summaryrefslogtreecommitdiff
path: root/drivers/media
AgeCommit message (Collapse)AuthorFilesLines
2024-08-31media: i2c: mt9v111: Enable module autoloadingLiao Chen1-0/+1
Add MODULE_DEVICE_TABLE(), so modules could be properly autoloaded based on the alias from of_device_id table. Signed-off-by: Liao Chen <liaochen4@huawei.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2024-08-31media: imx335: Fix reset-gpio handlingUmang Jain1-5/+4
Rectify the logical value of reset-gpio so that it is set to 0 (disabled) during power-on and to 1 (enabled) during power-off. Set the reset-gpio to GPIO_OUT_HIGH at initialization time to make sure it starts off in reset. Also drop the "Set XCLR" comment which is not-so-informative. The existing usage of imx335 had reset-gpios polarity inverted (GPIO_ACTIVE_HIGH) in their device-tree sources. With this patch included, those DTS will not be able to stream imx335 anymore. The reset-gpio polarity will need to be rectified in the device-tree sources as shown in [1] example, in order to get imx335 functional again (as it remains in reset prior to this fix). Cc: stable@vger.kernel.org Fixes: 45d19b5fb9ae ("media: i2c: Add imx335 camera sensor driver") Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://lore.kernel.org/linux-media/20240729110437.199428-1-umang.jain@ideasonboard.com/ Signed-off-by: Umang Jain <umang.jain@ideasonboard.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2024-08-31media: i2c: og01a1b: Add management of optional sensor supply linesVladimir Zapolskiy1-1/+80
Omnivision OG01A1B camera sensor is supplied by three power rails, if supplies are present as device properties, include them into sensor power up sequence. Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2024-08-31media: i2c: og01a1b: Add management of optional reset GPIOVladimir Zapolskiy1-1/+16
Omnivision OG01A1B camera sensor may have a connected active low GPIO to XSHUTDOWN pad, and if so, include it into sensor power up sequence. Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2024-08-31media: i2c: og01a1b: Add support of xvclk supply clock in power managementVladimir Zapolskiy1-6/+40
The OmniVision OG01A1B camera sensor has an xvclk supply clock, which could be described and then explicitly controlled on OF platforms. Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org> [Sakari Ailus: Use UL specifier for power-up delay cycle value.] Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2024-08-31media: i2c: og01a1b: Add stubs of runtime power management functionsVladimir Zapolskiy1-9/+33
Rearrange initializations and checks in probe before population of the power management functions. Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2024-08-31media: i2c: og01a1b: Add OF support to the image sensor driverVladimir Zapolskiy1-0/+7
The OmniVision OG01A1B image sensor driver currently supports probing only on ACPI platforms, the changes adds support of OF platforms to the driver. Signed-off-by: Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2024-08-31media: siano: Remove unused declarationsYue Haibing1-6/+0
There is no caller and implementation in tree, so can remove them. Signed-off-by: Yue Haibing <yuehaibing@huawei.com> Reviewed-by: Ricardo Ribalda <ribalda@chromium.org> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2024-08-31media: ccs: Remove unused declarationsYue Haibing1-3/+0
Commit 2989a457171d ("media: ccs: Refactor register reading a little") removed ccs_read_addr_no_quirk() but left declaration. Commit 529322112a3b ("media: ccs: Use V4L2 CCI for accessing sensor registers") removed ccs_write_addr_no_quirk() and ccs_reg_width() but leave their declarations. Signed-off-by: Yue Haibing <yuehaibing@huawei.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2024-08-31media: i2c: ar0521: Use cansleep version of gpiod_set_value()Alexander Shiyan1-2/+3
