summaryrefslogtreecommitdiff
path: root/drivers/media/video/cx18
AgeCommit message (Collapse)AuthorFilesLines
2009-03-30V4L/DVB (10445): cx18: Process Raw VBI on a whole frame basis; fix VBI ↵Andy Walls2-52/+33
buffer size The cx23418 appears to send Raw VBI buffers with a PTS on a per frame basis, not per field, so process Raw VBI on a whole frame basis and reduce some complexity. Fix VBI buffer size computation to handle a whole frame of Raw VBI for a 625 line system, which is the worst case and will work for 525 lines systems as well. Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10444): cx18: Fix sliced VBI PTS and fix artifacts in last raw line ↵Andy Walls1-5/+19
of field Fixed an endianess problem with the collection of the PTS from the VBI buffer given to us by the encoder. Also extrapolated the last 12 bytes of the last line of each field, to remove artifacts created by removing the first 12 bytes of each field for raw VBI. Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10443): cx18: Use correct line counts per field in firmware API callAndy Walls2-5/+3
The driver was incorrectly setting 0 line counts in a firmware API call to set the maximum amount of lines per field. Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10442): cx18: Fixes for enforcing when Encoder Raw VBI params can ↵Andy Walls2-28/+71
be set The Encoder will only allow the Raw VBI parameters, along with a number of other API parameters, to take effect when no analog captures are in progress. These parameters must be set before the first analog capture starts, be it MPEG, VBI, YUV, etc., and cannot be changed until the last one stops. It is not obvious to me what capture channel API parameters are shared and which ones must be set per capture channel, so set them all for every analog capture channel start up. This fixes the driver so that VBI capture can be started up after the MPEG capture is going. Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10441): cx18: Fix VBI ioctl() handling and Raw/Sliced VBI state ↵Andy Walls2-29/+94
management More sliced VBI fixes to bring the cx18 driver closer to full V4L2 spec compliance for VBI and to get sliced VBI working better. Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10440): cx18: Fix presentation timestamp (PTS) for VBI buffersAndy Walls4-13/+12
The old code from ivtv used a CX23415/6 PTS, which was simply left at 0 in the cx18 driver. Since the CX23418 gives us what I think is a PTS (or some other 90 kHz clock count) with each VBI buffer, this change has the cx18 driver use that as a PTS. Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10439): cx18: Clean-up and enable sliced VBI handlingAndy Walls11-160/+383
Removed legacy ivtv state variables, added comments, and cleaned up sliced VBI related code. Enabled sliced VBI. Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10437): cx18: Remove an unused spinlockAndy Walls2-3/+0
Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10436): cx18: Fix coding style of a switch statement per checkpatch.plAndy Walls1-25/+25
Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10435): cx18: Normalize APU after second APU firmware loadAndy Walls1-0/+13
Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10434): cx18: Smarter verification of CX18_AUDIO_ENABLE register writesAndy Walls2-3/+3
The CX18_AUDIO_ENABLE register usually never reads back what was just written under normal circumstances. Perform better checking that a write went to the register as expected with a specification of what bits to verify. Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10433): cx18: Defer A/V core initialization until a valid ↵Andy Walls1-7/+33
cx18_av_cmd arrives Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10408): v4l2: fix incorrect hue range checkHans Verkuil1-1/+1
A hue of -128 was rejected due to an incorrect range check, which was faithfully copy-and-pasted into four drivers... Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10284): cx18: Add initial entry for a Leadtek DVR3100 H hybrid cardAndy Walls3-4/+5
Card report provided by Patryk on the ivtv-devel list: http://ivtvdriver.org/pipermail/ivtv-devel/2009-January/005922.html Reported-by: Pat <tatyrza@mm.pl> Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10283): cx18: Call request_module() with proper argument types.Andy Walls1-1/+1
request_module() needs to be called with a string literal for a format string or with 1 or more variable arguments to avoid compiler warnings and possible exploits, if someone could cause us to get a format string with a '%' code in the format string when we make the call. Reported-by: Brandon Jenkins <bcjenkins@tvwhere.com> Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10281): cx18: Conversion to new V4L2 framework: use v4l2_device objectAndy Walls2-7/+19
