| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Once the pipeline is set in the base code, create a callback that will adapt
the ISC pipeline to each product.
Create the adapt_pipeline callback that will be used in this fashion.
[hverkuil: made isc_sama5d2_adapt_pipeline static]
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
The list of input and output formats has to be product specific.
Move this list into the product specific code.
Have pointers to these arrays inside the device struct.
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
The RLP submodule is a part of the atmel-isc pipeline, and stands for
Rounding,Limiting and Packaging. It used to extract specific data from the
ISC pipeline. For example if we want to output greyscale 8 bit, we would
use limiting to 8 bits, and packaging to Luma component only.
Create a product specific callback for initializing the RLP submodule
of the pipeline
[hverkuil: made isc_sama5d2_config_rlp static]
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
The GAM submodule is a part of the atmel-isc pipeline, and stands for
Gamma Correction. It is used to apply the gamma curve to the incoming pixels.
Create a product specific callback for initializing the GAM submodule
of the pipeline.
For sama5d2 product, there is no special configuration at this moment,
thus this function is a noop.
[hverkuil: made isc_sama5d2_config_gam static]
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
The DPC submodule is a part of the atmel-isc pipeline, and stands for
Defective Pixel Correction. Its purpose is to detect defective pixels and
correct them if possible with the help of adjacent pixels.
Create a product specific callback for initializing the DPC submodule
of the pipeline.
For sama5d2 product, this module does not exist, thus this function is a noop.
[hverkuil: made isc_sama5d2_config_dpc static]
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Create product specific callback for initializing v4l2 controls.
Call this from v4l2 controls init function.
[hverkuil: made isc_sama5d2_config_ctrls static]
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
The CC submodule is a part of the atmel-isc pipeline, and stands for
Color Correction. It is used to apply gains and offsets to the
chroma (U, V) components of the YUV elements.
Implement the CC submodule initialization, as a product
specific function, which currently configures the neutral point in color
correction.
[hverkuil: made isc_sama5d2_config_cc static]
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Newer ISC pipelines have the additional modules of
Defective Pixel Correction -> DPC itself,
Defective Pixel Correction -> Green Disparity Correction (DPC_GDC)
Defective Pixel Correction -> Black Level Correction (DPC_BLC)
Vertical and Horizontal Scaler -> VHXS
Some products have this full pipeline (sama7g5), other products do not (sama5d2)
Add the modules to the isc base, and also extend the register range to include
the modules.
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Add register description for additional pipeline modules: the
Defective Pixel Correction (DPC) and the Vertical and Horizontal Scaler(VHXS)
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Add his_entry to the reg offsets struct.
This will allow different products to have a different reg offset for this
particular module.
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Add support for version register and print it at probe time.
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
The DMA submodule is a part of the atmel-isc pipeline, and stands for
Direct Memory Access. It acts like a master on the AXI bus of the SoC, and
can directly write the RAM area with the pixel data from the ISC internal
sram.
Add dma to the reg offsets struct.
This will allow different products to have a different reg offset for this
particular module.
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
The HIS submodule is a part of the atmel-isc pipeline, and stands for
Histogram. This module performs a color histogram that can be read and used
by the main processor.
Add his to the reg offsets struct.
This will allow different products to have a different reg offset for this
particular module.
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
The RLP submodule is a part of the atmel-isc pipeline, and stands for
Rounding,Limiting and Packaging. It used to extract specific data from the
ISC pipeline. For example if we want to output greyscale 8 bit, we would
use limiting to 8 bits, and packaging to Luma component only.
Add rlp to the reg offsets struct.
This will allow different products to have a different reg offset for this
particular module.
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
The SUB submodules are a part of the atmel-isc pipeline, and stand for
Subsampling. They are used to subsample the original YUV 4:4:4 pixel ratio
aspect to either 4:2:2 or 4:2:0.
Add sub420 and sub422 to the reg offsets struct.
This will allow different products to have a different reg offset for these
particular modules.
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
The CBC submodule is a part of the atmel-isc pipeline, and stands for
Contrast Brightness Control. It is used to apply gains and offsets to the
luma (Y) and chroma (U, V) components of the YUV elements.
Add cbc to the reg offsets struct. This will allow different products
to have a different reg offset for this particular module.
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
The CBC submodule is a part of the atmel-isc pipeline, and stands for
Contrast Brightness Control. It is used to apply gains and offsets to the
luma (Y) and chroma (U, V) components of the YUV elements.
