLines
2020-09-11mtd: mtdconcat: map: remove redundant assignment to variable 'size'Colin Ian King1-1/+0
Variable 'size' is being assigned the value zero that will never be read. The assignment is redundant and can be removed. Addresses-Coverity: ("Unused value") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200910154451.752569-1-colin.king@canonical.com
2020-09-02mtd: mtdconcat: map through panic write handlerMatt Weber1-0/+44
Allows a mtdconcat's subdevice->_panic_write to be used for capturing a mtdoops dump. Note: The ->_panic_write is mapped through from the first chip that is part of the concat virtual device. Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com> [miquel.raynal@bootlin.com: return err, not void] Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20200602143403.13465-1-matthew.weber@rockwellcollins.com
2020-01-27mtd: concat: Fix a comment referring to an unknown symbolMiquel Raynal1-4/+1
Fix the comment describing what the mtd_concat_destroy() function does. It referrers to the concat_mtd_devs symbol which has never existed (at least not since the beginning of the Git era). Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-07-07mtd: concat: implement _is_locked mtd operationChris Packham1-0/+23
Add an implementation of the _is_locked operation for concatenated mtd devices. This doesn't handle getting the lock status of a range that spans chips, which is consistent with cfi_ppb_is_locked and cfi_intelext_is_locked which only look at the first block in the range. Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Signed-off-by: Richard Weinberger <richard@nod.at>
2019-07-07mtd: concat: refactor concat_lock/concat_unlockChris Packham1-32/+12
concat_lock() and concat_unlock() only differed in terms of the mtd_xx operation they called. Refactor them to use a common helper function and pass a boolean flag to indicate whether lock or unlock is needed. Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Signed-off-by: Richard Weinberger <richard@nod.at>
2019-05-24treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 102Thomas Gleixner1-15/+1
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not write to the free software foundation inc 51 franklin st fifth floor boston ma 02110 1301 usa extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 50 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Richard Fontana <rfontana@redhat.com> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190523091649.499889647@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-06-13treewide: kmalloc() -> kmalloc_array()Kees Cook1-2/+3
The kmalloc() function has a 2-factor argument form, kmalloc_array(). This patch replaces cases of: kmalloc(a * b, gfp) with: kmalloc_array(a * b, gfp) as well as handling cases of: kmalloc(a * b * c, gfp) with: kmalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kmalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kmalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The tools/ directory was manually excluded, since it has its own implementation of kmalloc(). The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kmalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kmalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kmalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(u8) * COUNT + COUNT , ...) | kmalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kmalloc( - sizeof(char) * COUNT + COUNT , ...) | kmalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kmalloc + kmalloc_array ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kmalloc + kmalloc_array ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kmalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kmalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kmalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kmalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kmalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kmalloc(C1 * C2 * C3, ...) | kmalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kmalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kmalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kmalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kmalloc(sizeof(THING) * C2, ...) | kmalloc(sizeof(TYPE) * C2, ...) | kmalloc(C1 * C2 * C3, ...) | kmalloc(C1 * C2, ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - (E1) * E2 + E1, E2 , ...) | - kmalloc + kmalloc_array ( - (E1) * (E2) + E1, E2 , ...) | - kmalloc + kmalloc_array ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-03-21mtd: Stop updating erase_info->state and calling mtd_erase_callback()Boris Brezillon1-1/+0
MTD users are no longer checking erase_info->state to determine if the erase operation failed or succeeded. Moreover, mtd_erase_callback() is now a NOP. We can safely get rid of all mtd_erase_callback() calls and all erase_info->state assignments. While at it, get rid of the erase_info->state field, all MTD_ERASE_XXX definitions and the mtd_erase_callback() function. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Reviewed-by: Richard Weinberger <richard@nod.at> Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com> Acked-by: Bert Kenward <bkenward@solarflare.com> --- Changes in v2: - Address a few coding style issues (reported by Miquel) - Remove comments that are no longer valid (reported by Miquel)
