summaryrefslogtreecommitdiff
path: root/drivers/media/platform
AgeCommit message (Collapse)AuthorFilesLines
2017-08-26media: venus: venc: set correct resolution on compressed streamStanimir Varbanov1-3/+5
This change the alignment restriction for output type of buffers only, also set corect input resolution and fill bidirectional vb2 queue flag in order to map output type buffers read/write. The last is needed by encoder firmware to add padding at the bottom of output (input buffers). Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org> Signed-off-by: Hans Verkuil <hansverk@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-26media: stm32-dcmi: g_/s_selection crop supportHugues Fruchet1-4/+370
Implements g_/s_selection crop support by using DCMI crop hardware feature. User can first get the maximum supported resolution of the sensor by calling g_selection(V4L2_SEL_TGT_CROP_BOUNDS). Then user call to s_selection(V4L2_SEL_TGT_CROP) will reset sensor to its maximum resolution and crop request is saved for later usage in s_fmt(). Next call to s_fmt() will check if sensor can do frame size request with crop request. If sensor supports only discrete frame sizes, the frame size which is larger than user request is selected in order to be able to match the crop request. Then s_fmt() resolution user request is adjusted to match crop request resolution. Signed-off-by: Hugues Fruchet <hugues.fruchet@st.com> Signed-off-by: Hans Verkuil <hansverk@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-26media: stm32-dcmi: cleanup variable/fields namingsHugues Fruchet1-49/+54
Uniformize "pixfmt" variables to "pix". Change "current_fmt" & "dcmi_fmt" variables to variables with "sd_" prefix to explicitly refer to subdev format. Signed-off-by: Hugues Fruchet <hugues.fruchet@st.com> Signed-off-by: Hans Verkuil <hansverk@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-26media: stm32-dcmi: revisit control register handlingHugues Fruchet1-10/+4
Simplify bits handling of DCMI_CR register. Signed-off-by: Hugues Fruchet <hugues.fruchet@st.com> Signed-off-by: Hans Verkuil <hansverk@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-26media: stm32-dcmi: catch dma submission errorHugues Fruchet1-0/+4
Test cookie return by dmaengine_submit() and return error if any. Signed-off-by: Hugues Fruchet <hugues.fruchet@st.com> Signed-off-by: Hans Verkuil <hansverk@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-26media: venus: venc: drop VP9 codec supportStanimir Varbanov1-4/+0
No one of the supported Venus version has implemented VP9 codec for enconding, so drop it from the list of codecs. Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-26media: venus: use helper function to check supported codecsStanimir Varbanov2-16/+36
Use the helper function in decoder and encoder find_format to runtime check supported codecs. Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-26media: venus: add helper to check supported codecsStanimir Varbanov2-0/+50
Adds a helper function to runtime check supported encoder and decoder codecs depending on venus version and platform. Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-26media: venus: fill missing video_device nameStanimir Varbanov2-0/+2
This fills missing (forgotten) video device name with appropriate string so that udev can distinguishes between decoder and encoder devices. Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-26media: venus: mark venc and vdec PM functions as __maybe_unusedStanimir Varbanov2-8/+4
Without PM support gcc could warns about unused functions, thus mark runtime_suspend/resume as __maybe_unused. Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-26media: stm32-cec: use CEC_CAP_DEFAULTSHans Verkuil1-3/+1
Use the new CEC_CAP_DEFAULTS define in this driver. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Benjamin Gaignard <benjamin.gaignard@linaro.org> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-26media: stih-cec: use CEC_CAP_DEFAULTSHans Verkuil1-3/+1
Use the new CEC_CAP_DEFAULTS define in this driver. This also adds the CEC_CAP_RC capability which was missing here (and this is also the reason for this new define, to avoid missing such capabilities). Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Benjamin Gaignard <benjamin.gaignard@linaro.org> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-26media: vivid: fix incorrect HDMI input/output CEC loggingHans Verkuil1-4/+4
