summaryrefslogtreecommitdiff
path: root/drivers/mmc
AgeCommit message (Collapse)AuthorFilesLines
2023-08-02mmc: starfive: Unify the MMC code on evb/vf2/devkitsWilliam Qiu1-9/+46
Unify the MMC code on evb/vf2/devkits to resolve conflicts when merging the code. Signed-off-by: William Qiu <william.qiu@starfivetech.com>
2023-07-26mmc: starfive: change the tuning methodWilliam Qiu1-76/+37
Previously, the system controller register was used to do tuning, but it was only useful for HS200, so now change the tuning mode to use the UHS_REG_EXT register, and delete the previous code about syscon Signed-off-by: William Qiu <william.qiu@starfivetech.com>
2023-04-14starfive: copyright: modify related descriptionWilliam Qiu1-10/+4
Modify related description. Signed-off-by: William Qiu <william.qiu@starfivetech.com>
2023-02-13hibernation: mmc: change the runtime PM APIWilliam Qiu1-34/+2
Use the common API to do the runtime PM. Signed-off-by: William Qiu <william.qiu@starfivetech.com>
2022-10-27SDIO:starfive:modify SDIO/EMMC runtime PM callback functionWilliam Qiu1-3/+6
modify SDIO/EMMC runtime PM callback function. Signed-off-by: William Qiu <william.qiu@starfivetech.com>
2022-10-27SDIO:starfive:add SDIO/EMMC runtime pm opsWilliam Qiu1-6/+68
add SDIO/EMMC runtime pm ops. Signed-off-by: William Qiu <william.qiu@starfivetech.com>
2022-09-09SDIO:starfive:Add the starfive private driver for SDIOWilliam Qiu3-0/+235
Add the starfive private driver for SDIO Signed-off-by: William Qiu <william.qiu@starfivetech.com>
2021-10-29mmc: tmio: reenable card irqs after the reset callbackWolfram Sang1-5/+12
The reset callback may clear the internal card detect interrupts, so make sure to reenable them if needed. Fixes: b4d86f37eacb ("mmc: renesas_sdhi: do hard reset if possible") Reported-by: Biju Das <biju.das.jz@bp.renesas.com> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20211028195149.8003-1-wsa+renesas@sang-engineering.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-10-28mmc: mediatek: Move cqhci init behind ungate clockWenbin Mei1-19/+19
We must enable clock before cqhci init, because crypto needs read information from CQHCI registers, otherwise, it will hang in MediaTek mmc host controller. Signed-off-by: Wenbin Mei <wenbin.mei@mediatek.com> Fixes: 88bd652b3c74 ("mmc: mediatek: command queue support") Cc: stable@vger.kernel.org Acked-by: Chaotian Jing <chaotian.jing@mediatek.com> Link: https://lore.kernel.org/r/20211028022049.22129-1-wenbin.mei@mediatek.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-10-26mmc: cqhci: clear HALT state after CQE enableWenbin Mei1-0/+3
While mmc0 enter suspend state, we need halt CQE to send legacy cmd(flush cache) and disable cqe, for resume back, we enable CQE and not clear HALT state. In this case MediaTek mmc host controller will keep the value for HALT state after CQE disable/enable flow, so the next CQE transfer after resume will be timeout due to CQE is in HALT state, the log as below: <4>.(4)[318:kworker/4:1H]mmc0: cqhci: timeout for tag 2 <4>.(4)[318:kworker/4:1H]mmc0: cqhci: ============ CQHCI REGISTER DUMP =========== <4>.(4)[318:kworker/4:1H]mmc0: cqhci: Caps: 0x100020b6 | Version: 0x00000510 <4>.(4)[318:kworker/4:1H]mmc0: cqhci: Config: 0x00001103 | Control: 0x00000001 <4>.(4)[318:kworker/4:1H]mmc0: cqhci: Int stat: 0x00000000 | Int enab: 0x00000006 <4>.(4)[318:kworker/4:1H]mmc0: cqhci: Int sig: 0x00000006 | Int Coal: 0x00000000 <4>.(4)[318:kworker/4:1H]mmc0: cqhci: TDL base: 0xfd05f000 | TDL up32: 0x00000000 <4>.(4)[318:kworker/4:1H]mmc0: cqhci: Doorbell: 0x8000203c | TCN: 0x00000000 <4>.(4)[318:kworker/4:1H]mmc0: cqhci: Dev queue: 0x00000000 | Dev Pend: 0x00000000 <4>.(4)[318:kworker/4:1H]mmc0: cqhci: Task clr: 0x00000000 | SSC1: 0x00001000 <4>.(4)[318:kworker/4:1H]mmc0: cqhci: SSC2: 0x00000001 | DCMD rsp: 0x00000000 <4>.(4)[318:kworker/4:1H]mmc0: cqhci: RED mask: 0xfdf9a080 | TERRI: 0x00000000 <4>.(4)[318:kworker/4:1H]mmc0: cqhci: Resp idx: 0x00000000 | Resp arg: 0x00000000 <4>.(4)[318:kworker/4:1H]mmc0: cqhci: CRNQP: 0x00000000 | CRNQDUN: 0x00000000 <4>.(4)[318:kworker/4:1H]mmc0: cqhci: CRNQIS: 0x00000000 | CRNQIE: 0x00000000 This change check HALT state after CQE enable, if CQE is in HALT state, we will clear it. Signed-off-by: Wenbin Mei <wenbin.mei@mediatek.com> Cc: stable@vger.kernel.org Acked-by: Adrian Hunter <adrian.hunter@intel.com> Fixes: a4080225f51d ("mmc: cqhci: support for command queue enabled host") Link: https://lore.kernel.org/r/20211026070812.9359-1-wenbin.mei@mediatek.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-10-26mmc: vub300: fix control-message timeoutsJohan Hovold1-9/+9
USB control-message timeouts are specified in milliseconds and should specifically not vary with CONFIG_HZ. Fixes: 88095e7b473a ("mmc: Add new VUB300 USB-to-SD/SDIO/MMC driver") Cc: stable@vger.kernel.org # 3.0 Signed-off-by: Johan Hovold <johan@kernel.org> Link: https://lore.kernel.org/r/20211025115608.5287-1-johan@kernel.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-10-26mmc: dw_mmc: exynos: fix the finding clock sample valueJaehoon Chung1-0/+14
Even though there are candiates value if can't find best value, it's returned -EIO. It's not proper behavior. If there is not best value, use a first candiate value to work eMMC. Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Tested-by: Christian Hewitt <christianshewitt@gmail.com> Cc: stable@vger.kernel.org Fixes: c537a1c5ff63 ("mmc: dw_mmc: exynos: add variable delay tuning sequence") Link: https://lore.kernel.org/r/20211022082106.1557-1-jh80.chung@samsung.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-10-19mmc: winbond: don't build on M68KRandy Dunlap1-1/+1
