summaryrefslogtreecommitdiff
path: root/drivers/mmc
AgeCommit message (Collapse)AuthorFilesLines
2022-03-22Merge tag 'spi-v5.18' of ↵Linus Torvalds1-2/+1
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi Pull spi updates from Mark Brown: "The overwhelming bulk of this pull request is a change from Uwe Kleine-König which changes the return type of the remove() function to void as part of some wider work he's doing to do this for all bus types, causing updates to most SPI device drivers. The branch with that on has been cross merged with a couple of other trees which added new SPI drivers this cycle, I'm not expecting any build issues resulting from the change. Otherwise it's been a relatively quiet release with some new device support, a few minor features and the welcome completion of the conversion of the subsystem to use GPIO descriptors rather than numbers: - Change return type of remove() to void. - Completion of the conversion of SPI controller drivers to use GPIO descriptors rather than numbers. - Quite a few DT schema conversions. - Support for multiple SPI devices on a bus in ACPI systems. - Big overhaul of the PXA2xx SPI driver. - Support for AMD AMDI0062, Intel Raptor Lake, Mediatek MT7986 and MT8186, nVidia Tegra210 and Tegra234, Renesas RZ/V2L, Tesla FSD and Sunplus SP7021" [ And this is obviously where that spi change that snuck into the regulator tree _should_ have been :^] * tag 'spi-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (124 commits) spi: fsi: Implement a timeout for polling status spi: Fix erroneous sgs value with min_t() spi: tegra20: Use of_device_get_match_data() spi: mediatek: add ipm design support for MT7986 spi: Add compatible for MT7986 spi: sun4i: fix typos in comments spi: mediatek: support tick_delay without enhance_timing spi: Update clock-names property for arm pl022 spi: rockchip-sfc: fix platform_get_irq.cocci warning spi: s3c64xx: Add spi port configuration for Tesla FSD SoC spi: dt-bindings: samsung: Add fsd spi compatible spi: topcliff-pch: Prevent usage of potentially stale DMA device spi: tegra210-quad: combined sequence mode spi: tegra210-quad: add acpi support spi: npcm-fiu: Fix typo ("npxm") spi: Fix Tegra QSPI example spi: qup: replace spin_lock_irqsave by spin_lock in hard IRQ spi: cadence: fix platform_get_irq.cocci warning spi: Update NXP Flexspi maintainer details dt-bindings: mfd: maxim,max77802: Convert to dtschema ...
2022-03-07mmc: core: Restore (almost) the busy polling for MMC_SEND_OP_CONDUlf Hansson5-8/+14
Commit 76bfc7ccc2fa ("mmc: core: adjust polling interval for CMD1"), significantly decreased the polling period from ~10-12ms into just a couple of us. The purpose was to decrease the total time spent in the busy polling loop, but unfortunate it has lead to problems, that causes eMMC cards to never gets out busy and thus fails to be initialized. To fix the problem, but also to try to keep some of the new improved behaviour, let's start by using a polling period of 1-2ms, which then increases for each loop, according to common polling loop in __mmc_poll_for_busy(). Reported-by: Jean Rene Dawin <jdawin@math.uni-bielefeld.de> Reported-by: H. Nikolaus Schaller <hns@goldelico.com> Cc: Huijin Park <huijin.park@samsung.com> Fixes: 76bfc7ccc2fa ("mmc: core: adjust polling interval for CMD1") Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Tested-by: Jean Rene Dawin <jdawin@math.uni-bielefeld.de> Tested-by: H. Nikolaus Schaller <hns@goldelico.com> Link: https://lore.kernel.org/r/20220304105656.149281-1-ulf.hansson@linaro.org
2022-02-28mmc: meson: Fix usage of meson_mmc_post_req()Rong Chen1-7/+8
Currently meson_mmc_post_req() is called in meson_mmc_request() right after meson_mmc_start_cmd(). This could lead to DMA unmapping before the request is actually finished. To fix, don't call meson_mmc_post_req() until meson_mmc_request_done(). Signed-off-by: Rong Chen <rong.chen@amlogic.com> Reviewed-by: Kevin Hilman <khilman@baylibre.com> Fixes: 79ed05e329c3 ("mmc: meson-gx: add support for descriptor chain mode") Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20220216124239.4007667-1-rong.chen@amlogic.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-02-09spi: make remove callback a void functionUwe Kleine-König1-2/+1
The value returned by an spi driver's remove function is mostly ignored. (Only an error message is printed if the value is non-zero that the error is ignored.) So change the prototype of the remove function to return no value. This way driver authors are not tempted to assume that passing an error to the upper layer is a good idea. All drivers are adapted accordingly. There is no intended change of behaviour, all callbacks were prepared to return 0 before. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Jérôme Pouiller <jerome.pouiller@silabs.com> Acked-by: Miquel Raynal <miquel.raynal@bootlin.com> Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Acked-by: Claudius Heine <ch@denx.de> Acked-by: Stefan Schmidt <stefan@datenfreihafen.org> Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # For MMC Acked-by: Marcus Folkesson <marcus.folkesson@gmail.com> Acked-by: Łukasz Stelmach <l.stelmach@samsung.com> Acked-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20220123175201.34839-6-u.kleine-koenig@pengutronix.de Signed-off-by: Mark Brown <broonie@kernel.org>
2022-02-08mmc: block: fix read single on recovery logicChristian Löhle1-14/+14
On reads with MMC_READ_MULTIPLE_BLOCK that fail, the recovery handler will use MMC_READ_SINGLE_BLOCK for each of the blocks, up to MMC_READ_SINGLE_RETRIES times each. The logic for this is fixed to never report unsuccessful reads as success to the block layer. On command error with retries remaining, blk_update_request was called with whatever value error was set last to. In case it was last set to BLK_STS_OK (default), the read will be reported as success, even though there was no data read from the device. This could happen on a CRC mismatch for the response, a card rejecting the command (e.g. again due to a CRC mismatch). In case it was last set to BLK_STS_IOERR, the error is reported correctly, but no retries will be attempted. Fixes: 81196976ed946c ("mmc: block: Add blk-mq support") Cc: stable@vger.kernel.org Signed-off-by: Christian Loehle <cloehle@hyperstone.com> Reviewed-by: Adrian Hunter <adrian.hunter@intel.com> Link: https://lore.kernel.org/r/bc706a6ab08c4fe2834ba0c05a804672@hyperstone.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-01-31moxart: fix potential use-after-free on remove pathGreg Kroah-Hartman1-1/+1
It was reported that the mmc host structure could be accessed after it was freed in moxart_remove(), so fix this by saving the base register of the device and using it instead of the pointer dereference. Cc: Ulf Hansson <ulf.hansson@linaro.org> Cc: Xiyu Yang <xiyuyang19@fudan.edu.cn> Cc: Xin Xiong <xiongx18@fudan.edu.cn> Cc: Xin Tan <tanxin.ctf@gmail.com> Cc: Tony Lindgren <tony@atomide.com> Cc: Yang Li <yang.lee@linux.alibaba.com> Cc: linux-mmc@vger.kernel.org Cc: stable <stable@vger.kernel.org> Reported-by: whitehat002 <hackyzh002@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://lore.kernel.org/r/20220127071638.4057899-1-gregkh@linuxfoundation.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-01-24mmc: core: Wait for command setting 'Power Off Notification' bit to completeAndrey Skvortsov1-1/+7