If we use GPIO reset from I2C port expander, we must use *_cansleep() variant of GPIO functions. This was not done in ar0521_power_on()/ar0521_power_off() functions. Let's fix that. ------------[ cut here ]------------ WARNING: CPU: 0 PID: 11 at drivers/gpio/gpiolib.c:3496 gpiod_set_value+0x74/0x7c Modules linked in: CPU: 0 PID: 11 Comm: kworker/u16:0 Not tainted 6.10.0 #53 Hardware name: Diasom DS-RK3568-SOM-EVB (DT) Workqueue: events_unbound deferred_probe_work_func pstate: 80400009 (Nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : gpiod_set_value+0x74/0x7c lr : ar0521_power_on+0xcc/0x290 sp : ffffff8001d7ab70 x29: ffffff8001d7ab70 x28: ffffff80027dcc90 x27: ffffff8003c82000 x26: ffffff8003ca9250 x25: ffffffc080a39c60 x24: ffffff8003ca9088 x23: ffffff8002402720 x22: ffffff8003ca9080 x21: ffffff8003ca9088 x20: 0000000000000000 x19: ffffff8001eb2a00 x18: ffffff80efeeac80 x17: 756d2d6332692f30 x16: 0000000000000000 x15: 0000000000000000 x14: ffffff8001d91d40 x13: 0000000000000016 x12: ffffffc080e98930 x11: ffffff8001eb2880 x10: 0000000000000890 x9 : ffffff8001d7a9f0 x8 : ffffff8001d92570 x7 : ffffff80efeeac80 x6 : 000000003fc6e780 x5 : ffffff8001d91c80 x4 : 0000000000000002 x3 : 0000000000000000 x2 : 0000000000000000 x1 : 0000000000000000 x0 : 0000000000000001 Call trace: gpiod_set_value+0x74/0x7c ar0521_power_on+0xcc/0x290 ... Signed-off-by: Alexander Shiyan <eagle.alexander923@gmail.com> Fixes: 852b50aeed15 ("media: On Semi AR0521 sensor driver") Cc: stable@vger.kernel.org Acked-by: Krzysztof Hałasa <khalasa@piap.pl> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2024-08-31media: intel/ipu6: make use of dev_err_cast_probe()Hongbo Li1-12/+8
Using dev_err_cast_probe() to simplify the code. No functional change. Signed-off-by: Hongbo Li <lihongbo22@huawei.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2024-08-31media: ov5675: Fix power on/off delay timingsBryan O'Donoghue1-6/+6
The ov5675 specification says that the gap between XSHUTDN deassert and the first I2C transaction should be a minimum of 8192 XVCLK cycles. Right now we use a usleep_rage() that gives a sleep time of between about 430 and 860 microseconds. On the Lenovo X13s we have observed that in about 1/20 cases the current timing is too tight and we start transacting before the ov5675's reset cycle completes, leading to I2C bus transaction failures. The reset racing is sometimes triggered at initial chip probe but, more usually on a subsequent power-off/power-on cycle e.g. [ 71.451662] ov5675 24-0010: failed to write reg 0x0103. error = -5 [ 71.451686] ov5675 24-0010: failed to set plls The current quiescence period we have is too tight. Instead of expressing the post reset delay in terms of the current XVCLK this patch converts the power-on and power-off delays to the maximum theoretical delay @ 6 MHz with an additional buffer. 1.365 milliseconds on the power-on path is 1.5 milliseconds with grace. 85.3 microseconds on the power-off path is 90 microseconds with grace. Fixes: 49d9ad719e89 ("media: ov5675: add device-tree support and support runtime PM") Cc: stable@vger.kernel.org Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Tested-by: Johan Hovold <johan+linaro@kernel.org> Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de> Tested-by: Quentin Schulz <quentin.schulz@cherry.de> # RK3399 Puma with Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2024-08-31media: i2c: imx355: Parse and register propertiesRobert Mader1-1/+11
Analogous to e.g. the imx219 driver. This enables propagating the V4L2_CID_CAMERA_SENSOR_ROTATION and V4L2_CID_CAMERA_ORIENTATION values so that userspace - e.g. libcamera - can detect the correct rotation and orientation from the device tree. Signed-off-by: Robert Mader <robert.mader@collabora.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2024-08-31media: i2c: max96714: coding style fixesJulien Massot1-9/+9
Coding style fixes suggested by Sakari during the driver review. Reviewed-by: Tommaso Merciai <tomm.merciai@gmail.com> Tested-by: Tommaso Merciai <tomm.merciai@gmail.com> Signed-off-by: Julien Massot <julien.massot@collabora.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2024-08-31media: i2c: max96717: coding style fixesJulien Massot1-19/+12
