summaryrefslogtreecommitdiff
path: root/drivers/mmc
AgeCommit message (Collapse)AuthorFilesLines
2023-01-02mmc: sunxi-mmc: Fix clock refcount imbalance during unbindSamuel Holland1-3/+5
If the controller is suspended by runtime PM, the clock is already disabled, so do not try to disable it again during removal. Use pm_runtime_disable() to flush any pending runtime PM transitions. Fixes: 9a8e1e8cc2c0 ("mmc: sunxi: Add runtime_pm support") Signed-off-by: Samuel Holland <samuel@sholland.org> Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20220810022509.43743-1-samuel@sholland.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2023-01-02mmc: sdhci-esdhc-imx: correct the tuning start tap and step settingHaibo Chen1-7/+15
Current code logic may be impacted by the setting of ROM/Bootloader, so unmask these bits first, then setting these bits accordingly. Fixes: 2b16cf326b70 ("mmc: sdhci-esdhc-imx: move tuning static configuration into hwinit function") Signed-off-by: Haibo Chen <haibo.chen@nxp.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20221207112315.1812222-1-haibo.chen@nxp.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-12-14Merge tag 'mmc-v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmcLinus Torvalds59-370/+1611
Pull MMC and MEMSTICK updates from Ulf Hansson: "MMC core: - A few minor improvements and cleanups MMC host: - Remove some redundant calls to local_irq_{save,restore}() - Replace kmap_atomic() with kmap_local_page() - Take return values from mmc_add_host() into account - dw_mmc-pltfm: Add support to configure clk-phase for socfpga - hsq: Minimize latency by using a fifo to dispatch requests - litex_mmc: Fixup corner case for polling mode - mtk-sd: Add inline crypto engine clock control - mtk-sd: Add support for the mediatek MT7986 variant - renesas_sdhi: Improve reset from HS400 mode - renesas_sdhi: Take DMA end interrupts into account - sdhci: Avoid unnecessary update of clock - sdhci: Fix an SD tuning issue - sdhci-brcmst: Add Kamal Dasu as maintainer for the Broadcom driver - sdhci-esdhc-imx: Improve tuning logic - sdhci-esdhc-imx: Improve support for the imxrt1050 variant - sdhci_f_sdh30: Add support for non-removable media - sdhci_f_sdh30: Add support for the Socionext F_SDH30_E51 variant - sdhci_f_sdh30: Add reset control support - sdhci-msm: Add support for the Qcom SM8550/SM8350/SM6375 variants - sdhci-msm: Add support for the Qcom MSM8976 variant - sdhci-of-arasan: Add support for dynamic configuration - sdhci-of-esdhc: Limit the clock frequency to confirm to spec - sdhci-pci: Enable asynchronous probe - sdhci-sprd: Improve card detection - sdhci-tegra: Improve reset support - sdhci-tegra: Add support to program MC stream ID - sunplus-mmc: Add new mmc driver for the Sunplus SP7021 controller - vub300: Fix warning splat for SDIO irq MEMSTICK core: - memstick: A few minor improvements and cleanups CLK/IOMMU: - clk: socfpga: Drop redundant support for clk-phase for the SD/MMC clk - iommu: Add tegra specific helper to get stream_id" * tag 'mmc-v6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (108 commits) mmc: sdhci-sprd: Disable CLK_AUTO when the clock is less than 400K mmc: sdhci-of-esdhc: Modify mismatched function name memstick/mspro_block: Convert to use sysfs_emit()/sysfs_emit_at() APIs mmc: sdhci-tegra: Issue CMD and DAT resets together mmc: sdhci-tegra: Add support to program MC stream ID mmc: sdhci-tegra: Separate Tegra194 and Tegra234 SoC data mmc: sdhci-tegra: Sort includes alphabetically iommu/tegra: Add tegra_dev_iommu_get_stream_id() helper iommu: Add note about struct iommu_fwspec usage mmc: sdhci-brcmstb: Resolve "unused" warnings with CONFIG_OF=n dt-bindings: mmc: sdhci-msm: allow dma-coherent dt-bindings: mmc: sdhci-msm: drop properties mentioned in common MMC dt-bindings: mmc: sdhci-msm: cleanup style dt-bindings: mmc: sdhci-am654: cleanup style dt-bindings: mmc: sdhci: document sdhci-caps and sdhci-caps-mask mmc: vub300: fix warning - do not call blocking ops when !TASK_RUNNING MAINTAINERS: Update maintainer for SDHCI Broadcom BRCMSTB driver mmc: sdhci-of-esdhc: limit the SDHC clock frequency mmc: sdhci: Remove unneeded semicolon mmc: core: Normalize the error handling branch in sd_read_ext_regs() ...