2018-03-15mtd: Unconditionally update ->fail_addr and ->addr in part_erase()Boris Brezillon1-1/+0
->fail_addr and ->addr can be updated no matter the result of parent->_erase(), we just need to remove the code doing the same thing in mtd_erase_callback() to avoid adjusting those fields twice. Note that this can be done because all MTD users have been converted to not pass an erase_info->callback() and are thus only taking the ->addr_fail and ->addr fields into account after part_erase() has returned. While we're at it, get rid of the erase_info->mtd field which was only needed to let mtd_erase_callback() get the partition device back. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Reviewed-by: Richard Weinberger <richard@nod.at>
2018-03-15mtd: Stop assuming mtd_erase() is asynchronousBoris Brezillon1-45/+3
None of the mtd->_erase() implementations work in an asynchronous manner, so let's simplify MTD users that call mtd_erase(). All they need to do is check the value returned by mtd_erase() and assume that != 0 means failure. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Reviewed-by: Richard Weinberger <richard@nod.at>
2017-11-13mtd: remove the get_unmapped_area methodNicolas Pitre1-27/+0
It is now unused. Signed-off-by: Nicolas Pitre <nico@linaro.org> Reviewed-by: Richard Weinberger <richard@nod.at> Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> Tested-by: Chris Brandt <chris.brandt@renesas.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2016-04-19mtd: create an mtd_ooblayout_ops struct to ease ECC layout definitionBoris Brezillon1-1/+1
ECC layout definitions are currently exposed using the nand_ecclayout struct which embeds oobfree and eccpos arrays with predefined size. This approach was acceptable when NAND chips were providing relatively small OOB regions, but MLC and TLC now provide OOB regions of several hundreds of bytes, which implies a non negligible overhead for everybody even those who only need to support legacy NANDs. Create an mtd_ooblayout_ops interface providing the same functionality (expose the ECC and oobfree layout) without the need for this huge structure. The mtd->ecclayout is now deprecated and should be replaced by the equivalent mtd_ooblayout_ops. In the meantime we provide a wrapper around the ->ecclayout field to ease migration to this new model. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
2016-04-19mtd: use mtd_set_ecclayout() where appropriateBoris Brezillon1-1/+1
Use the mtd_set_ecclayout() helper instead of directly assigning the mtd->ecclayout field. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
2015-02-18Merge tag 'for-linus-20150216' of git://git.infradead.org/linux-mtdLinus Torvalds1-1/+2
Pull MTD updates from Brian Norris: "NAND: - Add new Hisilicon NAND driver for Hip04 - Add default reboot handler, to ensure all outstanding erase transactions complete in time - jz4740: convert to use GPIO descriptor API - Atmel: add support for sama5d4 - Change default bitflip threshold to 75% of correction strength - Miscellaneous cleanups and bugfixes SPI NOR: - Freescale QuadSPI: - Fix a few probe() and remove() issues - Add a MAINTAINERS entry for this driver - Tweak transfer size to increase read performance - Add suspend/resume support - Add Micron quad I/O support - ST FSM SPI: miscellaneous fixes JFFS2: - gracefully handle corrupted 'offset' field found on flash Other: - bcm47xxpart: add tweaks for a few new devices - mtdconcat: set return lengths properly for mtd_write_oob() - map_ram: enable use with mtdoops - maps: support fallback to ROM/UBI for write-protected NOR flash" * tag 'for-linus-20150216' of git://git.infradead.org/linux-mtd: (46 commits) mtd: hisilicon: && vs & typo jffs2: fix handling of corrupted summary length mtd: hisilicon: add device tree binding documentation mtd: hisilicon: add a new NAND controller driver for hisilicon hip04 Soc mtd: avoid registering reboot notifier twice mtd: concat: set the return lengths properly mtd: kconfig: replace PPC_OF with PPC mtd: denali: remove unnecessary stubs mtd: nand: remove redundant local variable MAINTAINERS: add maintainer entry for FREESCALE QUAD SPI driver mtd: fsl-quadspi: improve read performance by increase AHB transfer size mtd: fsl-quadspi: Remove unnecessary 'map_failed' label mtd: fsl-quadspi: Remove unneeded success/error messages mtd: fsl-quadspi: Fix the error paths mtd: nand: omap: drop condition with no effect mtd: nand: jz4740: Convert to GPIO descriptor API mtd: nand: Request strength instead of bytes for soft BCH mtd: nand: default bitflip-reporting threshold to 75% of correction strength mtd: atmel_nand: introduce a new compatible string for sama5d4 chip mtd: atmel_nand: return max bitflips in all sectors in pmecc_correction() ...