Coding style fixes suggested by Sakari during the driver review. Signed-off-by: Julien Massot <julien.massot@collabora.com> Reviewed-by: Tommaso Merciai <tomm.merciai@gmail.com> Tested-by: Tommaso Merciai <tomm.merciai@gmail.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2024-08-31media: i2c: max96717: add test pattern ctrlTommaso Merciai1-16/+197
Add v4l2 test pattern control. Signed-off-by: Tommaso Merciai <tomm.merciai@gmail.com> Reviewed-by: Julien Massot <julien.massot@collabora.com> Tested-by: Julien Massot <julien.massot@collabora.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2024-08-31media: tc358746: Move clk_prepare to its own functionRicardo Ribalda1-1/+11
Smatch is very confused by a clk_prepare_enable() being called in an error-path. Fix this warning by moving the clk_prepare_enable() to its own function. drivers/media/i2c/tc358746.c:1631 tc358746_suspend() warn: 'tc358746->refclk' from clk_prepare_enable() not released on lines: 1631. Signed-off-by: Ricardo Ribalda <ribalda@chromium.org> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2024-08-31media: i2c: s5c73m3: Move clk_prepare to its own functionRicardo Ribalda1-1/+12
Smatch is very confused by a clk_prepare_enable() being called in an error-path. Fix this warning by moving the clk_prepare_enable() to its own function. drivers/media/i2c/s5c73m3/s5c73m3-core.c:1425 __s5c73m3_power_off() warn: 'state->clock' from clk_prepare_enable() not released on lines: 1425. Signed-off-by: Ricardo Ribalda <ribalda@chromium.org> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2024-08-31media: i2c: ov5645: Refactor ov5645_set_power_off()Ricardo Ribalda1-3/+12
Factor out all the power off logic, except clk_disable_unprepare(), to a new function __ov5645_set_power_off(). This allows ov5645_set_power_on() to excplicitly clean-out the clock during the error-path. The following smatch warning is fixed: drivers/media/i2c/ov5645.c:690 ov5645_set_power_on() warn: 'ov5645->xclk' from clk_prepare_enable() not released on lines: 690. Signed-off-by: Ricardo Ribalda <ribalda@chromium.org> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2024-08-31media: ar0521: Refactor ar0521_power_off()Ricardo Ribalda1-4/+13
Factor out all the power off logic, except the clk_disable_unprepare(), to a new function __ar0521_power_off(). This allows ar0521_power_on() to explicitly clean-out the clock during the error-path. The following smatch warning is fixed: drivers/media/i2c/ar0521.c:912 ar0521_power_on() warn: 'sensor->extclk' from clk_prepare_enable() not released on lines: 912. Signed-off-by: Ricardo Ribalda <ribalda@chromium.org> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2024-08-31media: imx283: Add 3/3 binning modeUmang Jain1-0/+33
IMX283 supports 12-bit 3/3 binning mode with 1824x1216 resolution. Introduce the mode config for the same. Signed-off-by: Umang Jain <umang.jain@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2024-08-29dma-mapping: don't return errors from dma_set_max_seg_sizeChristoph Hellwig2-5/+2
A NULL dev->dma_parms indicates either a bus that is not DMA capable or grave bug in the implementation of the bus code. There isn't much the driver can do in terms of error handling for either case, so just warn and continue as DMA operations will fail anyway. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Robin Murphy <robin.murphy@arm.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # For MMC
2024-08-28Merge tag 'tags/next-media-videobuf-20240827' of ↵Hans Verkuil1-7/+0
git://git.kernel.org/pub/scm/linux/kernel/git/pinchartl/linux.git - videobuf2 regression fix Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> From: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://patchwork.linuxtv.org/project/linux-media/patch/20240827122125.GA17846@pendragon.ideasonboard.com/
2024-08-28Merge tag 'next-media-20240826' of ↵Hans Verkuil4-23/+83
git://git.kernel.org/pub/scm/linux/kernel/git/pinchartl/linux.git Improvements to link validation in media graph. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> From: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://patchwork.linuxtv.org/project/linux-media/patch/20240826141040.GC11033@pendragon.ideasonboard.com/
