Age | Commit message (Expand) | Author | Files | Lines |
2011-05-26 | mmc: sdhci: Auto-CMD23 fixes. | Andrei Warkentin | 1 | -2/+2 |
2011-05-26 | mmc: sdhci: Auto-CMD23 support. | Andrei Warkentin | 1 | -1/+16 |
2011-05-26 | mmc: sdhci: Implement MMC_CAP_CMD23 for SDHCI. | Andrei Warkentin | 1 | -16/+47 |
2011-05-25 | mmc: sdhci: add hooks for setting UHS in platform specific code | Philip Rakity | 1 | -15/+18 |
2011-05-25 | mmc: sdhci: add support for retuning mode 1 | Arindam Nath | 1 | -2/+107 |
2011-05-25 | mmc: sdhci: add support for programmable clock mode | Arindam Nath | 1 | -15/+66 |
2011-05-25 | mmc: sdhci: enable preset value after uhs initialization | Arindam Nath | 1 | -0/+32 |
2011-05-25 | mmc: sd: add support for tuning during uhs initialization | Arindam Nath | 1 | -1/+167 |
2011-05-25 | mmc: sd: set current limit for uhs cards | Arindam Nath | 1 | -0/+10 |
2011-05-25 | mmc: sd: add support for uhs bus speed mode selection | Arindam Nath | 1 | -3/+37 |
2011-05-25 | mmc: sdhci: reset sdclk before setting high speed enable | Arindam Nath | 1 | -3/+24 |
2011-05-25 | mmc: sd: add support for driver type selection | Arindam Nath | 1 | -0/+27 |
2011-05-25 | mmc: sd: add support for signal voltage switch procedure | Arindam Nath | 1 | -13/+179 |
2011-05-25 | mmc: sdhci: Fix read-only detection with JMicron 388 chip | Takashi Iwai | 1 | -4/+24 |
2011-05-25 | mmc: sdhci: Add pre and post reset processing for chip specific reset | Philip Rakity | 1 | -0/+6 |
2011-05-25 | mmc: sdhci: Fix SDHCI_QUIRK_TIMEOUT_USES_SDCLK | Mark Brown | 1 | -3/+4 |
2011-05-25 | mmc: sdhci: work around broken dma boundary behavior | Mikko Vinni | 1 | -5/+25 |
2011-05-25 | mmc: sdhci: R1B command handling + MMC_CAP_ERASE. | Andrei Warkentin | 1 | -16/+26 |
2011-04-28 | mmc: sdhci: Check mrq != NULL in sdhci_tasklet_finish | Chris Ball | 1 | -0/+7 |
2011-04-28 | mmc: sdhci: Check mrq->cmd in sdhci_tasklet_finish | Ben Dooks | 1 | -1/+1 |
2011-01-09 | mmc: sdhci: add quirk for max len ADMA descriptors | Olof Johansson | 1 | -3/+7 |
2011-01-09 | mmc: Test bus-width for old MMC devices | Aries Lee | 1 | -1/+6 |
2011-01-09 | mmc: Add support for JMicron 388 SD/MMC controller | Takashi Iwai | 1 | -5/+18 |
2011-01-09 | mmc: sdhci: print SD Command and CAPABILITY_1 when dumping registers | Philip Rakity | 1 | -1/+4 |
2010-11-22 | mmc: sdhci: 8-bit bus width changes | Philip Rakity | 1 | -11/+33 |
2010-11-08 | mmc: sdhci: Properly enable SDIO IRQ wakeups | Daniel Drake | 1 | -0/+10 |
2010-10-23 | mmc: sdhci: introduce get_ro private write-protect hook | Wolfram Sang | 1 | -6/+9 |
2010-10-23 | mmc: sdhci: allow for eMMC 74 clock generation by controller | Philip Rakity | 1 | -0/+3 |
2010-10-23 | mmc: sdhci: highspeed: check for mmc as well as sd cards | Philip Rakity | 1 | -2/+3 |
2010-10-23 | mmc: sdhci: fix "pwr may be used uninitialized" warning | Giuseppe Cavallaro | 1 | -4/+2 |
2010-10-23 | mmc: sdhci: disable MMC_CAP_NEEDS_POLL in nonremovable case | Jaehoon Chung | 1 | -1/+2 |
2010-10-23 | mmc: sdhci: print out controller name for register debug | Philip Rakity | 1 | -1/+2 |
2010-10-23 | mmc: sdhci: add MMC_CAP_8_BIT_DATA in the host capabilities | Giuseppe Cavallaro | 1 | -1/+1 |
2010-10-23 | mmc: sdhci: Enable high-speed support for MMC cards | Zhangfei Gao | 1 | -1/+1 |
2010-10-23 | mmc: SDHC 3.0: correct f_min calculation for SD 3.0 spec | Zhangfei Gao | 1 | -3/+5 |
2010-10-23 | mmc: SDHC 3.0: Base clock frequency change in spec 3.0 | Zhangfei Gao | 1 | -2/+7 |
2010-10-23 | mmc: SDHC 3.0: support 10-bit divided clock mode | Zhangfei Gao | 1 | -5/+20 |
2010-10-23 | mmc: sdhci: Make consistent use of CONFIG_MMC_DEBUG for "DEBUG"ging | George G. Davis | 1 | -1/+1 |
2010-10-23 | mmc: Remove distinction between hw and phys segments | Martin K. Petersen | 1 | -4/+3 |
2010-08-20 | sdhci: add no hi-speed bit quirk support | Kyungmin Park | 1 | -1/+2 |
2010-08-11 | sdhci: add auto CMD12 support for eSDHC driver | Jerry Huang | 1 | -2/+12 |
2010-08-11 | sdhci: add regulator support | Marek Szyprowski | 1 | -1/+25 |
2010-08-11 | sdhci-s3c: add support for the non standard minimal clock value | Marek Szyprowski | 1 | -2/+1 |
2010-08-11 | sdhci: don't assign mmc->caps at SDHCI directly | Kyungmin Park | 1 | -1/+1 |
2010-08-11 | sdhci: 8-bit data transfer width support | Kyungmin Park | 1 | -0/+5 |
2010-08-11 | sdhci: remove useless set_clock() check | Kyungmin Park | 1 | -1/+1 |
2010-08-11 | mmc: make sdhci work with ricoh mmc controller | Maxim Levitsky | 1 | -1/+2 |
2010-05-27 | mmc: remove the "state" argument to mmc_suspend_host() | Matt Fleming | 1 | -1/+1 |
2010-05-27 | mmc: s3c6410: add new quirk in sdhci driver and update ADMA descriptor build | Thomas Abraham | 1 | -5/+15 |
2010-05-27 | sdhci: implement CAP_CLOCK_BASE_BROKEN quirk | Anton Vorontsov | 1 | -1/+2 |