The CBC submodule should be initialized in the product specific driver
as it's product specific. Other products can implement it differently
[hverkuil: made isc_sama5d2_config_cbc static]
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Create a struct that holds register offsets that are product specific.
Add initially the CSC register.
This allows each product that contains a variant of the ISC to add their
own register offset.
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Add the clock id to the debug message regarding clock setup
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
The CSC submodule is a part of the atmel-isc pipeline, and stands for
Color Space Conversion. It is used to apply a matrix transformation to
RGB pixels to convert them to the YUV components.
The CSC submodule should be initialized in the product specific driver
as it's product specific. Other products can implement it differently.
[hverkuil: made isc_sama5d2_config_csc static]
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
The dma configuration (DCFG) is specific to the product.
Move this configuration in the product specific driver, and add the
field inside the driver struct.
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Move the max width and max height constants to the product specific driver
and have them in the device struct.
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
When calling the subdev, certain subdev drivers will overwrite the
frame size and adding sizes which are beyond the ISC's capabilities.
Thus we need to ensure the frame size is cropped to the maximum caps.
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
The driver name constant must defined based on product driver, thus moving
the constant directly where it's required. This will allow each ISC based
product to define it's own name.
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Separate the gamma table from the isc base file into the specific sama5d2
product file.
Add a pointer to the gamma table and entries count inside the platform
driver specific struct.
[hverkuil: made isc_sama5d2_gamma_table static]
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
While there's nothing wrong with EN DASH on C code, this probably
came from some cut-and paste from an ITU-T table.
It sounds better to just an HYPHEN here.
Reviewed-by: Michael Tretter <m.tretter@pengutronix.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
change 'requerment' into 'requirement'
change 'quantanization' into 'quantization'
change 'qantization' into 'quantization'
Signed-off-by: Herman <yanshuaijun@yulong.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
When ctx_id >= HVA_MAX_INSTANCES in hva_hw_its_irq_thread() it tries to
access fields of ctx that is NULL at that point. The patch gets rid of
these accesses.
Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Evgeny Novikov <novikov@ispras.ru>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Handle errors of clk_prepare_enable() in csi2rx_get_resources().
Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Evgeny Novikov <novikov@ispras.ru>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Handle errors of clk_prepare_enable() in csi2tx_get_resources().
Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Evgeny Novikov <novikov@ispras.ru>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Variable ret is being assigned a value however the assignment is
never read, so this redundant assignment can be removed.
Clean up the following clang-analyzer warning:
drivers/media/platform/sti/delta/delta-v4l2.c:1010:4: warning: Value
stored to 'ret' is never read [clang-analyzer-deadcode.DeadStores].
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Variable i is being assigned a value however the assignment is
never read, so this redundant assignment can be removed.
Clean up the following clang-analyzer warning:
drivers/media/platform/atmel/atmel-isc-base.c:975:2: warning: Value
stored to 'i' is never read [clang-analyzer-deadcode.DeadStores].
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
There is a error message within devm_ioremap_resource
already, so remove the dev_err call to avoid redundant
error message.
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Use the devm_platform_ioremap_resource_byname() helper instead of
calling platform_get_resource_byname() and devm_ioremap_resource()
separately.
Signed-off-by: Ding Senjie <dingsenjie@yulong.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Enable support for M3-W+ (r8a77961).
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Tested-by: LUU HOAI <hoai.luu.ub@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Enable support for M3-W+ (r8a77961).
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Tested-by: LUU HOAI <hoai.luu.ub@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
In isp_video_release, file->private_data is freed via
_vb2_fop_release()->v4l2_fh_release(). But the freed
file->private_data is still used in v4l2_fh_is_singular_file()
->v4l2_fh_is_singular(file->private_data), which is a use
after free bug.
My patch uses a variable 'is_singular_file' to avoid the uaf.
v3: https://lore.kernel.org/patchwork/patch/1419058/
Fixes: 34947b8aebe3f ("[media] exynos4-is: Add the FIMC-IS ISP capture DMA driver")
Signed-off-by: Lv Yunlong <lyl2019@mail.ustc.edu.cn>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
disable_irq() after request_irq() still has a time gap in which
interrupts can come. request_irq() with IRQF_NO_AUTOEN flag will
disable IRQ auto-enable because of requesting.
this patch is made base on "add IRQF_NO_AUTOEN for request_irq" which
is being merged: https://lore.kernel.org/patchwork/patch/1388765/
Signed-off-by: Tian Tao <tiantao6@hisilicon.com>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
The result of an expression consisting of a single relational operator is
already of the bool type and does not need to be evaluated explicitly.