The Winbond MMC driver fails to build on ARCH=m68k so prevent that build config. Silences these build errors: ../drivers/mmc/host/wbsd.c: In function 'wbsd_request_end': ../drivers/mmc/host/wbsd.c:212:28: error: implicit declaration of function 'claim_dma_lock' [-Werror=implicit-function-declaration] 212 | dmaflags = claim_dma_lock(); ../drivers/mmc/host/wbsd.c:215:17: error: implicit declaration of function 'release_dma_lock'; did you mean 'release_task'? [-Werror=implicit-function-declaration] 215 | release_dma_lock(dmaflags); Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Pierre Ossman <pierre@ossman.eu> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20211017175949.23838-1-rdunlap@infradead.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-10-19mmc: sdhci-esdhc-imx: clear the buffer_read_ready to reset standard tuning ↵Haibo Chen1-0/+16
circuit To reset standard tuning circuit completely, after clear ESDHC_MIX_CTRL_EXE_TUNE, also need to clear bit buffer_read_ready, this operation will finally clear the USDHC IP internal logic flag execute_tuning_with_clr_buf, make sure the following normal data transfer will not be impacted by standard tuning logic used before. Find this issue when do quick SD card insert/remove stress test. During standard tuning prodedure, if remove SD card, USDHC standard tuning logic can't clear the internal flag execute_tuning_with_clr_buf. Next time when insert SD card, all data related commands can't get any data related interrupts, include data transfer complete interrupt, data timeout interrupt, data CRC interrupt, data end bit interrupt. Always trigger software timeout issue. Even reset the USDHC through bits in register SYS_CTRL (0x2C, bit28 reset tuning, bit26 reset data, bit 25 reset command, bit 24 reset all) can't recover this. From the user's point of view, USDHC stuck, SD can't be recognized any more. Fixes: d9370424c948 ("mmc: sdhci-esdhc-imx: reset tuning circuit when power on mmc card") Signed-off-by: Haibo Chen <haibo.chen@nxp.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/1634263236-6111-1-git-send-email-haibo.chen@nxp.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-10-14mmc: sdhci-pci: Read card detect from ACPI for Intel MerrifieldAndy Shevchenko1-5/+24
Intel Merrifield platform had been converted to use ACPI enumeration. However, the driver missed an update to retrieve card detect GPIO. Fix it here. Unfortunately we can't rely on CD GPIO state because there are two different PCB designs in the wild that are using the opposite card detection sense and there is no way to distinguish those platforms, that's why ignore CD GPIO completely and use it only as an event. Fixes: 4590d98f5a4f ("sfi: Remove framework for deprecated firmware") BugLink: https://github.com/edison-fw/meta-intel-edison/issues/135 Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20211013201723.52212-2-andriy.shevchenko@linux.intel.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-10-12mmc: sdhci: Map more voltage level to SDHCI_POWER_330Shawn Guo1-0/+6
On Thundercomm TurboX CM2290, the eMMC OCR reports vdd = 23 (3.5 ~ 3.6 V), which is being treated as an invalid value by sdhci_set_power_noreg(). And thus eMMC is totally broken on the platform. [ 1.436599] ------------[ cut here ]------------ [ 1.436606] mmc0: Invalid vdd 0x17 [ 1.436640] WARNING: CPU: 2 PID: 69 at drivers/mmc/host/sdhci.c:2048 sdhci_set_power_noreg+0x168/0x2b4 [ 1.436655] Modules linked in: [ 1.436662] CPU: 2 PID: 69 Comm: kworker/u8:1 Tainted: G W 5.15.0-rc1+ #137 [ 1.436669] Hardware name: Thundercomm TurboX CM2290 (DT) [ 1.436674] Workqueue: events_unbound async_run_entry_fn [ 1.436685] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 1.436692] pc : sdhci_set_power_noreg+0x168/0x2b4 [ 1.436698] lr : sdhci_set_power_noreg+0x168/0x2b4 [ 1.436703] sp : ffff800010803a60 [ 1.436705] x29: ffff800010803a60 x28: ffff6a9102465f00 x27: ffff6a9101720a70 [ 1.436715] x26: ffff6a91014de1c0 x25: ffff6a91014de010 x24: ffff6a91016af280 [ 1.436724] x23: ffffaf7b1b276640 x22: 0000000000000000 x21: ffff6a9101720000 [ 1.436733] x20: ffff6a9101720370 x19: ffff6a9101720580 x18: 0000000000000020 [ 1.436743] x17: 0000000000000000 x16: 0000000000000004 x15: ffffffffffffffff [ 1.436751] x14: 0000000000000000 x13: 00000000fffffffd x12: ffffaf7b1b84b0bc [ 1.436760] x11: ffffaf7b1b720d10 x10: 000000000000000a x9 : ffff800010803a60 [ 1.436769] x8 : 000000000000000a x7 : 000000000000000f x6 : 00000000fffff159 [ 1.436778] x5 : 0000000000000000 x4 : 0000000000000000 x3 : 00000000ffffffff [ 1.436787] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff6a9101718d80 [ 1.436797] Call trace: [ 1.436800] sdhci_set_power_noreg+0x168/0x2b4 [ 1.436805] sdhci_set_ios+0xa0/0x7fc [ 1.436811] mmc_power_up.part.0+0xc4/0x164 [ 1.436818] mmc_start_host+0xa0/0xb0 [ 1.436824] mmc_add_host+0x60/0x90 [ 1.436830] __sdhci_add_host+0x174/0x330 [ 1.436836] sdhci_msm_probe+0x7c0/0x920 [ 1.436842] platform_probe+0x68/0xe0 [ 1.436850] really_probe.part.0+0x9c/0x31c [ 1.436857] __driver_probe_device+0x98/0x144 [ 1.436863] driver_probe_device+0xc8/0x15c [ 1.436869] __device_attach_driver+0xb4/0x120 [ 1.436875] bus_for_each_drv+0x78/0xd0 [ 1.436881] __device_attach_async_helper+0xac/0xd0 [ 1.436888] async_run_entry_fn+0x34/0x110 [ 1.436895] process_one_work+0x1d0/0x354 [ 1.436903] worker_thread+0x13c/0x470 [ 1.436910] kthread+0x150/0x160 [ 1.436915] ret_from_fork+0x10/0x20 [ 1.436923] ---[ end trace fcfac44cb045c3a8 ]--- Fix the issue by mapping MMC_VDD_35_36 (and MMC_VDD_34_35) to SDHCI_POWER_330 as well. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20211004024935.15326-1-shawn.guo@linaro.