2024-08-28Merge tag 'tags/next-media-renesas-20240825' of ↵Hans Verkuil2-12/+10
git://git.kernel.org/pub/scm/linux/kernel/git/pinchartl/linux.git Improvements to Renesas media drivers: - R-Car V4M support for VIN - Fix rzg2l-csi2 module auto-loading Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> From: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://patchwork.linuxtv.org/project/linux-media/patch/20240824234307.GC9543@pendragon.ideasonboard.com/
2024-08-28Merge tag 'tags/next-media-imx-20240825' of ↵Hans Verkuil2-17/+19
git://git.kernel.org/pub/scm/linux/kernel/git/pinchartl/linux.git Improvements to i.MX media drivers: - Switch to RUNTIME/SYSTEM_SLEEP_PM_OPS() for better compile testing of the imx-mipi-csis and imx8mq-mipi-csi2 drivers - Improve real time behaviour of imx-mipi-csis by avoiding logging while holding a spin lock Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> From: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://patchwork.linuxtv.org/project/linux-media/patch/20240824233233.GB9543@pendragon.ideasonboard.com/
2024-08-28Merge tag 'tags/next-media-misc-20240825' of ↵Hans Verkuil1-25/+13
git://git.kernel.org/pub/scm/linux/kernel/git/pinchartl/linux.git Miscellaneous changes: mt9p031, starfive and v4l2-mc. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> From: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://patchwork.linuxtv.org/project/linux-media/patch/20240824233140.GA9543@pendragon.ideasonboard.com/
2024-08-28media: imagination: VIDEO_E5010_JPEG_ENC should depend on ARCH_K3Geert Uytterhoeven1-0/+1
Currently, the Imagination E5010 JPEG Encoder is only present on Texas Instruments K3 SoCs. Hence add a dependency on ARCH_K3, to prevent asking the user about this driver when configuring a kernel without TI K3 SoC support. The dependency can be relaxed if/when the encoder appears on other SoC families. Fixes: a1e294045885 ("media: imagination: Add E5010 JPEG Encoder driver") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2024-08-28media: hantro: Add RK3588 VEPU121Sebastian Reichel1-0/+1
RK3588 handling is exactly the same as RK3568. This is not handled using fallback compatibles to avoid exposing multiple video devices on kernels not having the multicore disable patch. Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2024-08-28media: hantro: Disable multicore supportSebastian Reichel1-0/+47
Avoid exposing equal Hantro video codecs to userspace. Equal video codecs allow scheduling work between the cores. For that kernel support is required, which does not yet exist. Until that is implemented avoid exposing each core separately to userspace so that multicore can be added in the future without breaking userspace ABI. This was written with Rockchip RK3588 in mind (which has 4 Hantro H1 cores), but applies to all SoCs. Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2024-08-28media: verisilicon: Add reference buffer compression featureBenjamin Gaignard7-4/+109
Reference frame compression is a feature added in the G2 decoder to compress frame buffers so that the bandwidth of storing/loading reference frames can be reduced, especially with high resolution decoded streams. The impact of compressed frames is confirmed when using perf to monitor the number of memory accesses with or without the compression feature. The following command: perf stat -a -e \ imx8_ddr0/cycles/,imx8_ddr0/read-cycles/,imx8_ddr0/write-cycles/ \ gst-launch-1.0 filesrc \ location=Jockey_3840x2160_120fps_420_8bit_HEVC_RAW.hevc ! queue ! \ h265parse ! v4l2slh265dec ! video/x-raw,format=NV12 ! fakesink Gives us these results without the compression feature: Performance counter stats for 'system wide': 1711300345 imx8_ddr0/cycles/ 892207924 imx8_ddr0/read-cycles/ 1291785864 imx8_ddr0/write-cycles/ 13.760048353 seconds time elapsed With the compression feature: Performance counter stats for 'system wide': 274526799 imx8_ddr0/cycles/ 453120194 imx8_ddr0/read-cycles/ 833391434 imx8_ddr0/write-cycles/ 18.257831534 seconds time elapsed As expected the number of read/write cycles are really lower when compression is used. Since storing the compression data requires more memory a module parameter named 'hevc_use_compression' is used to enable/disable this feature and, by default, compression isn't used. Enabling the compression feature means that the output-frames of the decoder are stored with a specific compression pixel-format. Since this pixel format is unknown, this patch restrains the compression feature usage to the cases where post-processor pixel-formats (NV12 or NV15) are selected by the applications. The Fluster compliance HEVC test suite score is still 141/147 with this patch. Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com> Tested-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2024-08-28media: mediatek: vcodec: Constify struct vb2_opsChristophe JAILLET2-2/+2
"struct vb2_ops" are not modified in this driver. Constifying this structure moves some data to a read-only section, so increase overall security. On a x86_64, with allmodconfig: Before: ====== text data bss dec hex filename 18059 3096 16 21171 52b3 drivers/media/platform/mediatek/vcodec/decoder/mtk_vcodec_dec_stateful.o After: ===== text data bss dec hex filename 18171 2968 16 21155 52a3 drivers/media/platform/mediatek/vcodec/decoder/mtk_vcodec_dec_stateful.o Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2024-08-28media: mediatek: vcodec: Fix H264 stateless decoder smatch warningYunfei Dong1-2/+7
Fix a smatch static checker warning on vdec_h264_req_if.c. Which leads to a kernel crash when fb is NULL. Fixes: 06fa5f757dc5 ("media: mtk-vcodec: vdec: support stateless H.264 decoding") Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2024-08-28media: mediatek: vcodec: Fix VP8 stateless decoder smatch warningYunfei Dong1-3/+7
Fix a smatch static checker warning on vdec_vp8_req_if.c. Which leads to a kernel crash when fb is NULL. Fixes: 7a7ae26fd458 ("media: mediatek: vcodec: support stateless VP8 decoding") Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2024-08-28media: mediatek: vcodec: Fix H264 multi stateless decoder smatch warningYunfei Dong1-2/+7
Fix a smatch static checker warning on vdec_h264_req_multi_if.c. Which leads to a kernel crash when fb is NULL. Fixes: 397edc703a10 ("media: mediatek: vcodec: add h264 decoder driver for mt8186") Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Sebastian Fricke <sebastian.fricke@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2024-08-27media: videobuf2: Drop minimum allocation requirement of 2 buffersLaurent Pinchart1-7/+0
When introducing the ability for drivers to indicate the minimum number of buffers they require an application to allocate, commit 6662edcd32cc ("media: videobuf2: Add min_reqbufs_allocation field to vb2_queue structure") also introduced a global minimum of 2 buffers. It turns out this breaks the Renesas R-Car VSP test suite, where a test that allocates a single buffer fails when two buffers are used. One may consider debatable whether test suite failures without failures in production use cases should be considered as a regression, but operation with a single buffer is a valid use case. While full frame rate can't be maintained, memory-to-memory devices can still be used with a decent efficiency, and requiring applications to allocate multiple buffers for single-shot use cases with capture devices would just waste memory. For those reasons, fix the regression by dropping the global minimum of buffers. Individual drivers can still set their own minimum. Fixes: 6662edcd32cc ("media: videobuf2: Add min_reqbufs_allocation field to vb2_queue structure") Cc: stable@vger.kernel.org Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Acked-by: Tomasz Figa <tfiga@chromium.org> Link: https://lore.kernel.org/r/20240825232449.25905-1-laurent.pinchart+renesas@ideasonboard.com Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2024-08-26media: renesas: vsp1: Implement .link_validate() for video devicesLaurent Pinchart1-0/+22
