summaryrefslogtreecommitdiff
path: root/drivers/media/tuners
AgeCommit message (Collapse)AuthorFilesLines
2015-06-23[media] tuner-i2c: be consistent with I2C declarationMauro Carvalho Chehab1-4/+6
On alpha, gcc warns a log about signed/unsigned ballance, with produces 3185 warnings. Ok, this is bogus, but it indicates that the declaration at V4L2 side is not consistent with the one at I2C. With this trivial patch, the number of errors reduce to 2959 warnings. Still too much, but it is 7.1% less. So let's do it. Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-06-09[media] fc2580: add missing error status when probe() failsAntti Palosaari1-0/+1
We must return -ENODEV error on case probe() fails to detect chip. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-06-05[media] si2157: implement signal strength statsAntti Palosaari2-1/+40
Implement DVBv5 signal strength stats. Returns dBm. Signed-off-by: Antti Palosaari <crope@iki.fi> Tested-by: Adam Baker <linux@baker-net.org.uk> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-05-30[media] e4000: fix compiler warningHans Verkuil1-1/+1
drivers/media/tuners/e4000.c:287:3: warning: this decimal constant is unsigned only in ISO C90 .rangehigh = 2208000000L, ^ Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Cc: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-05-20[media] e4000: Fix rangehigh valueMauro Carvalho Chehab1-1/+1
As reported by smatch: drivers/media/tuners/e4000.c:287:32: warning: constant 2208000000 is so big it is long long drivers/media/tuners/e4000.c:287:32: warning: decimal constant 2208000000 is between LONG_MAX and ULONG_MAX. For C99 that means long long, C90 compilers are very likely to produce unsigned long (and a warning) here drivers/media/tuners/e4000.c:287:3: warning: this decimal constant is unsigned only in ISO C90 .rangehigh = 2208000000, ^ Cc: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-05-20[media] e4000: implement V4L2 subdevice tuner and core opsAntti Palosaari2-36/+182
Implement V4L2 subdevice tuner and core ops. After that this driver is hybrid driver implementing both V4L2 and DVB ops. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-05-20[media] e4000: various small changesAntti Palosaari3-186/+178
* Rename device state from 's' to 'dev'. * Move single include to driver private header. * Change error handling type of each function to one I tend use nowadays. * Remove dummy register write from init. Even Windows driver does this multiple times remove it as I have never seen any I2C errors. * Define I2C client pointer for each function and use it. * Do not clean tuner ops during driver remove - not needed. * Disable sysfs device bind / unbind. We are not allowed manually bind / unbind device from the driver currently. * Rename some other variables. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-05-20[media] e4000: revise synthesizer calculationAntti Palosaari2-15/+33
Update synthesizer calculation to model I prefer nowadays. It is mostly just renaming some variables to ones I think are most standard. Also add 'schematic' of synthesizer following my current understanding. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-05-18[media] fc2580: implement V4L2 subdevice for SDR controlAntti Palosaari3-29/+249
Implement V4L2 subdevice for bandwidth and frequency controls of SDR usage. That driver now implements both DVB frontend and V4L2 subdevice. Driver itself is I2C driver. Lets see how it works. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-05-18[media] fc2580: calculate filter control word dynamicallyAntti Palosaari2-9/+8
Calculate low-pass filter control word dynamically from given radio channel bandwidth. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-05-18[media] tua9001: use div_u64() for frequency calculationAntti Palosaari2-8/+2
Use div_u64() to simplify and remove home made divides. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-05-18[media] tua9001: use regmap for I2C register accessAntti Palosaari3-29/+15
Use regmap for I2C register access. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-05-18[media] tua9001: various minor changesAntti Palosaari4-94/+83
Fix logging. Style issues. Rename things. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-05-18[media] tua9001: remove media attachAntti Palosaari2-104/+4
We are using I2C client binding now, so remove old media attach. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-05-18[media] tua9001: add I2C bindingsAntti Palosaari3-3/+114
Add I2C bindings. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-05-18[media] fc2580: use regmap for register I2C accessAntti Palosaari3-155/+66
