summaryrefslogtreecommitdiff
path: root/drivers/media
AgeCommit message (Collapse)AuthorFilesLines
2022-10-25media: vivid: dev->bitmap_cap wasn't freed in all casesHans Verkuil1-5/+13
Whenever the compose width/height values change, the dev->bitmap_cap vmalloc'ed array must be freed and dev->bitmap_cap set to NULL. This was done in some places, but not all. This is only an issue if overlay support is enabled and the bitmap clipping is used. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Fixes: ef834f7836ec ([media] vivid: add the video capture and output parts) Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-10-25media: vivid: s_fbuf: add more sanity checksHans Verkuil3-1/+32
VIDIOC_S_FBUF is by definition a scary ioctl, which is why only root can use it. But at least check if the framebuffer parameters match that of one of the framebuffer created by vivid, and reject anything else. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Fixes: ef834f7836ec ([media] vivid: add the video capture and output parts) Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-10-25media: v4l: ctrls: Add a control for HDR modeBenjamin Mugnier1-0/+2
Add V4L2_CID_HDR_MODE as a menu item control to set the HDR mode of the sensor, and its documentation. Menu items are not standardized as they differ for each sensors. Signed-off-by: Benjamin Mugnier <benjamin.mugnier@foss.st.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
2022-10-25media: i2c: add support for OV4689Mikhail Rudenko3-0/+1040
Add a V4L2 sub-device driver for OmniVision OV4689 image sensor. This is a 4 Mpx image sensor using the I2C bus for control and the CSI-2 bus for data. This driver supports following features: - manual exposure and analog gain control support - test pattern support - media controller support - runtime PM support - support following resolutions: + 2688x1520 at 30 fps The driver provides all mandatory V4L2 controls for compatibility with libcamera. The sensor supports 1/2/4-lane CSI-2 modes, but the driver implements 4 lane mode only at this moment. Signed-off-by: Mikhail Rudenko <mike.rudenko@gmail.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
2022-10-25media: i2c: Add ov08x40 image sensor driverShawn Tu3-0/+3341
Add a V4L2 sub-device driver for Omnivision ov08X40 image sensor. This is a camera sensor using the I2C bus for control and the CSI-2 bus for data. This driver supports following features: - manual exposure and analog/digital gain control support - vblank/hblank control support - test pattern support - media controller support - runtime PM support - support following resolutions: + 3856x2464 at 30FPS + 1928x1208 at 30FPS Signed-off-by: Jason Chen <jason.z.chen@intel.com> Signed-off-by: Shawn Tu <shawnx.tu@intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
2022-10-25media: exynos4-is: don't rely on the v4l2_async_subdev internalsMarek Szyprowski1-3/+1
Commit 1f391df44607 ("media: v4l2-async: Use endpoints in __v4l2_async_nf_add_fwnode_remote()") changed the data that is stored in the v4l2_async_subdev internals from the fwnode pointer to the parent device to the fwnode pointer to the matched endpoint. This broke the sensor matching code, which relied on the particular fwnode data in the v4l2_async_subdev internals. Fix this by simply matching the v4l2_async_subdev pointer, which is already available there. Reported-by: Daniel Scally <djrscally@gmail.com> Fixes: fa91f1056f17 ("[media] exynos4-is: Add support for asynchronous subdevices registration") Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Daniel Scally <djrscally@gmail.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
2022-10-25media: i2c: ov5648: Free V4L2 fwnode data on unbindRafael Mendonca1-0/+1
The V4L2 fwnode data structure doesn't get freed on unbind, which leads to a memleak. Fixes: e43ccb0a045f ("media: i2c: Add support for the OV5648 image sensor") Signed-off-by: Rafael Mendonca <rafaelmendsr@gmail.com> Reviewed-by: Tommaso Merciai <tommaso.merciai@amarulasolutions.com> Reviewed-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
