summaryrefslogtreecommitdiff
path: root/drivers/mtd/devices
AgeCommit message (Collapse)AuthorFilesLines
2016-12-24Replace <asm/uaccess.h> with <linux/uaccess.h> globallyLinus Torvalds2-2/+2
This was entirely automated, using the script by Al: PATT='^[[:blank:]]*#[[:blank:]]*include[[:blank:]]*<asm/uaccess.h>' sed -i -e "s!$PATT!#include <linux/uaccess.h>!" \ $(git grep -l "$PATT"|grep -v ^include/linux/uaccess.h) to do the replacement at the end of the merge window. Requested-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-11-08mtd: bcm47xxsflash: use uncached MMIO access for BCM53573Rafał Miłecki1-5/+19
BCM53573 is a new series of Broadcom's SoCs. It's based on ARM and uses this old ChipCommon-based flash access. Early tests resulted in flash corruptions that were tracked down to using cached MMIO for flash read access. Switch to ioremap_nocache conditionally to support BCM53573 and don't break performance on old MIPS devices. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2016-08-03Merge tag 'for-linus-20160801' of git://git.infradead.org/linux-mtdLinus Torvalds2-27/+26
Pull MTD updates from Brian Norris: "NAND: Quoting Boris: 'This pull request contains only one notable change: - Addition of the MTK NAND controller driver And a bunch of specific NAND driver improvements/fixes. Here are the changes that are worth mentioning: - A few fixes/improvements for the xway NAND controller driver - A few fixes for the sunxi NAND controller driver - Support for DMA in the sunxi NAND driver - Support for the sunxi NAND controller IP embedded in A23/A33 SoCs - Addition for bitflips detection in erased pages to the brcmnand driver - Support for new brcmnand IPs - Update of the OMAP-GPMC binding to support DMA channel description' In addition, some small fixes around error handling, etc., as well as one long-standing corner case issue (2.6.20, I think?) with writing 1 byte less than a page. NOR: - rework some error handling on reads and writes, so we can better handle (for instance) SPI controllers which have limitations on their maximum transfer size - add new Cadence Quad SPI flash controller driver - add new Atmel QSPI flash controller driver - add new Hisilicon SPI flash controller driver - support a few new flash, and update supported features on others - fix the logic used for detecting a fully-unlocked flash And other miscellaneous small fixes" * tag 'for-linus-20160801' of git://git.infradead.org/linux-mtd: (60 commits) mtd: spi-nor: don't build Cadence QuadSPI on non-ARM mtd: mtk-nor: remove duplicated include from mtk-quadspi.c mtd: nand: fix bug writing 1 byte less than page size mtd: update description of MTD_BCM47XXSFLASH symbol mtd: spi-nor: Add driver for Cadence Quad SPI Flash Controller mtd: spi-nor: Bindings for Cadence Quad SPI Flash Controller driver mtd: nand: brcmnand: Change BUG_ON in brcmnand_send_cmd mtd: pmcmsp-flash: Allocating too much in init_msp_flash() mtd: maps: sa1100-flash: potential NULL dereference mtd: atmel-quadspi: add driver for Atmel QSPI controller mtd: nand: omap2: fix return value check in omap_nand_probe() Documentation: atmel-quadspi: add binding file for Atmel QSPI driver mtd: spi-nor: add hisilicon spi-nor flash controller driver mtd: spi-nor: support dual, quad, and WP for Gigadevice mtd: spi-nor: Added support for n25q00a. memory: Update dependency of IFC for Layerscape mtd: nand: jz4780: Update MODULE_AUTHOR email address mtd: nand: sunxi: prevent a small memory leak mtd: nand: sunxi: add reset line support mtd: nand: sunxi: update DT bindings ...
2016-07-31Merge tag 'powerpc-4.8-1' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc updates from Michael Ellerman: "Highlights: - PowerNV PCI hotplug support. - Lots more Power9 support. - eBPF JIT support on ppc64le. - Lots of cxl updates. - Boot code consolidation. Bug fixes: - Fix spin_unlock_wait() from Boqun Feng - Fix stack pointer corruption in __tm_recheckpoint() from Michael Neuling - Fix multiple bugs in memory_hotplug_max() from Bharata B Rao - mm: Ensure "special" zones are empty from Oliver O'Halloran - ftrace: Separate the heuristics for checking call sites from Michael Ellerman - modules: Never restore r2 for a mprofile-kernel style mcount() call from Michael Ellerman - Fix endianness when reading TCEs from Alexey Kardashevskiy - start rtasd before PCI probing from Greg Kurz - PCI: rpaphp: Fix slot registration for multiple slots under a PHB from Tyrel Datwyler - powerpc/mm: Add memory barrier in __hugepte_alloc() from Sukadev Bhattiprolu Cleanups & fixes: - Drop support for MPIC in pseries from Rashmica Gupta - Define and use PPC64_ELF_ABI_v2/v1 from Michael Ellerman - Remove unused symbols in asm-offsets.c from Rashmica Gupta - Fix SRIOV not building without EEH enabled from Russell Currey - Remove kretprobe_trampoline_holder from Thiago Jung Bauermann - Reduce log level of PCI I/O space warning from Benjamin Herrenschmidt - Add array bounds checking to crash_shutdown_handlers from Suraj Jitindar Singh - Avoid -maltivec when using clang integrated assembler from Anton Blanchard - Fix array overrun in ppc_rtas() syscall from Andrew Donnellan - Fix error return value in cmm_mem_going_offline() from Rasmus Villemoes - export cpu_to_core_id() from Mauricio Faria de Oliveira - Remove old symbols from defconfigs from Andrew Donnellan - Update obsolete comments in setup_32.c about entry conditions from Benjamin Herrenschmidt - Add comment explaining the purpose of setup_kdump_trampoline() from Benjamin Herrenschmidt - Merge the RELOCATABLE config entries for ppc32 and ppc64 from Kevin Hao - Remove RELOCATABLE_PPC32 from Kevin Hao - Fix .long's in tlb-radix.c to more meaningful from Balbir Singh Minor cleanups & fixes: - Andrew Donnellan, Anna-Maria Gleixner, Anton Blanchard, Benjamin Herrenschmidt, Bharata B Rao, Christophe Leroy, Colin Ian King, Geliang Tang, Greg Kurz, Madhavan Srinivasan, Michael Ellerman, Michael Ellerman, Stephen Rothwell, Stewart Smith. Freescale updates from Scott: - "Highlights include more 8xx optimizations, device tree updates, and MVME7100 support." PowerNV PCI hotplug from Gavin Shan: - PCI: Add pcibios_setup_bridge() - Override pcibios_setup_bridge() - Remove PCI_RESET_DELAY_US - Move pnv_pci_ioda_setup_opal_tce_kill() around - Increase PE# capacity - Allocate PE# in reverse order - Create PEs in pcibios_setup_bridge() - Setup PE for root bus - Extend PCI bridge resources - Make pnv_ioda_deconfigure_pe() visible - Dynamically release PE - Update bridge windows on PCI plug - Delay populating pdn - Support PCI slot ID - Use PCI slot reset infrastructure - Introduce pnv_pci_get_slot_id() - Functions to get/set PCI slot state - PCI/hotplug: PowerPC PowerNV PCI hotplug driver - Print correct PHB type names Power9 idle support from Shreyas B. Prabhu: - set power_save func after the idle states are initialized - Use PNV_THREAD_WINKLE macro while requesting for winkle - make hypervisor state restore a function - Rename idle_power7.S to idle_book3s.S - Rename reusable idle functions to hardware agnostic names - Make pnv_powersave_common more generic - abstraction for saving SPRs before entering deep idle states - Add platform support for stop instruction - cpuidle/powernv: Use CPUIDLE_STATE_MAX instead of MAX_POWERNV_IDLE_STATES - cpuidle/powernv: cleanup cpuidle-powernv.c - cpuidle/powernv: Add support for POWER ISA v3 idle states - Use deepest stop state when cpu is offlined Power9 PMU from Madhavan Srinivasan: - factor out power8 pmu macros and defines - factor out power8 pmu functions - factor out power8 __init_pmu code - Add power9 event list macros for generic and cache events - Power9 PMU support - Export Power9 generic and cache events to sysfs Power9 preliminary interrupt & PCI support from Benjamin Herrenschmidt: - Add XICS emulation APIs - Move a few exception common handlers to make room - Add support for HV virtualization interrupts - Add mechanism to force a replay of interrupts - Add ICP OPAL backend - Discover IODA3 PHBs - pci: Remove obsolete SW invalidate - opal: Add real mode call wrappers - Rename TCE invalidation calls - Remove SWINV constants and obsolete TCE code - Rework accessing the TCE invalidate register - Fallback to OPAL for TCE invalidations - Use the device-tree to get available range of M64's - Check status of a PHB before using it - pci: Don't try to allocate resources that will be reassigned Other Power9: - Send SIGBUS on unaligned copy and paste from Chris Smart - Large Decrementer support from Oliver O'Halloran - Load Monitor Register Support from Jack Miller Performance improvements from Anton Blanchard: - Avoid load hit store in __giveup_fpu() and __giveup_altivec() - Avoid load hit store in setup_sigcontext() - Remove assembly versions of strcpy, strcat, strlen and strcmp - Align hot loops of some string functions eBPF JIT from Naveen N. Rao: - Fix/enhance 32-bit Load Immediate implementation - Optimize 64-bit Immediate loads - Introduce rotate immediate instructions - A few cleanups - Isolate classic BPF JIT specifics into a separate header - Implement JIT compiler for extended BPF Operator Panel driver from Suraj Jitindar Singh: - devicetree/bindings: Add binding for operator panel on FSP machines - Add inline function to get rc from an ASYNC_COMP opal_msg - Add driver for operator panel on FSP machines Sparse fixes from Daniel Axtens: - make some things static - Introduce asm-prototypes.h - Include headers containing prototypes - Use #ifdef __BIG_ENDIAN__ #else for REG_BYTE - kvm: Clarify __user annotations - Pass endianness to sparse - Make ppc_md.{halt, restart} __noreturn MM fixes & cleanups from Aneesh Kumar K.V: - radix: Update LPCR HR bit as per ISA - use _raw variant of page table accessors - Compile out radix related functions if RADIX_MMU is disabled - Clear top 16 bits of va only on older cpus - Print formation regarding the the MMU mode - hash: Update SDR1 size encoding as documented in ISA 3.0 - radix: Update PID switch sequence - radix: Update machine call back to support new HCALL. - radix: Add LPID based tlb flush helpers - radix: Add a kernel command line to disable radix - Cleanup LPCR defines Boot code consolidation from Benjamin Herrenschmidt: - Move epapr_paravirt_early_init() to early_init_devtree() - cell: Don't use flat device-tree after boot - ge_imp3a: Don't use the flat device-tree after boot - mpc85xx_ds: Don't use the flat device-tree after boot - mpc85xx_rdb: Don't use the flat device-tree after boot - Don't test for machine type in rtas_initialize() - Don't test for machine type in smp_setup_cpu_maps() - dt: Add of_device_compatible_match() - Factor do_feature_fixup calls - Move 64-bit feature fixup earlier - Move 64-bit memory reserves to setup_arch() - Use a cachable DART - Move FW feature probing out of pseries probe() - Put exception configuration in a common place - Remove early allocation of the SMU command buffer - Move MMU backend selection out of platform code - pasemi: Remove IOBMAP allocation from platform probe() - mm/hash: Don't use