summaryrefslogtreecommitdiff
path: root/drivers/media/platform
AgeCommit message (Collapse)AuthorFilesLines
2023-11-28media: qcom: camss: Fix csid-gen2 for test pattern generatorAndrey Konovalov1-6/+3
commit 87889f1b7ea40d2544b49c62092e6ef2792dced7 upstream. In the current driver csid Test Pattern Generator (TPG) doesn't work. This change: - fixes writing frame width and height values into CSID_TPG_DT_n_CFG_0 - fixes the shift by one between test_pattern control value and the actual pattern. - drops fixed VC of 0x0a which testing showed prohibited some test patterns in the CSID to produce output. So that TPG starts working, but with the below limitations: - only test_pattern=9 works as it should - test_pattern=8 and test_pattern=7 produce black frame (all zeroes) - the rest of test_pattern's don't work (yavta doesn't get the data) - regardless of the CFA pattern set by 'media-ctl -V' the actual pixel order is always the same (RGGB for any RAW8 or RAW10P format in 4608x2592 resolution). Tested with: RAW10P format, VC0: media-ctl -V '"msm_csid0":0[fmt:SRGGB10/4608x2592 field:none]' media-ctl -V '"msm_vfe0_rdi0":0[fmt:SRGGB10/4608x2592 field:none]' media-ctl -l '"msm_csid0":1->"msm_vfe0_rdi0":0[1]' v4l2-ctl -d /dev/v4l-subdev6 -c test_pattern=9 yavta -B capture-mplane --capture=3 -n 3 -f SRGGB10P -s 4608x2592 /dev/video0 RAW10P format, VC1: media-ctl -V '"msm_csid0":2[fmt:SRGGB10/4608x2592 field:none]' media-ctl -V '"msm_vfe0_rdi1":0[fmt:SRGGB10/4608x2592 field:none]' media-ctl -l '"msm_csid0":2->"msm_vfe0_rdi1":0[1]' v4l2-ctl -d /dev/v4l-subdev6 -c test_pattern=9 yavta -B capture-mplane --capture=3 -n 3 -f SRGGB10P -s 4608x2592 /dev/video1 RAW8 format, VC0: media-ctl --reset media-ctl -V '"msm_csid0":0[fmt:SRGGB8/4608x2592 field:none]' media-ctl -V '"msm_vfe0_rdi0":0[fmt:SRGGB8/4608x2592 field:none]' media-ctl -l '"msm_csid0":1->"msm_vfe0_rdi0":0[1]' yavta -B capture-mplane --capture=3 -n 3 -f SRGGB8 -s 4608x2592 /dev/video0 Fixes: eebe6d00e9bf ("media: camss: Add support for CSID hardware version Titan 170") Cc: stable@vger.kernel.org Signed-off-by: Andrey Konovalov <andrey.konovalov@linaro.org> Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-11-28media: qcom: camss: Fix invalid clock enable bit disjunctionBryan O'Donoghue1-1/+1
commit d8f7e1a60d01739a1d78db2b08603089c6cf7c8e upstream. define CSIPHY_3PH_CMN_CSI_COMMON_CTRL5_CLK_ENABLE BIT(7) disjunction for gen2 ? BIT(7) : is a nop we are setting the same bit either way. Fixes: 4abb21309fda ("media: camss: csiphy: Move to hardcode CSI Clock Lane number") Cc: stable@vger.kernel.org Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-11-28media: qcom: camss: Fix set CSI2_RX_CFG1_VC_MODE when VC is greater than 3Bryan O'Donoghue1-0/+2
commit e655d1ae9703286cef7fda8675cad62f649dc183 upstream. VC_MODE = 0 implies a two bit VC address. VC_MODE = 1 is required for VCs with a larger address than two bits. Fixes: eebe6d00e9bf ("media: camss: Add support for CSID hardware version Titan 170") Cc: stable@vger.kernel.org Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-11-28media: qcom: camss: Fix missing vfe_lite clocks checkBryan O'Donoghue1-1/+2
commit b6e1bdca463a932c1ac02caa7d3e14bf39288e0c upstream. check_clock doesn't account for vfe_lite which means that vfe_lite will never get validated by this routine. Add the clock name to the expected set to remediate. Fixes: 7319cdf189bb ("media: camss: Add support for VFE hardware version Titan 170") Cc: stable@vger.kernel.org Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-11-28media: qcom: camss: Fix VFE-480 vfe_disable_output()Bryan O'Donoghue1-19/+3
commit 7f24d291350426d40b36dfbe6b3090617cdfd37a upstream. vfe-480 is copied from vfe-17x and has the same racy idle timeout bug as in 17x. Fix the vfe_disable_output() logic to no longer be racy and to conform to the 17x way of quiescing and then resetting the VFE. Fixes: 4edc8eae715c ("media: camss: Add initial support for VFE hardware version Titan 480") Cc: stable@vger.kernel.org Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-11-28media: qcom: camss: Fix VFE-17x vfe_disable_output()Bryan O'Donoghue1-19/+3