Only the first HDMI input has a CEC adapter, so just report 'HDMI 0' as the HDMI input name. For the HDMI outputs use bus_cnt instead of i as the output number. The HDMI name now corresponds to what 'v4l2-ctl --list-outputs' reports. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-26media: vivid: add CEC pin monitoring emulationHans Verkuil1-1/+64
Add support to emulate CEC pin monitoring. There are few hardware devices that support this, so being able to emulate it here helps developing software for this. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-20media: v4l: vsp1: Allow entities to participate in the partition algorithmKieran Bingham8-33/+166
The configuration of the pipeline and entities directly affects the inputs required to each entity for the partition algorithm. Thus it makes sense to involve those entities in the decision making process. Extend the entity ops API to provide an optional .partition() operation. This allows entities that affect the partition window to adapt the window based on their configuration. Entities implementing this operation must update the window parameter in place, which will then be passed up the pipeline. This creates a process whereby each entity describes what is required to satisfy the required output to its predecessor in the pipeline. Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Hans Verkuil <hansverk@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-20media: v4l: vsp1: Provide UDS register updatesKieran Bingham1-0/+14
Provide register definitions required for UDS phase and partition algorithm support. The registers and bits defined here are available on Gen3 hardware only. Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Hans Verkuil <hansverk@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-20media: v4l: vsp1: Move partition rectangles to struct and operate directlyKieran Bingham5-43/+51
As we develop the partition algorithm, we need to store more information per partition to describe the phase and other parameters. To keep this data together, further abstract the existing v4l2_rect into a partition specific structure. As partitions only have horizontal coordinates, store the left and width values only. When generating the partition windows, operate directly on the partition struct rather than copying and duplicating the processed data Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Hans Verkuil <hansverk@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-20media: v4l: vsp1: Remove redundant context variablesKieran Bingham2-18/+7
The vsp1_pipe object context variables for div_size and current_partition allowed state to be maintained through processing the partitions during processing. Now that the partition tables are calculated during stream on, there is no requirement to store these variables in the pipe object. Utilise local variables for the processing as required. Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Hans Verkuil <hansverk@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-20media: v4l: vsp1: Calculate partition sizes at stream startKieran Bingham2-13/+34
Previously the active window and partition sizes for each partition were calculated for each partition every frame. This data is constant and only needs to be calculated once at the start of the stream. Extend the vsp1_pipe object to dynamically store the number of partitions required and pre-calculate the partition sizes into this table. Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Hans Verkuil <hansverk@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-20media: v4l: vsp1: Move vsp1_video_pipeline_setup_partitions() functionKieran Bingham1-37/+37
Separate the code change from the function move so that code changes can be clearly identified. This commit has no functional change. The partition algorithm functions will be changed, and vsp1_video_pipeline_setup_partitions() will call vsp1_video_partition(). To prepare for that, move the function without any code change. Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Hans Verkuil <hansverk@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-20media: v4l: vsp1: Release buffers in start_streaming error pathKieran Bingham1-8/+16