First step in conversion to the new V4L2 framework. Added per cx18 device instance of the v4l2_device and its registration. Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10280): cx18: Rename structure members: dev to pci_dev and v4l2dev ↵Andy Walls11-70/+73
to video_dev Renamed structure member name to be more specific to type in anticipation of updating to the v4l2_device/v4l2_subdev framework. Too many objects named "dev" and /v4l2_\{0,1\}dev/ would be to confusing. Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10279): cx18: Print driver version number when logging statusAndy Walls1-1/+3
Make sure v4l2-ctl --log-status outputs the driver version. Reported-by: David Dombroski <davedom@optonline.net> Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10278): cx18: Fix bad audio in first analog capture.Andy Walls3-2/+33
Normalize the APU state before the second firmware load so that audio for the first analog capture is correct. Many thanks to Conexant for supporting me in finding a solution for this problem. Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10277): cx18, cx2341x: Fix bugs in cx18 AC3 control and comply with ↵Andy Walls1-2/+1
V4L2 spec Fix bugs in the cx18 AC3 control implementation that would have affected ivtv and other drivers via the cx2341x module. Bring AC3 controls behavior into comliance with V4L2 specification. Thanks to Hans Verkuil for reviewing the previous patch and pointing out the problems. Reported-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10276): cx18, cx2341x, ivtv: Add AC-3 audio encoding control to cx18Andy Walls3-6/+7
Initial addition of controls to set AC-3 audio encoding for the CX23418 - it does not work yet due to firmware or cx18 driver issues. This change affects the common cx2341x and ivtv modules due to shared structures and common functions. Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10275): cx18: Additional debug to display outgoing mailbox parametersAndy Walls1-12/+30
Added debug display of outgoing mailbox arguments. Fixed a minor problem with display of stale incoming mailbox contents, when user was not looking for debug warnings. Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-03-30V4L/DVB (10274): cx18: Fix a PLL divisor update for the I2S master clockAndy Walls1-2/+2
A redundant PLL divisior update for the I2S master clock after AV core firmware load was missed in earlier PLL parameter changes. This one really doesn't matter because it's redundant and gets overwritten, but the driver should be self consistent in the values used. Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-02V4L/DVB (10141): v4l2: debugging API changed to match against driver name ↵Hans Verkuil3-54/+16
instead of ID. Since the i2c driver ID will be removed in the near future we have to modify the v4l2 debugging API to use the driver name instead of driver ID. Note that this API is not used in applications other than v4l2-dbg.cpp as it is for debugging and testing only. Should anyone use the old VIDIOC_G_CHIP_IDENT, then this will be logged with a warning that it is deprecated and will be removed in 2.6.30. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-02V4L/DVB (10138): v4l2-ioctl: change to long return type to match unlocked_ioctl.Hans Verkuil2-4/+4
Since internal to v4l2 the ioctl prototype is the same regardless of it being called through .ioctl or .unlocked_ioctl, we need to convert it all to the long return type of unlocked_ioctl. Thanks to Jean-Francois Moine for posting an initial patch for this and thus bringing it to our attention. Cc: Jean-Francois Moine <moinejf@free.fr> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2009-01-02V4L/DVB (10135): v4l2: introduce v4l2_file_operations.Hans Verkuil5-19/+10
Introduce a struct v4l2_file_operations for v4l2 drivers. Remove the unnecessary inode argument. Move compat32 handling (and llseek) into the v4l2-dev core: this is now handled in the v4l2 core and no longer in the drivers themselves. Note that this changeset reverts an earlier patch that changed the return type of__video_ioctl2 from int to long. This change will be reinstated later in a much improved version. Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30V4L/DVB (9937): cx18: Use a consistent crystal value for computing all PLL ↵Andy Walls3-45/+191