2015-02-06mtd: concat: set the return lengths properlyNiklas Cassel1-1/+2
In concat_read_oob both retlen and oobretlen should be updated. concat_write_oob previously only (improperly) updated retlen. Signed-off-by: Niklas Cassel <niklass@axis.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2015-01-21fs: introduce f_op->mmap_capabilities for nommu mmap supportChristoph Hellwig1-10/+0
Since "BDI: Provide backing device capability information [try #3]" the backing_dev_info structure also provides flags for the kind of mmap operation available in a nommu environment, which is entirely unrelated to it's original purpose. Introduce a new nommu-only file operation to provide this information to the nommu mmap code instead. Splitting this from the backing_dev_info structure allows to remove lots of backing_dev_info instance that aren't otherwise needed, and entirely gets rid of the concept of providing a backing_dev_info for a character device. It also removes the need for the mtd_inodefs filesystem. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Tejun Heo <tj@kernel.org> Acked-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Jens Axboe <axboe@fb.com>
2012-03-27mtd: unify initialization of erase_info->fail_addrShmulik Ladkani1-2/+0
Initialization of 'erase_info->fail_addr' to MTD_FAIL_ADDR_UNKNOWN prior erase operation is duplicated accross several MTD drivers, and also taken care of by some MTD users as well. Harmonize it: initialize 'fail_addr' within 'mtd_erase()' interface. Signed-off-by: Shmulik Ladkani <shmulik.ladkani@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-03-27mtd: remove retlen zeroing duplicationArtem Bityutskiy1-6/+0
The MTD API function now zero the 'retlen' parameter before calling the driver's method — do not do this again in drivers. This removes duplicated '*retlen = 0' assignent from the following methods: 'mtd_point()' 'mtd_read()' 'mtd_write()' 'mtd_writev()' 'mtd_panic_write()' Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-03-27mtd: remove R/O checking duplicationArtem Bityutskiy1-24/+3
Many drivers check whether the partition is R/O and return -EROFS if yes. Let's stop having duplicated checks and move them to the API functions instead. And again a bit of noise - deleted few too sparse newlines, sorry. Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-03-27mtd: do not duplicate length and offset checks in driversArtem Bityutskiy1-26/+0
We already verify that offset and length are within the MTD device size in the MTD API functions. Let's remove the duplicated checks in drivers. This patch only affects the following API's: 'mtd_erase()' 'mtd_point()' 'mtd_unpoint()' 'mtd_get_unmapped_area()' 'mtd_read()' 'mtd_write()' 'mtd_panic_write()' 'mtd_lock()' 'mtd_unlock()' 'mtd_is_locked()' 'mtd_block_isbad()' 'mtd_block_markbad()' This patch adds a bit of noise by removing too sparse empty lines, but this is not too bad. Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-03-27mtd: mtdconcat: return -EOPNOTSUPP if block_markbad is undefinedArtem Bityutskiy1-3/+0
The main 'mtd_block_markbad()' function returns -EOPNOTSUPP if the '->block_markbad' method is undefined, and mtdconcat should do the same. Fix this by simply removing the 'mtd_can_have_bb()' because it is not really necessary. It could be treated as an optimization, but this function is expected to be used so rarely that it does not matter. Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-03-27mtd: add leading underscore to all mtd functionsArtem Bityutskiy1-21/+21
This patch renames all MTD functions by adding a "_" prefix: mtd->erase -> mtd->_erase mtd->read_oob -> mtd->_read_oob ... The reason is that we are re-working the MTD API and from now on it is an error to use MTD function pointers directly - we have a corresponding API call for every pointer. By adding a leading "_" we achieve the following: 1. Make sure we convert every direct pointer users 2. A leading "_" suggests that this interface is internal and it becomes less likely that people will use them directly 3. Make sure all the out-of-tree modules stop compiling and the owners spot the big API change and amend them. Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-01-09mtd: do not use mtd->block_markbad directlyArtem Bityutskiy1-1/+1
Instead, use the new 'mtd_can_have_bb()', or just rely on 'mtd_block_markbad()' return code, which will be -EOPNOTSUPP if bad blocks are not supported. Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-01-09mtd: introduce mtd_can_have_bb helperArtem Bityutskiy1-1/+1
This patch introduces new 'mtd_can_have_bb()' helper function which checks whether the flash can have bad eraseblocks. Then it changes all the direct 'mtd->block_isbad' use cases with 'mtd_can_have_bb()'. Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-01-09mtd: do not use mtd->lock, unlock and is_locked directlyArtem Bityutskiy1-12/+6
Instead, call the corresponding MTD API function which will return '-EOPNOTSUPP' if the operation is not supported. Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-01-09mtd: do not use mtd->get_unmapped_area directlyArtem Bityutskiy1-5/+1
Remove direct usage of mtd->get_unmapped_area. Instead, just call 'mtd_get_unmapped_area()' which will return -EOPNOTSUPP if the function is not implemented and test for this error code. Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-01-09mtd: introduce mtd_block_markbad interfaceArtem Bityutskiy1-1/+1
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-01-09mtd: introduce mtd_block_isbad interfaceArtem Bityutskiy1-1/+1