Presently any received buffers are only released back to vb2 if vsp1_video_stop_streaming() is called. If vsp1_video_start_streaming() encounters an error, we will be warned by the vb2 handlers that buffers have not been returned. Move the buffer cleanup code to its own function to prevent duplication and call from both vsp1_video_stop_streaming() and the error path in vsp1_video_start_streaming(). Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Hans Verkuil <hansverk@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-20media: coda/imx-vdoa: Check for platform_get_resource() errorFabio Estevam1-0/+2
platform_get_resource() may fail and in this case a NULL dereference will occur. Prevent this from happening by returning an error on platform_get_resource() failure. Fixes: b0444f18e0b18abce ("[media] coda: add i.MX6 VDOA driver") Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-20media: davinci: constify platform_device_idArvind Yadav2-2/+2
platform_device_id are not supposed to change at runtime. All functions working with platform_device_id provided by <linux/platform_device.h> work with const platform_device_id. So mark the non-const structs as const. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-20media: coda: constify platform_device_idArvind Yadav1-1/+1
platform_device_id are not supposed to change at runtime. All functions working with platform_device_id provided by <linux/platform_device.h> work with const platform_device_id. So mark the non-const structs as const. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Acked-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-20media: mtk-mdp: use IS_ERR to check return value of of_clk_getPan Bian1-2/+2
Function of_clk_get() returns an ERR_PTR on failures. In file mtk_mdp_commp.c, its return value is checked against NULL. Such checks cannot prevent from accessing bad memory. This patch replaces the NULL checks with IS_ERR checks. Signed-off-by: Pan Bian <bianpan2016@163.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-20media: Convert to using %pOF instead of full_nameRob Herring14-70/+63
Now that we have a custom printf format specifier, convert users of full_name to use %pOF instead. This is preparation to remove storing of the full path string for each node. Signed-off-by: Rob Herring <robh@kernel.org> Acked-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com> Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com> Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Andrzej Hajda <a.hajda@samsung.com> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: Songjun Wu <songjun.wu@microchip.com> Cc: Kukjin Kim <kgene@kernel.org> Cc: Krzysztof Kozlowski <krzk@kernel.org> Cc: Javier Martinez Canillas <javier@osg.samsung.com> Cc: Minghsiu Tsai <minghsiu.tsai@mediatek.com> Cc: Houlong Wei <houlong.wei@mediatek.com> Cc: Andrew-CT Chen <andrew-ct.chen@mediatek.com> Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Cc: Hyun Kwon <hyun.kwon@xilinx.com> Cc: Michal Simek <michal.simek@xilinx.com> Cc: "Sören Brinkmann" <soren.brinkmann@xilinx.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-samsung-soc@vger.kernel.org Cc: linux-mediatek@lists.infradead.org Cc: linux-renesas-soc@vger.kernel.org Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-20media: omap3isp: Quit using struct v4l2_subdev.host_priv fieldSakari Ailus6-37/+25
struct v4l2_subdev.host_priv is intended to be used by another driver. This is hardly good design but back in the days of platform data was a quick hack to get things done. As the sub-device specific bus information can be stored to the ISP driver specific struct allocated along with v4l2_async_subdev, keep the information there and only there. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-20media: omap3isp: csiphy: Don't assume the CSI receiver is a CSI2 moduleSakari Ailus4-30/+27