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-10-08Merge tag 'asm-generic-fixes-5.15' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic Pull asm-generic fixes from Arnd Bergmann: "There is one build fix for Arm platforms that ended up impacting most architectures because of the way the drivers/firmware Kconfig file is wired up: The CONFIG_QCOM_SCM dependency have caused a number of randconfig regressions over time, and some still remain in v5.15-rc4. The fix we agreed on in the end is to make this symbol selected by any driver using it, and then building it even for non-Arm platforms with CONFIG_COMPILE_TEST. To make this work on all architectures, the drivers/firmware/Kconfig file needs to be included for all architectures to make the symbol itself visible. In a separate discussion, we found that a sound driver patch that is pending for v5.16 needs the same change to include this Kconfig file, so the easiest solution seems to have my Kconfig rework included in v5.15. Finally, the branch also includes a small unrelated build fix for NOMMU architectures" Link: https://lore.kernel.org/all/20210928153508.101208f8@canb.auug.org.au/ Link: https://lore.kernel.org/all/20210928075216.4193128-1-arnd@kernel.org/ Link: https://lore.kernel.org/all/20211007151010.333516-1-arnd@kernel.org/ * tag 'asm-generic-fixes-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: asm-generic/io.h: give stub iounmap() on !MMU same prototype as elsewhere qcom_scm: hide Kconfig symbol firmware: include drivers/firmware/Kconfig unconditionally
2021-10-07qcom_scm: hide Kconfig symbolArnd Bergmann1-1/+1
Now that SCM can be a loadable module, we have to add another dependency to avoid link failures when ipa or adreno-gpu are built-in: aarch64-linux-ld: drivers/net/ipa/ipa_main.o: in function `ipa_probe': ipa_main.c:(.text+0xfc4): undefined reference to `qcom_scm_is_available' ld.lld: error: undefined symbol: qcom_scm_is_available >>> referenced by adreno_gpu.c >>> gpu/drm/msm/adreno/adreno_gpu.o:(adreno_zap_shader_load) in archive drivers/built-in.a This can happen when CONFIG_ARCH_QCOM is disabled and we don't select QCOM_MDT_LOADER, but some other module selects QCOM_SCM. Ideally we'd use a similar dependency here to what we have for QCOM_RPROC_COMMON, but that causes dependency loops from other things selecting QCOM_SCM. This appears to be an endless problem, so try something different this time: - CONFIG_QCOM_SCM becomes a hidden symbol that nothing 'depends on' but that is simply selected by all of its users - All the stubs in include/linux/qcom_scm.h can go away - arm-smccc.h needs to provide a stub for __arm_smccc_smc() to allow compile-testing QCOM_SCM on all architectures. - To avoid a circular dependency chain involving RESET_CONTROLLER and PINCTRL_SUNXI, drop the 'select RESET_CONTROLLER' statement. According to my testing this still builds fine, and the QCOM platform selects this symbol already. Acked-by: Kalle Valo <kvalo@codeaurora.org> Acked-by: Alex Elder <elder@linaro.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-10-06mmc: meson-gx: do not use memcpy_to/fromio for dram-access-quirkNeil Armstrong1-14/+59
The memory at the end of the controller only accepts 32bit read/write accesses, but the arm64 memcpy_to/fromio implementation only uses 64bit (which will be split into two 32bit access) and 8bit leading to incomplete copies to/from this memory when the buffer is not multiple of 8bytes. Add a local copy using writel/readl accesses to make sure we use the right memory access width. The switch to memcpy_to/fromio was done because of 285133040e6c ("arm64: Import latest memcpy()/memmove() implementation"), but using memcpy worked before since it mainly used 32bit memory acceses. Fixes: 103a5348c22c ("mmc: meson-gx: use memcpy_to/fromio for dram-access-quirk") Reported-by: Christian Hewitt <christianshewitt@gmail.com> Suggested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20210928073652.434690-1-narmstrong@baylibre.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-10-06mmc: sdhci-of-at91: replace while loop with read_poll_timeoutClaudiu Beznea1-11/+5
Replace while loop with read_poll_timeout(). Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20210924082851.2132068-3-claudiu.beznea@microchip.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-10-06mmc: sdhci-of-at91: wait for calibration done before proceedClaudiu Beznea1-0/+6
Datasheet specifies that at the end of calibration the SDMMC_CALCR_EN bit will be cleared. No commands should be send before calibration is done. Fixes: dbdea70f71d67 ("mmc: sdhci-of-at91: fix CALCR register being rewritten") Fixes: 727d836a375ad ("mmc: sdhci-of-at91: add DT property to enable calibration on full reset") Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20210924082851.2132068-2-claudiu.beznea@microchip.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-09-06mmc: renesas_sdhi: fix regression with hard reset on old SDHIsWolfram Sang1-0/+2
Old SDHI instances have a default value for the reset register which keeps it in reset state by default. So, when applying a hard reset we need to manually leave the soft reset state as well. Later SDHI instances have a different default value, the one we write manually now. Fixes: b4d86f37eacb ("mmc: renesas_sdhi: do hard reset if possible") Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Reported-by: Geert Uytterhoeven <geert+renesas@glider.be> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20210826082107.47299-1-wsa+renesas@sang-engineering.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-09-06mmc: dw_mmc: Only inject fault before done/errorVincent Whitchurch1-3/+12
The fault injection function can set EVENT_DATA_ERROR but skip the setting of ->data_status to an error status if it hits just after a data over interrupt. This confuses the tasklet which can later end up triggering the WARN_ON(host->cmd || ..) in dw_mci_request_end() since dw_mci_data_complete() would return success. Prevent the fault injection function from doing this since this is not a real case, and ensure that the fault injection doesn't race with a real error either. Signed-off-by: Vincent Whitchurch <vincent.whitchurch@axis.com> Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com> Fixes: 2b8ac062f337 ("mmc: dw_mmc: Add data CRC error injection") Link: https://lore.kernel.org/r/20210825114213.7429-1-vincent.whitchurch@axis.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-09-03Merge branch 'akpm' (patches from Andrew)Linus Torvalds2-5/+1