SD card is allowed to signal busy on DAT0 up to 1s after the CMD49. According to SD spec (version 6.0 section 5.8.1.3) first host waits until busy of CMD49 is released and only then polls Power Management Status register up to 1s until the card indicates ready to power off. Without waiting for busy before polling status register sometimes card becomes unresponsive and system fails to suspend: [ 205.907459] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done. [ 206.421274] sunxi-mmc 1c0f000.mmc: data error, sending stop command [ 206.421321] sunxi-mmc 1c0f000.mmc: send stop command failed [ 206.421347] mmc0: error -110 reading status reg of PM func [ 206.421366] PM: dpm_run_callback(): mmc_bus_suspend+0x0/0x74 returns -110 [ 206.421402] mmcblk mmc0:aaaa: PM: failed to suspend async: error -110 [ 206.437064] PM: Some devices failed to suspend, or early wake event detected Tested with Sandisk Extreme PRO A2 64GB on Allwinner A64 system. Signed-off-by: Andrey Skvortsov <andrej.skvortzov@gmail.com> Fixes: 2c5d42769038 ("mmc: core: Add support for Power Off Notification for SD cards") Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20220115121447.641524-1-andrej.skvortzov@gmail.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-01-24mmc: sh_mmcif: Check for null res pointerJiasheng Jiang1-0/+3
If there is no suitable resource, platform_get_resource() will return NULL. Therefore in order to avoid the dereference of the NULL pointer, it should be better to check the 'res'. Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn> Cc: stable@vger.kernel.org # v5.16+ Link: https://lore.kernel.org/r/20220119120006.1426964-1-jiasheng@iscas.ac.cn Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-01-24mmc: sdhci-of-esdhc: Check for error num after setting maskJiasheng Jiang1-2/+6
Because of the possible failure of the dma_supported(), the dma_set_mask_and_coherent() may return error num. Therefore, it should be better to check it and return the error if fails. And since the sdhci_setup_host() has already checked the return value of the enable_dma, we need not check it in sdhci_resume_host() again. Fixes: 5552d7ad596c ("mmc: sdhci-of-esdhc: set proper dma mask for ls104x chips") Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20220112083156.1124782-1-jiasheng@iscas.ac.cn Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2022-01-23Merge tag 'bitmap-5.17-rc1' of git://github.com/norov/linuxLinus Torvalds1-1/+1
Pull bitmap updates from Yury Norov: - introduce for_each_set_bitrange() - use find_first_*_bit() instead of find_next_*_bit() where possible - unify for_each_bit() macros * tag 'bitmap-5.17-rc1' of git://github.com/norov/linux: vsprintf: rework bitmap_list_string lib: bitmap: add performance test for bitmap_print_to_pagebuf bitmap: unify find_bit operations mm/percpu: micro-optimize pcpu_is_populated() Replace for_each_*_bit_from() with for_each_*_bit() where appropriate find: micro-optimize for_each_{set,clear}_bit() include/linux: move for_each_bit() macros from bitops.h to find.h cpumask: replace cpumask_next_* with cpumask_first_* where appropriate tools: sync tools/bitmap with mother linux all: replace find_next{,_zero}_bit with find_first{,_zero}_bit where appropriate cpumask: use find_first_and_bit() lib: add find_first_and_bit() arch: remove GENERIC_FIND_FIRST_BIT entirely include: move find.h from asm_generic to linux bitops: move find_bit_*_le functions from le.h to find.h bitops: protect find_first_{,zero}_bit properly
2022-01-18Merge tag 'pm-5.17-rc1-2' of ↵Linus Torvalds2-3/+3
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull more power management updates from Rafael Wysocki: "This is a continuation of the rework of device power management macros used for declaring device power management callbacks (Paul Cercueil)" * tag 'pm-5.17-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: iio: pressure: bmp280: Use new PM macros PM: runtime: Add EXPORT[_GPL]_RUNTIME_DEV_PM_OPS macros PM: runtime: Add DEFINE_RUNTIME_DEV_PM_OPS() macro PM: core: Add EXPORT[_GPL]_SIMPLE_DEV_PM_OPS macros PM: core: Remove static qualifier in DEFINE_SIMPLE_DEV_PM_OPS macro PM: core: Remove DEFINE_UNIVERSAL_DEV_PM_OPS() macro
2022-01-15bitmap: unify find_bit operationsYury Norov1-1/+1
bitmap_for_each_{set,clear}_region() are similar to for_each_bit() macros in include/linux/find.h, but interface and implementation of them are different. This patch adds for_each_bitrange() macros and drops unused bitmap_*_region() API in sake of unification. Signed-off-by: Yury Norov <yury.norov@gmail.com> Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Acked-by: Dennis Zhou <dennis@kernel.org> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # For MMC
2022-01-14Merge tag 'sound-5.17-rc1' of ↵Linus Torvalds1-2/+0
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound updates from Takashi Iwai: "It's a relatively calm development cycle, but still lots of updates in the driver side like Intel SOF. Below are some highlights: ALSA / ASoC core: - A new kselftest for ALSA control API - PCM NO_REWINDS support - Potential race fixes around control removals - Unify x86 SG-buffer memory allocation code - Cleanups and race fixes for ASoC DPCM locking ASoC: - Refinements and cleanups around the delay() APIs - Wider use of dev_err_probe(). - Continuing cleanups and improvements to the SOF code - Support for pin switches in simple-card derived cards - Support for AMD Renoir ACP, Asahi Kasei Microdevices AKM4375, Intel systems using NAU8825 and MAX98390, Mediatek MT8915, nVidia Tegra20 S/PDIF, Qualcomm systems using ALC5682I-VS and Texas Instruments TLV320ADC3xxx HD-audio / USB-audio: - Fix deadlock at HD-audio codec unbinding - Fixes for Tegra194 HD-audio, new HDA support for CS35L41 codec - Quirks for Lenovo and HP machines, Gigabyte mobo, Bose device Misc: - Fix virmidi drain behavior Note that the merge of CS35L41 codec support is still half-baked, and at least one ACPI change is missing. Although this won't hinder the kernel build itself, we're going to catch up before RC1" * tag 'sound-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (415 commits) ALSA: hda: intel-dsp-config: reorder the config table ALSA: hda: intel-dsp-config: add JasperLake support ALSA: hda: cs35l41: fix double free on error in probe() ALSA: hda: Fix dependencies of CS35L41 on SPI/I2C buses ALSA: hda: Fix dependency on ASoC cs35l41 codec ASoC: cs35l41: Add support for hibernate memory retention mode ASoC: cs35l41: Update handling of test key registers ALSA: intel_hdmi: Check for error num after setting mask ASoC: wcd9335: Keep a RX port value for each SLIM RX mux ASoC: amd: acp: acp-mach: Change default RT1019 amp dev id ALSA: virmidi: Remove duplicated code ALSA: seq: virmidi: Add a drain operation ASoC: topology: Fix typo ASoC: fsl_asrc: refine the check of available clock divider ASoC: Intel: bytcr_rt5640: Add support for external GPIO jack-detect ASoC: Intel: bytcr_rt5640: Support retrieving the codec IRQ from the AMCR0F28 ACPI dev ASoC: rt5640: Add support for boards with an external jack-detect GPIO ASoC: rt5640: Allow snd_soc_component_set_jack() to override the codec IRQ ASoC: rt5640: Change jack_work to a delayed_work ASoC: rt5640: Fix possible NULL pointer deref on resume ...
