summaryrefslogtreecommitdiff
path: root/drivers/mfd/wm8350-core.c
AgeCommit message (Collapse)AuthorFilesLines
2009-05-20mfd: Keep a cache of WM8350 volatile valuesMark Brown1-8/+0
Due to the way that the WM8350 audio driver handles CODEC_ENA many of the WM8350 audio registers are marked as volatile when they aren't actually so. Allow the audio driver to see a cache of these values for inspection during interrupt context. To do this we need to stop satisfying any bits from volatile registers from cache - there's no real benefit from doing so anyway, we did the read already. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-04-05mfd: Use the value of the final spin when reading the AUXADCMark Brown1-1/+1
Reverse the order of the tests for loop exit so we use a valid value before we time out. Vanishingly unlikely to happen since we retry for several times the expected conversion time. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2009-04-05mfd: Support active high IRQs on WM835xMark Brown1-1/+15
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2009-04-05mfd: Use bulk read to fill WM8350 register cacheMark Brown1-9/+12
Some I2C controllers have high overheads for setting up I2C operations which makes the register cache setup on startup excessively slow since it does a lot of small transactions. Reduce this overhead by doing a bulk read of the entire register bank and filtering out what we don't need later. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2009-03-13mfd: add support for WM8351 revision BMark Brown1-0/+5
No software visible difference from revision A. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Samuel Ortiz <sameo@openedhand.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-02-17mfd: Ensure all WM8350 IRQs are masked at startupMark Brown1-0/+7
The IRQs might have been left enabled in hardware, generating spurious IRQs before the drivers have registered. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2009-02-17mfd: wm8350 tries reaches -1Roel Kluin1-1/+1
With a postfix decrement tries will reach -1 rather than 0, so the warning will not be issued even upon timeout. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2009-02-17mfd: Improve diagnostics for WM8350 ID register probeMark Brown1-4/+19
Check the return value of the device I/O functions when reading the ID registers so we can provide a more useful diagnostic when we're having trouble talking to the device. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2009-02-17mfd: Initialise WM8350 interrupts earlierMark Brown1-9/+9
Ensure that the interrupt handling is configured before we do platform specific init. This allows the platform specific initialisation to configure things which use interrupts safely. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2009-01-08leds: Add WM8350 LED driverMark Brown1-0/+3
The voltage and current regulators on the WM8350 AudioPlus PMIC can be used in concert to provide a power efficient LED driver. This driver implements support for this within the standard LED class. Platform initialisation code should configure the LED hardware in the init callback provided by the WM8350 core driver. The callback should use wm8350_isink_set_flash(), wm8350_dcdc25_set_mode() and wm8350_dcdc_set_slot() to configure the operating parameters of the regulators for their hardware and then then use wm8350_register_led() to instantiate the LED driver. This driver was originally written by Liam Girdwood, though it has been extensively modified since then. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Richard Purdie <rpurdie@linux.intel.com>
2009-01-04mfd: Add missing break from wm3850-coreMark Brown1-0/+1
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2009-01-04mfd: Add WM8351 supportMark Brown1-0/+47
The WM8351 is a WM8350 variant. As well as register default changes the WM8351 has fewer voltage and current regulators than the WM8350. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2009-01-04mfd: Support configurable numbers of DCDCs and ISINKs on WM8350Mark Brown1-0/+6
Some WM8350 variants have fewer DCDCs and ISINKs. Identify these at probe and refuse to use the absent DCDCs when running on these chips. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2009-01-04mfd: Handle missing WM8350 platform dataMark Brown1-1/+1
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2009-01-04mfd: Add WM8352 supportMark Brown1-16/+70
The WM8352 is a variant of the WM8350. Aside from the register defaults there are no software visible differences to the WM8350. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2009-01-04mfd: Refactor WM8350 chip identificationMark Brown1-17/+37
Since the WM8350 driver was originally written the semantics for the identification registers of the chip have been clarified, allowing us to do an exact match on all the fields. This avoids mistakenly running on unsupported hardware. Also change to using the datasheet names more consistently for legibility and fix a printk() that should be dev_err(). Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2009-01-04mfd: Switch WM8350 revision detection to a feature based modelMark Brown1-4/+2