commit 3143ad282fc08bf995ee73e32a9e40c527bf265d upstream. There are two problems with the current vfe_disable_output() routine. Firstly we rightly use a spinlock to protect output->gen2.active_num everywhere except for in the IDLE timeout path of vfe_disable_output(). Even if that is not racy "in practice" somehow it is by happenstance not by design. Secondly we do not get consistent behaviour from this routine. On sc8280xp 50% of the time I get "VFE idle timeout - resetting". In this case the subsequent capture will succeed. The other 50% of the time, we don't hit the idle timeout, never do the VFE reset and subsequent captures stall indefinitely. Rewrite the vfe_disable_output() routine to - Quiesce write masters with vfe_wm_stop() - Set active_num = 0 remembering to hold the spinlock when we do so followed by - Reset the VFE Testing on sc8280xp and sdm845 shows this to be a valid fix. Fixes: 7319cdf189bb ("media: camss: Add support for VFE hardware version Titan 170") Cc: stable@vger.kernel.org Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-11-28media: qcom: camss: Fix vfe_get() error jumpBryan O'Donoghue1-1/+1
commit 26bda3da00c3edef727a6acb00ed2eb4b22f8723 upstream. Right now it is possible to do a vfe_get() with the internal reference count at 1. If vfe_check_clock_rates() returns non-zero then we will leave the reference count as-is and run: - pm_runtime_put_sync() - vfe->ops->pm_domain_off() skip: - camss_disable_clocks() Subsequent vfe_put() calls will when the ref-count is non-zero unconditionally run: - pm_runtime_put_sync() - vfe->ops->pm_domain_off() - camss_disable_clocks() vfe_get() should not attempt to roll-back on error when the ref-count is non-zero as the upper layers will still do their own vfe_put() operations. vfe_put() will drop the reference count and do the necessary power domain release, the cleanup jumps in vfe_get() should only be run when the ref-count is zero. [ 50.095796] CPU: 7 PID: 3075 Comm: cam Not tainted 6.3.2+ #80 [ 50.095798] Hardware name: LENOVO 21BXCTO1WW/21BXCTO1WW, BIOS N3HET82W (1.54 ) 05/26/2023 [ 50.095799] pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 50.095802] pc : refcount_warn_saturate+0xf4/0x148 [ 50.095804] lr : refcount_warn_saturate+0xf4/0x148 [ 50.095805] sp : ffff80000c7cb8b0 [ 50.095806] x29: ffff80000c7cb8b0 x28: ffff16ecc0e3fc10 x27: 0000000000000000 [ 50.095810] x26: 0000000000000000 x25: 0000000000020802 x24: 0000000000000000 [ 50.095813] x23: ffff16ecc7360640 x22: 00000000ffffffff x21: 0000000000000005 [ 50.095815] x20: ffff16ed175f4400 x19: ffffb4d9852942a8 x18: ffffffffffffffff [ 50.095818] x17: ffffb4d9852d4a48 x16: ffffb4d983da5db8 x15: ffff80000c7cb320 [ 50.095821] x14: 0000000000000001 x13: 2e656572662d7265 x12: 7466612d65737520 [ 50.095823] x11: 00000000ffffefff x10: ffffb4d9850cebf0 x9 : ffffb4d9835cf954 [ 50.095826] x8 : 0000000000017fe8 x7 : c0000000ffffefff x6 : 0000000000057fa8 [ 50.095829] x5 : ffff16f813fe3d08 x4 : 0000000000000000 x3 : ffff621e8f4d2000 [ 50.095832] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff16ed32119040 [ 50.095835] Call trace: [ 50.095836] refcount_warn_saturate+0xf4/0x148 [ 50.095838] device_link_put_kref+0x84/0xc8 [ 50.095843] device_link_del+0x38/0x58 [ 50.095846] vfe_pm_domain_off+0x3c/0x50 [qcom_camss] [ 50.095860] vfe_put+0x114/0x140 [qcom_camss] [ 50.095869] csid_set_power+0x2c8/0x408 [qcom_camss] [ 50.095878] pipeline_pm_power_one+0x164/0x170 [videodev] [ 50.095896] pipeline_pm_power+0xc4/0x110 [videodev] [ 50.095909] v4l2_pipeline_pm_use+0x5c/0xa0 [videodev] [ 50.095923] v4l2_pipeline_pm_get+0x1c/0x30 [videodev] [ 50.095937] video_open+0x7c/0x100 [qcom_camss] [ 50.095945] v4l2_open+0x84/0x130 [videodev] [ 50.095960] chrdev_open+0xc8/0x250 [ 50.095964] do_dentry_open+0x1bc/0x498 [ 50.095966] vfs_open+0x34/0x40 [ 50.095968] path_openat+0xb44/0xf20 [ 50.095971] do_filp_open+0xa4/0x160 [ 50.095974] do_sys_openat2+0xc8/0x188 [ 50.095975] __arm64_sys_openat+0x6c/0xb8 [ 50.095977] invoke_syscall+0x50/0x128 [ 50.095982] el0_svc_common.constprop.0+0x4c/0x100 [ 50.095985] do_el0_svc+0x40/0xa8 [ 50.095988] el0_svc+0x2c/0x88 [ 50.095991] el0t_64_sync_handler+0xf4/0x120 [ 50.095994] el0t_64_sync+0x190/0x198 [ 50.095996] ---[ end trace 0000000000000000 ]--- Fixes: 779096916dae ("media: camss: vfe: Fix runtime PM imbalance on error") Cc: stable@vger.kernel.org Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-11-28media: qcom: camss: Fix pm_domain_on sequence in probeBryan O'Donoghue1-6/+6
commit 7405116519ad70b8c7340359bfac8db8279e7ce4 upstream. We need to make sure camss_configure_pd() happens before camss_register_entities() as the vfe_get() path relies on the pointer provided by camss_configure_pd(). Fix the ordering sequence in probe to ensure the pointers vfe_get() demands are present by the time camss_register_entities() runs. In order to facilitate backporting to stable kernels I've moved the configure_pd() call pretty early on the probe() function so that irrespective of the existence of the old error handling jump labels this patch should still apply to -next circa Aug 2023 to v5.13 inclusive. Fixes: 2f6f8af67203 ("media: camss: Refactor VFE power domain toggling") Cc: stable@vger.kernel.org Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-11-28media: venus: hfi: add checks to handle capabilities from firmwareVikash Garodia1-0/+12
