summaryrefslogtreecommitdiff
path: root/drivers/misc
AgeCommit message (Collapse)AuthorFilesLines
2021-06-18habanalabs: load boot fit to deviceOhad Sharabi4-69/+615
Implementing dynamic boot fit image load to the device. Note that some necessary adjustment were added to the static loader as well so that both loaders can co-exist. as this is not the final FW load stage the dynamic FW load is still forced to be non functional. Signed-off-by: Ohad Sharabi <osharabi@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2021-06-18habanalabs: use dev_dbg upon hint address failureOded Gabbay1-2/+4
Hint address failure that results in a valid mapping with an address that was allocated by the driver is not a real failure. Therefore, the driver shouldn't notify about this in kernel log. The user is responsible to check the returned address. Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2021-06-18habanalabs: modify progress status messagesGuy Nisan1-10/+10
Indicate "progress" instead of "error" when reporting progress status. Change "u-boot stopped by user" to "Cannot boot" message as CPU_BOOT_STATUS_UBOOT_NOT_READY may indicate a fatal error that prevent u-boot from loading firmware. Signed-off-by: Guy Nisan <gnisan@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2021-06-18habanalabs: give FW a grace time for configuring iATUOfir Bitton1-0/+4
iATU (internal Address Translation Unit of the PCI controller) configuration is being done by FW right after driver enables the PCI device. Hence, driver must add a minor sleep afterwards in order to make sure FW finishes configuring iATU regions. Signed-off-by: Ofir Bitton <obitton@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2021-06-18habanalabs: update to latest f/w headersOded Gabbay5-43/+88
Update the common and GAUDI firmware header files to the latest version. The latest version use the correct endianness types so this commit also contains minor changes to the code to use the correct conversions when reading/writing to the firmware structures. Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2021-06-18habanalabs: expose ASIC specific PCI info to common codeOhad Sharabi4-0/+124
LKD has interfaces in which it receives device address. For instance the debugfs_read/write variants receives device address for CFG/SRAM/DRAM for read/write and need to translate to the mapped PCI BAR address. In addition, the dynamic FW load protocol dictates that the address to which the LKD will copy the image for the next FW component will be received as a device address and can be placed either in SRAM or DRAM. We need to distinguish those regions as the access methods to those regions are different (in DRAM we possibly need to set the BAR base). Looking forward this code will be used to remove duplicated code in the debugfs_read/write that search the memory region for the input device address. Signed-off-by: Ohad Sharabi <osharabi@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2021-06-18habanalabs: dynamic fw load reset protocolOhad Sharabi4-40/+360
First stage of the dynamic FW load protocol is to reset the protocol to avoid residues from former load cycles. Signed-off-by: Ohad Sharabi <osharabi@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2021-06-18habanalabs: use common fw_version readOhad Sharabi4-93/+74
Instead of using multiple ASIC specific copies of functions to read the FW version use single common one that gets ASIC specific arguments. Signed-off-by: Ohad Sharabi <osharabi@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2021-06-18habanalabs: use mmu cache range invalidationAlon Mizrahi4-94/+16
Use mmu cache range invalidation instead of entire cache invalidation because it yields better performance. In GOYA and GAUDI, always use entire cache invalidation because these ASICs don't support range invalidation. Signed-off-by: Alon Mizrahi <amizrahi@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2021-06-18habanalabs: refactor init device cpu codeOhad Sharabi4-28/+82
Replace multiple arguments to init device CPU function by passing firmware loader managing structure that is initialized per ASIC with the loader parameters. In addition, the FW loader management structure is now part of the habanalabs device, this way the loader parameters will be able to be communicated across various boot stages. Signed-off-by: Ohad Sharabi <osharabi@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2021-06-18habanalabs: request f/w in separate functionOhad Sharabi1-21/+44
This refactor is needed due to the dynamic FW load in which requesting the FW file (and getting its attributes) is not immediately followed by copying FW file content. Signed-off-by: Ohad Sharabi <osharabi@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2021-06-18habanalabs: prepare preboot stage to dynamic f/w loadOhad Sharabi2-15/+71
Start the skeleton for the dynamic F/W load by marking current preboot code path as legacy. Signed-off-by: Ohad Sharabi <osharabi@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2021-06-18habanalabs: update firmware files to latestOded Gabbay2-2/+4