2022-01-13Merge tag 'clk-for-linus' of ↵Linus Torvalds4-13/+58
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk updates from Stephen Boyd: "We have a couple patches in the framework core this time around but they're mostly minor cleanups and some debugfs stuff. The real work that's in here is the typical pile of clk driver updates and new SoC support. Per usual (or maybe just recent trends), Qualcomm gains a handful of SoC drivers additions and has the largest diffstat. After that there are quite a few updates to the Allwinner (sunxi) drivers to support modular drivers and Renesas is heavily updated to add more support for various clks. Overall it looks pretty normal. New Drivers: - Add MDMA and BDMA clks to Ingenic JZ4760 and JZ4770 - MediaTek mt7986 SoC basic support - Clock and reset driver for Toshiba Visconti SoCs - Initial clock driver for the Exynos7885 SoC (Samsung Galaxy A8) - Allwinner D1 clks - Lan966x Generic Clock Controller driver and associated DT bindings - Qualcomm SDX65, SM8450, and MSM8976 GCC clks - Qualcomm SDX65 and SM8450 RPMh clks Updates: - Set suppress_bind_attrs to true for i.MX8ULP driver - Switch from do_div to div64_ul for throughout all i.MX drivers - Fix imx8mn_clko1_sels for i.MX8MN - Remove unused IPG_AUDIO_ROOT from i.MX8MP - Switch parent for audio_root_clk to audio ahb in i.MX8MP driver - Removal of all remaining uses of __clk_lookup() in drivers/clk/samsung - Refactoring of the CPU clocks registration to use common interface - An update of the Exynos850 driver (support for more clock domains) required by the E850-96 development board - Prep for runtime PM and generic power domains on Tegra - Support modular Allwinner clk drivers via platform bus - Lan966x clock driver extended to support clock gating - Add serial (SCI1), watchdog (WDT), timer (OSTM), SPI (RSPI), and thermal (TSU) clocks and resets on Renesas RZ/G2L - Rework SDHI clock handling in the Renesas R-Car Gen3 and RZ/G2 clock drivers, and in the Renesas SDHI driver - Make the Cortex-A55 (I) clock on Renesas RZ/G2L programmable - Document support for the new Renesas R-Car S4-8 (R8A779F0) SoC - Add support for the new Renesas R-Car S4-8 (R8A779F0) SoC - Add GPU clock and resets on Renesas RZ/G2L - Add clk-provider.h to various Qualcomm clk drivers - devm version of clk_hw_register_gate() - kerneldoc fixes in a couple drivers" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (131 commits) clk: visconti: Remove pointless NULL check in visconti_pll_add_lookup() clk: mediatek: add mt7986 clock support clk: mediatek: add mt7986 clock IDs dt-bindings: clock: mediatek: document clk bindings for mediatek mt7986 SoC clk: mediatek: clk-gate: Use regmap_{set/clear}_bits helpers clk: mediatek: clk-gate: Shrink by adding clockgating bit check helper clk: x86: Fix clk_gate_flags for RV_CLK_GATE clk: x86: Use dynamic con_id string during clk registration ACPI: APD: Add a fmw property clk-name drivers: acpi: acpi_apd: Remove unused device property "is-rv" x86: clk: clk-fch: Add support for newer family of AMD's SOC clk: ingenic: Add MDMA and BDMA clocks dt-bindings: clk/ingenic: Add MDMA and BDMA clocks clk: bm1880: remove kfrees on static allocations clk: Drop unused COMMON_CLK_STM32MP157_SCMI config clk: st: clkgen-mux: search reg within node or parent clk: st: clkgen-fsyn: search reg within node or parent clk: Enable/Disable runtime PM for clk_summary MAINTAINERS: Add entries for Toshiba Visconti PLL and clock controller clk: visconti: Add support common clock driver and reset driver ...
2022-01-12PM: core: Remove static qualifier in DEFINE_SIMPLE_DEV_PM_OPS macroPaul Cercueil2-3/+3
Keep this macro in line with the other ones. This makes it possible to use them in the cases where the underlying dev_pm_ops structure is exported. Restore the "static" qualifier in the two drivers where the DEFINE_SIMPLE_DEV_PM_OPS macro was used. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2022-01-12Merge tag 'for-5.17/block-2022-01-11' of git://git.kernel.dk/linux-blockLinus Torvalds1-17/+21
Pull block updates from Jens Axboe: - Unify where the struct request handling code is located in the blk-mq code (Christoph) - Header cleanups (Christoph) - Clean up the io_context handling code (Christoph, me) - Get rid of ->rq_disk in struct request (Christoph) - Error handling fix for add_disk() (Christoph) - request allocation cleanusp (Christoph) - Documentation updates (Eric, Matthew) - Remove trivial crypto unregister helper (Eric) - Reduce shared tag overhead (John) - Reduce poll_stats memory overhead (me) - Known indirect function call for dio (me) - Use atomic references for struct request (me) - Support request list issue for block and NVMe (me) - Improve queue dispatch pinning (Ming) - Improve the direct list issue code (Keith) - BFQ improvements (Jan) - Direct completion helper and use it in mmc block (Sebastian) - Use raw spinlock for the blktrace code (Wander) - fsync error handling fix (Ye) - Various fixes and cleanups (Lukas, Randy, Yang, Tetsuo, Ming, me) * tag 'for-5.17/block-2022-01-11' of git://git.kernel.dk/linux-block: (132 commits) MAINTAINERS: add entries for block layer documentation docs: block: remove queue-sysfs.rst docs: sysfs-block: document virt_boundary_mask docs: sysfs-block: document stable_writes docs: sysfs-block: fill in missing documentation from queue-sysfs.rst docs: sysfs-block: add contact for nomerges docs: sysfs-block: sort alphabetically docs: sysfs-block: move to stable directory block: don't protect submit_bio_checks by q_usage_counter block: fix old-style declaration nvme-pci: fix queue_rqs list splitting block: introduce rq_list_move block: introduce rq_list_for_each_safe macro block: move rq_list macros to blk-mq.h block: drop needless assignment in set_task_ioprio() block: remove unnecessary trailing '\' bio.h: fix kernel-doc warnings block: check minor range in device_add_disk() block: use "unsigned long" for blk_validate_block_size(). block: fix error unwinding in device_add_disk ...