commit 8d0b89398b7ebc52103e055bf36b60b045f5258f upstream. The hfi parser, parses the capabilities received from venus firmware and copies them to core capabilities. Consider below api, for example, fill_caps - In this api, caps in core structure gets updated with the number of capabilities received in firmware data payload. If the same api is called multiple times, there is a possibility of copying beyond the max allocated size in core caps. Similar possibilities in fill_raw_fmts and fill_profile_level functions. Cc: stable@vger.kernel.org Fixes: 1a73374a04e5 ("media: venus: hfi_parser: add common capability parser") Signed-off-by: Vikash Garodia <quic_vgarodia@quicinc.com> Signed-off-by: Stanimir Varbanov <stanimir.k.varbanov@gmail.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-11-28media: venus: hfi: fix the check to handle session buffer requirementVikash Garodia1-1/+1
commit b18e36dfd6c935da60a971310374f3dfec3c82e1 upstream. Buffer requirement, for different buffer type, comes from video firmware. While copying these requirements, there is an OOB possibility when the payload from firmware is more than expected size. Fix the check to avoid the OOB possibility. Cc: stable@vger.kernel.org Fixes: 09c2845e8fe4 ("[media] media: venus: hfi: add Host Firmware Interface (HFI)") Reviewed-by: Nathan Hebert <nhebert@chromium.org> Signed-off-by: Vikash Garodia <quic_vgarodia@quicinc.com> Signed-off-by: Stanimir Varbanov <stanimir.k.varbanov@gmail.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-11-28media: venus: hfi_parser: Add check to keep the number of codecs within rangeVikash Garodia1-0/+3
commit 0768a9dd809ef52440b5df7dce5a1c1c7e97abbd upstream. Supported codec bitmask is populated from the payload from venus firmware. There is a possible case when all the bits in the codec bitmask is set. In such case, core cap for decoder is filled and MAX_CODEC_NUM is utilized. Now while filling the caps for encoder, it can lead to access the caps array beyong 32 index. Hence leading to OOB write. The fix counts the supported encoder and decoder. If the count is more than max, then it skips accessing the caps. Cc: stable@vger.kernel.org Fixes: 1a73374a04e5 ("media: venus: hfi_parser: add common capability parser") Signed-off-by: Vikash Garodia <quic_vgarodia@quicinc.com> Signed-off-by: Stanimir Varbanov <stanimir.k.varbanov@gmail.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-11-28media: venus: hfi: add checks to perform sanity on queue pointersVikash Garodia1-0/+10
commit 5e538fce33589da6d7cb2de1445b84d3a8a692f7 upstream. Read and write pointers are used to track the packet index in the memory shared between video driver and firmware. There is a possibility of OOB access if the read or write pointer goes beyond the queue memory size. Add checks for the read and write pointer to avoid OOB access. Cc: stable@vger.kernel.org Fixes: d96d3f30c0f2 ("[media] media: venus: hfi: add Venus HFI files") Signed-off-by: Vikash Garodia <quic_vgarodia@quicinc.com> Signed-off-by: Stanimir Varbanov <stanimir.k.varbanov@gmail.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2023-11-20media: platform: mtk-mdp3: fix uninitialized variable in mdp_path_config()Moudy Ho1-1/+1
[ Upstream commit 2a76e7679b594ea3e1b3b7fb6c3d67158114020d ] Fix the build warnings that were detected by the linux-media build scripts tool: drivers/media/platform/mediatek/mdp3/mtk-mdp3-cmdq.c: In function 'mdp_path_config.isra': drivers/media/platform/mediatek/mdp3/mtk-mdp3-cmdq.c: warning: 'ctx' may be used uninitialized [-Wmaybe-uninitialized] | out = CFG_COMP(MT8195, ctx->param, outputs[0]); | ~~~^~~~~~~ drivers/media/platform/mediatek/mdp3/mtk-img-ipi.h: note: in definition of macro 'CFG_COMP' | (IS_ERR_OR_NULL(comp) ? 0 : _CFG_COMP(plat, comp, mem)) | ^~~~ drivers/media/platform/mediatek/mdp3/mtk-mdp3-cmdq.c: note: 'ctx' was declared here | struct mdp_comp_ctx *ctx; | Fixes: 61890ccaefaf ("media: platform: mtk-mdp3: add MediaTek MDP3 driver") Signed-off-by: Moudy Ho <moudy.ho@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-11-20media: mediatek: vcodec: using encoder device to alloc/free encoder memoryYunfei Dong1-16/+40
