summaryrefslogtreecommitdiff
path: root/drivers/message
AgeCommit message (Collapse)AuthorFilesLines
2005-09-21[PATCH] Fix I2O config-osm init to return proper errorDeepak Saxena1-1/+4
We currently unregister the config-osm driver if initialization of the legacy ioctl() handlers failed but still return success. We should be returning -EBUSY in this case. Signed-off-by: Deepak Saxena <dsaxena@plexity.net> Cc: Markus Lidel <Markus.Lidel@shadowconnect.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-19[SCSI] fusion SAS support (mptsas driver) minor fixMoore, Eric Dean2-1/+1
On Thursday, September 15, 2005 6:22 AM, Christoph Hellwig wrote: > Looks good to me, except for the spurious scsi_print_command prototype > in mptscsih.h. The attached patch addresses that concern. Signed-off-by: Eric Moore <Eric.Moore@lsil.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-09-19[SCSI] fusion SAS support (mptsas driver) updatesMoore, Eric Dean9-400/+549
Summary of Changes: * splitting mpt_interrupt per Christophs suggestion about a month ago * rename ScsiCfgData to SpiCfgData structure, then move all the raid related info into new structure called RaidCfgData. This is done because SAS supports RAID, as well as SPI, so the raid stuff should be seperate. * incorrect timeout calculation for cntdn inside WaitForDoorbellAck and WaitForDoortbellInt * add support for interpreting SAS Log Info * Increase Event Log Size from 0xA to 0x32 * Fix bug in mptsas/mptfc/mptspi - when controller has Initiator Mode Disabled, and only running in TargetMode, the mptctl would panic when loading. The fix is to return 0, instead of -ENODEV, in SCSI LLD respective probe routines * Fix bug in mptlan.c - driver will panic if there is host reset, due to dev being set to zero in mpt_lan_ioc_reset * Fix's for SPI - Echo Buffer * Several fix's in mptscsih_io_done - FCP Response info, RESIDUAL_MISMATCH, Data Underrun, etc. * Cleanup Error Handling - EH handlers, mptscsih_flush_cmds, and zeroing out ScsiLookup from mptscsih_qcmd * Cleanup asyn event handling from mptscsih -> mptscsih_event_process. Also added support for SAS Persistent Table Full, an asyn event Signed-off-by: Eric Moore <Eric.Moore@lsil.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-09-19[SCSI] fusion SAS support (mptsas driver)Christoph Hellwig3-0/+1253
Adds the actual mptsas driver, based upon the LSI driver with new work for SAS transport class integration from Eric Moore and me. This obviously depends on the SAS transport class. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-09-19[SCSI] fusion core changes for SAS supportChristoph Hellwig3-87/+472
- various bits for SAS support from the LSI driver. - use the device private data for the fusion target private data. this should be using the midlayer target data framework, but we can't move over to that until fusion has been switched to the generic DV code - use target ID and channel from the fusion target private data, because those in scsi_device will be different for mptsas Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-09-07Merge by hand (conflicts in sd.c)James Bottomley11-259/+686
2005-09-05[SCSI] fusion: whitespace fixesChristoph Hellwig3-155/+174
Acked by: Moore, Eric Dean <Eric.Moore@lsil.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-09-05[SCSI] fusion: endianess fixesChristoph Hellwig3-16/+16
Assorted endianess fixes. I'll work on full endianess annotations later. Acked by: Moore, Eric Dean <Eric.Moore@lsil.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-09-05[SCSI] fusion: update LSI headersChristoph Hellwig6-44/+415
Acked by: Moore, Eric Dean <Eric.Moore@lsil.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-09-05[SCSI] fusion: extended config header supportChristoph Hellwig4-44/+81
Acked by: Moore, Eric Dean <Eric.Moore@lsil.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-08-10[PATCH] I2O: added pci_request_regions() before using the controllerMarkus Lidel1-0/+10
Added pci_request_regions() before using the controller to avoid duplicate usage of the I2O controller when the dpt_i2o driver and I2O subsystem is loaded at the same time. Signed-off-by: Markus Lidel <Markus.Lidel@shadowconnect.com> Cc: James Bottomley <James.Bottomley@SteelEye.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-08-09[PATCH] i2o: remove new configuration APIMarkus Lidel2-494/+3
Remove new configuration API from i2o_config The API-patch is still available from the I2O website (which is mentioned in the kernel config now). It is removed because it creates a new binary sysfs-attribute, which doesn't have the limitiation of 4k. Expect for the Adaptec controllers, which has a limitation in the hardware this attribute doesn't make sense anywhere else. Until the sysfs API provides an attribute which doesn't buffer (like firmware) and let access to at least 64k blocks i provide a separate patch... (akpm: basically, this API was introduced post-2.6.12 and Markus wants to pull it out before 2.6.13). Signed-off-by: Markus Lidel <Markus.Lidel@shadowconnect.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-27Merge master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-for-linus-2.6Linus Torvalds4-63/+24
