summaryrefslogtreecommitdiff
path: root/drivers/media/usb
AgeCommit message (Collapse)AuthorFilesLines
2024-06-29media: em28xx: Set GPIOs for non-audio boards when switching inputNils Rothaug1-1/+2
Fixes changing the Line Out audio source with the video input on MyGica UTV3 board. Previously, GPIOs were only set in em28xx_set_audio_source(), which only boards with USB audio support reach. Signed-off-by: Nils Rothaug <nils.rothaug@gmx.de> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2024-06-29media: em28xx: Add support for MyGica UTV3Nils Rothaug2-0/+53
The MyGica UTV3 Analog USB2.0 TV Box is a USB video capture card that has analog TV, composite video, and FM radio inputs, an IR remote, and provides audio only as Line Out, but not over USB. Mine is prepared for an FM tuner, but not equipped with one. Support for FM radio is therefore missing. The device contains: - Empia EM2860 USB bridge - Philips SAA7113 video decoder - NXP TDA9801T demodulator - Tena TNF931D-DFDR1 tuner - ST HCF4052 demux, switches input audio to Line Out Signed-off-by: Nils Rothaug <nils.rothaug@gmx.de> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2024-06-29media: dvb-usb: add missing MODULE_DESCRIPTION() macrosJeff Johnson2-0/+2
With ARCH=x86, make allmodconfig && make W=1 C=1 reports: WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/media/usb/dvb-usb/dvb-usb-dibusb-common.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/media/usb/dvb-usb/dvb-usb-dibusb-mc-common.o Add the missing invocations of the MODULE_DESCRIPTION() macro. Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2024-06-24media: b2c2: flexcop-usb: fix flexcop_usb_memory_reqHans Verkuil1-3/+4
smatch generated this warning: drivers/media/usb/b2c2/flexcop-usb.c:199 flexcop_usb_memory_req() warn: iterator 'i' not incremented and indeed the function is not using i or updating buf. The reason this always worked is that this function is called to write just 6 bytes (a MAC address) to the USB device, and so in practice there is only a single chunk written. If we ever would need to write more than one chunk, this function would fail since each chunk would read from or write to the same buf address. Rewrite the function to properly handle this. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2024-06-21media: Convert from tasklet to BH workqueueAllen Pais1-10/+11
The only generic interface to execute asynchronously in the BH context is tasklet; however, it's marked deprecated and has some design flaws. To replace tasklets, BH workqueue support was recently added. A BH workqueue behaves similarly to regular workqueues except that the queued work items are executed in the BH context. This patch converts drivers/media/* from tasklet to BH workqueue. Based on the work done by Tejun Heo <tj@kernel.org> Signed-off-by: Allen Pais <allen.lkml@gmail.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2024-06-21media: cx231xx: Constify struct vb2_opsChristophe JAILLET2-2/+2
"struct vb2_ops" are not modified in this driver. Constifying this structure moves some data to a read-only section, so increase overall security. On a x86_64, with allmodconfig: Before: ====== text data bss dec hex filename 36607 1156 0 37763 9383 drivers/media/usb/cx231xx/cx231xx-417.o After: ===== text data bss dec hex filename 36735 1016 0 37751 9377 drivers/media/usb/cx231xx/cx231xx-417.o Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2024-06-17media: uvcvideo: Remove mappings form uvc_device_infoRicardo Ribalda2-27/+1
We do not have any quirk device making us of this. Remove from now. It can be easily reverted later if needed. Signed-off-by: Ricardo Ribalda <ribalda@chromium.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Ricardo Ribalda <ribalda@chromium.org>
2024-06-17media: uvcvideo: Remove PLF device quirkingRicardo Ribalda3-135/+2
We can use heuristics to figure out the proper range of the control instead of quirking every single device. Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org> Signed-off-by: Ricardo Ribalda <ribalda@chromium.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Ricardo Ribalda <ribalda@chromium.org>
2024-06-17media: uvcvideo: Cleanup version-specific mappingRicardo Ribalda1-21/+0
We do not have more version specific mappings. Let's remove this code for now. It can be easily reverted later if needed. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org> Signed-off-by: Ricardo Ribalda <ribalda@chromium.org> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Ricardo Ribalda <ribalda@chromium.org>
2024-06-17media: uvcvideo: Probe the PLF characteristicsRicardo Ribalda1-3/+46
The UVC 1.5 standard defines 4 values for the PLF control: Off, 50Hz, 60Hz and Auto. But it does not clearly define if all the values must be implemented or not. Instead of just using the UVC version to determine what the PLF control can do, probe it. Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org> Signed-off-by: Ricardo Ribalda <ribalda@chromium.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Ricardo Ribalda <ribalda@chromium.org>
