summaryrefslogtreecommitdiff
path: root/drivers/mfd
AgeCommit message (Collapse)AuthorFilesLines
2019-03-06Merge tag 'armsoc-drivers' of ↵Linus Torvalds2-0/+93
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC driver updates from Arnd Bergmann: "As usual, the drivers/tee and drivers/reset subsystems get merged here, with the expected set of smaller updates and some new hardware support. The tee subsystem now supports device drivers to be attached to a tee, the first example here is a random number driver with its implementation in the secure world. Three new power domain drivers get added for specific chip families: - Broadcom BCM283x chips (used in Raspberry Pi) - Qualcomm Snapdragon phone chips - Xilinx ZynqMP FPGA SoCs One new driver is added to talk to the BPMP firmware on NVIDIA Tegra210 Existing drivers are extended for new SoC variants from NXP, NVIDIA, Amlogic and Qualcomm" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (113 commits) tee: optee: update optee_msg.h and optee_smc.h to dual license tee: add cancellation support to client interface dpaa2-eth: configure the cache stashing amount on a queue soc: fsl: dpio: configure cache stashing destination soc: fsl: dpio: enable frame data cache stashing per software portal soc: fsl: guts: make fsl_guts_get_svr() static hwrng: make symbol 'optee_rng_id_table' static tee: optee: Fix unsigned comparison with less than zero hwrng: Fix unsigned comparison with less than zero tee: fix possible error pointer ctx dereferencing hwrng: optee: Initialize some structs using memset instead of braces tee: optee: Initialize some structs using memset instead of braces soc: fsl: dpio: fix memory leak of a struct qbman on error exit path clk: tegra: dfll: Make symbol 'tegra210_cpu_cvb_tables' static soc: qcom: llcc-slice: Fix typos qcom: soc: llcc-slice: Consolidate some code qcom: soc: llcc-slice: Clear the global drv_data pointer on error drivers: soc: xilinx: Add ZynqMP power domain driver firmware: xilinx: Add APIs to control node status/power dt-bindings: power: Add ZynqMP power domain bindings ...
2019-02-15Merge tag 'arm-soc/for-5.1/drivers' of https://github.com/Broadcom/stblinux ↵Arnd Bergmann2-0/+93
into arm/drivers This pull request contains Broadcom ARM/ARM64/MIPS based SoCs changes for 5.1, please pull the following: - Stefan updates the BCM2835 SoC driver with downstream properties and uses that to implement a reboot notifier to tell the VC4 firmware when Linux on the ARM CPU is rebooting - Eric adds a proper power domain driver for the BCM283x SoCs and updates a bunch of drivers to have a better and clearer Device Tree definition to support power domains/breaking up of functionality. This requires converting the existing watchdog driver into a MFD and then breaking up the functionality into separate drivers and finally updating the DTS files to leverage the power domains information. - Wei provides a fix for making a symbol static * tag 'arm-soc/for-5.1/drivers' of https://github.com/Broadcom/stblinux: ARM: bcm283x: Switch V3D over to using the PM driver instead of firmware. ARM: bcm283x: Extend the WDT DT node out to cover the whole PM block. (v4) soc: bcm: bcm2835-pm: Make local symbol static soc: bcm: Make PM driver default for BCM2835 soc: bcm: bcm2835-pm: Add support for power domains under a new binding. bcm2835-pm: Move bcm2835-watchdog's DT probe to an MFD. dt-bindings: soc: Add a new binding for the BCM2835 PM node. (v4) firmware: raspberrypi: notify VC4 firmware of a reboot soc: bcm2835: sync firmware properties with downstream Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-01-29mfd: Fix unmet dependency warning for MFD_TPS68470Sinan Kaya1-1/+1