[ Upstream commit 56c0ac05a31a0bf525fddc300ea997356ad8146f ] Need to use encoder device to allocate/free encoder memory when calling mtk_vcodec_mem_alloc/mtk_vcodec_mem_free, or leading to below crash log when test encoder with decoder device. pc : dma_alloc_attrs+0x44/0xf4 lr : mtk_vcodec_mem_alloc+0x50/0xa4 [mtk_vcodec_common] sp : ffffffc0209f3990 x29: ffffffc0209f39a0 x28: ffffff8024102a18 x27: 0000000000000000 x26: 0000000000000000 x25: ffffffc00c06e2d8 x24: 0000000000000001 x23: 0000000000000cc0 x22: 0000000000000010 x21: 0000000000000800 x20: ffffff8024102a18 x19: 0000000000000000 x18: 0000000000000000 x17: 0000000000000009 x16: ffffffe389736a98 x15: 0000000000000078 x14: ffffffe389704434 x13: 0000000000000007 x12: ffffffe38a2b2560 x11: 0000000000000800 x10: 0000000000000004 x9 : ffffffe331f07484 x8 : 5400e9aef2395000 x7 : 0000000000000000 x6 : 000000000000003f x5 : 0000000000000001 x4 : 0000000000000000 x3 : 0000000000000cc0 x2 : ffffff8024102a18 x1 : 0000000000000800 x0 : 0000000000000010 Call trace: dma_alloc_attrs+0x44/0xf4 mtk_vcodec_mem_alloc+0x50/0xa4 [mtk_vcodec_common 2819d3d601f3cd06c1f2213ac1b9995134441421] h264_enc_set_param+0x27c/0x378 [mtk_vcodec_enc 772cc3d26c254e8cf54079451ef8d930d2eb4404] venc_if_set_param+0x4c/0x7c [mtk_vcodec_enc 772cc3d26c254e8cf54079451ef8d930d2eb4404] vb2ops_venc_start_streaming+0x1bc/0x328 [mtk_vcodec_enc 772cc3d26c254e8cf54079451ef8d930d2eb4404] vb2_start_streaming+0x64/0x12c vb2_core_streamon+0x114/0x158 vb2_streamon+0x38/0x60 v4l2_m2m_streamon+0x48/0x88 v4l2_m2m_ioctl_streamon+0x20/0x2c v4l_streamon+0x2c/0x38 __video_do_ioctl+0x2c4/0x3dc video_usercopy+0x404/0x934 video_ioctl2+0x20/0x2c v4l2_ioctl+0x54/0x64 v4l2_compat_ioctl32+0x90/0xa34 __arm64_compat_sys_ioctl+0x128/0x13c invoke_syscall+0x4c/0x108 el0_svc_common+0x98/0x104 do_el0_svc_compat+0x28/0x34 el0_svc_compat+0x2c/0x74 el0t_32_sync_handler+0xa8/0xcc el0t_32_sync+0x194/0x198 Code: aa0003f6 aa0203f4 aa0103f5 f900 'Fixes: 01abf5fbb081c ("media: mediatek: vcodec: separate struct 'mtk_vcodec_ctx'")' Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-11-20media: imx-jpeg: notify source chagne event when the first picture parsedMing Qian2-1/+7
[ Upstream commit b833b178498dafa2156cfb6f4d3ce4581c21f1e5 ] After gstreamer rework the dynamic resolution change handling, gstreamer stop doing capture buffer allocation based on guesses and wait for the source change event when available. It requires driver always notify source change event in the initialization, even if the size parsed is equal to the size set on capture queue. otherwise, the pipeline will be stalled. Currently driver may not notify source change event if the parsed format and size are equal to those previously established, but it may stall the gstreamer pipeline. The link of gstreamer patch is https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4437 Fixes: b4e1fb8643da ("media: imx-jpeg: Support dynamic resolution change") Signed-off-by: Ming Qian <ming.qian@nxp.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-11-20media: mediatek: vcodec: Handle invalid encoder vsiIrui Wang1-0/+5
[ Upstream commit 19e2e01f30b5d2b448b5db097130486ea95af36f ] Handle invalid encoder vsi in vpu_enc_init to ensure the encoder vsi is valid for future use. Fixes: 1972e32431ed ("media: mediatek: vcodec: Fix possible invalid memory access for encoder") Signed-off-by: Irui Wang <irui.wang@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-11-20media: verisilicon: Fixes clock list for rk3588 av1 decoderBenjamin Gaignard1-1/+1
[ Upstream commit 39377f84fb98561b86b645f0b7c33512eba7afaf ] Mainlined RK3588 clock driver manage by itself the dependency between aclk/hclk and their root clocks (aclk_vdpu_root/hclk_vdpu_root). RK3588 av1 video decoder do not have to take care of it anymore so remove them from the list and be compliant with yaml bindings description. Fixes: 003afda97c65 ("media: verisilicon: Enable AV1 decoder on rk3588") Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-11-20media: cadence: csi2rx: Unregister v4l2 async notifierPratyush Yadav1-1/+6
