summaryrefslogtreecommitdiff
path: root/drivers/media/platform/rockchip/rkisp1
AgeCommit message (Collapse)AuthorFilesLines
2023-10-12media: rkisp1: Remove dual crop control register from config structureLaurent Pinchart1-7/+4
The dual crop register is the same for both the MP and SP channels. Drop it from the rkisp1_rsz_config structure and use the RKISP1_CIF_DUAL_CROP_CTRL macro directly in the code. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-10-12media: rkisp1: Fix line stride calculationLaurent Pinchart1-7/+13
The line stride is expressed in the hardware as a number of pixels for the first plane. The bytesperline must thus be a multiple of the first plane's bpp value. Enforce this constraint. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-10-12media: rkisp1: Constify rkisp1_v12_params_opsLaurent Pinchart1-1/+1
The rkisp1_v12_params_ops global variable doesn't need to be modified. Make it const. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-10-12media: rkisp1: Convert hex constants to lowercaseLaurent Pinchart2-311/+311
Hex constants in the media subsystem are typically in lowercase. The rkisp1 driver mostly follows that convention already, except in the register definitions. Convert all hex constants to lowercase for consistency. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-10-12media: rkisp1: csi: Use V4L2 subdev active stateLaurent Pinchart2-80/+33
Use the V4L2 subdev active state API to store the active format and crop rectangle. This simplifies the driver not only by dropping the state stored in the rkisp1_csi structure, but also by replacing the ops_lock with the state lock. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-10-12media: rkisp1: isp: Use V4L2 subdev active stateLaurent Pinchart2-165/+102
Use the V4L2 subdev active state API to store the active format and crop rectangle. This simplifies the driver not only by dropping the state stored in the rkisp1_isp structure, but also by replacing the ops_lock with the state lock. The rkisp1_isp.sink_fmt field needs to be kept, as it is accessed from the stats interrupt handler. To simplify the rkisp1_isp_set_sink_fmt() implementation, the field is now set when starting the ISP, instead of when setting the format. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-10-12media: rkisp1: resizer: Use V4L2 subdev active stateLaurent Pinchart2-124/+66
Use the V4L2 subdev active state API to store the active format and crop rectangle. This simplifies the driver not only by dropping the state stored in the rkisp1_resizer structure, but also by replacing the ops_lock with the state lock. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-08-10media: v4l: async: Set v4l2_device and subdev in async notifier initSakari Ailus1-2/+2
Set the v4l2_device already in async notifier init, so struct device related to it will be available before the notifier is registered. This requires separating notifier initialisation into two functions, one that takes v4l2_device as its argument, v4l2_async_nf_init and v4l2_async_subdev_nf_init, for sub-device notifiers. Registering the notifier will use a single function, v4l2_async_nf_register. This is done in order to make struct device available earlier, during construction of the async connections, for sensible debug prints. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Tested-by: Philipp Zabel <p.zabel@pengutronix.de> # imx6qp Tested-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> # rcar + adv746x Tested-by: Aishwarya Kothari <aishwarya.kothari@toradex.com> # Apalis i.MX6Q with TC358743 Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> # Renesas RZ/G2L SMARC Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-07-28media: v4l: async: Obtain async connection based on sub-deviceSakari Ailus2-3/+12
Add v4l2_async_connection_unique() function for obtaining a struct v4l2_async_connection, typically allocated by drivers together with their own information on an external sub-device. The relation between connections and sub-devices still remains 1:1 but this code becomes more complex when the relation soon changes. Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Tested-by: Philipp Zabel <p.zabel@pengutronix.de> # imx6qp Tested-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> # rcar + adv746x Tested-by: Aishwarya Kothari <aishwarya.kothari@toradex.com> # Apalis i.MX6Q with TC358743 Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> # Renesas RZ/G2L SMARC Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-07-28media: v4l: async: Rename v4l2_async_subdev as v4l2_async_connectionSakari Ailus2-5/+5