parameters Use a consistent crystal value of 28.636360 MHz for computing all PLL parameters so clocks don't have relative error due to assumed crystal value mismatches. Also aimed to have all PLLs run their VOCs at close to 400 MHz to minimze the error of these PLLs as frequency synthesizers. Also set the VDCLK and AIMCLK PLLs to sane values before the APU and CPU firmware are loaded. Also fixed I2S Master clock dividers. Many thanks to Mike Bradley and Jeff Campbell for reporting this problem and suggesting the solution, researching and experimenting, and performing extensive testing to support their suggested solution. Reported-by: Jeff Campbell <jac1dlists@gmail.com> Reported-by: Mike Bradley <mike.bradley@incanetworks.com> Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30V4L/DVB (9936): cx18: Disable locking of Video and Audio PLL for analog capturesAndy Walls1-12/+12
Disable AV_LOCK, locking of audio PLL to video PLL in the cx18-av-core for analog captures. It seems to have adverse effects on captures from SVideo and CVBS sources with current clock & crystal settings in the driver. Many thanks to Jeff Campbell and Mike Bradley for reporting this problem, and suggesting the solution and performing extensive testing to support their suggestion. Reported-by: Jeff Campbell <jac1dlists@gmail.com> Reported-by: Mike Bradley <mike.bradley@incanetworks.com> Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30V4L/DVB (9895): cx18: Refine the firmware load and firmware startup processAndy Walls5-52/+60
Refine the firmware load and firmware startup process. Significant changes are to ensure the SCB and IPC area are correct before starting up the firmware, and letting the CPU firmware start up the APU firmware for us. Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30V4L/DVB (9894): cx18: Use a known open task handle when setting stream ↵Andy Walls4-4/+19
CX2341x parameters cx18: Use a known open task handle when setting stream CX2341x parameters Sometimes, we might only have VBI or YUV stream open instead of an MPEG stream. Let's make sure we use a valid task handle to perform the CX2341x control settings. Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30V4L/DVB (9893): cx18: Convert some list manipulations to emphasize entries ↵Andy Walls2-11/+7
not lists Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30V4L/DVB (9892): cx18: VBI comment corrections and comments about VBI issuesAndy Walls1-4/+12
VBI comment corrections to avoid future confusion about standards. Comments on cx18 VBI implementation shortcomings that need resolution. Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30V4L/DVB (9891): cx18 Replace magic number 63 with CX18_MAX_FW_MDLS_PER_STREAMAndy Walls3-6/+9
Removed magic number that referred to firmware limit on the number of MDLs the firmware can maintain for any stream at any one time. Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30V4L/DVB (9806): cx18: Enable raw VBI captureAndy Walls6-18/+59
A combined authorship patch from Hans Verkuil and Andy Walls. Raw VBI can now be captured but requires a video capture to be in progress as well. Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30V4L/DVB (9805): cx18: Port fix for raw/sliced VBI mixup from ivtv and cx25840Andy Walls7-17/+21
This is a port of the fixes Hans Verkuil made for ivtv/cx25840: The service_set field was used to determine whether raw or sliced VBI was desired. This is incorrect since it is perfectly valid to select sliced VBI with a service_set of 0. Instead the driver should check on VIDIOC_S_FMT whether the type field matches the raw or sliced VBI type. Updated the cx18 driver accordingly, including an additional check in cx18_start_v4l2_encode_stream() that didn't exist in ivtv. Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30V4L/DVB (9804): cx18: Avoid making firmware API calls with the queue lock heldAndy Walls4-37/+30
cx18: Avoid making firmware API calls with the queue lock held. The source of MPEG strem corruption when not holding the queue lock was found to be that the MPEG buffer could be retrieved by the user app before it was sync'ed for the host cpu. Incoming buffers are now sync'ed before being put on q_full and releasing the queue lock. We can thus avoid the sometimes lengthy call to the firmware for CPU_DE_SET_MDL while holding the queue lock, so we can get better performance. Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30V4L/DVB (9803): cx18: Increment version number due to siginificant buffering ↵Andy Walls1-1/+1
changes cx18: Increment version number due to siginificant buffering changes. Now version 1.0.4 Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30V4L/DVB (9802): cx18: Add module parameters for finer control over buffer ↵Andy Walls4-24/+167
allocations cx18: Add module parameters for finer control over buffer allocations. User now has the option of setting smaller buffers to get lower latency transfers from the encoder. User can also now set the number of buffers used for a stream explicitly. Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30V4L/DVB (9801): cx18: Allow more than 63 capture buffers in rotation per streamAndy Walls8-70/+113