Replace home made register access routines with regmap. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-05-18[media] fc2580: cleanups and variable renamesAntti Palosaari2-98/+76
Rename driver state from priv to dev. Remove legacy i2c-gate control. Use I2C client for proper dev_() logging. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-05-18[media] fc2580: improve set params logicAntti Palosaari2-99/+88
Calculate PLL dividers slightly differently, most likely it is now correct. Move some register values to innitab. Use jiffies to poll filter lock. Fix logging. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-05-18[media] fc2580: remove obsolete media attachAntti Palosaari2-98/+0
All users are using driver via I2C client binding so lets remove unneeded media binding. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-05-18[media] fc2580: implement I2C client bindingsAntti Palosaari3-10/+110
Add I2C client bindings to driver. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-05-15[media] fc0013: remove unneeded testLaurent Navet1-2/+0
The same code is executed if ret is true or false, so this test can be removed. Fix Coverity CID 1268782. Signed-off-by: Laurent Navet <laurent.navet@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-05-14[media] msi001: cleanups / renamesAntti Palosaari1-94/+101
Rename state from s to dev. Rename some other things. Fix indentations. Disable driver unbind via sysfs. indentation prevent unload Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-05-14[media] msi001: revise synthesizer calculationAntti Palosaari1-30/+44
Update synthesizer calculation to model I prefer nowadays. It is mostly just renaming some variables, but also minor functionality change how integer and fractional part are divided (using div_u64_rem()). Also, add 'schematic' of synthesizer following my current understanding. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-05-13[media] R820T tuner needs CONFIG_BITREVERSEArnd Bergmann1-0/+1
In a rarely hit randconfig case, the r820t tuner driver can get built when CONFIG_BITREVERSE is not selected by any other driver, resulting in this error: drivers/built-in.o: In function `r820t_read.constprop.3': :(.text+0xa0594): undefined reference to `byte_rev_table' For consistency, this adds the 'select BITREVERSE' that all other similar drivers have. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-05-12[media] si2157: support selection of IF interfaceOlli Salonen3-1/+10
The chips supported by the si2157 driver have two IF outputs (either pins 12+13 or pins 9+11). Instead of hardcoding the output to be used add an option to choose which output shall be used. As this patch changes the default behaviour, the IF interface is specified in each driver currently using si2157 driver. This is to keep bisectability. Signed-off-by: Olli Salonen <olli.salonen@iki.fi> Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-05-08media: replace bellow -> belowMauro Carvalho Chehab1-1/+1
Bellow is yelling. Ok, sometimes the code is yells a lot, but but this is not the case there ;) Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-05-01[media] r820t: fix identingMauro Carvalho Chehab1-2/+2
drivers/media/tuners/r820t.c:945 r820t_sysfreq_sel() warn: inconsistent indenting Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-04-30[media] qt1010: avoid going past arrayMauro Carvalho Chehab1-1/+5
As reported by smatch: drivers/media/tuners/qt1010.c:357 qt1010_init() error: buffer overflow 'i2c_data' 34 <= 34 This should not happen with the current code, as the i2c_data array doesn't end with a QT1010_M1, but it doesn't hurt add a BUG_ON to notify if one modifies it and breaks. Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-04-30[media] qt1010: Reduce text size by using static constMauro Carvalho Chehab1-1/+1
Using static const allows the compiler to optimize the code. Before static const: text data bss dec hex filename 4982 524 1568 7074 1ba2 drivers/media/tuners/qt1010.o After static const: text data bss dec hex filename 4714 524 1568 6806 1a96 drivers/media/tuners/qt1010.o Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-04-21Merge branch 'drm-next-merged' of ↵Mauro Carvalho Chehab1-1/+1