After commit 5d32a66541c4 ("PCI/ACPI: Allow ACPI to be built without CONFIG_PCI set") dependencies on CONFIG_PCI that previously were satisfied implicitly through dependencies on CONFIG_ACPI have to be specified directly. WARNING: unmet direct dependencies detected for I2C_DESIGNWARE_PLATFORM Depends on [n]: I2C [=y] && HAS_IOMEM [=y] && (ACPI [=y] && COMMON_CLK [=n] || !ACPI [=y]) Selected by [y]: - MFD_TPS68470 [=y] && HAS_IOMEM [=y] && ACPI [=y] && I2C [=y]=y MFD_TPS68470 is an ACPI only device and selects I2C_DESIGNWARE_PLATFORM. I2C_DESIGNWARE_PLATFORM does not have any configuration today for ACPI support without CONFIG_PCI set. For sake of a quick fix this introduces a new mandatory dependency to the driver which may survive without it. Otherwise we need to revisit the driver architecture to address this properly. Fixes: 5d32a66541c46 ("PCI/ACPI: Allow ACPI to be built without CONFIG_PCI set") Signed-off-by: Sinan Kaya <okaya@kernel.org> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2019-01-14Merge tag 'mfd-next-4.21' of ↵Linus Torvalds19-97/+133
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd Pull MFD updates from Lee Jones: "New Device Support - Add support for Power Supply to AXP813 - Add support for GPIO, ADC, AC and Battery Power Supply to AXP803 - Add support for UART to Exynos LPASS Fix-ups: - Use supplied MACROS; ti_am335x_tscadc - Trivial spelling/whitespace/alignment; tmio, axp20x, rave-sp - Regmap changes; bd9571mwv, wm5110-tables - Kconfig dependencies; MFD_AT91_USART - Supply shared data for child-devices; madera-core - Use new of_node_name_eq() API call; max77620, stmpe - Use managed resources (devm_*); tps65218 - Comment descriptions; ingenic-tcu - Coding style; madera-core Bug Fixes: - Fix section mismatches; twl-core, db8500-prcmu - Correct error path related issues; mt6397-core, ab8500-core, mc13xxx-core - IRQ related fixes; tps6586x - Ensure proper initialisation sequence; qcom_rpm - Repair potential memory leak; cros_ec_dev" * tag 'mfd-next-4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (25 commits) mfd: exynos-lpass: Enable UART module support mfd: mc13xxx: Fix a missing check of a register-read failure mfd: cros_ec: Add commands to control codec mfd: madera: Remove spurious semicolon in while loop mfd: rave-sp: Fix typo in rave_sp_checksum comment mfd: ingenic-tcu: Fix bit field description in header mfd: tps65218: Use devm_regmap_add_irq_chip and clean up error path in probe() mfd: Use of_node_name_eq() for node name comparisons mfd: cros_ec_dev: Add missing mfd_remove_devices() call in remove mfd: axp20x: Add supported cells for AXP803 mfd: axp20x: Re-align MFD cell entries mfd: axp20x: Add AC power supply cell for AXP813 mfd: wm5110: Add missing ASRC rate register mfd: qcom_rpm: write fw_version to CTRL_REG mfd: tps6586x: Handle interrupts on suspend mfd: madera: Add shared data for accessory detection mfd: at91-usart: Add platform dependency mfd: bd9571mwv: Add volatile register to make DVFS work mfd: ab8500-core: Return zero in get_register_interruptible() mfd: tmio: Typo s/use use/use/ ...
