summaryrefslogtreecommitdiff
path: root/drivers/media/platform
AgeCommit message (Collapse)AuthorFilesLines
2013-06-28[media] exynos4-is: Change fimc-is firmware file namesSylwester Nawrocki1-2/+2
This patch changes the firmware file names of the FIMC-IS subsystem. It is needed since there are different firmwares used across various SoC series, e.g. Exynos4 and Exynos5. Also the sensor specific "setfile" name is changed, to account for it depends on an image sensor and is also specific to the FIMC-IS and the SoC. This is a change for a driver merged in 3.10. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-06-28[media] exynos4-is: Add support for Exynos5250 MIPI-CSISSylwester Nawrocki1-11/+56
Add compatible property for the Exynos5250 and enable the frame start and frame end interrupts. These interrupts are needed for the Exynos5 FIMC-IS firmware. The driver enables those interrupt only where available, depending on the 'compatible' property. This can be optimized further, by exposing some API at the subdev driver, so the host driver can enable extra interrupts only for the image processing chains involving FIMC-IS. Signed-off-by: Shaik Ameer Basha <shaik.ameer@samsung.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-06-28[media] exynos4-is: Add Exynos5250 SoC support to fimc-lite driverSylwester Nawrocki4-14/+121
This patch adds support for the Exynos5250 SoC variant of the FIMC-LITE IP. A 'compatible' string is added for Exynos5250 compatible devices and the capture DMA handling is reworked to use the FLITE_REG_CIFCNTSEQ register, masking output DMA buffer address slots. The frame interrupt is enabled so there are now 2 interrupts per frame. This likely can be optimized in future by using any status registers that allow to figure out what the last and the currently written frame buffer is. It would also be more reliable in cases where there are high interrupt service latencies. Signed-off-by: Shaik Ameer Basha <shaik.ameer@samsung.com> Signed-off-by: Arun Kumar K <arun.kk@samsung.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-06-28[media] exynos4-is: Drop drvdata handling in fimc-lite for non-dt platformsSylwester Nawrocki2-6/+0
The FIMC-LITE IP block is available only on platforms instantiated from device tree. Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-06-28[media] mem2mem: set missing v4l2_dev pointerHans Verkuil3-1/+4
The m2m-deinterlace, mem2mem_testdev and mx2_emmaprp drivers didn't set the v4l2_dev pointer in struct video_device, even though a v4l2_device was registered correctly. These days this v4l2_dev pointer must be set correctly, so this patch adds that for these three drivers. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-06-28[media] omap_vout: fix compiler warningHans Verkuil1-2/+1
media-git/drivers/media/platform/omap/omap_vout.c: In function ‘omapvid_init’: media-git/drivers/media/platform/omap/omap_vout.c:382:17: warning: ‘mode’ may be used uninitialized in this function [-Wmaybe-uninitialized] vout->dss_mode = video_mode_to_dss_mode(vout); ^ media-git/drivers/media/platform/omap/omap_vout.c:332:23: note: ‘mode’ was declared here enum omap_color_mode mode; ^ Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Prabhakar Lad <prabhakar.lad@ti.com> Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-06-28[media] bfin_capture: fix compiler warningHans Verkuil1-1/+3
media-git/drivers/media/platform/blackfin/bfin_capture.c: In function ‘bcap_probe’: media-git/drivers/media/platform/blackfin/bfin_capture.c:1007:16: warning: ignoring return value of ‘vb2_queue_init’, declared with attribute warn_unused_result [-Wunused-result] vb2_queue_init(q); ^ Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Scott Jiang <scott.jiang.linux@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-06-28[media] V4L2: soc-camera: remove several CEU references in the generic scalerGuennadi Liakhovetski1-7/+8
The scaling / cropping library, that has been extracted from the CEU driver still contained a couple of references to the original hardware. Clean them up. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-06-28[media] V4L2: soc-camera: move generic functions into a separate fileGuennadi Liakhovetski5-388/+459
The sh_mobile_ceu_camera driver implements a generic algorithm for setting up an optimal client and host scaling and cropping configuration. This patch makes those functions available for all drivers. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-06-28[media] V4L2: sh_mobile_ceu_camera: remove CEU specific data from generic ↵Guennadi Liakhovetski1-59/+71
functions Several functions in the sh_mobile_ceu_camera driver implement generic algorithms and can be re-used by other V4L2 camera host drivers too. These functions attempt to optimise scaling and cropping functions of the subdevice, e.g. a camera sensor. This patch makes those functions generic for future re-use by other camera host drivers. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-06-28[media] V4L2: soc-camera: fix uninitialised use compiler warningGuennadi Liakhovetski1-1/+1