2022-10-25media: ov8856: Add runtime PM callbacksHidenori Kobayashi1-14/+19
There were no runtime PM callbacks registered, leaving regulators being enabled while the device is suspended on DT systems. Adjust and register existing power controlling functions to turn them off/on. Signed-off-by: Hidenori Kobayashi <hidenorik@chromium.org> Reviewed-by: Tomasz Figa <tfiga@chromium.org> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
2022-10-25venus: pm_helpers: Fix error check in vcodec_domains_get()Tang Bin1-2/+2
In the function vcodec_domains_get(), dev_pm_domain_attach_by_name() may return NULL in some cases, so IS_ERR() doesn't meet the requirements. Thus fix it. Fixes: 7482a983dea3 ("media: venus: redesign clocks and pm domains control") Signed-off-by: Tang Bin <tangbin@cmss.chinamobile.com>
2022-10-25media: i2c: ad5820: Fix error pathRicardo Ribalda1-5/+5
Error path seems to be swaped. Fix the order and provide some meaningful names. Fixes: bee3d5115611 ("[media] ad5820: Add driver for auto-focus coil") Signed-off-by: Ricardo Ribalda <ribalda@chromium.org> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
2022-10-25media: i2c: ov5645: Drop fetching the clk reference by nameLad Prabhakar1-1/+1
The OV5645 sensor has a single clock source, so just drop fetching the clk reference by name. This is in preparation to drop the "clock-names" property from the DT binding. Suggested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
2022-10-25media: i2c: hi846: Fix memory leak in hi846_parse_dt()Rafael Mendonca1-4/+10
If any of the checks related to the supported link frequencies fail, then the V4L2 fwnode resources don't get released before returning, which leads to a memleak. Fix this by properly freeing the V4L2 fwnode data in a designated label. Fixes: e8c0882685f9 ("media: i2c: add driver for the SK Hynix Hi-846 8M pixel camera") Signed-off-by: Rafael Mendonca <rafaelmendsr@gmail.com> Reviewed-by: Tommaso Merciai <tommaso.merciai@amarulasolutions.com> Reviewed-by: Martin Kepplinger <martink@posteo.de> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
2022-10-25venus: firmware: Correct assertion of reset bit on remote processorStanimir Varbanov1-6/+4
Currently we use read/write_relaxed in combination with mb() to assert reset. This looks wrong because mb() after write_relaxed() will not order correctly load-update-store sequence. Correct this by use readl/writel which include memory barriers. Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
2022-10-25venus: firmware: Correct non-pix start and end addressesStanimir Varbanov1-2/+2
The default values for those registers are zero. Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
2022-10-25venus: firmware: Correct reset bitStanimir Varbanov1-2/+4
The reset bit for A9SS reset register is BIT(4) and for XTSS_SW_RESET it is BIT(0). Use the defines for those reset bits. Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
2022-10-25Merge tag 'drm-misc-next-2022-10-20' of ↵Dave Airlie4-45/+19
git://anongit.freedesktop.org/drm/drm-misc into drm-next drm-misc-next for 6.2: UAPI Changes: - Documentation for page-flip flags Cross-subsystem Changes: - dma-buf: Add unlocked variant of vmapping and attachment-mapping functions Core Changes: - atomic-helpers: CRTC primary plane test fixes - connector: TV API consistency improvements, cmdline parsing improvements - crtc-helpers: Introduce drm_crtc_helper_atomic_check() helper - edid: Fixes for HFVSDB parsing, - fourcc: Addition of the Vivante tiled modifier - makefile: Sort and reorganize the objects files - mode_config: Remove fb_base from drm_mode_config_funcs - sched: Add a module parameter to change the scheduling policy, refcounting fix for fences - tests: Sort the Kunit tests in the Makefile, improvements to the DP-MST tests - ttm: Remove unnecessary drm_mm_clean() call Driver Changes: - New driver: ofdrm - Move all drivers to a common dma-buf locking convention - bridge: - adv7533: Remove dynamic lane switching - it6505: Runtime PM support - ps8640: Handle AUX defer messages - tc358775: Drop soft-reset over I2C - ast: Atomic Gamma LUT Support, Convert to SHMEM, various improvements - lcdif: Support for YUV planes - mgag200: Fix PLL Setup on some revisions - udl: Modesetting improvements, hot-unplug support - vc4: Fix support for PAL-M Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20221020072405.g3o4hxuk75gmeumw@houat