2024-06-17media: uvcvideo: Refactor Power Line Frequency limit selectionRicardo Ribalda1-38/+50
Move the PLF mapping logic to its own mapping filter function. This commit does not introduce any new functionality to the logic, it is just a preparation patch. Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org> Signed-off-by: Ricardo Ribalda <ribalda@chromium.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Ricardo Ribalda <ribalda@chromium.org>
2024-06-17media: uvcvideo: Allow custom control mappingRicardo Ribalda2-0/+12
Some advanced controls might not be completely implemented by vendors. If the controls are a enumeration, UVC does not gives a way to probe what is implemented and what is not. Let's create a new callback function where heuristics can be implemented to detect what is implemented and what not and update the control mapping accordingly. Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org> Signed-off-by: Ricardo Ribalda <ribalda@chromium.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Ricardo Ribalda <ribalda@chromium.org>
2024-06-17media: uvcvideo: Fix the bandwdith quirk on USB 3.xMichal Pecio1-3/+3
The bandwidth fixup quirk doesn't know that SuperSpeed exists and has the same 8 service intervals per millisecond as High Speed, hence its calculations are wrong. Assume that all speeds from HS up use 8 intervals per millisecond. No further changes are needed, updated code has been confirmed to work with all speeds from FS to SS. Signed-off-by: Michal Pecio <michal.pecio@gmail.com> Reviewed-by: Ricardo Ribalda <ribalda@chromium.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://lore.kernel.org/r/20240414190040.2255a0bc@foxbook Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2024-06-17media: uvcvideo: Force UVC version to 1.0a for 0408:4035Laurent Pinchart1-0/+11
The Quanta ACER HD User Facing camera reports a UVC 1.50 version, but implements UVC 1.0a as shown by the UVC probe control being 26 bytes long. Force the UVC version for that device. Reported-by: Giuliano Lotta <giuliano.lotta@gmail.com> Closes: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/2000947 Link: https://lore.kernel.org/r/20230115205210.20077-1-laurent.pinchart@ideasonboard.com Tested-by: Giuliano Lotta <giuliano.lotta@gmail.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2024-06-17media: uvcvideo: Override default flagsDaniel Schaefer1-1/+8
When the UVC device has a control that is readonly it doesn't set the SET_CUR flag. For example the privacy control has SET_CUR flag set in the defaults in the `uvc_ctrls` variable. Even if the device does not have it set, it's not cleared by uvc_ctrl_get_flags(). Originally written with assignment in commit 859086ae3636 ("media: uvcvideo: Apply flags from device to actual properties"). But changed to |= in commit 0dc68cabdb62 ("media: uvcvideo: Prevent setting unavailable flags"). It would not clear the default flags. With this patch applied the correct flags are reported to user space. Tested with: ``` > v4l2-ctl --list-ctrls | grep privacy privacy 0x009a0910 (bool) : default=0 value=0 flags=read-only ``` Signed-off-by: Daniel Schaefer <dhs@frame.work> Fixes: 0dc68cabdb62 ("media: uvcvideo: Prevent setting unavailable flags") Reviewed-by: Ricardo Ribalda <ribalda@chromium.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://lore.kernel.org/r/20240602065053.36850-1-dhs@frame.work Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2024-06-17media: uvcvideo: Enforce alignment of frame and intervalRicardo Ribalda1-4/+14
Struct uvc_frame and interval (u32*) are packaged together on streaming->formats on a single contiguous allocation. Right now they are allocated right after uvc_format, without taking into consideration their required alignment. This is working fine because both structures have a field with a pointer, but it will stop working when the sizeof() of any of those structs is not a multiple of the sizeof(void*). Enforce that alignment during the allocation. Signed-off-by: Ricardo Ribalda <ribalda@chromium.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://lore.kernel.org/r/20240404-uvc-align-v2-1-9e104b0ecfbd@chromium.org Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2024-06-17media: uvcvideo: Add quirk for invalid dev_sof in Logitech C920Oleksandr Natalenko1-1/+2