In scan_async_group() if the size parameter is negative, the sasd pointer will be used uninitialised: drivers/media/platform/soc_camera/soc_camera.c: In function "soc_camera_host_register": drivers/media/platform/soc_camera/soc_camera.c:1514:55: warning: "sasd" may be used uninitialized in this function [-Wmaybe-uninitialized] sasd->asd.match.i2c.adapter_id, sasd->asd.match.i2c.address); ^ drivers/media/platform/soc_camera/soc_camera.c:1464:34: note: "sasd" was declared here struct soc_camera_async_subdev *sasd; Fix this by making "size" and the array, from which it is assigned unsigned. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-06-28[media] V4L2: sh_vou: add I2C build dependencyGuennadi Liakhovetski1-1/+1
The sh_vou driver needs CONFIG_I2C or CONFIG_I2C_MODULE to build, add the respective dependency. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-06-25Merge branch 'v4l_for_linus' into patchworkMauro Carvalho Chehab4-21/+10
* v4l_for_linus: [media] Fix build when drivers are builtin and frontend modules [media] s5p makefiles: don't override other selections on obj-[ym] [media] exynos4-is: Fix FIMC-IS clocks initialization [media] rtl28xxu: fix buffer overflow when probing Rafael Micro r820t tuner Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-06-23console/font: Refactor font support code selection logicGeert Uytterhoeven1-1/+1
The current Makefile rules to build font support are messy and buggy. Replace them by Kconfig rules: - Introduce CONFIG_FONT_SUPPORT, which controls the building of all font code, - Select CONFIG_FONT_SUPPORT for all drivers that use fonts, - Select CONFIG_FONT_8x16 for all drivers that default to the VGA8x16 font, - Drop the bogus console dependency for CONFIG_VIDEO_VIVI, - Always process drivers/video/console/Makefile, as some drivers need fonts even if CONFIG_VT is not set. This fixes (if CONFIG_SOLO6X10=y and there are no built-in console drivers): drivers/built-in.o: In function `solo_osd_print': drivers/staging/media/solo6x10/solo6x10-enc.c:144: undefined reference to `.find_font' This fixes (if CONFIG_VT=n): drivers/built-in.o: In function `vivi_init': vivi.c:(.init.text+0x1a3da): undefined reference to `find_font' Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> [original part] Acked-by: Randy Dunlap <rdunlap@infradead.org> [drivers/video/Makefile]
2013-06-22Merge branch 'v4l_for_linus' of ↵Linus Torvalds4-21/+10
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media fixes from Mauro Carvalho Chehab: "Another set of fixes for Kernel 3.10. This series contain: - two Kbuild fixes for randconfig - a buffer overflow when using rtl28xuu with r820t tuner - one clk fixup on exynos4-is driver" * 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: [media] Fix build when drivers are builtin and frontend modules [media] s5p makefiles: don't override other selections on obj-[ym] [media] exynos4-is: Fix FIMC-IS clocks initialization [media] rtl28xxu: fix buffer overflow when probing Rafael Micro r820t tuner
2013-06-21[media] sh_mobile_ceu_camera: add asynchronous subdevice probing supportGuennadi Liakhovetski2-100/+187
Use the v4l2-async API to support asynchronous subdevice probing, including the CSI2 subdevice. Synchronous probing is still supported too. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-06-21[media] soc-camera: add V4L2-async supportGuennadi Liakhovetski1-85/+442
Add support for asynchronous subdevice probing, using the v4l2-async API. The legacy synchronous mode is still supported too, which allows to gradually update drivers and platforms. The selected approach adds a notifier for each struct soc_camera_device instance, i.e. for each video device node, even when there are multiple such instances registered with a single soc-camera host simultaneously. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-06-21[media] soc-camera: switch I2C subdevice drivers to use v4l2-clkGuennadi Liakhovetski2-38/+126
Instead of centrally enabling and disabling subdevice master clocks in soc-camera core, let subdevice drivers do that themselves, using the V4L2 clock API and soc-camera convenience wrappers. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-06-21[media] sh-mobile-ceu-driver: support max width and height in DTGuennadi Liakhovetski1-2/+21
Some CEU implementations have non-standard (larger) maximum supported width and height values. Add two OF properties to specify them. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-06-21[media] sh-mobile-ceu-camera: add primitive OF supportGuennadi Liakhovetski1-10/+23
Add an OF hook to sh_mobile_ceu_camera.c, no properties so far. Booting with DT also requires platform data to be optional. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-06-21[media] soc-camera: don't attach the client to the host during probingGuennadi Liakhovetski1-3/+3
During client probing we only have to turn on the host's clock, no need to actually attach the client to the host. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-06-21[media] soc-camera: make .clock_{start,stop} compulsory, .add / .remove optionalGuennadi Liakhovetski1-14/+13