2022-12-13Merge tag 'random-6.2-rc1-for-linus' of ↵Linus Torvalds2-3/+3
git://git.kernel.org/pub/scm/linux/kernel/git/crng/random Pull random number generator updates from Jason Donenfeld: - Replace prandom_u32_max() and various open-coded variants of it, there is now a new family of functions that uses fast rejection sampling to choose properly uniformly random numbers within an interval: get_random_u32_below(ceil) - [0, ceil) get_random_u32_above(floor) - (floor, U32_MAX] get_random_u32_inclusive(floor, ceil) - [floor, ceil] Coccinelle was used to convert all current users of prandom_u32_max(), as well as many open-coded patterns, resulting in improvements throughout the tree. I'll have a "late" 6.1-rc1 pull for you that removes the now unused prandom_u32_max() function, just in case any other trees add a new use case of it that needs to converted. According to linux-next, there may be two trivial cases of prandom_u32_max() reintroductions that are fixable with a 's/.../.../'. So I'll have for you a final conversion patch doing that alongside the removal patch during the second week. This is a treewide change that touches many files throughout. - More consistent use of get_random_canary(). - Updates to comments, documentation, tests, headers, and simplification in configuration. - The arch_get_random*_early() abstraction was only used by arm64 and wasn't entirely useful, so this has been replaced by code that works in all relevant contexts. - The kernel will use and manage random seeds in non-volatile EFI variables, refreshing a variable with a fresh seed when the RNG is initialized. The RNG GUID namespace is then hidden from efivarfs to prevent accidental leakage. These changes are split into random.c infrastructure code used in the EFI subsystem, in this pull request, and related support inside of EFISTUB, in Ard's EFI tree. These are co-dependent for full functionality, but the order of merging doesn't matter. - Part of the infrastructure added for the EFI support is also used for an improvement to the way vsprintf initializes its siphash key, replacing an sleep loop wart. - The hardware RNG framework now always calls its correct random.c input function, add_hwgenerator_randomness(), rather than sometimes going through helpers better suited for other cases. - The add_latent_entropy() function has long been called from the fork handler, but is a no-op when the latent entropy gcc plugin isn't used, which is fine for the purposes of latent entropy. But it was missing out on the cycle counter that was also being mixed in beside the latent entropy variable. So now, if the latent entropy gcc plugin isn't enabled, add_latent_entropy() will expand to a call to add_device_randomness(NULL, 0), which adds a cycle counter, without the absent latent entropy variable. - The RNG is now reseeded from a delayed worker, rather than on demand when used. Always running from a worker allows it to make use of the CPU RNG on platforms like S390x, whose instructions are too slow to do so from interrupts. It also has the effect of adding in new inputs more frequently with more regularity, amounting to a long term transcript of random values. Plus, it helps a bit with the upcoming vDSO implementation (which isn't yet ready for 6.2). - The jitter entropy algorithm now tries to execute on many different CPUs, round-robining, in hopes of hitting even more memory latencies and other unpredictable effects. It also will mix in a cycle counter when the entropy timer fires, in addition to being mixed in from the main loop, to account more explicitly for fluctuations in that timer firing. And the state it touches is now kept within the same cache line, so that it's assured that the different execution contexts will cause latencies. * tag 'random-6.2-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random: (23 commits) random: include <linux/once.h> in the right header random: align entropy_timer_state to cache line random: mix in cycle counter when jitter timer fires random: spread out jitter callback to different CPUs random: remove extraneous period and add a missing one in comments efi: random: refresh non-volatile random seed when RNG is initialized vsprintf: initialize siphash key using notifier random: add back async readiness notifier random: reseed in delayed work rather than on-demand random: always mix cycle counter in add_latent_entropy() hw_random: use add_hwgenerator_randomness() for early entropy random: modernize documentation comment on get_random_bytes() random: adjust comment to account for removed function random: remove early archrandom abstraction random: use random.trust_{bootloader,cpu} command line option only stackprotector: actually use get_random_canary() stackprotector: move get_random_canary() into stackprotector.h treewide: use get_random_u32_inclusive() when possible treewide: use get_random_u32_{above,below}() instead of manual loop treewide: use get_random_u32_below() instead of deprecated function ...