2022-10-24media: saa7164: remove variable cntColin Ian King1-4/+2
Variable cnt is just being incremented and it's never used anywhere else. The variable and the increment are redundant so remove it. Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2022-10-24radio-terratec: Remove variable pColin Ian King1-3/+0
The variable p being decremented but it is never referenced, it is redundant and can be removed. Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2022-10-24media: platform: s5p-mfc: Fix spelling mistake "mmaping" -> "mmapping"Colin Ian King1-2/+2
There are a couple of spelling mistakes in mfc_debug messages. Fix them. Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2022-10-24media: platform: mtk-mdp3: remove unused VIDEO_MEDIATEK_VPU configMoudy Ho1-1/+0
Since REMOTEPROC completely replaces the VIDEO_MEDIATEK_VPU in MDP3, unused config should be removed to avoid compilation warnings reported on i386 or x86_64. Warning messages: WARNING: unmet direct dependencies detected for VIDEO_MEDIATEK_VPU Depends on [n]: MEDIA_SUPPORT [=y] && MEDIA_PLATFORM_SUPPORT [=y] && MEDIA_PLATFORM_DRIVERS [=y] && V4L_MEM2MEM_DRIVERS [=n] && VIDEO_DEV [=y] && (ARCH_MEDIATEK || COMPILE_TEST [=y]) Selected by [y]: - VIDEO_MEDIATEK_MDP3 [=y] && MEDIA_SUPPORT [=y] && MEDIA_PLATFORM_SUPPORT [=y] && MEDIA_PLATFORM_DRIVERS [=y] && (MTK_IOMMU [=n] || COMPILE_TEST [=y]) && VIDEO_DEV [=y] && (ARCH_MEDIATEK || COMPILE_TEST [=y]) && HAS_DMA [=y] && REMOTEPROC [=y] Fixes: 61890ccaefaf ("media: platform: mtk-mdp3: add MediaTek MDP3 driver") Signed-off-by: Moudy Ho <moudy.ho@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2022-10-24media: vivid: remove redundant assignment to variable checksumColin Ian King1-1/+0
Variable checksum is assigned a value that is never read, it is assigned a new value in a following for-loop. The assignment is redundant and can be removed. Cleans up clang scan build warning: drivers/media/test-drivers/vivid/vivid-vbi-gen.c:197:2: warning: Value stored to 'checksum' is never read [deadcode.DeadStores] Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2022-10-24media: mediatek: vcodec: fix h264 cavlc bitstream failYunfei Dong1-3/+29
Some cavlc bistream will decode fail when the frame size is less than 20 bytes. Need to add pending data at the end of the bitstream. For the minimum size of mapped memory is 256 bytes(16x16), adding four bytes data won't lead to access unknown virtual memory. Fixes: 59fba9eed5a7 ("media: mediatek: vcodec: support stateless H.264 decoding for mt8192") Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2022-10-24media: imx-jpeg: Fix Coverity issue in probeMirela Rabulea1-0/+2
Possible dereference null return after of_match_node, so check for NULL of_id. Signed-off-by: Mirela Rabulea <mirela.rabulea@oss.nxp.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2022-10-24media: v4l2-ioctl.c: Unify YCbCr/YUV terms in format descriptionsJernej Skrabec1-17/+17
Format descriptions use YCbCr and YUV terms interchangeably. Let's unify them so they all use YUV. While YCbCr is actually correct term here, YUV is shorter and thus it also fixes too long description of P010 tiled format. Fixes: 3c8e19d3d3f9 ("media: Add P010 tiled format") Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2022-10-24media: c8sectpfe: Add missed header(s)Andy Shevchenko1-3/+5
Do not imply that some of the generic headers may be always included. Instead, include explicitly what we are direct user of. While at it, sort headers alphabetically. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2022-10-24media: adv748x: afe: Select input port when initializing AFENiklas Söderlund1-0/+4
