summaryrefslogtreecommitdiff
path: root/drivers/mmc
AgeCommit message (Collapse)AuthorFilesLines
2006-02-16[MMC] mmci: allow small data transfersRussell King1-0/+7
If a data transfer is small (less than a FIFO size) we would hang waiting for the data to be read due to the PIO interrupt not occuring. We allowed for this in our PIO interrupt handler, but not when setting up a data transfer. Apply the "fix" when setting up a data transfer as well. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-02-09[MMC] Remove extra character in AU1XXX MMC Kconfig entryJordan Crouse1-1/+1
An obvious vi fat finger on my part. Signed-off-by: Jordan Crouse <jordan.crouse@amd.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-02-02[MMC] Add MMC command type flagsRussell King6-63/+60
Some hosts need to know the command type, so pass it via a set of flags in cmd->flags. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-15Merge master.kernel.org:/home/rmk/linux-2.6-mmcLinus Torvalds1-2/+3
2006-01-14[MMC] mmc_blk_probe() warning fixAndrew Morton1-2/+3
drivers/mmc/mmc_block.c: In function `mmc_blk_probe': drivers/mmc/mmc_block.c:467: warning: long unsigned int format, different type arg (arg 5) We don't know what size sector_t is - cast it. Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-13[PATCH] Add mmc_bus_type probe and remove methodsRussell King1-14/+12
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-12[MMC+MFD] Convert mmc to mutexesArjan van de Ven1-5/+6
convert mfd and mmc to mutexes Signed-off-by: Arjan van de Ven <arjan@infradead.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-10Merge master.kernel.org:/home/rmk/linux-2.6-mmcLinus Torvalds3-264/+278
2006-01-10[MMC] Add DATA_MULTI flagRussell King1-1/+7
Some hosts need to know that a transfer will be multi-block. Add a data flag to indicate multiple data block transfers. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-09[PATCH] Add block_device_operations.getgeo block device methodChristoph Hellwig1-19/+6
HDIO_GETGEO is implemented in most block drivers, and all of them have to duplicate the code to copy the structure to userspace, as well as getting the start sector. This patch moves that to common code [1] and adds a ->getgeo method to fill out the raw kernel hd_geometry structure. For many drivers this means ->ioctl can go away now. [1] the s390 block drivers are odd in this respect. xpram sets ->start to 4 always which seems more than odd, and the dasd driver shifts the start offset around, probably because of it's non-standard sector size. Signed-off-by: Christoph Hellwig <hch@lst.de> Cc: Jens Axboe <axboe@suse.de> Cc: <mike.miller@hp.com> Cc: Jeff Dike <jdike@addtoit.com> Cc: Paolo Giarrusso <blaisorblade@yahoo.it> Cc: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl> Cc: Neil Brown <neilb@cse.unsw.edu.au> Cc: Markus Lidel <Markus.Lidel@shadowconnect.com> Cc: Russell King <rmk@arm.linux.org.uk> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: James Bottomley <James.Bottomley@steeleye.com> Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-08[MMC] Lindent wbsd driverPierre Ossman1-252/+185
Fix the coding style in the wbsd driver once and for all. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-08[MMC] Support MMC version 4 cardsPierre Ossman1-0/+1
Version 4 of the MMC specification increased the version number of the CID structure. None of the fields changed though so the only required change is adding '4' to the approved list. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-08[MMC] wbsd pnp suspendPierre Ossman1-16/+90
Allow the wbsd driver to use the new suspend/resume functions added to the PnP layer. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-07Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds1-10/+3
2006-01-07Merge master.kernel.org:/home/rmk/linux-2.6-mmcLinus Torvalds5-75/+158
2006-01-07[ARM] Move asm/hardware/clock.h to linux/clk.hRussell King1-1/+1
This is needs to be visible to other architectures using the AMBA bus and peripherals. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-07Merge with Linus' kernel.Russell King2-4/+4
2006-01-07[ARM] Move AMBA include files to include/linux/amba/Russell King1-1/+1
Since the ARM AMBA bus is used on MIPS as well as ARM, we need to make the bus available for other architectures to use. Move the AMBA include files from include/asm-arm/hardware/ to include/linux/amba/ Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-06[BLOCK] add @uptodate to end_that_request_last() and @error to rq_end_io_fn()Tejun Heo1-2/+2