Update the firmware files to the latest from the firmware team. Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2021-06-18habanalabs: increase ELBI reset timeout for PLDMMoti Haimovski1-1/+1
On PLDM, in case of NIC hangs, the ELBI reset to take much longer than expected. As a result an increase in the ELBI reset timeout is required. Signed-off-by: Moti Haimovski <mhaimovski@habana.ai> Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2021-06-15mei: hdcp: SPDX tag should be the first lineTom Rix1-1/+0
checkpatch looks for the tag on the first line. So delete empty first line Signed-off-by: Tom Rix <trix@redhat.com> Link: https://lore.kernel.org/r/20210610214438.3161140-4-trix@redhat.com Acked-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-15arm64: Add ARM64_PTR_AUTH_KERNEL config optionDaniel Kiss1-3/+3
This patch add the ARM64_PTR_AUTH_KERNEL config and deals with the build aspect of it. Userspace support has no dependency on the toolchain therefore all toolchain checks and build flags are controlled the new config option. The default config behavior will not be changed. Signed-off-by: Daniel Kiss <daniel.kiss@arm.com> Acked-by: Will Deacon <will@kernel.org> Reviewed-by: Catalin Marinas <catalin.marinas@arm.com> Link: https://lore.kernel.org/r/20210613092632.93591-2-daniel.kiss@arm.com Signed-off-by: Will Deacon <will@kernel.org>
2021-06-14Merge tag 'v5.13-rc6' into tty-nextGreg Kroah-Hartman9-13/+42
We want the tty fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-14Merge tag 'v5.13-rc6' into driver-core-nextGreg Kroah-Hartman9-13/+42
We need the driver core fix in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-14Merge tag 'v5.13-rc6' into char-misc-nextGreg Kroah-Hartman9-13/+42
We need the fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-12nvmem: eeprom: at25: fram discovery simplificationJiri Prchal1-8/+5
Changed "is_fram" to bool and set it based on compatible string. Signed-off-by: Jiri Prchal <jiri.prchal@aksignal.cz> Link: https://lore.kernel.org/r/20210611152416.68386-1-jiri.prchal@aksignal.cz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-11nvmem: eeprom: at25: fix type compiler warningsJiri Prchal1-3/+3
Fixes: drivers/misc/eeprom/at25.c:181:28: warning: field width should have type 'int', but argument has type 'unsigned long' drivers/misc/eeprom/at25.c:386:13: warning: cast to smaller integer type 'int' from 'const void *' Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Jiri Prchal <jiri.prchal@aksignal.cz> Fixes: fd307a4ad332 ("nvmem: prepare basics for FRAM support") Link: https://lore.kernel.org/r/20210611142706.27336-1-jiri.prchal@aksignal.cz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-11nvmem: prepare basics for FRAM supportJiri Prchal2-32/+134
Added enum and string for FRAM (ferroelectric RAM) to expose it as file named "fram". Added documentation of sysfs file. Signed-off-by: Jiri Prchal <jiri.prchal@aksignal.cz> Link: https://lore.kernel.org/r/20210611094601.95131-2-jiri.prchal@aksignal.cz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-09misc: rtsx: separate aspm mode into MODE_REG and MODE_CFGRicky Wu9-13/+42
aspm (Active State Power Management) rtsx_comm_set_aspm: this function is for driver to make sure not enter power saving when processing of init and card_detcct ASPM_MODE_CFG: 8411 5209 5227 5229 5249 5250 Change back to use original way to control aspm ASPM_MODE_REG: 5227A 524A 5250A 5260 5261 5228 Keep the new way to control aspm Fixes: 121e9c6b5c4c ("misc: rtsx: modify and fix init_hw function") Reported-by: Chris Chiu <chris.chiu@canonical.com> Tested-by: Gordon Lack <gordon.lack@dsl.pipex.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Ricky Wu <ricky_wu@realtek.com> Link: https://lore.kernel.org/r/20210607101634.4948-1-ricky_wu@realtek.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-09uacce: add print information if not enable svaKai Ye1-2/+9
Add print information necessary if user not enable sva. Signed-off-by: Kai Ye <yekai13@huawei.com> Link: https://lore.kernel.org/r/1623233345-8765-1-git-send-email-yekai13@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-09eeprom: idt_89hpesx: use SPDX-License-IdentifierAndy Shevchenko1-32/+1
Use SPDX-License-Identifier: GPL-2.0-only, instead of hand writing it. Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20210607221757.81465-3-andy.shevchenko@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-09eeprom: idt_89hpesx: Restore printing the unsupported fwnode nameAndy Shevchenko1-4/+3
When iterating over child firmware nodes restore printing the name of ones that are not supported. While at it, refactor loop body to clearly show that we stop at the first match. Fixes: db15d73e5f0e ("eeprom: idt_89hpesx: Support both ACPI and OF probing") Cc: Huy Duong <qhuyduong@hotmail.com> Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20210607221757.81465-2-andy.shevchenko@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-09eeprom: idt_89hpesx: Put fwnode in matching case during ->probe()Andy Shevchenko1-0/+1