When moving the input selection to adv748x_reset() it was missed that during probe the device is reset _before_ the initialization and parsing of DT by the AFE subdevice. This can lead to the wrong input port (in case it's not port 0) being selected until the device is reset for the first time. Fix this by restoring the call to adv748x_afe_s_input() in the AFE initialization while also keeping it in the adv748x_reset(). Fixes: c30ed81afe89 ("media: adv748x: afe: Select input port when device is reset") Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2022-10-24media: adv748x: Remove dead function declarationNiklas Söderlund1-3/+0
There is no implementation of adv748x_register_subdevs(), remove the declaration in the header file. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2022-10-24media: mxl5005s: Make array RegAddr static constColin Ian King1-1/+1
Don't populate the read-only array RegAddr on the stack but instead make it static const. Also makes the object code a little smaller. Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2022-10-24media: amphion: reset instance if it's aborted before codec header parsedMing Qian1-3/+10
there is hardware limitation that if it's aborted before the first codec header parsed, the codec may be stalled unless we do reset codec. and drop the source change event if it's triggered after reset. Fixes: 6de8d628df6e ("media: amphion: add v4l2 m2m vpu decoder stateful driver") Signed-off-by: Ming Qian <ming.qian@nxp.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2022-10-24vivid: add INTEGER and INTEGER64 test control arraysHans Verkuil1-0/+28
Add INTEGER and INTEGER64 control arrays to test support for such controls. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2022-10-24media: coda: jpeg: Add check for kmallocJiasheng Jiang1-2/+8
As kmalloc can return NULL pointer, it should be better to check the return value and return error, same as coda_jpeg_decode_header. Fixes: 96f6f62c4656 ("media: coda: jpeg: add CODA960 JPEG encoder support") Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2022-10-24media: v4l2-ctrls: Fix off-by-one error in integer menu control checkLaurent Pinchart1-1/+1
The V4L2 API defines the maximum value for an integer menu control as the number of elements minus one. The v4l2_ctrl_new_std_menu() validates this constraint with an off-by-one error. Fix it. Fixes: d1e9b7c12b74 ("[media] V4L: Add support for integer menu controls with standard menu items") Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2022-10-24media: mediatek: vcodec: Skip unsupported h264 encoder profileIrui Wang1-1/+4
The encoder driver supports h264 baseline, main, high encoder profile. Set mask for V4L2_CID_MPEG_VIDEO_H264_PROFILE to skip the unsupported profile. get supported h264_profile by command: v4l2-ctl -d /dev/videoX -L h264_profile 0x00990a6b (menu) : min=0 max=4 default=4 value=4 0: Baseline 2: Main 4: High Signed-off-by: Irui Wang <irui.wang@mediatek.com> Tested-by: Allen-KH Cheng <allen-kh.cheng@mediatek.com> Reviewed-by: Yunfei Dong <yunfei.dong@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2022-10-24media: stm32: dcmi: Remove redundant dev_err callShang XiaoJing1-3/+1
devm_ioremap_resource() prints error message in itself. Remove the dev_err call to avoid redundant error message. Signed-off-by: Shang XiaoJing <shangxiaojing@huawei.com> Acked-by: Hugues Fruchet <hugues.fruchet@foss.st.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2022-10-24media: aspeed: use DEFINE_SHOW_ATTRIBUTE to simplify codeLiu Shixin1-14/+2
Use DEFINE_SHOW_ATTRIBUTE helper macro to simplify the code. No functional change. Signed-off-by: Liu Shixin <liushixin2@huawei.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2022-10-24media: zoran: remove unused declarations in zoran_device.hGaosheng Cui1-2/+0
jpg_bufsize and v4l_bufsize have been removed since commit 202ddbc9a33b ("media: staging: media: zoran: clean unused code"), so remove them. Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2022-10-24bttv: remove unused tea5757_set_freq declarationGaosheng Cui1-1/+0