The CSI PHY is associated with a CSI receiver. The code assumes this receiver is a CSI2 module and relies on the CSI2 module object heavily to access the ISP or pipeline objects. However, the receiver could also be a CSI1/CCP2 module. Pass a new CSI receiver entity pointer to the CSI PHY acquire function, and replace all hardcoded usage of the CSI2 module with that CSI receiver entity. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> # on Beagleboard-xM + MPT9P031 Acked-by: Pavel Machek <pavel@ucw.cz> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-20media: omap3isp: Always initialise isp and mutex for csiphy1Sakari Ailus1-2/+3
The PHY is still relevant for CCP2. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> # on Beagleboard-xM + MPT9P031 Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-20media: omap3isp: Correctly set IO_OUT_SEL and VP_CLK_POL for CCP2 modePavel Machek2-2/+9
ISP CSI1 module needs all the bits correctly set to work. Signed-off-by: Ivaylo Dimitrov <ivo.g.dimitrov.75@gmail.com> Signed-off-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> # on Beagleboard-xM + MPT9P031 Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-20media: omap3isp: Parse CSI1 configuration from the device treePavel Machek2-27/+79
Add support for parsing CSI1 configuration. Signed-off-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk> Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> # on Beagleboard-xM + MPT9P031 Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-20media: s5p-cec: use CEC_CAP_DEFAULTSHans Verkuil1-5/+2
Use the new CEC_CAP_DEFAULTS define in the s5p-cec driver. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-20media: pxa_camera: constify v4l2_clk_ops structureJulia Lawall1-1/+1
This v4l2_clk_ops structure is only passed as the first argument of v4l2_clk_register, which is const, so the v4l2_clk_ops structure can also be const. Done with the help of Coccinelle. Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-20media: exynos4-is: constify video_subdev structuresJulia Lawall2-2/+2
The v4l2_subdev_ops structures are only passed as the second argument of v4l2_subdev_init, which is const, so the v4l2_subdev_ops structures can be const as well. Done with the help of Coccinelle. Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-20media: vimc: constify video_subdev structuresJulia Lawall3-3/+3
These structures are all only stored in fields of v4l2_subdev_ops structures, all of which are const, so these structures can be const as well. Done with the help of Coccinelle. Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-20media: mtk-mdp: constify v4l2_m2m_ops structuresJulia Lawall1-1/+1
The v4l2_m2m_ops structures are only passed as the only argument to v4l2_m2m_init, which is declared as const. Thus the v4l2_m2m_ops structures themselves can be const. Done with the help of Coccinelle. // <smpl> @r disable optional_qualifier@ identifier i; position p; @@ static struct v4l2_m2m_ops i@p = { ... }; @ok1@ identifier r.i; position p; @@ v4l2_m2m_init(&i@p) @bad@ position p != {r.p,ok1.p}; identifier r.i; struct v4l2_m2m_ops e; @@ e@i@p @depends on !bad disable optional_qualifier@ identifier r.i; @@ static +const struct v4l2_m2m_ops i = { ... }; // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-20media: exynos4-is: constify v4l2_m2m_ops structuresJulia Lawall1-1/+1
The v4l2_m2m_ops structures are only passed as the only argument to v4l2_m2m_init, which is declared as const. Thus the v4l2_m2m_ops structures themselves can be const. Done with the help of Coccinelle. // <smpl> @r disable optional_qualifier@ identifier i; position p; @@ static struct v4l2_m2m_ops i@p = { ... }; @ok1@ identifier r.i; position p; @@ v4l2_m2m_init(&i@p) @bad@ position p != {r.p,ok1.p}; identifier r.i; struct v4l2_m2m_ops e; @@ e@i@p @depends on !bad disable optional_qualifier@ identifier r.i; @@ static +const struct v4l2_m2m_ops i = { ... }; // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-20media: vim2m: constify v4l2_m2m_ops structuresJulia Lawall1-1/+1
The v4l2_m2m_ops structures are only passed as the only argument to v4l2_m2m_init, which is declared as const. Thus the v4l2_m2m_ops structures themselves can be const. Done with the help of Coccinelle. // <smpl> @r disable optional_qualifier@ identifier i; position p; @@ static struct v4l2_m2m_ops i@p = { ... }; @ok1@ identifier r.i; position p; @@ v4l2_m2m_init(&i@p) @bad@ position p != {r.p,ok1.p}; identifier r.i; struct v4l2_m2m_ops e; @@ e@i@p @depends on !bad disable optional_qualifier@ identifier r.i; @@ static +const struct v4l2_m2m_ops i = { ... }; // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-20media: mx2-emmaprp: constify v4l2_m2m_ops structuresJulia Lawall1-1/+1