The v4l2_subdev_link_validate() helper prints a warning if the .link_validate() operation is not implemented for video devices connected to the subdevs. Implement the operation to silence the warning. Ideally validation of the link between the video device and the subdev should be implemented in that operation. That would however break userspace that does not configure formats on all video devices before starting streaming. While this mode of operation may not be considered valid by the V4L2 API specification (interpretation differ), it is nonetheless supported by the vsp1 driver at the moment and used by at least the vsp1 unit test suite, and possibly other userspace applications. Removing it would be a regression. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
2024-08-26media: v4l2-subdev: Support hybrid links in v4l2_subdev_link_validate()Laurent Pinchart1-5/+38
The v4l2_subdev_link_validate() helper function is meant to be used as a drop-in implementation of a V4L2 subdev entity .link_validate() handler. It supports subdev-to-subdev links only, and complains if one end of the link is not a subdev. This forces drivers that have video output devices connected to subdevs to implement a custom .link_validate() handler, calling v4l2_subdev_link_validate() for the subdev-to-subdev links, and performing manual link validation for the video-to-subdev links. Video devices embed a media entity, and therefore also have a .link_validate() operation. For video capture devices, the operation should be manually implemented by drivers for validate the subdev-to-video links. For video output devices, on the other hand, that operation is never called, as link validation is performed in the context of the sink entity. As a result, we end up forcing drivers to implement a custom .link_validate() handler for subdevs connected to video output devices, when the video devices provide an operation that could be used for that purpose. To improve that situation, make v4l2_subdev_link_validate() delegate link validation to the source's .link_validate() operation when the link source is a video device and the link sink is a subdev. This allows broader usage of v4l2_subdev_link_validate(), and simplifies drivers by making video device link validation easy to implement in the video device .link_validate(), regardless of whether the video device is an output device or a capture device. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
2024-08-26media: v4l2-subdev: Refactor warnings in v4l2_subdev_link_validate()Laurent Pinchart1-5/+9
The v4l2_subdev_link_validate() function prints a one-time warning if it gets called on a link whose source or sink is not a subdev. As links get validated in the context of their sink, a call to the helper when the link's sink is not a subdev indicates that the driver has set its .link_validate() handler to v4l2_subdev_link_validate() on a non-subdev entity, which is a clear driver bug. On the other hand, the link's source not being a subdev indicates that the helper is used for a subdev connected to a video output device, which is a lesser issue, if only because this is currently common practice. There are no drivers left in the kernel that use v4l2_subdev_link_validate() in a context where it may get called on a non-subdev sink. Replace the pr_warn_once() with a WARN_ON_ONCE() in this case to make sure that new offenders won't be introduced. A subsequent change will improve the v4l2_subdev_link_validate() helper to properly support validating video device to subdev links. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
2024-08-26media: sun4i_csi: Don't use v4l2_subdev_link_validate() for video deviceLaurent Pinchart1-1/+8
The v4l2_subdev_link_validate() function is a helper designed to validate links whose sink is a subdev. When called on a link whose sink is a video device, it only prints a warning and returns. Its usage in the sun4i_csi driver is wrong, leaving the link from the sub4i_csi subdev to the capture video device unvalidated. Planned improvements to the v4l2_subdev_link_validate() function will turn the warning into an error, breaking the sun4i_csi driver. As an interim measure, move the warning to the sun4i_csi driver in a custom validation handler, and drop the call to the helper. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Chen-Yu Tsai <wens@csie.org> Reviewed-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