tea5757_set_freq has been removed since commit 1b500373157c ("[media] bttv: Convert to generic TEA575x interface"). So tea5757_set_freq is a unused declaration, remove it. Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2022-10-24cx25821: remove unused cx25821_video_wakeup() declarationGaosheng Cui1-3/+0
cx25821_video_wakeup() has been removed since commit b671ae6bdc1a ("[media] cx25821: convert to vb2"). So cx25821_video_wakeup is a unused declaration, remove it. Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2022-10-24saa7164: remove unused saa7164_call_i2c_clients declarationGaosheng Cui1-2/+0
saa7164_call_i2c_clients has been removed in media/video since commit 5a6fa3fe9a46 ("[media] saa7164: Remove unused saa7164_call_i2c_clients()"). Then media/video has beed renamed media/pci since commit b285192a43f0 ("[media] rename most media/video pci drivers to media/pci"). So saa7164_call_i2c_clients is a unused declaration, remove it. Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2022-10-24media: saa7134: remove unused declarations in saa7134.hGaosheng Cui1-4/+0
saa7134_mixer_fops and saa7134_dsp_fops have been removed in media/video since commit 166fb6b4721f ("V4L/DVB (6623): remove saa7134-oss"). Then media/video has been renamed to media/pci since commit b285192a43f0 ("[media] rename most media/video pci drivers to media/pci"). saa7134_vbi_template has been removed since commit a9622391acbc ("V4L/DVB (6792): Fix VBI support"). so saa7134_mixer_fops, saa7134_dsp_fops and saa7134_vbi_template are unused declarations, remove them. Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2022-10-24media: cxd2820r: remove unused cxd2820r_debug declarationGaosheng Cui1-2/+0
cxd2820r_debug has been removed since commit 75aeafc9d0e2 ("[media] cxd2820r: switch to Kernel dev_* logging"), so remove it. Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2022-10-24media: dvb-frontends: remove unused drx_dap_fasi_funct_g declarationGaosheng Cui1-2/+0
drx_dap_fasi_funct_g has been removed since commit 80bff4b07595 ("[media] drx-j: get rid of struct drx_dap_fasi_funct_g"), so remove it. Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2022-10-23Merge tag 'media/v6.1-2' of ↵Linus Torvalds81-1206/+2282
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull missed media updates from Mauro Carvalho Chehab: "It seems I screwed-up my previous pull request: it ends up that only half of the media patches that were in linux-next got merged in -rc1. The script which creates the signed tags silently failed due to 5.19->6.0 so it ended generating a tag with incomplete stuff. So here are the missing parts: - a DVB core security fix - lots of fixes and cleanups for atomisp staging driver - old drivers that are VB1 are being moved to staging to be deprecated - several driver updates - mostly for embedded systems, but there are also some things addressing issues with some PC webcams, in the UVC video driver" * tag 'media/v6.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (163 commits) media: sun6i-csi: Move csi buffer definition to main header file media: sun6i-csi: Introduce and use video helper functions media: sun6i-csi: Add media ops with link notify callback media: sun6i-csi: Remove controls handler from the driver media: sun6i-csi: Register the media device after creation media: sun6i-csi: Pass and store csi device directly in video code media: sun6i-csi: Tidy up video code media: sun6i-csi: Tidy up v4l2 code media: sun6i-csi: Tidy up Kconfig media: sun6i-csi: Use runtime pm for clocks and reset media: sun6i-csi: Define and use variant to get module clock rate media: sun6i-csi: Always set exclusive module clock rate media: sun6i-csi: Tidy up platform code media: sun6i-csi: Refactor main driver data structures media: sun6i-csi: Define and use driver name and (reworked) description media: cedrus: Add a Kconfig dependency on RESET_CONTROLLER media: sun8i-rotate: Add a Kconfig dependency on RESET_CONTROLLER media: sun8i-di: Add a Kconfig dependency on RESET_CONTROLLER media: sun4i-csi: Add a Kconfig dependency on RESET_CONTROLLER media: sun6i-csi: Add a Kconfig dependency on RESET_CONTROLLER ...