2022-01-12Merge branches 'clk-x86', 'clk-stm', 'clk-amlogic' and 'clk-allwinner' into ↵Stephen Boyd1-0/+1
clk-next * clk-x86: clk: x86: Fix clk_gate_flags for RV_CLK_GATE clk: x86: Use dynamic con_id string during clk registration ACPI: APD: Add a fmw property clk-name drivers: acpi: acpi_apd: Remove unused device property "is-rv" x86: clk: clk-fch: Add support for newer family of AMD's SOC clk: Introduce clk-tps68470 driver platform/x86: int3472: Deal with probe ordering issues platform/x86: int3472: Pass tps68470_regulator_platform_data to the tps68470-regulator MFD-cell platform/x86: int3472: Pass tps68470_clk_platform_data to the tps68470-regulator MFD-cell platform/x86: int3472: Add get_sensor_adev_and_name() helper platform/x86: int3472: Split into 2 drivers platform_data: Add linux/platform_data/tps68470.h file i2c: acpi: Add i2c_acpi_new_device_by_fwnode() function i2c: acpi: Use acpi_dev_ready_for_enumeration() helper ACPI: delay enumeration of devices with a _DEP pointing to an INT3472 device * clk-stm: clk: stm32: Fix ltdc's clock turn off by clk_disable_unused() after system enter shell * clk-amlogic: clk: meson: gxbb: Fix the SDM_EN bit for MPLL0 on GXBB * clk-allwinner: clk: sunxi-ng: Add support for the D1 SoC clocks clk: sunxi-ng: gate: Add macros for gates with fixed dividers clk: sunxi-ng: mux: Add macros using clk_parent_data and clk_hw clk: sunxi-ng: mp: Add macros using clk_parent_data and clk_hw clk: sunxi-ng: div: Add macros using clk_parent_data and clk_hw dt-bindings: clk: Add compatibles for D1 CCUs clk: sunxi-ng: Allow the CCU core to be built as a module clk: sunxi-ng: Convert early providers to platform drivers clk: sunxi-ng: Allow drivers to be built as modules clk: sunxi-ng: Export symbols used by CCU drivers
2022-01-11Merge tag 'mmc-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmcLinus Torvalds32-442/+742
Pull MMC updates from Ulf Hansson: "MMC core: - Use common polling loop for CMD1 - Add support for DT compatibles for card quirks and use it for ti,wl1251 - Fixup storing of the OCR mask for MMC_QUIRK_NONSTD_SDIO MMC host: - dw_mmc: Add support for MMC_GEN_CMDs - dw_mmc: Fixup calculation of the data timeout - dw_mmc-exynos: Add support for the ARTPEC-8 variant - jz4740: Add support for bi-directional DMA channels - mmci: Add support for eMMC HS200 mode for the stm32 sdmmc variant - mmci: Add support for stm32 sdmmc variant revision v2.2 - mtk-sd: A couple of various minor improvements - omap_hsmmc: Drop redundant initialization for the ti,wl1251 chip - sdhci-esdhc-imx: Add support for the i.MXRT series variant - sdhci-esdhc-imx: Add Haibo Chen as maintainer - sdhci-pci: Add support for the Intel ADL variant - sdhci-pci-gli: GL975[50]: Add support for the Apple ARM64 variant - sdhci-pci-o2micro: Improve support for SDR104/HS200" * tag 'mmc-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (54 commits) dt-bindings: mmc: synopsys-dw-mshc: integrate Altera and Imagination mmc: pwrseq: Use bitmap_free() to free bitmap dt-bindings: mmc: PL18x stop relying on order of dma-names dt-bindings: mmc: sdhci-msm: Add compatible string for msm8994 mmc: au1xmmc: propagate errors from platform_get_irq() mmc: sdhci-pci-o2micro: Restore the SD clock's base clock frequency mmc: sdhci-pci-o2micro: Improve card input timing at SDR104/HS200 mode mmc: mtk-sd: Assign src_clk parent to src_clk_cg for legacy DTs mmc: mtk-sd: Fix usage of devm_clk_get_optional() mmc: mtk-sd: Take action for no-sdio device-tree parameter mmc: mtk-sd: Use BIT() and GENMASK() macros to describe fields mmc: mtk-sd: Use readl_poll_timeout instead of open-coded polling MAINTAINERS: Add i.MX sdhci maintainer mmc: jz4740: Support using a bi-directional DMA channel dt-bindings: mmc: ingenic: Support using bi-directional DMA channel mmc: dw_mmc: Do not wait for DTO in case of error mmc: dw_mmc: Add driver callbacks for data read timeout mmc: dw_mmc-exynos: Add support for ARTPEC-8 dt-bindings: mmc: exynos-dw-mshc: Add support for ARTPEC-8 mmc: meson-mx-sdio: add IRQ check ...
2022-01-11Merge tag 'pm-5.17-rc1' of ↵Linus Torvalds2-8/+6
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management updates from Rafael Wysocki: "The most signigicant change here is the addition of a new cpufreq 'P-state' driver for AMD processors as a better replacement for the venerable acpi-cpufreq driver. There are also other cpufreq updates (in the core, intel_pstate, ARM drivers), PM core updates (mostly related to adding new macros for declaring PM operations which should make the lives of driver developers somewhat easier), and a bunch of assorted fixes and cleanups. Summary: - Add new P-state driver for AMD processors (Huang Rui). - Fix initialization of min and max frequency QoS requests in the cpufreq core (Rafael Wysocki). - Fix EPP handling on Alder Lake in intel_pstate (Srinivas Pandruvada). - Make intel_pstate update cpuinfo.max_freq when notified of HWP capabilities changes and drop a redundant function call from that driver (Rafael Wysocki). - Improve IRQ support in the Qcom cpufreq driver (Ard Biesheuvel, Stephen Boyd, Vladimir Zapolskiy). - Fix double devm_remap() in the Mediatek cpufreq driver (Hector Yuan). - Introduce thermal pressure helpers for cpufreq CPU cooling (Lukasz Luba). - Make cpufreq use default_groups in kobj_type (Greg Kroah-Hartman). - Make cpuidle use default_groups in kobj_type (Greg Kroah-Hartman). - Fix two comments in cpuidle code (Jason Wang, Yang Li). - Allow model-specific normal EPB value to be used in the intel_epb sysfs attribute handling code (Srinivas Pandruvada). - Simplify locking in pm_runtime_put_suppliers() (Rafael Wysocki). - Add safety net to supplier device release in the runtime PM core code (Rafael Wysocki). - Capture device status before disabling runtime PM for it (Rafael Wysocki). - Add new macros for declaring PM operations to allow drivers to avoid guarding them with CONFIG_PM #ifdefs or __maybe_unused and update some drivers to use these macros (Paul Cercueil). - Allow ACPI hardware signature to be honoured during restore from hibernation (David Woodhouse). - Update outdated operating performance points (OPP) documentation (Tang Yizhou). - Reduce log severity for informative message regarding frequency transition failures in devfreq (Tzung-Bi Shih). - Add DRAM frequency controller devfreq driver for Allwinner sunXi SoCs (Samuel Holland). - Add missing COMMON_CLK dependency to sun8i devfreq driver (Arnd Bergmann). - Add support for new layout of Psys PowerLimit Register on SPR to the Intel RAPL power capping driver (Zhang Rui). - Fix typo in a comment in idle_inject.c (Jason Wang). - Remove unused function definition from the DTPM (Dynamit Thermal Power Management) power capping framework (Daniel Lezcano). - Reduce DTPM trace verbosity (Daniel Lezcano)" * tag 'pm-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (53 commits) x86, sched: Fix undefined reference to init_freq_invariance_cppc() build error cpufreq: amd-pstate: Fix Kconfig dependencies for AMD P-State cpufreq: amd-pstate: Fix struct amd_cpudata kernel-doc comment cpuidle: use default_groups in kobj_type x86: intel_epb: Allow model specific normal EPB value MAINTAINERS: Add AMD P-State driver maintainer entry Documentation: amd-pstate: Add AMD P-State driver introduction cpufreq: amd-pstate: Add AMD P-State performance attributes cpufreq: amd-pstate: Add AMD P-State frequencies attributes cpufreq: amd-pstate: Add boost mode support for AMD P-State cpufreq: amd-pstate: Add trace for AMD P-State module cpufreq: amd-pstate: Introduce the support for the processors with shared memory solution cpufreq: amd-pstate: Add fast switch function for AMD P-State cpufreq: amd-pstate: Introduce a new AMD P-State driver to support future processors ACPI: CPPC: Add CPPC enable register function ACPI: CPPC: Check present CPUs for determining _CPC is valid ACPI: CPPC: Implement support for SystemIO registers x86/msr: Add AMD CPPC MSR definitions x86/cpufeatures: Add AMD Collaborative Processor Performance Control feature flag cpufreq: use default_groups in kobj_type ...