2024-08-26media: sun4i_csi: Implement link validate for sun4i_csi subdevLaurent Pinchart1-0/+5
The sun4i_csi driver doesn't implement link validation for the subdev it registers, leaving the link between the subdev and its source unvalidated. Fix it, using the v4l2_subdev_link_validate() helper. Fixes: 577bbf23b758 ("media: sunxi: Add A10 CSI driver") Cc: stable@vger.kernel.org Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Chen-Yu Tsai <wens@csie.org> Reviewed-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
2024-08-26media: microchip-isc: Drop v4l2_subdev_link_validate() for video devicesLaurent Pinchart1-15/+4
The v4l2_subdev_link_validate() function is a helper designed to validate links whose sink is a subdev. When called on a link whose sink is a video device, it only prints a warning and returns. As the microchip-isc driver implements manual validate of the subdev to video device link, we can just drop the v4l2_subdev_link_validate() to avoid the warning. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
2024-08-25media: venus: firmware: Use iommu_paging_domain_alloc()Lu Baolu1-3/+3
An iommu domain is allocated in venus_firmware_init() and is attached to core->fw.dev in the same function. Use iommu_paging_domain_alloc() to make it explicit. Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Link: https://lore.kernel.org/r/20240610085555.88197-10-baolu.lu@linux.intel.com Signed-off-by: Stanimir Varbanov <stanimir.k.varbanov@gmail.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2024-08-25media: venus: Convert one-element-arrays to flex-arraysRicardo Ribalda2-10/+10
This structures are not used, and have a single element array at the end of them. This fix the following cocci warnings: drivers/media/platform/qcom/venus/hfi_helper.h:764:5-15: WARNING use flexible-array member instead (https://www.kernel.org/doc/html/latest/process/deprecated.html#zero-length-and-one-element-arrays) drivers/media/platform/qcom/venus/hfi_helper.h:1041:5-15: WARNING use flexible-array member instead (https://www.kernel.org/doc/html/latest/process/deprecated.html#zero-length-and-one-element-arrays) drivers/media/platform/qcom/venus/hfi_helper.h:1088:39-51: WARNING use flexible-array member instead (https://www.kernel.org/doc/html/latest/process/deprecated.html#zero-length-and-one-element-arrays) drivers/media/platform/qcom/venus/hfi_helper.h:1093:5-22: WARNING use flexible-array member instead (https://www.kernel.org/doc/html/latest/process/deprecated.html#zero-length-and-one-element-arrays) drivers/media/platform/qcom/venus/hfi_helper.h:1144:4-8: WARNING use flexible-array member instead (https://www.kernel.org/doc/html/latest/process/deprecated.html#zero-length-and-one-element-arrays) drivers/media/platform/qcom/venus/hfi_helper.h:1239:4-8: WARNING use flexible-array member instead (https://www.kernel.org/doc/html/latest/process/deprecated.html#zero-length-and-one-element-arrays) drivers/media/platform/qcom/venus/hfi_helper.h:1272:4-13: WARNING use flexible-array member instead (https://www.kernel.org/doc/html/latest/process/deprecated.html#zero-length-and-one-element-arrays) drivers/media/platform/qcom/venus/hfi_cmds.h:85:5-16: WARNING use flexible-array member instead (https://www.kernel.org/doc/html/latest/process/deprecated.html#zero-length-and-one-element-arrays) drivers/media/platform/qcom/venus/hfi_cmds.h:180:5-9: WARNING use flexible-array member instead (https://www.kernel.org/doc/html/latest/process/deprecated.html#zero-length-and-one-element-arrays) drivers/media/platform/qcom/venus/hfi_cmds.h:189:5-9: WARNING use flexible-array member instead (https://www.kernel.org/doc/html/latest/process/deprecated.html#zero-length-and-one-element-arrays) Signed-off-by: Ricardo Ribalda <ribalda@chromium.org> Signed-off-by: Stanimir Varbanov <stanimir.k.varbanov@gmail.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2024-08-25media: venus: Refactor hfi_buffer_alloc_mode_supportedRicardo Ribalda1-1/+1