Rename v4l2_async_subdev as v4l2_async_connection, in order to differentiate between the sub-devices and their connections: one sub-device can have many connections but the V4L2 async framework has so far allowed just a single one. Connections in this context will later translate into either MC ancillary or data links. This patch prepares changing that relation by changing existing users of v4l2_async_subdev to switch to v4l2_async_connection. Async sub-devices themselves will not be needed anymore Additionally, __v4l2_async_nf_add_subdev() has been renamed __v4l2_async_nf_add_connection(). Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Tested-by: Philipp Zabel <p.zabel@pengutronix.de> # imx6qp Tested-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> # rcar + adv746x Tested-by: Aishwarya Kothari <aishwarya.kothari@toradex.com> # Apalis i.MX6Q with TC358743 Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> # Renesas RZ/G2L SMARC Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2023-07-19media: Explicitly include correct DT includesRob Herring1-1/+1
The DT of_device.h and of_platform.h date back to the separate of_platform_bus_type before it as merged into the regular platform bus. As part of that merge prepping Arm DT support 13 years ago, they "temporarily" include each other. They also include platform_device.h and of.h. As a result, there's a pretty much random mix of those include files used throughout the tree. In order to detangle these headers and replace the implicit includes with struct declarations, users need to explicitly include the correct includes. Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-04-12media: Fix indentation issues introduced by subdev-wide state structLaurent Pinchart1-7/+7
Commit 0d346d2a6f54 ("media: v4l2-subdev: add subdev-wide state struct") applied a large media tree-wide change produced by coccinelle. It was so large that a set of identical indentation issues went unnoticed during review. Fix them. While at it, and because it's easy to review both changes together, add a trailing comma for the last (and only) struct member initialization of the related structures, to avoid future changes should new fields need to be initialized. Fixes: 0d346d2a6f54 ("media: v4l2-subdev: add subdev-wide state struct") Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-04-11media: rkisp1: Implement ENUM_FRAMESIZESPaul Elder1-0/+30
Implement VIDIOC_ENUM_FRAMESIZES for the rkisp1 capture devices. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Dafna Hirschfeld <dafna@fastmail.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-04-11media: rkisp1: Add NV16M and NV61M to output formatsPaul Elder1-0/+22
Add support for NV16M and NV61M as output formats. As NV16, NV61, NV12M and NV21M are already supported, the infrastructure is already in place to support NV16M and NV61M, so it is sufficient to simply add relevant entries to the list of output formats. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Dafna Hirschfeld <dafna@fastmail.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-04-11media: rkisp1-dev: Convert to platform remove callback returning voidUwe Kleine-König1-4/+2
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is (mostly) ignored and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new() which already returns void. Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2023-02-08media: rkisp1: make a few const arrays staticColin Ian King1-6/+9
Don't populate the const arrays on the stack, instead make them static. Also makes the object code smaller. Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-11-04media: rkisp1: make const arrays ae_wnd_num and hist_wnd_num staticColin Ian King1-2/+2
Don't populate the const arrays on the stack, instead make them static. Also makes the object code smaller. Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
2022-09-24media: drivers: use video device pipeline start/stopTomi Valkeinen1-5/+5
Convert the media drivers to use video device based pipeline start/stop where possible. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-09-24media: mc: entity: Rename streaming_count -> start_countTomi Valkeinen1-2/+2
'streaming_count' is a bit misleading name, as the count is increased with media_pipeline_start(). Let's rename it to 'start_count' instead. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-09-24media: rkisp1: Zero v4l2_subdev_format fields in when validating linksLaurent Pinchart1-3/+4
The local sd_fmt variable in rkisp1_capture_link_validate() has uninitialized fields, which causes random failures when calling the subdev .get_fmt() operation. Fix it by initializing the variable when declaring it, which zeros all other fields. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Dafna Hirschfeld <dafna@fastmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-09-24media: rkisp1: Configure LSC after enabling the ISPLaurent Pinchart3-64/+143
The ISP8000Nano v18.02 (found in the i.MX8MP) requires the ISP to be enabled (as indicated by the ISP_CTRL.ISP_ENABLE bit) to configure the lens shading table in internal RAM. The driver currently configures all ISP initial parameters before enabling the ISP, which causes the LSC RAM to not be initialized properly. To fix this, split the rkisp1_params_configure() function into a rkisp1_params_pre_configure() and a rkisp1_params_post_configure(). The former configures all ISP parameters but LSC, while the latter configures LSC. To implement this, the rkisp1_params_apply_params_cfg() function is deconstructed, with two small helpers created to deal with the parameters buffers, which are then used in rkisp1_params_isr(), rkisp1_params_pre_configure() and rkisp1_params_post_configure(). While this initialization ordering is only needed for the ISP8000Nano v18.02, it doesn't affect other ISP versions negatively, and can thus be followed unconditionally. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Dafna Hirschfeld <dafna@fastmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-09-24media: rkisp1: Use correct macro for gradient registersLaurent Pinchart2-3/+3