Similarly to Logitech C922, C920 seems to also suffer from a firmware bug that breaks hardware timestamping. Add a quirk for this camera model too. Before applying the quirk: ``` 100 (4) [-] none 100 200717 B 212.919114 213.079004 33.727 fps ts mono/SoE 101 (5) [-] none 101 200889 B 213.003703 213.114996 11.822 fps ts mono/SoE 102 (6) [-] none 102 200926 B 213.035571 213.146999 31.379 fps ts mono/SoE 103 (7) [-] none 103 200839 B 213.067424 213.179003 31.394 fps ts mono/SoE 104 (0) [-] none 104 200692 B 213.293180 213.214991 4.430 fps ts mono/SoE 105 (1) [-] none 105 200937 B 213.322374 213.247001 34.254 fps ts mono/SoE 106 (2) [-] none 106 201013 B 213.352228 213.279005 33.496 fps ts mono/SoE … ``` After applying the quirk: ``` 154 (2) [-] none 154 192417 B 42.199823 42.207788 27.779 fps ts mono/SoE 155 (3) [-] none 155 192040 B 42.231834 42.239791 31.239 fps ts mono/SoE 156 (4) [-] none 156 192213 B 42.263823 42.271822 31.261 fps ts mono/SoE 157 (5) [-] none 157 191981 B 42.299824 42.303827 27.777 fps ts mono/SoE 158 (6) [-] none 158 191953 B 42.331835 42.339811 31.239 fps ts mono/SoE 159 (7) [-] none 159 191904 B 42.363824 42.371813 31.261 fps ts mono/SoE 160 (0) [-] none 160 192210 B 42.399834 42.407801 27.770 fps ts mono/SoE ``` Fixes: 5d0fd3c806b9 ("[media] uvcvideo: Disable hardware timestamps by default") Signed-off-by: Oleksandr Natalenko <oleksandr@natalenko.name> Reviewed-by: Ricardo Ribalda <ribalda@chromium.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://lore.kernel.org/r/20240325142611.15550-1-oleksandr@natalenko.name Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2024-06-17media: uvcvideo: Fix integer overflow calculating timestampRicardo Ribalda1-5/+5
The function uvc_video_clock_update() supports a single SOF overflow. Or in other words, the maximum difference between the first ant the last timestamp can be 4096 ticks or 4.096 seconds. This results in a maximum value for y2 of: 0x12FBECA00, that overflows 32bits. y2 = (u32)ktime_to_ns(ktime_sub(last->host_time, first->host_time)) + y1; Extend the size of y2 to u64 to support all its values. Without this patch: # yavta -s 1920x1080 -f YUYV -t 1/5 -c /dev/video0 Device /dev/v4l/by-id/usb-Shine-Optics_Integrated_Camera_0001-video-index0 opened. Device `Integrated Camera: Integrated C' on `usb-0000:00:14.0-6' (driver 'uvcvideo') supports video, capture, without mplanes. Video format set: YUYV (56595559) 1920x1080 (stride 3840) field none buffer size 4147200 Video format: YUYV (56595559) 1920x1080 (stride 3840) field none buffer size 4147200 Current frame rate: 1/5 Setting frame rate to: 1/5 Frame rate set: 1/5 8 buffers requested. length: 4147200 offset: 0 timestamp type/source: mono/SoE Buffer 0/0 mapped at address 0x7947ea94c000. length: 4147200 offset: 4149248 timestamp type/source: mono/SoE Buffer 1/0 mapped at address 0x7947ea557000. length: 4147200 offset: 8298496 timestamp type/source: mono/SoE Buffer 2/0 mapped at address 0x7947ea162000. length: 4147200 offset: 12447744 timestamp type/source: mono/SoE Buffer 3/0 mapped at address 0x7947e9d6d000. length: 4147200 offset: 16596992 timestamp type/source: mono/SoE Buffer 4/0 mapped at address 0x7947e9978000. length: 4147200 offset: 20746240 timestamp type/source: mono/SoE Buffer 5/0 mapped at address 0x7947e9583000. length: 4147200 offset: 24895488 timestamp type/source: mono/SoE Buffer 6/0 mapped at address 0x7947e918e000. length: 4147200 offset: 29044736 timestamp type/source: mono/SoE Buffer 7/0 mapped at address 0x7947e8d99000. 0 (0) [-] none 0 4147200 B 507.554210 508.874282 242.836 fps ts mono/SoE 1 (1) [-] none 2 4147200 B 508.886298 509.074289 0.751 fps ts mono/SoE 2 (2) [-] none 3 4147200 B 509.076362 509.274307 5.261 fps ts mono/SoE 3 (3) [-] none 4 4147200 B 509.276371 509.474336 5.000 fps ts mono/SoE 4 (4) [-] none 5 4147200 B 509.476394 509.674394 4.999 fps ts mono/SoE 5 (5) [-] none 6 4147200 B 509.676506 509.874345 4.997 fps ts mono/SoE 6 (6) [-] none 7 4147200 B 509.876430 510.074370 5.002 fps ts mono/SoE 7 (7) [-] none 8 4147200 B 510.076434 510.274365 5.000 fps ts mono/SoE 8 (0) [-] none 9 4147200 B 510.276421 510.474333 5.000 fps ts mono/SoE 9 (1) [-] none 10 4147200 B 510.476391 510.674429 5.001 fps ts mono/SoE 10 (2) [-] none 11 4147200 B 510.676434 510.874283 4.999 fps ts mono/SoE 11 (3) [-] none 12 4147200 B 510.886264 511.074349 4.766 fps ts mono/SoE 12 (4) [-] none 13 4147200 B 511.070577 511.274304 5.426 fps ts mono/SoE 13 (5) [-] none 14 4147200 B 511.286249 511.474301 4.637 fps ts mono/SoE 14 (6) [-] none 15 4147200 B 511.470542 511.674251 5.426 fps ts mono/SoE 15 (7) [-] none 16 4147200 B 511.672651 511.874337 4.948 fps ts mono/SoE 16 (0) [-] none 17 4147200 B 511.873988 512.074462 4.967 fps ts mono/SoE 17 (1) [-] none 18 4147200 B 512.075982 512.278296 4.951 fps ts mono/SoE 18 (2) [-] none 19 4147200 B 512.282631 512.482423 4.839 fps ts mono/SoE 19 (3) [-] none 20 4147200 B 518.986637 512.686333 0.149 fps ts mono/SoE 20 (4) [-] none 21 4147200 B 518.342709 512.886386 -1.553 fps ts mono/SoE 21 (5) [-] none 22 4147200 B 517.909812 513.090360 -2.310 fps ts mono/SoE 22 (6) [-] none 23 4147200 B 517.590775 513.294454 -3.134 fps ts mono/SoE 23 (7) [-] none 24 4147200 B 513.298465 513.494335 -0.233 fps ts mono/SoE 24 (0) [-] none 25 4147200 B 513.510273 513.698375 4.721 fps ts mono/SoE 25 (1) [-] none 26 4147200 B 513.698904 513.902327 5.301 fps ts mono/SoE 26 (2) [-] none 27 4147200 B 513.895971 514.102348 5.074 fps ts mono/SoE 27 (3) [-] none 28 4147200 B 514.099091 514.306337 4.923 fps ts mono/SoE 28 (4) [-] none 29 4147200 B 514.310348 514.510567 4.734 fps ts mono/SoE 29 (5) [-] none 30 4147200 B 514.509295 514.710367 5.026 fps ts mono/SoE 30 (6) [-] none 31 4147200 B 521.532513 514.914398 0.142 fps ts mono/SoE 31 (7) [-] none 32 4147200 B 520.885277 515.118385 -1.545 fps ts mono/SoE 32 (0) [-] none 33 4147200 B 520.411140 515.318336 -2.109 fps ts mono/SoE 33 (1) [-] none 34 4147200 B 515.325425 515.522278 -0.197 fps ts mono/SoE 34 (2) [-] none 35 4147200 B 515.538276 515.726423 4.698 fps ts mono/SoE 35 (3) [-] none 36 4147200 B 515.720767 515.930373 5.480 fps ts mono/SoE Cc: stable@vger.kernel.org Fixes: 66847ef013cc ("[media] uvcvideo: Add UVC timestamps support") Signed-off-by: Ricardo Ribalda <ribalda@chromium.