[ Upstream commit b2701715301a49b53d05c7d43f3fedc3b8743bfc ] The notifier is added to the global notifier list when registered. When the module is removed, the struct csi2rx_priv in which the notifier is embedded, is destroyed. As a result the notifier list has a reference to a notifier that no longer exists. This causes invalid memory accesses when the list is iterated over. Similar for when the probe fails. Unregister and clean up the notifier to avoid this. Fixes: 1fc3b37f34f6 ("media: v4l: cadence: Add Cadence MIPI-CSI2 RX driver") Signed-off-by: Pratyush Yadav <p.yadav@ti.com> Tested-by: Julien Massot <julien.massot@collabora.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by: Maxime Ripard <mripard@kernel.org> Signed-off-by: Jai Luthra <j-luthra@ti.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-11-20media: s3c-camif: Avoid inappropriate kfree()Katya Orlova1-4/+2
[ Upstream commit 61334819aca018c3416ee6c330a08a49c1524fc3 ] s3c_camif_register_video_node() works with video_device structure stored as a field of camif_vp, so it should not be kfreed. But there is video_device_release() on error path that do it. Found by Linux Verification Center (linuxtesting.org) with SVACE. Fixes: babde1c243b2 ("[media] V4L: Add driver for S3C24XX/S3C64XX SoC series camera interface") Signed-off-by: Katya Orlova <e.orlova@ispras.ru> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-11-20media: mtk-jpegenc: Fix bug in JPEG encode quality selectionFei Shao1-2/+3
[ Upstream commit 0aeccc63f3bc4cfd49dc4893da1409402ee6b295 ] The driver uses the upper-bound approach to decide the target JPEG encode quality, but there's a logic bug that if the desired quality is higher than what the driver can support, the driver falls back to using the worst quality. Fix the bug by assuming using the best quality in the beginning, and with trivial refactor to avoid long lines. Fixes: 45f13a57d813 ("media: platform: Add jpeg enc feature") Signed-off-by: Fei Shao <fshao@chromium.org> Reviewed-by: Chen-Yu Tsai <wenst@chromium.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-11-20media: amphion: handle firmware debug messageMing Qian4-5/+29
[ Upstream commit 6496617b2b06d7004a5cbd53d48f19567d6b018c ] decoder firmware may notify host some debug message, it can help analyze the state of the firmware in case of error Fixes: 9f599f351e86 ("media: amphion: add vpu core driver") Signed-off-by: Ming Qian <ming.qian@nxp.com> Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-11-20media: verisilicon: Do not enable G2 postproc downscale if source is ↵Marek Vasut1-1/+1
narrower than destination [ Upstream commit 6e481d52d363218a3e6feb31694da74b38b30fad ] In case of encoded input VP9 data width that is not multiple of macroblock size, which is 16 (e.g. 1080x1920 frames, where 1080 is multiple of 8), the width is padded to be a multiple of macroblock size (for 1080x1920 frames, that is 1088x1920). The hantro_postproc_g2_enable() checks whether the encoded data width is equal to decoded frame width, and if not, enables down-scale mode. For a frame where input is 1080x1920 and output is 1088x1920, this is incorrect as no down-scale happens, the frame is only padded. Enabling the down-scale mode in this case results in corrupted frames. Fix this by adjusting the check to test whether encoded data width is greater than decoded frame width, and only in that case enable the down-scale mode. To generate input test data to trigger this bug, use e.g.: $ gst-launch-1.0 videotestsrc ! video/x-raw,width=272,height=256,format=I420 ! \ vp9enc ! matroskamux ! filesink location=/tmp/test.vp9 To trigger the bug upon decoding (note that the NV12 must be forced, as that assures the output data would pass the G2 postproc): $ gst-launch-1.0 filesrc location=/tmp/test.vp9 ! matroskademux ! vp9parse ! \ v4l2slvp9dec ! video/x-raw,format=NV12 ! videoconvert ! fbdevsink Fixes: 79c987de8b35 ("media: hantro: Use post processor scaling capacities") Signed-off-by: Marek Vasut <marex@denx.de> Reviewed-by: Benjamin Gaignard <benjamin.gaignard@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-11-20media: hantro: Check whether reset op is defined before useMarek Vasut1-1/+2
[ Upstream commit 88d4b23a629ebd34f682f770cb6c2116c851f7b8 ] The i.MX8MM/N/P does not define the .reset op since reset of the VPU is done by genpd. Check whether the .reset op is defined before calling it to avoid NULL pointer dereference. Note that the Fixes tag is set to the commit which removed the reset op from i.MX8M Hantro G2 implementation, this is because before this commit all the implementations did define the .reset op. Fixes: 6971efb70ac3 ("media: hantro: Allow i.MX8MQ G1 and G2 to run independently") Signed-off-by: Marek Vasut <marex@denx.de> Reviewed-by: Chen-Yu Tsai <wenst@chromium.org> Tested-by: Chen-Yu Tsai <wenst@chromium.org> Reviewed-by: Adam Ford <aford173@gmail.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-11-20media: imx-jpeg: initiate a drain of the capture queue in dynamic resolution ↵Ming Qian1-3/+24