2022-12-09mmc: sdhci-sprd: Disable CLK_AUTO when the clock is less than 400KWenchao Chen1-7/+9
When the clock is less than 400K, some SD cards fail to initialize because CLK_AUTO is enabled. Fixes: fb8bd90f83c4 ("mmc: sdhci-sprd: Add Spreadtrum's initial host controller") Signed-off-by: Wenchao Chen <wenchao.chen@unisoc.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20221207051909.32126-1-wenchao.chen@unisoc.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-12-09mmc: sdhci-of-esdhc: Modify mismatched function nameJiapeng Chong1-2/+2
No functional modification involved. drivers/mmc/host/sdhci-of-esdhc.c:243: warning: expecting prototype for _fixup(). Prototype was for esdhc_writel_fixup() instead. drivers/mmc/host/sdhci-of-esdhc.c:117: warning: expecting prototype for _fixup(). Prototype was for esdhc_readl_fixup() instead. Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=3397 Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Link: https://lore.kernel.org/r/20221209034134.38477-1-jiapeng.chong@linux.alibaba.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-12-07mmc: sdhci-tegra: Issue CMD and DAT resets togetherPrathamesh Shete3-1/+9
In case of error condition to avoid system crash Tegra SDMMC controller requires CMD and DAT resets issued together. SDHCI controller FSM goes into bad state due to rapid SD card hot-plug event. Issuing reset on the CMD FSM before DATA FSM results in kernel panic, hence add support to issue CMD and DAT resets together. This is applicable to Tegra186 and later chips. Signed-off-by: Aniruddha TVS Rao <anrao@nvidia.com> Signed-off-by: Prathamesh Shete <pshete@nvidia.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://lore.kernel.org/r/20221206165945.3551774-7-thierry.reding@gmail.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-12-07mmc: sdhci-tegra: Add support to program MC stream IDPrathamesh Shete1-0/+30
SMMU clients are supposed to program stream ID from their respective address spaces instead of MC override. Define NVQUIRK_PROGRAM_STREAMID and use it to program SMMU stream ID from the SDMMC client address space. Signed-off-by: Aniruddha TVS Rao <anrao@nvidia.com> Signed-off-by: Prathamesh Shete <pshete@nvidia.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://lore.kernel.org/r/20221206165945.3551774-6-thierry.reding@gmail.com [Ulf: Fixed a checkpatch error] Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-12-07mmc: sdhci-tegra: Separate Tegra194 and Tegra234 SoC dataPrathamesh Shete1-0/+14
Create new SoC data structure for Tegra234 platforms. Additional features, tap value configurations are added/updated for Tegra234 platform hence separate Tegra194 and Tegra234 SoC data. Signed-off-by: Aniruddha Tvs Rao <anrao@nvidia.com> Signed-off-by: Prathamesh Shete <pshete@nvidia.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://lore.kernel.org/r/20221206165945.3551774-5-thierry.reding@gmail.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-12-07mmc: sdhci-tegra: Sort includes alphabeticallyThierry Reding1-11/+11
Sort includes alphabetically to make it easier to add new ones subsequently. Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://lore.kernel.org/r/20221206165945.3551774-4-thierry.reding@gmail.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-12-07mmc: sdhci-brcmstb: Resolve "unused" warnings with CONFIG_OF=nBrian Norris1-1/+1
With W=1, we can see this gcc warning: drivers/mmc/host/sdhci-brcmstb.c:182:34: warning: ‘sdhci_brcm_of_match’ defined but not used [-Wunused-const-variable=] 182 | static const struct of_device_id sdhci_brcm_of_match[] = { | ^~~~~~~~~~~~~~~~~~~ Rather than play around more with #ifdef's, the simplest solution is to just mark this __maybe_unused. Fixes: 50bfe185c42a ("mmc: sdhci-brcmstb: Allow building with COMPILE_TEST") Reported-by: kernel test robot <lkp@intel.com> Link: https://lore.kernel.org/all/202212060700.NjMecjxS-lkp@intel.com/ Signed-off-by: Brian Norris <briannorris@chromium.org> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20221205160353.1.I5fa28f1045f17fb9285d507accf139f8b2a8f4b5@changeid Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-12-07mmc: vub300: fix warning - do not call blocking ops when !TASK_RUNNINGDeren Wu1-0/+2