2022-01-11Merge tag 'acpi-5.17-rc1' of ↵Linus Torvalds1-72/+6
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI updates from Rafael Wysocki: "These are usual ACPICA code updates (although there are more of them than in the last few releases), a noticeable EC driver update (which mostly consists of cleanups, though), the device enumeration quirks handling rework from Hans, some updates eliminating unnecessary CPU cache flushing in some places (processor idle and system-wide PM code) and a bunch of assorted cleanups and fixes. Specifics: - Update ACPICA code in the kernel to the 20211217 upstream release including the following changes: - iASL/Disassembler: Additional support for NHLT table (Bob Moore). - Change a return_ACPI_STATUS (AE_BAD_PARAMETER) (Bob Moore). - Fix a couple of warnings under MSVC (Bob Moore). - iASL: Add TDEL table to both compiler/disassembler (Bob Moore). - iASL/NHLT table: "Specific Data" field support (Bob Moore). - Use original data_table_region pointer for accesses (Jessica Clarke). - Use original pointer for virtual origin tables (Jessica Clarke). - Macros: Remove ACPI_PHYSADDR_TO_PTR (Jessica Clarke). - Avoid subobject buffer overflow when validating RSDP signature (Jessica Clarke). - iASL: Add suppport for AGDI table (Ilkka Koskinen). - Hardware: Do not flush CPU cache when entering S4 and S5 (Kirill A. Shutemov). - Expand the ACPI_ACCESS_ definitions (Mark Langsdorf). - Utilities: Avoid deleting the same object twice in a row (Rafael Wysocki). - Executer: Fix REFCLASS_REFOF case in acpi_ex_opcode_1A_0T_1R() (Rafael Wysocki). - Fix AEST Processor generic resource substructure data field byte length (Shuuichirou Ishii). - Fix wrong interpretation of PCC address (Sudeep Holla). - Add support for PCC Opregion special context data (Sudeep Holla). - Implement OperationRegion handler for PCC Type 3 subtype (Sudeep Holla). - Introduce acpi_fetch_acpi_dev() as a replacement for acpi_bus_get_device() and use it in the ACPI subsystem (Rafael Wysocki). - Avoid using _CID for device enumaration if _HID is missing or invalid (Rafael Wysocki). - Rework quirk handling during ACPI device enumeration and add some new quirks for known broken platforms (Hans de Goede). - Avoid unnecessary or redundant CPU cache flushing during system PM transitions (Kirill A. Shutemov). - Add PM debug messages related to power resources (Rafael Wysocki). - Fix kernel-doc comment in the PCI host bridge ACPI driver (Yang Li). - Rework flushing of EC work while suspended to idle and clean up the handling of events in the ACPI EC driver (Rafael Wysocki). - Prohibit ec_sys module parameter write_support from being used when the system is locked down (Hans de Goede). - Make the ACPI processor thermal driver use cpufreq_cpu_get() to check for presence of cpufreq policy (Manfred Spraul). - Avoid unnecessary CPU cache flushing in the ACPI processor idle driver (Kirill A. Shutemov). - Replace kernel.h with the necessary inclusions in the ACPI processor driver (Andy Shevchenko). - Use swap() instead of open coding it in the ACPI processor idle driver (Guo Zhengkui). - Fix the handling of defective LPAT in the ACPI xpower PMIC driver and clean up some definitions of PMIC data structures (Hans de Goede). - Fix outdated comment in the ACPI DPTF driver (Sumeet Pawnikar). - Add AEST to the list of known ACPI table signatures (Shuuichirou Ishii). - Make ACPI NUMA code take hotpluggable memblocks into account when CONFIG_MEMORY_HOTPLUG is not set (Vitaly Kuznetsov). - Use default_groups in kobj_type in the ACPI sysfs code (Greg Kroah-Hartman). - Rearrange _CPC structure documentation (Andy Shevchenko). - Drop an always true check from the ACPI thermal driver (Adam Borowski). - Add new "not charging" quirk for Lenovo ThinkPads to the ACPI battery driver (Thomas Weißschuh)" * tag 'acpi-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (64 commits) ACPI: PCC: Implement OperationRegion handler for the PCC Type 3 subtype ACPI / x86: Skip AC and battery devices on x86 Android tablets with broken DSDTs ACPI / x86: Introduce an acpi_quirk_skip_acpi_ac_and_battery() helper ACPI: processor: thermal: avoid cpufreq_get_policy() serdev: Do not instantiate serdevs on boards with known bogus DSDT entries i2c: acpi: Do not instantiate I2C-clients on boards with known bogus DSDT entries ACPI / x86: Add acpi_quirk_skip_[i2c_client|serdev]_enumeration() helpers ACPI: scan: Create platform device for BCM4752 and LNV4752 ACPI nodes PCI/ACPI: Fix acpi_pci_osc_control_set() kernel-doc comment ACPI: battery: Add the ThinkPad "Not Charging" quirk ACPI: sysfs: use default_groups in kobj_type ACPICA: Update version to 20211217 ACPICA: iASL/NHLT table: "Specific Data" field support ACPICA: iASL: Add suppport for AGDI table ACPICA: iASL: Add TDEL table to both compiler/disassembler ACPICA: Fixed a couple of warnings under MSVC ACPICA: Change a return_ACPI_STATUS (AE_BAD_PARAMETER) ACPICA: Hardware: Do not flush CPU cache when entering S4 and S5 ACPICA: Add support for PCC Opregion special context data ACPICA: Fix wrong interpretation of PCC address ...