The rkisp1_lsc_config() function incorrectly uses the RKISP1_CIF_ISP_LSC_SECT_SIZE() macro for the gradient registers. Replace it with the correct macro, and rename it from RKISP1_CIF_ISP_LSC_GRAD_SIZE() to RKISP1_CIF_ISP_LSC_SECT_GRAD() as the corresponding registers store the gradients for each sector, not a size. This doesn't cause any functional change as the two macros are defined identically (the size and gradient registers store fields in the same number of bits at the same positions). Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Dafna Hirschfeld <dafna@fastmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-09-24media: rkisp1: Simplify LSC x/y size and grad register macrosLaurent Pinchart2-20/+8
The LSC module x/y size and grad configuration is stored in a set of 4 indexed registers each. The rkisp1-regs.h header defines all those registers, but only the first one in each set is used, with manual calculation of addresses of subsequent registers. Simplifies this by merging all 4 register macros into one that takes the index as a parameter. No functional change intended. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Dafna Hirschfeld <dafna@fastmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-09-24media: rkisp1: Store LSC register values in u32 variablesLaurent Pinchart1-4/+6
Use the u32 type instead of unsigned int to store register values in the LSC configuration code, to make the variables' size more explicit. No functional change intended. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Dafna Hirschfeld <dafna@fastmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-09-24media: rkisp1: Clean up LSC configuration codeLaurent Pinchart1-113/+86
Clean up the LSC configuration code to improve its readability by shortening lines, using extra local variables and renaming long variables. No functional change intended. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Dafna Hirschfeld <dafna@fastmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-09-24media: rkisp1: Allow setting color space on resizer sink padLaurent Pinchart1-3/+38
The resizer doesn't deal with color spaces, so it can accept any color space on its input, and propagates it unchanged to its output. When operating with a Bayer input format (in pass-through mode) further restrict the YCbCr encoding and quantization to Rec 601 and full range respectively, as for raw data the former ought to be ignored and the latter is always full range. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Dafna Hirschfeld <dafna@fastmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-09-24media: rkisp1: Initialize color space on resizer sink and source padsLaurent Pinchart1-0/+4
Initialize the four color space fields on the sink and source video pads of the resizer in the .init_cfg() operation. The resizer can't perform any color space conversion, so set the sink and source color spaces to the same defaults, which match the ISP source video pad default. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Dafna Hirschfeld <dafna@fastmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-09-24media: rkisp1: Configure CSM based on YCbCr encodingLaurent Pinchart3-21/+84
The driver currently only implements the Rec. 601 YCbCr encoding, extend it with support for the other encodings defined by V4L2 (Rec. 709, Rec. 2020 and SMPTE240m). The coefficients have been calculated by rounding the floating point values to the nearest Q1.7 fixed-point value, adjusting the rounding to ensure that the sum of each line in the matrix is preserved to avoid overflows. At the hardware level, the RGB to YUV conversion matrix is fully configurable, custom encoding could be supported by extending the ISP parameters if desired. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Dafna Hirschfeld <dafna@fastmail.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-09-24media: rkisp1: Don't pass the quantization to rkisp1_csm_config()Laurent Pinchart1-7/+3
The rkisp1_csm_config() function takes a pointer to the rkisp1_params structure which contains the quantization value. There's no need to pass it separately to the function. Drop it from the function parameters. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Dafna Hirschfeld <dafna@fastmail.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-09-24media: rkisp1: Configure quantization using ISP source padLaurent Pinchart1-1/+1
The rkisp1_config_isp() function uses the format on the sink pad of the ISP to configure quantization at the output of the ISP. This is incorrect, as hinted by the src_frm variable name that stores the format. Fix it by using the source pad. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Dafna Hirschfeld <dafna@fastmail.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-09-24media: rkisp1: Allow setting all color space fields on ISP source padLaurent Pinchart1-7/+48