2005-07-08[PATCH] pm: more u32 vs. pm_message_t fixesPavel Machek2-14/+2
Few more u32 vs. pm_message_t fixes. Signed-off-by: Pavel Machek <pavel@suse.cz> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-08[PATCH] i2o: config-osm build fixAndrew Morton1-0/+2
Various stuff missing on alpha: drivers/message/i2o/config-osm.c:35: error: field `fops' has incomplete type drivers/message/i2o/config-osm.c: In function `sysfs_create_fops_file': drivers/message/i2o/config-osm.c:71: error: storage size of `tmp' isn't known drivers/message/i2o/config-osm.c:78: error: dereferencing pointer to incomplete type drivers/message/i2o/config-osm.c:81: error: dereferencing pointer to incomplete type Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-01[SCSI] - mptfusion - convert to new change_queue_depth APIMoore, Eric Dean4-55/+24
Convert driver to use new change_queue_depth API. Signed-off-by: Eric Moore <Eric.Moore@lsil.com> Fixed up rejections and Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-06-28[PATCH] PCI: make drivers use the pci shutdown callback instead of the ↵Greg Kroah-Hartman4-12/+8
driver core callback. Now we can change the pci core to always set this pointer, as pci drivers should use it, not the driver core callback. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-26[SCSI] remove scsi_set_deviceChristoph Hellwig2-8/+0
scsi_add_host is the proper place to set the device, but people copy the scsi_set_device usage from older drivers again and again. note that this leaves some legacy drivers like qlogicisp/qlogicfc without pci association in sysfs, but they're scheduled to go away soon anyway. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-06-24[PATCH] tpm: device attribute fixesYani Ioannou2-3/+3
This patch updates all the device attribute callbacks that weren't updated with the new parameter, I guess because they weren't in Greg's tree (including drivers/pcmcia/ds.c). Without the patch these callbacks are probably broken (and generate a warning along the lines of "assignment from incompatible pointer type"). Please see http://lkml.org/lkml/2005/5/19/40 for the scripts I used to update the attributes automatically. Signed-off-by: Yani Ioannou <yani.ioannou@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-24[PATCH] i2o build fixAndrew Morton3-3/+6
LD .tmp_vmlinux1 drivers/built-in.o: In function `i2o_cfg_parms': config-osm.c:(.text+0x12764a): undefined reference to `i2o_parm_issue' Cc: Markus Lidel <Markus.Lidel@shadowconnect.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-24[PATCH] I2O: Limit max sector workaround for Promise controllersMarkus Lidel1-0/+1
Set max sectors to 256 for Promise controllers. Signed-off-by: Markus Lidel <Markus.Lidel@shadowconnect.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-24[PATCH] I2O: Lindent run and replacement of printk through osm printing ↵Markus Lidel10-106/+96
functions Lindent run and replaced printk() through the corresponding osm_*() function Signed-off-by: Markus Lidel <Markus.Lidel@shadowconnect.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-24[PATCH] I2O: second code cleanup of sparse warnings and unneeded syncronizationMarkus Lidel10-261/+233
Changes: - Added header "core.h" for i2o_core.ko internal definitions - More sparse fixes - Changed display of TID's in sysfs attributes from XXX to 0xXXX - Use the right functions for accessing I/O and normal memory - Removed error handling of SCSI device errors and let the SCSI layer take care of it - Added new device / removed device handling to SCSI-OSM - Make status access volatile - Cleaned up activation of I2O controller - Removed unnecessary wmb() and rmb() calls - Use own struct i2o_io for I/O memory instead of struct i2o_dma Signed-off-by: Markus Lidel <Markus.Lidel@shadowconnect.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-24[PATCH] I2O: Adaptec specific SG_IO access, firmware access through sysfs ↵Markus Lidel5-105/+208
and 2400A workaround Changes: - Provide SG_IO access to BLOCK and EXECUTIVE class on Adaptec controllers - Use PRIVATE messages in SCSI-OSM because on some controllers normal SCSI class commands like READ or READ CAPACITY cause errors - Use new DMA and SG list creation function - Added workaround to limit sectors per request for Adaptec 2400A controllers Signed-off-by: Markus Lidel <Markus.Lidel@shadowconnect.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-24[PATCH] I2O: new sysfs attributes and Adaptec specific block device access ↵Markus Lidel13-475/+1176