cx18: Allow more than 63 capture buffers in rotation per stream. Implement q_busy to hold buffers the firmware has for use. q_free holds truly unused buffers in a pool. New buffers are given to the firmware as soon as the firmware returns one, if there are any to give to the firmware. Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30V4L/DVB (9800): cx18: Eliminate q_io from stream buffer handlingAndy Walls5-15/+25
Eliminate q_io from stream buffer handling in anticipation of upcoming changes in buffer handling. q_io was a holdover from ivtv and it's function in cx18 was trivial and not necessary. We just push things back onto the front of q_full now, instead of maintaining a 1 buffer q_io queue. Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30V4L/DVB (9778): cx18: cx18_writel_expect() should not declare success on a ↵Andy Walls1-1/+5
PCI read error cx18: cx18_writel_expect() should not declare success on a PCI read error. This removes the potential for cx18_write*_expect() calls to not accomplish a PCI write successfully as expected. The CX18-AV core uses the *expect() calls often and this may be the source of intermittent audio problems and standands switching problems. Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30V4L/DVB (9776): cx18: Change to per CX23418 device work queues for ↵Andy Walls3-23/+14
deferrable work handling cx18: Change to per CX23418 device work queues for deferrable work handling. Needed to support 2.6.22 and earlier kernels that can't selectively cancel work orders. Also will provide slightly better performance on SMP systems. Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30V4L/DVB (9730): cx18: Quiet a sometimes common warning that often has benign ↵Andy Walls1-3/+3
consequences cx18: Quiet a sometimes common warning that often has benign consequences. No one probably cares that the firmware took forever to ack our command, as they always seem to succeed whether or not the firmware acks it in a reasonable amount of time. Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30V4L/DVB (9729): cx18: Update version due to significant irq handling changesAndy Walls1-1/+1
Update the version number due to significant changes in the way the mailboxes and interrupts are handled. Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30V4L/DVB (9728): cx18: Copyright attribution update for files modified by awallsAndy Walls25-0/+25
Add copyright attribution for files modified by awalls in 2008 Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30V4L/DVB (9727): cx18: Adjust outgoing mailbox timeouts and remove statistics ↵Andy Walls6-54/+8
logging cx18: Adjust outgoing mailbox timeouts and remove statistics logging. This saves some wasted storage in struct cx18 for each card. Cutting the outgoing mailbox timeouts in half from the previous value appears to be safe with MythTV. Got rid of interrupted case code path after a wait uninterruptable returns. Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30V4L/DVB (9726): cx18: Restore buffers that have fallen out of the transfer ↵Andy Walls3-27/+92
rotation Restore buffers that have fallen out of the transfer rotation, and check for coherent mailbox data when processing a stale mailbox. Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30V4L/DVB (9725): cx18: Remove unnecessary MMIO accesses in time critical irq ↵Andy Walls4-22/+22
handling path Remove unnecessary MMIO accesses in time critical irq handling path. Also ensured that the mailbox ack field is read in last, so we know for sure if we have a stale mailbox or not on receipt. Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30V4L/DVB (9724): cx18: Streamline cx18-io[ch] wrappers and enforce MMIO retry ↵Andy Walls9-449/+71
strategy cx18: Streamline cx18-io[ch] wrappers and enforce MMIO retry strategy so that write retries always occur and read retries never occur (as they never help). Remove MMIO statistics logging to speed up MMIO accesses. Deprecate & ignore retry_mmio and mmio_ndelay module parameters, to essentially force retry_mmio=1 and mmio_ndelay=0. Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2008-12-30V4L/DVB (9723): cx18: Propagate staleness of mailbox and mdl ack data to ↵Andy Walls2-14/+27
work handler cx18: Propagate staleness of mailbox and mdl ack data to work handler to let the work handler know that the data from the encoder may not be coherent. Allows for smarter handling of buffers in future, to deal with MDLs that fall out of rotation due to irq handler being late in collecting mailbox and mdl ack info. Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-23 07:35:36 +0300