2022-10-18Merge drm/drm-next into drm-misc-nextMaxime Ripard429-36876/+27848
Let's kick-off this release cycle. Signed-off-by: Maxime Ripard <maxime@cerno.tech>
2022-10-18media: videobuf2: Stop using internal dma-buf lockDmitry Osipenko3-30/+3
All drivers that use dma-bufs have been moved to the updated locking specification and now dma-buf reservation is guaranteed to be locked by importers during the mapping operations. There is no need to take the internal dma-buf lock anymore. Remove locking from the videobuf2 memory allocators. Acked-by: Tomasz Figa <tfiga@chromium.org> Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221017172229.42269-21-dmitry.osipenko@collabora.com
2022-10-18media: tegra-vde: Prepare to dynamic dma-buf locking specificationDmitry Osipenko1-3/+3
Prepare Tegra video decoder driver to the common dynamic dma-buf locking convention by starting to use the unlocked versions of dma-buf API functions. Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221017172229.42269-15-dmitry.osipenko@collabora.com
2022-10-18media: videobuf2: Prepare to dynamic dma-buf locking specificationDmitry Osipenko3-12/+13
Prepare V4L2 memory allocators to the common dynamic dma-buf locking convention by starting to use the unlocked versions of dma-buf API functions. Acked-by: Tomasz Figa <tfiga@chromium.org> Acked-by: Christian König <christian.koenig@amd.com> Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> Link: https://patchwork.freedesktop.org/patch/msgid/20221017172229.42269-14-dmitry.osipenko@collabora.com
2022-10-12treewide: use get_random_u32() when possibleJason A. Donenfeld1-2/+2
The prandom_u32() function has been a deprecated inline wrapper around get_random_u32() for several releases now, and compiles down to the exact same code. Replace the deprecated wrapper with a direct call to the real function. The same also applies to get_random_int(), which is just a wrapper around get_random_u32(). This was done as a basic find and replace. Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Yury Norov <yury.norov@gmail.com> Reviewed-by: Jan Kara <jack@suse.cz> # for ext4 Acked-by: Toke Høiland-Jørgensen <toke@toke.dk> # for sch_cake Acked-by: Chuck Lever <chuck.lever@oracle.com> # for nfsd Acked-by: Jakub Kicinski <kuba@kernel.org> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> # for thunderbolt Acked-by: Darrick J. Wong <djwong@kernel.org> # for xfs Acked-by: Helge Deller <deller@gmx.de> # for parisc Acked-by: Heiko Carstens <hca@linux.ibm.com> # for s390 Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
2022-10-12treewide: use get_random_{u8,u16}() when possible, part 1Jason A. Donenfeld2-3/+3
Rather than truncate a 32-bit value to a 16-bit value or an 8-bit value, simply use the get_random_{u8,u16}() functions, which are faster than wasting the additional bytes from a 32-bit value. This was done mechanically with this coccinelle script: @@ expression E; identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32"; typedef u16; typedef __be16; typedef __le16; typedef u8; @@ ( - (get_random_u32() & 0xffff) + get_random_u16() | - (get_random_u32() & 0xff) + get_random_u8() | - (get_random_u32() % 65536) + get_random_u16() | - (get_random_u32() % 256) + get_random_u8() | - (get_random_u32() >> 16) + get_random_u16() | - (get_random_u32() >> 24) + get_random_u8() | - (u16)get_random_u32() + get_random_u16() | - (u8)get_random_u32() + get_random_u8() | - (__be16)get_random_u32() + (__be16)get_random_u16() | - (__le16)get_random_u32() + (__le16)get_random_u16() | - prandom_u32_max(65536) + get_random_u16() | - prandom_u32_max(256) + get_random_u8() | - E->inet_id = get_random_u32() + E->inet_id = get_random_u16() ) @@ identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32"; typedef u16; identifier v; @@ - u16 v = get_random_u32(); + u16 v = get_random_u16(); @@ identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32"; typedef u8; identifier v; @@ - u8 v = get_random_u32(); + u8 v = get_random_u8(); @@ identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32"; typedef u16; u16 v; @@ - v = get_random_u32(); + v = get_random_u16(); @@ identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32"; typedef