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://lore.kernel.org/r/20240610-hwtimestamp-followup-v1-2-f9eaed7be7f0@chromium.org Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2024-06-17media: uvcvideo: Fix hw timestamp handling for slow FPSRicardo Ribalda2-0/+23
In UVC 1.5 we get a single clock value per frame. With the current buffer size of 32, FPS slowers than 32 might roll-over twice. The current code cannot handle two roll-over and provide invalid timestamps. Revome all the samples from the circular buffer that are more than two rollovers old, so the algorithm always provides good timestamps. Note that we are removing values that are more than one second old, which means that there is enough distance between the two points that we use for the interpolation to provide good values. Tested-by: HungNien Chen <hn.chen@sunplusit.com> Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org> Reviewed-by: Tomasz Figa <tfiga@chromium.org> Signed-off-by: Ricardo Ribalda <ribalda@chromium.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://lore.kernel.org/r/20240610-hwtimestamp-followup-v1-1-f9eaed7be7f0@chromium.org Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2024-06-17media: uvcvideo: Refactor clock circular bufferRicardo Ribalda1-47/+36
Isolate all the changes related to the clock circular buffer to its own function, that way we can make changes easier to the buffer logic. Also simplify the lock, by removing the circular buffer clock handling from uvc_video_clock_decode(). And now that we are at it, unify the API of the clock functions. Tested-by: HungNien Chen <hn.chen@sunplusit.com> Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Ricardo Ribalda <ribalda@chromium.org> Reviewed-by: Tomasz Figa <tfiga@chromium.org> Link: https://lore.kernel.org/r/20240323-resend-hwtimestamp-v10-5-b08e590d97c7@chromium.org Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2024-06-17media: uvcvideo: Allow hw clock updates with buffers not fullRicardo Ribalda1-2/+14
With UVC 1.5 we get as little as one clock sample per frame. Which means that it takes 32 frames to move from the software timestamp to the hardware timestamp method. This results in abrupt changes in the timestamping after 32 frames (~1 second), resulting in noticeable artifacts when used for encoding. With this patch we modify the update algorithm to work with whatever amount of values are available. Tested-by: HungNien Chen <hn.chen@sunplusit.com> Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Ricardo Ribalda <ribalda@chromium.org> Reviewed-by: Tomasz Figa <tfiga@chromium.org> Link: https://lore.kernel.org/r/20240323-resend-hwtimestamp-v10-4-b08e590d97c7@chromium.org Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2024-06-17media: uvcvideo: Quirk for invalid dev_sof in Logitech C922Ricardo Ribalda3-0/+21
Logitech C922 internal SOF does not increases at a stable rate of 1kHz. This causes that the device_sof and the host_sof run at different rates, breaking the clock domain conversion algorithm. Eg: 30 (6) [-] none 30 614400 B 21.245557 21.395214 34.133 fps ts mono/SoE 31 (7) [-] none 31 614400 B 21.275327 21.427246 33.591 fps ts mono/SoE 32 (0) [-] none 32 614400 B 21.304739 21.459256 34.000 fps ts mono/SoE 33 (1) [-] none 33 614400 B 21.334324 21.495274 33.801 fps ts mono/SoE * 34 (2) [-] none 34 614400 B 21.529237 21.527297 5.130 fps ts mono/SoE * 35 (3) [-] none 35 614400 B 21.649416 21.559306 8.321 fps ts mono/SoE 36 (4) [-] none 36 614400 B 21.678789 21.595320 34.045 fps ts mono/SoE ... 99 (3) [-] none 99 614400 B 23.542226 23.696352 33.541 fps ts mono/SoE 100 (4) [-] none 100 614400 B 23.571578 23.728404 34.069 fps ts mono/SoE 101 (5) [-] none 101 614400 B 23.601425 23.760420 33.504 fps ts mono/SoE * 102 (6) [-] none 102 614400 B 23.798324 23.796428 5.079 fps ts mono/SoE * 103 (7) [-] none 103 614400 B 23.916271 23.828450 8.478 fps ts mono/SoE 104 (0) [-] none 104 614400 B 23.945720 23.860479 33.957 fps ts mono/SoE Instead of disabling completely the hardware timestamping for such hardware we take the assumption that the packet handling jitter is under 2ms and use the host_sof as dev_sof. We can think of the UVC hardware clock as a system with a coarse clock (the SOF) and a fine clock (the PTS). The coarse clock can be replaced with a clock on the same frequency, if the jitter of such clock is smaller than its sampling rate. That way we can save some of the