device_get_next_child_node() bumps a reference counting of a returned variable. We have to balance it whenever we return to the caller. Fixes: db15d73e5f0e ("eeprom: idt_89hpesx: Support both ACPI and OF probing") Cc: Huy Duong <qhuyduong@hotmail.com> Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com> Link: https://lore.kernel.org/r/20210607221757.81465-1-andy.shevchenko@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-09misc: bcm-vk: use list_move_tail instead of list_del/list_add_tail in ↵Baokun Li1-2/+1
bcm_vk_msg.c Using list_move_tail() instead of list_del() + list_add_tail() in bcm_vk_msg.c. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Baokun Li <libaokun1@huawei.com> Link: https://lore.kernel.org/r/20210609071430.1337400-1-libaokun1@huawei.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-09habanalabs/gaudi: remove redundant assignment to variable errColin Ian King1-3/+0
The variable err is being assigned a value that is never read, the assignment is redundant and can be removed. Also remove some empty lines. Reviewed-by: Oded Gabbay <ogabbay@kernel.org> Signed-off-by: Colin Ian King <colin.king@canonical.com> Addresses-Coverity: ("Unused value") Link: https://lore.kernel.org/r/20210603131210.84763-1-colin.king@canonical.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-09misc/pvpanic: Remove some dead-codeChristophe JAILLET1-3/+0
'pvpanic_remove()' is referenced only by a 'devm_add_action_or_reset()' call in 'devm_pvpanic_probe()'. So, we know that its parameter is non-NULL. Axe the unneeded check to save a few lines of code. Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/8e425618f4042a8ab8366be4d34026972e77bd40.1622911768.git.christophe.jaillet@wanadoo.fr Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-04eeprom: ee1004: Remove not needed debug messageHeiner Kallweit1-5/+1
If a user is interested in such transfer statistics he can simply switch on smbus tracing. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Link: https://lore.kernel.org/r/6169f52e-6ede-d7cc-7f8b-cced55b693d0@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-04misc: hpilo: map iLO shared memory by PCI revision idMatt Hsiao2-1/+12
Starting from iLO ASIC 'Neches' with subsystem device id 0x00E4, bar 5 is used for shared memory region mapping instead of bar 2 because bar 2 is made inaccessible after system POST for security reason. As this holds true for future iLO ASIC generations, it does not make sense to map shared memory region according to the subsystem device id of each following generations. Map iLO shared memory region with PCI revision id that maps to the iLO ASIC generation, starting from Neches (Rev 7). Signed-off-by: Matt Hsiao <matt.hsiao@hpe.com> Link: https://lore.kernel.org/r/20210531085551.26421-1-matt.hsiao@hpe.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-31Merge 5.13-rc4 into tty-nextGreg Kroah-Hartman14-128/+134
We need the tty/serial fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-31Merge 5.13-rc4 into driver-core-nextGreg Kroah-Hartman14-128/+134
We need the driver core fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-31Merge 5.13-rc4 into char-misc-nextGreg Kroah-Hartman3-1/+6
We need the char/misc fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-29Merge tag 'char-misc-5.13-rc4' of ↵Linus Torvalds2-1/+5
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver fixes from Greg KH: "Here are some tiny char/misc driver fixes for 5.13-rc4. Nothing huge here, just some tiny fixes for reported issues: - two interconnect driver fixes - kgdb build warning fix for gcc-11 - hgafb regression fix - soundwire driver fix - mei driver fix All have been in linux-next with no reported issues" * tag 'char-misc-5.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: mei: request autosuspend after sending rx flow control kgdb: fix gcc-11 warnings harder video: hgafb: correctly handle card detect failure during probe soundwire: qcom: fix handling of qcom,ports-block-pack-mode interconnect: qcom: Add missing MODULE_DEVICE_TABLE interconnect: qcom: bcm-voter: add a missing of_node_put()
2021-05-27driver core: Drop helper devm_platform_ioremap_resource_wc()Uwe Kleine-König1-2/+4
Since the macro was introduced in 2019 (commit bb6243b4f73d ("drivers: platform: provide devm_platform_ioremap_resource_wc()") there is only a single user which hardly justifies the function for the small task it provides. So drop the helper and open-code it in the only user. Adapt the non-wc case accordingly. For a all-mod-config build on amd64 this change introduces the following changes according to bloat-o-meter: add/remove: 0/1 grow/shrink: 1/0 up/down: 20/-252 (-232) Function old new delta devm_platform_ioremap_resource_wc 252 - -252 sram_probe 796 816 +20 Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20210525103711.956438-1-u.kleine-koenig@pengutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-27mei: request autosuspend after sending rx flow controlAlexander Usyskin1-0/+3