change [ Upstream commit 1c2786632e20c8f0fd4004fae3b3490276e5e5da ] The last buffer from before the change must be marked, with the V4L2_BUF_FLAG_LAST flag, similarly to the Drain sequence above. Meanwhile if V4L2_DEC_CMD_STOP is sent before the source change triggered, we need to restore the is_draing flag after the draining in dynamic resolution change. Fixes: b4e1fb8643da ("media: imx-jpeg: Support dynamic resolution change") Signed-off-by: Ming Qian <ming.qian@nxp.com> Reviewed-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-10-11media: xilinx-vipp: Look for entities also in waiting_listSakari Ailus1-5/+12
The big V4L2 async framework overhaul simplified linked lists used by the V4L2 async framework. This affected a few drivers and it turns out a few of those drivers rely on searching for entities in both async notifier's waiting and done lists. Do that by separately traversing both. Fixes: 9bf19fbf0c8b ("media: v4l: async: Rework internal lists") Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-10-05media: mediatek: vcodec: Fix encoder access NULL pointerIrui Wang1-1/+2
Need to set the private data with encoder device, or will access NULL pointer in encoder handler. Fixes: 1972e32431ed ("media: mediatek: vcodec: Fix possible invalid memory access for encoder") Signed-off-by: Irui Wang <irui.wang@mediatek.com> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-10-02media: pxa_camera: Fix an error handling path in pxa_camera_probe()Christophe JAILLET1-1/+1
The commit in Fixes has reordered the code and the error handling path. However one 'goto' was missed. Fix it and branch at the correct place in the error handling path. Fixes: 5073d10cbaba ("media: pxa_camera: Register V4L2 device early") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-09-19media: imx-mipi-csis: Remove an incorrect fwnode_handle_put() callChristophe JAILLET1-2/+0
The commit in Fixes has removed an fwnode_graph_get_endpoint_by_id() call in mipi_csis_subdev_init(). So the reference that was taken should not be released anymore in the error handling path of the probe and in the remove function. Remove the now incorrect fwnode_handle_put() calls. Fixes: 1029939b3782 ("media: v4l: async: Simplify async sub-device fwnode matching") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Rui Miguel Silva <rmfrfs@gmail.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-09-14media: via: Use correct dependency for camera sensor driversSakari Ailus1-1/+1
The via camera controller driver selected ov7670 driver, however now that driver has dependencies and may no longer be selected unconditionally. Reported-by: Randy Dunlap <rdunlap@infradead.org> Fixes: 7d3c7d2a2914 ("media: i2c: Add a camera sensor top level menu") Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> Tested-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-09-14media: v4l: Use correct dependency for camera sensor driversSakari Ailus1-2/+2
The Kconfig option that enables compiling camera sensor drivers is VIDEO_CAMERA_SENSOR rather than MEDIA_CAMERA_SUPPORT as it was previously. Fix this. Also select VIDEO_OV7670 for marvell platform drivers only if MEDIA_SUBDRV_AUTOSELECT and VIDEO_CAMERA_SENSOR are enabled. Reported-by: Randy Dunlap <rdunlap@infradead.org> Fixes: 7d3c7d2a2914 ("media: i2c: Add a camera sensor top level menu") Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-09-01Merge tag 'media/v6.6-1' of ↵Linus Torvalds178-3155/+4946
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media updates from Mauro Carvalho Chehab: - new i2c drivers: ds90ub913, ds90ub953, ds90ub960, dw9719, ds90ub913 - new Intel IVSC MEI drivers - some Mediatek platform drivers were moved to a common location - Intel atomisp2 driver is now working with the main ov2680 driver. Due to that, the atomisp2 ov2680 staging one was removed - the bttv driver was finally converted to videobuf2 framework. This was the last one upstream using videobuf version 1 core. We'll likely remove the old videobuf framework on 6.7 - lots of improvements at atomisp driver: it now works with normal I2C sensors. Several compile-mode dependecies to select between ISP2400 and ISP2401 are now solved in runtime - a new ipu-bridge logic was added to work with IVSC MEI drivers - venus driver gained better support for new VPU versions - the v4l core async framework has gained lots of improvements and cleanups - lots of other cleanups, improvements and driver fixes * tag 'media/v6.