git://people.freedesktop.org/~airlied/linux into v4l_for_linus * 'drm-next-merged' of git://people.freedesktop.org/~airlied/linux: (9717 commits) media-bus: Fixup RGB444_1X12, RGB565_1X16, and YUV8_1X24 media bus format hexdump: avoid warning in test function fs: take i_mutex during prepare_binprm for set[ug]id executables smp: Fix error case handling in smp_call_function_*() iommu-common: Fix PARISC compile-time warnings sparc: Make LDC use common iommu poll management functions sparc: Make sparc64 use scalable lib/iommu-common.c functions Break up monolithic iommu table/lock into finer graularity pools and lock sparc: Revert generic IOMMU allocator. tools/power turbostat: correct dumped pkg-cstate-limit value tools/power turbostat: calculate TSC frequency from CPUID(0x15) on SKL tools/power turbostat: correct DRAM RAPL units on recent Xeon processors tools/power turbostat: Initial Skylake support tools/power turbostat: Use $(CURDIR) instead of $(PWD) and add support for O= option in Makefile tools/power turbostat: modprobe msr, if needed tools/power turbostat: dump MSR_TURBO_RATIO_LIMIT2 tools/power turbostat: use new MSR_TURBO_RATIO_LIMIT names Bluetooth: hidp: Fix regression with older userspace and flags validation config: Enable NEED_DMA_MAP_STATE by default when SWIOTLB is selected perf/x86/intel/pt: Fix and clean up error handling in pt_event_add() ... That solves several merge conflicts: Documentation/DocBook/media/v4l/subdev-formats.xml Documentation/devicetree/bindings/vendor-prefixes.txt drivers/staging/media/mn88473/mn88473.c include/linux/kconfig.h include/uapi/linux/media-bus-format.h The ones at subdev-formats.xml and media-bus-format.h are not trivial. That's why we opted to merge from DRM.
2015-04-14Merge branch 'for-linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial Pull trivial tree from Jiri Kosina: "Usual trivial tree updates. Nothing outstanding -- mostly printk() and comment fixes and unused identifier removals" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: goldfish: goldfish_tty_probe() is not using 'i' any more powerpc: Fix comment in smu.h qla2xxx: Fix printks in ql_log message lib: correct link to the original source for div64_u64 si2168, tda10071, m88ds3103: Fix firmware wording usb: storage: Fix printk in isd200_log_config() qla2xxx: Fix printk in qla25xx_setup_mode init/main: fix reset_device comment ipwireless: missing assignment goldfish: remove unreachable line of code coredump: Fix do_coredump() comment stacktrace.h: remove duplicate declaration task_struct smpboot.h: Remove unused function prototype treewide: Fix typo in printk messages treewide: Fix typo in printk messages mod_devicetable: fix comment for match_flags
2015-04-08[media] Add and use IS_REACHABLE macroArnd Bergmann27-27/+27
In the media drivers, the v4l2 core knows about all submodules and calls into them from a common function. However this cannot work if the modules that get called are loadable and the core is built-in. In that case we get drivers/built-in.o: In function `set_type': drivers/media/v4l2-core/tuner-core.c:301: undefined reference to `tea5767_attach' drivers/media/v4l2-core/tuner-core.c:307: undefined reference to `tea5761_attach' drivers/media/v4l2-core/tuner-core.c:349: undefined reference to `tda9887_attach' drivers/media/v4l2-core/tuner-core.c:405: undefined reference to `xc4000_attach' This was working previously, until the IS_ENABLED() macro was used to replace the construct like #if defined(CONFIG_DVB_CX24110) || (defined(CONFIG_DVB_CX24110_MODULE) && defined(MODULE)) with the difference that the new code no longer checks whether it is being built as a loadable module itself. To fix this, this new patch adds an 'IS_REACHABLE' macro, which evaluates true in exactly the condition that was used previously. The downside of this is that this trades an obvious link error for a more subtle runtime failure, but it is clear that the change that introduced the link error was unintentional and it seems better to revert it for now. Also, a similar change was originally created by Trent Piepho and then reverted by teh change to the IS_ENABLED macro. Ideally Kconfig would be used to avoid the case of a broken dependency, or the code restructured in a way to turn around the dependency, but either way would require much larger changes here. Fixes: 7b34be71db53 ("[media] use IS_ENABLED() macro") See-also: c5dec9fb248e ("V4L/DVB (4751): Fix DBV_FE_CUSTOMISE for card drivers compiled into kernel") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-04-08[media] xc5000: fix memory corruption when unplugging deviceDevin Heitmueller1-1/+4