The ISP output color space is configured through the ISP source pad. At the moment, only the quantization can be set. Extend it to the three other color space fields: - The ycbcr_enc field will be used to configure the RGB to YUV matrix (currently hardcoded to Rec. 601). - The colorspace (which controls the color primaries) and xfer_func fields will not be used to configure the ISP, as the corresponding hardware blocks (the cross-talk RGB to RGB matrix and the tone mapping curve) are programmed directly by applications through ISP parameters. Nonetheless, those two fields should be set by applications to match the ISP configuration, in order to propagate the correct color space down the pipeline up to the capture video nodes. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Dafna Hirschfeld <dafna@fastmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-09-24media: rkisp1: Fix source pad format configurationLaurent Pinchart1-8/+32
The ISP converts Bayer data to YUV when operating normally, and can also operate in pass-through mode where the input and output formats must match. Converting from YUV to Bayer isn't possible. If such an invalid configuration is attempted, adjust it by copying the sink pad media bus code to the source pad. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Dafna Hirschfeld <dafna@fastmail.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-09-24media: rkisp1: Allow setting color space on ISP sink padLaurent Pinchart1-0/+31
The ISP accepts different color spaces on its input: for YUV input, it doesn't set any restrictions, and for Bayer inputs, any color primaries or transfer function can be accepted (YCbCr encoding isn't applicable there, and quantization range can only be full). Allow setting a color space on the ISP sink pad, with the aforementioned restrictions. The settings don't influence hardware yet (only the YUV quantization range will, anything else has no direct effect on the ISP configuration), but can already be set to allow color space information to be coherent across the ISP sink link. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Dafna Hirschfeld <dafna@fastmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-09-24media: rkisp1: Initialize color space on ISP sink and source padsLaurent Pinchart1-0/+10
Initialize the four color space fields on the sink and source video pads of the ISP in the .init_cfg() operation. As the main use case for the ISP is to convert Bayer data to YUV, select a raw color space on the sink pad and a limited range quantization of SYCC on the source pad by default. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Dafna Hirschfeld <dafna@fastmail.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-09-24media: rockchip: rkisp1: Define macros for DPCC configurations in UAPILaurent Pinchart1-1/+0
Extend the UAPI rkisp1-config.h header with macros for all DPCC configuration fields. While at it, clarify of fix issues in the DPCC documentation. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Dafna Hirschfeld <dafna@fastmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-09-24media: rockchip: rkisp1: Mask invalid bits in DPCC parametersLaurent Pinchart2-29/+41
Restrict the DPCC configuration that can be set by userspace to valid register bits. To do so, reorganize the related register macros to define valid bitmasks, as well as bits of the DPCC mode register. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Dafna Hirschfeld <dafna@fastmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-09-24media: rockchip: rkisp1: Set DPCC methods enable bits inside loopLaurent Pinchart1-6/+4
The rkisp1_dpcc_config() function looks over methods sets to configure them, but sets the RKISP1_CIF_ISP_DPCC_METHODS_SET_* registers outside of the loop with hand-unrolled code. Move this to the loop to simplify the code. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Dafna Hirschfeld <dafna@fastmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-07-17media: rkisp1: debug: Add dump file in debugfs for MI main path registersPaul Elder1-0/+21
Add a register dump file in debugfs for some of the buffer-related registers for the main path in MI (for the base address, the size, and the offset). Also dump the corresponding shadow registers. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Dafna Hirschfeld <dafna@fastmail.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-07-17media: rkisp1: Make the internal CSI-2 receiver optionalLaurent Pinchart1-16/+34
Not all ISP versions integrate a MIPI CSI-2 receiver. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Dafna Hirschfeld <dafna@fastmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-07-17media: rkisp1: Add infrastructure to support ISP featuresLaurent Pinchart2-0/+17