Merge misc updates from Andrew Morton: "173 patches. Subsystems affected by this series: ia64, ocfs2, block, and mm (debug, pagecache, gup, swap, shmem, memcg, selftests, pagemap, mremap, bootmem, sparsemem, vmalloc, kasan, pagealloc, memory-failure, hugetlb, userfaultfd, vmscan, compaction, mempolicy, memblock, oom-kill, migration, ksm, percpu, vmstat, and madvise)" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (173 commits) mm/madvise: add MADV_WILLNEED to process_madvise() mm/vmstat: remove unneeded return value mm/vmstat: simplify the array size calculation mm/vmstat: correct some wrong comments mm/percpu,c: remove obsolete comments of pcpu_chunk_populated() selftests: vm: add COW time test for KSM pages selftests: vm: add KSM merging time test mm: KSM: fix data type selftests: vm: add KSM merging across nodes test selftests: vm: add KSM zero page merging test selftests: vm: add KSM unmerge test selftests: vm: add KSM merge test mm/migrate: correct kernel-doc notation mm: wire up syscall process_mrelease mm: introduce process_mrelease system call memblock: make memblock_find_in_range method private mm/mempolicy.c: use in_task() in mempolicy_slab_node() mm/mempolicy: unify the create() func for bind/interleave/prefer-many policies mm/mempolicy: advertise new MPOL_PREFERRED_MANY mm/hugetlb: add support for mempolicy MPOL_PREFERRED_MANY ...
2021-09-03mmc: mmc_spi: replace flush_kernel_dcache_page with flush_dcache_pageChristoph Hellwig1-1/+1
Pages passed to block drivers can be mapped page cache pages, so we must use flush_dcache_page here instead of the more limited flush_kernel_dcache_page that is intended for highmem pages only. Link: https://lkml.kernel.org/r/20210712060928.4161649-3-hch@lst.de Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: Alex Shi <alexs@kernel.org> Cc: Geoff Levand <geoff@infradead.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Guo Ren <guoren@kernel.org> Cc: Helge Deller <deller@gmx.de> Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com> Cc: Nick Hu <nickhu@andestech.com> Cc: Paul Cercueil <paul@crapouillou.net> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Ulf Hansson <ulf.hansson@linaro.org> Cc: Vincent Chen <deanbo422@gmail.com> Cc: Yoshinori Sato <ysato@users.osdn.me> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-03mmc: JZ4740: remove the flush_kernel_dcache_page call in jz4740_mmc_read_dataChristoph Hellwig1-4/+0
Patch series "_kernel_dcache_page fixes and removal". While looking to convert the block layer away from kmap_atomic towards kmap_local_page and prefeably the helpers that abstract it away I noticed that a few block drivers directly or implicitly call flush_kernel_dcache_page before kunmapping a page that has been written to. flush_kernel_dcache_page is documented to to be used in such cases, but flush_dcache_page is actually required when the page could be in the page cache and mapped to userspace, which is pretty much always the case when kmapping an arbitrary page. Unfortunately the documentation doesn't exactly make that clear, which lead to this misused. And it turns out that only the copy_strings / copy_string_kernel in the exec code were actually correct users of flush_kernel_dcache_page, which is why I think we should just remove it and eat the very minor overhead in exec rather than confusing poor driver writers. This patch (of 6): MIPS now implements flush_kernel_dcache_page (as an alias to flush_dcache_page). Link: https://lkml.kernel.org/r/20210712060928.4161649-1-hch@lst.de Link: https://lkml.kernel.org/r/20210712060928.4161649-2-hch@lst.de Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Guo Ren <guoren@kernel.org> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Nick Hu <nickhu@andestech.com> Cc: Greentime Hu <green.hu@gmail.com> Cc: Vincent Chen <deanbo422@gmail.com> Cc: Helge Deller <deller@gmx.de> Cc: Yoshinori Sato <ysato@users.osdn.me> Cc: Rich Felker <dalias@libc.org> Cc: Geoff Levand <geoff@infradead.org> Cc: Paul Cercueil <paul@crapouillou.net> Cc: Ulf Hansson <ulf.hansson@linaro.org> Cc: Alex Shi <alexs@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-01Merge tag 'tty-5.15-rc1' of ↵Linus Torvalds1-6/+6
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty / serial updates from Greg KH: "Here is the "big" set of tty/serial driver patches for 5.15-rc1 Nothing major in here at all, just some driver updates and more cleanups on old tty apis and code that needed it that includes: - tty.h cleanup of things that didn't belong in it - other tty cleanups by Jiri - driver cleanups - rs485 support added to amba-pl011 driver - dts updates - stm32 serial driver updates - other minor fixes and driver updates All have been in linux-next for a while with no reported problems" * tag 'tty-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (83 commits) tty: serial: uartlite: Use read_poll_timeout for a polling loop tty: serial: uartlite: Use constants in early_uartlite_putc tty: Fix data race between tiocsti() and flush_to_ldisc() serial: vt8500: Use of_device_get_match_data serial: tegra: Use of_device_get_match_data serial: 8250_ingenic: Use of_device_get_match_data tty: serial: linflexuart: Remove redundant check to simplify the code tty: serial: fsl_lpuart: do software reset for imx7ulp and imx8qxp tty: serial: fsl_lpuart: enable two stop bits for lpuart32 tty: serial: fsl_lpuart: fix the wrong mapbase value mxser: use semi-colons instead of commas tty: moxa: use semi-colons instead of commas tty: serial: fsl_lpuart: check dma_tx_in_progress in tx dma callback tty: replace in_irq() with in_hardirq() serial: sh-sci: fix break handling for sysrq serial: stm32: use devm_platform_get_and_ioremap_resource() serial: stm32: use the defined variable to simplify code Revert "arm pl011 serial: support multi-irq request" tty: serial: samsung: Add Exynos850 SoC data tty: serial: samsung: Fix driver data macros style ...