machine_is() early during boot - Don't test for machine type to detect HEA special case - pmac: Remove spurrious machine type test - Move hash table ops to a separate structure - Ensure that ppc_md is empty before probing for machine type - Move 64-bit probe_machine() to later in the boot process - Move 32-bit probe() machine to later in the boot process - Get rid of ppc_md.init_early() - Move the boot time info banner to a separate function - Move setting of {i,d}cache_bsize to initialize_cache_info() - Move the content of setup_system() to setup_arch() - Move cache info inits to a separate function - Re-order the call to smp_setup_cpu_maps() - Re-order setup_panic() - Make a few boot functions __init - Merge 32-bit and 64-bit setup_arch() Other new features: - tty/hvc: Use IRQF_SHARED for OPAL hvc consoles from Sam Mendoza-Jonas - tty/hvc: Use opal irqchip interface if available from Sam Mendoza-Jonas - powerpc: Add module autoloading based on CPU features from Alastair D'Silva - crypto: vmx - Convert to CPU feature based module autoloading from Alastair D'Silva - Wake up kopald polling thread before waiting for events from Benjamin Herrenschmidt - xmon: Dump ISA 2.06 SPRs from Michael Ellerman - xmon: Dump ISA 2.07 SPRs from Michael Ellerman - Add a parameter to disable 1TB segs from Oliver O'Halloran - powerpc/boot: Add OPAL console to epapr wrappers from Oliver O'Halloran - Assign fixed PHB number based on device-tree properties from Guilherme G. Piccoli - pseries: Add pseries hotplug workqueue from John Allen - pseries: Add support for hotplug interrupt source from John Allen - pseries: Use kernel hotplug queue for PowerVM hotplug events from John Allen - pseries: Move property cloning into its own routine from Nathan Fontenot - pseries: Dynamic add entires to associativity lookup array from Nathan Fontenot - pseries: Auto-online hotplugged memory from Nathan Fontenot - pseries: Remove call to memblock_add() from Nathan Fontenot cxl: - Add set and get private data to context struct from Michael Neuling - make base more explicitly non-modular from Paul Gortmaker - Use for_each_compatible_node() macro from Wei Yongjun - Frederic Barrat - Abstract the differences between the PSL and XSL - Make vPHB device node match adapter's - Philippe Bergheaud - Add mechanism for delivering AFU driver specific events - Ignore CAPI adapters misplaced in switched slots - Refine slice error debug messages - Andrew Donnellan - static-ify variables to fix sparse warnings - PCI/hotplug: pnv_php: export symbols and move struct types needed by cxl - PCI/hotplug: pnv_php: handle OPAL_PCI_SLOT_OFFLINE power state - Add cxl_check_and_switch_mode() API to switch bi-modal cards - remove dead Kconfig options - fix potential NULL dereference in free_adapter() - Ian Munsie - Update process element after allocating interrupts - Add support for CAPP DMA mode - Fix allowing bogus AFU descriptors with 0 maximum processes - Fix allocating a minimum of 2 pages for the SPA - Fix bug where AFU disable operation had no effect - Workaround XSL bug that does not clear the RA bit after a reset - Fix NULL pointer dereference on kernel contexts with no AFU interrupts - powerpc/powernv: Split cxl code out into a separate file - Add cxl_slot_is_supported API - Enable bus mastering for devices using CAPP DMA mode - Move cxl_afu_get / cxl_afu_put to base - Allow a default context to be associated with an external pci_dev - Do not create vPHB if there are no AFU configuration records - powerpc/powernv: Add support for the cxl kernel api on the real phb - Add support for using the kernel API with a real PHB - Add kernel APIs to get & set the max irqs per context - Add preliminary workaround for CX4 interrupt limitation - Add support for interrupts on the Mellanox CX4 - Workaround PE=0 hardware limitation in Mellanox CX4 - powerpc/powernv: Fix pci-cxl.c build when CONFIG_MODULES=n selftests: - Test unaligned copy and paste from Chris Smart - Load Monitor Register Tests from Jack Miller - Cyril Bur - exec() with suspended transaction - Use signed long to read perf_event_paranoid - Fix usage message in context_switch - Fix generation of vector instructions/types in context_switch - Michael Ellerman - Use "Delta" rather than "Error" in normal output - Import Anton's mmap & futex micro benchmarks - Add a test for PROT_SAO" * tag 'powerpc-4.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (263 commits) powerpc/mm: Parenthesise IS_ENABLED() in if condition tty/hvc: Use opal irqchip interface if available tty/hvc: Use IRQF_SHARED for OPAL hvc consoles selftests/powerpc: exec() with suspended transaction powerpc: Improve comment explaining why we modify VRSAVE powerpc/mm: Drop unused externs for hpte_init_beat[_v3]() powerpc/mm: Rename hpte_init_lpar() and move the fallback to a header powerpc/mm: Fix build break when PPC_NATIVE=n crypto: vmx - Convert to CPU feature based module autoloading powerpc: Add module autoloading based on CPU features powerpc/powernv/ioda: Fix endianness when reading TCEs powerpc/mm: Add memory barrier in __hugepte_alloc() powerpc/modules: Never restore r2 for a mprofile-kernel style mcount() call powerpc/ftrace: Separate the heuristics for checking call sites powerpc: Merge 32-bit and 64-bit setup_arch() powerpc/64: Make a few boot functions __init powerpc: Re-order setup_panic() powerpc: Re-order the call to smp_setup_cpu_maps() powerpc/32: Move cache info inits to a separate function powerpc/64: Move the content of setup_system() to setup_arch() ...