2019-01-09soc: bcm: bcm2835-pm: Add support for power domains under a new binding.Eric Anholt1-4/+32
This provides a free software alternative to raspberrypi-power.c's firmware calls to manage power domains. It also exposes a reset line, where previously the vc4 driver had to try to force power off the domain in order to trigger a reset. Signed-off-by: Eric Anholt <eric@anholt.net> Acked-by: Rob Herring <robh@kernel.org> Acked-by: Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
2019-01-09bcm2835-pm: Move bcm2835-watchdog's DT probe to an MFD.Eric Anholt2-0/+65
The PM block that the wdt driver was binding to actually has multiple features we want to expose (power domains, reset, watchdog). Move the DT attachment to a MFD driver and make WDT probe against MFD. Signed-off-by: Eric Anholt <eric@anholt.net> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
2019-01-03mfd: exynos-lpass: Enable UART module supportBeomho Seo1-1/+3
This patch enables proper interrupts routing between UART module in Exynos Audio SubSystem and the rest of the SoC. This routing is completely transparent for UART device and CPU/GIC. UART driver requests interrupts from the respective controller and enables/masks/handles it by itself via standard methods. There are boards (for example TM2), which use UART module in Exynos Audio SubStem for communication with BlueTooth chip. Signed-off-by: Beomho Seo <beomho.seo@samsung.com> [mszyprow: rephrased commit message, added UART reset] Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-01-03mfd: mc13xxx: Fix a missing check of a register-read failureKangjie Lu1-1/+3
When mc13xxx_reg_read() fails, "old_adc0" is uninitialized and will contain random value. Further execution uses "old_adc0" even when mc13xxx_reg_read() fails. The fix checks the return value of mc13xxx_reg_read(), and exits the execution when it fails. Signed-off-by: Kangjie Lu <kjlu@umn.edu> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-01-03mfd: madera: Remove spurious semicolon in while loopRichard Fitzgerald1-1/+1
Coccinelle warning of a spurious semicolon on the closing brace of a while loop. Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-01-03mfd: rave-sp: Fix typo in rave_sp_checksum commentYangtao Li1-1/+1
Caculated -> Calculated Signed-off-by: Yangtao Li <tiny.windzz@gmail.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-01-03mfd: tps65218: Use devm_regmap_add_irq_chip and clean up error path in probe()Keerthy1-21/+3
Use devm_regmap_add_irq_chip and clean up error path in probe and also the remove function. Reported-by: Christian Hohnstaedt <Christian.Hohnstaedt@wago.com> Signed-off-by: Keerthy <j-keerthy@ti.com> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-01-03mfd: Use of_node_name_eq() for node name comparisonsRob Herring2-7/+7
Convert string compares of DT node names to use of_node_name_eq() helper instead. This removes direct access to the node name pointer. Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-01-03mfd: cros_ec_dev: Add missing mfd_remove_devices() call in removeEnric Balletbo i Serra1-0/+1
The driver adds different MFD child devices via mfd_add_devices() and hence it is required to call mfd_remove_devices() to remove MFD child devices. Fixes: 5e0115581bbc ("cros_ec: Move cros_ec_dev module to drivers/mfd") Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-01-03mfd: axp20x: Add supported cells for AXP803Oskari Lemmela1-0/+14
Parts of the AXP803 are compatible with their counterparts on the AXP813. These include the GPIO, ADC, AC and battery power supplies. Signed-off-by: Oskari Lemmela <oskari@lemmela.net> Reviewed-by: Chen-Yu Tsai <wens@csie.org> Tested-by: Vasily Khoruzhick <anarsoul@gmail.com> Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-01-03mfd: axp20x: Re-align MFD cell entriesChen-Yu Tsai1-56/+51