2021-09-01Merge tag 'driver-core-5.15-rc1' of ↵Linus Torvalds2-6/+2
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core updates from Greg KH: "Here is the big set of driver core patches for 5.15-rc1. These do change a number of different things across different subsystems, and because of that, there were 2 stable tags created that might have already come into your tree from different pulls that did the following - changed the bus remove callback to return void - sysfs iomem_get_mapping rework Other than those two things, there's only a few small things in here: - kernfs performance improvements for huge numbers of sysfs users at once - tiny api cleanups - other minor changes All of these have been in linux-next for a while with no reported problems, other than the before-mentioned merge issue" * tag 'driver-core-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (33 commits) MAINTAINERS: Add dri-devel for component.[hc] driver core: platform: Remove platform_device_add_properties() ARM: tegra: paz00: Handle device properties with software node API bitmap: extend comment to bitmap_print_bitmask/list_to_buf drivers/base/node.c: use bin_attribute to break the size limitation of cpumap ABI topology: use bin_attribute to break the size limitation of cpumap ABI lib: test_bitmap: add bitmap_print_bitmask/list_to_buf test cases cpumask: introduce cpumap_print_list/bitmask_to_buf to support large bitmask and list sysfs: Rename struct bin_attribute member to f_mapping sysfs: Invoke iomem_get_mapping() from the sysfs open callback debugfs: Return error during {full/open}_proxy_open() on rmmod zorro: Drop useless (and hardly used) .driver member in struct zorro_dev zorro: Simplify remove callback sh: superhyway: Simplify check in remove callback nubus: Simplify check in remove callback nubus: Make struct nubus_driver::remove return void kernfs: dont call d_splice_alias() under kernfs node lock kernfs: use i_lock to protect concurrent inode updates kernfs: switch kernfs to use an rwsem kernfs: use VFS negative dentry caching ...
2021-09-01Merge tag 'mmc-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmcLinus Torvalds31-266/+529
Pull MMC and MEMSTICK updates from Ulf Hansson: "MMC core: - Return a proper response in case of an ioctl error - Issue HPI to interrupt BKOPS for eMMC if it timed out - Avoid hogging the CPU while polling for busy - Extend sd8787 pwrseq to support the wilc1000 SDIO - Remove a couple of confusing warning messages - Clarify comment for ->card_busy() host ops MMC host: - dw_mmc: Add data CRC error injection - mmci: De-assert reset during ->probe() - rtsx_pci: Fix long reads when clock is pre-scaled - sdhci: Correct the tuning command handle for PIO mode - sdhci-esdhc-imx: Improve support for auto tuning - sdhci-msm: Add support for the sc7280 - sdhci-of-arasan: Don't auto tune for DDR50 mode for ZynqMP - sdhci-of-arasan: Enable support for auto cmd12 - sdhci-of-arasan: Use 19MHz for SD default speed for ZynqMP for level shifter - usdhi6rol0: Implement the ->card_busy() host ops MEMSTICK: - A couple of minor cleanups" * tag 'mmc-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (52 commits) mmc: queue: Remove unused parameters(request_queue) mmc: pwrseq: sd8787: fix compilation warning mmc: core: Return correct emmc response in case of ioctl error mmc: sdhci-esdhc-imx: Select the correct mode for auto tuning mmc: sdhci-esdhc-imx: Remove redundant code for manual tuning mmc: core: Issue HPI in case the BKOPS timed out mmc: queue: Match the data type of max_segments mmc: switch from 'pci_' to 'dma_' API memstick: switch from 'pci_' to 'dma_' API memstick: r592: Change the name of the 'pci_driver' structure to be consistent mmc: pwrseq: add wilc1000_sdio dependency for pwrseq_sd8787 mmc: pwrseq: sd8787: add support for wilc1000 dt-bindings: mmc: Extend pwrseq-sd8787 binding for wilc1000 dt-bindings: mmc: fsl-imx-esdhc: change the pinctrl-names rule dt-bindings: mmc: fsl-imx-esdhc: add a new compatible string dt-bindings: mmc: renesas,sdhi: Document RZ/G2L bindings dt-bindings: mmc: renesas,sdhi: Fix dtbs-check warning mmc: core: Update ->card_busy() callback comment mmc: usdhi6rol0: Implement card_busy function mmc: sdhci: Correct the tuning command handle for PIO mode ...
