summaryrefslogtreecommitdiff
path: root/drivers/mmc/host/mtk-sd.c
AgeCommit message (Collapse)AuthorFilesLines
2017-06-20mmc: mediatek: Fixed size in dma_free_coherentPhong LE1-1/+1
The dma gpd dma_free_coherent call size in invalid. Fixes: 208489032bdd ("mmc: mediatek: Add Mediatek MMC driver") Signed-off-by: Phong LE <ple@baylibre.com> Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-04-24mmc: use new core function mmc_get_dma_dirHeiner Kallweit1-6/+2
Use new core function mmc_get_dma_dir(). Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-04-24mmc: mediatek: Use data tune for CMD line tuneyong mao1-16/+152
If we don't select a set of better parameters for our emmc host, It may easily occur CMD response CRC error. And also it may cause cannot boot up issue. Fot getting a set of better parameters, our emmc host supports data tune mechanism.Therefore, our emmc driver also should change to use data tune for CMD line. Because our emmc host use the different clock source to sample the CMD signal between HS200 and HS400 mode, the parameters are also different between these two modes. Separate cmd internal delay for HS200/HS400 mode. This change can fix "System can not boot up" issue. Signed-off-by: Yong Mao <yong.mao@mediatek.com> Signed-off-by: Chaotian Jing <chaotian.jing@mediatek.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-03-16mmc: mediatek: Fixed bug where clock frequency could be set wrongyong mao1-2/+2
This patch can fix two issues: Issue 1: In previous code, div may be overflow when setting clock frequency as f_min. We can use DIV_ROUND_UP to fix this boundary related issue. Issue 2: In previous code, we can not set the correct clock frequency when div equals 0xff. Signed-off-by: Yong Mao <yong.mao@mediatek.com> Signed-off-by: Chaotian Jing <chaotian.jing@mediatek.com> Reviewed-by: Daniel Kurtz <djkurtz@chromium.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-02-13mmc: mediatek: correct the implementation of msdc_card_busyyong mao1-5/+2
msdc_card_busy only need check if the data0 is low. In sdio data1 irq mode, data1 may be low because of interruption. Signed-off-by: Yong Mao <yong.mao@mediatek.com> Signed-off-by: Chaotian Jing <chaotian.jing@mediatek.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-02-13mmc: host: Include interrupt.h in mmc host drivers that depends on itUlf Hansson1-0/+1
An mmc host driver shouldn't rely on interrupt.h being included by another public mmc header. Instead make that dependency explicit by including interrupt.h in those host drivers that depends on it. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
2016-11-29mmc: delete is_first_req parameter from pre-request callbackLinus Walleij1-2/+1
The void (*pre_req) callback in the struct mmc_host_ops vtable is passing an argument "is_first_req" indicating whether this is the first request or not. None of the in-kernel users use this parameter: instead, since they all just do variants of dma_map* they use the DMA cookie to indicate whether a pre* callback has already been done for a request when they decide how to handle it. Delete the parameter from the callback and all users, as it is just pointless cruft. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2016-11-29mmc: mediatek: Fix module autoloadJavier Martinez Canillas1-0/+1
If the driver is built as a module, autoload won't work because the module alias information is not filled. So user-space can't match the registered device with the corresponding module. Export the module alias information using the MODULE_DEVICE_TABLE() macro. Before this patch: $ modinfo drivers/mmc/host/mtk-sd.ko | grep alias $ After this patch: $ modinfo drivers/mmc/host/mtk-sd.ko | grep alias alias: of:N*T*Cmediatek,mt8135-mmcC* alias: of:N*T*Cmediatek,mt8135-mmc Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2016-07-25mmc: mediatek: perfer to use rise edge latchingChaotian Jing1-9/+14
in our host design, rise edge latching is more stable than fall edge latching. so that if rise edge has enough margin, no need scan fall edge. Signed-off-by: Chaotian Jing <chaotian.jing@mediatek.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2016-07-25mmc: mediatek: fix CMD21/CMD19 timeout issueChaotian Jing1-2/+12
we did not deal with the read data of CMD21/CMD19 if there is response CRC error of CMD21/CMD19, in this case, eMMC/SD may still in send-data state. therefore, all of next commands cannot get response as device is not in transfer state. for resolving this issue, still need deal with the data receive to make device back to transfer state. Signed-off-by: Chaotian Jing <chaotian.jing@mediatek.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2016-07-25mmc: mediatek: fix CRC error when calling mmc_select_hs400()Chaotian Jing1-0/+23
the tune result of hs200 mode at 200Mhz is not suitable for 50Mhz, mmc_select_hs400() will set clock frequency to 50Mhz, use defalut tune setting for 50Mhz to avoid CRC error. Signed-off-by: Chaotian Jing <chaotian.jing@mediatek.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2016-07-25mmc: mediatek: do not tune data for HS400 modeChaotian Jing1-3/+7