u8; u8 v; @@ - v = get_random_u32(); + v = get_random_u8(); // Find a potential literal @literal_mask@ expression LITERAL; type T; identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32"; position p; @@ ((T)get_random_u32()@p & (LITERAL)) // Examine limits @script:python add_one@ literal << literal_mask.LITERAL; RESULT; @@ value = None if literal.startswith('0x'): value = int(literal, 16) elif literal[0] in '123456789': value = int(literal, 10) if value is None: print("I don't know how to handle %s" % (literal)) cocci.include_match(False) elif value < 256: coccinelle.RESULT = cocci.make_ident("get_random_u8") elif value < 65536: coccinelle.RESULT = cocci.make_ident("get_random_u16") else: print("Skipping large mask of %s" % (literal)) cocci.include_match(False) // Replace the literal mask with the calculated result. @plus_one@ expression literal_mask.LITERAL; position literal_mask.p; identifier add_one.RESULT; identifier FUNC; @@ - (FUNC()@p & (LITERAL)) + (RESULT() & LITERAL) Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Yury Norov <yury.norov@gmail.com> Acked-by: Jakub Kicinski <kuba@kernel.org> Acked-by: Toke Høiland-Jørgensen <toke@toke.dk> # for sch_cake Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
2022-10-12treewide: use prandom_u32_max() when possible, part 1Jason A. Donenfeld1-1/+1
Rather than incurring a division or requesting too many random bytes for the given range, use the prandom_u32_max() function, which only takes the minimum required bytes from the RNG and avoids divisions. This was done mechanically with this coccinelle script: @basic@ expression E; type T; identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32"; typedef u64; @@ ( - ((T)get_random_u32() % (E)) + prandom_u32_max(E) | - ((T)get_random_u32() & ((E) - 1)) + prandom_u32_max(E * XXX_MAKE_SURE_E_IS_POW2) | - ((u64)(E) * get_random_u32() >> 32) + prandom_u32_max(E) | - ((T)get_random_u32() & ~PAGE_MASK) + prandom_u32_max(PAGE_SIZE) ) @multi_line@ identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32"; identifier RAND; expression E; @@ - RAND = get_random_u32(); ... when != RAND - RAND %= (E); + RAND = prandom_u32_max(E); // Find a potential literal @literal_mask@ expression LITERAL; type T; identifier get_random_u32 =~ "get_random_int|prandom_u32|get_random_u32"; position p; @@ ((T)get_random_u32()@p & (LITERAL)) // Add one to the literal. @script:python add_one@ literal << literal_mask.LITERAL; RESULT; @@ value = None if literal.startswith('0x'): value = int(literal, 16) elif literal[0] in '123456789': value = int(literal, 10) if value is None: print("I don't know how to handle %s" % (literal)) cocci.include_match(False) elif value == 2**32 - 1 or value == 2**31 - 1 or value == 2**24 - 1 or value == 2**16 - 1 or value == 2**8 - 1: print("Skipping 0x%x for cleanup elsewhere" % (value)) cocci.include_match(False) elif value & (value + 1) != 0: print("Skipping 0x%x because it's not a power of two minus one" % (value)) cocci.include_match(False) elif literal.startswith('0x'): coccinelle.RESULT = cocci.make_expr("0x%x" % (value + 1)) else: coccinelle.RESULT = cocci.make_expr("%d" % (value + 1)) // Replace the literal mask with the calculated result. @plus_one@ expression literal_mask.LITERAL; position literal_mask.p; expression add_one.RESULT; identifier FUNC; @@ - (FUNC()@p & (LITERAL)) + prandom_u32_max(RESULT) @collapse_ret@ type T; identifier VAR; expression E; @@ { - T VAR; - VAR = (E); - return VAR; + return E; } @drop_var@ type T; identifier VAR; @@ { - T VAR; ... when != VAR } Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Kees Cook <keescook@chromium.org> Reviewed-by: Yury Norov <yury.norov@gmail.com> Reviewed-by: KP Singh <kpsingh@kernel.org> Reviewed-by: Jan Kara <jack@suse.cz> # for ext4 and sbitmap Reviewed-by: Christoph Böhmwalder <christoph.boehmwalder@linbit.com> # for drbd Acked-by: Jakub Kicinski <kuba@kernel.org> Acked-by: Heiko Carstens <hca@linux.ibm.com> # for s390 Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # for mmc Acked-by: Darrick J. Wong <djwong@kernel.org> # for xfs Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-29 18:54:00 +0300