Rather than check for chip revisions in the WM8350 drivers have the core code set flags for relevant differences. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2009-01-04mfd: Add AUXADC support for WM8350Mark Brown1-1/+50
The auxiliary ADC in the WM8350 is shared between several subdevices so access to it needs to be arbitrated by the core driver. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2009-01-04mfd: Add WM8350 revision H supportMark Brown1-1/+6
No other software changes are required. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2009-01-04mfd: Add some documentation for WM8350 register lockMark Brown1-0/+16
Hopefully this will make the purpose of these functions a bit clearer, it's not immediately obvious that the lock is a hardware feature. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2008-10-22mfd: Don't store volatile bits in WM8350 register cacheMark Brown1-0/+4
This makes the contents of the cache clearer and fixes incorrect initialisation of the cache for partially volatile registers. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2008-10-22mfd: don't export wm3850 static functionsStephen Rothwell1-1/+0
October 10th linux-next build (powerpc allyesconfig) failed like this: drivers/mfd/wm8350-core.c:1131: error: __ksymtab_wm8350_create_cache causes a section type conflict Caused by commit 89b4012befb1abca5e86d232bc0e2a797b0d9825 ("mfd: Core support for the WM8350 AudioPlus PMIC"). wm8350_create_cache is not used elsewhere, so remove the EXPORT_SYMBOL. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2008-10-20mfd: Don't use NO_IRQ in WM8350Mark Brown1-1/+1
NO_IRQ is only defined on some architectures - the general way to test for an invalid IRQ in the modern kernel is by comparing with zero. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2008-10-14mfd: Fix warning in WM8350Mark Brown1-1/+0
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Samuel Ortiz <sameo@openedhand.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2008-10-14mfd: Add placeholders for WM8350 client devicesMark Brown1-2/+16
In order to avoid merge problems further down the line add placeholders for several of the WM8350 client devices and register them, otherwise the patches adding the client devices will all try to update the same code. Also remove redundant checks for null regulator platform devices while we're at it. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Samuel Ortiz <sameo@openedhand.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2008-10-14mfd: Add WM8350 subdevice registration helperMark Brown1-0/+26
Most of the subdevices for the WM8350 code are registered in the same fashion so factor out the code to do the initial registration. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Samuel Ortiz <sameo@openedhand.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2008-10-14regulator: Add WM8350 regulator supportMark Brown1-0/+6
The WM8350 features six DCDC convertors (four buck and two boost), four LDO voltage regulators and two constant current sinks. This driver adds support for these through the regulator API. This driver was written by Liam Girdwood with updates for submission from Mark Brown. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2008-10-14mfd: Add WM8350 interrupt supportMark Brown1-4/+766
The WM8350 has an interrupt line to the CPU which is shared by the devices on the CPU. This patch adds support for the interrupt controller within the WM8350 which identifies which identifies the interrupt cause. In common with other similar chips this is done outside the standard interrupt framework due to the need to access the interrupt controller over an interrupt-driven bus. This code was all originally written by Liam Girdwood with updates for submission by me. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Samuel Ortiz <sameo@openedhand.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2008-10-14mfd: Add initialisation callback for WM8350Mark Brown1-1/+11
Some functions of the WM8350 require board-specific initialisation on startup. Provide a callback to the WM8350 driver in platform data for platforms to use to configure the chip. Use of a callback allows platforms to control the ordering of initialisation which can be important. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Samuel Ortiz <sameo@openedhand.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2008-10-14mfd: Core support for the WM8350 AudioPlus PMICMark Brown1-0/+456
The WM8350 is an integrated audio and power management subsystem intended for use as the primary PMIC in mobile multimedia applications. The WM8350 can be controlled via either I2C or SPI - the control interface is provided by a separate module in order to allow greatest flexibility in configuring the kernel. This driver was originally written by Liam Girdwood and has since been updated to current kernel APIs and split up for submission by me. All the heavy lifting here was done by Liam. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Samuel Ortiz <sameo@openedhand.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-21 22:24:00 +0300