2021-08-31Merge tag 'for-5.15/block-2021-08-30' of git://git.kernel.dk/linux-blockLinus Torvalds5-85/+127
Pull block updates from Jens Axboe: "Nothing major in here - lots of good cleanups and tech debt handling, which is also evident in the diffstats. In particular: - Add disk sequence numbers (Matteo) - Discard merge fix (Ming) - Relax disk zoned reporting restrictions (Niklas) - Bio error handling zoned leak fix (Pavel) - Start of proper add_disk() error handling (Luis, Christoph) - blk crypto fix (Eric) - Non-standard GPT location support (Dmitry) - IO priority improvements and cleanups (Damien)o - blk-throtl improvements (Chunguang) - diskstats_show() stack reduction (Abd-Alrhman) - Loop scheduler selection (Bart) - Switch block layer to use kmap_local_page() (Christoph) - Remove obsolete disk_name helper (Christoph) - block_device refcounting improvements (Christoph) - Ensure gendisk always has a request queue reference (Christoph) - Misc fixes/cleanups (Shaokun, Oliver, Guoqing)" * tag 'for-5.15/block-2021-08-30' of git://git.kernel.dk/linux-block: (129 commits) sg: pass the device name to blk_trace_setup block, bfq: cleanup the repeated declaration blk-crypto: fix check for too-large dun_bytes blk-zoned: allow BLKREPORTZONE without CAP_SYS_ADMIN blk-zoned: allow zone management send operations without CAP_SYS_ADMIN block: mark blkdev_fsync static block: refine the disk_live check in del_gendisk mmc: sdhci-tegra: Enable MMC_CAP2_ALT_GPT_TEGRA mmc: block: Support alternative_gpt_sector() operation partitions/efi: Support non-standard GPT location block: Add alternative_gpt_sector() operation bio: fix page leak bio_add_hw_page failure block: remove CONFIG_DEBUG_BLOCK_EXT_DEVT block: remove a pointless call to MINOR() in device_add_disk null_blk: add error handling support for add_disk() virtio_blk: add error handling support for add_disk() block: add error handling for device_add_disk / add_disk block: return errors from disk_alloc_events block: return errors from blk_integrity_add block: call blk_register_queue earlier in device_add_disk ...
2021-08-27Merge branch 'fixes' into nextUlf Hansson1-2/+1
2021-08-27Revert "mmc: sdhci-iproc: Set SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN on BCM2711"Ulf Hansson1-2/+1
This reverts commit 419dd626e357e89fc9c4e3863592c8b38cfe1571. It turned out that the change from the reverted commit breaks the ACPI based rpi's because it causes the 100Mhz max clock to be overridden to the return from sdhci_iproc_get_max_clock(), which is 0 because there isn't a OF/DT based clock device. Reported-by: Jeremy Linton <jeremy.linton@arm.com> Fixes: 419dd626e357 ("mmc: sdhci-iproc: Set SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN on BCM2711") Acked-by: Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-08-25mmc: queue: Remove unused parameters(request_queue)ChanWoo Lee1-24/+6
In function mmc_exit_request, the request_queue structure(*q) is not used. I remove the unnecessary code related to the request_queue structure. Signed-off-by: ChanWoo Lee <cw9316.lee@samsung.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Link: https://lore.kernel.org/r/20210825074601.8881-1-cw9316.lee@samsung.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-08-25mmc: pwrseq: sd8787: fix compilation warningClaudiu Beznea1-3/+6
Fixed compilation warning "cast from pointer to integer of different size [-Wpointer-to-int-cast]" Fixes: b2832b96fcf5 ("mmc: pwrseq: sd8787: add support for wilc1000") Reported-by: kernel test robot <lkp@intel.com> Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20210825081931.598934-1-claudiu.beznea@microchip.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-08-25mmc: core: Return correct emmc response in case of ioctl errorNishad Kamdar1-2/+1
When a read/write command is sent via ioctl to the kernel, and the command fails, the actual error response of the emmc is not sent to the user. IOCTL read/write tests are carried out using commands 17 (Single BLock Read), 24 (Single Block Write), 18 (Multi Block Read), 25 (Multi Block Write) The tests are carried out on a 64Gb emmc device. All of these tests try to access an "out of range" sector address (0x09B2FFFF). It is seen that without the patch the response received by the user is not OUT_OF_RANGE error (R1 response 31st bit is not set) as per JEDEC specification. After applying the patch proper response is seen. This is because the function returns without copying the response to the user in case of failure. This patch fixes the issue. Hence, this memcpy is required whether we get an error response or not. Therefor it is moved up from the current position up to immediately after we have called mmc_wait_for_req(). The test code and the output of only the CMD17 is included in the commit to limit the message length. CMD17 (Test Code Snippet): ========================== printf("Forming CMD%d\n", opt_idx); /* single block read */ cmd.blksz = 512; cmd.blocks = 1; cmd.write_flag = 0; cmd.opcode = 17; //cmd.arg = atoi(argv[3]); cmd.arg = 0x09B2FFFF; /* Expecting response R1B */ cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_ADTC; memset(data, 0, sizeof(__u8) * 512); mmc_ioc_cmd_set_data(cmd, data); printf("Sending CMD%d: ARG[0x%08x]\n", opt_idx, cmd.arg); if(ioctl(fd, MMC_IOC_CMD, &cmd)) perror("Error"); printf("\nResponse: %08x\n", cmd.response[0]); CMD17 (Output without patch): ============================= test@test-LIVA-Z:~$ sudo ./mmc cmd_test /dev/mmcblk0 17 Entering the do_mmc_commands:Device: /dev/mmcblk0 nargs:4 Entering the do_mmc_commands:Device: /dev/mmcblk0 options[17, 0x09B2FFF] Forming CMD17 Sending CMD17: ARG[0x09b2ffff] Error: Connection timed out Response: 00000000 (Incorrect response) CMD17 (Output with patch): ========================== test@test-LIVA-Z:~$ sudo ./mmc cmd_test /dev/mmcblk0 17 [sudo] password for test: Entering the do_mmc_commands:Device: /dev/mmcblk0 nargs:4 Entering the do_mmc_commands:Device: /dev/mmcblk0 options[17, 09B2FFFF] Forming CMD17 Sending CMD17: ARG[0x09b2ffff] Error: Connection timed out Response: 80000900 (Correct OUT_OF_ERROR response as per JEDEC specification) Signed-off-by: Nishad Kamdar <nishadkamdar@gmail.com> Reviewed-by: Avri Altman <avri.altman@wdc.com> Link: https://lore.kernel.org/r/20210824191726.8296-1-nishadkamdar@gmail.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-08-25mmc: sdhci-esdhc-imx: Select the correct mode for auto tuningHaibo Chen1-0/+33
