summaryrefslogtreecommitdiff
path: root/drivers/media
AgeCommit message (Collapse)AuthorFilesLines
2023-02-08media: camss: csiphy-3ph: avoid undefined behaviorArnd Bergmann1-1/+2
Marking a case of the switch statement as unreachable means the compiler treats it as undefined behavior, which is then caught by an objtool warning: drivers/media/platform/qcom/camss/camss-csiphy-3ph-1-0.o: warning: objtool: csiphy_lanes_enable() falls through to next function csiphy_lanes_disable() Instead of simply continuing execution at a random place of the driver, print a warning and return from to the caller, which makes it possible to understand what happens and avoids the warning. Fixes: 53655d2a0ff2 ("media: camss: csiphy-3ph: add support for SM8250 CSI DPHY") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Robert Foss <robert.foss@linaro.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-02-06media: chips-media/imx-vdoa: Drop empty platform remove functionUwe Kleine-König1-6/+0
A remove callback just returning 0 is equivalent to no remove callback at all. So drop the useless function. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-02-06media: ti/davinci: vpbe_venc: Drop empty platform remove functionUwe Kleine-König1-6/+0
A remove callback just returning 0 is equivalent to no remove callback at all. So drop the useless function. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Lad Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-02-06media: ti/davinci: vpbe_osd: Drop empty platform remove functionUwe Kleine-König1-6/+0
A remove callback just returning 0 is equivalent to no remove callback at all. So drop the useless function. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Reviewed-by: Lad Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-02-06media: go7007: don't modify q->streamingHans Verkuil1-5/+1
The streaming state is maintained by the vb2 core, so drivers must never change it themselves. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-02-06media: v4l2-mem2mem: use vb2_is_streaming()Hans Verkuil1-2/+2
Don't touch q->streaming directly, use the vb2_is_streaming() function instead. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-02-06media: s5p-mfc: use vb2_is_streaming()Hans Verkuil1-2/+2
Don't touch q->streaming directly, use the vb2_is_streaming() function instead. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-02-06media: exynos4-is: drop unused pctrl field and headersKrzysztof Kozlowski2-4/+0
The field 'pctrl' in 'struct fimc_is' is not used, just like linux/pinctrl/consumer.h headers in the headers. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-02-06media: platform: mtk-mdp3: Fix return value check in mdp_probe()Qiheng Lin1-3/+4
In case of error, the function mtk_mutex_get() returns ERR_PTR() and never returns NULL. The NULL test in the return value check should be replaced with IS_ERR(). And also fix the err_free_mutex case. Fixes: 61890ccaefaf ("media: platform: mtk-mdp3: add MediaTek MDP3 driver") Signed-off-by: Qiheng Lin <linqiheng@huawei.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-02-06media: videobuf2-core: drop obsolete sanity check in __vb2_queue_free()Hans Verkuil1-22/+3
The sanity check in __vb2_queue_free() is obsolete ever since commit f035eb4e976e ("[media] videobuf2: fix lockdep warning"). Remove it and let __vb2_queue_free() return void. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-02-06media: amphion: remove redundant check of colorspace in venc_s_fmtMing Qian1-14/+4
record the colorspace set by user. if it's not supported by h264 vui, then zero will be written to vui, but don't modify the user setting. Fixes: 0401e659c1f9 ("media: amphion: add v4l2 m2m vpu encoder stateful driver") Signed-off-by: Ming Qian <ming.qian@nxp.com> Acked-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-02-06media: rzg2l-cru: Remove unneeded semicolonYang Li2-2/+2
./drivers/media/platform/renesas/rzg2l-cru/rzg2l-csi2.c:409:2-3: Unneeded semicolon ./drivers/media/platform/renesas/rzg2l-cru/rzg2l-video.c:407:2-3: Unneeded semicolon Link: https://bugzilla.openanolis.cn/show_bug.cgi?id=3273 Reported-by: Abaci Robot <abaci@linux.alibaba.com> Signed-off-by: Yang Li <yang.lee@linux.alibaba.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-02-06media: i2c: s5c73m3: remove support for platform dataDmitry Torokhov3-17/+5