add @uptodate argument to end_that_request_last() and @error to rq_end_io_fn(). there's no generic way to pass error code to request completion function, making generic error handling of non-fs request difficult (rq->errors is driver-specific and each driver uses it differently). this patch adds @uptodate to end_that_request_last() and @error to rq_end_io_fn(). for fs requests, this doesn't really matter, so just using the same uptodate argument used in the last call to end_that_request_first() should suffice. imho, this can also help the generic command-carrying request jens is working on. Signed-off-by: tejun heo <htejun@gmail.com> Signed-Off-By: Jens Axboe <axboe@suse.de>
2006-01-05[MMC] mmci: kunmap_atomic() unmaps virtual address, not pageEvgeniy Polyakov2-3/+3
Signed-off-by: Evgeniy Polyakov <johnpol@2ka.mipt.ru> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-05[PATCH] driver core: replace "hotplug" by "uevent"Kay Sievers1-2/+2
Leave the overloaded "hotplug" word to susbsystems which are handling real devices. The driver core does not "plug" anything, it just exports the state to userspace and generates events. Signed-off-by: Kay Sievers <kay.sievers@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-01-04[MMC] mmci: add data cache coherencyRussell King1-0/+15
Since MMCI currently uses PIO to read data, we have to take steps to ensure data cache coherency on aliasing CPU caches. Add the necessary flush_dcache_page() calls. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-04[MMC] wbsd: convert to the new platfrom device interfaceDmitry Torokhov1-4/+14
platform_device_register_simple() is going away, switch to using platfrom_device_alloc() + platform_device_add(). Also make sure that wbsd_driver gets unregistered when wbsd_init fails. Signed-off-by: Dmitry Torokhov <dtor@mail.ru> Acked-by: Pierre Ossman <drzeus@drzeus.cx>
2006-01-04[MMC] wbsd: make use of ARRAY_SIZE() macroDmitry Torokhov1-6/+3
Signed-off-by: Dmitry Torokhov <dtor@mail.ru> Acked-by: Pierre Ossman <drzeus@drzeus.cx>
2006-01-04[MMC] Improve MMC card block size selectionRussell King2-62/+123
Select a block size for IO based on the read and write block size combinations, and whether the card supports partial block reads and/or partial block writes. If we are able to satisfy block reads but not block writes, mark the device read only. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-01-03[ARM] Remove clk_use()/clk_unuse()Russell King1-8/+1
It seems that clk_use() and clk_unuse() are additional complexity which isn't required anymore. Remove them from the clock framework to avoid the additional confusion which they cause, and update all ARM machine types except for OMAP. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-12-23[MMC] Set correct capacity for 1024-byte block cardsRussell King1-5/+9
We were passing set_capacity() the capacity we calculated in terms of the number of blocks on the card, which happened to be the right units for 512-byte block cards. However, with 1024-byte block cards, we end up setting the capacity to half the number of blocks. Fix this by shifting by the appropriate amount. Thanks to Todd Blumer for pointing this out. Use get_capacity() to report the card capacity, rather than recalculating it from the CSD information. Finally, use our chosen IO block size for the SET_BLOCKLEN command rather than the CSD read block size. Currently these are equivalent, but will not be in the future. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-12-14[MMC] Explain the internals of mmc_power_up()Russell King1-1/+9
It seems that people get confused about what is happening in mmc_power_up(). Add a comment to make it clear why we have a two stage process. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-12-05[MMC] Proper check of SCR error codePierre Ossman1-2/+3
The routine reading the SCR wasn't paying proper attention to the error codes returned from the driver. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-11-29[MMC] Fix protocol errorsPierre Ossman1-1/+1
A review against MMC/SD specifications found some errors in the current implementation. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-11-12[MMC] mmci doesn't need asm/irq.hRussell King1-1/+0
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-11-11Merge master.kernel.org:/home/rmk/linux-2.6-drvmodelLinus Torvalds2-34/+35
2005-11-10[MMC] wbsd version 1.5Pierre Ossman1-1/+1