USDHC hardware auto tuning circuit support check 1/4/8 data lines and cmd line. Out of reset uSDHC, it default select check 4 data lines and do not check cmd line. This is incorrect if we use 8 data lines. So need to config the auto tuning mode according to current bus width. Signed-off-by: Haibo Chen <haibo.chen@nxp.com> Link: https://lore.kernel.org/r/1629285415-7495-2-git-send-email-haibo.chen@nxp.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-08-25mmc: sdhci-esdhc-imx: Remove redundant code for manual tuningHaibo Chen1-11/+1
For manual tuning method, already call esdhc_prepare_tuning() config the necessary registers, so remove the redundant code in esdhc_writew_le() for SDHCI_HOST_CONTROL2. Signed-off-by: Haibo Chen <haibo.chen@nxp.com> Link: https://lore.kernel.org/r/1629285415-7495-1-git-send-email-haibo.chen@nxp.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-08-24mmc: sdhci-tegra: Enable MMC_CAP2_ALT_GPT_TEGRADmitry Osipenko1-0/+9
Tegra20/30/114/124 Android devices place GPT at a non-standard location. Enable GPT entry scanning at that location. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Acked-by: Thierry Reding <treding@nvidia.com> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Link: https://lore.kernel.org/r/20210820004536.15791-5-digetx@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-08-24mmc: block: Support alternative_gpt_sector() operationDmitry Osipenko4-0/+60
Support generic alternative_gpt_sector() block device operation. It calculates location of GPT entry for eMMC of NVIDIA Tegra Android devices. Add new MMC_CAP2_ALT_GPT_TEGRA flag that enables scanning of alternative GPT sector and add raw_boot_mult field to mmc_ext_csd which allows to get size of the boot partitions that is needed for the calculation. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Link: https://lore.kernel.org/r/20210820004536.15791-4-digetx@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-08-24mmc: core: Issue HPI in case the BKOPS timed outBean Huo1-2/+9
If the BKOPS timed out, the card is probably still busy in the R1_STATE_PRG. Rather than continue as nothing has happened and hitting and error for the next command being sent, let's try to abort the running BKOPS by sending a HPI command to get back into R1_STATE_TRAN. Signed-off-by: Bean Huo <beanhuo@micron.com> Link: https://lore.kernel.org/r/20210817224208.153652-2-huobean@gmail.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-08-24mmc: queue: Match the data type of max_segmentsChanWoo Lee1-2/+2
Each function has a different data type for max_segments, Modify to match unsigned short(host->max_segs). * unsigned short max_segs; /* see blk_queue_max_segments */ 1) Return type : unsigned int static unsigned int mmc_get_max_segments(struct mmc_host *host) { return host->can_dma_map_merge ? MMC_DMA_MAP_MERGE_SEGMENTS : host->max_segs; } 2) Parameter type : int mmc_alloc_sg(mmc_get_max_segments(host), gfp); -> static struct scatterlist *mmc_alloc_sg(int sg_len, gfp_t gfp) 3) Parameter type : unsigned short blk_queue_max_segments(mq->queue, mmc_get_max_segments(host)); -> void blk_queue_max_segments(struct request_queue *q, unsigned short max_segments) Signed-off-by: ChanWoo Lee <cw9316.lee@samsung.com> Acked-by: Coly Li <colyli@suse.de> Link: https://lore.kernel.org/r/20210824073934.19727-1-cw9316.lee@samsung.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-08-24mmc: switch from 'pci_' to 'dma_' APIChristophe JAILLET2-10/+10
The wrappers in include/linux/pci-dma-compat.h should go away. The patch has been generated with the coccinelle script below. It has been compile tested. @@ @@ - PCI_DMA_BIDIRECTIONAL + DMA_BIDIRECTIONAL @@ @@ - PCI_DMA_TODEVICE + DMA_TO_DEVICE @@ @@ - PCI_DMA_FROMDEVICE + DMA_FROM_DEVICE @@ @@ - PCI_DMA_NONE + DMA_NONE @@ expression e1, e2, e3; @@ - pci_alloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3; @@ - pci_zalloc_consistent(e1, e2, e3) + dma_alloc_coherent(&e1->dev, e2, e3, GFP_) @@ expression e1, e2, e3, e4; @@ - pci_free_consistent(e1, e2, e3, e4) + dma_free_coherent(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_single(e1, e2, e3, e4) + dma_map_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_single(e1, e2, e3, e4) + dma_unmap_single(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4, e5; @@ - pci_map_page(e1, e2, e3, e4, e5) + dma_map_page(&e1->dev, e2, e3, e4, e5) @@ expression e1, e2, e3, e4; @@ - pci_unmap_page(e1, e2, e3, e4) + dma_unmap_page(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_map_sg(e1, e2, e3, e4) + dma_map_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_unmap_sg(e1, e2, e3, e4) + dma_unmap_sg(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_cpu(e1, e2, e3, e4) + dma_sync_single_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_single_for_device(e1, e2, e3, e4) + dma_sync_single_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_cpu(e1, e2, e3, e4) + dma_sync_sg_for_cpu(&e1->dev, e2, e3, e4) @@ expression e1, e2, e3, e4; @@ - pci_dma_sync_sg_for_device(e1, e2, e3, e4) + dma_sync_sg_for_device(&e1->dev, e2, e3, e4) @@ expression e1, e2; @@ - pci_dma_mapping_error(e1, e2) + dma_mapping_error(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_dma_mask(e1, e2) + dma_set_mask(&e1->dev, e2) @@ expression e1, e2; @@ - pci_set_consistent_dma_mask(e1, e2) + dma_set_coherent_mask(&e1->dev, e2) Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/b617f284e2ab8b6b48fff150eba1638641646edd.1629640046.git.christophe.jaillet@wanadoo.fr Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-08-24mmc: pwrseq: add wilc1000_sdio dependency for pwrseq_sd8787Claudiu Beznea1-1/+1