There are no existing users of s5c73m3_platform_data in the tree, and new users should either be using device tree, ACPI, or static device properties, so let's remove it from the driver. Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-02-06media: microchip: microchip-isc: replace v4l2_{dbg|info|err} with dev-*Eugen Hristev1-61/+48
v4l2_dbg and friends are legacy and should be removed. Replaced all the calls with dev_dbg equivalent. This also removes the 'debug' module parameter which has become obsolete. Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-02-06media: i2c: add imx415 cmos image sensor driverGerald Loacker3-0/+1315
Add driver for the Sony IMX415 CMOS image sensor. Signed-off-by: Gerald Loacker <gerald.loacker@wolfvision.net> Co-developed-by: Michael Riesch <michael.riesch@wolfvision.net> Signed-off-by: Michael Riesch <michael.riesch@wolfvision.net> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-02-06media: ipu3-cio2: Fix PM runtime usage_count in driver unbindSakari Ailus1-0/+3
Get the PM runtime usage_count and forbid PM runtime at driver unbind. The opposite is being done in probe() already. Fixes: commit c2a6a07afe4a ("media: intel-ipu3: cio2: add new MIPI-CSI2 driver") Cc: stable@vger.kernel.org # for >= 4.16 Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by: Bingbu Cao <bingbu.cao@intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-02-06media: i2c: ov5670: Handle RO controls in set_ctrlJacopo Mondi1-1/+7
The ov5670 driver registers three controls as read-only: - V4L2_CID_PIXEL_RATE - V4L2_CID_LINK_FREQ - V4L2_CID_HBLANK The driver updates the range of HBLANK with __v4l2_ctrl_modify_range() and updates the values of PIXEL_RATE and LINK_FREQ with an explicit call to __v4l2_ctrl_s_ctrl() in ov5670_set_pad_format() time. This causes the .set_ctrl handler to be called on these controls causing a non-fatal warning to be emitted: ov5670_set_ctrl Unhandled id:0x9e0902, val:0x824 This is currently only critical for HBLANK, as LINK_FREQ and PIXEL_RATE currently only support a single value, and the v4l2-ctrl framework skips calling .set_ctrl() if the current control value is not changed. Expand the ov5670_set_ctrl() callback to handle the above controls to remove the above warning and defend against future expansions of the supported pixel rates and link frequencies. Also be stricter and return an error value if a control is actually not handled. Reported-by: Luca Weiss <luca@z3ntu.xyz> Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Tested-by: Luca Weiss <luca@z3ntu.xyz> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-02-06media: i2c: ov5670: Add .get_selection() supportJean-Michel Hautbois1-6/+83
Add support for the .get_selection() pad operation to the ov5670 sensor driver. Report the native sensor size (pixel array), the crop bounds (readable pixel array area) and the current and default analog crop rectangles. Currently all driver's modes use an analog crop rectangle of size [12, 4, 2600, 1952]. Instead of hardcoding the value in the operation implementation, ad an .analog_crop field to the sensor's modes definitions, to make sure that if any mode gets added, its crop rectangle will be defined as well. While at it re-sort the modes' field definition order to match the declaration order and initialize the crop rectangle in init_cfg(). [Sakari Ailus: Fix a typo on comments (03800 -> 0x3800)] Signed-off-by: Jean-Michel Hautbois <jeanmichel.hautbois@ideasonboard.com> Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Tested-by: Luca Weiss <luca@z3ntu.xyz> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-02-06media: i2c: ov5670: Implement init_cfgJacopo Mondi1-26/+20
Implement the .init_cfg() pad operation and initialize the default format with the default full resolution mode 2592x1944. With .init_cfg() pad operation implemented the deprecated .open() internal operation can now be dropped. Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Tested-by: Luca Weiss <luca@z3ntu.xyz> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-02-06media: i2c: ov5670: Add runtime_pm operationsJacopo Mondi1-9/+69
Implement the runtime resume and suspend routines and install them as runtime_pm handlers. While at it rework the probe() sequence in order to enable runtime_pm before registering the async subdevice. Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Tested-by: Luca Weiss <luca@z3ntu.xyz> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-02-06media: i2c: ov5670: Probe GPIOsJacopo Mondi1-0/+28