2022-01-10Merge branches 'pm-cpuidle', 'pm-core' and 'pm-sleep'Rafael J. Wysocki2-8/+6
Merge cpuidle updates, PM core updates and one hiberation-related update for 5.17-rc1: - Make cpuidle use default_groups in kobj_type (Greg Kroah-Hartman). - Fix two comments in cpuidle code (Jason Wang, Yang Li). - Simplify locking in pm_runtime_put_suppliers() (Rafael Wysocki). - Add safety net to supplier device release in the runtime PM core code (Rafael Wysocki). - Capture device status before disabling runtime PM for it (Rafael Wysocki). - Add new macros for declaring PM operations to allow drivers to avoid guarding them with CONFIG_PM #ifdefs or __maybe_unused and update some drivers to use these macros (Paul Cercueil). - Allow ACPI hardware signature to be honoured during restore from hibernation (David Woodhouse). * pm-cpuidle: cpuidle: use default_groups in kobj_type cpuidle: Fix cpuidle_remove_state_sysfs() kerneldoc comment cpuidle: menu: Fix typo in a comment * pm-core: PM: runtime: Simplify locking in pm_runtime_put_suppliers() mmc: mxc: Use the new PM macros mmc: jz4740: Use the new PM macros PM: runtime: Add safety net to supplier device release PM: runtime: Capture device status before disabling runtime PM PM: core: Add new *_PM_OPS macros, deprecate old ones PM: core: Redefine pm_ptr() macro r8169: Avoid misuse of pm_ptr() macro * pm-sleep: PM: hibernate: Allow ACPI hardware signature to be honoured
2022-01-10Merge tag 'drivers-5.17' of ↵Linus Torvalds1-16/+65
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC driver updates from Arnd Bergmann: "There are cleanups and minor bugfixes across several SoC specific drivers, for Qualcomm, Samsung, NXP i.MX, AT91, Tegra, Keystone, Renesas, ZynqMP Noteworthy new features are: - The op-tee firmware driver gains support for asynchronous notifications from secure-world firmware. - Qualcomm platforms gain support for new SoC types in various drivers: power domain, cache controller, RPM sleep, soc-info - Samsung SoC drivers gain support for new SoCs in ChipID and PMU, as well as a new USIv2 driver that handles various types of serial communiction (uart, i2c, spi) - Renesas adds support for R-Car S4-8 (R8A779F0) in multiple drivers, as well as memory controller support for RZ/G2L (R9A07G044). - Apple M1 gains support for the PMGR power management driver" * tag 'drivers-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (94 commits) soc: qcom: rpmh-rsc: Fix typo in a comment soc: qcom: socinfo: Add SM6350 and SM7225 dt-bindings: arm: msm: Don't mark LLCC interrupt as required dt-bindings: firmware: scm: Add SM6350 compatible dt-bindings: arm: msm: Add LLCC for SM6350 soc: qcom: rpmhpd: Sort power-domain definitions and lists soc: qcom: rpmhpd: Remove mx/cx relationship on sc7280 soc: qcom: rpmhpd: Rename rpmhpd struct names soc: qcom: rpmhpd: sm8450: Add the missing .peer for sm8450_cx_ao soc: qcom: socinfo: add SM8450 ID soc: qcom: rpmhpd: Add SM8450 power domains dt-bindings: power: rpmpd: Add SM8450 to rpmpd binding soc: qcom: smem: Update max processor count dt-bindings: arm: qcom: Document SM8450 SoC and boards dt-bindings: firmware: scm: Add SM8450 compatible dt-bindings: arm: cpus: Add kryo780 compatible soc: qcom: rpmpd: Add support for sm6125 dt-bindings: qcom-rpmpd: Add sm6125 power domains soc: qcom: aoss: constify static struct thermal_cooling_device_ops PM: AVS: qcom-cpr: Use div64_ul instead of do_div ...
2022-01-10Merge branches 'acpi-x86', 'acpi-pmic' and 'acpi-dptf'Rafael J. Wysocki1-72/+6
Merge x86-specific ACPI updates, PMIC driver ACPI updates and a DPTF driver update for 5.17-rc1: - Rework the handling of device enumeration quirks in the x86-specific code and add new quirks for known-broken platforms (Hans de Goede). - Fix the handling of defective LPAT in the ACPI xpower PMIC driver and clean up some definitions of PMIC data structures (Hans de Goede). - Fix outdated comment in the ACPI DPTF driver (Sumeet Pawnikar). * acpi-x86: ACPI / x86: Skip AC and battery devices on x86 Android tablets with broken DSDTs ACPI / x86: Introduce an acpi_quirk_skip_acpi_ac_and_battery() helper mmc: sdhci-acpi: Use the new soc_intel_is_byt() helper mmc: sdhci-acpi: Remove special handling for GPD win/pocket devices ACPI / x86: Add PWM2 on the Xiaomi Mi Pad 2 to the always_present list ACPI / x86: Add not-present quirk for the PCI0.SDHB.BRC1 device on the GPD win ACPI / x86: Allow specifying acpi_device_override_status() quirks by path ACPI: Change acpi_device_always_present() into acpi_device_override_status() ACPI / x86: Drop PWM2 device on Lenovo Yoga Book from always present table * acpi-pmic: ACPI: PMIC: xpower: Fix _TMP ACPI errors ACPI: PMIC: allow drivers to provide a custom lpat_raw_to_temp() function ACPI: PMIC: constify all struct intel_pmic_opregion_data declarations * acpi-dptf: ACPI: DPTF: Update device ID in a comment
2021-12-28mmc: pwrseq: Use bitmap_free() to free bitmapChristophe JAILLET1-1/+1
kfree() and bitmap_free() are the same. But using the later is more consistent when freeing memory allocated with bitmap_alloc(). Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/07a8e48db446888bd77f16b88568e80904f52103.1640528089.git.christophe.jaillet@wanadoo.fr Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-12-28mmc: au1xmmc: propagate errors from platform_get_irq()Sergey Shtylyov1-1/+3
The driver overrides the error codes returned by platform_get_irq() to -ENODEV. Switch to propagating the error codes upstream. Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru> Tested-by: Manuel Lauss <manuel.lauss@gmail.com Link: https://lore.kernel.org/r/f642ef4d-6027-eb2e-0257-1c4f13911aed@omp.ru Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-12-28mmc: sdhci-pci-o2micro: Restore the SD clock's base clock frequencyFred Ai1-0/+5
Drop the SD clock's base clock for an SDR104 card, as frequency is wrong when inserting and SD2.0/SDR50 card. Signed-off-by: Fred Ai <fred.ai@bayhubtech.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Link: https://lore.kernel.org/r/20211216060824.357-2-fred.ai@bayhubtech.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-12-28mmc: sdhci-pci-o2micro: Improve card input timing at SDR104/HS200 modeFred Ai1-9/+48
Card input timing is margin, need to adjust the hold timing of card input. Signed-off-by: Fred Ai <fred.ai@bayhubtech.com> Link: https://lore.kernel.org/r/20211221040940.484-1-fred.ai@bayhubtech.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-12-28mmc: mtk-sd: Assign src_clk parent to src_clk_cg for legacy DTsAngeloGioacchino Del Regno1-12/+16
In commit 3c1a88443698 ("mmc: mediatek: add support of source_cg clock") an independent cg was introduced to avoid a hardware hang issue during clock mode switches (subsequent commits will set that clock as optional). When this clock is not present in device-tree, any operation is being done on src_clk's parent (calling clk_get_parent()): to simplify this and avoid checking for src_clk_cg presence everytime, just assign the parent clock to src_clk_cg and remove the now useless checks. Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20211216125748.179602-5-angelogioacchino.delregno@collabora.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-12-28mmc: mtk-sd: Fix usage of devm_clk_get_optional()AngeloGioacchino Del Regno1-1/+1