Replace the old style single element array at the end of the struct with a flex array. The code does not allocate this structure, so the size change should not be a problem. This fixes the following cocci warning: drivers/media/platform/qcom/venus/hfi_helper.h:1233:5-9: WARNING use flexible-array member instead (https://www.kernel.org/doc/html/latest/process/deprecated.html#zero-length-and-one-element-arrays) Signed-off-by: Ricardo Ribalda <ribalda@chromium.org> Acked-by: Vikash Garodia <quic_vgarodia@quicinc.com> Signed-off-by: Stanimir Varbanov <stanimir.k.varbanov@gmail.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2024-08-25media: venus: Refactor hfi_session_fill_buffer_pktRicardo Ribalda2-2/+2
The single data array data[1] is only used to save the extradata_size. Replace it with a single element field. This fixes the following cocci warning: drivers/media/platform/qcom/venus/hfi_cmds.h:175:5-9: WARNING use flexible-array member instead (https://www.kernel.org/doc/html/latest/process/deprecated.html#zero-length-and-one-element-arrays) Signed-off-by: Ricardo Ribalda <ribalda@chromium.org> Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Acked-by: Vikash Garodia <quic_vgarodia@quicinc.com> Signed-off-by: Stanimir Varbanov <stanimir.k.varbanov@gmail.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2024-08-25media: venus: Refactor hfi_sys_get_property_pktRicardo Ribalda2-2/+2
Replace a single length element array with an element. This fixes the following cocci warning: drivers/media/platform/qcom/venus/hfi_cmds.h:77:5-9: WARNING use flexible-array member instead (https://www.kernel.org/doc/html/latest/process/deprecated.html#zero-length-and-one-element-arrays) Signed-off-by: Ricardo Ribalda <ribalda@chromium.org> Acked-by: Vikash Garodia <quic_vgarodia@quicinc.com> Signed-off-by: Stanimir Varbanov <stanimir.k.varbanov@gmail.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2024-08-25media: venus: Refactor hfi_session_empty_buffer_compressed_pktRicardo Ribalda1-1/+1
The single element array data[1] is never used. Replace it with a padding field of the same size. This fixes the following cocci warning: drivers/media/platform/qcom/venus/hfi_cmds.h:146:5-9: WARNING use flexible-array member instead (https://www.kernel.org/doc/html/latest/process/deprecated.html#zero-length-and-one-element-arrays) Signed-off-by: Ricardo Ribalda <ribalda@chromium.org> Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Acked-by: Vikash Garodia <quic_vgarodia@quicinc.com> Signed-off-by: Stanimir Varbanov <stanimir.k.varbanov@gmail.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2024-08-25media: venus: Refactor hfi_session_empty_buffer_uncompressed_plane0_pktRicardo Ribalda1-1/+1
The single element array data[1] is never used. Replace it with a padding field of the same size. This fixes the following cocci error: drivers/media/platform/qcom/venus/hfi_cmds.h:163:5-9: WARNING use flexible-array member instead (https://www.kernel.org/doc/html/latest/process/deprecated.html#zero-length-and-one-element-arrays) Signed-off-by: Ricardo Ribalda <ribalda@chromium.org> Acked-by: Vikash Garodia <quic_vgarodia@quicinc.com> Signed-off-by: Stanimir Varbanov <stanimir.k.varbanov@gmail.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2024-08-25media: venus: Refactor struct hfi_uncompressed_format_supportedRicardo Ribalda2-2/+2
plane_info is not a typical array, the data is not contiguous: pinfo = (void *)pinfo + sizeof(*constr) * num_planes + 2 * sizeof(u32); Replace the single element array with a single element field. This fixes the following cocci warning: drivers/media/platform/qcom/venus/hfi_helper.h:1009:36-46: WARNING use flexible-array member instead (https://www.kernel.org/doc/html/latest/process/deprecated.html#zero-length-and-one-element-arrays) Signed-off-by: Ricardo Ribalda <ribalda@chromium.org> Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Acked-by: Vikash Garodia <quic_vgarodia@quicinc.com> Signed-off-by: Stanimir Varbanov <stanimir.k.varbanov@gmail.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-28 02:49:51 +0300