vub300_enable_sdio_irq() works with mutex and need TASK_RUNNING here. Ensure that we mark current as TASK_RUNNING for sleepable context. [ 77.554641] do not call blocking ops when !TASK_RUNNING; state=1 set at [<ffffffff92a72c1d>] sdio_irq_thread+0x17d/0x5b0 [ 77.554652] WARNING: CPU: 2 PID: 1983 at kernel/sched/core.c:9813 __might_sleep+0x116/0x160 [ 77.554905] CPU: 2 PID: 1983 Comm: ksdioirqd/mmc1 Tainted: G OE 6.1.0-rc5 #1 [ 77.554910] Hardware name: Intel(R) Client Systems NUC8i7BEH/NUC8BEB, BIOS BECFL357.86A.0081.2020.0504.1834 05/04/2020 [ 77.554912] RIP: 0010:__might_sleep+0x116/0x160 [ 77.554920] RSP: 0018:ffff888107b7fdb8 EFLAGS: 00010282 [ 77.554923] RAX: 0000000000000000 RBX: ffff888118c1b740 RCX: 0000000000000000 [ 77.554926] RDX: 0000000000000001 RSI: 0000000000000004 RDI: ffffed1020f6ffa9 [ 77.554928] RBP: ffff888107b7fde0 R08: 0000000000000001 R09: ffffed1043ea60ba [ 77.554930] R10: ffff88821f5305cb R11: ffffed1043ea60b9 R12: ffffffff93aa3a60 [ 77.554932] R13: 000000000000011b R14: 7fffffffffffffff R15: ffffffffc0558660 [ 77.554934] FS: 0000000000000000(0000) GS:ffff88821f500000(0000) knlGS:0000000000000000 [ 77.554937] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 77.554939] CR2: 00007f8a44010d68 CR3: 000000024421a003 CR4: 00000000003706e0 [ 77.554942] Call Trace: [ 77.554944] <TASK> [ 77.554952] mutex_lock+0x78/0xf0 [ 77.554973] vub300_enable_sdio_irq+0x103/0x3c0 [vub300] [ 77.554981] sdio_irq_thread+0x25c/0x5b0 [ 77.555006] kthread+0x2b8/0x370 [ 77.555017] ret_from_fork+0x1f/0x30 [ 77.555023] </TASK> [ 77.555025] ---[ end trace 0000000000000000 ]--- Fixes: 88095e7b473a ("mmc: Add new VUB300 USB-to-SD/SDIO/MMC driver") Signed-off-by: Deren Wu <deren.wu@mediatek.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/87dc45b122d26d63c80532976813c9365d7160b3.1670140888.git.deren.wu@mediatek.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-12-07mmc: sdhci-of-esdhc: limit the SDHC clock frequencyAndy Tang1-0/+7
The highest clock frequency for eMMC HS200 mode on ls1043a is 116.7Mhz according to its specification. So add the limit to gate the frequency. Signed-off-by: Andy Tang <andy.tang@nxp.com> Link: https://lore.kernel.org/r/20221202075905.25363-1-andy.tang@nxp.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-12-07mmc: sdhci: Remove unneeded semicolonzhang songyi1-1/+1
The semicolon after the "}" is unneeded. Signed-off-by: zhang songyi <zhang.songyi@zte.com.cn> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Link: https://lore.kernel.org/r/202212021031575255977@zte.com.cn Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-12-07mmc: core: Normalize the error handling branch in sd_read_ext_regs()Zhen Lei1-3/+8
Let's use pr_err() to output the error messages and let's extend a comment to clarify why returning 0 (success) in one case make sense. Fixes: c784f92769ae ("mmc: core: Read the SD function extension registers for power management") Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com> [Ulf: Clarified the comment and the commit-msg] Link: https://lore.kernel.org/r/20221130134920.2109-1-thunder.leizhen@huawei.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-12-07mmc: sdhci: Avoid unnecessary ->set_clock()Adrian Hunter1-23/+14
To avoid glitches on the clock line, the card clock is disabled when making timing changes. Do not do that separately for HISPD and UHS settings. Tested-by: Haibo Chen <haibo.chen@nxp.com> Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Link: https://lore.kernel.org/r/20221128133259.38305-4-adrian.hunter@intel.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-12-07mmc: mmc-hsq: Use fifo to dispatch mmc_requestMichael Wu2-25/+20
Current next_tag selection will cause a large delay in some requests and destroy the scheduling results of the block scheduling layer. Because the issued mrq tags cannot ensure that each time is sequential, especially when the IO load is heavy. In the fio performance test, we found that 4k random read data was sent to mmc_hsq to start calling request_atomic It takes nearly 200ms to process the request, while mmc_hsq has processed thousands of other requests. So we use fifo here to ensure the first in, first out feature of the request and avoid adding additional delay to the request. Reviewed-by: Wenchao Chen <wenchao.chen@unisoc.com> Signed-off-by: Michael Wu <michael@allwinnertech.com> Link: https://lore.kernel.org/r/20221128093847.22768-1-michael@allwinnertech.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-12-07mmc: core: refactor debugfs codeYe Bin3-8/+15