In the axp20x driver, the various mfd_cell lists had varying amounts of indentation, sometimes even within the same list. For the axp288, there's no alignment at all. Re-align the right hand side of the assignments with the least amount of tabs possible. Also collapse the closing bracket and the opening bracket of the next entry onto the same line for the axp288, to be consistent with all the other mfd_cell lists. This patch is whitespace change only. No functionality is modified. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Signed-off-by: Oskari Lemmela <oskari@lemmela.net> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-01-03mfd: axp20x: Add AC power supply cell for AXP813Oskari Lemmela1-0/+5
As axp20x-ac-power-supply now supports AXP813, add a cell for it. Signed-off-by: Oskari Lemmela <oskari@lemmela.net> Reviewed-by: Quentin Schulz <quentin.schulz@bootlin.com> Reviewed-by: Chen-Yu Tsai <wens@csie.org> Tested-by: Vasily Khoruzhick <anarsoul@gmail.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-01-03mfd: wm5110: Add missing ASRC rate registerCharles Keepax1-0/+2
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-01-03mfd: qcom_rpm: write fw_version to CTRL_REGJonathan Marek1-0/+4
This is required as part of the initialization sequence on certain SoCs. If these registers are not initialized, the hardware can be unresponsive. This fixes the driver on apq8060 (HP TouchPad device). Signed-off-by: Jonathan Marek <jonathan@marek.ca> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-01-03mfd: tps6586x: Handle interrupts on suspendJonathan Hunter1-0/+24
The tps6586x driver creates an irqchip that is used by its various child devices for managing interrupts. The tps6586x-rtc device is one of its children that uses the tps6586x irqchip. When using the tps6586x-rtc as a wake-up device from suspend, the following is seen: PM: Syncing filesystems ... done. Freezing user space processes ... (elapsed 0.001 seconds) done. OOM killer disabled. Freezing remaining freezable tasks ... (elapsed 0.000 seconds) done. Disabling non-boot CPUs ... Entering suspend state LP1 Enabling non-boot CPUs ... CPU1 is up tps6586x 3-0034: failed to read interrupt status tps6586x 3-0034: failed to read interrupt status The reason why the tps6586x interrupt status cannot be read is because the tps6586x interrupt is not masked during suspend and when the tps6586x-rtc interrupt occurs, to wake-up the device, the interrupt is seen before the i2c controller has been resumed in order to read the tps6586x interrupt status. The tps6586x-rtc driver sets it's interrupt as a wake-up source during suspend, which gets propagated to the parent tps6586x interrupt. However, the tps6586x-rtc driver cannot disable it's interrupt during suspend otherwise we would never be woken up and so the tps6586x must disable it's interrupt instead. Prevent the tps6586x interrupt handler from executing on exiting suspend before the i2c controller has been resumed by disabling the tps6586x interrupt on entering suspend and re-enabling it on resuming from suspend. Cc: stable@vger.kernel.org Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Reviewed-by: Dmitry Osipenko <digetx@gmail.com> Tested-by: Dmitry Osipenko <digetx@gmail.com> Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-01-03mfd: madera: Add shared data for accessory detectionRichard Fitzgerald1-0/+3
Add variables to struct madera that will be shared by the extcon and audio codec drivers to synchronize output state during accessory detection. Also add a mutex to protect the DAPM pointer. Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-01-03mfd: at91-usart: Add platform dependencyJean Delvare1-0/+1
It doesn't make sense to present option MFD_AT91_USART by default if not building an AT91 kernel, as the drivers which depend on it are not available. Fixes: 7d3aa342cef7 ("mfd: at91-usart: Add MFD driver for USART") Signed-off-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-01-03mfd: bd9571mwv: Add volatile register to make DVFS workDien Pham1-0/+1