and 64-bit DMA support Changes: - Added Bus-OSM which could be used by user space programs to reset a channel on the controller - Make ioctl's in Config-OSM obsolete in prefer for sysfs attributes and move those to its own file - Added sysfs attribute for firmware read and write access for I2O controllers - Added special handling of firmware read and write access for Adaptec controllers - Added vendor id and product id as sysfs-attribute to Executive classes - Added automatic notification of LCT change handling to Exec-OSM - Added flushing function to Block-OSM for later barrier implementation - Use PRIVATE messages for Block access on Adaptec controllers, which are faster then BLOCK class access - Cleaned up support for Promise controller - New messages are now detected using the IRQ status register as suggested by the I2O spec - Added i2o_dma_high() and i2o_dma_low() functions - Added facility for SG tablesize calculation when using 32-bit and 64-bit DMA addresses - Added i2o_dma_map_single() and i2o_dma_map_sg() which could build the SG list for 32-bit as well as 64-bit DMA addresses Signed-off-by: Markus Lidel <Markus.Lidel@shadowconnect.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-24[PATCH] I2O: first code cleanup of spare warnings and unused functionsMarkus Lidel9-278/+340
Changes: - Removed unnecessary checking of NULL before calling kfree() - Make some functions static - Changed pr_debug() into osm_debug() - Use i2o_msg_in_to_virt() for getting a pointer to the message frame - Cleaned up some comments - Changed some le32_to_cpu() into readl() where necessary - Make error messages of OSM's look the same - Cleaned up error handling in i2o_block_end_request() - Removed unused error handling of failed messages in Block-OSM, which are not allowed by the I2O spec - Corrected the blocksize detection in i2o_block - Added hrt and lct sysfs-attribute to controller - Call done() function in SCSI-OSM after freeing DMA buffers - Removed unneeded variable for message size calculation in i2o_scsi_queuecommand() - Make some changes to remove sparse warnings - Reordered some functions - Cleaned up controller initialization - Replaced some magic numbers by defines - Removed unnecessary dma_sync_single_for_cpu() call on coherent DMA - Removed some unused fields in i2o_controller and removed some unused functions Signed-off-by: Markus Lidel <Markus.Lidel@shadowconnect.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-24[PATCH] I2O: bugfixes and compability enhancementsMarkus Lidel6-136/+116
Changes: - Fixed sysfs bug where user and parent links where added to the I2O device itself - Fixed bug when calculating TID for the event handler and cleaned up the workflow of i2o_driver_dispatch() - Fixed oops when no I2O device could be found for an event delivered to Exec-OSM - Fixed initialization of spinlock in Exec-OSM - Fixed memory leak in i2o_cfg_passthru() and i2o_cfg_passthru() - Removed MTRR support - Added PCI ID of Promise SX6000 with firmware >= 1.20.x.x - Turn of caching for ioremapped memory of in_queue - Added initialization sequence for Promise controllers - Moved definition of u8 / u16 / u32 for raidutils before first use Signed-off-by: Markus Lidel <Markus.Lidel@shadowconnect.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-21[PATCH] Driver Core: drivers/i2c/chips/w83781d.c - ↵Yani Ioannou2-2/+2
drivers/s390/block/dcssblk.c: update device attribute callbacks Signed-off-by: Yani Ioannou <yani.ioannou@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-18merge by hand (fix up qla_os.c merge error)James Bottomley25-1420/+3294
2005-06-17[SCSI] allow sleeping in ->eh_host_reset_handler()Jeff Garzik1-4/+0
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-06-17[SCSI] allow sleeping in ->eh_bus_reset_handler()Jeff Garzik1-2/+1
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-06-17[SCSI] allow sleeping in ->eh_device_reset_handler()Jeff Garzik1-5/+1
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-06-17[SCSI] allow sleeping in ->eh_abort_handler()Jeff Garzik1-5/+0
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-06-14[PATCH] i2o: Fix free of event memory in i2o_block_event()Markus Lidel1-0/+1
Fixed freeing of event memory in i2o_block_event() Signed-off-by: Markus Lidel <Markus.Lidel@shadowconnect.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-21[SCSI] fusion - bump driver version to 3.03.02Moore, Eric Dean1-2/+2
Bump driver version to 3.03.02 Signed-off-by: Eric Moore <Eric.Moore@lsil.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-05-21[SCSI] fusion - mpi headers version 1.5.9Moore, Eric Dean13-409/+1889
This patch contains update for mpi headers 1.5.9. Signed-off-by: Eric Moore <Eric.Moore@lsil.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-05-21[SCSI] fusion-kconfig-cleanupMoore, Eric Dean1-8/+7
