| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
When device is removed, we need to make sure the F/W won't send us
any more events because during the remove process we disable the
interrupts.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
Need to take the lower 32 bits of the driver's 64-bit idle mask and put
it in the legacy 32-bit variable that the userspace reads to know the
idle mask.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
Driver does not zero some pci counters packets before sending
to FW. This causes an out of sync PI/CI between driver and FW.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
These are persistent, not just for the duration of a dma operation.
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Jérôme Glisse <jglisse@redhat.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: linux-mm@kvack.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-samsung-soc@vger.kernel.org
Cc: linux-media@vger.kernel.org
Cc: Oded Gabbay <oded.gabbay@gmail.com>
Cc: Omer Shpigelman <oshpigelman@habana.ai>
Cc: Ofir Bitton <obitton@habana.ai>
Cc: Tomer Tayar <ttayar@habana.ai>
Cc: Moti Haimovski <mhaimovski@habana.ai>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Pawel Piskorski <ppiskorski@habana.ai>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20201127164131.2244124-5-daniel.vetter@ffwll.ch
|
|
All we need are a pages array, pin_user_pages_fast can give us that
directly. Plus this avoids the entire raw pfn side of get_vaddr_frames.
Note that pin_user_pages_fast is a safe replacement despite the
seeming lack of checking for vma->vm_flasg & (VM_IO | VM_PFNMAP). Such
ptes are marked with pte_mkspecial (which pup_fast rejects in the
fastpath), and only architectures supporting that support the
pin_user_pages_fast fastpath.
Reviewed-by: John Hubbard <jhubbard@nvidia.com>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Jérôme Glisse <jglisse@redhat.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: linux-mm@kvack.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-samsung-soc@vger.kernel.org
Cc: linux-media@vger.kernel.org
Cc: Oded Gabbay <oded.gabbay@gmail.com>
Cc: Omer Shpigelman <oshpigelman@habana.ai>
Cc: Ofir Bitton <obitton@habana.ai>
Cc: Tomer Tayar <ttayar@habana.ai>
Cc: Moti Haimovski <mhaimovski@habana.ai>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Pawel Piskorski <ppiskorski@habana.ai>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20201127164131.2244124-4-daniel.vetter@ffwll.ch
|
|
When using Deep learning framework such as tensorflow or pytorch, there
are tens of thousands of host memory mappings. When the user frees
all those mappings at the same time, the process of unmapping and
unpinning them can take a long time, which may cause a soft lockup
bug.
To prevent this, we need to free the core to do other things during
the unmapping process. For now, we chose to do it every 32K unmappings
(each unmap is a single 4K page).
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
There are some points in the reset process where if the code fails
for some reason, and the system admin tries to initiate the reset
process again we will get a kernel panic.
This is because there aren't any protections in different fini
functions that are called during the reset process.
The protections that are added in this patch make sure that if the fini
functions are called multiple times, without calling init functions
between them, there won't be double release of already released
resources.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
When kzalloc() fails, we should execute hl_mmu_fini()
to release the MMU module. It's the same when
hl_ctx_init() fails.
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
When the device is in reset or needs to be reset, the disabled property
is don't-care.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
We need to make sure our device is idle when rebooting a virtual
machine. This is done in the driver level.
The firmware will later handle FLR but we want to be extra safe and
stop the devices until the FLR is handled.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
Up until now validation errors were counted in the parsing field
of the cs_counters struct, so we added a new counter and increased
it when needed.
In addition, there were some locations where only one of the counters
was updated (ctx or aggregate) so add the second one to be updated
as well.
Signed-off-by: Alon Mizrahi <amizrahi@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
When the firmware security is enabled, the pcie_aux_dbi_reg_addr
register in the PCI controller is blocked. Therefore, ignore
the result of writing to this register and assume it worked. Also
remove the prints on errors in the internal ELBI write function.
If the security is enabled, the firmware is responsible for setting
this register correctly so we won't have any problem.
If the security is disabled, the write will work (unless something
is totally broken at the PCI level and then the whole sequence
will fail).
In addition, remove a write to register pcie_aux_dbi_reg_addr+4,
which was never actually needed.
Moreover, PCIE_DBI registers are blocked to access from host when
firmware security is enabled. Use a different register to flush the
writes.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
Driver must fetch FW hard reset capability at every FW boot stage:
preboot, CPU boot, CPU application.
If hard reset is triggered, driver will take into consideration
only the last capability received.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
hw_queues_mirror was renamed to cs_mirror, so revise accordingly a
comment that refers to this list.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
We don't need to set EB on signal packets from collective slave
queues as it degrades performance. Because the slaves are the network
queues, the engine barrier doesn't actually guarantee that the
packet has been sent.
Signed-off-by: Alon Mizrahi <amizrahi@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
FW hard reset capability indication is now moved to preboot stage.
Driver will check if HW is dirty only after it validated preboot
is up. If HW is dirty, driver will perform a hard reset according
to the FW capability.