This patch addresses a regression introduced in the following patch: commit 5264a522a597032c009f9143686ebf0fa4e244fb Author: Shuah Khan <shuahkh@osg.samsung.com> [media] media: tuner xc5000 - release firmwware from xc5000_release() The "priv" struct is actually reference counted, so the xc5000_release() function gets called multiple times for hybrid devices. Because release_firmware() was always being called, it would work fine as expected on the first call but then the second call would corrupt aribtrary memory. Set the pointer to NULL after releasing so that we don't call release_firmware() twice. This problem was detected in the HVR-950q where plugging/unplugging the device multiple times would intermittently show panics in completely unrelated areas of the kernel. Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com> Cc: Shuah Khan <shuahkh@osg.samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-04-08[media] r820t: enable flt_ext_wide for SYS_DVBC_ANNEX_A standardBenjamin Larsson1-1/+1
Signed-off-by: Benjamin Larsson <benjamin@southpole.se> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-04-08[media] r820t: add settings for SYS_DVBC_ANNEX_C standardBenjamin Larsson1-0/+12
Signed-off-by: Benjamin Larsson <benjamin@southpole.se> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-04-07[media] m88ts2022: remove from MakefileHans Verkuil1-1/+0
Remove target from Makefile: this driver no longer exists. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-04-03[media] m88ts2022: remove obsolete driverAntti Palosaari4-676/+0
This driver was replaced by ts2020 driver. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-04-03[media] m88ts2022: Nested loops shouldn't use the same index variableDavid Howells1-4/+4
There are a pair of nested loops inside m88ts2022_cmd() that use the same index variable, but for different things. Split the variable. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-04-03[media] r820t: change read_gain() code to match register layoutBenjamin Larsson1-1/+1
Signed-off-by: Benjamin Larsson <benjamin@southpole.se> Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-04-03[media] r820t: add DVBC profile in sysfreq_selBenjamin Larsson1-0/+13
This will make the Astrometa DVB-T/T2/C usb stick be able to pick up muxes around 290-314 MHz. Signed-off-by: Benjamin Larsson <benjamin@southpole.se> Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-04-01[media] si2157: extend frequency range for ATSCOlli Salonen1-1/+1
The Si2157 tuner supports ATSC in addition to DVB-T and DVB-C. Extend minimum frequency range to cover the complete ATSC/QAM-B range. Signed-off-by: Olli Salonen <olli.salonen@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-03-07treewide: Fix typo in printk messagesMasanari Iida1-1/+1
This patch fix spelling typo in printk messages. Signed-off-by: Masanari Iida <standby24x7@gmail.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2015-03-03[media] si2157: IF frequency for ATSC and QAMOlli Salonen2-1/+23
For supporting ATSC and QAM modes the driver should use a smaller IF frequency than 5 MHz. Signed-off-by: Olli Salonen <olli.salonen@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-01-29[media] si2157: change firmware variable name and typeAntti Palosaari1-8/+8
Rename firmware variable from fw_file to fw_name and change its type from u8 to const char as request_firmware() input is. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-01-29[media] si2157: print chip versionAntti Palosaari1-4/+7
Print chip version once using log level into when init() is called. Remove cold/warm state printing as those are not very useful. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-01-29[media] si2157: print firmware versionAntti Palosaari1-0/+11
Firmware version could be printed similarly than si2168 driver does. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-01-29[media] si2157: add own goto label for kfree() on probe errorAntti Palosaari1-2/+4
Use own goto label for error case mem free is needed, even kfree could be called with NULL. I think it is better to have it, even not required. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-01-29[media] si2157: trivial ID table changesAntti Palosaari1-5/+5
- Rename ID table. - Remove magic numbers from ID table driver data field. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-01-29[media] si2157: change firmware download error handlingAntti Palosaari1-5/+4
Rename firmare download error path goto label. Remove firmware NULL set as NULL value is not needed anymore, due to recent change which started using goto labels for firmware error handling. Cc: Olli Salonen <olli.salonen@iki.fi> Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
2015-01-29[media] si2157: carry pointer to client instead of state in tuner_privAntti Palosaari2-41/+38
Carry struct i2c_client pointer in tuner_priv. This driver is I2C driver, which is represented as a struct i2c_client, so better to carry this top level structure for each routine in order to unify things. Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-24 19:31:41 +0300