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-01-09mtd: introduce mtd_resume interfaceArtem Bityutskiy1-1/+1
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-01-09mtd: introduce mtd_suspend interfaceArtem Bityutskiy1-1/+1
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-01-09mtd: introduce mtd_unlock interfaceArtem Bityutskiy1-1/+1
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-01-09mtd: introduce mtd_lock interfaceArtem Bityutskiy1-1/+1
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-01-09mtd: introduce mtd_sync interfaceArtem Bityutskiy1-1/+1
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-01-09mtd: introduce mtd_writev interfaceArtem Bityutskiy1-2/+3
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-01-09mtd: introduce mtd_write_oob interfaceArtem Bityutskiy1-1/+1
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-01-09mtd: introduce mtd_read_oob interfaceArtem Bityutskiy1-1/+1
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-01-09mtd: introduce mtd_write interfaceArtem Bityutskiy1-1/+1
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-01-09mtd: introduce mtd_read interfaceArtem Bityutskiy1-1/+1
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-01-09mtd: introduce mtd_get_unmapped_area interfaceArtem Bityutskiy1-2/+2
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-01-09mtd: introduce mtd_erase interfaceArtem Bityutskiy1-1/+1
This patch is part of a patch-set which changes the MTD interface from 'mtd->func()' form to 'mtd_func()' form. We need this because we want to add common code to to all drivers in the mtd core level, which is impossible with the current interface when MTD clients call driver functions like 'read()' or 'write()' directly. At this point we just introduce a new inline wrapper function, but later some of them are expected to gain more code. E.g., the input parameters check should be moved to the wrappers rather than be duplicated at many drivers. This particular patch introduced the 'mtd_erase()' interface. The following patches add all the other interfaces one by one. Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2011-09-21mtd: utilize `mtd_is_*()' functionsBrian Norris1-4/+4
Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@intel.com>
2011-09-11mtd: spelling fixesBrian Norris1-1/+1
Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@intel.com>
2011-05-25mtd: mtdconcat: fix NAND OOB writeFelix Radensky1-2/+2
Currently mtdconcat is broken for NAND. An attemtpt to create JFFS2 filesystem on concatenation of several NAND devices fails with OOB write errors. This patch fixes that problem. Signed-off-by: Felix Radensky <felix@embedded-sol.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Cc: stable@kernel.org Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2011-03-11mtd: adapt writebufsize calculation for concatHolger Brunck1-1/+7
If different chips with different writebufsize are concatenated, the writebufsize from the concat device has to be taken from the device with the largest writebuffer. This writebufsize is used later on in the UBI layer for the min I/O size. Signed-off-by: Holger Brunck <holger.brunck@keymile.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2011-01-06mtd: initialize writebufsize in the MTD object of a partitionAnatolij Gustschin1-0/+1
Propagate the writebufsize to the partition's MTD object so that UBI can set correct value for it's minimal I/O size using the writebufsize field of MTD object of the partition. By previous patches we added proper writebufsize field initialization. Next patch can now change UBI to use this field for setting the minimal I/O size. Signed-off-by: Anatolij Gustschin <agust@denx.de> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-08-08mtd: Update copyright noticesDavid Woodhouse1-2/+16
Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2010-08-02mtd: mtdconcat: fix bug with uninitialized lock and unlock functionsMartin Krause1-8/+12
Test if a lock or unlock function is present (pointer not NULL) before calling it, to prevent a kernel dump. Artem: removed extra blank lines Signed-off-by: Martin Krause <martin.krause@tqs.de> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-05-16drivers/mtd: Use kmemdupJulia Lawall1-2/+1
Use kmemdup when some other buffer is immediately copied into the allocated region. A simplified version of the semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression from,to,size,flag; statement S; @@ - to = \(kmalloc\|kzalloc\)(size,flag); + to = kmemdup(from,size,flag); if (to==NULL || ...) S - memcpy(to, from, size); // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-09-19mtd: mtdconcat: prevent a read from eraseregions[-1]Roel Kluin1-3/+3
If the erase region was found in the first iteration we read from eraseregions[-1] Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-03-24NOMMU: Add support for direct mapping through mtdconcat if possibleDavid Howells1-0/+47
Add support for direct mapping through mtdconcat, if possible, by attaching the samebacking_dev_info structure to the master. It has some restrictions: (1) It won't permit direct mapping of concatenated devices that have differing BDIs. (2) It doesn't support maps that span the 'gap' between devices, although it possibly could if the devices spanned across return compatible (ie. contiguous) addresses from their get_unmapped_area() ops. Signed-off-by: Gavin Lambert <gavinl@compacsort.com> Signed-off-by: David Howells <dhowells@redhat.com> Tested-by: Bernd Schmidt <bernd.schmidt@analog.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-27 23:03:56 +0300