If we get an error during probe of an optional clock with function devm_clk_get_optional(), this means that the clock was provided, but an error occurred: this has to be escalated to the probe function for the driver probe to fail accordingly, or unexpected hardware behavior may happen. Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20211216125748.179602-4-angelogioacchino.delregno@collabora.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-12-28mmc: mtk-sd: Take action for no-sdio device-tree parameterAngeloGioacchino Del Regno1-7/+12
This driver was unconditionally enabling support for SDIO mode, but we do have a generic "no-sdio" DT parameter that sets caps2 MMC_CAP2_NO_SDIO. Modify the HW initialization sequence to enable SDIO support only if it hasn't been explicitly disabled in device-tree. Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20211216125748.179602-3-angelogioacchino.delregno@collabora.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-12-28mmc: mtk-sd: Use BIT() and GENMASK() macros to describe fieldsAngeloGioacchino Del Regno1-218/+219
Register fields are currently represented with open-coded bit shifting: replace all occurrences of that to make use of kernel provided macros BIT and GENMASK to increase human readability. This patch provides no functional change. Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20211216125748.179602-2-angelogioacchino.delregno@collabora.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-12-28mmc: mtk-sd: Use readl_poll_timeout instead of open-coded pollingAngeloGioacchino Del Regno1-25/+39
Replace all instances of open-coded while loops for polling registers with calls to readl_poll_timeout() and, while at it, also fix some possible infinite loop instances. Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://lore.kernel.org/r/20211216125748.179602-1-angelogioacchino.delregno@collabora.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-12-21mmc: jz4740: Support using a bi-directional DMA channelPaul Cercueil1-2/+17
Since the MMC/SD controller in Ingenic SoCs work in half-duplex, it is possible to use one single DMA channel for both TX and RX operations, instead of using separate channels. As some older Ingenic SoCs offer only a handful of DMA channels, supporting bi-directional channels allow more hardware to use the channels that would otherwise be used for the MMC/SD operation. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Link: https://lore.kernel.org/r/20211220190840.108061-3-paul@crapouillou.net Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-12-21mmc: dw_mmc: Do not wait for DTO in case of errorMårten Lindahl3-0/+19
When running the ARTPEC-8 DWMMC IP version, and a data error interrupt comes during a data read transfer, there is no guarantee for the data transfer over interrupt (DTO) to come within the specified data timeout. This case is handled by the dto_timer handler which will complete the request with the comment: /* * If DTO interrupt does NOT come in sending data state, * we should notify the driver to terminate current transfer * and report a data timeout to the core. */ But since the ARTPEC-8 DWMMC IP version, supports an extended TMOUT register which allows longer timeouts than the non ARTPEC-8 version does, waiting for the dto_timer to complete the request in error cases may cause the request to take significantly longer time than necessary. This is specifically true for the failing steps during tuning of a device. Fix this by completing the request when the error interrupt comes. Since this fix is specific for the ARTPEC-8, a quirk is added. Signed-off-by: Mårten Lindahl <marten.lindahl@axis.com> Link: https://lore.kernel.org/r/20211220113026.21129-5-marten.lindahl@axis.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-12-21mmc: dw_mmc: Add driver callbacks for data read timeoutMårten Lindahl3-1/+65
Current dw_mci driver supports a TMOUT register which consists of a 24 bit field (TMOUT[31:8]) for the DATA_TIMEOUT. The maximum value of this field is 0xFFFFFF, which with a 200MHz clock will give a full DRTO of: 0xFFFFFF / 200000000 => ~84 ms However, the ARTPEC-8 SoC DWMMC IP version has a TMOUT register with an extended DATA_TIMEOUT field, which supports longer timers for the DRTO. In this version the DATA_TIMEOUT field is split into two, which with the same 200MHz clock as above will allow a maximum timeout of: ((TMOUT[10:8] -1) * 0xFFFFFF + TMOUT[31:11] * 8) / 200000000 => ~587 ms Add driver callbacks for implementation specific data timeout, and implement callback functions for the ARTPEC-8 SoC. Signed-off-by: Mårten Lindahl <marten.lindahl@axis.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Link: https://lore.kernel.org/r/20211220113026.21129-4-marten.lindahl@axis.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-12-21mmc: dw_mmc-exynos: Add support for ARTPEC-8Mårten Lindahl1-11/+36
The ARTPEC-8 SoC has a DWMMC controller that is compatible with the Exynos 7 version v2.70a. The main differences from Exynos 7 is that it does not support HS400 and has extended data read timeout. This patch adds compatibility string "axis,artpec8-dw-mshc" for ARTPEC-8, and DW_MCI_TYPE_ARTPEC8 is added to the dw_mci_exynos_type. Signed-off-by: Mårten Lindahl <marten.lindahl@axis.com> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Link: https://lore.kernel.org/r/20211220113026.21129-3-marten.lindahl@axis.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-12-21mmc: meson-mx-sdio: add IRQ checkSergey Shtylyov1-0/+5
The driver neglects to check the result of platform_get_irq()'s call and blithely passes the negative error codes to devm_request_threaded_irq() (which takes *unsigned* IRQ #), causing it to fail with -EINVAL, overriding an original error code. Stop calling devm_request_threaded_irq() with the invalid IRQ #s. Fixes: ed80a13bb4c4 ("mmc: meson-mx-sdio: Add a driver for the Amlogic Meson8 and Meson8b SoC") Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Link: https://lore.kernel.org/r/20211217202717.10041-3-s.shtylyov@omp.ru Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-12-21mmc: meson-mx-sdhc: add IRQ checkSergey Shtylyov1-0/+5
The driver neglects to check the result of platform_get_irq()'s call and blithely passes the negative error codes to devm_request_threaded_irq() (which takes *unsigned* IRQ #), causing it to fail with -EINVAL, overriding an original error code. Stop calling devm_request_threaded_irq() with the invalid IRQ #s. Fixes: e4bf1b0970ef ("mmc: host: meson-mx-sdhc: new driver for the Amlogic Meson SDHC host") Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru> Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Link: https://lore.kernel.org/r/20211217202717.10041-2-s.shtylyov@omp.ru Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-12-21mmc: dw_mmc: clean up a debug messageDan Carpenter1-1/+1