A rx flow control waiting in the control queue may block autosuspend. Re-request autosuspend after flow control been sent to unblock the transition to the low power state. Cc: <stable@vger.kernel.org> Signed-off-by: Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Link: https://lore.kernel.org/r/20210526193334.445759-1-tomas.winkler@intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-27eeprom: ee1004: Add helper ee1004_cleanupHeiner Kallweit1-14/+11
Factor out the cleanup code to a new helper ee1004_cleanup(). Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Link: https://lore.kernel.org/r/9738cbc7-458d-276f-4012-66551f105d90@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-27eeprom: ee1004: Add constant EE1004_NUM_PAGESHeiner Kallweit1-4/+5
Add a constant for the number of pages. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Link: https://lore.kernel.org/r/6167f9c5-995a-03c3-c324-e93e2a6c969b@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-27eeprom: ee1004: Move call to ee1004_set_current_page to ee1004_eeprom_readHeiner Kallweit1-17/+9
Moving the call to ee1004_set_current_page() to ee1004_eeprom_read() allows to simplify the code. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Link: https://lore.kernel.org/r/2829a131-51e3-8865-462a-564080158b0b@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-27eeprom: ee1004: Improve error handling in ee1004_readHeiner Kallweit1-18/+13
Simplify the error handling and make it better readable. No functional change intended. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Link: https://lore.kernel.org/r/13ad7b39-e722-d70a-e25b-03d1fb1734a7@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-27eeprom: ee1004: Factor out setting page to ee1004_set_current_pageHeiner Kallweit1-22/+30
Factor out setting the page, this makes the code better readable. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Link: https://lore.kernel.org/r/21e0966f-e6c9-045f-b130-bd9fb071f0d7@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-27eeprom: ee1004: Cache current page at initialization of first device onlyHeiner Kallweit1-8/+7
The value of ee1004_current_page applies to all SPD eeproms connected to the adapter. Therefore it's sufficient if we set ee1004_current_page when the first device is added. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Link: https://lore.kernel.org/r/b9240e58-08bb-3d71-7a9c-9a323b470ab6@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-27eeprom: ee1004: Switch to i2c probe_new callbackHeiner Kallweit1-3/+2
Switch to the new i2c_driver probe callback version. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Link: https://lore.kernel.org/r/eb5be659-7427-46c5-66c2-b39650e08ea3@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-27eeprom: ee1004: Improve creating dummy devicesHeiner Kallweit1-7/+6
i2c_new_dummy_device() calls i2c_new_client_device() that complains if it fails to create the device. Therefore we don't have to emit an error message in case of failure. In addition ensure that ee1004_set_page is only set if creating the device succeeded. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Link: https://lore.kernel.org/r/d38df5ac-6ecb-7d5f-b5c3-39bfc6a1e8a1@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-27eeprom: ee1004: Improve check for SMBUS featuresHeiner Kallweit1-18/+4
We have to read 512 bytes only, therefore read performance isn't really a concern. Don't bother the user if i2c block read isn't supported. For i2c_smbus_read_i2c_block_data_or_emulated() to work it's sufficient if I2C_FUNC_SMBUS_READ_I2C_BLOCK or I2C_FUNC_SMBUS_READ_BYTE_DATA is supported. Therefore remove the check for I2C_FUNC_SMBUS_READ_WORD_DATA. In addition check for I2C_FUNC_SMBUS_WRITE_BYTE (included in I2C_FUNC_SMBUS_BYTE) which is needed for setting the page. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Link: https://lore.kernel.org/r/840c668e-6310-e933-e50e-5abeaecfb39c@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-27eeprom: ee1004: Remove usage of i2c_adapter_id in adapter comparisonHeiner Kallweit1-2/+1
We can compare the adapter pointers directly instead of using i2c_adapter_id(). Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Link: https://lore.kernel.org/r/99a3f94d-e7ca-e01d-6a78-81e109fde086@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-27eeprom: ee1004: Remove not needed check in ee1004_eeprom_readHeiner Kallweit1-3/+1
i2c_smbus_read_i2c_block_data_or_emulated() checks its length argument, so we don't have to do it. In addition remove the unlikely hint from the checks, we do i2c reads and therefore are in a slow path. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Link: https://lore.kernel.org/r/eb2a8bff-43ec-c763-a417-9d741e6f0034@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-27eeprom: ee1004: Remove not needed check in ee1004_readHeiner Kallweit1-3/+0
sysfs_kf_bin_read() checks this for us already. In addition the function works correctly also w/o this check. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Link: https://lore.kernel.org/r/33889bff-3614-4b73-5010-701635e1edab@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-12 20:28:05 +0300