2016-07-19mtd: add arch dependency for MTD_BCM47XXSFLASH symbolRafał Miłecki1-1/+1
We dropped strict MIPS dependency for bcm47xxsflash driver in: commit 5651d6aaf489 ("mtd: bcm47xxsflash: use ioremap_cache() instead of KSEG0ADDR()") but using ioremap_cache still limits building it to few selected architectures only. A recent commit 57d8f7dd2132 ("bcma: allow enabling serial flash support on non-MIPS SoCs") automatically dropped MIPS dependency for MTD_BCM47XXSFLASH which broke building e.g. on powerpc and cris. The bcma change is alright as it doesn't break building bcma code in any way. MTD_BCM47XXSFLASH on the other hand should be limited to archs which need it and can build it (by providing ioremap_cache). Fixes: 57d8f7dd2132 ("bcma: allow enabling serial flash support on non-MIPS SoCs") Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Cc: Brian Norris <computersforpeace@gmail.com> Acked-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2016-07-18mtd: update description of MTD_BCM47XXSFLASH symbolRafał Miłecki1-2/+2
For years now we support writing to BCMA SoC serial flash, so don't describe this driver as providing read-only support anymore. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2016-07-10mtd: Remove unused symbol CONFIG_MTDRAM_ABS_POSBen Hutchings1-12/+0
This has been unused, except as the condition for a fatal error, since commit c13cbf3b5086 ("[MTD] mtdram: Quick cleanup of the driver:") in 2.6.13 (!). Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Acked-by: Jesper Nilsson <jesper.nilsson@axis.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2016-06-29powerpc/opal: Add inline function to get rc from an ASYNC_COMP opal_msgSuraj Jitindar Singh1-1/+1
An opal_msg of type OPAL_MSG_ASYNC_COMP contains the return code in the params[1] struct member. However this isn't intuitive or obvious when reading the code and requires that a user look at the skiboot documentation or opal-api.h to verify this. Add an inline function to get the return code from an opal_msg and update call sites accordingly. Signed-off-by: Suraj Jitindar Singh <sjitindarsingh@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-06-02mtd: m25p80: read in spi_max_transfer_size chunksMichal Suchanek1-1/+1
Take into account transfer size limitation of SPI master. Signed-off-by: Michal Suchanek <hramrach@gmail.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com> Acked-by: Michal Suchanek <hramrach@gmail.com> Tested-by: Michal Suchanek <hramrach@gmail.com>
2016-06-02mtd: spi-nor: stop passing around retlenMichal Suchanek1-5/+2
Do not pass retlen to hardware driver read/write functions. Update it in spi-nor generic driver instead. Signed-off-by: Michal Suchanek <hramrach@gmail.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com> Tested-by Cyrille Pitchen <cyrille.pitchen@atmel.com> Acked-by: Michal Suchanek <hramrach@gmail.com> Tested-by: Michal Suchanek <hramrach@gmail.com>
2016-06-02mtd: m25p80: return amount of data transferred or error in read/writeMichal Suchanek1-8/+21
Add checking of SPI transfer errors and return them from read/write functions. Also return the amount of data transferred. Signed-off-by: Michal Suchanek <hramrach@gmail.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com> Acked-by: Michal Suchanek <hramrach@gmail.com> Tested-by: Michal Suchanek <hramrach@gmail.com>
2016-06-02mtd: spi-nor: change return value of read/writeMichal Suchanek1-2/+3
Change the return value of spi-nor device read and write methods to allow returning amount of data transferred and errors as read(2)/write(2) does. Also, start handling positive returns in spi_nor_read(), since we want to convert drivers to start returning the read-length both via *retlen and the return code. (We don't need to do the same transition process for spi_nor_write(), since ->write() didn't used to have a return code at all.) Signed-off-by: Michal Suchanek <hramrach@gmail.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com> Tested-by Cyrille Pitchen <cyrille.pitchen@atmel.com> Acked-by: Michal Suchanek <hramrach@gmail.com> Tested-by: Michal Suchanek <hramrach@gmail.com>
2016-05-24Merge tag 'for-linus-20160523' of git://git.infradead.org/linux-mtdLinus Torvalds5-18/+84
Pull MTD updates from Brian Norris: "First cycle with Boris as NAND maintainer! Many (most) bullets stolen from him. Generic: - Migrated NAND LED trigger to be a generic MTD trigger NAND: - Introduction of the "ECC algorithm" concept, to avoid overloading the ECC mode field too much more - Replaced the nand_ecclayout infrastructure with something a little more flexible (finally!) and future proof - Rework of the OMAP GPMC and NAND drivers; the TI folks pulled some of this into their own tree as well - Prepare the sunxi NAND driver to receive DMA support - Handle bitflips in erased pages on GPMI revisions that do not support this in hardware. SPI NOR: - Start using the spi_flash_read() API for SPI drivers that support it (i.e., SPI drivers with special memory-mapped flash modes) And other small scattered improvments" * tag 'for-linus-20160523' of git://git.infradead.org/linux-mtd: (155 commits) mtd: spi-nor: support GigaDevice gd25lq64c mtd: nand_bch: fix spelling of "probably" mtd: brcmnand: respect ECC algorithm set by NAND subsystem gpmi-nand: Handle ECC Errors in erased pages Documentation: devicetree: deprecate "soft_bch" nand-ecc-mode value mtd: nand: add support for "nand-ecc-algo" DT property mtd: mtd: drop NAND_ECC_SOFT_BCH enum value mtd: drop support for NAND_ECC_SOFT_BCH as "soft_bch" mapping mtd: nand: read ECC algorithm from the new field mtd: nand: fsmc: validate ECC setup by checking algorithm directly mtd: nand: set ECC algorithm to Hamming on fallback staging: mt29f_spinand: set ECC algorithm explicitly CRIS v32: nand: set ECC algorithm explicitly mtd: nand: atmel: set ECC algorithm explicitly mtd: nand: davinci: set ECC algorithm explicitly mtd: nand: bf5xx: set ECC algorithm explicitly mtd: nand: omap2: Fix high memory dma prefetch transfer mtd: nand: omap2: Start dma request before enabling prefetch mtd: nandsim: add __init attribute mtd: nand: move of_get_nand_xxx() helpers into nand_base.c ...
2016-05-06Merge tag 'nand/for-4.7' of github.com:linux-nand/linuxBrian Norris1-11/+35
Updates from Boris Brezillon: This pull request contains the following infrastructure changes: * introduction of the ECC algo concept to extend the ECC mode one * replacement of the nand_ecclayout infrastructure by something more future-proof. * addition of an mtd-activity led trigger to replace the nand-activity one And a bunch of specific NAND driver improvements/fixes. Here are the changes that are worth mentioning: * rework of the OMAP GPMC and NAND drivers * prepare the sunxi NAND driver to receive DMA support * handle bitflips in erased pages on GPMI revisions that do not support this in hardware. * tag 'nand/for-4.7' of github.com:linux-nand/linux: (152 commits) mtd: brcmnand: respect ECC algorithm set by NAND subsystem gpmi-nand: Handle ECC Errors in erased pages Documentation: devicetree: deprecate "soft_bch" nand-ecc-mode value mtd: nand: add support for "nand-ecc-algo" DT property mtd: mtd: drop NAND_ECC_SOFT_BCH enum value mtd: drop support for NAND_ECC_SOFT_BCH as "soft_bch" mapping mtd: nand: read ECC algorithm from the new field mtd: nand: fsmc: validate ECC setup by checking algorithm directly mtd: nand: set ECC algorithm to Hamming on fallback staging: mt29f_spinand: set ECC algorithm explicitly CRIS v32: nand: set ECC algorithm explicitly mtd: nand: atmel: set ECC algorithm explicitly mtd: nand: davinci: set ECC algorithm explicitly mtd: nand: bf5xx: set ECC algorithm explicitly mtd: nand: omap2: Fix high memory dma prefetch transfer mtd: nand: omap2: Start dma request before enabling prefetch mtd: nandsim: add __init attribute mtd: nand: move of_get_nand_xxx() helpers into nand_base.c mtd: nand: sh_flctl: rely on generic DT parsing done in nand_scan_ident() mtd: nand: mxc: rely on generic DT parsing done in nand_scan_ident() ...