Now, CONFIG_DEBUG_FS is scattered in various functions, to make code clean centralized processing CONFIG_DEBUG_FS in mmc debugfs module. Signed-off-by: Ye Bin <yebin10@huawei.com> Link: https://lore.kernel.org/r/20221126102520.2824574-1-yebin@huaweicloud.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-12-07mmc: Avoid open coding by using mmc_op_tuning()ChanWoo Lee7-27/+10
Replace code with the already defined function. No functional changes. Signed-off-by: ChanWoo Lee <cw9316.lee@samsung.com> Reviewed-by: Adrian Hunter <adrian.hunter@intel.com> Link: https://lore.kernel.org/r/20221124080031.14690-1-cw9316.lee@samsung.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-12-07mmc: Remove unneeded semicolonYang Li1-1/+1
./drivers/mmc/host/sunplus-mmc.c:321:2-3: Unneeded semicolon Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=3238 Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Link: https://lore.kernel.org/r/20221123021221.9646-1-yang.lee@linux.alibaba.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-12-07mmc: core: Remove non-data R1B ioctl workaroundChristian Löhle1-13/+0
The workaround of pretending R1B non-data transfers are data transfers in order for the busy timeout to be respected by the host controller driver is removed. It wasn't useful in a long time. Initially the workaround ensured that R1B commands did not time out by setting the data timeout to be the command timeout in commit cb87ea28ed9e ("mmc: core: Add mmc CMD+ACMD passthrough ioctl"). This was moved inside an if-clause with idata->buf_bytes being set in commit 4d6144de8ba2 ("mmc: core: check for zero length ioctl data"). Since the workaround is now inside the idata->buf_bytes clause and intended to fix R1B non-data transfers, that do not have buf_bytes set, we can remove the workaround altogether. This was dead code, since data transfers doesn't use R1B commands. Signed-off-by: Christian Loehle <cloehle@hyperstone.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Link: https://lore.kernel.org/r/57d4aceb25254e448bd3e575bd99b0c2@hyperstone.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-12-07mmc: renesas_sdhi: use plain numbers for end_flagsWolfram Sang1-2/+2
Linux *_bit accessors take plain bit numbers, no need for BIT(). Fixes: c330601c9c93 ("mmc: renesas_sdhi: take DMA end interrupts into account") Reported-by: kernel test robot <lkp@intel.com> Reported-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://lore.kernel.org/r/20221122080554.4468-1-wsa+renesas@sang-engineering.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-12-07mmc: Add mmc driver for Sunplus SP7021Tony Huang3-0/+1010
This is a patch for mmc driver for Sunplus SP7021 SOC. Supports eMMC 4.41 DDR 104MB/s speed mode. Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Tony Huang <tonyhuang.sunplus@gmail.com> Link: https://lore.kernel.org/r/c92d67596f3cc10d41585b9ab82be7da2cc4c9d8.1669023361.git.tonyhuang.sunplus@gmail.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-12-07mmc: renesas_sdhi: use new convenience macro from MMC coreWolfram Sang1-2/+1
Makes the code more readable. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://lore.kernel.org/r/20221120113457.42010-5-wsa+renesas@sang-engineering.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-12-07mmc: renesas_sdhi: add helper to access quirksWolfram Sang3-13/+15
Add a macro to check for a quirk because it a) ensures that the check for non-empty 'quirks' struct is not forgotten and b) is easier to read. Convert existing quirk access as well. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://lore.kernel.org/r/20221120113457.42010-4-wsa+renesas@sang-engineering.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-12-07mmc: renesas_sdhi: better reset from HS400 modeWolfram Sang1-1/+1
Up to now, HS400 adjustment mode was only disabled on soft reset when a calibration table was in use. It is safer, though, to disable it as soon as the instance has an adjustment related quirk set, i.e. bad taps or a calibration table. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://lore.kernel.org/r/20221120113457.42010-3-wsa+renesas@sang-engineering.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-12-07mmc: renesas_sdhi: alway populate SCC pointerWolfram Sang1-5/+7