All existing soc-camera host drivers use .clock_start() and .clock_stop() callbacks to activate and deactivate their camera interfaces, whereas .add() and .remove() callbacks are usually dummy. Make the former two compulsory and the latter two optional. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-06-21[media] sh-mobile-ceu-camera: move interface activation and deactivation to ↵Guennadi Liakhovetski1-23/+35
clock callbacks When adding and removing a client, the sh-mobile-ceu-camera driver activates and, respectively, deactivates its camera interface and, if necessary, the CSI2 controller. Only handling of the CSI2 interface is client-specific and is only needed, when a data-exchange with the client is taking place. Move the rest to .clock_start() and .clock_stop() callbacks. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-06-21[media] mx1-camera: move interface activation and deactivation to clock ↵Guennadi Liakhovetski1-12/+20
callbacks When adding and removing a client, the mx1-camera driver only activates and deactivates its camera interface respectively, which doesn't include any client-specific actions. Move this functionality into .clock_start() and .clock_stop() callbacks. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-06-21[media] mx2-camera: move interface activation and deactivation to clock ↵Guennadi Liakhovetski1-10/+18
callbacks When adding and removing a client, the mx2-camera driver only activates and deactivates its camera interface respectively, which doesn't include any client-specific actions. Move this functionality into .clock_start() and .clock_stop() callbacks. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-06-21[media] mx3-camera: move interface activation and deactivation to clock ↵Guennadi Liakhovetski1-14/+21
callbacks When adding and removing a client, the mx3-camera driver only activates and deactivates its camera interface respectively, which doesn't include any client-specific actions. Move this functionality into .clock_start() and .clock_stop() callbacks. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-06-21[media] atmel-isi: move interface activation and deactivation to clock callbacksGuennadi Liakhovetski1-9/+19
When adding and removing a client, the atmel-isi camera host driver only activates and deactivates its camera interface respectively, which doesn't include any client-specific actions. Move this functionality into .clock_start() and .clock_stop() callbacks. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-06-21[media] omap1-camera: move interface activation and deactivation to clock ↵Guennadi Liakhovetski1-9/+18
callbacks When adding and removing a client, the omap1-camera driver only activates and deactivates its camera interface respectively, which doesn't include any client-specific actions. Move this functionality into .clock_start() and .clock_stop() callbacks. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-06-21[media] pxa-camera: move interface activation and deactivation to clock ↵Guennadi Liakhovetski1-10/+18
callbacks When adding and removing a client, the pxa-camera driver only activates and deactivates its camera interface respectively, which doesn't include any client-specific actions. Move this functionality into .clock_start() and .clock_stop() callbacks. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-06-21[media] soc-camera: add host clock callbacks to start and stop the master clockGuennadi Liakhovetski1-2/+17
Currently soc-camera uses a single camera host callback to activate the interface master clock and to configure the interface for a specific client. However, during probing we might not have the information about a client, we just need to activate the clock. Add new camera host driver callbacks to only start and stop the clock without and client-specific configuration. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-06-21[media] soc-camera: move common code to soc_camera.cGuennadi Liakhovetski8-87/+48
All soc-camera host drivers include a pointer to an soc-camera device in their host private struct to check, that only one client is connected. Move this common code to soc_camera.c. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-06-21[media] V4L2: soc-camera: remove unneeded include pathGuennadi Liakhovetski1-2/+0
soc-camera isn't sufficiently broken to include any files from the drivers/media/i2c/soc_camera directory in its core or host driver files:-) Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-06-21[media] media: Cocci spatch "ptr_ret.spatch"Thomas Meyer1-4/+1
Use the PTR_RET() macro to simplify error processing. Signed-off-by: Thomas Meyer <thomas@m3y3r.de> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-06-21[media] soc_camera_platform: Remove redundant platform_set_drvdata()Sachin Kamat1-11/+1
Commit 0998d06310 (device-core: Ensure drvdata = NULL when no driver is bound) removes the need to set driver data field to NULL. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> [g.liakhovetski@gmx.de: further simplified return statement] Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-06-21[media] soc_camera/sh_mobile_csi2: Remove redundant platform_set_drvdata()Sachin Kamat1-7/+1