2016-04-26mtd: pmc551: add __init attributeJulia Lawall1-1/+1
Add __init attribute on a function that is only called from other __init functions and that is not inlined, at least with gcc version 4.8.4 on an x86 machine with allyesconfig. Currently, the function is put in the .text.unlikely segment. Declaring it as __init will cause it to be put in the .init.text and to disappear after initialization. The result of objdump -x on the function before the change is as follows: 00000000000000c6 l F .text.unlikely 000000000000091c fixup_pmc551 And after the change it is as follows: 0000000000000000 l F .init.text 0000000000000917 fixup_pmc551 Done with the help of Coccinelle. The semantic patch checks for local static non-init functions that are called from an __init function and are not called from any other function. Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2016-04-19mtd: docg3: switch to mtd_ooblayout_opsBoris Brezillon1-11/+35
Replace the nand_ecclayout definition by the equivalent mtd_ooblayout_ops definition. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
2016-04-19mtd: docg3: use mtd_set_ecclayout() where appropriateBoris Brezillon1-1/+1
Use the mtd_set_ecclayout() helper instead of directly assigning the mtd->ecclayout field. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
2016-04-05mtd: devices: m25p80: add support for mmap read requestVignesh R1-0/+22
Certain SPI controllers may provide accelerated hardware interface to read from m25p80 type flash devices in order to provide better read performance. SPI core supports such devices with spi_flash_read() API. Call spi_flash_read(), if supported, to make use of such interface. Signed-off-by: Vignesh R <vigneshr@ti.com> [Brian: add memset()] Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2016-04-04mm, fs: get rid of PAGE_CACHE_* and page_cache_{get,release} macrosKirill A. Shutemov1-3/+3
PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time ago with promise that one day it will be possible to implement page cache with bigger chunks than PAGE_SIZE. This promise never materialized. And unlikely will. We have many places where PAGE_CACHE_SIZE assumed to be equal to PAGE_SIZE. And it's constant source of confusion on whether PAGE_CACHE_* or PAGE_* constant should be used in a particular case, especially on the border between fs and mm. Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much breakage to be doable. Let's stop pretending that pages in page cache are special. They are not. The changes are pretty straight-forward: - <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>; - PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN}; - page_cache_get() -> get_page(); - page_cache_release() -> put_page(); This patch contains automated changes generated with coccinelle using script below. For some reason, coccinelle doesn't patch header files. I've called spatch for them manually. The only adjustment after coccinelle is revert of changes to PAGE_CAHCE_ALIGN definition: we are going to drop it later. There are few places in the code where coccinelle didn't reach. I'll fix them manually in a separate patch. Comments and documentation also will be addressed with the separate patch. virtual patch @@ expression E; @@ - E << (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ expression E; @@ - E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) + E @@ @@ - PAGE_CACHE_SHIFT + PAGE_SHIFT @@ @@ - PAGE_CACHE_SIZE + PAGE_SIZE @@ @@ - PAGE_CACHE_MASK + PAGE_MASK @@ expression E; @@ - PAGE_CACHE_ALIGN(E) + PAGE_ALIGN(E) @@ expression E; @@ - page_cache_get(E) + get_page(E) @@ expression E; @@ - page_cache_release(E) + put_page(E) Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-04-04mtd: bcm47xxsflash: use ioremap_cache() instead of KSEG0ADDR()Brian Norris2-6/+26
Using KSEG0ADDR makes code highly MIPS dependent and not portable. Thanks to the fix a68f376 ("MIPS: io.h: Define `ioremap_cache'") we can use ioremap_cache which is generic and supported on MIPS as well now. KSEG0ADDR was translating 0x1c000000 into 0x9c000000. With ioremap_cache we use MIPS's __ioremap (and then remap_area_pages). This results in different address (e.g. 0xc0080000) but it still should be cached as expected and it was successfully tested with BCM47186B0. Other than that drivers/bcma/driver_chipcommon_sflash.c nicely setups a struct resource for access window, but we wren't using it. Use it now and drop duplicated info. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
2016-03-08mtd: kill the ecclayout->oobavail fieldBoris BREZILLON1-3/+2
ecclayout->oobavail is just redundant with the mtd->oobavail field. Moreover, it prevents static const definition of ecc layouts since the NAND framework is calculating this value based on the ecclayout->oobfree field. Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2016-03-08mtd: mtdram: Add parameter for setting writebuf sizeAlexander Stein1-1/+4
ubifs uses the write buffer size in recovery algorithm. When inspecting an unclean ubifs recovery fails with writebuf size 64 in mtdram while recovery on actual mtd device with writebuf size of 1024 succeeds. So add a parameter for setting this property. Signed-off-by: Alexander Stein <alexander.stein@systec-electronic.com> Reviewed-by: Richard Weinberger <richard@nod.at> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2015-11-20mtd: m25p80: replace leftover "nor-jedec" with "spi-nor" in commentsBrian Norris1-3/+3
I overlooked a few comments in commit 8947e396a829 ("Documentation: dt: mtd: replace "nor-jedec" binding with "jedec, spi-nor""). Fix these up now. Suggested-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
2015-11-20mtd: m25p80: fix module autoloading for "jedec, spi-nor" and "spi-nor"Brian Norris1-1/+10