precision of the fine clock. To probe this point we have run three experiments on the Logitech C922. On that experiment we run the camera at 33fps and we analyse the difference in msec between a frame and its predecessor. If we display the histogram of that value, a thinner histogram will mean a better meassurement. The results for: - original hw timestamp: https://ibb.co/D1HJJ4x - pure software timestamp: https://ibb.co/QC9MgVK - modified hw timestamp: https://ibb.co/8s9dBdk This bug in the camera firmware has been confirmed by the vendor. lsusb -v Bus 001 Device 044: ID 046d:085c Logitech, Inc. C922 Pro Stream Webcam Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 239 Miscellaneous Device bDeviceSubClass 2 bDeviceProtocol 1 Interface Association bMaxPacketSize0 64 idVendor 0x046d Logitech, Inc. idProduct 0x085c C922 Pro Stream Webcam bcdDevice 0.16 iManufacturer 0 iProduct 2 C922 Pro Stream Webcam iSerial 1 80B912DF bNumConfigurations 1 Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Ricardo Ribalda <ribalda@chromium.org> Reviewed-by: Ricardo Ribalda <ribalda@chromium.org> Signed-off-by: Oleksandr Natalenko <oleksandr@natalenko.name> Reviewed-by: Tomasz Figa <tfiga@chromium.org> Link: https://lore.kernel.org/r/20240323-resend-hwtimestamp-v10-3-b08e590d97c7@chromium.org Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2024-06-17media: uvcvideo: Ignore empty TS packetsRicardo Ribalda1-1/+30
Some SunplusIT cameras took a borderline interpretation of the UVC 1.5 standard, and fill the PTS and SCR fields with invalid data if the package does not contain data. "STC must be captured when the first video data of a video frame is put on the USB bus." Some SunplusIT devices send, e.g., buffer: 0xa7755c00 len 000012 header:0x8c stc 00000000 sof 0000 pts 00000000 buffer: 0xa7755c00 len 000012 header:0x8c stc 00000000 sof 0000 pts 00000000 buffer: 0xa7755c00 len 000668 header:0x8c stc 73779dba sof 070c pts 7376d37a While the UVC specification meant that the first two packets shouldn't have had the SCR bit set in the header. This borderline/buggy interpretation has been implemented in a variety of devices, from directly SunplusIT and from other OEMs that rebrand SunplusIT products. So quirking based on VID:PID will be problematic. All the affected modules have the following extension unit: VideoControl Interface Descriptor: guidExtensionCode {82066163-7050-ab49-b8cc-b3855e8d221d} But the vendor plans to use that GUID in the future and fix the bug, this means that we should use heuristic to figure out the broken packets. This patch takes care of this. lsusb of one of the affected cameras: Bus 001 Device 003: ID 1bcf:2a01 Sunplus Innovation Technology Inc. Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.01 bDeviceClass 239 Miscellaneous Device bDeviceSubClass 2 ? bDeviceProtocol 1 Interface Association bMaxPacketSize0 64 idVendor 0x1bcf Sunplus Innovation Technology Inc. idProduct 0x2a01 bcdDevice 0.02 iManufacturer 1 SunplusIT Inc iProduct 2 HanChen Wise Camera iSerial 3 01.00.00 bNumConfigurations 1 Tested-by: HungNien Chen <hn.chen@sunplusit.com> Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Ricardo Ribalda <ribalda@chromium.org> Reviewed-by: Tomasz Figa <tfiga@chromium.org> Link: https://lore.kernel.org/r/20240323-resend-hwtimestamp-v10-2-b08e590d97c7@chromium.org Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2024-06-17media: uvcvideo: Support timestamp lists of any sizeRicardo Ribalda1-1/+1
The tail of the list lives at the position before the head. This is mathematically noted as: ``` (head-1) mod size. ``` Unfortunately C, does not have a modulus operator, but a remainder operator (%). The reminder operation has a different result than the modulus if (head -1) is a negative number and size is not a power of two. Adding size to (head-1) allows the code to run with any value of size. This does not change the current behaviour of the driver, as the size is always a power of two, but avoid tedious debugging if we ever change its size. Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org> Signed-off-by: Ricardo Ribalda <ribalda@chromium.org> Reviewed-by: Tomasz Figa <tfiga@chromium.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: https://lore.kernel.org/r/20240323-resend-hwtimestamp-v10-1-b08e590d97c7@chromium.org Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
2024-06-15media: go7007: add missing MODULE_DESCRIPTION() macrosJeff Johnson2-0/+2
make allmodconfig && make W=1 C=1 reports: WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/media/usb/go7007/go7007.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/media/usb/go7007/go7007-usb.o Add the missing invocations of the MODULE_DESCRIPTION() macro. Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2024-05-31media: dvb-usb: Fix unexpected infinite loop in dvb_usb_read_remote_control()Zheng Yejian1-4/+31