for hs400 mode, should only tune DS delay, should not tune PAD_TUNE for data path. if eMMC will run at hs400 mode, do not tune data while call ops->execute_tuning(). Signed-off-by: Chaotian Jing <chaotian.jing@mediatek.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2016-05-02mmc: mediatek: Remove redundant runtime PM callsUlf Hansson1-17/+2
Commit 9250aea76bfc ("mmc: core: Enable runtime PM management of host devices"), made some calls to the runtime PM API from the driver redundant. Especially those which deals with runtime PM reference counting, so let's remove them. Cc: Chaotian Jing <chaotian.jing@mediatek.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2016-03-17mmc: mediatek: Use mmc_regulator_set_vqmmc in start_signal_voltage_switchNicolas Boichat1-12/+5
We've introduced a new helper in the MMC core: mmc_regulator_set_vqmmc(). Let's use this in mtk-sd. Using this new helper has some advantages: 1. We get the mmc_regulator_set_vqmmc() behavior of trying to match VQMMC and VMMC when the signal voltage is 3.3V. This ensures max compatibility. 2. We get rid of a few more warnings when probing unsupported voltages. 3. We get rid of some non-mediatek specific code in mtk-sd. Signed-off-by: Nicolas Boichat <drinkcat@chromium.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2016-03-17mmc: mediatek: Change signal voltage error to dev_dbg()Nicolas Boichat1-1/+1
In commit ceae98f20e36 ("mmc: core: Try other signal levels during power up") we can see that there are times when it's valid to try several signal voltages. Don't print an ugly error in the logs when that happens. Signed-off-by: Nicolas Boichat <drinkcat@chromium.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2016-02-29mmc: mediatek: add SD write protect supportChaotian Jing1-0/+2
use mmc core layer's API to support sd write protect Signed-off-by: Chaotian Jing <chaotian.jing@mediatek.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-12-22mmc: mediatek: change some dev_err to dev_dbgChaotian Jing1-4/+4
there are too many error logs shown when use CMD21/CMD19 to do tune, and it will appear at each resume time, print out so many logs to the uart console cost too mush time. so change it to dev_dbg. Signed-off-by: Chaotian Jing <chaotian.jing@mediatek.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-12-22mmc: core: Remove MMC_CAP_RUNTIME_RESUME as it's redundantUlf Hansson1-1/+0
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-11-09mmc: mediatek: Preinitialize delay_phase in get_best_delay()Geert Uytterhoeven1-1/+1
drivers/mmc/host/mtk-sd.c: In function ‘get_best_delay’: drivers/mmc/host/mtk-sd.c:1284: warning: ‘delay_phase.start’ is used uninitialized in this function drivers/mmc/host/mtk-sd.c:1284: warning: ‘delay_phase.maxlen’ is used uninitialized in this function If delay is zero, these fields are indeed not initialized. Let the compiler preinitialize the whole struct to fix this. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-10-27mmc: mediatek: add HS400 supportChaotian Jing1-5/+244
add HS400 mode and tune support Signed-off-by: Chaotian Jing <chaotian.jing@mediatek.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-10-27mmc: mediatek: add implement of ops->hw_reset()Chaotian Jing1-0/+11
add implement of ops->hw_reset() for eMMC Signed-off-by: Chaotian Jing <chaotian.jing@mediatek.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-10-27mmc: mediatek: fix got GPD checksum error interrupt when data transferChaotian Jing1-4/+7
Even if we only use one gpd, we need alloc 2 gpd and make the gpd->next pointer to the second gpd, or may get gpd checksum error, this was checked by hardware Signed-off-by: Chaotian Jing <chaotian.jing@mediatek.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-10-27mmc: mediatek: change the argument "ddr" to "timing"Chaotian Jing1-12/+8
use the ios->timing directly is better It can reflect current timing and do settings by timing Signed-off-by: Chaotian Jing <chaotian.jing@mediatek.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-10-27mmc: mediatek: make cmd_ints_mask to constChaotian Jing1-9/+6
cmd_ints_mask and data_ints_mask are constant value, so make it to const Signed-off-by: Chaotian Jing <chaotian.jing@mediatek.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-10-26mmc: mediatek: Add MMC_CAP_RUNTIME_RESUME supportChaotian Jing1-1/+1
Add MMC_CAP_RUNTIME_RESUME support to save resume time Drop unnecessary SDC_ARG write Signed-off-by: Chaotian Jing <chaotian.jing@mediatek.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-06-18mmc: mediatek: Add PM support for MMC driverChaotian Jing1-3/+86
Add PM support for Mediatek MMC driver Save/restore registers when PM Signed-off-by: Chaotian Jing <chaotian.jing@mediatek.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-06-18mmc: mediatek: Add Mediatek MMC driverChaotian Jing1-0/+1379
Add Mediatek MMC driver code Support eMMC/SD/SDIO Signed-off-by: Chaotian Jing <chaotian.jing@mediatek.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-07 23:37:44 +0300