We need the SCC pointer to reset the device, so populate it even when we don't need it for tuning. Fixes: 45bffc371fef ("mmc: renesas_sdhi: only reset SCC when its pointer is populated") Signed-off-by: Takeshi Saito <takeshi.saito.xv@renesas.com> Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://lore.kernel.org/r/20221120113457.42010-2-wsa+renesas@sang-engineering.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-12-07mmc: pwrseq: Use device_match_of_node()ye xingchen1-1/+1
Replace the open-code with device_match_of_node(). Signed-off-by: ye xingchen <ye.xingchen@zte.com.cn> Link: https://lore.kernel.org/r/202211171524116446204@zte.com.cn Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-12-07mmc: dw_mmc-pltfm: socfpga: add method to configure clk-phaseDinh Nguyen1-1/+40
The clock-phase settings for the SDMMC controller in the SoCFPGA platforms reside in a register in the System Manager. Add a method to access that register through the syscon interface. Signed-off-by: Dinh Nguyen <dinguyen@kernel.org> Link: https://lore.kernel.org/r/20221114230217.202634-4-dinguyen@kernel.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-12-07mmc: sdhci: Fix the SD tuning issue that the SDHCI_TRANSFER_MODE is cleared ↵Charl Liu1-1/+1
incorrectly When cmd->opcode == MMC_SEND_TUNING_BLOCK, the SDHCI_TRANSFER_MODE should also be kept Signed-off-by: Charl Liu <charl.liu@bayhubtech.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Link: https://lore.kernel.org/r/20221111122314.307-1-charl.liu@bayhubtech.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-12-07mmc: tmio: remove 'alignment_shift' from platform dataWolfram Sang2-3/+2
There is only one alignment shift for one type of Renesas SDHI. Encode it directly in its DMA driver to reduce complexity and ease further simplifications. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://lore.kernel.org/r/20221102125430.28466-3-wsa+renesas@sang-engineering.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-12-07mmc: tmio: remove tmio_mmc_k(un)map_atomic helpersWolfram Sang3-20/+10
After a8402aed8ca5 ("mmc: tmio_mmc_core: Remove local_irq_{save,restore}() around k[un]map_atomic()") and ac91578a6812 ("mmc: tmio_mmc_core: Replace kmap_atomic() with kmap_local_page()"), the helpers contain just a single call. Putting it directly in the code makes it actually more readable. More so, because we now avoid the 'offset' calculation when mapping/unmapping and just use it when we need it in the copy routines. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://lore.kernel.org/r/20221102125430.28466-2-wsa+renesas@sang-engineering.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-12-07mmc: renesas_sdhi: take DMA end interrupts into accountWolfram Sang2-7/+49
So far, we have been relying on access_end interrupts only to mark DMA transfers as done implying that DMA end interrupts have occurred by then anyhow. On some SoCs under some conditions, this turned out to be not enough. So, we enable DMA interrupts as well and make sure that both events, DMA irq and access_end irq, have happened before finishing the DMA transfer. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Tested-by: Duy Nguyen <duy.nguyen.rh@renesas.com> Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://lore.kernel.org/r/20221006190452.5316-6-wsa+renesas@sang-engineering.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-12-07mmc: renesas_sdhi: add quirk for broken register layoutWolfram Sang2-1/+4
Some early Gen3 SoCs have the DTRANEND1 bit at a different location than all later SoCs. Because we need the bit soon, add a quirk so we know which bit to use. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Tested-by: Duy Nguyen <duy.nguyen.rh@renesas.com> Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://lore.kernel.org/r/20221006190452.5316-5-wsa+renesas@sang-engineering.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-12-07mmc: tmio: add callback for dma irqWolfram Sang2-0/+4
We don't want to rely only on the access_end irq in the future, so implement a callback for dma irqs. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Tested-by: Duy Nguyen <duy.nguyen.rh@renesas.com> Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://lore.kernel.org/r/20221006190452.5316-4-wsa+renesas@sang-engineering.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-12-07mmc: renesas_sdhi: improve naming of DMA structWolfram Sang2-5/+5