New kernel, new patches, new version. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-11-10[MMC] Add MODULE_AUTHOR to wbsdPierre Ossman1-0/+1
'cause I'm in it for the chicks. ;) Signed-off-by: Pierre Ossman <drzeus@drzeus.cx> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-11-10[MMC] Use __devexit_p in wbsdPierre Ossman1-2/+2
wbsd_*_remove() is declared as __devexit but __devexit_p isn't used when taking their addresses. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-11-10[DRIVER MODEL] Convert platform drivers to use struct platform_driverRussell King2-34/+35
This allows us to eliminate the casts in the drivers, and eventually remove the use of the device_driver function pointer methods for platform device drivers. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-11-08Merge master.kernel.org:/home/rmk/linux-2.6-mmcLinus Torvalds1-1/+1
2005-11-08[ARM] 3120/1: Fix MMC/SD card driver resume deadlockUli Luckas1-1/+1
Patch from Uli Luckas This is a simplification of patch 3116/1 as sugested by Russell King. Signed-off-by: Uli Luckas <u.luckas@road-gmbh.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-11-07[PATCH] kfree cleanup: misc remaining driversJesper Juhl1-2/+1
This is the remaining misc drivers/ part of the big kfree cleanup patch. Remove pointless checks for NULL prior to calling kfree() in misc files in drivers/. Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com> Acked-by: Aristeu Sergio Rozanski Filho <aris@cathedrallabs.org> Acked-by: Roland Dreier <rolandd@cisco.com> Acked-by: Pierre Ossman <drzeus@drzeus.cx> Acked-by: Jean Delvare <khali@linux-fr.org> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Acked-by: Len Brown <len.brown@intel.com> Acked-by: "Antonino A. Daplas" <adaplas@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-05[MMC] Use controller id instead of driver name for printksPierre Ossman1-5/+6
The printks that aren't for debugging should use the name of the controller, not the driver name. Multiple MMC controllers aren't that common today, but this is the right way to do things. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-11-05[MMC] Fix chip config in wbsdPierre Ossman1-2/+2
There is a broken if clause in the wbsd driver that can cause the driver to try and configure the chip even though none is found. This results in i/o on invalid ports. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-11-04[MMC] Response to write commands is R1 nor R1bRussell King1-1/+0
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-10-31Merge master.kernel.org:/home/rmk/linux-2.6-drvmodelLinus Torvalds2-2/+2
Manual #include fixups for clashes - there may be some unnecessary
2005-10-30[MMC] Use command class to determine read-only statusPierre Ossman1-2/+8
If a card doesn't support the "write block" command class then any attempts to open the device should reflect this by denying write access. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-10-30[MMC] pxamci doesn't need to include asm/irq.hRussell King1-1/+0
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-10-29Au1[12]00 mmc driver. Only tested on the Au1200 at this point thoughPete Popov4-0/+1132
it should work on the Au1100 as well. Updated defconfig to include driver. Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-10-29Create platform_device.h to contain all the platform device details.Russell King2-2/+2
Convert everyone who uses platform_bus_type to include linux/platform_device.h. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-10-29[MMC] wbsd suspend supportPierre Ossman1-28/+91
Proper handling of suspend/resume in the wbsd driver. Signed-off-by: Pierre Ossman <drzeus@drzeus.cx> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-10-28Merge ../bleed-2.6Greg KH1-0/+1
2005-10-28[PATCH] DRIVER MODEL: Get rid of the obsolete tri-level suspend/resume callbacksRussell King2-6/+6
In PM v1, all devices were called at SUSPEND_DISABLE level. Then all devices were called at SUSPEND_SAVE_STATE level, and finally SUSPEND_POWER_DOWN level. However, with PM v2, to maintain compatibility for platform devices, I arranged for the PM v2 suspend/resume callbacks to call the old PM v1 suspend/resume callbacks three times with each level in order so that existing drivers continued to work. Since this is obsolete infrastructure which is no longer necessary, we can remove it. Here's an (untested) patch to do exactly that. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-05 06:53:01 +0300