The v4l2_m2m_ops structures are only passed as the only argument to v4l2_m2m_init, which is declared as const. Thus the v4l2_m2m_ops structures themselves can be const. Done with the help of Coccinelle. // <smpl> @r disable optional_qualifier@ identifier i; position p; @@ static struct v4l2_m2m_ops i@p = { ... }; @ok1@ identifier r.i; position p; @@ v4l2_m2m_init(&i@p) @bad@ position p != {r.p,ok1.p}; identifier r.i; struct v4l2_m2m_ops e; @@ e@i@p @depends on !bad disable optional_qualifier@ identifier r.i; @@ static +const struct v4l2_m2m_ops i = { ... }; // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-20media: m2m-deinterlace: constify v4l2_m2m_ops structuresJulia Lawall1-1/+1
The v4l2_m2m_ops structures are only passed as the only argument to v4l2_m2m_init, which is declared as const. Thus the v4l2_m2m_ops structures themselves can be const. Done with the help of Coccinelle. // <smpl> @r disable optional_qualifier@ identifier i; position p; @@ static struct v4l2_m2m_ops i@p = { ... }; @ok1@ identifier r.i; position p; @@ v4l2_m2m_init(&i@p) @bad@ position p != {r.p,ok1.p}; identifier r.i; struct v4l2_m2m_ops e; @@ e@i@p @depends on !bad disable optional_qualifier@ identifier r.i; @@ static +const struct v4l2_m2m_ops i = { ... }; // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-20media: bdisp: constify v4l2_m2m_ops structuresJulia Lawall1-1/+1
The v4l2_m2m_ops structures are only passed as the only argument to v4l2_m2m_init, which is declared as const. Thus the v4l2_m2m_ops structures themselves can be const. Done with the help of Coccinelle. // <smpl> @r disable optional_qualifier@ identifier i; position p; @@ static struct v4l2_m2m_ops i@p = { ... }; @ok1@ identifier r.i; position p; @@ v4l2_m2m_init(&i@p) @bad@ position p != {r.p,ok1.p}; identifier r.i; struct v4l2_m2m_ops e; @@ e@i@p @depends on !bad disable optional_qualifier@ identifier r.i; @@ static +const struct v4l2_m2m_ops i = { ... }; // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-20media: exynos-gsc: constify v4l2_m2m_ops structuresJulia Lawall1-1/+1
The v4l2_m2m_ops structures are only passed as the only argument to v4l2_m2m_init, which is declared as const. Thus the v4l2_m2m_ops structures themselves can be const. Done with the help of Coccinelle. // <smpl> @r disable optional_qualifier@ identifier i; position p; @@ static struct v4l2_m2m_ops i@p = { ... }; @ok1@ identifier r.i; position p; @@ v4l2_m2m_init(&i@p) @bad@ position p != {r.p,ok1.p}; identifier r.i; struct v4l2_m2m_ops e; @@ e@i@p @depends on !bad disable optional_qualifier@ identifier r.i; @@ static +const struct v4l2_m2m_ops i = { ... }; // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-20media: vcodec: mediatek: constify v4l2_m2m_ops structuresJulia Lawall1-1/+1
The v4l2_m2m_ops structures are only passed as the only argument to v4l2_m2m_init, which is declared as const. Thus the v4l2_m2m_ops structures themselves can be const. Done with the help of Coccinelle. // <smpl> @r disable optional_qualifier@ identifier i; position p; @@ static struct v4l2_m2m_ops i@p = { ... }; @ok1@ identifier r.i; position p; @@ v4l2_m2m_init(&i@p) @bad@ position p != {r.p,ok1.p}; identifier r.i; struct v4l2_m2m_ops e; @@ e@i@p @depends on !bad disable optional_qualifier@ identifier r.i; @@ static +const struct v4l2_m2m_ops i = { ... }; // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Acked-by: Rick Chang <rick.chang@mediatek.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-20media: V4L2: platform: rcar_jpu: constify v4l2_m2m_ops structuresJulia Lawall1-1/+1