The OV5670 has a powerdown and reset pin, named respectively "PWDN" and "XSHUTDOWN". Optionally probe the gpios connected to the pins during the driver probe routine. Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Tested-by: Luca Weiss <luca@z3ntu.xyz> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-02-06media: i2c: ov5670: Probe regulatorsJacopo Mondi1-0/+30
The OV5670 has three power supplies (AVDD, DOVDD and DVDD). Probe them in the driver to prepare controlling with runtime_pm operations. Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Tested-by: Luca Weiss <luca@z3ntu.xyz> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-02-06media: i2c: ov5670: Use common clock frameworkJacopo Mondi1-4/+22
Add support for probing the main system clock using the common clock framework and its OF bindings. Maintain ACPI compatibility by falling back to parse 'clock-frequency'. Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Tested-by: Luca Weiss <luca@z3ntu.xyz> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-02-06media: i2c: ov5670: Allow probing with OFJacopo Mondi1-0/+9
The ov5670 driver currently only supports probing using ACPI matching. Add support for OF and add a missing header inclusion. Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Tested-by: Luca Weiss <luca@z3ntu.xyz> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-02-06media: i2c: ov5675: add .get_selection supportQuentin Schulz1-0/+26
The sensor has 2592*1944 active pixels, surrounded by 16 active dummy pixels and there are an additional 24 black rows "at the bottom". [2624] +-----+------------------+-----+ | | 16 dummy | | +-----+------------------+-----+ | | | | | | [2592] | | | | | | |16 | valid | 16 |[2000] |dummy| |dummy| | | [1944]| | | | | | +-----+------------------+-----+ | | 16 dummy | | +-----+------------------+-----+ | | 24 black lines | | +-----+------------------+-----+ The top-left coordinate is gotten from the registers specified in the modes which are identical for both currently supported modes. There are currently two modes supported by this driver: 2592*1944 and 1296*972. The second mode is obtained thanks to subsampling while keeping the same field of view (FoV). No cropping involved, hence the harcoded values. Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-02-06media: i2c: ov5675: parse and register V4L2 device tree propertiesQuentin Schulz1-1/+17
Parse V4L2 device tree properties and register controls for them. Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-02-06media: ov5675: add device-tree support and support runtime PMQuentin Schulz1-21/+129
Until now, this driver only supported ACPI. This adds support for Device Tree too while enabling clock and regulators in runtime PM. Signed-off-by: Quentin Schulz <quentin.schulz@theobroma-systems.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-02-06media: i2c: imx219: Fix binning for RAW8 captureJai Luthra1-8/+49
2x2 binning works fine for RAW10 capture, but for RAW8 1232p mode it leads to corrupted frames [1][2]. Using the special 2x2 analog binning mode fixes the issue, but causes artefacts for RAW10 1232p capture. So here we choose the binning mode depending upon the frame format selected. As both binning modes work fine for 480p RAW8 and RAW10 capture, it can share the same code path as 1232p for selecting binning mode. [1] https://forums.raspberrypi.com/viewtopic.php?t=332103 [2] https://github.com/raspberrypi/libcamera-apps/issues/281 Fixes: 22da1d56e982 ("media: i2c: imx219: Add support for RAW8 bit bayer format") Signed-off-by: Jai Luthra <j-luthra@ti.com> Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-02-06media: sun4i-csi: Use CSI_INT_STA_REG name, fix typo in a commentOleg Verych1-2/+2
Fix interrupt status register offset usage to be a defined name CSI_INT_STA_REG (= 0x34) instead of a plain number. Additionally fix a typo in a comment of the same file. Signed-off-by: Oleg Verych <olecom@gmail.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-02-06media: i2c: IMX296 camera sensor driverLaurent Pinchart3-0/+1186
The IMX296LLR is a monochrome 1.60MP CMOS sensor from Sony. The driver supports cropping and binning (but not both at the same time due to hardware limitations) and exposure, gain, vertical blanking and test pattern controls. Preliminary support is also included for the color IMX296LQR sensor. [Sakari Ailus: Make driver's remove function return void] Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-02-06media: ov5640: Fix analogue gain controlPaul Elder1-1/+1