Because BD9571MWV_DVFS_MONIVDAC is not defined in the volatile table, the physical register value is not updated by regmap and DVFS doesn't work as expected. Fix it! Fixes: d3ea21272094 ("mfd: Add ROHM BD9571MWV-M MFD PMIC driver") Signed-off-by: Dien Pham <dien.pham.ry@renesas.com> [wsa: rebase, add 'Fixes', reword commit message] Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-01-03mfd: ab8500-core: Return zero in get_register_interruptible()Dan Carpenter1-1/+1
This function is supposed to return zero on success or negative error codes on error. Unfortunately, there is a bug so it sometimes returns non-zero, positive numbers on success. I noticed this bug during review and I can't test it. It does appear that the return is sometimes propogated back to _regmap_read() where all non-zero returns are treated as failure so this may affect run time. Fixes: 47c1697508f2 ("mfd: Align ab8500 with the abx500 interface") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-01-03mfd: mt6397: Do not call irq_domain_remove if PMIC unsupportedNicolas Boichat1-2/+1
If the PMIC ID is unknown, the current code would call irq_domain_remove and panic, as pmic->irq_domain is only initialized by mt6397_irq_init. Return immediately with an error, if the chip ID is unsupported. Signed-off-by: Nicolas Boichat <drinkcat@chromium.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-01-03mfd: db8500-prcmu: Fix some section annotationsNathan Chancellor1-2/+2
When building the kernel with Clang, the following section mismatch warnings appear: WARNING: vmlinux.o(.text+0x7239cc): Section mismatch in reference from the function db8500_prcmu_probe() to the function .init.text:init_prcm_registers() The function db8500_prcmu_probe() references the function __init init_prcm_registers(). This is often because db8500_prcmu_probe lacks a __init annotation or the annotation of init_prcm_registers is wrong. WARNING: vmlinux.o(.text+0x723e28): Section mismatch in reference from the function db8500_prcmu_probe() to the function .init.text:fw_project_name() The function db8500_prcmu_probe() references the function __init fw_project_name(). This is often because db8500_prcmu_probe lacks a __init annotation or the annotation of fw_project_name is wrong. db8500_prcmu_probe should not be marked as __init so remove the __init annotation from fw_project_name and init_prcm_registers. Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2019-01-03mfd: twl-core: Fix section annotations on {,un}protect_pm_masterNathan Chancellor1-2/+2
When building the kernel with Clang, the following section mismatch warning appears: WARNING: vmlinux.o(.text+0x3d84a3b): Section mismatch in reference from the function twl_probe() to the function .init.text:unprotect_pm_master() The function twl_probe() references the function __init unprotect_pm_master(). This is often because twl_probe lacks a __init annotation or the annotation of unprotect_pm_master is wrong. Remove the __init annotation on the *protect_pm_master functions so there is no more mismatch. Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2018-12-13mfd: axp20x: use explicit bit definesOlliver Schinagl1-1/+1
The AXP20X_OFF define is an actual specific bit, define it as such. Signed-off-by: Olliver Schinagl <oliver@schinagl.nl> Signed-off-by: Priit Laes <plaes@plaes.org> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-12-13mfd: axp20x: Clean up included headersOlliver Schinagl1-5/+6
Add the bitops.h header as we need it, alphabetize header order. Signed-off-by: Olliver Schinagl <oliver@schinagl.nl> Signed-off-by: Priit Laes <plaes@plaes.org> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-12-11Merge branch 'for-linus' of ↵Mark Brown1-1/+7
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator into regulator-4.21
2018-12-05Revert "mfd: cros_ec: Use devm_kzalloc for private data"Enric Balletbo i Serra1-1/+7
