summaryrefslogtreecommitdiff
path: root/drivers/mtd/bcm63xxpart.c
AgeCommit message (Collapse)AuthorFilesLines
2016-03-08mtd: bcm63xxpart: give width specifier an 'int', not 'size_t'Brian Norris1-4/+4
Fixes this warning: >> drivers/mtd/bcm63xxpart.c:175:4: note: in expansion of macro 'pr_err' pr_err("invalid rootfs address: %*ph\n", ^ >> include/linux/kern_levels.h:4:18: warning: field width specifier '*' expects argument of type 'int', but argument 2 has type 'long unsigned int' [-Wformat=] Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2016-02-12mtd: bcm63xxpart: Move NOR flash layout to a separate functionSimon Arlott1-22/+32
Move the NOR flash layout to a separate function to allow the NAND flash layout to be supported. Signed-off-by: Simon Arlott <simon@fire.lp0.eu> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2016-02-12mtd: bcm63xxpart: Null terminate and validate conversion of flash stringsSimon Arlott1-4/+34
Strings read from flash could be missing null termination characters, or not contain valid integers. Null terminate the strings and check for errors when converting them to integers. Also validate that the addresses are at least BCM963XX_EXTENDED_SIZE because this will be subtracted from them. Signed-off-by: Simon Arlott <simon@fire.lp0.eu> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2016-02-12mtd: bcm63xxpart: Extract read of image tag to separate functionSimon Arlott1-22/+40
Extract image tag reading and CRC check to a separate function. Signed-off-by: Simon Arlott <simon@fire.lp0.eu> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2016-02-12mtd: bcm63xxpart: Remove dependency on mach-bcm63xxSimon Arlott1-15/+57
Read nvram directly from flash instead of using the in-memory copy that mach-bcm63xx has, to remove the dependency on mach-bcm63xx and allow the parser to work on bmips too. Rename remaining BCM63XX defines to BCM963XX as these are properties of the flash layout on the board. BCM963XX_DEFAULT_PSI_SIZE changes from SZ_64K to 64 because it will be multiplied by SZ_1K later on. Signed-off-by: Simon Arlott <simon@fire.lp0.eu> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2016-01-24Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds1-5/+3
Pull MIPS updates from Ralf Baechle: "This is the main pull request for MIPS for 4.5 plus some 4.4 fixes. The executive summary: - ATH79 platform improvments, use DT bindings for the ATH79 USB PHY. - Avoid useless rebuilds for zboot. - jz4780: Add NEMC, BCH and NAND device tree nodes - Initial support for the MicroChip's DT platform. As all the device drivers are missing this is still of limited use. - Some Loongson3 cleanups. - The unavoidable whitespace polishing. - Reduce clock skew when synchronizing the CPU cycle counters on CPU startup. - Add MIPS R6 fixes. - Lots of cleanups across arch/mips as fallout from KVM. - Lots of minor fixes and changes for IEEE 754-2008 support to the FPU emulator / fp-assist software. - Minor Ralink, BCM47xx and bcm963xx platform support improvments. - Support SMP on BCM63168" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (84 commits) MIPS: zboot: Add support for serial debug using the PROM MIPS: zboot: Avoid useless rebuilds MIPS: BMIPS: Enable ARCH_WANT_OPTIONAL_GPIOLIB MIPS: bcm63xx: nvram: Remove unused bcm63xx_nvram_get_psi_size() function MIPS: bcm963xx: Update bcm_tag field image_sequence MIPS: bcm963xx: Move extended flash address to bcm_tag header file MIPS: bcm963xx: Move Broadcom BCM963xx image tag data structure MIPS: bcm63xx: nvram: Use nvram structure definition from header file MIPS: bcm963xx: Add Broadcom BCM963xx board nvram data structure MAINTAINERS: Add KVM for MIPS entry MIPS: KVM: Add missing newline to kvm_err() MIPS: Move KVM specific opcodes into asm/inst.h MIPS: KVM: Use cacheops.h definitions MIPS: Break down cacheops.h definitions MIPS: Use EXCCODE_ constants with set_except_vector() MIPS: Update trap codes MIPS: Move Cause.ExcCode trap codes to mipsregs.h MIPS: KVM: Make kvm_mips_{init,exit}() static MIPS: KVM: Refactor added offsetof()s MIPS: KVM: Convert EXPORT_SYMBOL to _GPL ...