Infinite log printing occurs during fuzz test: rc rc1: DViCO FusionHDTV DVB-T USB (LGZ201) as ... ... dvb-usb: schedule remote query interval to 100 msecs. dvb-usb: DViCO FusionHDTV DVB-T USB (LGZ201) successfully initialized ... dvb-usb: bulk message failed: -22 (1/0) dvb-usb: bulk message failed: -22 (1/0) dvb-usb: bulk message failed: -22 (1/0) ... dvb-usb: bulk message failed: -22 (1/0) Looking into the codes, there is a loop in dvb_usb_read_remote_control(), that is in rc_core_dvb_usb_remote_init() create a work that will call dvb_usb_read_remote_control(), and this work will reschedule itself at 'rc_interval' intervals to recursively call dvb_usb_read_remote_control(), see following code snippet: rc_core_dvb_usb_remote_init() { ... INIT_DELAYED_WORK(&d->rc_query_work, dvb_usb_read_remote_control); schedule_delayed_work(&d->rc_query_work, msecs_to_jiffies(rc_interval)); ... } dvb_usb_read_remote_control() { ... err = d->props.rc.core.rc_query(d); if (err) err(...) // Did not return even if query failed schedule_delayed_work(&d->rc_query_work, msecs_to_jiffies(rc_interval)); } When the infinite log printing occurs, the query callback 'd->props.rc.core.rc_query' is cxusb_rc_query(). And the log is due to the failure of finding a valid 'generic_bulk_ctrl_endpoint' in usb_bulk_msg(), see following code snippet: cxusb_rc_query() { cxusb_ctrl_msg() { dvb_usb_generic_rw() { ret = usb_bulk_msg(d->udev, usb_sndbulkpipe(d->udev, d->props.generic_bulk_ctrl_endpoint),...); if (ret) err("bulk message failed: %d (%d/%d)",ret,wlen,actlen); ... } ... } By analyzing the corresponding USB descriptor, it shows that the bNumEndpoints is 0 in its interface descriptor, but the 'generic_bulk_ctrl_endpoint' is 1, that means user don't configure a valid endpoint for 'generic_bulk_ctrl_endpoint', therefore this 'invalid' USB device should be rejected before it calls into dvb_usb_read_remote_control(). To fix it, we need to add endpoint check for 'generic_bulk_ctrl_endpoint'. And as Sean suggested, the same check and clear halts should be done for 'generic_bulk_ctrl_endpoint_response'. So introduce dvb_usb_check_bulk_endpoint() to do it for both of them. Fixes: 4d43e13f723e ("V4L/DVB (4643): Multi-input patch for DVB-USB device") Signed-off-by: Zheng Yejian <zhengyejian1@huawei.com> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2024-05-31media: pvrusb2: remove unused struct 'debugifc_mask_item'Dr. David Alan Gilbert1-5/+0
'debugifc_mask_item' is unused since commit 681c73994401 ("V4L/DVB (6691): pvrusb2: Rework pipeline state control"). Remove it. Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2024-05-31media: opera1: remove unused struct 'rc_map_opera_table'Dr. David Alan Gilbert1-4/+0
'rc_map_opera_table' has been unused since commit 2f4f58d689dd ("[media] rc: Name RC keymap tables as rc_map_table"). Remove it. Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2024-05-31media: go7007: Refactor Adlink PCI-MPG24 i2c mutexRicardo Ribalda1-11/+19
Move the lock/unlock to its own function. It makes the code cleaner and cocci happier. Fix the following cocci warning: drivers/media/usb/go7007/go7007-i2c.c:125:1-7: preceding lock on line 61 Signed-off-by: Ricardo Ribalda <ribalda@chromium.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2024-05-20Merge tag 'i2c-for-6.10-rc1' of ↵Linus Torvalds1-4/+1
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c updates from Wolfram Sang: "i2c core removes an argument from the i2c_mux_add_adapter() call to further deprecate class based I2C device instantiation. All users are converted, too. Other that that, Andi collected a number if I2C host driver patches. Those merges have their own description" * tag 'i2c-for-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (72 commits) power: supply: sbs-manager: Remove class argument from i2c_mux_add_adapter() i2c: mux: Remove class argument from i2c_mux_add_adapter() i2c: synquacer: Fix an error handling path in synquacer_i2c_probe() i2c: acpi: Unbind mux adapters before delete i2c: designware: Replace MODULE_ALIAS() with MODULE_DEVICE_TABLE() i2c: pxa: use 'time_left' variable with wait_event_timeout() i2c: s3c2410: use 'time_left' variable with wait_event_timeout() i2c: rk3x: use 'time_left' variable with wait_event_timeout() i2c: qcom-geni: use 'time_left' variable with wait_for_completion_timeout() i2c: jz4780: use 'time_left' variable with wait_for_completion_timeout() i2c: synquacer: use 'time_left' variable with wait_for_completion_timeout() i2c: stm32f7: use 'time_left' variable with wait_for_completion_timeout() i2c: stm32f4: use 'time_left' variable with wait_for_completion_timeout() i2c: st: use 'time_left' variable with wait_for_completion_timeout() i2c: omap: use 'time_left' variable with wait_for_completion_timeout() i2c: imx-lpi2c: use 'time_left' variable with wait_for_completion_timeout() i2c: hix5hd2: use 'time_left' variable with wait_for_completion_timeout() i2c: exynos5: use 'time_left' variable with wait_for_completion_timeout() i2c: digicolor: use 'time_left' variable with wait_for_completion_timeout() i2c: amd-mp2-plat: use 'time_left' variable with wait_for_completion_timeout() ...