This reverts commit 3aa2177e47878f7e7616da8a2050c44f22301b6e. That commit triggered a new WARN when unloading the module (see at the end of the commit message). When a class_dev is embedded in a structure then that class_dev is the thing that controls the lifetime of that structure, for that reason device managed allocations can't be used here. See Documentation/kobject.txt. Revert the above patch, so the struct is allocated using kzalloc and we have a release function for it that frees the allocated memory, otherwise it is broken. ------------[ cut here ]------------ Device 'cros_ec' does not have a release() function, it is broken and must be fixed. WARNING: CPU: 3 PID: 3675 at drivers/base/core.c:895 device_release+0x80/0x90 Modules linked in: btusb btrtl btintel btbcm bluetooth ... CPU: 3 PID: 3675 Comm: rmmod Not tainted 4.20.0-rc4 #76 Hardware name: Google Kevin (DT) pstate: 40000005 (nZcv daif -PAN -UAO) pc : device_release+0x80/0x90 lr : device_release+0x80/0x90 sp : ffff00000c47bc70 x29: ffff00000c47bc70 x28: ffff8000e86b0d40 x27: 0000000000000000 x26: 0000000000000000 x25: 0000000056000000 x24: 0000000000000015 x23: ffff8000f0bbf860 x22: ffff000000d320a0 x21: ffff8000ee93e100 x20: ffff8000ed931428 x19: ffff8000ed931418 x18: 0000000000000020 x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000400 x14: 0000000000000143 x13: 0000000000000000 x12: 0000000000000400 x11: 0000000000000157 x10: 0000000000000960 x9 : ffff00000c47b9b0 x8 : ffff8000e86b1700 x7 : 0000000000000000 x6 : ffff8000f7d520b8 x5 : ffff8000f7d520b8 x4 : 0000000000000000 x3 : ffff8000f7d58e68 x2 : ffff8000e86b0d40 x1 : 37d859939c964800 x0 : 0000000000000000 Call trace: device_release+0x80/0x90 kobject_put+0x74/0xe8 device_unregister+0x20/0x30 ec_device_remove+0x34/0x48 [cros_ec_dev] platform_drv_remove+0x28/0x48 device_release_driver_internal+0x1a8/0x240 driver_detach+0x40/0x80 bus_remove_driver+0x54/0xa8 driver_unregister+0x2c/0x58 platform_driver_unregister+0x10/0x18 cros_ec_dev_exit+0x1c/0x2d8 [cros_ec_dev] __arm64_sys_delete_module+0x16c/0x1f8 el0_svc_common+0x84/0xd8 el0_svc_handler+0x2c/0x80 el0_svc+0x8/0xc ---[ end trace a57c4625f3c60ae8 ]--- Cc: stable@vger.kernel.org Fixes: 3aa2177e4787 ("mfd: cros_ec: Use devm_kzalloc for private data") Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Reviewed-by: Guenter Roeck <groeck@chromium.org> Reviewed-by: Dmitry Torokhov <dtor@chromium.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2018-12-03mfd: ti_am335x_tscadc: Use PLATFORM_DEVID_AUTO while registering mfd cellsVignesh R1-2/+3
Use PLATFORM_DEVID_AUTO to number mfd cells while registering, so that different instances are uniquely identified. This is required in order to support registering of multiple instances of same ti_am335x_tscadc IP. Signed-off-by: Vignesh R <vigneshr@ti.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2018-11-15regulator: wm8994: Pass descriptor instead of GPIO numberLinus Walleij1-9/+0
Instead of passing a global GPIO number for the enable GPIO, pass a descriptor looked up from the device tree node or the board file decriptor table for the regulator. There is a single board file passing the GPIOs for LDO1 and LDO2 through platform data, so augment this to pass descriptors associated with the i2c device as well. The special GPIO enable DT property for the enable GPIO is nonstandard but this was accomodated in commit 6a537d48461deacc57c07ed86d9915e5aa4b3539 "gpio: of: Support regulator nonstandard GPIO properties". Cc: patches@opensource.cirrus.com Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com> Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Mark Brown <broonie@kernel.org>
2018-11-01Merge tag 'tag-chrome-platform-for-v4.20' of ↵Linus Torvalds1-6/+7
git://git.kernel.org/pub/scm/linux/kernel/git/bleung/chrome-platform Pull chrome-platform updates from Benson Leung: - Move mfd/cros_ec_lpc* includes to drivers/platform from mfd - Adding a new interrupt path for cros_ec_lpc * tag 'tag-chrome-platform-for-v4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/bleung/chrome-platform: platform/chrome: chromeos_tbmc - Remove unneeded const platform/chrome: Add a new interrupt path for cros_ec_lpc mfd: cros_ec: Fix and improve kerneldoc comments. platform/chrome: Move mfd/cros_ec_lpc* includes to drivers/platform.