Gain control is badly documented in publicly available (including leaked) documentation. There is an AGC pre-gain in register 0x3a13, expressed as a 6-bit value (plus an enable bit in bit 6). The driver hardcodes it to 0x43, which one application note states is equal to x1.047. The documentation also states that 0x40 is equel to x1.000. The pre-gain thus seems to be expressed as in 1/64 increments, and thus ranges from x1.00 to x1.984. What the pre-gain does is however unspecified. There is then an AGC gain limit, in registers 0x3a18 and 0x3a19, expressed as a 10-bit "real gain format" value. One application note sets it to 0x00f8 and states it is equal to x15.5, so it appears to be expressed in 1/16 increments, up to x63.9375. The manual gain is stored in registers 0x350a and 0x350b, also as a 10-bit "real gain format" value. It is documented in the application note as a Q6.4 values, up to x63.9375. One version of the datasheet indicates that the sensor supports a digital gain: The OV5640 supports 1/2/4 digital gain. Normally, the gain is controlled automatically by the automatic gain control (AGC) block. It isn't clear how that would be controlled manually. There appears to be no indication regarding whether the gain controlled through registers 0x350a and 0x350b is an analogue gain only or also includes digital gain. The words "real gain" don't necessarily mean "combined analogue and digital gains". Some OmniVision sensors (such as the OV8858) are documented as supoprting different formats for the gain values, selectable through a register bit, and they are called "real gain format" and "sensor gain format". For that sensor, we have (one of) the gain registers documented as 0x3503[2]=0, gain[7:0] is real gain format, where low 4 bits are fraction bits, for example, 0x10 is 1x gain, 0x28 is 2.5x gain If 0x3503[2]=1, gain[7:0] is sensor gain format, gain[7:4] is coarse gain, 00000: 1x, 00001: 2x, 00011: 4x, 00111: 8x, gain[7] is 1, gain[3:0] is fine gain. For example, 0x10 is 1x gain, 0x30 is 2x gain, 0x70 is 4x gain (The second part of the text makes little sense) "Real gain" may thus refer to the combination of the coarse and fine analogue gains as a single value. The OV5640 0x350a and 0x350b registers thus appear to control analogue gain. The driver incorrectly uses V4L2_CID_GAIN as V4L2 has a specific control for analogue gain, V4L2_CID_ANALOGUE_GAIN. Use it. If registers 0x350a and 0x350b are later found to control digital gain as well, the driver could then restrict the range of the analogue gain control value to lower than x64 and add a separate digital gain control. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Reviewed-by: Jai Luthra <j-luthra@ti.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-02-06media: i2c: ov772x: Fix memleak in ov772x_probe()Yuan Can1-2/+1
A memory leak was reported when testing ov772x with bpf mock device: AssertionError: unreferenced object 0xffff888109afa7a8 (size 8): comm "python3", pid 279, jiffies 4294805921 (age 20.681s) hex dump (first 8 bytes): 80 22 88 15 81 88 ff ff ."...... backtrace: [<000000009990b438>] __kmalloc_node+0x44/0x1b0 [<000000009e32f7d7>] kvmalloc_node+0x34/0x180 [<00000000faf48134>] v4l2_ctrl_handler_init_class+0x11d/0x180 [videodev] [<00000000da376937>] ov772x_probe+0x1c3/0x68c [ov772x] [<000000003f0d225e>] i2c_device_probe+0x28d/0x680 [<00000000e0b6db89>] really_probe+0x17c/0x3f0 [<000000001b19fcee>] __driver_probe_device+0xe3/0x170 [<0000000048370519>] driver_probe_device+0x49/0x120 [<000000005ead07a0>] __device_attach_driver+0xf7/0x150 [<0000000043f452b8>] bus_for_each_drv+0x114/0x180 [<00000000358e5596>] __device_attach+0x1e5/0x2d0 [<0000000043f83c5d>] bus_probe_device+0x126/0x140 [<00000000ee0f3046>] device_add+0x810/0x1130 [<00000000e0278184>] i2c_new_client_device+0x359/0x4f0 [<0000000070baf34f>] of_i2c_register_device+0xf1/0x110 [<00000000a9f2159d>] of_i2c_notify+0x100/0x160 unreferenced object 0xffff888119825c00 (size 256): comm "python3", pid 279, jiffies 4294805921 (age 20.681s) hex dump (first 32 bytes): 00 b4 a5 17 81 88 ff ff 00 5e 82 19 81 88 ff ff .........^...... 10 5c 82 19 81 88 ff ff 10 5c 82 19 81 88 ff ff .\.......