2024-05-13i2c: mux: Remove class argument from i2c_mux_add_adapter()Heiner Kallweit1-4/+1
99a741aa7a2d ("i2c: mux: gpio: remove support for class-based device instantiation") removed the last call to i2c_mux_add_adapter() with a non-null class argument. Therefore the class argument can be removed. Note: Class-based device instantiation is a legacy mechanism which shouldn't be used in new code, so we can rule out that this argument may be needed again in the future. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de> Acked-by: Peter Rosin <peda@axentia.se> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Acked-by: Rob Herring (Arm) <robh@kernel.org> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
2024-05-04media: uvcvideo: Refactor iteratorsRicardo Ribalda1-11/+13
Avoid using the iterators after the list_for_each() constructs. This patch should be a NOP, but makes cocci, happier: drivers/media/usb/uvc/uvc_ctrl.c:1861:44-50: ERROR: invalid reference to the index variable of the iterator on line 1850 drivers/media/usb/uvc/uvc_ctrl.c:2195:17-23: ERROR: invalid reference to the index variable of the iterator on line 2179 Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Ricardo Ribalda <ribalda@chromium.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2024-05-03media: stk1160: Use min macroRicardo Ribalda1-8/+2
Instead of a custom min() implementation, use the real macro. Mitigates the following cocci WARNINGs: drivers/media/usb/stk1160/stk1160-video.c:133:12-13: WARNING opportunity for min() drivers/media/usb/stk1160/stk1160-video.c:176:13-14: WARNING opportunity for min() Link: https://lore.kernel.org/linux-media/20240429-fix-cocci-v3-19-3c4865f5a4b0@chromium.org Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Ricardo Ribalda <ribalda@chromium.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2024-05-03media: gspca: cpia1: Use min macroRicardo Ribalda1-4/+2
Simplifies the code. Found by cocci: drivers/media/usb/gspca/cpia1.c:607:30-31: WARNING opportunity for min() Link: https://lore.kernel.org/linux-media/20240429-fix-cocci-v3-18-3c4865f5a4b0@chromium.org Signed-off-by: Ricardo Ribalda <ribalda@chromium.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2024-05-03media: flexcop-usb: Use min macroRicardo Ribalda1-4/+1
Simplifies the code. Found by cocci: drivers/media/usb/b2c2/flexcop-usb.c:201:8-9: WARNING opportunity for min() Link: https://lore.kernel.org/linux-media/20240429-fix-cocci-v3-17-3c4865f5a4b0@chromium.org Signed-off-by: Ricardo Ribalda <ribalda@chromium.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2024-05-03media: au0828: Use umin macroRicardo Ribalda1-4/+1
Simplifies the code. Found by cocci: drivers/media/usb/au0828/au0828-video.c:605:11-12: WARNING opportunity for min() Link: https://lore.kernel.org/linux-media/20240429-fix-cocci-v3-16-3c4865f5a4b0@chromium.org Signed-off-by: Ricardo Ribalda <ribalda@chromium.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2024-05-03media: s2255: Use refcount_t instead of atomic_t for num_channelsRicardo Ribalda1-10/+10
Use an API that resembles more the actual use of num_channels. Found by cocci: drivers/media/usb/s2255/s2255drv.c:2362:5-24: WARNING: atomic_dec_and_test variation before object free at line 2363. drivers/media/usb/s2255/s2255drv.c:1557:5-24: WARNING: atomic_dec_and_test variation before object free at line 1558. Link: https://lore.kernel.org/linux-media/20240429-fix-cocci-v3-11-3c4865f5a4b0@chromium.org Signed-off-by: Ricardo Ribalda <ribalda@chromium.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2024-05-03media: go7007: Use min and max macrosRicardo Ribalda1-2/+2
Replace ternary inline selection of f1 and f2 min max values with min() and max() helper functions for the sake of readability and to make coccinelle happier drivers/media/usb/go7007/go7007-fw.c:1292:14-15: WARNING opportunity for max() drivers/media/usb/go7007/go7007-fw.c:1293:14-15: WARNING opportunity for min() Link: https://lore.kernel.org/linux-media/20240429-fix-cocci-v3-5-3c4865f5a4b0@chromium.org Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Ricardo Ribalda <ribalda@chromium.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2024-05-03media: uvcvideo: Use max() macroRicardo Ribalda1-1/+1
It makes the code slightly more clear and makes cocci incredibly happy: drivers/media/usb/uvc/uvc_ctrl.c:839:22-23: WARNING opportunity for max() Link: https://lore.kernel.org/linux-media/20240429-fix-cocci-v3-4-3c4865f5a4b0@chromium.org Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org> Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Signed-off-by: Ricardo Ribalda <ribalda@chromium.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2024-04-29media: dw2102: fix a potential buffer overflowMauro Carvalho Chehab1-1/+1
As pointed by smatch: drivers/media/usb/dvb-usb/dw2102.c:802 su3000_i2c_transfer() error: __builtin_memcpy() '&state->data[4]' too small (64 vs 67) That seemss to be due to a wrong copy-and-paste. Fixes: 0e148a522b84 ("media: dw2102: Don't translate i2c read into write") Reported-by: Hans Verkuil <hverkuil@xs4all.nl> Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2024-04-29media: IR remote control for AVerMedia TD310Alex Volkov1-1/+9