2018-10-25Merge tag 'mfd-next-4.20' of ↵Linus Torvalds31-425/+396
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd Pull MFD updates from Lee Jones: "New Drivers - Add support for USART SPI to AT91* New Functionality - Add support for Audio CODECs to motorola-cpcap Fix-ups - DT documentation fix-ups; atmel-usart - Staticise functions/structs; spi-at91-usart, arizona-core - Constify; ti-lmu - Fix memory leaks; menelaus - Change device 'wake-up' status; ti_am335x_tscadc, max8997 - Power Management (suspend/resume) semantic changes; ti_am335x_adc, cros_ec, max8997 - SPDX churn; sec-core (+ headers), max* (+ headers), intel* (+ headers), - Trivial (whitespace, email addresses, alphabetisise); Kconfig, adp5520, intel_soc_pmic_* - Build as module; sec-irq - Use new %pOFn printk format for device_node.name; max77620 - Remove unused code; madera - Use generic MACROs; intel_msic, intel_soc_pmic_crc - Move to GPIOD; ti-lmu - Use managed resources; ti-lmu Bug Fixes - Add missing headers; at91-usart - Prevent device from entering low-power mode; arizona-core - Poll for BOOT_DONE to avoid still-booting NACK; madera-core - Prevent ADC read from shutting down device; mc13xxx-core" * tag 'mfd-next-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (45 commits) mfd: cros_ec: Avoid unneeded internal declaration warning mfd: ti-lmu: Use of_device_get_match_data() helper mfd: ti-lmu: Use managed resource for everything mfd: ti-lmu: Switch to GPIOD mfd: ti-lmu: constify mfd_cell tables mfd: max8997: Disable interrupt handling for suspend/resume cycle mfd: max8997: Enale irq-wakeup unconditionally mfd: arizona: Make array mclk_name static, shrinks object size MAINTAINERS: Add myself as designated reviewer of Intel MFD PMIC mfd: Convert Intel PMIC drivers to use SPDX identifier 1;5201;0c Reduce size of duplicated comments by switching to use SPDX identifier. mfd: Sort headers alphabetically for Intel PMIC drivers mfd: intel_soc_pmic_bxtwc: Chain power button IRQs as well mfd: intel_soc_pmic_crc: Use REGMAP_IRQ_REG() macro mfd: intel_soc_pmic_crc: Use DEFINE_RES_IRQ_NAMED() macro mfd: intel_msic: Use DEFINE_RES_IRQ() macro mfd: motorola-cpcap: Add audio-codec support mfd: mc13xxx-core: Fix PMIC shutdown when reading ADC values mfd: madera: Remove unused forward reference mfd: max77620: Convert to using %pOFn instead of device_node.name mfd: madera: Don't use regmap_read_poll_timeout to poll for BOOT_DONE ...
2018-10-23mfd: cros_ec: Avoid unneeded internal declaration warningNathan Chancellor1-0/+1
Clang warns: drivers/mfd/cros_ec_dev.c:509:40: warning: variable 'cros_ec_id' is not needed and will not be emitted [-Wunneeded-internal-declaration] static const struct platform_device_id cros_ec_id[] = { ^ 1 warning generated. Avoid this warning by adding it to the cros_ec_dev_driver definition under the id_table member like all other platform drivers. Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2018-10-23mfd: ti-lmu: Use of_device_get_match_data() helperPavel Machek1-16/+14
Replace of_match_device() with of_device_get_match_data(), which slightly decreases lines of code and allows to move the DT table next to the I2C table. Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk> Signed-off-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2018-10-23mfd: ti-lmu: Use managed resource for everythingPavel Machek1-13/+8
This replaces all remaining unmanaged resources with device managed ones, so that the remove function is no longer needed. This makes the code slightly shorter and fixes two problems: 1. The hardware is disabled after the child devices have been removed. Previously there was a potential race condition. 2. The hardware is disabled when mfd_add_devices fails during probe. Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk> Signed-off-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2018-10-23mfd: ti-lmu: Switch to GPIODPavel Machek1-16/+12
Use new descriptor based API instead of the legacy one. Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk> Signed-off-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2018-10-23mfd: ti-lmu: constify mfd_cell tablesSebastian Reichel1-7/+7