Commit 43163022927b ("mtd: m25p80: allow arbitrary OF matching for "jedec,spi-nor"") moved the "jedec,spi-nor" handling from the spi_device_id table to the of_match_table, to better handle matching complex device tree compatible strings. With that patch, device tree support works as expected when m25p80.c is built into the kernel. However, that commit ignored the fact that: (1) (non-DT) platform devices might want to use the "spi-nor" string for matching with this driver, rather than picking an arbitrary one like "m25p80" (2) the core SPI uevent/modalias code doesn't yet support kernel module autoloading via of_match_table strings; so for DT-based devices, it will only report (part of) the first compatible string used Problem (1) has been reported previously, and I forgot to patch it up afterward. Problem (2) was noticed recently here: http://lists.infradead.org/pipermail/linux-mtd/2015-October/062369.html https://lkml.org/lkml/2015/11/12/574 Specifically, this patch fixes m25p80.ko module autoloading for cases like this: flash@xxx { compatible = "jedec,spi-nor"; ... }; because modalias of "spi:spi-nor" (the only module loading info provided by the SPI core for this device) will now be listed as an alias in m25p80.ko. Notably, it does *not* help cases like this: flash@xxx { compatible = "vendor,shiny-new-device", "jedec,spi-nor"; ... }; unless we also list "shiny-new-device" in m25p_ids[]. There has been discussion on future work for this issue here: https://lkml.org/lkml/2015/11/12/574 Cc: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com> Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
2015-11-20mtd: m25p80: drop erase() callbackBrian Norris1-17/+0
Just use the spi-nor default instead. Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2015-11-16Merge v4.4-rc1 into MTD developmentBrian Norris3-3/+0
Sync up with the upstream development. Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2015-11-12mtd: drop unnecessary partition parser dataBrian Norris3-10/+6
We should assign the MTD dev.of_node instead of the parser data field. This gets us the equivalent partition parser behavior with fewer special fields and parameter passing. Also convert several of these to mtd_device_register(), since we don't need the 2nd and 3rd parameters anymore. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Reviewed-by: Marek Vasut <marex@denx.de> Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com>
2015-11-12mtd: spi-nor: drop unnecessary partition parser dataBrian Norris1-6/+2
Now that the SPI-NOR/MTD framework pass the 'flash_node' through to the partition parsing code, we don't have to do it ourselves. Also convert to mtd_device_register(), since we don't need the 2nd and 3rd parameters anymore. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com>
2015-11-12mtd: spi-nor: convert to spi_nor_{get, set}_flash_node()Brian Norris1-1/+1
Used semantic patch with 'make coccicheck MODE=patch COCCI=script.cocci': ---8<---- virtual patch @@ struct spi_nor b; struct spi_nor *c; expression d; @@ ( -(b).flash_node = (d) +spi_nor_set_flash_node(&b, d) | -(c)->flash_node = (d) +spi_nor_set_flash_node(c, d) ) ---8<---- And a manual conversion for the one use of spi_nor_get_flash_node(). Signed-off-by: Brian Norris <computersforpeace@gmail.com> Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com>
2015-11-06Merge tag 'for-linus-20151106' of git://git.infradead.org/linux-mtdLinus Torvalds7-22/+50
Pull MTD updates from Brian Norris: "Core: - WARN (in some cases) when a struct mtd_info is registered multiple times; in the past this was "supported", but it's still error prone for future development. There's only one ugly case of this left in the tree (that we're aware of) and the owners are aware of the problems there. - fix potential deadlock in the blkdev removal path NOTE: the (potential) deadlock was introduced in a for-stable patch. This one is also marked for -stable. - ioctl(BLKPG) compat_ioctl support; resolves issues with 32-bit user space vs 64-bit kernel space - Set MTD parent device correctly throughout the tree, so the tree structure appears correctly in sysfs; many drivers were missing this (soft) requirement - Move device tree partitions (ofpart) into a dedicated 'partitions' subnode; this helps to disambiguate whether a node is a partition or some other auxiliary data - Improve error handling for partitioning failures NAND: - General: Increase timeout period, for corner-case systems with less-than-accurate jiffies - Fix OF-based autoloading of several NAND drivers when built as modules - pxa3xx_nand: - Rework timing configuration to be more dynamic - Refactor PM support - brcmnand: prepare for NorthStar 2 support (ARM64, 16-bit NAND chips) - sunxi_nand: refactoring and a few bug fixes - vf610: new NAND driver - FSMC: add SW BCH support; support common NAND DT bindings - lpc32xx_slc: refactor and improve timing calculations logic - denali: support for rev 5.1 SPI NOR: - Layering improvements - Added Winbond lock/unlock support - Added mtd_is_locked() (i.e., ioctl(MEMISLOCKED)) support - Increase full-chip-erase timeout linearly with flash size - fsl-quadspi: fix compile for non-ARM architectures - New flash support" * tag 'for-linus-20151106' of git://git.infradead.org/linux-mtd: (169 commits) mtd: don't WARN about overloaded users of mtd->reboot_notifier.notifier_call mtd: nand: sunxi: avoid retrieving data before ECC pass mtd: nand: sunxi: fix sunxi_nfc_hw_ecc_read/write_chunk() mtd: blkdevs: fix potential deadlock + lockdep warnings mtd: ofpart: move ofpart partitions to a dedicated dt node doc: dt: mtd: support partitions in a special 'partitions' subnode mtd: brcmnand: Force 8bit mode before doing nand_scan_ident() mtd: brcmnand: factor out CFG and CFG_EXT bitfields mtd: mtdpart: Do not fail mtd probe when parsing partitions fails mtd: fsl-quadspi: fix macro collision problems with READ/WRITE mtd: warn when registering the same master many times mtd: fixup corner case error handling in mtd_device_parse_register() mtd: tests: Replace timeval with ktime_t mtd: fsmc_nand: Add BCH4 SW ECC support for SPEAr600 mtd: nand: vf610_nfc: use nand_check_erased_ecc_chunk() helper mtd: nand: increase ready wait timeout and report timeouts mtd: docg3: off by one in doc_register_sysfs() mtd: pxa3xx_nand: clean up the pxa3xx timings mtd: pxa3xx_nand: rework flash detection and timing setup mtd: pxa3xx_nand: add helpers to setup the timings ...