2016-01-24MIPS: bcm963xx: Move extended flash address to bcm_tag header fileSimon Arlott1-4/+2
The extended flash address needs to be subtracted from bcm_tag flash image offsets. Move this value to the bcm_tag header file. Renamed define name to consistently use bcm963xx for flash layout which should be considered a property of the board and not the SoC (i.e. bcm63xx could theoretically be used on a board without CFE or any flash). Signed-off-by: Simon Arlott <simon@fire.lp0.eu> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Brian Norris <computersforpeace@gmail.com> Cc: Kevin Cernekee <cernekee@gmail.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Jonas Gorski <jogo@openwrt.org> Cc: Linux Kernel Mailing List <linux-kernel@vger.kernel.org> Cc: MIPS Mailing List <linux-mips@linux-mips.org> Cc: MTD Maling List <linux-mtd@lists.infradead.org> Patchwork: https://patchwork.linux-mips.org/patch/11833/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2016-01-24MIPS: bcm963xx: Move Broadcom BCM963xx image tag data structureSimon Arlott1-1/+1
Move Broadcom BCM963xx image tag data structure to include/linux/ so that drivers outside of mach-bcm63xx can use it. Signed-off-by: Simon Arlott <simon@fire.lp0.eu> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Brian Norris <computersforpeace@gmail.com> Cc: Kevin Cernekee <cernekee@gmail.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Jonas Gorski <jogo@openwrt.org> Cc: Linux Kernel Mailing List <linux-kernel@vger.kernel.org> Cc: MIPS Mailing List <linux-mips@linux-mips.org> Cc: MTD Maling List <linux-mtd@lists.infradead.org> Patchwork: https://patchwork.linux-mips.org/patch/11832/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2015-12-09mtd: partitions: make parsers return 'const' partition arraysBrian Norris1-1/+1
We only want to modify these arrays inside the parser "drivers", so the drivers should construct them however they like, then return them as immutable arrays. This will make other refactorings easier. Signed-off-by: Brian Norris <computersforpeace@gmail.com> Reviewed-by: Boris Brezillon <boris.brezillon@free-electrons.com>
2015-11-20mtd: kill off MTD partition parser boilerplateBrian Norris1-15/+1
Most parsers can be handled with our new boilerplate-reducing macro. There are a few that can't be (cmdlineparts and ofpart). Also kill off the owner assignments, since register_mtd_parser() now takes care of that. Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2014-01-03mtd: make register_mtd_parser return voidAxel Lin1-1/+2
register_mtd_parser never fails; hence make it return void. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Brian Norris <computersforpeace@gmail.com>
2013-08-05mtd: bcm63xxpart: use nvram for PSI sizeJonas Gorski1-2/+4
Read out the SPI size from nvram instead of defaulting to 64KiB — some vendors actually use values larger than the "max" value of 64. Signed-off-by: Jonas Gorski <jogo@openwrt.org> Acked-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2013-08-05mtd: bcm63xxpart: use size macro for CFE block sizeJonas Gorski1-1/+2
Signed-off-by: Jonas Gorski <jogo@openwrt.org> Acked-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-11-21mtd: bcm63xxpart: use correct printk format for partitionsJonas Gorski1-3/+2
Use ll to be able to remove the casts. Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> Reviewed-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-11-21mtd: bcm63xxpart: move the last curpart++ to its correct placeJonas Gorski1-1/+1
The line belongs above the comment, not below it. Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> Reviewed-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-11-21mtd: bcm63xxpart: make fixed part length calculation more genericJonas Gorski1-4/+7
The CFE does not use 4K sectors even if the flash supports it, so for the fixed partitions like CFE itself or NVRAM the erase block size is always 64k or bigger. Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> Reviewed-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-11-21mtd: bcm63xxpart: merge sparelen calculationJonas Gorski1-2/+1
The length of the spare part is calculated the same way in both branches so move to a common place. Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> Reviewed-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-11-21mtd: bcm63xxpart: remove unused variableJonas Gorski1-8/+3
namelen is never used, so drop it. Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> Reviewed-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-05-14mtd: bcm63xxpart: handle Broadcom partition orderJonas Gorski1-11/+30
The original Broadcom partition order has the root fs in front of the kernel, which resulted in miscalculated partition sizes. Detect when such an image is on the flash and also reorder the partitions accordingly. Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> Acked-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-01-09mtd: introduce mtd_read interfaceArtem Bityutskiy1-6/+6
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-01-09mtd: bcm63xxpart: check the image tag's crc32Jonas Gorski1-16/+29
Only use the values from the image tag if it is valid. Always create the CFE, NVRAM and linux partitions, to allow flashing a new image even if the old is invalid without overwriting CFE or NVRAM. Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-01-09mtd: bcm63xxpart: don't assume NVRAM is always the fourth partitionJonas Gorski1-2/+2
Instead of referencing the sizes of fixed partitions, use the precomputed CFE/NVRAM lengths. Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-01-09mtd: bcm63xxpart: make sure CFE and NVRAM partitions are at least 64KiBJonas Gorski1-7/+15
The CFE boot loader on BCM63XX platforms assumes itself and the NVRAM partition to be 64 KiB (or erase block sized, if larger). Ensure this assumption is also met when creating the partitions to prevent accidential erasure of CFE or NVRAM. Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-01-09mtd: bcm63xxpart: check version marker string for newer CFEsJonas Gorski1-5/+17
Recent CFEs do not contain the CFE1CFE1 magic anymore, so check for the "cfe-v" version marker string instead. As very old CFEs do not have this string, leave the CFE1CFE1 magic as a fallback for detection. Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2012-01-09mtd: maps: bcm963xx-flash: make CFE partition parsing an mtd parserJonas Gorski1-0/+189
Recent BCM63XX devices support a variety of flash types (parallel, SPI, NAND) and share the partition layout. To prevent code duplication make the CFE partition parsing code a stand alone mtd parser to allow SPI or NAND flash drivers to use it. Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com> Acked-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@linux.intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-23 23:31:33 +0300