pwseq_sd8787 could also be used with wilc1000_sdio driver. Add a dependency for this. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20210820092803.78523-4-claudiu.beznea@microchip.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-08-24mmc: pwrseq: sd8787: add support for wilc1000Claudiu Beznea1-2/+9
Add new compatible for wilc1000 devices and specify the delay in .data member of struct of_device_id. WILC1000, WILC3000 devices needs a minimum of 5ms delay b/w reset and power lines. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/20210820092803.78523-3-claudiu.beznea@microchip.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-08-24mmc: usdhi6rol0: Implement card_busy functionMårten Lindahl1-0/+10
When switching card voltage to UHS voltage the mmc framework tries to check the card busy signal, meaning the card pulling DAT0 line low, before the switch is made. Drivers that does not implement the card_busy function will manage to do the switch anyway, but the framework will print a warning about not being able to verify the voltage signal. Implement card_busy function. Signed-off-by: Mårten Lindahl <marten.lindahl@axis.com> Link: https://lore.kernel.org/r/20210816142314.1168-1-marten.lindahl@axis.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-08-24mmc: sdhci: Correct the tuning command handle for PIO modeHaibo Chen1-2/+8
If sdhci use PIO mode, and use mmc_send_tuning() to send the tuning command, system will stuck because of the storm irq of sdhci. For PIO mode, use mmc_send_tuning(), it will trigger buffer_read_ready interrupt and data transfer complete interrupt. In current code logic, it will directly return in sdhci_data_irq, can not call the sdhci_transfer_pio(). So the buffer_read_ready interrupt storm happen. So for standard tuning method, need to exclude this case. Signed-off-by: Haibo Chen <haibo.chen@nxp.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Link: https://lore.kernel.org/r/1628858041-1911-1-git-send-email-haibo.chen@nxp.com [Ulf: Dropped redundant parenthesis in an expression] Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-08-24mmc: renesas_sdhi: Refactor renesas_sdhi_probe()Yoshihiro Shimoda4-96/+141
Refactor renesas_sdhi_probe() to avoid increasing numbers of sdhi_quirks_match[] entry when we add other stable SoCs like r8a779m*. Note that the sdhi_quirks_match[] is only needed on renesas_sdhi_internal_dmac.c so that of_data of renesas_sdhi_sys_dmac.c keeps as-is. Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://lore.kernel.org/r/20210729103234.480743-1-yoshihiro.shimoda.uh@renesas.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-08-24mmc: moxart: Fix issue with uninitialized dma_slave_configTony Lindgren1-0/+1
Depending on the DMA driver being used, the struct dma_slave_config may need to be initialized to zero for the unused data. For example, we have three DMA drivers using src_port_window_size and dst_port_window_size. If these are left uninitialized, it can cause DMA failures. For moxart, this is probably not currently an issue but is still good to fix though. Fixes: 1b66e94e6b99 ("mmc: moxart: Add MOXA ART SD/MMC driver") Cc: Jonas Jensen <jonas.jensen@gmail.com> Cc: Vinod Koul <vkoul@kernel.org> Cc: Peter Ujfalusi <peter.ujfalusi@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Link: https://lore.kernel.org/r/20210810081644.19353-3-tony@atomide.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-08-24mmc: dw_mmc: Fix issue with uninitialized dma_slave_configTony Lindgren1-0/+1
Depending on the DMA driver being used, the struct dma_slave_config may need to be initialized to zero for the unused data. For example, we have three DMA drivers using src_port_window_size and dst_port_window_size. If these are left uninitialized, it can cause DMA failures. For dw_mmc, this is probably not currently an issue but is still good to fix though. Fixes: 3fc7eaef44db ("mmc: dw_mmc: Add external dma interface support") Cc: Shawn Lin <shawn.lin@rock-chips.com> Cc: Jaehoon Chung <jh80.chung@samsung.com> Cc: Peter Ujfalusi <peter.ujfalusi@gmail.com> Cc: Vinod Koul <vkoul@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com> Link: https://lore.kernel.org/r/20210810081644.19353-2-tony@atomide.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-08-24mmc: sdhci: Fix issue with uninitialized dma_slave_configTony Lindgren1-0/+1
Depending on the DMA driver being used, the struct dma_slave_config may need to be initialized to zero for the unused data. For example, we have three DMA drivers using src_port_window_size and dst_port_window_size. If these are left uninitialized, it can cause DMA failures at least if external TI SDMA is ever configured for sdhci. For other external DMA cases, this is probably not currently an issue but is still good to fix though. Fixes: 18e762e3b7a7 ("mmc: sdhci: add support for using external DMA devices") Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Chunyan Zhang <zhang.chunyan@linaro.org> Cc: Faiz Abbas <faiz_abbas@ti.com> Cc: Peter Ujfalusi <peter.ujfalusi@gmail.com> Cc: Vinod Koul <vkoul@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Reviewed-by: Peter Ujfalusi <peter.ujfalusi@gmail.com> Link: https://lore.kernel.org/r/20210810081644.19353-1-tony@atomide.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-22 05:28:08 +0300