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (358 commits) media: ivsc: Add ACPI dependency media: bttv: convert to vb2 media: bttv: use audio defaults for winfast2000 media: bttv: refactor bttv_set_dma() media: bttv: move vbi_skip/vbi_count out of buffer media: bttv: remove crop info from bttv_buffer media: bttv: remove tvnorm field from bttv_buffer media: bttv: remove format field from bttv_buffer media: bttv: move do_crop flag out of bttv_fh media: bttv: copy vbi_fmt from bttv_fh media: bttv: copy vid fmt/width/height from fh media: bttv: radio use v4l2_fh instead of bttv_fh media: bttv: replace BUG with WARN_ON media: bttv: use video_drvdata to get bttv media: i2c: rdacm21: Fix uninitialized value media: coda: Remove duplicated include media: vivid: fix the racy dev->radio_tx_rds_owner media: i2c: ccs: Check rules is non-NULL media: i2c: ds90ub960: Fix PLL config for 1200 MHz CSI rate media: i2c: ds90ub953: Fix use of uninitialized variables ...
2023-08-25Merge tag 'media/v6.5-4' of ↵Linus Torvalds1-0/+2
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media fix from Mauro Carvalho Chehab: "Fix a potential array out-of-bounds in the mediatek vcodec driver" * tag 'media/v6.5-4' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: media: vcodec: Fix potential array out-of-bounds in encoder queue_setup
2023-08-23media: vcodec: Fix potential array out-of-bounds in encoder queue_setupWei Chen1-0/+2
variable *nplanes is provided by user via system call argument. The possible value of q_data->fmt->num_planes is 1-3, while the value of *nplanes can be 1-8. The array access by index i can cause array out-of-bounds. Fix this bug by checking *nplanes against the array size. Fixes: 4e855a6efa54 ("[media] vcodec: mediatek: Add Mediatek V4L2 Video Encoder Driver") Signed-off-by: Wei Chen <harperchen1110@gmail.com> Cc: stable@vger.kernel.org Reviewed-by: Chen-Yu Tsai <wenst@chromium.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-08-19Merge tag 'media/v6.5-3' of ↵Linus Torvalds2-4/+7
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media fixes from Mauro Carvalho Chehab: "Three driver fixes" * tag 'media/v6.5-3' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: media: imx: imx7-media-csi: Fix applying format constraints media: uvcvideo: Fix menu count handling for userspace XU mappings media: mtk-jpeg: Set platform driver data earlier
2023-08-14media: coda: Remove duplicated includeGUO Zihua1-1/+0
Remove duplicated include of linux/of.h. Resolves checkincludes message. Signed-off-by: GUO Zihua <guozihua@huawei.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-08-14media: platform: ti: fix the return value handle for platform_get_irq()Ruan Jinjie2-6/+2
There is no possible for platform_get_irq() to return 0, and the return value of platform_get_irq() is more sensible to show the error reason. Signed-off-by: Ruan Jinjie <ruanjinjie@huawei.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-08-14media: verisilicon: Do not check for 0 return after calling platform_get_irq()Ruan Jinjie1-2/+2
It is not possible for platform_get_irq() or platform_get_irq_byname() to return 0. Use the return value from platform_get_irq() or platform_get_irq_byname(). Signed-off-by: Ruan Jinjie <ruanjinjie@huawei.com> Reviewed-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-08-14media: camif-core: Do not check for 0 return after calling platform_get_irq()Ruan Jinjie1-2/+2
It is not possible for platform_get_irq() to return 0. Use the return value from platform_get_irq(). Signed-off-by: Ruan Jinjie <ruanjinjie@huawei.com> Reviewed-by: Andrzej Pietrasiewicz <andrzej.p@collabora.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-08-14media: davinci: vpif_capture: fix error return code in vpif_probe()Yang Yingliang1-0/+1
Set error return code, when get platform data failed. Fixes: b4a4547371b9 ("media: davinci: Init async notifier after registering V4L2 device") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Reviewed-by: Lad Prabhakar <prabhakar.csengg@gmail.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-08-10media: rcar-csi2: Add support for C-PHY on R-Car V4HNiklas Söderlund1-0/+291