Uses NEC defaults as other non-eeprom devices. Link: https://lore.kernel.org/linux-media/2273969.FyfRTN5kjP@bootes Signed-off-by: Alex Volkov <alex@bootes.sytes.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2024-04-29media: flexcop-usb: fix sanity check of bNumEndpointsDongliang Mu1-1/+1
Commit d725d20e81c2 ("media: flexcop-usb: sanity checking of endpoint type ") adds a sanity check for endpoint[1], but fails to modify the sanity check of bNumEndpoints. Fix this by modifying the sanity check of bNumEndpoints to 2. Link: https://lore.kernel.org/linux-media/20220602055027.849014-1-dzm91@hust.edu.cn Fixes: d725d20e81c2 ("media: flexcop-usb: sanity checking of endpoint type") Signed-off-by: Dongliang Mu <mudongliangabcd@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2024-04-29media: flexcop: allow for modern speedsOliver Neukum1-0/+6
High speed is no longer the ultimate in speed. Link: https://lore.kernel.org/linux-media/20220517131109.28371-2-oneukum@suse.com Signed-off-by: Oliver Neukum <oneukum@suse.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2024-04-29media: flexcop: unneeded ATOMICOliver Neukum1-2/+2
No need for GFP_ATOMIC during probe() Link: https://lore.kernel.org/linux-media/20220517131109.28371-1-oneukum@suse.com Signed-off-by: Oliver Neukum <oneukum@suse.com> Reviewed-by: Johan Hovold <johan@kernel.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2024-04-29media: as102: avoid GFP_ATOMICOliver Neukum1-1/+1
No need for GFP_ATOMIC during probe() Link: https://lore.kernel.org/linux-media/20220517111049.25611-1-oneukum@suse.com Signed-off-by: Oliver Neukum <oneukum@suse.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2024-04-29media: dw2102: fix coding style issuesMauro Carvalho Chehab1-141/+132
Use checkpatch --strict --in-place to cleanup most style issues. Then, do some manual work to fix most of the remaining issues. Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2024-04-29media: dw2102: Fix minor issuesMichael Bunk1-41/+48
Found by checkpatch. Link: https://lore.kernel.org/linux-media/20220116112238.74171-4-micha@freedict.org Signed-off-by: Michael Bunk <micha@freedict.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2024-04-29media: dw2102: Dont't list TT Cinergy S2 R4 twiceMichael Bunk1-3/+1
"modinfo dvb-usb-dw2102|grep 0105" returns two lines, because the module reports this usb alias twice. Remove one of them. Signed-off-by: Michael Bunk <micha@freedict.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2024-04-29media: dw2102: Don't translate i2c read into writeMichael Bunk1-47/+73
The code ignored the I2C_M_RD flag on I2C messages. Instead it assumed an i2c transaction with a single message must be a write operation and a transaction with two messages would be a read operation. Though this works for the driver code, it leads to problems once the i2c device is exposed to code not knowing this convention. For example, I did "insmod i2c-dev" and issued read requests from userspace, which were translated into write requests and destroyed the EEPROM of my device. So, just check and respect the I2C_M_READ flag, which indicates a read when set on a message. If it is absent, it is a write message. Incidentally, changing from the case statement to a while loop allows the code to lift the limitation to two i2c messages per transaction. There are 4 more *_i2c_transfer functions affected by the same behaviour and limitation that should be fixed in the same way. Link: https://lore.kernel.org/linux-media/20220116112238.74171-2-micha@freedict.org Signed-off-by: Michael Bunk <micha@freedict.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2024-04-24media: stk1160: fix bounds checking in stk1160_copy_video()Dan Carpenter1-5/+15
The subtract in this condition is reversed. The ->length is the length of the buffer. The ->bytesused is how many bytes we have copied thus far. When the condition is reversed that means the result of the subtraction is always negative but since it's unsigned then the result is a very high positive value. That means the overflow check is never true. Additionally, the ->bytesused doesn't actually work for this purpose because we're not writing to "buf->mem + buf->bytesused". Instead, the math to calculate the destination where we are writing is a bit involved. You calculate the number of full lines already written, multiply by two, skip a line if necessary so that we start on an odd numbered line, and add the offset into the line. To fix this buffer overflow, just take the actual destination where we are writing, if the offset is already out of bounds print an error and return. Otherwise, write up to buf->length bytes. Fixes: 9cb2173e6ea8 ("[media] media: Add stk1160 new driver (easycap replacement)") Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org> Reviewed-by: Ricardo Ribalda <ribalda@chromium.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-26 20:42:26 +0300