The "0x" prefix is redundant when # flag is used. It prints "0x0x". Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Mårten Lindahl <marten.lindahl@axis.com> Link: https://lore.kernel.org/r/20211217150348.GD16611@kili Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-12-21mmc: sdhci-pci-gli: GL975[50]: Issue 8/16-bit MMIO reads as 32-bit reads.Hector Martin1-0/+23
For some reason, <32-bit reads do not work on Apple ARM64 platforms with these chips (even though they do on other PCIe devices). Issue them as 32-bit reads instead. This is done unconditionally, as it shouldn't hurt even if not necessary. Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Hector Martin <marcan@marcan.st> Link: https://lore.kernel.org/r/20211215161045.38843-3-marcan@marcan.st Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-12-21mmc: sdhci-pci-gli: GL9755: Support for CD/WP inversion on OF platformsHector Martin1-0/+11
This is required on some Apple ARM64 laptops using this controller. As is typical on DT platforms, pull these quirks from the device tree using the standard mmc bindings. See Documentation/devicetree/bindings/mmc/mmc-controller.yaml Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Hector Martin <marcan@marcan.st> Link: https://lore.kernel.org/r/20211215161045.38843-2-marcan@marcan.st Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-12-21mmc: core: Fix blk_status_t handlingJoel Stanley1-1/+1
Sparse spits out this following warning: drivers/mmc/core/queue.c:311:21: warning: incorrect type in assignment (different base types) drivers/mmc/core/queue.c:311:21: expected int ret drivers/mmc/core/queue.c:311:21: got restricted blk_status_t [usertype] drivers/mmc/core/queue.c:314:21: warning: incorrect type in assignment (different base types) drivers/mmc/core/queue.c:314:21: expected int ret drivers/mmc/core/queue.c:314:21: got restricted blk_status_t [usertype] drivers/mmc/core/queue.c:336:16: warning: incorrect type in return expression (different base types) drivers/mmc/core/queue.c:336:16: expected restricted blk_status_t drivers/mmc/core/queue.c:336:16: got int [assigned] ret ret is only used for blk_status_t types, so make it that type. Signed-off-by: Joel Stanley <joel@jms.id.au> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/20211215011336.194089-1-joel@jms.id.au Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-12-21mmc: mmci: add hs200 support for stm32 sdmmcYann Gautier1-2/+3
Use feedback clock for HS200 mode, as for SDR104. The HS200 mode can be enabled through DT by using mmc-hs200-1_8v. It is possible to use it on STM32MP13, but not STM32MP15 platforms. Signed-off-by: Ludovic Barre <ludovic.barre@foss.st.com> Signed-off-by: Yann Gautier <yann.gautier@foss.st.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20211215141727.4901-5-yann.gautier@foss.st.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-12-21mmc: mmci: increase stm32 sdmmcv2 clock max freqYann Gautier1-1/+1
The variant->f_max is dependent on the IP, not on the SoC where it is embedded. Set the max frequency of its source clock to 267MHz. The frequency used will be limited by the IOs max frequency, set in the SoC device tree. Signed-off-by: Yann Gautier <yann.gautier@foss.st.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20211215141727.4901-3-yann.gautier@foss.st.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-12-21mmc: mmci: Add support for sdmmc variant revision v2.2Yann Gautier1-0/+5
The change is only hardware, and does not need driver change: Added hardware flow control during transmit packet with variable delay. The new id is then added to the ids list structure. Signed-off-by: Yann Gautier <yann.gautier@foss.st.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20211215141727.4901-2-yann.gautier@foss.st.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-12-21Merge branch 'fixes' into nextUlf Hansson1-0/+2
2021-12-21mmc: mmci: stm32: clear DLYB_CR after sending tuning commandYann Gautier1-0/+2
During test campaign, and especially after several unbind/bind sequences, it has been seen that the SD-card on SDMMC1 thread could freeze. The freeze always appear on a CMD23 following a CMD19. Checking SDMMC internal registers shows that the tuning command (CMD19) has failed. The freeze is then due to the delay block involved in the tuning sequence. To correct this, clear the delay block register DLYB_CR register after the tuning commands. Signed-off-by: Christophe Kerello <christophe.kerello@foss.st.com> Signed-off-by: Yann Gautier <yann.gautier@foss.st.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Fixes: 1103f807a3b9 ("mmc: mmci_sdmmc: Add execute tuning with delay block") Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20211215141727.4901-4-yann.gautier@foss.st.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-12-20mmc: meson-mx-sdhc: Drop unused MESON_SDHC_NUM_BUILTIN_CLKS macroMartin Blumenstingl1-2/+0
Remove MESON_SDHC_NUM_BUILTIN_CLKS because it is not used anywhere in the driver. Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Link: https://lore.kernel.org/r/20211219153442.463863-3-martin.blumenstingl@googlemail.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2021-12-20Merge branch 'fixes' into nextUlf Hansson4-1/+32
2021-12-20mmc: meson-mx-sdhc: Set MANUAL_STOP for multi-block SDIO commandsMartin Blumenstingl1-0/+16
The vendor driver implements special handling for multi-block SD_IO_RW_EXTENDED (and SD_IO_RW_DIRECT) commands which have data attached to them. It sets the MANUAL_STOP bit in the MESON_SDHC_MISC register for these commands. In all other cases this bit is cleared. Here we omit SD_IO_RW_DIRECT since that command never has any data attached to it. This fixes SDIO wifi using the brcmfmac driver which reported the following error without this change on a Netxeon S82 board using a Meson8 (S802) SoC: brcmf_fw_alloc_request: using brcm/brcmfmac43362-sdio for chip BCM43362/1 brcmf_sdiod_ramrw: membytes transfer failed brcmf_sdio_download_code_file: error -110 on writing 219557 membytes at 0x00000000 brcmf_sdio_download_firmware: dongle image file download failed And with this change: brcmf_fw_alloc_request: using brcm/brcmfmac43362-sdio for chip BCM43362/1 brcmf_c_process_clm_blob: no clm_blob available (err=-2), device may have limited channels available brcmf_c_preinit_dcmds: Firmware: BCM43362/1 wl0: Apr 22 2013 14:50:00 version 5.90.195.89.6 FWID 01-b30a427d Fixes: e4bf1b0970ef96 ("mmc: host: meson-mx-sdhc: new driver for the Amlogic Meson SDHC host") Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20211219153442.463863-2-martin.blumenstingl@googlemail.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-24 17:36:37 +0300