\...... backtrace: [<000000009990b438>] __kmalloc_node+0x44/0x1b0 [<000000009e32f7d7>] kvmalloc_node+0x34/0x180 [<0000000073d88e0b>] v4l2_ctrl_new.cold+0x19b/0x86f [videodev] [<00000000b1f576fb>] v4l2_ctrl_new_std+0x16f/0x210 [videodev] [<00000000caf7ac99>] ov772x_probe+0x1fa/0x68c [ov772x] [<000000003f0d225e>] i2c_device_probe+0x28d/0x680 [<00000000e0b6db89>] really_probe+0x17c/0x3f0 [<000000001b19fcee>] __driver_probe_device+0xe3/0x170 [<0000000048370519>] driver_probe_device+0x49/0x120 [<000000005ead07a0>] __device_attach_driver+0xf7/0x150 [<0000000043f452b8>] bus_for_each_drv+0x114/0x180 [<00000000358e5596>] __device_attach+0x1e5/0x2d0 [<0000000043f83c5d>] bus_probe_device+0x126/0x140 [<00000000ee0f3046>] device_add+0x810/0x1130 [<00000000e0278184>] i2c_new_client_device+0x359/0x4f0 [<0000000070baf34f>] of_i2c_register_device+0xf1/0x110 The reason is that if priv->hdl.error is set, ov772x_probe() jumps to the error_mutex_destroy without doing v4l2_ctrl_handler_free(), and all resources allocated in v4l2_ctrl_handler_init() and v4l2_ctrl_new_std() are leaked. Fixes: 1112babde214 ("media: i2c: Copy ov772x soc_camera sensor driver") Signed-off-by: Yuan Can <yuancan@huawei.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-02-06media: i2c: ak7375: Add regulator managementYassine Oudjana1-0/+38
Make the driver get needed regulators on probe and enable/disable them on runtime PM callbacks. Signed-off-by: Yassine Oudjana <y.oudjana@protonmail.com> Tested-by: Umang Jain <umang.jain@ideasonboard.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-02-06media: mc: entity: Fix minor issues in comments and documentationLaurent Pinchart1-3/+3
Commit ae219872834a ("media: mc: entity: Rewrite media_pipeline_start()") incorrectly referred to entity instead of pad in a comment, and forgot to update a second comment accordingly when moving the pipe from entity to pad. Furthermore, it didn't properly reflow the documentation text it updated. Fix those small issues. Fixes: ae219872834a ("media: mc: entity: Rewrite media_pipeline_start()") Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-02-06media: mc: Get media_device directly from padLaurent Pinchart1-4/+4
Various functions access the media_device from a pad by going through the entity the pad belongs to. Remove the level of indirection and get the media_device from the pad directly. Fixes: 9e3576a1ae2b ("media: mc: convert pipeline funcs to take media_pad") Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-02-06media: i2c: ov9282: Switch to use dev_err_probe helperAlexander Stein1-4/+3
In the probe path, dev_err() can be replaced with dev_err_probe() which will check if error code is -EPROBE_DEFER and prints the error name. It also sets the defer probe reason which can be checked later through debugfs. It's more simple in error path. Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-02-06media: i2c: ov9282: remove unused and unset i2c_client memberAlexander Stein1-2/+0
This is not need anyway as the i2c_client is stored in v4l2_subdev. Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com> Acked-by: Daniele Alessandrelli <daniele.alessandrelli@intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-02-06media: xilinx: dma: Use media_pipeline_for_each_pad()Laurent Pinchart1-22/+6
Replace usage of the deprecated media graph walk API with the new media_pipeline_for_each_pad() macro. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-02-06media: ti: omap3isp: Use media_pipeline_for_each_entity()Laurent Pinchart1-14/+6
Replace usage of the deprecated media graph walk API with the new media_pipeline_for_each_entity() macro. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-02-06media: mc: entity: Add entity iterator for media_pipelineLaurent Pinchart1-0/+37
Add a media_pipeline_for_each_entity() macro to iterate over entities in a pipeline. This should be used by driver as a replacement of the media_graph_walk API, as iterating over the media_pipeline uses the cached list of pads and is thus more efficient. Deprecate the media_graph_walk API to indicate it shouldn't be used in new drivers. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-02-06Merge 6.2-rc7 into usb-nextGreg Kroah-Hartman2-4/+3
We need the USB fixes in here, and this resolves a merge conflict with the i915 driver as reported in linux-next Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-02-06media: mc: entity: Add pad iterator for media_pipelineLaurent Pinchart1-0/+18