Commit 0998d06310 (device-core: Ensure drvdata = NULL when no driver is bound) removes the need to set driver data field to NULL. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-06-21[media] soc-camera: remove two unused configsPaul Bolle1-8/+0
The last users of Kconfig symbols MX3_VIDEO and VIDEO_MX2_HOSTSUPPORT were removed in v3.2. Their Kconfig entries can be removed now. Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-06-21[media] media: davinci: vpif_display: remove unnecessary loop for IRQ resourceLad, Prabhakar1-10/+8
For vpif display driver each IRQ resource contains a single IRQ so drop the second loop. Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-06-21[media] media: davinci: vpif_display: Convert to devm_* apiLad, Prabhakar1-25/+10
use devm_request_irq() instead of request_irq(). This ensures more consistent error values and simplifies error paths. Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-06-21[media] media: davinci: vpif_display: use module_platform_driver()Lad, Prabhakar1-17/+1
This patch uses module_platform_driver() to simplify the code. Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-06-21[media] media: davinci: vpif_display: move the freeing of irq and global ↵Lad, Prabhakar1-18/+12
variables to remove() Ideally the freeing of irq's and the global variables needs to be done in the remove() rather than module_exit(), this patch moves the freeing up of irq's and freeing the memory allocated to channel objects to remove() callback of struct platform_driver. Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-06-21[media] media: davinci: vpif_capture: remove unnecessary loop for IRQ resourceLad, Prabhakar1-10/+7
For vpif capture driver each IRQ resource contains a single IRQ so drop the second loop. Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-06-21[media] media: davinci: vpif_capture: Convert to devm_* apiLad, Prabhakar1-24/+12
use devm_request_irq() instead of request_irq(). This ensures more consistent error values and simplifies error paths. Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-06-21[media] media: davinci: vpif_capture: use module_platform_driver()Lad, Prabhakar1-27/+1
This patch uses module_platform_driver() to simplify the code. Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-06-21[media] media: davinci: vpif_capture: move the freeing of irq and global ↵Lad, Prabhakar1-18/+11
variables to remove() Ideally the freeing of irq's and the global variables needs to be done in the remove() rather than module_exit(), this patch moves the freeing up of irq's and freeing the memory allocated to channel objects to remove() callback of struct platform_driver. Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-06-21[media] media: davinci: vpif: remove unnecessary braces around definesLad, Prabhakar1-4/+4
This patch removes unnecessary braces around defines. Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-06-21[media] media: davinci: vpif: Convert to devm_* apiLad, Prabhakar1-23/+4
Use devm_ioremap_resource instead of reques_mem_region()/ioremap(). This ensures more consistent error values and simplifies error paths. Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-06-21[media] media: davinci: vpif: remove unwanted header mach/hardware.h and ↵Lad, Prabhakar1-6/+4
sort the includes alphabetically This patch removes unwanted header include of mach/hardware.h and along side sorts the header inclusion alphabetically. Signed-off-by: Lad, Prabhakar <prabhakar.csengg@gmail.com> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-06-21[media] omap24xxcam: add v4l2_device and replace parent with v4l2_devHans Verkuil2-1/+11
This driver did not yet support struct v4l2_device, so add it. This make it possible to replace the deprecated parent field with the v4l2_dev field, allowing the eventual removal of the parent field. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Sakari Ailus <sakari.ailus@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-06-21[media] soc_camera: replace vdev->parent by vdev->v4l2_devHans Verkuil1-2/+3
The parent field will eventually disappear to be replaced by v4l2_dev. soc_camera does provide a v4l2_device struct but did not point to it in struct video_device. This is now fixed. Now the video nodes can be found under the correct platform bus, and the advanced debug ioctls work correctly as well (the core implementation of those ioctls requires that v4l2_dev is set correctly). Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2013-06-20[media] s5p makefiles: don't override other selections on obj-[ym]Mauro Carvalho Chehab2-2/+2
The $obj-m/$obj-y vars should be adding new modules to build, not overriding it. So, it should never use $obj-y := foo.o instead, it should use: $obj-y += foo.o Failing to do that is very bad, as it will suppress needed modules. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-10-01 11:51:23 +0300