In addition, FW defines a new message which driver need to send in
order to initiate a hard reset.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
As we only fetch the CPU_PLL frequency in gaudi, we don't need a
generic get_pll_frequency function which takes a pll index as input
Signed-off-by: Alon Mizrahi <amizrahi@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
Fix a compilation "missing braces around initializer" warning.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
We want the fixes in here, and this resolves a merge issue with
drivers/misc/habanalabs/common/memory.c.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Add a new CB IOCTL opcode that enables a user to query about a CB and
get its usage count.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
Modify the CS counter of a CB to be atomic, so no locking is required
when it is being modified or read.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
hl_cs_sanity_checks() extracts the CS type bits of the CS flags, by
masking out the non-type bits.
To save the need for updating the function whenever new bits for
non-type flags are added, add an explicit mask for the CS type bits.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
Some messages should be changed to debug mode as we want to keep
minimal prints during normal operation of the device.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
If huge range is not valid, driver uses the host range also for
huge page allocations, but driver never frees its allocation.
This introduces a memory leak every time a user closes its context.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
The global CS drop-on-reset counter wasn't updated together with
the context counter.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
add support for user to request a timestamp upon
cs completion.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
We want to indicate to the user that a certain command submission
is finished long time ago and it is no longer in database.
This means no further information regarding this cs can be obtained.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
Once firmware security is enabled, driver must fetch pll frequencies
through the firmware message interface instead of reading the registers
directly.
Signed-off-by: Alon Mizrahi <amizrahi@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
We introduce a new wrapper which allows us to mmu map any size
to any host va_range available. In addition we remove duplicated
code from various places in driver and using this new wrapper
instead.
This wrapper supports mapping only contiguous physical
memory blocks and will be used for mappings that are done to the
driver ASID.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
We have several types of command submissions and the user wants to know
which type of command submission has not finished in time when that
event occurs. This is very helpful for debug.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
F/W message returns 64bit value but up until now we casted it to
a 32bit variable, instead of receiving 64bit in the first place.
Signed-off-by: Alon Mizrahi <amizrahi@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
After the MMU-code refactoring, the existing MMU debugfs operations
are no longer working so we need to fix them.
In addition, remove the duplicate code that was in the debugfs code
and use the already existing MMU-code.
Signed-off-by: Moti Haimovski <mhaimovski@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
Multiple locks are usually a source of problems, which in the MMU
case can be avoided since it is relatively rare that both MMU
tables are updated at the same time.
Therefore, use a single shared lock instead of two separate ones.
Signed-off-by: Moti Haimovski <mhaimovski@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
Add support for reserving va block with alignment different than
page size. This is a pre-requisite for allocations needed in future
ASICs
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
Add log prints for security and eFuse boot error bits
Signed-off-by: Guy Nisan <gnisan@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
During hard-reset, the driver rejects further IOCTL calls and prints
an error message. That error message should be printed with the correct
device instead of using only the control device.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
Driver must fetch FW hard reset capability during boot time,
in order to skip the hard reset flow if necessary.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
Whether an ASIC has MMU towards its DRAM is an ASIC property, so
move it to the asic fixed properties structure.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
Instead of using a dedicated va range for each internal pool,
we introduce a new way for reserving a va block from an existing
va range. This is a more generic way of reserving va blocks for
future use.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
We want to handle the scenario in which the driver was not able
to kill all user processes due to many memory mappings.
We need to retry again after some period while releasing the cores.
The devices will be unusable and "in-reset" status during that time.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
Future command submission types might be submitted to HW not via the
QMAN queues path. However, it would be still required to have the TDR
mechanism for these CS, and thus the patch renames the TDR fields and
replaces the hw_queues_ prefix with cs_.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
Use an array of va_ranges instead of keeping each va_range separately,
we do this for better readability and in order to support access to
a specific range in a much elegant manner.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
Driver must verify if HW is dirty before trying to fetch preboot
information. Hence, we move this validation to a prior stage of
the boot sequence.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
Due to using dma_mmap_coherent() to perform mmap of dma memory, we
had to clear the vm_pgoff field before calling that function.
However, that broke the userspace (profiler tool) as they relied
on searching the /proc/self/maps for these values to correctly
"disassemble" the topology recipe.
To re-enable that functionality, the driver can simply restore the
value of vm_pgoff before returning to userspace but after calling
dma_mmap_coherent().
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
The new state indicates that device should be reset in order
to re-gain funcionality.
This unique state can occur if reset_on_lockup is disabled
and an actual lockup has occurred.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
One of the first steps of a hard reset flow is to close all open user
contexts. This user process teradown might take some time due to long
cleanup in our driver or some other reason even before our cleanup flow.
Hence fix the relevant print and comment to be more accurate.
Signed-off-by: Omer Shpigelman <oshpigelman@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
Current CS jobs are no longer needed after their completion.
However, jobs of future workload might be in use even after they are
completed. To allow that, the patch adds a refcount to the job object,
and decouples its completion handling from its deallocation.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
failure in reading pre-boot verion is not handled correctly,
upon failure we need to reset the device in order to be able
to reinstall the driver.
Signed-off-by: farah kassabri <fkassabri@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
Several header files are repeatedly included in many files.
Move these files to habanalabs.h which is included by all.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
|
As in standard wait cs, we must release a signal fence once
a collective wait cs was dropped and not submitted.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
|