Add a media_pipeline_for_each_pad() macro to iterate over pads in a pipeline. This should be used by driver as a replacement of the media_graph_walk API, as iterating over the media_pipeline uses the cached list of pads and is thus more efficient. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-02-06media: ov5640: Handle delays when no reset_gpio setJai Luthra1-6/+16
Some module manufacturers [1][2] don't expose the RESETB and PWDN pins of the sensor directly through the 15-pin FFC connector. Instead wiring ~PWDN gpio to the sensor pins with appropriate delays. In such cases, reset_gpio will not be available to the driver, but it will still be toggled when the sensor is powered on, and thus we should still honor the wait time of >= 5ms + 1ms + 20ms (see figure 2-3 in [3]) before attempting any i/o operations over SCCB. Also, rename the function to ov5640_powerup_sequence to better match the datasheet (section 2.7). [1] https://digilent.com/reference/_media/reference/add-ons/pcam-5c/pcam_5c_sch.pdf [2] https://www.alinx.com/public/upload/file/AN5641_User_Manual.pdf [3] https://cdn.sparkfun.com/datasheets/Sensors/LightImaging/OV5640_datasheet.pdf Fixes: 19a81c1426c1 ("[media] add Omnivision OV5640 sensor driver") Reported-by: Nishanth Menon <nm@ti.com> Signed-off-by: Jai Luthra <j-luthra@ti.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-02-06media: ov5640: Fix soft reset sequence and timingsJai Luthra1-10/+24
Move the register-based reset out of the init_setting[] and into the powerup_sequence function. The sensor is power cycled and reset using the gpio pins so the soft reset is not always necessary. This also ensures that soft reset honors the timing sequence from the datasheet [1]. [1] https://cdn.sparkfun.com/datasheets/Sensors/LightImaging/OV5640_datasheet.pdf Fixes: 19a81c1426c1 ("[media] add Omnivision OV5640 sensor driver") Reported-by: Nishanth Menon <nm@ti.com> Suggested-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Signed-off-by: Jai Luthra <j-luthra@ti.com> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonaboard.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-02-06media: i2c: st-vgxy61: Use asm intead of asm-genericAndy Shevchenko1-1/+3
There is no point to specify asm-generic for the unaligned.h. Drop the 'generic' suffix and move the inclusion to be after the non-media linux/* ones. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Benjamin Mugnier <benjamin.mugnier@foss.st.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-02-06media: ov5640: Update last busy timestamp to reset autosuspend timerAndrey Skvortsov1-1/+6
Otherwise autosuspend delay doesn't work and power is cut off immediately as device is freed. Signed-off-by: Andrey Skvortsov <andrej.skvortzov@gmail.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-02-06media: i2c: Add driver for OmniVision OV8858Nicholas Roth3-0/+2022
Add a driver for OmniVision OV8858 image sensor. The driver currently supports operations with 2 and 4 data lanes, in full resolution and half-binned resolution modes. The driver has been upported from the PinephonePro BSP available at https://gitlab.com/pine64-org/linux.git at commit 8c4a90c12dc2 ("media: i2c: ov8858: Use default subdev name"). Signed-off-by: Nicholas Roth <nicholas@rothemail.net> Signed-off-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-02-03media: i2c: imx290: Handle error from imx290_set_data_lanes()Laurent Pinchart1-1/+5
Check the error status returned by imx290_set_data_lanes() in its caller and propagate it. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-02-03media: i2c: imx290: Simplify imx290_set_data_lanes()Laurent Pinchart1-12/+5
There's no need to check for an incorrect number of data lanes in imx290_set_data_lanes() as the value is validated at probe() time. Drop the check. The PHY_LANE_NUM and CSI_LANE_MODE registers are programmed with a value equal to the number of lanes minus one. Compute it instead of handling it in the switch/case. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-02-03media: i2c: imx290: Configure data lanes at start timeLaurent Pinchart1-3/+3
There's no need to configure the data lanes in the runtime PM resume handler. Do so in imx290_start_streaming() instead. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
generated by cgit v1.2.3 (git 2.39.0) at 2025-10-02 12:30:10 +0300