Commit 058db2868cd8 ("mmc: tmio, renesas_sdhi: move struct tmio_mmc_dma to renesas_sdhi.h") is correct. The DMA struct should be prefixed with 'renesas_sdhi' to avoid confusion about is namespace. Fix some indentation while here. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Tested-by: Duy Nguyen <duy.nguyen.rh@renesas.com> Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://lore.kernel.org/r/20221006190452.5316-3-wsa+renesas@sang-engineering.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-12-07mmc: renesas_sdhi: remove accessor function for internal_dmacWolfram Sang1-23/+8
This accessor function does not help readability but makes it worse. Because I soon need to read from the registers as well and don't want to add another function like this, I chose to remove the existing one and use the accessor directly. I also switch from writeq to writel because no 64 bit register is actually involved. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Tested-by: Duy Nguyen <duy.nguyen.rh@renesas.com> Tested-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://lore.kernel.org/r/20221006190452.5316-2-wsa+renesas@sang-engineering.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-12-07mmc: f-sdh30: Add quirks for broken timeout clock capabilityKunihiko Hayashi1-0/+3
There is a case where the timeout clock is not supplied to the capability. Add a quirk for that. Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Acked-by: Jassi Brar <jaswinder.singh@linaro.org> Link: https://lore.kernel.org/r/20221111081033.3813-7-hayashi.kunihiko@socionext.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-12-07mmc: f-sdh30: Add support for non-removable mediaKunihiko Hayashi2-0/+10
To use F_SDH30 for non-removable meda like eMMC, need to enable FORCE_CARD_INSERT bit to skip the delay for detection. Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Acked-by: Jassi Brar <jaswinder.singh@linaro.org> Link: https://lore.kernel.org/r/20221111081033.3813-6-hayashi.kunihiko@socionext.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-12-07mmc: f-sdh30: Add compatible string for Socionext F_SDH30_E51Kunihiko Hayashi1-1/+3
Add a compatible string for Socionext F_SDH30_E51. Since this IP is transferred to Socionext, so append it to Copyright and MODULE_AUTHOR as vendor name. F_SDH30_E51 is a higher version of F_SDH30 that supports eMMC 5.1, though, currently there are no new features for this IP in this driver, just add the compatible string. Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Link: https://lore.kernel.org/r/20221111081033.3813-5-hayashi.kunihiko@socionext.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-12-07mmc: f-sdh30: Add reset control supportKunihiko Hayashi1-1/+16
Add reset control support for F_SDH30 controller. This is optional. Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Acked-by: Jassi Brar <jaswinder.singh@linaro.org> Link: https://lore.kernel.org/r/20221111081033.3813-3-hayashi.kunihiko@socionext.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-12-07mmc: mtk-sd: fix two spelling mistakes in commentYu Zhe1-2/+2
spelling mistake fix : "alreay" -> "already" "checksume" -> "checksum" Signed-off-by: Yu Zhe <yuzhe@nfschina.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20221110072819.11530-1-yuzhe@nfschina.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-12-07mmc: mmci: fix return value check of mmc_add_host()Yang Yingliang1-1/+3
mmc_add_host() may return error, if we ignore its return value, it will lead two issues: 1. The memory that allocated in mmc_alloc_host() is leaked. 2. In the remove() path, mmc_remove_host() will be called to delete device, but it's not added yet, it will lead a kernel crash because of null-ptr-deref in device_del(). So fix this by checking the return value and goto error path which will call mmc_free_host(). Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Link: https://lore.kernel.org/r/20221109133539.3275664-1-yangyingliang@huawei.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-12-07mmc: wbsd: fix return value check of mmc_add_host()Yang Yingliang1-1/+11
mmc_add_host() may return error, if we ignore its return value, it will lead two issues: 1. The memory that allocated in mmc_alloc_host() is leaked. 2. In the remove() path, mmc_remove_host() will be called to delete device, but it's not added yet, it will lead a kernel crash because of null-ptr-deref in device_del(). So fix this by checking the return value and goto error path which will call mmc_free_host(), besides, other resources also need be released. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Link: https://lore.kernel.org/r/20221109133237.3273558-1-yangyingliang@huawei.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-12-07mmc: via-sdmmc: fix return value check of mmc_add_host()Yang Yingliang1-1/+3