The v4l2_m2m_ops structures are only passed as the only argument to v4l2_m2m_init, which is declared as const. Thus the v4l2_m2m_ops structures themselves can be const. Done with the help of Coccinelle. // <smpl> @r disable optional_qualifier@ identifier i; position p; @@ static struct v4l2_m2m_ops i@p = { ... }; @ok1@ identifier r.i; position p; @@ v4l2_m2m_init(&i@p) @bad@ position p != {r.p,ok1.p}; identifier r.i; struct v4l2_m2m_ops e; @@ e@i@p @depends on !bad disable optional_qualifier@ identifier r.i; @@ static +const struct v4l2_m2m_ops i = { ... }; // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Acked-by: Ulyanov Mikhail <mikhail.ulyanov@cogentembedded.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-20media: s5p-g2d: constify v4l2_m2m_ops structuresJulia Lawall1-1/+1
The v4l2_m2m_ops structures are only passed as the only argument to v4l2_m2m_init, which is declared as const. Thus the v4l2_m2m_ops structures themselves can be const. Done with the help of Coccinelle. // <smpl> @r disable optional_qualifier@ identifier i; position p; @@ static struct v4l2_m2m_ops i@p = { ... }; @ok1@ identifier r.i; position p; @@ v4l2_m2m_init(&i@p) @bad@ position p != {r.p,ok1.p}; identifier r.i; struct v4l2_m2m_ops e; @@ e@i@p @depends on !bad disable optional_qualifier@ identifier r.i; @@ static +const struct v4l2_m2m_ops i = { ... }; // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-20media: ti-vpe: vpe: constify v4l2_m2m_ops structuresJulia Lawall1-1/+1
The v4l2_m2m_ops structures are only passed as the only argument to v4l2_m2m_init, which is declared as const. Thus the v4l2_m2m_ops structures themselves can be const. Done with the help of Coccinelle. // <smpl> @r disable optional_qualifier@ identifier i; position p; @@ static struct v4l2_m2m_ops i@p = { ... }; @ok1@ identifier r.i; position p; @@ v4l2_m2m_init(&i@p) @bad@ position p != {r.p,ok1.p}; identifier r.i; struct v4l2_m2m_ops e; @@ e@i@p @depends on !bad disable optional_qualifier@ identifier r.i; @@ static +const struct v4l2_m2m_ops i = { ... }; // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-20media: st-delta: constify v4l2_m2m_ops structuresJulia Lawall1-1/+1
The v4l2_m2m_ops structures are only passed as the only argument to v4l2_m2m_init, which is declared as const. Thus the v4l2_m2m_ops structures themselves can be const. Done with the help of Coccinelle. // <smpl> @r disable optional_qualifier@ identifier i; position p; @@ static struct v4l2_m2m_ops i@p = { ... }; @ok1@ identifier r.i; position p; @@ v4l2_m2m_init(&i@p) @bad@ position p != {r.p,ok1.p}; identifier r.i; struct v4l2_m2m_ops e; @@ e@i@p @depends on !bad disable optional_qualifier@ identifier r.i; @@ static +const struct v4l2_m2m_ops i = { ... }; // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-20media: blackfin: bfin_capture: constify vb2_ops structuresJulia Lawall1-1/+1
These vb2_ops structures are only stored in the ops field of a vb2_queue structure, which is declared as const. Thus the vb2_ops structures themselves can be const. Done with the help of Coccinelle. // <smpl> @r disable optional_qualifier@ identifier i; position p; @@ static struct vb2_ops i@p = { ... }; @ok@ identifier r.i; struct vb2_queue e; position p; @@ e.ops = &i@p; @bad@ position p != {r.p,ok.p}; identifier r.i; struct vb2_ops e; @@ e@i@p @depends on !bad disable optional_qualifier@ identifier r.i; @@ static +const struct vb2_ops i = { ... }; // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-20media: davinci: vpbe: constify vb2_ops structuresJulia Lawall1-1/+1
These vb2_ops structures are only stored in the ops field of a vb2_queue structure, which is declared as const. Thus the vb2_ops structures themselves can be const. Done with the help of Coccinelle. // <smpl> @r disable optional_qualifier@ identifier i; position p; @@ static struct vb2_ops i@p = { ... }; @ok@ identifier r.i; struct vb2_queue e; position p; @@ e.ops = &i@p; @bad@ position p != {r.p,ok.p}; identifier r.i; struct vb2_ops e; @@ e@i@p @depends on !bad disable optional_qualifier@ identifier r.i; @@ static +const struct vb2_ops i = { ... }; // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
2017-08-20media: s5p-jpeg: directly use parsed subsampling on exynos5433Andrzej Pietrasiewicz1-1/+2
On exynos5433 variant JPEG data is parsed by hardware only from SOS marker, so subsampling is parsed by software. As such, its value need not to be translated from hardware-specific encoding to V4L2 encoding. Signed-off-by: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-29 18:59:48 +0300