Add const attribute to all mfd_cell structures. Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk> Signed-off-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2018-10-23mfd: max8997: Disable interrupt handling for suspend/resume cycleMarek Szyprowski1-0/+2
Disable IRQs during suspend/resume cycle to ensure handling of wakeup interrupts (i.e. RTC wake alarm) after max8997_resume(). This way it can be properly handled when I2C bus is finally available. This pattern is also used in other MAX PMIC MFD drivers. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2018-10-23mfd: max8997: Enale irq-wakeup unconditionallyMarek Szyprowski1-7/+1
IRQ wake up support for MAX8997 driver was initially configured by respective property in pdata. However, after the driver conversion to device-tree, setting it was left as 'todo'. Nowadays most of other PMIC MFD drivers initialized from device-tree assume that they can be an irq wakeup source, so enable it also for MAX8997. This fixes support for wakeup from MAX8997 RTC alarm. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2018-10-23mfd: arizona: Make array mclk_name static, shrinks object sizeColin Ian King1-1/+1
Don't populate the array mclk_name on the stack but instead make it static. Makes the object code smaller by 23 bytes: Before: text data bss dec hex filename 38050 11604 64 49718 c236 linux/drivers/mfd/arizona-core.o After: text data bss dec hex filename 38027 11604 64 49695 c21f linux/drivers/mfd/arizona-core.o (gcc version 8.2.0 x86_64) Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2018-10-23mfd: Convert Intel PMIC drivers to use SPDX identifierAndy Shevchenko7-51/+10
1;5201;0c Reduce size of duplicated comments by switching to use SPDX identifier. No functional change. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2018-10-23mfd: Sort headers alphabetically for Intel PMIC driversAndy Shevchenko3-9/+12
Sort headers alphabetically for better maintenance. No functional change. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2018-10-23mfd: intel_soc_pmic_bxtwc: Chain power button IRQs as wellAndy Shevchenko1-10/+31
Power button IRQ actually has a second level of interrupts to distinguish between UI and POWER buttons. Moreover, current implementation looks awkward in approach to handle second level IRQs by first level related IRQ chip. To address above issues, split power button IRQ to be chained as well. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2018-10-23mfd: intel_soc_pmic_crc: Use REGMAP_IRQ_REG() macroAndy Shevchenko1-21/+7
Instead of open coding each data structure with regmap IRQresources, use dedicated macro. No functional change intended. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2018-10-23mfd: intel_soc_pmic_crc: Use DEFINE_RES_IRQ_NAMED() macroAndy Shevchenko1-30/+5
Instead of open coding each data structure with IRQ resources, use dedicated macro. No functional change intended. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2018-10-23mfd: intel_msic: Use DEFINE_RES_IRQ() macroAndy Shevchenko1-34/+10
Instead of open coding each data structure with IRQ resources, use dedicated macro. In one case use DEFINE_RES_IRQ_NAMED() and DEFINE_RES_MEM_NAMED(). No functional change intended. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2018-10-23mfd: motorola-cpcap: Add audio-codec supportSebastian Reichel1-1/+50
Add support for the audio-codec node by converting from devm_of_platform_populate() to devm_mfd_add_devices(). Tested-by: Pavel Machek <pavel@ucw.cz> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk> Signed-off-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Lee Jones <lee.jones@linaro.org>
2018-10-23mfd: mc13xxx-core: Fix PMIC shutdown when reading ADC valuesFabio Estevam1-1/+2
When trying to read any MC13892 ADC channel on a imx51-babbage board: The MC13892 PMIC shutdowns completely. After debugging this issue and comparing the MC13892 and MC13783 initializations done in the vendor kernel, it was noticed that the CHRGRAWDIV bit of the ADC0 register was not being set. This bit is set by default after power on, but the driver was clearing it. After setting this bit it is possible to read the ADC values correctly. Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Tested-by: Chris Healy <cphealy@gmail.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-12 21:31:36 +0300