No functional change.
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Set the FW to run in low power for encoder
to accommodate more session without losing much on quality.
Signed-off-by: Dikshita Agarwal <dikshita@codeaurora.org>
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
There is a regular need in the kernel to provide a way to declare having
a dynamically sized set of trailing elements in a structure. Kernel code
should always use “flexible array members”[1] for these cases. The older
style of one-element or zero-length arrays should no longer be used[2].
Use flexible-array member in struct hfi_sys_set_property_pkt instead of
one-element array.
Also, this helps with the ongoing efforts to enable -Warray-bounds and
fix the following warnings:
drivers/media/platform/qcom/venus/hfi_cmds.c: In function ‘pkt_sys_coverage_config’:
drivers/media/platform/qcom/venus/hfi_cmds.c:57:11: warning: array subscript 1 is above array bounds of ‘u32[1]’ {aka ‘unsigned int[1]’} [-Warray-bounds]
57 | pkt->data[1] = mode;
| ~~~~~~~~~^~~
[1] https://en.wikipedia.org/wiki/Flexible_array_member
[2] https://www.kernel.org/doc/html/v5.9/process/deprecated.html#zero-length-and-one-element-arrays
Link: https://github.com/KSPP/linux/issues/79
Link: https://github.com/KSPP/linux/issues/109
Build-tested-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/lkml/602416da.iZqae7Dbk7nyl6OY%25lkp@intel.com/
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Use resource-managed OPP API to simplify code.
Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
The conceal color property used for Venus v4 and v6 has the same
payload structure. But currently v4 follow down to payload
structure for v1. Correct this by moving set_property to v4.
Fixes: 4ef6039fad8f ("media: venus: vdec: Add support for conceal control")
Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Linux 5.13-rc4
* tag 'v5.13-rc4': (976 commits)
Linux 5.13-rc4
seccomp: Refactor notification handler to prepare for new semantics
selftests: kvm: fix overlapping addresses in memslot_perf_test
KVM: X86: Kill off ctxt->ud
KVM: X86: Fix warning caused by stale emulation context
KVM: X86: Use kvm_get_linear_rip() in single-step and #DB/#BP interception
Documentation: seccomp: Fix user notification documentation
MAINTAINERS: adjust to removing i2c designware platform data
perf vendor events powerpc: Fix eventcode of power10 JSON events
Revert "serial: 8250: 8250_omap: Fix possible interrupt storm"
i2c: s3c2410: fix possible NULL pointer deref on read message after write
i2c: mediatek: Disable i2c start_en and clear intr_stat brfore reset
perf stat: Fix error check for bpf_program__attach
cifs: change format of CIFS_FULL_KEY_DUMP ioctl
i2c: i801: Don't generate an interrupt on bus reset
i2c: mpc: implement erratum A-004447 workaround
powerpc/fsl: set fsl,i2c-erratum-a004447 flag for P1010 i2c controllers
powerpc/fsl: set fsl,i2c-erratum-a004447 flag for P2041 i2c controllers
dt-bindings: i2c: mpc: Add fsl,i2c-erratum-a004447 flag
i2c: busses: i2c-stm32f4: Remove incorrectly placed ' ' from function name
...
|
|
We need the driver core fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
A typo there is causing two warnings:
drivers/media/platform/davinci/vpif_display.c:114: warning: Function parameter or member 'nplanes' not described in 'vpif_buffer_queue_setup'
drivers/media/platform/davinci/vpif_capture.c:112: warning: Function parameter or member 'nplanes' not described in 'vpif_buffer_queue_setup'
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Commit dd8088d5a896 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter")
added pm_runtime_resume_and_get() in order to automatically handle
dev->power.usage_count decrement on errors.
Use the new API, in order to cleanup the error check logic.
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Commit dd8088d5a896 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter")
added pm_runtime_resume_and_get() in order to automatically handle
dev->power.usage_count decrement on errors.
Use the new API, in order to cleanup the error check logic.
As a bonus, pm_runtime_resume_and_get() always return 0 on success.
So, the code can be simplified.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Commit dd8088d5a896 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter")
added pm_runtime_resume_and_get() in order to automatically handle
dev->power.usage_count decrement on errors.
Use the new API, in order to cleanup the error check logic.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
|
Commit dd8088d5a896 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter")
added pm_runtime_resume_and_get() in order to automatically handle
dev->power.usage_count decrement on errors.
Use the new API, in order to cleanup the error check logic.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
|