Different ISP versions implement different sets of features. The driver already takes the version into account in several places, but this approach won't scale well for features that are found in different versions. Introduce a new mechanism using a features bitmask in the rkisp1_info structure to indicate which features the ISP support. The first feature bit tells if the ISP has an internal CSI-2 receiver, which is not available in all ISP versions. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Dafna Hirschfeld <dafna@fastmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-07-17media: rkisp1: Support the ISP parallel inputPaul Elder3-11/+77
The ISP has a parallel input, exposed through port 1 in the device tree node. While the driver supports configuring the ISP for the parallel and BT.656 input modes, the DT parsing code, the subdev bound handler and the ISP stream start handler only support the CSI input. Extend them to support the parallel input. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Dafna Hirschfeld <dafna@fastmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-07-17media: rkisp1: Use fwnode_graph_for_each_endpointPaul Elder1-24/+20
When registering the notifier, replace the manual while loop with fwnode_graph_for_each_endpoint. This simplifies error handling. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Dafna Hirschfeld <dafna@fastmail.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-07-17media: rkisp1: csi: Plumb the CSI RX subdevLaurent Pinchart4-56/+75
Connect the CSI receiver subdevice between the sensors and the ISP. This includes: - Calling the subdevice via the v4l2 subdev API - Moving the async notifier for the sensor from the ISP to the CSI receiver - In the ISP, create a media link to the CSI receiver, and remove the media link creation to the sensor - In the CSI receiver, create a media link to the sensor Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Dafna Hirschfeld <dafna@fastmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-07-17media: rkisp1: csi: Implement a V4L2 subdev for the CSI receiverPaul Elder4-4/+329
The CSI receiver is a component separate from the ISP or the resizers. It is actually optional, not all device model include a CSI receiver. On some SoCs CSI-2 support can be provided through an external CSI-2 receiver, connected to the ISP's parallel input. To support those use cases, create a V4L2 subdev to model the CSI receiver. It will allow the driver to handle both internal and external CSI receivers the same way. The next commit will plumb the CSI subdev to the rest of the driver, replacing direct function calls. Signed-off-by: Paul Elder <paul.elder@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Dafna Hirschfeld <dafna@fastmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-07-17media: rkisp1: isp: Disallow multiple active sourcesLaurent Pinchart1-17/+13
The ISP supports multiple source subdevs, but can only capture from a single one at a time. The source is selected through link setup. The driver finds the active source in its .s_stream() handler using the media_entity_remote_pad() function. This fails to reject invalid configurations with multiple active sources. Fix it by using the media_pad_remote_pad_unique() helper instead, and inline rkisp1_isp_get_source() in rkisp1_isp_s_stream() as the function is small and has a single caller. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Reviewed-by: Dafna Hirschfeld <dafna@fastmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-07-17media: rkisp1: isp: Rename rkisp1_get_remote_source()Laurent Pinchart1-2/+2
Rename the rkisp1_get_remote_source() function to rkisp1_isp_get_source() to use a consistent rkisp1_isp_* prefix for all ISP functions, and drop the "remote" as the source can't be local. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Dafna Hirschfeld <dafna@fastmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-07-17media: rkisp1: isp: Constify various local variablesLaurent Pinchart1-5/+5
A set of local variables point to structure that are not meant to be modified. Constify them. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Dafna Hirschfeld <dafna@fastmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-07-17media: rkisp1: isp: Fix whitespace issuesLaurent Pinchart1-3/+5
Add missing blank lines after variable declaration blocks, and fix indentation issues. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Dafna Hirschfeld <dafna@fastmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-07-17media: rkisp1: isp: Initialize some variables at declaration timeLaurent Pinchart1-3/+2
Initialize the src_fmt and sink_fmt variable when declaring them in rkisp1_config_isp(). Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Dafna Hirschfeld <dafna@fastmail.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
2022-07-17media: rkisp1: isp: Merge ISP_ACQ_PROP configuration in single variableLaurent Pinchart1-8/+8
The rkisp1_config_isp() function stores the value of the input selection and polarity configuration in two different local variables, OR'ed together when writing the register. Merge them into a single acq_prop variable. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Dafna Hirschfeld <dafna@fastmail.com> Reviewed-by: Paul Elder <paul.elder@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-25 14:29:55 +0300