Add support for C-PHY on R-Car V4H. While the V4H supports both D-PHY and C-PHY this patch only adds support for the C-PHY mode due to lack of documentation and hardware to test on. The V4H is the first Gen4 device that is enabled in the rcar-csi2 driver. There is much overlap with the Gen3 driver, the primary difference is in how the receiver is started. The V4H have a much larger register space and some addresses overlap with Gen3. [Sakari Ailus: Use div_u64() to divide a 64-bit integer.] Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-08-10media: imx: imx7-media-csi: Fix frame sizes enumerationLaurent Pinchart1-6/+8
Enumeration of the minimum, maximum and step values for the image width does not take hardware constraints into account. Fix it. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Alexander Stein <alexander.stein@ew.tq-group.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-08-10media: nxp: imx8-isi: Add ISI support for i.MX93Guoniu.zhou3-0/+48
i.MX93 uses a different gasket which has different register definitions compared with i.MX8. Hence implement the gasket callbacks in order to add ISI support for i.MX93. Signed-off-by: Guoniu.zhou <guoniu.zhou@nxp.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-08-10media: nxp: imx8-isi: Move i.MX8 gasket configuration to an ops structureGuoniu.zhou5-36/+76
The i.MX93 includes an ISI instance compatible with the imx8-isi driver, but with a different gasket. To prepare for this, make the gasket configuration modular by moving the code to an ops structure. Signed-off-by: Guoniu.zhou <guoniu.zhou@nxp.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-08-10media: nxp: Fix wrong return pointer check in mxc_isi_crossbar_init()Yang Yingliang1-1/+1
It should check 'xbar->inputs', when allocate memory for it. Cc: stable@vger.kernel.org Fixes: cf21f328fcaf ("media: nxp: Add i.MX8 ISI driver") Signed-off-by: Yang Yingliang <yangyingliang@huawei.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-08-10media: nxp: Remove redundant dev_err()Ruan Jinjie2-2/+0
There is no need to call the dev_err() function directly to print a custom message when handling an error from platform_get_irq() function as it is going to display an appropriate error message in case of a failure. Signed-off-by: Ruan Jinjie <ruanjinjie@huawei.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-08-10media: rcar_jpu: Remove redundant dev_err()Ruan Jinjie1-3/+1
There is no need to call the dev_err() function directly to print a custom message when handling an error from platform_get_irq() function as it is going to display an appropriate error message in case of a failure. Signed-off-by: Ruan Jinjie <ruanjinjie@huawei.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-08-10media: jpeg-core: Remove redundant dev_err()Ruan Jinjie1-3/+1
There is no need to call the dev_err() function directly to print a custom message when handling an error from platform_get_irq() function as it is going to display an appropriate error message in case of a failure. Signed-off-by: Ruan Jinjie <ruanjinjie@huawei.com> Acked-by: Andrzej Pietrasiewicz <andrzejtp2010@gmail.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-08-10media: stm32: dcmi: only call s_stream on the source subdevAlain Volmat1-49/+14
Avoid calling s_stream on each subdev until reaching the sensor and instead call s_stream on the source subdev only (which will in turn do whatever needed to start the stream). Signed-off-by: Alain Volmat <alain.volmat@foss.st.com> Reviewed-by: Hugues FRUCHET <hugues.fruchet@foss.st.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-08-10media: venus: Fix firmware path for sm8250Patrick Whewell1-1/+1
The firmware path for the sm8250 resources is incorrect. This fixes the path to address the firmware correctly. Signed-off-by: Patrick Whewell <patrick.whewell@sightlineapplications.com> Signed-off-by: Stanimir Varbanov <stanimir.k.varbanov@gmail.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-08-10media: venus: firmware: Use of_reserved_mem_lookup()Stephan Gerhold1-11/+13
Reserved memory can be either looked up using the generic function of_address_to_resource() or using the special of_reserved_mem_lookup(). The latter has the advantage that it ensures that the referenced memory region was really reserved and is not e.g. status = "disabled". of_reserved_mem also supports allocating reserved memory dynamically at boot time. This works only when using of_reserved_mem_lookup() since there won't be a fixed address in the device tree. Switch the code to use of_reserved_mem_lookup(). There is no functional difference for static reserved memory allocations. Signed-off-by: Stephan Gerhold <stephan@gerhold.net> Signed-off-by: Stanimir Varbanov <stanimir.k.varbanov@gmail.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-30 16:26:12 +0300