* This patch clarifies help section in FUSION_MAX_SGE entry. Signed-off-by: Eric Moore <Eric.Moore@lsil.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-05-21[SCSI] fusion-kfree-cleanupMoore, Eric Dean4-39/+27
This patch is originally From: Jesper Juhl <juhl-lkml@dif.dk> This patch gets rid of redundant NULL checks prior to calling kfree() in drivers/message/* There are also a few small whitespace changes in there. Signed-off-by: Eric Moore <Eric.Moore@lsil.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-05-21[SCSI] fusion - Adding pci recog support for Fibre 949X and 939X chipsMoore, Eric Dean3-1/+51
* adding pci id support for new Fibre chips, 949X and 939X * adding errata workaround - disabling PIO access except during fwdlb. Signed-off-by: Eric Moore <Eric.Moore@lsil.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-05-20[SCSI] mptfusion: fix panic loading driver statically compiledMoore, Eric Dean5-24/+15
Adjust link ordering in the Makefile. Also, the ioc->DoneCtx handles for mptspi/mptfc in the message frame. And I'm now not seeing the panic. Signed-off-by: Eric Moore <Eric.Moore@lsil.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-05-20[SCSI] mptfusion: correct Kconfig problemJames Bottomley1-0/+6
The fusion Kconfig forgets to set CONFIG_FUSION, which is required to get the upper makefile to descend into the fusion directory. Add this back as a variable and make the two upper level modules select it. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-05-20[SCSI] mptfusion: mptfc Adding Stub Driver - Fiber ChannelMoore, Eric Dean1-0/+428
(1) mptfc.c: This driver is having module_init, module_exit, and probe. (2) mptfc.c: Registering for Fibre Channel pci ids are done from this module. (3) mptfc.c: Convert MODULE_PARM to module_param Signed-off-by: Eric Moore <Eric.Moore@lsil.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-05-20[SCSI] mptfusion: mptspi Adding Stub Driver - SCSI ParallelMoore, Eric Dean1-0/+487
(1) mptspi.c: This driver is having module_init, module_exit, and probe. (2) mptspi.c: Registering for SCSI pci ids are done from this module. (3) mptspi.c: Convert MODULE_PARM to module_param Signed-off-by: Eric Moore <Eric.Moore@lsil.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-05-20[SCSI] mptfusion: mptscsih Split driver supportMoore, Eric Dean2-610/+211
(1) mptscsih.c: Remove credits, -sralston references , update copyright (2) mptscsih.c: split driver support (3) mptscsih.c: module_init, module_exit, and probe routines moved to new stub drivers, mptfc and mptspi (4) mptscsih.c: some global parameters are moved to MPT_SCSI_HOST (5) mptscsih.c: removed scsi_device_online check. Signed-off-by: Eric Moore <Eric.Moore@lsil.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-05-20[SCSI] mptfusion: mptlan Remove credits and update copyrightMoore, Eric Dean2-29/+52
(1) mptlan.c: Remove credits and update copyright (2) mptlan.c: Remove -sralston references Signed-off-by: Eric Moore <Eric.Moore@lsil.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-05-20[SCSI] mptfusion: mptctl Remove credits and update copyrightMoore, Eric Dean2-51/+10
(1) mptctl.c: Remove credits and update copyright (2) mptctl.c: cleanup in get_iocinfo Signed-off-by: Eric Moore <Eric.Moore@lsil.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-05-20[SCSI] mptfusion: mptbase cleanup, split driver support, DMA 32_BIT_MASKMoore, Eric Dean2-215/+90
(1) mptbase.c: Move registering pci ids to scsi lld drivers (2) mptbase.c: Use the DMA_32BIT_MASK constant (3) mptbase.c: Fix for multiple pci domains (4) mptbase.c: Remove le32 conversion from BlockSize, which was u8 size (5) mptbase.c: Remove credits, -sralston references , update copyright (6) mptbase.c: split driver support Signed-off-by: Eric Moore <Eric.Moore@lsil.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-05-20[SCSI] mptfusion: Kconfig Adding new bus type drivers for fusion drivers.Moore, Eric Dean2-44/+45
(1) Kconfig - added new mptspi and mptfc scsi lld drivers (2) Kconfig - increased MAX_SGE from 40 to 128 (2) Makefile - compilation support for split drivers (3) Makefile - cleaned up debug defines; e.g. removed obsolete, added others Signed-off-by: Eric Moore <Eric.Moore@lsil.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-04-18[PATCH] Convert i2o to compat_ioctl1-14/+27
Also broken design in its compat handlers - CONFIG_COMPAT doesn't mean that there should be no native ioctls. Signed-off-by: Andi Kleen <ak@muc.de> Reworked with comments from Markus Lidel by: Christoph Hellwig <hch@infradead.org> Rejections fixed and Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-04-17[PATCH] fix u32 vs. pm_message_t in drivers/messagePavel Machek3-4/+4
This fixes u32 vs. pm_message_t in drivers/message. Signed-off-by: Pavel Machek <pavel@suse.cz> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-30 14:52:30 +0300