2015-10-28spi: Drop owner assignment from spi_driversAndrew F. Davis3-3/+0
An spi_driver does not need to set an owner, it will be populated by the driver core. Signed-off-by: Andrew F. Davis <afd@ti.com> Acked-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2015-10-26mtd: docg3: off by one in doc_register_sysfs()Dan Carpenter1-6/+16
Smatch found a bug in the error handling: drivers/mtd/devices/docg3.c:1634 doc_register_sysfs() error: buffer overflow 'doc_sys_attrs' 4 <= 4 The problem is that if the very last device_create_file() fails, then we are beyond the end of the array. Actually, any time i == 3 then there is a problem. We can fix this an simplify the code at the same time by moving the !ret conditions out of the for loops and using a goto instead. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2015-10-20mtd: mtdram: check offs and len in mtdram->eraseDongsheng Yang1-0/+21
We should prevent user to erasing mtd device with an unaligned offset or length. Signed-off-by: Dongsheng Yang <yangds.fnst@cn.fujitsu.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2015-10-13mtd: devices: sst251: show parent device in sysfsFrans Klaver1-2/+1
Fix a bug where mtd parent device symlinks aren't shown in sysfs. While at it, make use of the default owner value set by mtdcore. Signed-off-by: Frans Klaver <fransklaver@gmail.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2015-10-13mtd: devices: spear_smi: show parent device in sysfsFrans Klaver1-0/+1
Fix a bug where mtd parent device symlinks aren't shown in sysfs. Signed-off-by: Frans Klaver <fransklaver@gmail.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2015-10-13mtd: devices: mtd_dataflash: drop owner assignmentFrans Klaver1-1/+0
Owner is automatically set by mtdcore. Make use of that. Signed-off-by: Frans Klaver <fransklaver@gmail.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2015-10-13mtd: devices: docg3: show parent device in sysfsFrans Klaver1-1/+1
Fix a bug where mtd parent device symlinks aren't shown in sysfs. While at it, make use of the default owner value set by mtdcore. Signed-off-by: Frans Klaver <fransklaver@gmail.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2015-10-13mtd: devices: bcm47xxflash: show parent device in sysfsFrans Klaver1-3/+4
Fix a bug where mtd parent device symlinks aren't shown in sysfs. While at it, make use of the default owner value set by mtdcore. Signed-off-by: Frans Klaver <fransklaver@gmail.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2015-09-30Revert "mtd: mtdram: check offs and len in mtdram->erase"Brian Norris1-21/+0
This reverts commit 7827e3acad2df1c6537e5fe7211d216dabc60399. There are some 64-bit arithmetic issues on some architectures, so let's wait until we get a better patch for this. Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2015-09-30mtd: mtdram: check offs and len in mtdram->eraseDongsheng Yang1-0/+21
We should prevent user to erasing mtd device with an unaligned offset or length. Signed-off-by: Dongsheng Yang <yangds.fnst@cn.fujitsu.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2015-09-14Merge tag 'v4.3-rc1' into MTD -next developmentBrian Norris1-1/+1
2015-09-12mtd: spi-nor: Zap unneeded write_enable from write_regJagan Teki1-2/+1
The 'write_enable' argument is unused and unneeded, so remove it from the API. Signed-off-by: Jagan Teki <jteki@openedev.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Han Xu <han.xu@freescale.com> [Brian: fixed for nxp-spifi.c] Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2015-09-12mtd: spi-nor: Decouple SPI NOR's device_node from controller deviceMarek Vasut1-0/+1
The problem this patch is trying to address is such, that SPI NOR flash devices attached to a dedicated SPI NOR controller cannot read their properties from the associated struct device_node. A couple of facts first: 1) Each SPI NOR flash has a struct spi_nor associated with it. 2) Each SPI NOR flash has certain device properties associated with it, for example the OF property 'm25p,fast-read' is a good pick. These properties are used by the SPI NOR core to select which opcodes are sent to such SPI NOR flash. These properties are coming from spi_nor .dev->of_node . The problem is, that for SPI NOR controllers, the struct spi_nor .dev element points to the struct device of the SPI NOR controller, not the SPI NOR flash. Therefore, the associated dev->of_node also is the one of the controller and therefore the SPI NOR core code is trying to parse the SPI NOR controller's properties, not the properties of the SPI NOR flash. Note: The m25p80 driver is not affected, because the controller and the flash are the same device, so the associated device_node of the controller and the flash are the same. This patch adjusts the SPI NOR core such that the device_node is not picked from spi_nor .dev directly, but from a new separate spi_nor .flash_node element. This let's the SPI NOR controller drivers set up a different spi_nor .flash_node element for each SPI NOR flash. This patch also fixes the controller drivers to be compatible with this modification and correctly set the spi_nor .flash_node element. This patch is inspired by 5844feeaa4154d1c46d3462c7a4653d22356d8b4 mtd: nand: add common DT init code Signed-off-by: Marek Vasut <marex@denx.de> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2015-09-09Merge tag 'libnvdimm-for-4.3' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm Pull libnvdimm updates from Dan Williams: "This update has successfully completed a 0day-kbuild run and has appeared in a linux-next release. The changes outside of the typical drivers/nvdimm/ and drivers/acpi/nfit.[ch] paths are related to the removal of IORESOURCE_CACHEABLE, the introduction of memremap(), and the introduction of ZONE_DEVICE + devm_memremap_pages(). Summary: - Introduce ZONE_DEVICE and devm_memremap_pages() as a generic mechanism for adding device-driver-discovered memory regions to the kernel's direct map. This facility is used by the pmem driver to enable pfn_to_page() operations on the page frames returned by DAX ('direct_access' in 'struct block_device_operations'). For now, the 'memmap' allocation for these "device" pages comes from "System RAM". Support for allocating the memmap from device memory will arrive in a later kernel. - Introduce memremap() to replace usages of ioremap_cache() and ioremap_wt(). memremap() drops the __iomem annotation for these mappings to memory that do not have i/o side effects. The replacement of ioremap_cache() with memremap() is limited to the pmem driver to ease merging the api change in v4.3. Completion of the conversion is targeted for v4.4. - Similar to the usage of memcpy_to_pmem() + wmb_pmem() in the pmem driver, update the VFS DAX implementation and PMEM api to provide persistence guarantees for kernel operations on a DAX mapping. - Convert the ACPI NFIT 'BLK' driver to map the block apertures as cacheable to improve performance. - Miscellaneous updates and fixes to libnvdimm including support for issuing "address range scrub" commands, clarifying the optimal 'sector size' of pmem devices, a clarification of the usage of the ACPI '_STA' (status) property for DIMM devices, and other minor fixes" * tag 'libnvdimm-for-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: (34 commits) libnvdimm, pmem: direct map legacy pmem by default libnvdimm, pmem: 'struct page' for pmem libnvdimm, pfn: 'struct page' provider infrastructure x86, pmem: clarify that ARCH_HAS_PMEM_API implies PMEM mapped WB add devm_memremap_pages mm: ZONE_DEVICE for "device memory" mm: move __phys_to_pfn and __pfn_to_phys to asm/generic/memory_model.h dax: drop size parameter to ->direct_access() nd_blk: change aperture mapping from WC to WB nvdimm: change to use generic kvfree() pmem, dax: have direct_access use __pmem annotation dax: update I/O path to do proper PMEM flushing pmem: add copy_from_iter_pmem() and clear_pmem() pmem, x86: clean up conditional pmem includes pmem: remove layer when calling arch_has_wmb_pmem() pmem, x86: move x86 PMEM API to new pmem.h header libnvdimm, e820: make CONFIG_X86_PMEM_LEGACY a tristate option pmem: switch to devm_ allocations devres: add devm_memremap libnvdimm, btt: write and validate parent_uuid ...