mmc_add_host() may return error, if we ignore its return value, it will lead two issues: 1. The memory that allocated in mmc_alloc_host() is leaked. 2. In the remove() path, mmc_remove_host() will be called to delete device, but it's not added yet, it will lead a kernel crash because of null-ptr-deref in device_del(). Fix this by checking the return value and goto error path which will call mmc_free_host(). Fixes: f0bf7f61b840 ("mmc: Add new via-sdmmc host controller driver") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Link: https://lore.kernel.org/r/20221108130949.1067699-1-yangyingliang@huawei.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-12-07mmc: meson-gx: fix return value check of mmc_add_host()Yang Yingliang1-1/+3
mmc_add_host() may return error, if we ignore its return value, it will lead two issues: 1. The memory that allocated in mmc_alloc_host() is leaked. 2. In the remove() path, mmc_remove_host() will be called to delete device, but it's not added yet, it will lead a kernel crash because of null-ptr-deref in device_del(). Fix this by checking the return value and goto error path which will call mmc_free_host(). Fixes: 51c5d8447bd7 ("MMC: meson: initial support for GX platforms") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org> Link: https://lore.kernel.org/r/20221108123417.479045-1-yangyingliang@huawei.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-12-07mmc: omap_hsmmc: fix return value check of mmc_add_host()Yang Yingliang1-1/+3
mmc_add_host() may return error, if we ignore its return value, it will lead two issues: 1. The memory that allocated in mmc_alloc_host() is leaked. 2. In the remove() path, mmc_remove_host() will be called to delete device, but it's not added yet, it will lead a kernel crash because of null-ptr-deref in device_del(). Fix this by checking the return value and goto error path wihch will call mmc_free_host(). Fixes: a45c6cb81647 ("[ARM] 5369/1: omap mmc: Add new omap hsmmc controller for 2430 and 34xx, v3") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Link: https://lore.kernel.org/r/20221108121316.340354-1-yangyingliang@huawei.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-12-07mmc: atmel-mci: fix return value check of mmc_add_host()Yang Yingliang1-3/+6
mmc_add_host() may return error, if we ignore its return value, it will lead two issues: 1. The memory that allocated in mmc_alloc_host() is leaked. 2. In the remove() path, mmc_remove_host() will be called to delete device, but it's not added yet, it will lead a kernel crash because of null-ptr-deref in device_del(). So fix this by checking the return value and calling mmc_free_host() in the error path. Fixes: 7d2be0749a59 ("atmel-mci: Driver for Atmel on-chip MMC controllers") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Link: https://lore.kernel.org/r/20221108122819.429975-1-yangyingliang@huawei.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-12-07mmc: litex_mmc: ensure `host->irq == 0` if pollingGabriel Somlo1-0/+1
Ensure the flag is explicitly set to 0 if we determine that polling is needed during driver probe, to cover all possible cases. Fixes: 92e099104729 ("mmc: Add driver for LiteX's LiteSDCard interface") Signed-off-by: Gabriel Somlo <gsomlo@gmail.com> Link: https://lore.kernel.org/r/20221107155516.2535912-1-gsomlo@gmail.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-12-07mmc: wmt-sdmmc: fix return value check of mmc_add_host()Yang Yingliang1-1/+5
mmc_add_host() may return error, if we ignore its return value, the memory that allocated in mmc_alloc_host() will be leaked and it will lead a kernel crash because of deleting not added device in the remove path. So fix this by checking the return value and goto error path which will call mmc_free_host(), besides, clk_disable_unprepare() also needs be called. Fixes: 3a96dff0f828 ("mmc: SD/MMC Host Controller for Wondermedia WM8505/WM8650") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Link: https://lore.kernel.org/r/20221101063023.1664968-10-yangyingliang@huawei.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-12 02:50:36 +0300