2015-09-03mtd: spi-nor: embed struct mtd_info within struct spi_norBrian Norris1-6/+4
This reflects the proper layering, so let's do it. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Tested-by: Joachim Eastwood <manabian@gmail.com>
2015-09-03mtd: spi-nor: assign mtd->priv in spi_nor_scan()Brian Norris1-1/+0
Layering suggests that the SPI NOR layer (not the hardware driver) should be initializing the MTD layer. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Tested-by: Joachim Eastwood <manabian@gmail.com>
2015-08-22mtd: dataflash: Export OF module alias informationJavier Martinez Canillas1-0/+1
The SPI core currently reports the MODALIAS uevent as "spi:<modalias>" even for SPI devices that were registered by OF. That means the OF module alias exported by MODULE_OF_TABLE(of,...) is currently not used and user-space has no way to autoload this module. But it is still a good practice to add the OF module alias information into the kernel module even when it currently is unused so once the SPI core is changed to report a correct OF modalias uevent, module autoloading will be working for this driver. Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2015-08-11arch, drivers: don't include <asm/io.h> directly, use <linux/io.h> insteadDan Williams1-1/+1
Preparation for uniform definition of ioremap, ioremap_wc, ioremap_wt, and ioremap_cache, tree-wide. Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2015-07-21mtd: m25p80: allow arbitrary OF matching for "jedec,spi-nor"Brian Norris1-7/+11
When we added the "jedec,spi-nor" compatible string for use in this driver, we added it as a modalias option. The modalias can be derived in different ways for platform devices vs. device tree (of_*) matching. But for device tree matching (the primary target of this identifier string), the modalias is determined from the first entry in the 'compatible' property. IOW, the following properties would bind to this driver: // Option (a), modalias = "spi-nor" compatible = "jedec,spi-nor"; // Option (b), modalias = "spi-nor" compatible = "idontknowwhatimdoing,spi-nor"; But the following would not: // Option (c), modalias = "shinynewdevice" compatible = "myvendor,shinynewdevice", "jedec,spi-nor"; So, we'd like to match (a) and (c) (even when we don't have an explicit entry for "shinynewdevice"), and we'd rather not allow (b). To do this, we (1) always (for devices without specific platform data) pass the modalias to the spi-nor library; (2) rework the spi-nor library to not reject "bad" names, and instead just fall back to autodetection; and (3) add the .of_match_table to properly catch all "jedec,spi-nor". This allows (a) and (c) without warnings, and rejects (b). Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2015-06-26Merge branch 'for-4.2/writeback' of git://git.kernel.dk/linux-blockLinus Torvalds1-0/+1
Pull cgroup writeback support from Jens Axboe: "This is the big pull request for adding cgroup writeback support. This code has been in development for a long time, and it has been simmering in for-next for a good chunk of this cycle too. This is one of those problems that has been talked about for at least half a decade, finally there's a solution and code to go with it. Also see last weeks writeup on LWN: http://lwn.net/Articles/648292/" * 'for-4.2/writeback' of git://git.kernel.dk/linux-block: (85 commits) writeback, blkio: add documentation for cgroup writeback support vfs, writeback: replace FS_CGROUP_WRITEBACK with SB_I_CGROUPWB writeback: do foreign inode detection iff cgroup writeback is enabled v9fs: fix error handling in v9fs_session_init() bdi: fix wrong error return value in cgwb_create() buffer: remove unusued 'ret' variable writeback: disassociate inodes from dying bdi_writebacks writeback: implement foreign cgroup inode bdi_writeback switching writeback: add lockdep annotation to inode_to_wb() writeback: use unlocked_inode_to_wb transaction in inode_congested() writeback: implement unlocked_inode_to_wb transaction and use it for stat updates writeback: implement [locked_]inode_to_wb_and_lock_list() writeback: implement foreign cgroup inode detection writeback: make writeback_control track the inode being written back writeback: relocate wb[_try]_get(), wb_put(), inode_{attach|detach}_wb() mm: vmscan: disable memcg direct reclaim stalling if cgroup writeback support is in use writeback: implement memcg writeback domain based throttling writeback: reset wb_domain->dirty_limit[_tstmp] when memcg domain size changes writeback: implement memcg wb_domain writeback: update wb_over_bg_thresh() to use wb_domain aware operations ...
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-23 23:48:43 +0300